The URL can be used to link to this page

Home My WebLink About2525 EL CAMINO REAL; ; AS100058; Permit11/21/24, 2:16 PM AS 100058 Permit Data City of Carlsbad Sprinkler Permit 2525 EL CAM INO Job Address: REAL Permit Type: SPRINK Parcel No: 1563020900 Lot #: 0 Permit No: AS100058 Status: ISSUED Applied 5/12/2010 Approved: 5/12/2010 Reference No.: Issued: 5/12/2010 PC #: Inspector: Project Title: BEST BUY MOBILE T.I. FIRE SPRINKLER PLAN CHECK & INSPECTIONS Applicant: BRADSHAW ENGINEERING CORP 8645 ARGENT ST SANTEE CA 619-448-4300 Owner: PLAZA CAM INO REAL C/O WESTFIELD PROPERTY TAX DEPT P0 BOX 130940, DEPT WFLD CARLSBAD, CA Fees ($) Add'I Fees ($) Total ($) Balance ($) 130 0 130 0 about:blank 1/1 A310ooco-s R I iab l The Concealer® A Concealed Sprinkler With %" (13mm) or 1%" (38mm) Adjustment Features Push-on/Thread-off cover plate assembly attachment with ½" (13mm) adjustment. Does not require clips or springs. 1112" (38mm) Total adjustment provided by adjustable inlet versions. Adjustable inlet version available with either 1" NPT ale or female threads eliminating costly reducing coupling. Smooth aesthetic ceiling profile. Available in white or other color painted or brass, chrome, or black plated finishes. Ordinary and intermediate temperature ratings. Multiple orifices for design flexibility. Approvals & Listings Underwriters Laboratories Inc. (UL) Underwriters Laboratories of Canada. (ULC) 3.N.Y.C. BS&A No. 587-75-SA. Note: Approvals are for light and ordinary hazard, except for small orifice sprinklers which are limited to light hazard occupancies. The cup and skirt are fabricated from plated steel and are intended for interior non corrosive applications. U.S. Patent No. 4,880,063. Application The Reliable Model G4 -. concealer® is the most versatile . concealed sprinkler available. It provides the best form of fire pro- tection while offering an attractive appearance and ½" (13mm) of -; cover adjustment for ease of instal- lation The adjustable 1 NFl inlet versions have 1)/2" (38mm) of total adjustment and also eliminates the need for a reducing cou- pling. The small diameter Push-on/Thread-off cover plate assembly is easily attached and blends into the ceiling, con- cealing the most dependable fire protection available, an automatic sprinkler system. Bulletin 121 Rev.l oJ Model G4 Concealed Automatic Sprinkler CD The Concealer® is designed for use where aesthetic ap- pearance is important. Offices, hospitals, motels and res- taurants are but a few of the applications where it can be used. It is available in different orifice sizes allowing the de- signer to optimize system performance, thereby achieving a most efficient installation. The Concealer® can eliminate the need for precise cutting of drop nipples. The Push-on/Thread-off cover plate assem- bly can be adjusted without tools so it mates accurately with the ceiling. The fire protection system need not be shut down to adjust or remove the cover plate assembly. Product Description The Reliable Model G4 Concealer® uses the proven Model C fusible element in a standard style sprinkler frame with a drop-down deflector. This assembly is recessed into the ceiling and concealed by a flat cover plate. The Push-on/Thread-off cover plate and sprinkler cup assem- blies are held tight by a flexible tooth engagement to the threaded cup. This threaded engagement provides ½" (13mm) of cover adjustment. The flat cover plate is attached to the skirt using an ordinary temperature classification sol- der. This results in a strong cover plate assembly with an or- dinary temperature rating, and an intermediate temperature sprinkler which can be installed in 150°F (66°C) environ- ments. When the ceiling temperature rises, the solder hold- ing the cover plate to the skirt melts, the flat cover plate released thus exposing the sprinkler inside to the rising am- bient temperature. The subsequent fusing of the sprinkler element opens the waterway and causes the deflector to drop into position to distribute the discharging water. Any secure engagement of the