HomeMy WebLinkAbout5781 VAN ALLEN WAY; ; FPC2021-0191; Permit(it of
Callsbyad
Print Date: 11/18/2024 Permit No: FPC2021-0191
Job Address: 5781 VAN ALLEN WAY, CARLSBAD, CA 92008-7321 Status: Closed - Finaled
Permit Type: FIRE-Construction Commercial Work Class:
Parcel #: 2121304400 Track #:
Valuation: $1,248,793.50 Lot #:
Occupancy Group: Project #:
#of Dwelling Units: Plan #:
Bedrooms: Construction Type:
Bathrooms: Orig. Plan Check #:
Plan Check #:
Fixed Extinguishing Syste
Applied: 10/07/2021
Issued: 06/21/2023
Finaled Close Out: 11/18/2024
Final Inspection:
INSPECTOR: Salcedo, Felix
Project Title:
Description: THERMO FISHER GOLDRUSH - PREACTION CONTROL PANEL FOR SPRINKLER PREACTION SYSTEM
Applicant: FPContractor:
NOVA SECURITY NOVA SECURITY
CORY HILL 1950 CORDELL CT, # 107
1950 CORDELL CT, # STE 107 EL CAJON, CA 92020-0927
EL CAJON, CA 92020-0923 (619) 448-3007
(619) 448-3007
FEE AMOUNT
FIRE Pre-Action System with Alarm $607.00
Total Fees: $607.00 Total Payments To Date: $607.00 Balance Due: $0.00
Fire Department Page 1 of 1
1635 Faraday Avenue, Carlsbad CA 92008-7314 442-339-2665 1 Inspections: 442-339-2660 1 www.carlsbadca.gov
Gold Rush
5781 Van Allen Way
Carlsbad, CA 92008
Fire Alarm Submittal
10/6/2021
Submitted By:
KAI SECURITY
8779 Cottonwood Ave, Ste. 103
Santee, CA 92071
619 448-3007
Lic# CIO 802053
Cc'/ (-((LL: C1\
Gold Rush
5781 Van Allen Way
Carlsbad, CA 92008
Fire Alarm Submittal
Equipment List
Description Model Manufacture CSFM#
Fire Alarm Control Unit PFC-44 1ORC Potter 7165-0328:0170
Smoke Detector 2W-B/2WT-B System Sensor 7272-1653:0152
POTTER PFC-441ORC
The Symbol of Protection RELEASING CONTROL PANEL
Dimensions: 18 1/4" x 14 1/2" x 4 V
UL and ULC Listed, FM Approved, NYMEA Accepted, CSFM
Approved, CE Marked, and RoHS Compliant.
General Description
The Potter Model PFC-4410RC isaflexible multi-hazard releasing control
panel that is well suited for a number of applications. The PFC-4410RC
is listed for use with pre-action and deluge sprinkler suppression systems
and agent based fire suppression systems.
The panel utilizes a microprocessor-based system that has 24 Standard
Programs, which covers a majority of installations. The simple to follow
Menu Structure programs the entire system in a matter of minutes. In
addition to the Standard Program s, the panel allows custom programming
to accommodate any installation.
Multi-Hazard Operation
Four Class B Initiating Circuits
Two Class B Supervisory Circuits * *
Four Class B Output Circuits
Programmable Cross Zoning
Supervised Microprocessor
32 Character Alpha-Numeric LCD Display
Custom Banner Message and Zone Description text
Custom Zone Description Text
On Board Menu Driven Programming Controls
Releasing Circuits Protected From False Activation
* Continuous or Timed Discharge
40 Event History Buffer
Walktest with Automatic Time-out
Alarm, Trouble Supervisory, and Waterfiow relays
Optional Class A Initiating Zone and output module
34 character LED supplemental display
24 Standard Programs in Panel Memory
Password Protection for all Programming
24 Hour Clock
Suitable for agent or water-based extinguishing
Programmable pre-discharge timers*
One Class B Abort circuit* (Defaults to additional supervisory zone
in water based mode.)
Four Abort modest
* Available in Chemical mode only
** One zone programmable as abort in chemical mode.
The panel is Ninth Edition UL listed, IJLC listed, Factory Mutual,
California State Fire Marshal (CSFM), New York Materials Equipment
Acceptance (MEA) Approved, CE Marked, and RoHS Compliant.
