Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
6260 EL CAMINO REAL; ; FA080028; Permit
12/27/24,12:41 PM FA080028 Permit Data City of Carlsbad Fire Alarm Permit Permit No: FA080028 6260 EL CAM INO Job Address: REAL Permit Type: FALARM Parcel No: 2131100100 Lot #: 0 Reference No.: Status: ISSUED Applied 5/5/2008 Approved: 5/5/2008 Issued: 5/5/2008 PC #: Inspector: Project Title: TRICITY WELLNESS CENTER 2 MONITORING SYSTEM INSPECTIONS Applicant: Owner: ECR CORPORATE CENTER LP C/O MONICA R BROWNING 5600 AVENIDA ENCINAS #100 CARLSBAD CA Fees ($) Add'I Fees ($) I Total ($) Balance ($) 125 0 125 0 about:blank 1/1 THERE ARE NO PLANS ASSOCIATED WITH THIS PERMIT City of Carlsbad 05-06-2008 Fire Department Permit Permit No: FA080028 Job Address: 6260 EL CAM INO REAL CBAD Permit Type: FALARM Subtype: FALARM Status: ISSUED Parcel No: 2131100100 Lot #: 0 Applied: 05/05/2008 Issued: 05/05/2008 Fire Dept Ref#: FA080028 Building Permit#: CB072489 ' Entered By: BSW Location: Project Title: TRI-CITY WELLNESS CENTER Description: 2 MONITORING SYSTEM INSPECTIONS Contractor: Applicant/Contact: SIMPLEX GRINNELL 3568 RUFFIN ROAD SAN DIEGO CA 92123 Phone: 858-633-9100 Phone: Fax: Fax: Total Fees: $125.00 Total Payments To Date: $125.00 # of Devices 0 $0.00 Plan Check Fee $0.00 Additional Plan Check Fee $0.00 Nuisance Alarm $0.00 Permit Fee $0.00 Additional Permit Fee $0.00 Re-Inspection Fee 0 $0.00 Other $125.00 Additional Fees $0.00 TOTAL PERMIT FEES $125.00 NOTICE: Please take NOTICE that approval of your project includes the "Imposition of fees, dedications, reservations, or other exactions hereafter collectively referred to as "fees/exactions." You have 90 days from the date this permit was issued to protest imposition of these fees/exactions. If you protest them, you must follow the protest procedures set forth in Government Code Section 66020(a), and file the protest and any other required information with the City Manager for processing in accordance with Carlsbad Municipal Code Section 3.32.030. Failure to timely follow that procedure will bar any subsequent legal action to attack, review, set aside, void, or annul their imposition. ffA O O'S SimplexGrinnell LP 3568 Ruffin Road, South fi San Diego, CA 92123-2597 tL,CD / Fire & / SimplexGrinne Tele: (858) 633-9100 / Security Fax: (858) 633-9101 www.simplexgrinnell.com Tr-City Wellness Complex - ECR Corporate Center Responses to Reviewer's Comments Comment No. Response The operations matrix has been corrected, the marks in 0, P, and Q have been deleted. 2 The building permit was issued prior to 1/1/08. NFPA 72 2002 edition was in effect at that time. General notes 12, 13, 17 have been corrected to CEC instead of NEC. Section 725 was mentioned in general note 17. 3 The system is a sprinkler monitoring system that is performing ancillary functions, not a fire alarm system. The smoke detectors in the corridors are for smoke fire damper control. The duct detectors are for monitoring and shutdown of the HVAC equipment. The heat detector and elevator lobby smoke detectors are for elevator control functions. The plans have been changed to reflect this information. One notification device is provided in the lobby, per 2001 CBC section 904.3.2. One manual pull station is provided as a means to manual1,' activate the system, if needed. Please feel free to contact Kevin Flint if you have any questions 858-633-9100 x2309 or kflint@simplexel1.com Tr-City Wellness Complex - ECR Corporate Center Review Comments. Page 2 Review Comments Tn-City Wellness Complex - ECR Corporate Center, 6260 El Camino Real, Carlsbad, CA 5'72'y 4C 10OW6W i/2 ,4i' f/cJ / -) C P iL1/C,f ve , 6 PdO 27&() ,t7 QLJ. ;;4 $''?1 /b t)é9 ,i// he / 2) 27 , .'9 /JF'2 ,i,277CA5 7 70 AJ 7?S i& 01 444 óDj / zs Orn/5/'C)L) /? a (z) frfom' 7" . /: y NFPA Record of Completion +\000 Name of Protcted Property TRI-CITY WELLNESS Address 6260 EL CAMINO REAL CARLSBAD Rep. of PrJe-I.ted Property (name/phone) -- Authority Having Jurisdiction Adclress / Phone Number 1. Type(s) of System or Service: X NPA 72, Chapter 3 - Local - If arm is transmitted to location(s) off premise, list where received: NE PA 72, Chapter 3 - Emergency Voice /Alarm Service: QLantity of voice/alarm channels ___________________ Single: Multiple: QLantlty of speakers installed: Quantity of speaker zones: Quantity of telephones or telephone jacks included in the system: - NFPA 72, Chapter 4 -Auxiliary Indicate type of connection: Local Energy, Shunt, Parallel Telephone Location and telephone number for receipt of signals: NF A72, Chapter 4- Remote Station Alarm: -. Supervisory: X NFI'A72, Chapter - Proprietary IT a arms are retransmitted to public fire service communications center or others, Indicate location and telephone number of the organization receiving alarm: PBX IndIcate how alarm is retransmitted: NFF'A 72, Chapter 4 - Central Station: The prime contractor: Certral Station Location: San Diego -. Means of transmission of signals from the protected premise to the central station: Mculloh Multiplex One-Way Radio ___Digital Alarm Communicator Two-Way Radio - Others Me ns of transmission of alarms to the public fire service communications center: - Sysom Location: -. Organization Name I Phone Representative Name / Phone Installer SimplexGrinnell Bob Clereck 858-740-0100 Supplier Simplox Grinnell Mark Walker 858-740-0100 Service Organi;:ation SimplexGrinnell Steve Schwartz 858-740-0100 Page 1 of 1 NFPA Record of Completion (1996 ed.) Locatjcin of (As-Built) Drawings: OFFICE Locatic n of: Owners Manuals: Same Locatic n of Test Reports: A contract, dated for test and inspection in accordance with NFPA standard(s) No(s), dated • Is in effect. Record of System Installation (Fill out after installation is complete and wiring checked for Qpensshorts,ground faults and improper branching but pricr to conducting operational acceptance tests.) This sy:;tem has been installed in accordance with the NFPA standards as shown be!ow,was inspected by Simple iGrinnell on includes the devices shown below and has been service since NFPA 72, Chapters 1 3 4 5 6 7 (Circle all that apply) XNFFA 70 National Electric Code ,Article 760 - X Manufacturers Instructions Other(Specify) Signed: Date: Organization: SimplexGrinnell Record if System Operation All oper.tiorial features and functions of this system were tested by SirnplexGrinnell Date: 11113/2008 and found to he operating properly in accordance with requirements of: XNFPA 72, Chapters 1 3466 7 (Circle all that apply) X NFPA 70, National Electric Code Article 760 X Manufacturer's Instructions —Other( Specify) /1 Signed: -- Date: 1111312008 Organizntion: ell 4, Alarm In tiating Devices and circuits (Use blanks to indicate quantity of devices.) Manual a) 1 Manual Stations x Noncoded,Activating Transmitters Coded b) Combination Manual Fire Alarm and Guard's Tour Coded Stations. Automat c Coverage: Complete X Partial a) 11 Smoke Detectors Ion - X Photo b)3 Duct Detectors Ion X Photo C) 2 Heat Detectors FT RR FT/RR -. PC I Sprinkler Waterfiow Switches Transmitters_ Non coded Activating Coded - I - Other(list): BACKFLOWS 