threads between the cover plate and cup will assure that the drop-down deflector is properly located below the ceil- ing when a sprinkler operates. The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523 Installation Do not install The Concealers in ceilings which have positive pressure in the space in the space above. After a 2 inch diameter hole is cut in the ceiling, the sprinkler is to be installed with the Model G4 Wrench. The wrench has drive tangs which insert into cup slots. When installing a sprin- kler the wrench is first positioned into the sprinkler/cup assembly until the wrench tangs engage drive slots in the top of the cup (there are two sets of mating drive slots in the cup). The sprinkler is then tightened into the pipe fitting. When inserting or removing the wrench from the sprinkler/cup assembly care should be taken to prevent damage to the sprinkler. DO NOT WRENCH ON ANY OTHER PART OFTHE SPRINKLER/CUP ASSEMBLY. The adjustable inlet versions are similar to the standard Model 04 except that an addition 1" (25mm) of adjustment is provided by means of a telescoping inlet section that threads in or out of a stationary coupling reducer (either 1 male or 1 female) as shown in Fig. 2 or Fig. 3. These sprinklers must be installed before the ceiling is in place, by wrenching on only the coupling reducer Temperature Ratings Classification Sprinkler Cover Plate Max. Ambient Temp. Ordinary 135°F/57°C 135°F157°C 100°F/38°C Ordinary 1 65°F174°C 135°F157°C 100°F/38°C Ordinary 165°F/740c 165°F/74°C 100°F/38°C Intermediate 212°F/100°C 65"F/74°c i 50'F/66"c Installation Data hex flats. After the ceiling has been installed with holes for the sprinkler, each telescoping inlet section is to be adjusted with the G4 Wrench. Install the push-onAhread-off cover plate assembly over the sprinkler by holding and pressing it straight up into the cup. Final adjustment of each cover assembly is made by hand turning it clockwise until it is tight against the ceiling. Maintenance The Model 04 Concealere should be inspected quarterly and the sprinkler system maintained in accordance with NFPA 25. Do not clean sprinklers with soap and water, ammonia or any other cleaning fluids. Remove any sprinkler that has been painted (other than factory applied) or damaged in any way. A stock of spare sprinklers should be maintained to allow quick re- placement of damaged or operated sprinklers. Prior to installa- tion, sprinklers should be maintained in the original cartons and packaging to minimize the potential for damage to sprinklers that would cause improper operation or non-operation. Ordering Information Cover Plate Finishes (1) Sprinkler Model Temperature Rating Nominal Orifice Flat Cover Plate Finish Inlet Type Note: Unless otherwise specified, the 165°F (74°C) sprinkler will be provided with the 165°F (74°C) cover. Standard Finishes Bronze Chrome Plated White Special Application Finishes Black Plated Bright Brass Off White Black Paint Inlet Adjustment Orifice US Metric Nominal Sprinkler Sprinkler Total Nominal Identification Thread Approvals Number JSIN't Non-Adjustable )ç'(l3mrn) "(15rrm) 5.6 80 )ç' NPT (R1/2) 1,2,3 R2115 Non-Adjustable )ç'(13mm) (11 mm) 4.2 60 ,J" NPT (R/2) 1.2,3 R2113 Non-Pdjuslable )"(13mm) %"(lOTTn) 8 40 ," NPT (RY2) 1,2,3 R2111 Adjustable 1)"(38rnm) )"(1&rrn) 5.6 80 1"NPT MalecxFemale 1,2,3 R2118 Adjustable 1)"(38mrn) 6"(11rYTh) 4.2 60 1"NPT Male orFemale 1,2,3 R2113 Adjustable 1,1"(38mm) %"(10Th) 2.8 40 1" NPT MaieorFemale 1,2,3 R2112 " Other colors and finishes are available. Consult factory for details Note: Paint or any other coatings applied over the factory finish will void all approvals and warranties. Installation Wrench Model G4 Sprinkler Wrench • ,- ,iwov )Iti LJt,J Y2" Fig. 1 - (R) NPT Non- Adjustable Inlet Fig. 2 - 1" NPT Male-Adjustable Inlet Fig. 3 -111 NPT Female-Adjustable Inlet Thooquipment presented in this bulletin is to be installed in accordance withthe latest pertinent Standards of the National Fire Protection Association, Factory Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable. Products