The PFC-4410RC is housed in a durable steel cabinet with removable
door and key lock. The panel is available in either a red or white finish
and an optional flush mount trim ring is available. The cabinet contains
knockouts on the side, back and top of the cabinet to ease installation.
In addition, the cabinet will house up to 18 amp-hour batteries that will
provide in excess of 90 hours of standby power.
Ordering Information
Model Number Description Stock Number
PFC-4410RC 4 Zone Releasing Control (White Cabinet) 3006144
PFC-4410RC 4 Zone Releasing Control (Red Cabinet) 3006142
PFC-4410RC-PCA Replacement Motherboard 3006230
PFC-TW Bezel for Semi-Flush Mounting (White) 5090157
PFC-TR Bezel for Semi-Flush Mounting (Red) 5090155
BT-80 Battery, 12V 8AH for 24 hour standby (2 Req'd) 5130084
BT-120 Battery, 12V 12AH for 24 hour standby (2 Req'd) 5130090
BT-180 Battery, 12V, 18AH for 90 hour standby (2 Req'd) 5130086
CA2Z 2 Zone Class A Initiating Circuit Module 3006013
CAM Class A Indicating Circuit Module 3005300
ARM-44 Relay Module for PFC-4410RC 3006221
ARM-2 Auxiliary Relay Module 3004725
RA-4410RC Remote Annunciator 3006400
BB-RA-44R Surface Mount Back Box for RA-4410RC (Red) 3006401
Potter Electric Signal Co., LLC • St. Louis, MO - Cast Service; 866-240-1870 • Tech Support:866-956-1211• Canada 888-882-1833 www.pottersignal.com
PRINTED IN USA MFG #5401250 - REV C PAGE 1 OF 2
3/14
(DPOTTER
The Symbol of Protection
Architects/Engineers Specifications
The control panel for the extinguishing agent releasing system shall
be a microprocessor based control capable of protecting multiple
hazards in one control panel. It shall be Underwriters Laboratories
Inc. listed under Standard 864 Ninth Edition and Underwriters
Laboratories of Canada for Local Control Units for Releasing Service.
The control shall also be approved by Factory Mutual Research
Corporation and be compliant with the requirements of NFPA-72
(Local: A, M, SS service types; DAC and NC signaling type) and
NFPA12, NFPAI2A, NFPA-13, NFPA-15, NFPA-16, NFPA-17,
NFPA-17A, NFPA-750, and NFPA-2001.
The control shall be housed in an 18 gauge steel cabinet that has a
hinged, removable door with a key lock. The finish shall be baked
enamel and available in red or off-white with contrasting trim and
logo. An optional matching bezel should be available for semi-flush
mounting. The cabinet shall have adequate space to house 18 AH
standby batteries capable of operating the system for at least 90 hours.
The control shall include a fully supervised integral power
supply/battery charger capable of providing 200mA to the auxiliary
power circuit. It shall also be capable of providing 2.5 Amps to all
releasing and notification appliance circuits combined. All initiating,
output and auxiliary power circuits shall be power limited.
The control shall have a 32 character (16 characters, 2 lines) backlit
LCD display and a 34 LED supplemental display. All diagnostic and
alarm event information shall be viewable in text form on this display.
A field programmable custom banner message with the current date
and time shall be displayed when no current alarm or diagnostic
information exists.
All operational features of the control panel shall be field
programmable using menu driven selections on the alpha-numeric
display and on board controls. No special programmer will be
required and jumpers or switches to configure operational features
shall not be permitted. Alarm and trouble indications shall resound
when required.
The control panel shall be equipped with 24 programs built into the
panel memory, 15 for water based extinguishing and 9 for agent
extinguishing. In addition, the panel shall have the ability to add custom
programs. All programming functions shall be password protected.
The control shall have four fully supervised Class B (Style B)
initiating circuits capable of supporting the operation of 25 compatible
2-wire smoke detectors on each circuit.
The individual circuits shall be selectable through the programming
sequence to operate in one of the following modes: Conventional,
PFC-44 1ORC
RELEASING CONTROL PANEL
Waterfiow, Linear Heat Detection (up to 700 ohms per zone), Manual
Release, Low Air Alarm, Supervisory, Tamper, Low Air or High Air.