5. Supervisory Signal Initiating Devises and Circuits (Use blanks to indicate quantity of devices,) Guard's Tour _—Coded Stations ________ ,,Noncoded Stations ActIvating - Transmitters C) -- Compulsory Guard Tour System Comprised of Transmitter Stations and Intermediate Ste Note: Co'nbination devices recorded under 4(b) and 5(a). Page 1 of 2 NFPA Record of Completion Sprink er System Coded Valve Supervisory Signaling Attachments Valve Supervisory Switches Activating Transmitters b) _Building Temperature Points C) _—Site Water Temperature Points d)______ Site Water Supply Level Points ElectrkFire Pump: e)_ _Fire Pump Power - Fire Pump Running _—Phase Reversal Engine Driven Fire Pump: _—Selector In Auto Position __Engine Or Control Panel Trouble j) __ Fire Pump Running Engine Driven Generator: k) Selector in Auto Position Control Panel Trouble Transfer Switches __Engine Running Other Supervisory Function(s) (Specify) Alarm Notification Appliances and Circuits Quantity of indicating appliance circuits connected to the System: Types and quantities of alarm indicating appliances installed: Bells - Inch _______ Speakers C) 1 Horns Chimes e)._ —Other: 0. Visual Signals Type: Xenon with audible w/o audible I - Local Annunciator Admin Lobby Signalinq Lire Circuits: Quantity and Style (See NFPA 72, Table 3-8) of signaling line circuits connected to the system. Quantity: 2 Style: Y System Power Supplies Primary Main): Nominal Voltage: I20VAC current Rating: Overcurrent Protection: Type:_ Circuit Breaker - Current Rating: Location Electrical Room !st Floor Secondary (Standby): - X Storage Batteries Amp-Hour Rating CaluIattd capacity to drive system, in hours: X 24 60 Engine driven generator dedicated to fire alarm system: NIA Location of fuel storage: Emergercy/Standby System used as backup to Primary Power Supply, instead of useing a secondary Power supply: Emergency System described in NFPA 70, Article 700 Legally Required Standby System described in NFPA 70, Article 701 - Optional Standby System described In NFPA 70, Article 702, which also meets the performance requirements of Article 700 or 701 Page 1 of I tqcri /Fire & /SirnplexGrinnell I Security I SimplexGrinnell LP 3568 Ruffin Road San Diego, CA 92123 Tele: (858) 633-9100 Fax: (858) 633-9101 www.simplexgrinnell.com FIRE ALARM PRODUCT SUBMITTAL Tri City Wellness Complex ECR Corporate Center 6260 El Camino Real Carlsbad, California 92009 APPROV SUBMITTED Add— RTMENT C/#I These plans have been reviewed for apparent cot npliaitce with the current applicable codes and standards in Ioic in the jurisdiction. The owner or contractor may util,:e this review in support of an application for a budding permit with the express understanding that this review in no way relieves the owner or contractor or their prolssioital engineer or architect lot sole responsibility for full compliance with said codes and standards. including the building etwie or for any responsuhilty for deficiencies, errors. omissions or negligence in these plaits whether or not noted in this review. Dale: 4/0/8 Reviewer:,9 0 RECOMMEND APPROVAL RECOMMEND APPROVAL. AS NOTED ATTENTION: Carlsbad Fire Department equires Double- 2125/2008 Action initiating devices in all common use or )4027321934328301 - Publicly Accessible areas. tLjCQ IF/re & Security l SimplexGrinnell Simplex Grinnell LP 3568 Ruffin Road San Diego, CA 92123 Tele: (858) 633-9100 Fax: (858) 633-9101 www.simplexgrinnell.com TAB# SYSTEM I FIRE ALARM 2 APPENDIX 2/25/2008 REV.#: 0 PROJECT #: 480-402732/934328301 SimplexGrinnell LP / / 3568 Ruffin Road tqcri / Fire & / SiniplexGrinnell San Diego, CA 92123 / Security I Tele: (858) 633-9100 Fax: (858) 633-9101 www.simplexgrinnell.com FIRE ALARM SYSTEM PRODUCTS Item Description Model No C.S.F.M. No. A FIRE ALARM CONTROL PANEL 4010-9101 7165-0026:226 DACT 4010-9810 7165-0026:226 B BATTERIES 12.7AH 2081-9288 N/A C MANUAL PULL STATION 4099-9001 7150-0026:224 D SENSOR BASE 4098-9792 7300-0026:217 SMOKE SENSOR 4098-9714 7300-0026:218 HEAT SENSOR 4098-9733 7300-0026:216 E DUCT DETECTOR 4098-9756 3240-0026:241 SAMPLING TUBE 2098-9797 N/A F HORN/STROBE MULTI-CD WALL 4906-9127 7125-0026:317 G SUPERVISED 1AM 4090-9001 7300-0026:223 H RELAY lAM 4090-9002 7300-0026:223 I INTERPOSING RELAY PAM-SD 7300-1004:101 INTERPOSING RELAY PAM-1 7300-1004:101 J LCD ANNUNCIATOR 4606-9101 7120-0026:225 2/25/2008 REV.#: 0 PROJECT #: 480-402732/934328301 S. Simplex TrueA!arm® Fire Alarm Controls UL, UL C, CSFM Listed; FM Approved; Model 4010 Fire Alarm Control Panel for TrueAlarm MEA (NYC) Acceptance* Analog Sensors and lDNetTM Addressable Devices I 1! II* Standard features include: Up to 250 addressable TrueAlarm sensor or addressable device points using IDNet communications that operate with either shielded or unshielded twisted pair wiring** Four, 2 A notification appliance circuits (NACs) with solid state current protection Power supply/battery charger with 4 A available for NACs and auxiliary power Internal event reporting DACT module (standard on models 4010-9101, 4010-9102, & 4010-9150) UL listed to Standard 864 Installation convenience features: Power-limited design provides electronic modules on a one-piece chassis with up-front terminal blocks for wiring access Compact NEMA 1 rated cabinet is available in beige or red and can be pre-shipped for early installation Setup, programming, and maintenance features: Device level ground fault search, locate, and isolate Auto Program for general alarm operation TrueAlarm individual analog sensing with front panel information and selection access "Dirty" TrueAlarm sensor maintenance alerts, service and status reports including "almost dirty" Default TrueAlarm sensor device type operation TrueAlarm sensor peak value performance report Duplicate address error detection Front panel or PC programming WALKTESPM silent or audible system testt Software verification simulation mode Supports the following IDNet devices: Addressable manual stations; TrueAlarm sensor bases, duct housings, and isolator bases Quad-state zone adapter modules (ZAMs) for initiating device monitoring Quad-state line powered individual addressable modules (lAMs) for initiating device monitoring and relay control 4009 IDNet NAC Extenders and TrueAlert® Addressable Controllers and accessories Available option modules include: Door mounted 24 LED annunciator (std. on ULC models) Network connection, or Point Reporting DACT Class A, NAC adapter module RS-232 ports for printer and maintenance PC Expansion power supply; Auxiliary Relay Module or City Interface Equipment for Suppression Release Applications (refer to data sheet S4010-0003) Compatible with Simplex® auxiliary panels: 4003 Voice Control Panel 4081 Battery Cabinet with charger for 50 Ali batteries 4010 Fire Alarm Control Panel (with standard door) Dscrintic TrueAlarm fire alarm control panels have the ability to provide location accuracy for monitoring and control. When equipped with TrueAlarm analog sensing for smoke and heat detection, the processing power of the control panel also has the ability to analyze conditions at each location to provide accurate detection with significantly reduced maintenance costs. The 4010 TrueAlarm Fire Alarm. Control Panel has been specifically designed to provide addressable operation and analog detection in a cost-effective package for application sizes that previously were considered only appropriate for conventional zoned monitoring. Installation and Service Ease. The 4010 mounts on a single chassis for quick installation and removal. Terminal blocks are large and up-front for easy access and inspection. Optional modules are easily and quickly installed, and programmed as required. The 4010 cabinet provides convenient stud markers for drywall thickness and nail-hole knockouts for quicker mounting. Smooth cabinet surfaces are provided for locally cutting conduit entrance holes exactly where required. 