manufactured and distributed by Reliable have been protecting life and propertyfor over 80 years, and are installed and serviced by the most highly qualified and reputable sprinkler contractors located throughout the United States, Canada and foreign countries. Manufactured by Rel"lable"o The Reliable Automatic Sprinkler Co., Inc. (800)431.1588 Sales Office (800) 848-6051 Sales Fax (914) 829-2042 Corporate Offices www.reliablesprinkler.com Internet Address e Recycled Paper Revision lines indicate updated or new data. EG. Printed in U.S.A. 06/02 P/N 9999970)14 Pendent Bulletin 110 Rev.S Automatic Sprinklers Spray Upright, Spray Pendent And Conventional Product Description The Reliable Model G Automatic Sprinkler utilizes the center strut solder in compression principle of construction. The fusible alloy is captured in the cylinder of the solder capsule by a stainless steel ball. When the fusible alloy melts, the ball moves into the cylinder allowing the cylinder to fall away from the sprinkler. When this happens, the lever is released to spring free from the sprinkler so that all of the operating parts clear from the waterway allowing the deflector to distribute the discharging water. Except for the parts in the cylinder as mentioned above, the sprinkler components are made from copper based alloys for maximum corrosion protection. Lead plated, wax coated or wax over lead plated sprinklers are available for specially severe environments. Chrome plated sprinklers are available for decorative purposes. All sprinklers are individually hydrostatically tested. All sprinklers are identified as to their fusing point by markings that appear on several of the operating parts and by an identifying color that appears on the frame. Sprinkler Types Standard Upright - This deflector configuration is normally used with exposed piping installations. Water is distributed laterally and downward in a wide pattern approximating a hemisphere which is completely and uniformly filled with water in the form of small drops or spray. Standard Pendent - This deflector configuration is normally used where the space above the piping is limited or where a concealed piping installation is employed. The discharge characteristics of the standard pendent are virtually identical to the standard upright as described above. Large and Small Orifice—By varying the orifice size, a large or small orifice sprinkler is created that will distribute as much as 40% more water or 65% less water than the normal ½" (15mm) orifice sprinkler. Conventional—This deflector configuration is used primarily in those countries where the LPC installation rules have precedence. The sprinkler is designed to distribute a portion of its water discharge upward against the ceiling with the balance downward. It may be installed in either the upright or the pendent position. Sprinklers with conventional deflectors are available with orifice sizes corresponding to light, ordinary and extra—high hazard installations. Upright Small Orifice Upright Conventional Application and Installation Standard sprinklers are used in fixed fire protection systems: Wet, Dry, Deluge or Preaction. Care must be exercised that the orifice sizes, temperature ratings, deflector styles and sprinkler spacings are in accordance with the latest published standards of the National Fire Protection Association or the approving authority having jurisdiction. The sprinklers must be installed with the Reliable Model D Sprinkler Wrench. Any other type of wrench may damage the sprinkler. The approvals or listings of Reliable Automatic Sprinklers by major approving organizations are shown in the tabulated list provided on the back of this bulletin. 