HomeMy WebLinkAbout2659 SUTTER ST; ; CBR2025-0465; PermitPrint Date: 04/17/2025
Building Permit Finaled
Residential Permit
CBR2025-0465Permit No:
Job Address:
Permit Type:
Parcel #:
Valuation:
Occupancy Group:
2659 SUTTER ST, CARLSBAD, CA 92010-7905
BLDG-Residential
1675120200
$13,280.00
Work Class:
Lot #:
Project #:
Reroof
Status:
Applied:
Issued:
02/24/2025
02/26/2025
Finaled Close Out:04/17/2025
#of Dwelling Units:
Track #:
Plan #:
Closed - Finaled
Plan Check #:
Orig. Plan Check #:Bathrooms:
Final Inspection:04/04/2025Bedrooms:Construction Type:
Occupant Load:
Code Edition:
Sprinkled:
INSPECTOR:Cornair, Brad
Kersch, Tim
REMOVE AND SET ASIDE APPROXIMATELY 32SQ. OF EXISTING TILE. REMOVE AND REPLACE UNDERLAYMENT. RESET THE TILE
(E-REVIEW)
Description:
Project Title:
Applicant:
TWM ROOFING
LYNETTE FARLEY4157 VALLE DEL SOL
BONSALL, CA 92003-4907
Contractor:
TWM ROOFING INC
TOM MARSHALL165 ACACIA AVE
CARLSBAD, CA 92008-3202
(760) 731-0777
AMOUNTFEE
REROOFING – RESIDENTIAL $87.00
SB1473 – GREEN BUILDING STATE STANDARDS FEE $1.00
STRONG MOTION – RESIDENTIAL (SMIP)$1.73
Total Fees:$89.73 Total Payments To Date:$89.73 Balance Due:$0.00
Please take NOTICE that approval of your project includes the "Imposition" of fees, dedications, reservations, or other exactions hereafter
collectively referred to as "fees/exaction." You have 90 days from the date this permit was issued to protest imposition of these
fees/exactions. If you protest them, you must follow the protest procedures set forth in Government Code Section 66020(a), and file the protest and any other required information with the City Manager for processing in accordance with Carlsbad Municipal Code Section
3.32.030. Failure to timely follow that procedure will bar any subsequent legal action to attack, review, set aside, void, or annul their
imposition.
You are hereby FURTHER NOTIFIED that your right to protest the specified fees/exactions DOES NOT APPLY to water and sewer connection
fees and capacity changes, nor planning, zoning, grading or other similar application processing or service fees in connection with this
project. NOR DOES IT APPLY to any fees/exactions of which you have previously been given a NOTICE similar to this, or as to which the
statute of limitation has previously otherwise expired.
1635 Faraday Avenue, Carlsbad CA 92008-7314 ï 442-339-2719 ï 760-602-8560 f ï www.carlsbadca.gov
Building Division Page 1 of 1
RESIDENTIAL BUILDING PERMIT
APPLICATION B-1
Plan Check
Est. Value
PC Deposit
Date
Job Address Unit: APN:
CT/Project #: Lot #: Year Built:
BRIEF DESCRIPTION OF WORK:
PRIMARY APPLICANT PROPERTY OWNER
Name: Name:
Address: Address:
City: State: Zip: City: State: Zip:
Phone: Phone:
Email: Email:
DESIGN PROFESSIONAL CONTRACTOR OF RECORD
Name: Business Name:
Address:
City: State: Zip:
Phone:
Email:
Architect State License:
Address:
City: State: Zip:
Phone:
Email:
CSLB License #: Class:
Carlsbad Business License # (Required):
APPLICANT CERTIFICATION: I certify that I have read the application and state that the above information is correct and that the information of the plans is accurate. I agree to comply with all City ordinances and State laws relating to building construction.
NAME (PRINT): DATE:
1635 Faraday Ave Carlsbad, CA 92008
SIGN:
Ph: 442-339-2719 Email: Building@carlsbadca.gov
1 REV. 04/22
New SF : Living SF, _ Deck SF, Patio SF, Garage SF
Is this to create an Accessory Dwelling Unit? Y N New Fireplace? Y N , if yes how many? _________
Solar: KW, Modules, Mounted: Roof Ground, Tilt: Y N, RMA: Y N,
Battery: Y N, Panel Upgrade: Y N
Other:
Additional Gas or Electrical Features? Pool/Spa: SF
Is the area a conversion or change of use? Y N Remodel: SF of affected area
Electric Meter number: _____________________________
2659 Sutter St. Carlsbad, CA 92010
Reroof -
X
Reroof -
Kenia Pedroza Leslie Venolia
4157 Valle Del Sol 2659 Sutter St
Bonsall CA 92003 Carlsbad CA 92010
760-731-0777 760-845-9497
info@twmroofing.com landolia2@gmail.com
TWM Roofing, Inc.