4010 cabinets and electronics can be ordered separately, allowing early cabinet installation. Ground Fault Assistance. Ground fault problems often occur during installation. The 4010 provides isolating circuitry, control of isolator bases, and software-controlled sequencing to isolate ground faults to specific identified locations. This assistance helps the installer to accurately locate the wiring problem for quicker repair. * Refer to page 6 for listing details. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7170-0026:226 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Safety Products Westminster. ** TrueAlarm analog smoke detection and IDNet addressable devices are protected by one or more of the following U.S. Patents: 5155468; 5,173683; 5,543,777; 5,400,014; 5,552,765; 5,552,763; DES. 377,460; 4,796,025; 5,966,002; and 6,034,601. t WALKTEST system testis protected under U.S. patent #4,725,818. S4010-0001-10 2/2006 Extensive Feature List. The 4010 Fire Alarm Control Panel provides access to an extensive feature list that includes: Providing easy and powerful operator information with a logical, menu-driven display Extensive and automatic diagnostics for maintenance reduction History Logs available from the LCD or capable of (optionally) being printed Software Verification, allowing detailed logic programming simulation to be conducted without activating connected outputs Control Panel (or service PC) label editing Password access control Auto Program Quick Configuration (Quick-CFIG) of connected modules and IDNet devices for general alarm operation to quickly get the system up and running rr.i ii .]-ri FTT II] F1.I iD1-r rr r Convenient Status Information. With the locking door closed, a window allows viewing of the status display. The 4010 status panel provides a two line by 40 character, super-twist LCD information display and eight status LED indicators as shown in the illustration below. From this display, the LED indicators will describe the general category of activity being displayed with the LCD providing more detail. For the authorized user, unlocking the door will provide access to the control switches and allow further inquiry by scrolling the display for additional detail. (Refer to control panel functional illustration below.) WALKTEST Diagnostic Operation Mode. The patented WALKTEST process allows a single person to perform system test. The system records test inputs such as intentional alarms or trouble and either logs the response (silent WALKTEST operation) or outputs a brief, recognizable audible notification signal (audible WALKTEST operation). Extended Operator Control Panel Functions FIVE STATUS INDICATOR LEDs provide system status indications in addition to LCD information, LEDs flash to indicate the condition and then when acknowledged, remain on until reset REE PROGRAMMABLE LEDs vde customlabeling (labels insert into 2 X 40 LCD READOUT, LED backlighted during normal conditions and abnormal operating conditions, provides up to 40 characters for custom label information ocket), the toptwo LEDs are re FIRST ALARM DISPLAY: Operation can be selected for maintained display of first ectable as red or yellow, the bottom alarm until acknowledoed D is selectable as green or yellow _______ SYETEM j. - I Mori i9—Jr— 1NTR OL PANEL VlEWwith -- ,' SYSTEM RESET restores 4010 door closed - control panel to normal when , 3I all alarmed inputs are Tl nrT4rF - -- - - - - - - - - ALARM ACK acknowledges a Fire Alarm condition, logs the acknowledge and silences the operator panel and all annunciator tone-alerts SUPV ACK acknowledges system supervisory conditions, logs the acknowledge, and silences the operator panel and all annunciator tone-alerts I NINE EXTENDED FUNCTION KEYS (accessible with \ door open) select and scroll through display prompts for \ locating additional system information, performing \ maintenance functions, or for front panel programming ALARM SILENCE causes audible notification appliances to be silenced, used after evacuation is complete and while alarm source is being investigated TROUBLE ACK acknowledges system troubles, logs the acknowledge, and silences the operator panel and all annunciator tone-alerts S4010-0001-10 2/2006 Overview. The 4010 provides IDNet addressable device communications. Using a two-wire circuit, individual devices such as manual fire alarm stations, TrueAlarm sensors, and sprinkler waterfiow switches can be directly connected (or interfaced) to the IDNet controller to communicate their identity and status. This addressability allows the location and condition of the connected device to be displayed on the 4010 panel LCD and on system annunciators. Additionally, control circuits (fans, dampers, etc.) may be individually controlled by using a relay JAM (individual addressable module). The 4009 IDNet NAC Extender or the TrueAlert Addressable controller can be controlled for local or remote notification appliance expansion. (Refer to compatible device lists on document S4090-001 I and to individual device documentation for further details.) Capacity. A total of 250 addressable monitor and control points maybe intermixed on the same pair of wires. By using Zone Adaptor Modules (ZAMs) or Individual Addressable Modules (lAMs), conventional initiating devices can be connected to the IDNet circuit. IDNet Addressable Operation. The IDNet controller continuously interrogates each addressable device on the communication channel for status condition such as: normal, off-normal, alarm, supervisory, or trouble. Sophisticated poll and response communication techniques ensure supervision integrity and allow for "T-tapping" of the circuit for Class B operation. Wiring Requirements. Refer to the specifications chart below. Distances are for shielded or unshielded wire. Shielded wire may provide protection from unexpected sources of interference and may be required for some applications. Wiring Specifications Size 18 AWG (0.82mm2 ) Wire Preferred Shielded twisted pair (STP) Unshielded twisted pair (UTP) Acceptable Farthest Distance from Control Up to 2500 feet (762 m) Panel to Device Total Wire Length Allowed With Up to 10,000 ft (3 km). "T"_ Taps _for Class B_Wiring ITTr F1111 w_Mfl tIiii1(.]iI TrueAlarm System Operation. IDNet communications are used for