Optional Class A modules, CA2Z, may be added for Class A
operation.
The panel shall have a Low Air Zone that creates a supervisory
condition and can be mapped to a release output.
The control shall have two fully supervised Class B (Style B)
supervisory circuits. These circuits shall be selectable through the
programming sequence to operate in one of the following modes:
Supervisory, Tamper, Low Air or High Air.
The control shall have one fully supervised class B (style B) Abort
circuit with 4 different operating modes, ULI, IRI, and NYC, and 30
second.
The control shall have four fully supervised Class B (Style Y) output
circuits. These circuits shall be selectable through the programming
sequence to operate as one of the following: Alarm Notification
Appliance, Supervisory Notification Appliance, Trouble Notification
Appliance or Releasing. The optional CAM module may be added to
convert the outputs to Class A.
The panel shall have an RS-485 output and auxiliary power outputs
for connection and supervision of up to 4 remote annunciators or an
ARM-44 Relay Module and 3 annunciators.
The releasing circuits shall be supervised for short circuit conditions
and shall be programmable for cross zoning operation when required.
The discharge timer for these releasing circuits shall be programmable
for times of 7, 8, 9, 10, 20 minutes or continuous. All initiating and
output circuits shall be capable of being individually disabled or
enabled. In addition, when in the agent extinguishing mode there shall
be a pre-discharge timer adjustable from 0-60 seconds from an alarm
zone or 0-30 seconds from a manual release zone.
The control shall have a test mode that will automatically disable
all releasing circuits. The test mode shall operate in such a manner
as to automatically reset the initiating circuit and indicating circuits
after detecting each alarm condition initiated by the test. All testing
shall be recorded in the 40 event history buffer. The test mode will
automatically terminate after twenty minutes of inactivity.
The control shall have four integral relay contacts rated 3 Amps at 30
VDC for connection to external auxiliary equipment. One relay shall
operate when an alarm condition occurs, another when a trouble signal
occurs, the third when a supervisory condition occurs, and the fourth
during a waterfiow condition.
UL and ULC Listed, FM Approved, NYMEAAccepted, CSFM Approved,
CE Marked and RoHS Compliant
PRINTED IN USA MFG #5401250 - REV C PAGE 2 OF 2
3/14
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL -
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
-
LISTING SERVICE
LISTING No. 7165-0328:0170. Page 1 of 1
CATEGORY: :7165 - FIRE ALARM CONTROL UNIT (COMMERCIAL)
LISTEE: Potter Electric Signal Co1609 Park 370 Place, Hazelwood, MO 63042 United States
Contact: Brad Serangeli (314) 595-6900 Fax (314) 595-6999
Email: bradspottersignal.com
DESIGN: Model PFC-4410RC and PFC-4410ARCfire alarm control units Automatic, manual,
noncoded, local, remote station, central station, releasing device, waterfiow and sprinkler
supervisory service. Refer to listee's data sheet for additional detailed product description
and operational considerations. Minimum system components:
(PFc-4410RC" Control Unit
PFC-44I0ARC Control Unit with LED annunciator
Suitable for use with the following modules: RA-4410RC, CA2Z, CAM, ARM-I, ARM-2,
*ARM44 and SG-32.
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listee's name, model number, electrical rating and UL label.
APPROVAL: Listed as fire alarm control units when use with separately listed electrically and functionally
compatible initiating and indicating devices. Suitable for high-rise applications when used
with separately listed voice evacuation systems. Refer to listee's Installation Instruction
Manual for details.
These control units do not generate a Temporal Pattern Signal. If the distinctive three-pulse
Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition
is required, the control unit must be used with appliances that can generate the temporal
pattern signal.
Model PFC-4410RC control unit meets the requirements of UL Standard 864, 9th edition.
Model PFC-44I0ARC control unit meets the requirements of UL Standard 864, 8th edition.
NOTE: Combined with 7170-0328:171
*Rev 06-18-10 fm
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2021 'Listing Expires June 30, 2022',
Authorized By: DAVID CASTILL.O,, M.E., F.P.E.