4157 Valle Del Sol
Bonsall CA 92003
760-731-0777
info@twmroofing.com
519845 C39
1233312
02/24/2025Kenia Pedroza
THIS PAGE REQUIRED AT PERMIT ISSUANCE PLAN CHECK NUMBER:__________________
A BUILDING PERMIT CAN BE ISSUED TO EITHER A STATE LICENSED CONTRACTOR OR A PROPERTY OWNER. IF THE PERSON SIGNING
THIS FORM IS AN AGENT FOR EITHER ENTITY AN AUTHORIZATION FORM OR LETTER IS REQUIRED PRIOR TO PERMIT ISSUANCE.
(OPTION A): LICENSED CONTRACTOR DECLARATION:
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3
of the Business and Professions Code, and my license is in full force and effect. I also affirm under penalty of perjury one of the
following declarations (CHOOSE ONE):
I have and will maintain a certificate of consent to self-insure for workers’ compensation provided by Section 3700 of the Labor Code, for the performance of the
work which this permit is issued. Policy No.
-OR-
I have and will maintain worker’s compensation, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued.
My workers’ compensation insurance carrier and policy number are: Insurance Company Name:
Policy No. _____________________________________________________________ Expiration Date:
-OR-
Certificate of Exemption: I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become
subject to the workers’ compensation Laws of California. WARNING: Failure to secure workers compensation coverage is unlawful and shall subject an employer to criminal penalties and civil fines up to $100,000.00, in addition the to the cost of compensation, damages as provided for in Section 3706 of the Labor Code, interest and attorney’s fees.
CONSTRUCTION LENDING AGENCY, IF ANY:
I hereby affirm that there is a construction lending agency for the performance of the work this permit is issued (Sec. 3097 (i) Civil Code).
Lender’s Name: Lender’s Address:
CONTRACTOR CERTIFICATION: The applicant certifies that all documents and plans clearly and accurately show all existing and proposed buildings, structures, access roads, and utilities/utility easements. All proposed modifications and/or additions are clearly labeled on the site plan. Any potentially existing detail within these plans inconsistent with the site plan are
not approved for construction and may be required to be altered or removed. The city’s approval of the application is based on the premise that the submitted documents and plans show the correct dimensions of; the property, buildings, structures and their setbacks from property lines and from one another; access roads/easements, and utilities. The existing and proposed
use of each building as stated is true and correct; all easements and other encumbrances to development have been accurately shown and labeled as well as all on-site grading/site preparation. All improvements existing on the property were completed in accordance with all regulations in existence at the time of their construction, unless otherwise noted.
NAME (PRINT): SIGNATURE: DATE:
Note: If the person signing above is an authorized agent for the contractor provide a letter of authorization on contractor letterhead.
(OPTION B): OWNER-BUILDER DECLARATION:
I hereby affirm that I am exempt from Contractor’s License Law for the following reason:
I, as owner of the property or my employees with wages as their sole compensation, will do the work and the structure is not intended or offered for sale (Sec.
7044, Business and Professions Code: The Contractor’s License Law does not apply to an owner of property who builds or improves thereon, and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner-builder will have the burden of proving that he did not build or improve for the purpose of sale).
-OR-
I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The
Contractor’s License Law does not apply to an owner of property who builds or improves thereon, and contracts for such projects with contractor(s) licensed
pursuant to the Contractor’s License Law). -OR- I am exempt under Business and Professions Code Division 3, Chapter 9, Article 3 for this reason:
AND,
FORM B-61 “Owner Builder Acknowledgement and Verification Form” is required for any permit issued to a property owner.
By my signature below I acknowledge that, except for my personal residence in which I must have resided for at least one year prior to completion of the
improvements covered by this permit, I cannot legally sell a structure that I have built as an owner-builder if it has not been constructed in its entirety by licensed
contractors. I understand that a copy of the applicable law, Section 7044 of the Business and Professions Code, is available upon request when this application is
submitted or at the following Web site: http://www.leginfo.ca.gov/calaw.html.