TrueAlarm smoke and temperature sensors. Every four seconds, smoke sensors transmit an output value based on their smoke chamber condition. The 4010 CPU maintains a current value, peak value, and an average value of each sensor's output. Status is determined by comparing the current sensor value to its average value. Tracking this average value as a continuously shifting reference point filters out environmental factors that cause shifts in sensitivity. Programmable Sensitivity. The sensitivity of each sensor can be field programmed at the 4010 Control Panel for different levels of smoke obscuration (in percent) or for specific heat detection levels. In order to evaluate whether the sensitivity should be revised, the peak value is stored in memory and can be easily read and compared to the alarm threshold directly in percent. k ITrr iiw1TF1 rII1M.1-f711781'T1aI TrueAlarm heat sensors can be selected for rate-of-rise detection as either 15° F (8.30 C) or 20° F (11.10 C) per minute with an independent fixed limit of 135° F (570 C) or 155° F (68° Q. TrueAlarm heat sensors can also be programmed as a utility device to monitor for temperature extremes in the range from 32° F to 155° F (00 C to 68° Q. This feature can provide freeze warnings or alert to HVAC system problems. To additional IDNet devices, up to 250 total Modular TrueAlarm TrueAlert Addressable Controller I sensor with base Supervised ]AM Modular TrueAlarm sensor With IDNet isolator base Addressable Station F_ 4009 IDNet NAC o~ip Extender Quick-Connect Monitor ZAMs and TrueAlarm sensor Relay lAMs 4010 Fire Alarm Control Panel with annunciator door IM 11111 ,, 4010 Control Panel with Typical IDNet Devices TrueAlarm operation gives the 4010 system the ability to automatically indicate when a sensor is almost dirty, dirty, and excessively dirty. The NFPA 72 (National Fire Alarm Code) requirement for a test of the sensitivity range of the sensors is fulfilled by the TrueAlarm ability to maintain the sensitivity level of each sensor. Modular TrueAlarm sensors use the same base and different sensor types (photoelectric smoke sensor, or heat sensor) can be easily interchanged to meet specific location requirements. This feature also allows intentional sensor substitution during building construction. When conditions are temporarily dusty, instead of covering the smoke sensors (causing them to be disabled), heat sensors may be installed without reprogramming the control panel. Although the control panel will indicate an incorrect sensor type, the heat sensor will operate at a default sensitivity to provide heat detection for building protection at that location. S4010-0001-10 2/2006 TrueAlarm Information Details True Alarm sensor data can be displayed on the system LCD, on a remote maintenance PC, or printed on a remote printer. With the proper operator access, a TrueAlarm Service Report can be generated to list the specific details of each TrueAlarm device. This report, as well as the Status Report can either be displayed on the remote maintenance PC or captured permanently by using a remote 80 character printer. Status and Service Reports. The report samples below illustrate the format provided on either the remote maintenance PC or a printer. This information is available at the system LCD by identifying the specific point of interest and reading one point at a time. Compatible Printer. Model 4190-9013 is aUL Standard 864 listed 80 column, 24 pin dot matrix printer (refer to data sheet S4190-0011). (Model 2190-9039, a 24 VDC, 40 column printer, is compatible with the 4010 for event printing only. Refer to data sheet S2190-0014.) ON- model 4190-9013) V Local maintenance ' $ computer 4010 Fire Alarm " One connection type per 4010, Control Panel selected by module choice; max. '-.i wiring distance is 300 ft (91 m) Th' @ 9600 baud _- Remote authorized maintenance computer connected via dial-up - -' Service Modem Connection RS-232 Connection Options (refer to module selection on page 6) TrueAlarm Status and Service Report Samples Simplex 4010 Fire Alarm System Page 1 REPORT 3 : TrueAlarm Status Report 2:43:03 pm Mon 09-Jan-06 Zone Sensi- Almost Name Custom Label tivity Device Status Dirty Mi-i ANALOG PHOTO CLEAN ROOM 0.5 % NORMAL M1-2 ANALOG ION CLEAN ROOM 1.3 % NORMAL M1-3 ANALOG PHOTO MAIN LOBBY 2.5 % NORMAL *YES* ANALOG PHOTO CONFERENCE ROOM 1 2.5 % NORMAL M1-10 HEAT DETECTOR GARAGE 135 F NORMAL Mi-11 ANALOG PHOTO KITCHEN 3.7 % NORMAL *YES* END OF REPORT Typical TrueAlarm Status Report Information Printout and/or Maintenance PC Screen Simplex 4010 Fire Alarm System Page 1 REPORT 4 : TrueAlarm Service Report 2:56:09 pm Mon 09-Jan-06 Dev Alarm Avg Current! Peak! State Nun Custom Label at: val % alarm % alarm 1 ANALOG PHOTO - CLEAN ROOM 0.5! 83 67 68! 1% 72! 10% NOR 2 ANALOG ION - CLEAN ROOM 1.3/209 94 97/ 2% 101! 1% NOR 3 ANALOG PHOTO - MAIN LOBBY 2.5/185 117 117! 0% 125! 42% NOR 4 ANALOG PHOTO - CONFERENCE ROOM 1 2.5/161 93 93! 0% 93! 0% NOR 10 HEAT DETECTOR - GARAGE 135F!253 --- 63!-67F 66! 69F NOR 11 ANALOG PHOTO - KITCHEN 3.7/216 116 116! 1% 110! 36% NOR END OF REPORT Typical TrueAlarm Service Report Information Printout and/or Maintenance PC Screen 4 S4010-0001-10 2/2006 ITT F17 I fliT I Th! 11*1 N2 Communications for Serial Annunciator Control. Control for up to 6 remote Simplex Annunciator products including 24 Point I/O Module, and LCD Annunciator. Includes extensive troubleshooting diagnostics. (See list in next column for compatible devices.) Access Port. RS-232 service port for connecting PC tools for service diagnostics and for programming the CPU Flash EPROM memory. IDNet Addressable Communications Channel. Addressable channel provides communications for up to 250 remote addressable devices, including TrueAlarm analog sensors and isolator bases (see details on page 3). Four NACs. Class B output is standard, rated for 2 A 24 VDC nominal, with solid state current protection. Class A operation is optional with the addition of an adapter module. NAC operation can be selected for "on-until-Silence" or "on-until-Reset," and can be Continuous, Temporal pattern, or March Time pattern. (March Time is selectable for 20 bpm or 120 bpmfor conventional appliances; or 60 bpmfor SmartSyncTM appliances.) NACs are individually selectable to control Simplex synchronized strobes or for Simplex SmartSync control that provides separate horn and synchronized strobe control using a 2-wire circuit. (Class A, SmartSync circuits require SmartSync Control Module 4905-9938, refer to data sheet S4903-001 0 for details.) Two Auxiliary Output Circuits. Operation is programmable for trouble, alarm, supervisory, or other fire response functions. Output is one Form "C" dry contact each, rated 2 A @ 24 VDC. An optional relay kit is available for switching up to 0.5 A at 120 VAC. Standard Power Supply. Output is rated 4 A for "Special Application" appliances and for "Regulated 24 DC" appliance power. (Special Application appliances include Simplex 4901, 4903, 4904, and 4906 Series horns, strobes, horn/strobes, and speaker/strobes. Seepage 7 for additional information.) Internal system power is provided separately, allowing the 4 A to be available for NAC and auxiliary power tap functions. Over-current protection is solid state and self-resetting. Auxiliary Power Tap. Provides up to 0.5 A of the standard power supply voltage, over-current protected. Compatible uses include power for: remote LCD annunciators, 24 Point I/O modules, sensor bases and duct housings that require external power, and addressable devices requiring external power. Battery Charger. Capable of charging up to 25 Ali sealed lead-acid batteries (4010 cabinet mounted). A recharge time of 24 hours is typical with stable 120 VAC input. For applications requiring larger batteries, external charger/cabinet assemblies are available. A depleted battery cutout feature is programmable to advise and/or to reduce current when battery voltage is low. I J1 PTO M (The 4010 is available with a Simplex Network Interface. 