Fire Engineering Division
PFC-4410RC • 5403550 • REV Q' 11/12
2-Wire Smoke Detector Compatibility Data
Smoke Detector Compatibility Identifier "A"
Det. Model Identifier Base Model Identifier
1400* A N/A N/A
2400 A N/A N/A
2400TH* A N/A N/A
2W-B A N/A N/A
12WT-0 A N/A N/A
2WTR-B A N/A N/A Detection Systems (Max. No. Of Detectors Per Zone Is 25)
Det. Model Identifier Base Model Identifier
DS250 A MB2W/MB2WL A
DS250TH A MB2W/MB2WL A
DS250HD A MB2W/MB2WL A
Esi (Max. No. Of Detectors Per Zone Is 25)
Det. Model Identifier Base Model Identifier
611U S1O 6011J SOO
61IUD S10 601U SOO
611UT 510 601U SOO
612U S10 601U SOO
612UD slo 601U SOO
613U5 SIO 601U SOO
6IIUD slo 609U10 SOO
612UD Slo 609U10 SOO
425C Sb N/A N/A
425CT Sb N/A N/A
Hochiki (Max. No. Of Detectors Per Zone Is 25)
Det. Model Identifier Base Model Identifier
SLR24* HD-3 HSC-221R HB-71
HSB-221 HB-54
HSB-221N HB-54
NS6-221
NS4-221
NS6-220 HB-3 SLR24H* HD-3 HSC-221R BB-71
HSB-221 BB-54
HSB-221N HB-54
NS6-221
NS4-221
SIJ24* HD-3 HSC-221R HB-71
HSB-221 BB-54
HSB-221N HB-54
NS6-221
NS4-221
Fenwal (Max. No. Of Detectors Per Zone Is 25)
Det. Model Identifier Base Model Identifier CPD.7051* I51EE1 2-WIRE FE51A PSD7155* P55FE1 2WRLT FE52A PSD7156* P56FE1 2WRB FE55A
All of the above Fenwal detectors and bases can be used in any combination
Retrofit Base Adaptor 70-501000-003, Identifier MAFE1 (for series 70-201000 Bases, Models -001, -002, -003 and -005)
Duct Housing with Detector Base DH-51, Identifier DH22FE5 (for CPD-7051 and PSD-7155 detectors only)
Potter (Max. No. Of Detectors Per Zone Is 251
Det. Model Identifier Base Model Identifier PS24* HD-3(HOCHIKI) SB-46 HB-71(HOCHIKI)
HB-54(HOCHTKI)
SB-93 HB-3 (HOCHIIKI
PS-24H HD-3(HOCHLKI) SB-46 HB-71(HOCHIIU)
MB-54(HOCHlKI) IS24* HD-3(HOCIIIKI) SB-46 HB-71(HOCHTKJ)
HB-54(HOCHIKI)
S Only one detector can be supported in alarm per zone.
If using a mix of System Sensor and other smoke detectors, a maximum of 20 detectors shall be permitted.
Sync Module Compatibility - Panel is compatible with the following synchronization modules:
Amseco #SMDb0-3A, Gentex #AVSM, System Sensor #MDL, Wheelock #DSM12/24 *UL and ULC Listed
89
Photoelectric
Smoke Detectors
System Sensor j3" series smoke detectors represent
significant advancement in conventional detection.
The j3 family is founded on three principles: installation
ease, intelligence, and instant inspection.
Features
Plug-in detector line, mounting base included
Large wire entry port
In-line terminals with SEMS screws
Mounts to octagonal and single-gang back boxes, 4-square back
boxes, or direct to ceiling
Stop-Drop 'N Lock attachment to base
Removable detector cover and chamber
Built-in remote maintenance signaling
Drift compensation and smoothing algorithms
Simplified sensitivity measurement
Wide-angle, dual-color LED indication
Loop testing via EZ Walk feature
Built-in test switch
Agency Listings
®
LISTED
' MEA MSFM
APPRMD approved approved 41US
5911 3011446 7272-1653:152 290-01-8 2093 3180932
Installation ease. The i3 line redefines installation ease with its
plug-in design. This allows an installer to pre-wire bases (included
with heads). The large wire entry port and in-line terminals provide
ample room for neatly routing the wiring inside the base. The base
accommodates a variety of back box mounting methods as well as
direct mounting with drywall anchors. To complete the installation, i
heads plug into the base with a simple Stop-Drop 'N Lock' action.