OWNER CERTIFICATION: The applicant certifies that all documents and plans clearly and accurately show all existing and proposed buildings, structures, access roads, and utilities/utility
easements. All proposed modifications and/or additions are clearly labeled on the site plan. Any potentially existing detail within these plans inconsistent with the site plan are not approved for construction and may be required to be altered or removed. The city’s approval of the application is based on the premise that the submitted documents and plans show the correct
dimensions of; the property, buildings, structures and their setbacks from property lines and from one another; access roads/easements, and utilities. The existing and proposed use of each building as stated is true and correct; all easements and other encumbrances to development have been accurately shown and labeled as well as all on-site grading/site preparation. All
improvements existing on the property were completed in accordance with all regulations in existence at the time of their construction, unless otherwise noted.
NAME (PRINT): SIGN: DATE:
Note: If the person signing above is an authorized agent for the property owner include form B-62 signed by property owner.
1635 Faraday Ave Carlsbad, CA 92008 Ph: 442-339-2719 Email: Building@carlsbadca.gov
2
REV. 04/22
-OR -
X
North Pointe Insurance Company
202000180 06/01/2025
Kenia Pedroza
X
Solid plywood
Concrete Tile A 900
Tile lift/relay
x
TWM Roofing, Inc. - Kenia Pedroza
2659 Sutter St. Carlsbad, CA 92010
6
32
B-70B_REV: June 2022 Page 1 of 1
Residential Building Permit Inspection
Self-Certification Declaration
B-70A
This form is required to participate in the city’s Building Permit Inspection Self-Certification Program (SCP), which
allows for a California-licensed contractor to self-certify that certain residential building construction projects were
completed in compliance with relevant building code standards in-lieu of a final inspection from the city. Refer to
Informational Bulletin IB-270 for additional information and requirements. This form is to be completed and
submitted with a Residential Building Permit application (form B-1).
TO BE COMPLETED BY THE CONTRACTOR/ARCHITECT/ENGINEER
Name License Type and No. Business Address
Phone Email Address Permit No.
Brief description of work being conducted
Declaration
I affirm and certify under penalty of perjury that:
1. I have reviewed and understand the requirements of the City of Carlsbad’s SCP program as detailed in
Informational-Bulletin IB-270 and will comply with those requirements.
2. I have received approval from the property owner to complete the work authorized under the referenced
building permit and made them aware that completed work will be self-certified under this program.
3. I am a California-licensed B General Building Contractor with current worker’s compensation insurance, C-
type Contractor depending on specialty with current worker’s compensation insurance, Civil Engineer or
Structural Engineer, and my license in active.
4. I shall assume responsibility and liability for the overall installation, inspection, and certification of all work
associated with the referenced building permit and will ensure that all work is completed in compliance
with all applicable requirements of the California Building Standards Code as adopted and amended by the
City of Carlsbad and in accordance with any manufacturer’s installation requirements.
5. I have reviewed and understand the requirements set forth in the Self-Certification Inspection Checklist
(Form 70-B) and shall complete, sign, and return the form to the city following completion of all work
authorized under the above referenced building permit.
6. I understand that the city may randomly audit the construction work for quality assurance, and I agree to
provide access to work performed under this program when requested by the City of Carlsbad.
Signature Date
☐ Approved
☐ Denied Staff Name Date
TWM Roofing, Inc. -Kenia Pedroza C39 - 519845 4157 Valle Del Sol; Bonsall, CA 92003
760-731-0777 info@twmroofing.com
Reroof
Form B-70B_REV: June 2022 Page 1 of 4
Residential Building Permit Inspection
Self-Certification Inspection List
B-70B
Completion and return of this form is required in order to complete participation in the city’s Building Permit Self-
Certification Program. Refer to the Residential Building Permit Inspection Self-Certification Declaration (Form B-70A)
that was approved by the city for the building permit requiring final certification. Refer to Informational Bulletin IB-
270 for additional information about the program.
TO BE COMPLETED BY THE CONTRACTOR/ARCHITECT/ENGINEER
The information below must match the same information provided in Form B-70A that was approved for this project
Name License Type and No. Business Address
Phone Email Address Permit No.
Brief description of work being conducted
Declaration
I affirm and certify under penalty of perjury that:
1.The information provided in Form B-70A remains true and accurate (attach a copy of the form).
2.All work authorized under the referenced permit was installed in compliance with approved building permit,
plans and manufacturer installation instructions and/or listing.
3.All work authorized under the referenced permit was installed in compliance with relevant state and city
building code standards.
4.All work authorized under the referenced permit was installed in compliance with relevant requirements
listed in checklist that is attached hereto.