4010 points can be declared "public.") Network Interface, Fixed Media. Available for wired applications. itri I rii rii M R.N.m .riiriaj Network Interface, Modular Media. Available for wired connections or fiber optic. Require separate media modules. May be both wired, both fiber optic, or one of each. DACT, Point Reporting Module. Provides serial output information that can send location details to a remote receiving station. DACT, Event Reporting Module. For applications where simple event status information is required (Alarm, Trouble, Supervisory, and AC power failure). Dual RS-232 Module. Available for interfacing to a printer and a maintenance PC. Single RS-232 Module with Service Modem Connection. Provides one port dedicated for connection to a printer, and a second port dedicated for dial-in from a service computer, typically located off-site. With an off-site computer, programming changes and system diagnostics can be performed remotely, reducing service time for repair or reprogram. Security is maintained by password protection. LITI r.a rrnirrnr 4 A Expansion Power Supply provides two taps of 2 A each, 28 VDC, filtered, non-regulated. Output rating is 4 A for auxiliary power, 4 A for "Special Application" appliances and 2 A for "Regulated 24 DC" appliance power. Battery Meter Module provides panel mounted ammeter and voltmeter for power supply monitoring. Dual Circuit Class A NAC Adapter Module mounts on the main 4010 printed circuit assembly and provides the additional circuitry needed for Class A operation. Dual Circuit City Connect Module provides the interface required for direct wired reporting to conventional city connection circuits. (Available with or without disconnect switches.) Expansion Power Distribution Module provides two additional termination points for the 0.5 A auxiliary power output, or for one tap of the expansion power supply. Relay Option Module provides three relays, one each for Alarm, Supervisory, and Trouble. Relay contacts are selectable for normally open or normally closed and are rated 2 A @ 32 VDC maximum. t'.LII.] 11111111 ii FU rT r1 1T1 r Up to six of the following modules may be connected to the Simplex N2 serial communications bus. 4606-9101 LCD Annunciators provide remote acknowledge, reset, and alphanumeric status display. (Refer to data sheet S4606-0001.) 24 LED Annunciator Doors are standard on ULC listed models and are available as door-only assemblies for electronics only packages or other aftermarket applications. This option uses the 24 Point I/O module with all points pre-assembled as LED outputs, with individual labels and each LED is selectable as red or yellow. 4605 Series 24 Point I/O Modules are available for remote mounting and provide 24 points that can be programmed as either general purpose switch inputs or system controlled outputs. Typical applications are for remote annunciators and monitoring and control of other related processes. (Refer to data sheet S4010-0002.) S4010-0001-10 2/2006 [[Ii ii i.-! rtri.i niiii irrnri wrm zii Description Voltage Color UL Listed 4010 Fire Alarm Control Panel with: door, cabinet, power 120 VAC Beige supply/battery charger, IDNet interface, 4 NACs, 2 programmable Red auxiliary relays, and external N2 communications interface; 4010-9101 Beige and 4010-9102 include internal common event reporting DACT 240 VAC Red Category Control Panel Assembly (select one) Model 4010-9102 4010-9201 40109202 4010-9101C English ULC Listed 4010 Fire Alarm Control Panel; same as above [120 French except: with 24 LED Annunciator door; and without DACT VAC Beige g 4010-9101 CF 4010-9150 UL Listed ULC English Listed French 4010 Fire Alarm Control Panel, Electronics Only; for pre-shipped cabinets, requires door and cabinet ordered separately; 120 VAC input; 4010-9150 has event reporting DACT; C & CF suffix models delete DACT 4010-9150C 4010-9150CF Optional Expansion Slot Features (two slots are available, select modules as required) Category Reporting and Network Modules Model _____________ Description DACT Module (Common Event Reporting) Includes two, 7 ft (2.1 m) long RJ45 cables DACT Module (Point Reporting) 4010-9816 (select one) 4010-9821 Network Interface Module with fixed, wired connections 4010-9817 Network Interface Module, Modular; requires 2 (In/Out) media modules (see below) Media Modules 4010-9818 Network Wired Media Module Media modules mount on the 4010-9817 module Network Fiber Optic Media Module without impact to slot allocation space. 4010-9819 RS232 Communications 4010-9811 Dual RS-232 Interface Module (select one) 4010-9812 Single RS-232 Interface Module with Service Modem connection Chassis Mounted Expansion Modules (select as required) Category Model Description Expansion Power Supply 4010-9813 120 VAC input 4 A Expansion Power Supply; rated 4 A for "Special Application" appliances; 4010-9823 (select one) 240 VAC input rated 2 A for "Regulated 24 DC" appliance power Optional Features 4010-9820 Battery Meter Module (ammeter and voltmeter) (select one) 4010-9825 24 VDC Expansion Power Distribution Module, provides two additional termination points for an expansion power supply tap or the auxiliary power output 4010-9806 Dual Circuit Class A NAC Adapter Module, two maximum Optional Features (select as 4010-9809 Dual Circuit City Connect Module I I indicated) 40109829* Dual Circuit City Connect Module w/o disconnect switches Select one I maximum 4010-9803 Relay Option Module I Accessories Category Model 4010-9826 Description 120 VAC Auxiliary Relay Kit, allows one auxiliary relay to control up to 0,5 A @120 VAC, select as required; 2 maximum Optional Features 4010-9830 (CAF) Suppression Release Appliqué, required for suppression release applications; suffix CAF selects a French appliqué 2975-9801 Semi-flush trim, beige, 1-7/16" (37 mm) wide 2975-9802 Semi-flush trim, red, 1-7/16' (37 mm) wide Batteries 2081-9272 6.2 Ah Battery, 12 VDC (required if 2081-9274 10.0 Ah Battery, 12 VDC batteries are internal; select one C81-92 12,7 Ah Battery, 12 VDC size; two batteries 2081-9275 18 Ah Battery, 12 VDC; NOTE: This battery size will not allow bottom entry conduit are required) 2081-9287 25 Ah Battery, 12 VDC