Intelligence. i3 detectors offer a number of intelligent features
to simplify testing and maintenance. Drift compensation and
smoothing algorithms are standard with the P line to minimize
nuisance alarms. 2-wire P detectors can generate a remote LED-
indicated maintenance signal when connected to the 2W-MOD2
loop test/maintenance module or a panel equipped with the i
protocol. The SENS-RDR, a wireless device, displays the sensitivityof P
detectors in terms of percent-per-foot obscuration.
Instant Inspection. The P series provides wide-angle red and
green LED indicators for instant inspection of the detector's
condition: normal standby, out-of-sensitivity, alarm, or freeze trouble.
When connected to the 2W-MOD2 loop test/maintenance module
or a panel with the P protocol, the EZ Walk loop test feature is
available on 2-wire 13 detectors. This feature verifies the initiating loop
wiring by providing LED status indication at each detector.
(j. Smoke Detector
Smoke detector shall be a System Sensor j3 Series model number listed to Underwriters Laboratories UL 268 for Fire Protection Signaling Systems. The
detector shall be a photoelectric type (Model 2W-B, 4W-B) or a combination photoelectric/thermal (Model 2WT-B, 4WT-B) with thermal sensor rated at 135°F
(57,2°C).The detector shall include a mounting base for mounting to 31/2-inch and 4-inch octagonal, single-gang, and 4-inch square back boxes with a plaster
ring, or direct mount to the ceiling using drywall anchors. Wiring connections shall be made by means of SEMS screws.The detector shall allow pie-wiring of the
base and the head shall be a plug-in type. The detector shall have a nominal sensitivity of 2.5 percent-per-foot nominal as measured in the UL smoke box. The
detector shall be capable of automatically adjusting its sensitivity by means of drift compensation and smoothing algorithms. The detector shall provide dual-
color LED indication that blinks to indicate power up, normal standby, out of sensitivity, alarm, and freeze trouble (Model 2WT-B, 4WT-B) conditions. When used
in conjunction with the 2W-MOD2 module, 2-wire models shall include a maintenance signal to indicate the need for maintenance at the alarm control panel
and shall provide a loop testing capability to verify the circuit without testing each detector individually.
Operating Voltage
1
Nominal: 12/24 V non-polarized
Minimum: 8.5V
Maximum: 35V
Maximum Ripple Voltage 30% peak to peak of applied voltage
Standby Current 2-wire: 50 pA maximum average; 4-wire: 50 pA maximum average
Maximum Alarm Current 2-wire: 130 mA limited by control panel; 4-wire: 20 mA @12 V.23 mA @24 V
Peak Standby Current 2-wire: 100 pA; 4-wire: n/a
Alarm Contact Ratings
Dimensions (Including base)
2-wire: n/a; 4-wire: 0.5 A @ 30V AC/DC
5.3 inches (127 mm) diameter; 2.0 inches (51 mm) height
Weight 63 oz (178 g)
Operating Temperature Range 2W-B and 4W-B: 32°F to 120°F (0°C to 49°C); 2WT-B and 4WT-B: 32°F to 100°F (0°C to 37.8°C)
Operating Humidity Range 0 to 95% RH non-condensing
Thermal Sensor 135°F (57.2C) fixed
Freeze Trouble 2WT-B and 4WT-B only: 41°F (5°C)
Sensitivity 2.50/o/ft nominal
Input Terminals 14 to 22 AWG
Mounting 31/2-inch octagonal back box
4-inch octagonal back box
Single-gang back box
4-inch square back box with a plaster ring
Direct mount to ceiling
LED Mode Green LED Red LED Condition Duration
Power up Blink every 10 seconds Blink every 10 seconds Initial LED status indication 80 seconds
Normal (standby) Blink every 5 seconds off
Out of sensitivity off Blink every 5 seconds
Freeze trouble off Blink every 10 seconds
Alarm off Solid
Ordering Information
2W-B No 2-wire .130 mA max. limited by control panel
2WT-B Yes 2-wire 130 mA max. limited by control panel
4W-B No 4-wire 20 mA @ 12 V, 23 mA @ 24 V
4W1-B Yes 4-wire 20 mA @ 12 V, 23 mA @ 24 V
Accessories
2W-MOD2 2-wire loop test/ maintenance module RT Removal / replacement tool