Signature Date
Upload completed form to the Customer Self-Service Portal HERE. E-mail all other completed forms to:
bldginspections@carlsbadca.gov. Include the permit number in the subject line of the email, along with the
caption “Attention Self-Certification Program.” After the completed document has been received and processed
by the city, the document will be scanned into the city’s Laserfiche online permit history research application,
which can be accessed at: https://records.carlsbadca.gov/WebLink/ . Additionally, the department’s permit
tracking system will be updated to reflect a “passed” inspection, an email will be sent to the point of contact on
for the building permit notifying them of the determination, and the permit closed out.
☐Approved
☐Denied Staff Name Date
TWM Roofing, Inc. Kenia Pedroza C39 - 519845 4157 Valle Del Sol; Bonsall, CA 92003
760-731-0777 info@twmroofing.com
Reroof
Form B-70B_REV: June 2022 Page 2 of 4
INSTALLATION REQUIREMENTS BY PERMIT TYPE
Please check the appropriate checkboxes for the work authorized under this program to confirm that the identified
installation requirements have been met at the time of work completion. All checkboxes must be filled in order to
qualify for self-certification.
☐ Re-roof
☐ No structural changes
☐ Removed water-soaked or deteriorated elements and replaced with competent material
☐ If new roof diaphragm has been installed, code-compliant fasteners installed
☐ Verified all existing vents were extended through roof per code and painted
☐ Provided minimum clearances to combustible material for B Vent(s) or Chimney(s) per code
☐ Installed flashing and counterflashing per code
☐ Installed underlayment per code
☐ Installed a class A rated roof
☐ Installed roof covering per code (include completed waste management form B-59 for concrete tile
recycling showing proof of a minimum 65% recyclables)
☐ If a built-up roof was installed, designed slope to be minimum of 2% per code
☐ Code-compliant attic ventilation, Wildland Urban Interface compliant
☐ Cool Roof Rating Council product certification, CF2R forms completed and included as necessary
☐ Re-plumbing/piping
☐ Installed a listed potable water piping system
☐ Pipe material is approved for the location installed
☐ Sized the piping per code
☐ Secured, insulated, and isolated per code
☐ Reamed all piping
☐ Removed all excess flux
☐ Thoroughly flushed the system
☐ Electrically grounded the system (if metallic)
☐ If plastic water system, affix sticker located at meter main stipulating: “No ground required, plastic
water piping.”
☐ Restored the integrity of the firewall
☐ Installed an anti-siphon valve at each new hose bib
☐ Insured that the maximum water pressure does not exceed 80 p.s.i.
☐ Protected all piping
☐ Completed all insulation, drywall, taping, mud, and painting
☐ Heating, Ventilation, and Air Conditioning replacement (HVAC)
This permit may cover a new or replacement heater and/or air conditioner
☐ Grounded per code
☐ No new gas or electric lines are being installed ☐ Fused correctly per manufacturers name plate ☐ Liquid tight conduit secured ☐ Line set 3/4” wall insulation, UV-resistant exterior or protected
Form B-70B_REV: June 2022 Page 3 of 4
☐ Disconnect and circuit sized per name plate rating and installed per code
☐ Condenser set on a level and secure platform ☐ Code required working clearances (30” wide x 36” deep) for electrical disconnect ☐ Openings into building sealed ☐ CF1R, CF2R, CF3R registered forms completed and included as necessary ☐ Exterior refrigerant service ports fitted with tamper-resistant locking cap
☐ Condenser installed outside of required side or rear yard setbacks
☐ Water Heater
This permit shall only cover replacement of existing storage tank water heaters. This permit does not cover
installation of a tankless or solar type water heater.
☐ 18” raised platform or per manufacturer’s listing ☐ P/T drain to exterior as per code ☐ Water lines insulated for 5’ minimum or to wall ☐ Shut off valve installed on cold water side ☐ Gas line secure with sediment trap
☐ New gas flexible connector and sized correctly
☐ Flue vent intact, secured, still serviceable ☐ Flue cap and diverter in place ☐ Code compliant flue vent clearances ☐ Clearances for replacement water heater per manufacturer ☐ Combustion air vents properly sized and located per code
☐ Evaluated other exhaust systems for possible draw down of flue gases in vent.
☐ Earthquake strapping per code ☐ Vacuum relief valve for attic installs ☐ Drain pan with separate discharge for attic installations or as required by manufacturer ☐ Access, walkway, working space and headroom for attic installs ☐ Switched lighting for attic installations
☐ No “pit” situations where LPG could pool
☐ Expansion tank or listed device as required is installed ☐ CF1R, CF2R, CF3R registered forms completed and included as necessary
Additional items specific to electric water heater:
☐ Electrical disconnect sized and installed per code, hard wired with correct conductors, conduit
and properly grounded ☐ Minimum 18” platform
☐ Applicable code requirements that apply to gas type water heaters
☐ Insulation Installation ☐ All insulation material, including facing, such as vapor barrier or breather paper installed within floor-
ceiling assemblies, walls, crawl spaces or attics, shall have a Flame spread rating not to exceed 25 and a
smoke density not to exceed 450.