Cabinets (select one if pre-shipped) 2975-9215 Red Cabinet Dimensions: 22" H x 18" W x 5-3/8" D Beige Cabinet; CF suffix has French labels (559 mm x 457 mm x 137 mm) 2975-9214(CF) Doors (select one if pre-shipped or for use with 4010-9150) 4010-9858 Red Door with dress panel Dimensions: 22" H x 18" W x 5/8" D Beige Door with dress panel; CF has French labels (559 mm x 457 mm x 16 mm) 4010-9857(CF) 4010-9860 (CAF)* Beige Door with 24 LED Annunciator and dress panel; Dimensions: 22" H x 18" W x CAF suffix selects French for ULC applications 1-23/32"D (559 mm x 457 mm x Red Door with 24 LED Annunciator and dress panel 44 mm) [see also S4010-0002] 40109861* * As of document revision date: 4010-9829 is not ULC listed; 4010-9860 and 4010-9861 are listed by UL, ULC, and CSFM; and FM approved; 4010-9860CAF is ULC listed and FM approved only. 6 S4010-0001-10 2/2006 4010 Operating Specifications Input Power Requirements AC Input, 120 VAC base models Voltage Range 102 to 132 VAC Frequency 60 Hz Maximum Current 2 A AC Input, 240 VAC base models 204 to 264 VAC 50/60 Hz 1 A AC Input with 120 VAC expansion power supply 102 to 132 VAC 60 Hz 4 A AC Input with 240 VAC expansion power supply 204 to 264 VAC 50/60 Hz 2 A Environmental Operating Temperature Range 32° to 120°F (0° to 49° C) Operating Humidity Range up to 93% RH, non-condensing @ 100.4°F (38° C) maximum Output Ratings Rated 4 A for "Special Application" appliances and for Standard Power Supply Output "Regulated 24 DC" appliance power; Battery charger for up to 25 Ah sealed lead-acid batteries Simplex 4901, 4903, 4904, and 4906 Series horns, strobes, and Special Application combination horn/strobes and speaker/strobes (contact your Simplex Notification Appliance Reference product representative for compatible appliances) Power for other appliances listed to UL Standard 1971 or UL Standard Regulated 24 DC g 464; use associated external synchronization modules where required Auxiliary Power Output Tap from Standard Power Rated 0.5 A maximum @ 19.4 to 32 VDC; Supply subtract current used from standard power supply output Rated 4 A for "Special Application" appliances and auxiliary power; Expansion Power Supply Output Rated 2 A for "Regulated 24 DC" appliance power; Two output taps of 2 A each are provided NAC Ratings 2 A each maximum; up to 33 synchronized strobes maximum per NAC Current Ratings for Optional Modules and Remote LCD Annunciator Model 4010-9810 Module DACT (Common Event Reporting) Supervisory Current 40 mA Alarm Current 40 mA 4010-9816 DACT (Point Reporting) 40 mA 40 mA 4010-9821 Network, wired communications 125 mA 125 mA 4010-9817 Network Modular, add media cards separately 24 mA 24 mA 4010-9818 Network Wired Media 47 mA 47 mA 4010-9819 Network Fiber Optic Media 36 mA 36 mA 4010-9811 Dual RS-232 75 mA 75 mA 4010-9812 Single RS-232 with Service Modem 100 mA 100 mA 4010-9806 Dual Class A NAC Adapter 0 mA 0 mA 4010-9809 Dual Circuit City Connect 20 mA 36 mA 4010-9829 Dual Circuit City Connect w/o disconnect switches 20 mA 36 mA 4010-9803 Relay Option Module 10 mA 37 mA 4010-9860 4010-9861 & ULC 4010s 24 LED Annunciator door 60 mA 83 mA (all LEDs on) 4606-9101 Remote LCD Annunciator (refer to data sheet S4606-0001) 65 mA 140 mA System Current (supplied separate from power supply output) Base System with: no IDNet devices Supervisory Current** 195 mA Alarm Current** 295 mA 50 IDNet devices 230 mA 330 mA 100 IDNet devices 265 mA 365 mA 150 IDNet devices 300 mA 400 mA 200 IDNet devices 335 mA 435 mA 250 IDNet devices 370 mA 470 mA Current Calculation Information: To determine total supervisory current, add currents of modules in panel to base system value and all auxiliary loads. To determine total alarm current, add currents of modules in panel to base system alarm current and add all panel NAC loads and all auxiliary loads. 7 S4010-0001-10 2/2006 TB1 . P, 0 o o TBO T04 4010-9820 4010-9809 Meter Module 4010-9806 : 4010-9806 or -9829 : : or Class A : : Class A CityModule 4010-9825 Module Module or : 24 VDC Power: -9803 • - - - - -, Distribution Relay Module Block ___________________- : ------------------- © 0 0 0 00 oEJ 0 : 4010-9813 -. ---------------- , : or 4010-9823 rV - Expansion Power Supply L------------------- © Expansion Slots 1 & 2 7-3/32" Standard 1-19/32 6-1/4" door profile (40 mm) (159 mm) 5-1/2" (140 mm) Annunciator (19 mm) door profile Wall thickness guides for 1/2" (13 mm) wall board 5/8" (16 mm) thick Wall thickness guides for Standard Door, 5/8' (16 mm) wall board) Annunciator Door, 1-23/32" (44 mm) thick Internal straps are provided for wiring management each side) Door and exposed cabinet dimension for semi-flush mount 2-15/32" (63 mm) ,,Knockout screw/nail holes (for semi-flush mount) 4010 Module Layout Reference EX N2 IDNO NAGS NAC3 NACB N F. S 8,- AUX AUXI AUX2 BATTERY ir1TTrnTi rn.]IImrnT1 POWER I....... - ".Typkaftonduit entry area (cut holes as required) I 18" (457 mm) li"I : 21 (533 mm 14-1/2" (368 mm) Battery Area No conduit entry or wiring in this area Shaded area is for non-power limited wiring Wall board position reference for semi-flush mount Tyco, Simplex, the Simplex logo. TrueAlarm, WALKTEST, IDNet, SmartSync, and TrueAlert are trademarks of Tyco International AG or its affiliates in the U.S. and/or other countries. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFP4). 5w51111P1ex Tyco Safety Products Westminster• Westminster, MA" 0 144 1-0001 USA S4010-0001-10 2/2006 www.tycosafetyproducts-usa-wm.com © 2006 Tyco So/ely Products Westminster. All rights reserved. Al/ specifications and other in/ormation shown were current as ofdocument revision date and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7170-0026:226 Page 1 of 2 CATEGORY: Control Unit (High-Rise) LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 FAX (978) 731-8881 DESIGN: -9201, and —9202 fire alarm control units. Power limited, automatic, manual, local, auxiliary, remote station (protected premises), proprietary (protected premise), waterfiow, and sprinkler supervisory service. Suitable for releasing device service. Refer to listee's data sheet for detailed product description and operational considerations. System components: 4010-9101, -9102, -9201, -9202 4010-9150 4 - 09, -9829 4010-9810 401 -9816 4010-9817 4010-9821 4010-9806 4010-9811 4010-9812 4010-9813 4010-9814 4010-9818 4010-9819 4010-9820 4010-9823 4010-9824 2081-9046 4010-9860, -9861 4010-9803 Control Unit Standard Function I/O City Circuit Card Event Report DACT Point Report DACT Modular Network Interface RS-485 Net Interface Class A Adapter Dual RS-232 Interface RS-232 Service Modem Expansion Power Supply Suppression Release Kit Wired Media Module Fiber Optic Media Battery Meter Module Expansion Supply Suppression Release Kit Coil Supervision Module Replacement Door with Annunciator Relay Module RATING 120, 220, 240 VAC primary; 24 VDC secondary INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING Listee's name, model number, electrical rating and UL label. *Recert 03-29-2006jew Listing No. 7170-0026:226 Page 2 of 2 APPROVAL: Listed as fire alarm control unit for use with separately listed compatible initiating and indicating devices. Suitable for high-rise application when installed with model 4003 Series Voice Evacuation System (CSFM Listing No. 6911-0026:196). Refer to listee's Installation Instructions Manual for details. This control unit can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. *This control unit meets the requirements of UL-864, 9th Edition Standard. NOTE: 1) For Fire Alarm Verification Feature (delay of fire alarm signal), the maximum Retard/Reset/Restart period shall not exceed 30 seconds. 