'Patent No. 4,440,234 The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523 Technical Data "K" Factor Sprinkler Identification Sprinkler Number (SIN) SSU SSP Sprinkler Type US Metric Height Approvals Standard-Upright (SSU) and Pendent (SSP) I Deflectors Marked to Indicate Position 562 81.0 2 %" (73 mm) 1, 2,3, 4, 5, 6, 7 R1025 R1015 /3" (15 mm) Standard Orifice with /3" NPT (R/3)Thread Y6 (11 mm) Small Orifice with /3° NPT (R/3)Thread 424 61.0 2%" (73 mm) 1,3,7 R1023 81013 (10 mm) Small Orifice with /2" NPT (8%) Thread 2.82 40.6 2/3" (73 mm) 1, 2,3, 7 R1021 81011 (8 mm) Small Orifice with%" NPT (R%)Thread 1.98 28.5 2.V8" (73 mm) 1,3,7 R1022 R1012 (20 mm)Large Orifice with NPT (R/) Thread 7.96 114.7 2%" (73 mm) 1,2,3,7 R1026 R1016 /32 (20 mm) Large Orifice with /3" NPT (R%)Thread 8.20 118.2 2 /3s" (75 mm) 1,2,3,7 R1027 R1017 20 mm XHH with 20 mm Thread 820 118.2 75.4 mm 4,5,6 R1027 R1017 lornmXLH with l0mmThread 4.10 59.1 73 mm 4,5,6 R1024 R1014 Conventional-Installed in Upright or Pendent Position 4.10 59.1 73 mm 5 R1074 l0mmXLHwith lOmmThread 15mm Standard Orifice with (R%) Thread 5.62 81.0 73 mm 4,5,6 R1075 20mmXHH with (R%) Thread - 75.4mm 4,7 - -------------------------- 5 ------- ...... .... -- ------ ------ rno Temperature Ratings Maximum Sprinkler Ambient - -ating Temperature Frame (1) Classification "F "C "F "C Color Ordinary 135 57 100 38 Black Ordinary 165 74 100 38 Uncolored Intermediate 212 100 150 66 White High J.... 286 141 ......5 107 ...................Blue Frame color does not apply to painted or plated sprinklers -Use sprinkler rating as identified on operating parts. Maintenance Model G Sprinklers should be inspected quarterly and the sprinkler system maintained in accordance with NFPA 25. Do not clean sprinklers with soap and water, ammonia or any other cleaning fluids. Remove any sprinkler that has been painted (other than factory applied) or damaged in any way. A stock of spare sprinklers should be maintained to allow quick replace- ment of damaged or operated sprinklers. Prior to installation, sprinklers should be maintained in the original cartons and packaging until used to minimize the potential for damage to sprinklers that would cause improper operation or non-operation. Use only the Model D Sprinkler Wrench for sprinkler removal and installation. Any other type of wrench may damage the sprinkler. Finishes Standard Finishes Bronze -All Temperature Ratings Chron)> -All Temperature Ratings White -All Temperature Ratings Only _Frame _and _Deflector _are _Painted Special Application Finishes Bright Brass Plated -Only frame, deflector and cap are plated. 135°F (570C), 165°F (74°C), 212°F (100°C) Temp. Rating. Black Plated -Only frame, deflector and cap are plated. All Temp. Ratings. Polyester Coated (2) -Only frame and deflector are coated. Lead Plated -165°F (74°C), 212°F (100°C) and 286°F (141°C) Temp. Ratings. Wax-Coated (3) -165°F (74°C) Clear Wax, 212°F (100°C) Brown Wax. Wax-Coated Over Lead Plated 13) 165°F (74°C) Clear Wax, 212°F(100°C) Brown Wax. (I) Other colors and finishes are available. Consult factory for details. UL listed and NYC MEA Approved only. 212°F (100°C) brown wax may be used on 286°F (141'C) sprinklers when maximum ambient temperatures do not exceed 150°F (660C). UL Listed, FM Approved, NYC MEA 258-93-E. Approval Organizations Underwriters Laboratories, Inc. Factory Mutual Research Corporation Underwriters' Laboratories of Canada Loss Prevention Council Pleniere Assemblee VdS SchadenverhUtung N.Y.C. BS&A No. 587-75-SA or N.Y.C. MEA 258-93-F Ordering Information Specify Model Deflector Upriciht Pendent Conventional Nominal Orifice Inlet Thread Temperature Rating Finish The equipment presented in this bulletin is to he installed in accordance with the latest pertinent Standards of the National Fire Protection Association, Factory Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable. Products manufactured and distributed by Reliable have been protecting life and property for over 80 years, and are installed and serviced by the most highly qualified and reputable sprinkler contractors located throughout the United States, Canada and foreign countries. Manufactured by The Reliable Automatic Sprinkler Co., Inc. (800) 431-1588 Sales Offices (800) 848-6051 Sales Fax (914) 829-2042 Corporate Offices ww.reisblesprinklr.com Internet Address Paper Revision