☐ Check all clearances from B vents, flues, combustible air chases, ducts and ventilation.
Form B-70B_REV: June 2022 Page 4 of 4
☐ Seal all floor sill plates and exterior openings. Make sure all surfaces are clean prior to sealing.
☐ Minimum R-38 attic insulation installed
☐ Rough frame inspection approved prior to insulation installation
☐ Insulation is installed at roof, walls, and floors at the thickness indicated per prescriptive or mandatory
requirements unless superseded by the approved plans
☐ Window Replacement ☐ Windows shall not reduce egress from existing conditions ☐ Windows fitted to existing opening only ☐ Windows full tempered where closer than 18” to floor and over 9 feet square ☐ Full tempered glass where within 24” arc of door and within 60” of floor ☐ Guard rail where windowsill is greater than 6 feet above grade and less than two feet above floor ☐ Wildland Urban Interface compliant, dual pane glazing with one pane tempered ☐ Windows comply with Title 24 requirements, CF2R completed and included as necessary
☐ Exterior Siding and Plastering ☐ Code-compliant approved paper and lathing ☐ Code-compliant backing for lath ☐ Double paper for existing sheer ☐ Code compliant flashing of windows and doors ☐ Installation of drip screed per code with compliant clearances from finished grade ☐ Installed corner rite or bead for all edges ☐ Listed caulking for all tears and penetrations ☐ Scratch coat, brown and color to achieve 7/8” approximate stucco or per listing of alternate product ☐ Installed paper backed ribbon lath for all soffit location
☐ Interior Drywall ☐ These permits shall only cover drywall replacement within an existing permitted structure. ☐ Installed correct size and type of drywall with approved fasteners per code
☐ Fastening pattern for multiple layers was verified and rated walls were appropriately fire caulked
☐ Completed all taping, mud, and painting
☐ Fence meets all applicable setbacks, including, but not limited to, the
☐ Installation meets applicable City of Carlsbad Municipal Code ☐ Installed on owner’s property meeting all applicable setbacks (within setback may not be self-certified) ☐ Maximum height matches the approved plans
☐ fence and pool / spa gate installed according to the swimming pool safety act ☐ Material matches the approved plans ☐ No electrical; no luminaries; no retaining walls over 4 ft. in height (otherwise, may not be self-certified)
☐ Commercial Sign ☐ The sign, it’s fasteners and electrical components are installed in compliance with local codes and
ordinances and in accordance with the approved plans
☐ UL listed equipment was used for the sign installation
☐ Wall penetrations were adequately sealed
☐ The grounding and bonding system was verified back to the main electric source
Building Permit Inspection History Finaled
PERMIT INSPECTION HISTORY for (CBR2025-0465)
BLDG-Residential 02/24/2025Application Date:Permit Type:Owner:
Reroof 02/26/2025Work Class:Issue Date:Subdivision:
09/23/2025Expiration Date:Status:
IVR Number: 61911
Closed - Finaled 2659 SUTTER ST
CARLSBAD, CA 92010-7905
Address:
Scheduled
Date
Inspection Type Inspection No.Inspection
Status
Primary Inspector Reinspection InspectionActual
Start Date
03/26/2025 03/26/2025 BLDG-15 Roof/ReRoof
(Patio)
279607-2025 Failed Brad Cornair Reinspection Incomplete
COMMENTS PassedChecklist Item
BLDG-Building Deficiency Tear off not substantially completed. Roof
partially covered without roof sheathing
approval. Rotted wood at starter boards
need replacing.
No
03/27/2025 03/27/2025 BLDG-15 Roof/ReRoof
(Patio)
279868-2025 Passed Brad Cornair Complete
COMMENTS PassedChecklist Item
BLDG-Building Deficiency Tear off not substantially completed. Roof
partially covered without roof sheathing
approval. Rotted wood at starter boards
need replacing.
3/27. Roof sheathing passed
Yes
04/04/2025 04/04/2025 BLDG-Final Inspection 280707-2025 Passed Tim Kersch Complete
COMMENTS PassedChecklist Item
BLDG-Building Deficiency Yes
BLDG-Plumbing Final Yes
BLDG-Mechanical Final Yes
BLDG-Structural Final Yes
BLDG-Electrical Final Yes
Thursday, April 17, 2025 Page 1 of 1