2) Formerly 7165-0026:226 *Recert 03-29-2006jew This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 7, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager LiSimplex Rechargeable, sealed lead-acid design: Lead-calcium grid structure Immobilized electrolyte in absorbent separator High reliability dual seal construction Low maintenance, no need to add water Low self-discharge characteristics One-piece, high impact polystyrene cell cover UL 924 recognized pressure relief valves Available in a variety of capacities: Batteries for internal mounting range from 6.2 Ah up to 50 Ah, depending on control panel cabinet size For applications requiring 110 Ah batteries: Refer to data sheet S4081-0002 for 4100U systems Refer to data sheet S2081-0012 for 4100/4120 series system I ii*.i [llt1iI Simplex® rechargeable sealed-lead acid batteries provide reliable and repeatable discharge and recharge characteristics for use in fire alarm and other systems applications. They are designed with immobilized electrolyte in an absorbent separator, allowing them to provide rated capacity on the first cycle. Because of their sealed construction, packaging is allowed within the system electronics enclosure (see illustration on page 2). When this is applicable, the quantity of system cabinets and the battery wiring distances are both minimized. Fire Alarm Control Panel Accessories Cabinet Mounted System Batteries; 2081 Series, Sealed Lead-Acid; 6.2 Ah to 50 Ah Compatible Sealed Lead-Acid Batteries can be Installed Inside Fire Alarm Control Panel Cabinets I :?J irii (.ThT1!i1i?7JiJ Disposal. Battery chemicals and materials can be recycled. Refer to information shipped with the battery or on its case. Return to the battery manufacturer or to a similarly qualified battery processing facility for proper disposal. Charging. These batteries are intended to be used with compatible Simplex battery chargers. Series Connections. These batteries are required to be connected in series to produce 24 V system voltage. Battery sets must be of identical voltage, model number, appearance, and approximately the same date of manufacture for proper operation. Testing. Battery capacity testing is recommended to be performed by using a sealed lead-acid battery tester designed to withdraw a minimum of battery charge. The preferred tester applies a variety of amplitude and duration controlled test pulses that compares terminal voltage against those predicted for the specific battery size. (Testing is available through your local Simplex product supplier.) Specification Summary Nominal Voltage Rating 12 V/battery Discharge Rating 20 Hour Rate Typical Chart/Discharge Cycles 100 to 150 Preferred Charge Temperature Range 60° F to 90° F (15.6°C to 32.2° C) These batteries meet the requirements of UL, ULC, and Factory Mutual for use with respective equipment battery chargers as listed on page 3. Contact your local Simplex product supplier for proper battery selection per system requirements. S2081-0006-16 9/2004 Inner cover Absorbent se used to imrr e1e Lead-calciur C Typical Construction Details Actual appearance will vary with battery size. Qonind fI I+nr rn,nr Cell case (high impact polystyrene) Potting material, black for negative, red for positive (polarity is also clearly marked with + and -) Pressure relief valve Semi-permeable membrane separator S2081-0006-16 9/2004 Battery Specifications Battery Model Capacity @20 Hour Width* Depth* Height with Approximate Discharge Rate Terminals Weight 2081-9272 6.2 Ah 6-1/8" (156 mm) 2-5/8" (67 mm) 4" (102 mm) 5.75 lbs (2.6 kg) 2081-9274 10 Ah (153 mm) 4-1/16" (103 mm) 4" (102 mm) 9.2 lbs (4.2 kg) 12.7 Ah 6" (153 mm) (102 mm) 4" (102 mm) 9 lbs (4.1 kg) 2081-9275 18 Ah 7-1/4" (184 mm) 3-3/8" (86 mm) 6-5/8" (168 mm) 14.3 lbs (6.5 kg) 2081-9287 25 Ah 6-5/8" (168 mm) (127 mm) (178 mm) 19.4 lbs (8.8 kg) 2081-9271 (rectangular case, 33 Ah 12-1/2" (318 mm) 3-3/8" (86 mm) 7-1/16" (179 mm) 26.6 lbs (12.1 kg) typically for _service) 2081-9276 (square" case, 33 Ah 7-3/4" (197 mm) 5-1/4" (133 mm) 6-3/4" (171 mm) 26.5 lbs (12 kg) use for new) 2081-9296 50 Ah 9-1/2" (241 mm) 1 5-1/2" (140 mm) 1 8-7/8" (225 mm) 1 41.8 lbs (19 kg) * Dimensions and weight are per battery and are for reference only. Exact size may vary. Refer to the chart below for panel mounting compatibility. These batteries are 12 V each and series connected for 24 V system use. NOTE: When installed in a fire alarm control panel, they are to be of identical voltage, appearance, model number, and approximately the same date of manufacture. Battery Compatibility for Fire Alarm Control Panel Mounting NOTE: Refer to individual fire alarm control panel product data sheets for additional battery application information Battery Simplex Control Panel Model Series (see legend and notes below) Capacity Model 4006& 4009 4100U 4100 &4120 4020 4003 I 4004 4004R 4005 4008 (all models) 4010 (2 or 3 bay) (2, 4 or 6-Unit) (2, 4 or 6-Unit) 2081-9272 6.2 Ah / / / / ,( / / / / / 2081-9274 10 Ah / / / / / I 81-92j 12.7 Ah / / / I / 2081-9275 18 Ah / Note 3 / Ext Ext Note 2 2081-9287 25 Ah Note Ext / 1 1 Ext 2081-9271 33 Ah Note 3 Ext Note 3 1 Ext Note 4 (rectangular) 2081-9276 33 Ah Note 3 Ext Note 3 / / Ext (square") 50 Ah _____ 2081-9296 Note 3 Note 3 1 Ext Ext I = Can be placed in the respective equipment cabinet Ext = External battery cabinet is required, refer to selection chart on page 4 Shaded areas = Not applicable NOTES: These batteries meet the requirements of UL, ULC, and Factory Mutual for use with respective equipment battery chargers listed above. Contact your local Simplex product supplier for proper battery selection per system requirements. 4010 Cabinets will accommodate 2081-9275, 18 Ah batteries, but will not allow bottom entry conduit. Use 4081 series companion cabinet and charger, refer to page 4. 4020 Cabinets will accommodate 2081-9271, 33 Ah batteries, but will not allow bottom entry conduit. Some control panel models are listed for battery replacement reference only. S2081-0006-16 9/2004 External Battery Cabinet Compatibility Reference Externally Mounted Battery Battery Cabinets without Chargers Battery * Capacity Cabinets with Chargers - _______ (connects to charger in panel) 4081 Model 20819301** 20819303** Series 20819270** 2081-9281 2081-9282 4009-9801 4009-9802 2081-9275 18 Ah 2081-9287 25 Ah 2081-9271 (rectangular) 33 Ah 2081-9276 ('square") 2081-9296 50 Ah * Batteries smaller than those listed are normally mounted in the product cabinet. ** Refer to Simplex data sheet S2081-0002 for additional information on these remote battery cabinet/charger products. t Refer to Simplex data sheet S4081-0001 for additional information. 