lines indicate updated or new data. EG Printed irru.SA. 11104 P3)959?mx)5 Ward Manufacturing -Fittings Specifications Pagel of3 MALLEABLE IRON THREADED FITTINGS Standard Class 150 Specifications: ANSI B1.20.1, Threads, B 16.3, Dimensions, Pressure Rating ASTM A197, Material. A153, Galvanizing Federal Spec: WWP 521 J Pressure Ratings 150 psig - Saturated Stream 300 psig - At 150 Degrees W. 0. G. U.L.C. and U.L. listed where applicable EM approved Extra Heavy Class 300 Specifications: ANSI B1.20.1, Threads, B16.3, Dimensions, Pressure Rating ASTM A197, Material A153, Galvanizing Pressure Ratings: 300 psig - Saturated Stream 1"-2000 psig —At 150 Degrees W.O.G. 1 1 ¼" - 2" - 1500 psig - At 150 Degrees W.O.G. 21/2" - 3"— 1000 psig - At 150 Degrees W.0.G. j U.L.C. and U.L. listed where applicable, EM approved Union Specifications: (Brass to Brass, Brass to Iron, Iron to Iron, Gasket Type, Dielectric Iron to Brass) ANSI 131.20.1, Threads, B16.39, Dimensions, Pressure Rating ASTM A197, Material. A153, Galvanizing Federal Spec: WW-U-531 Pressure Ratings: Class 150: 150 psig - Saturated Stream 300 psig - At 150 Degrees W.O.G. Class 250: 250 psig - Saturated Stream 500 psig - At 150 Degrees W.O.G. Class 300: 300 psig - Saturated Stream 600 psig —At 150 Degrees W.O.G. U.L.C. and U.L. listed where applicable, FM approved Top Beam & C-Clamp Specifications: Malleable Iron ASTM A197, Material. A153, Galvanizing 318",112" rod size http://www.wardmfg.com/FittingsSpecs.asp 11/16/2005 Ward Manufacturing -Fittings Specifications Page 2 of 3 Supplied with set screw and lock nut Clamp Range: Small mouth Beam Clamp & C-Clamp - 3/4" Large mouth Beam Clamp & C-Clamp - 1 1/4' U.L.C. and U.L. listed where applicable, FM approved [II l{h i:i i J'i i] uI IIlI[e1 Standard Class 125 Specifications: ANSI B1.20.1, Threads, B 16.4, Dimensions, Pressure Rating ASTM A126, Material. A153, Galvanizing Federal Spec: WWP 521 Pressure Ratings: 125 psig - Saturated Stream 175 psig — At 150 Degrees W. 0. G. Federal Spec: WW-P-501 U.L.C. and U.L. Listed Where Applicable EM. Approved Where Applicable Plug and Bushing Specifications: ANSI B1.20.1, Threads, B16.14, Dimensions, Pressure Rating AS.MA197 (Malleable), A126 (Cast), Material A153, Galvanizing Pressure Ratings: Malleable: 150 psig - Saturated Stream 300 psig - At 150 Degrees W.O.G. Pressure Ratings: Cast: 125 psig - Saturated Stream 175 psig —At 150 Degrees W.O.G. Fe.d,era.S.pe.c: WW-P-471 U.L.C. and U.L. Listed Where Applicable FM Approved Where Applicable Drainage Fitting Specifications: AN.Si. B1.20.1, Threads, 1316.12, Dimensions ASTM A126, Material. A153, Galvanizing Federal Spec: WW-F-941 Cast Iron Flange Specifications: ANSI B1.20.1, Threads, B16.1, Dimensions, Pressure Rating ASTM A126, Material. A153, Galvanizing Pressure Ratings: 125 psig - Saturated Stream 175 psig —At 150 Degrees W.O.G. Feder a..S.pec: WW-F-406 U.L.C. and U.L. Listed Where Applicable FM Approved Where Applicable Cast Iron Flange Fitting Specifications: ANSI B16.1, Pressure Rating ASTM A126, Material http://www.wardmfg.com/FittingsSpecs.asp 11/16/2005 tVard Manufacturing -Fittings Specifications Page 3 of 3 Pressure Ratings: 125 psig - Saturated Stream 175 psig —At 150 Degrees W.O.G. Federal Spec: WW-F-406 U.L.C. and U.L. Listed Where Applicable FM Approved Where Applicable WARDLOX PLAIN-END FITTING SPECIFICATIONS I Housing: Cast Iron to ASTM A126 Class A Set Screws: Carbon Steel, Cadmium Plated, Self-Locking Gaskets: E.P.D.M. to ASTM D-2000 With Temperature Range of -30 to 230 °F Threaded Outlets: Conform to ANSI B-1.20.1 Specifications Pressure Ratings: 175 psig U.L. Listed, FM Approved TEE-LOX MECHANICAL BRANCH CONNECTOR SPECIFICATIONS Housing: Cast Iron to A126 Class A, Ductile to A536 Gasket: E.P.D.M. to ASTM D-2000 Hole Size: 13/16" U-Bolt: Plated High Tensile Steel Threaded Outlet: Conform to ANSI/ASME B-1.20.1 Specifications Run Sizes: i 1/4", 1 1/2", 2", 2 1/2" Outlet Sizes: 1/2", 3/4", 1" Pressure Ratings: 175 psig U.L. Listed, FM Approved http://www.wardmfg.com/FittingsSpecs.asp 11/16/2005