SENS-RDR Sensitivity reader A77-AB2 Retrofit adapter bracket, 6,6 inch (16.76 cm) diameter
f - 2W9 Systenn Sensor. SYSTOW 3825 Ohio Avenue. St. Charles, IL 60174 Product specifications subject to change wishoutno5ce.visit systemsnnsor.comw
Phone: 800-SENSOR2 . Fax: 630-377-6495 cueentpecdorInkoduding the Iatester0cnofthn data sheet Z45 SENSOR' A0-0318.007 .6/09. #2169
11 ~Rlkk. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
U
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE Aft
LISTING No. 7272-1653:0152 Page 1 of I
CATEGORY: 7272 - SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC
LISTEE: System Sensor, Unincorporated Div of Honeywell Int'l lnc.3825 Ohio Ave, St. Charles, IL
60174
Contact: Lisa Brant (203) 484-6105 Fax (203) 484-7309
Email: Iisa.brant@honeywelI.com
DESIGN: Models 2W-B, 2WT-B, 4W-B, and 4Wr-6 photoelectric type smoke detectors. Models 2W-B
and 2WT-B are 2-wire and models 4W-B and 4W1-B are 4-wire detectors. Models 2WT-B
and 4WT-B employ a thermistor type heat sensor (135°F). The heat sensor is supplemental
to the detector and is not intended for use as a required heat detector. Refer to listee's
printed data sheet for additional detailed product description and operational considerations.
*The above models comply with UL 268, Seventh Edition.
RATING: 8.5-35 VDC
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances,
and in a manner acceptable to the authority having jurisdiction. For vertical wall or ceiling
mount.
MARKING: Listee's name, model number, electrical rating and UL label.
APPROVAL: Listed as photoelectric smoke detectors for use with separately listed compatible fire alarm
control units. Suitable for installation in open areas with air velocity range from 0-1000 ft/mm.
NOTE: Formerly 7272-1209:210
*Revision 09-21-20 VWN
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2021 Listing Expires June 30, 2022
Authorized By: DAVID CASTILLO,, M.E., F.P.E.
Fire Engineering Division
30.63
VICTAULIC IS AN ISO 9151 CERTIFIED COMPANY
Series 753.E FireLock® 300 psi Solenoid
PRODUCT DESCRIPTION
The Series 753-E FireLock solenoid is designed for use with Victaulic FireLock Preaction and Deluge
devices that use electric actuation. Approved for a NEMA 4 classification the Series 753-E is rated to
300 psi/2065 kPa and is UL/ULC Listed and FM Approved for indoor or outdoor use. The solid brass
construction provides protection against falling dirt, inclement weather, windblown dust, splashing and
hose-directed water. The solenoid uses a 1/2 /21,3 mm NPT connection and is wired for 24 VDC service.
See Victaulic
Publication 10.01
for details.
DIMENSIONS
Dimensions Aprx. Size Weight Each Inches/mm A B C D LbsJkg
1/2 3.75 2.75 1.50 2.96 1.2
21.3 95 70 38 75 0.5
MATERIAL SPECIFICATIONS
Body: Forged Brass
Spring: 300 Series Stainless Steel
Seal: Fluoroelastomer
Diaphram: Fluoroelastomer
Wiring: 24 VDC
Voltage: 24 VDC
Power Rating: 8.7 Watts
Resistance: 66 Ohms
Current: .364 Amps
This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions.
Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.
S REGISTERED TRADEMARK OFVICTAIJLIC - S COPYRIGHT2005VICTAULIC - PRINTED INU.S.A.-SKU#WCAS-6H9N79 3I64 REV C
United States • Phone: 1-800-PICK-VlC (1-800-742-5842) • Fax: 610-250-8817 • e-mail: pickvic@victaulic.com
Canada • Phone: 905-884-7444 • Fax: 905-884-9774 • e-mail: viccanada@victaulic.com
Europe . Phone: 32-9-381-1500 • Fat: 32-9-380-4438 • e-mail: viceuro@victaulic.be
c UK • Phone: 44(0)1438741100 • Fax: 44(0)1438313883 • e-mail: viceuro@victaulic.be S Central and South America • Phone: 610-559-3300 • Fax: 610-559-3608 • e-mail: vical@victaulic.com tauIi
Australasia • Phone: 86-21-54253300 Ext 202 • Fax: 86-21-54253671 • e-mail: vicap@victaulic.com
j#
(E)POTTER PFC-441ORC
The Symbol of Protection COMPATIBLE RELEASING DEVICE LIST
Releasing Panel for
Water and Agent
Extinguishing Systems
(All specifications subject to revision.)
Automatic Water Control Valves _Compatibility _Data
Using the Following Solenoids Devices Per Circuit Water Valve Manufacturers Water Valve Designation Size NPT
ASCO Solenoid Valve 1 Figgie Fire Protection Model D and F 21/2 ', 4", 6"
Model 18210A107 Systems (Formally ASCOA)
Model R8210A107
Model 8210A107
24VDC
Parker/Skinner Grinnell Corp. Grinnell or Gem Model A-4 4", 6"
Solenoid Valve Model Grinnell or Gem Model B 2"
732l8BN4UNLVN0C1l12 Grinnell or Gem Model F445 2W'
24VDC Grinnell or Gem Model F470 4", 6"
Parker/Skinner Solenoid Valve 1 Central Sprinkler Model A 6"
Model Reliable Automatic Sprinkler Model A 2W' 73218BN4UNLVN0C1112 Co. Inc. Models B, BX and DDX 4", 6" 24VDC 100mm, 150mm
Global Fire Sprinkler Corp. Model F 2Y2",4", 6"
Star Sprinkler Corp. Model A 3", 6"
Model G 3", 6"
ASCO Solenoid Valve 1 The Viking Corp. Model E-1 PA", 2", 3", 4", 6"
Model T8210A107
Model R8210A107
Model 8210A107
24VDC
Sirai Solenoid Valve 1 Minimax FSX-A DN50, DN80,
L182/ZB12A DN100, DNI50,
____________ _________________
DN200
PRINTED IN USA MFG. #5403615. REV H PAGE 1 OF 2
01/19
(E)POTTER PFC-44 1ORC
The Symbol of Protection COMPATIBLE RELEASING DEVICE LIST
Solenoid Compatibility Data
Manufacturer Devices Per Circuit Solenoid(s) Voltage
Victaulic I 753-E Series, 767 Series 24VDC
Viking 1 11591, 11601, 11602,13843 or 13844 24VDC
Parker 1 73212BN4TNLVN0C322C2, 732I8BN4UNLVNOH111C2, or
7321GBN99NLVN0C322C2 24VDC
TLX 1 PA0036 24 VDC
Burkert 1 5282 24 VDC
SIRAI 1 ZB12A 24VDC
FM Approval
Solenoid Groups A, B, D, E, F, G, I, J, K., L
Cease Fire Canister Automatic Release. Maximum 8 Per Release Circuit.
Agent Releasing Systems Compatibility Data
Manufacturer Actuator Voltage
Fike Protection Systems Division of Fike, Inc. C85-102 CO2 Solenoid 24 VDC
Fike Protection Systems Division of Fike, Inc. Interface Firing Module P/N 102136* 24 VDC
Fike Protection Systems Division of Fike, Inc. Direct Fired Impulse Actuator (DFIA) 2-13279 24 VDC
Janus FM200 Electric Valve Actuator P/N 18481 24 VDC
Amerex 17014 24VDC
Fireaway Stat-X Models 30E, 60E, 100E, 250E, 500E, I000E, 1500E, and 2500E
Aero-k Models G30, G60, GIOO, G250, 0500, GI000, G1500, and G2500.
Maximum 10 per release circuit, two release circuits max per panel.
24 VDC
Minimax MX1230 and MX200 with Minimax actuator 887667 and 889323 24 VDC
Viking VSN1230 and VSN200 with actuator 16360 24 VDC
Fike UVO Model 02-13571 24 VDC
TLX PAO 128-7, PA0337 24 VDC
Masteco MSC-01 24 VDC
FirePro Model FP followed by a - number and letter suffix
Maximum 10 per release circuit, two release circuits max per panel 24
Hochiki Model FNX followed by a - number and letter suffix
Maximum 10 per release circuit, two release circuits max per panel 24 v DC
Alarm Indicating Appliance Compatibility Data
All alarm indicating appliances must be UL Listed, 24 VDC devices
***REFER TO 5403550 PFC-4410RC MANUAL FOR MORE INFORMATION"*
PRINTED IN USA MFG. #5403615 - REV H PAGE 2 OF 2
01/19