1= Can be placed in the respective equipment cabinet Shaded area = Not applicable External Battery Cabinet Specification Reference Model Description Color Dimensions 2081-9281 2-Unit, 4100 style cabinet without charger, with solid door and battery shelf, primarily intended for 50 Ah batteries Beige 25-3/4" W x 20-3/4" H x 6-3/4" D (654 mm x 527 mm x 171 mm) 2081-9282 Red 2081-9270* External battery cabinet without charger Red 26-1/2" W x 12" H x 12" D 2081-9301 External battery cabinet with charger 2081-9302* External battery cabinet without charger and with meters for voltage and current (673 mm x 305 mm x 305 mm) 2081-9303* External battery cabinet with charger and with meters for voltage and current 4009-9801 For up to 18 Ah External battery cabinet without charger, 16-1/4" W x 13-1/2" H x 4-1/8" D batteries with solid door and battery harness, for close-nippled mounting to fire alarm control Beige (413 mm x 343 mm x 105 mm) For up to 33 Ah 25-3/4" W x 20-3/4" H x 4-1/8" D 4009-9802 batteries panel cabinet (654 mm x 527 mm x 105 mm) 4081 For up to 50 Ah Companion cabinet with charger for the Beige or 22-1/2" W x16-3/4" H x 8-3/8" D Series** batteries 4010 and 4004R fire alarm control panel Red (572 mm x 425 mm x 213 mm) * Refer to Simplex data sheet S2081-0002 for additional information. ** Refer to Simplex data sheet S4081-0001 for additional information. Tyco, Simplex, and the Simplex logo are trademarks of Tyco International Services AG or its affiliates in the U.S. and/or other countries. BSirnplex Tyco Safety Products Westminster• Westminster, MA - 0144 1-0001 • USA S20981-0006-16 9/2004 www.tycosafetyproducts-usa-wm.com 0 2004 Tyco Safety Products Westminster. All rights reserved All specifications and other information shown were current as ofdocument revision date and are subject to change without notice. LiSimplex Multi-Application Peripherals UL, ULC Listed; FM, CSFM, MAPNET Il® or IDNetTM Communicating Devices and MEA (NYC) Approved* Addressable Manual Stations Individually addressable manual fire alarm stations with: Power and data supplied via MAPNET II or IDNet addressable communications using a single wire pair** Operation that complies with ADA requirements Pull lever that protrudes when alarmed Break-rod supplied (use is optional) Models are available with single or double action (breakglass or push) operation UL listed to Standard 38 Compatible with Simplex: Model Series 4010/4100/4120/4020 fire alarm control panels equipped with either IDNet or MAPNET II communications Model Series 2120 communicating device transponders (CDTs) equipped with MAPNET II communications Compact, sealed construction: NEIvIA 2 enclosure rating for minimal dust infiltration Allows mounting in standard electrical boxes Screw terminals for wiring connections Tamper resistant reset key lock (keyed same as Simplex fire alarm cabinets) 4099-9001 ddressable Manual Station ront and side view) FFF 79 ONLY 4099-9002 4099-9003 With 2098-9828 Breakglass Push Institutional Cover kit ATTENTION: Carlsbad Fire Department requires Double- Action initiating devices in all common use or Publicly Accessible areas. Multiple mounting options: Surface or semi-flush with standard boxes or matching Simplex boxes Flush mount adapter kit Adapters are available for retrofitting to commonly available existing boxes I ii*.ii Fllti The Simplex model 4099-9001 addressable station combines the familiar Simplex manual station housing with a compact communication module that is easily installed to satisfy demanding applications. Its integral individual addressable module (JAM) constantly monitors status and communicates changes to the connected control panel via MAPNET II or IDNet communications wiring. * This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7150-0026:224 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Additional listings may be applicable, contact Simplex for the latest status. vandalism without interfering with the minimum pull requirements needed for easy activation. The pull lever latches into the alarm position and remains extended out of the housing to provide a visible indication. Double Action Stations. (Breakglass) require the operator to strike the front mounted hammer to break the glass and expose the recessed pull lever. The pull lever then operates as a single action station. Double Action Stations (Push Type) require that a spring loaded interference plate (marked PUSH) be pushed back to access the pull lever of the single action station. Station reset requires the use of a key to reset the manual station lever and deactivate the alarm switch. (If the break-rod is used, it must be replaced.) Station testing is performed by physical activation of the pull lever. Electrical testing can be also performed by unlocking the station housing to activate the alarm switch. MAPNET II and IDNet addressable communications designs are protected by U.S. Patent No. 4,796,025. 0 2000 Simplex Time Recorder Co. All rights reserved. S4099-0001-5 8100 Addressable Manual Stations Model Description 090I) Single action - 4002 Double action, Breakglass operation Addressable manual station, red housing with white 4099-9003 Double action, Push operation letters and white pull lever Accessories Model 2975-9178 Description Surface mount steel box, red Reference Refer to page 3 for dimensions 2975-9022 Cast aluminum surface mount box, red 2099-9813 Semi-flush trim plate for double gang switch box, red Typically for retrofit, refer to page 4 2099-9814 Surface trim plate for Wiremold box V5744-2, red 2099-9819 Flush mount adapter kit, black Refer to page 4 for details 2099-9820 Flush mount adapter kit, beige 2099-9803 Replacement breakglass 2099-9804 Replacement break-rod 2099-9828 Institutional cover kit for field installation on 4099-9001 I Specifications Power and Communications ' MAPNET II or IDNet, 1 address per station, up to 2500 ft (762 m) from fire alarm control panel, up to 10,000 ft (3048 m) total wiring distance (including T-Taps) Address Means Dipswitch, 8 position Wire Connections Screw terminal for in/out wiring, for 18 to 14 AWG wire UL Listed Temperature Range 32° to 120° F (0° to 49° C) intended for indoor operation Humidity Range Up to 93% RH at 100° F (38° F) Housing Color Red with white raised lettering Material Housing and pull lever are Lexan® polycarbonate Pull Lever Color White with red raised lettering Housing Dimensions 5" H x 3 3/4W x 1" D (127 mm x 95 mm x 25 mm) Addressable Manual Station Semi-Flush Mounting Single Gang Box Mount Single gang box, 2 1/2" deep (64 mm), RACO #500 or equal (supplied by others) 0 C 00 4" Square Box Mount 4" (102 mm) square box, 2 1/8" (54 mm) minimum depth, RACO #231 or equal (supplied by others) 7 çTh çjTh (Th/ Mount flush or with 1/16" (2 mm) maxim um extension o1 1 DO NOT RECESS 4" Square box with cover plate E-0) -- / LoY Station 'I side view Single gang cover plate, 3/4" (19 mm) extension, RACO #773 - - - - or equal (supplied by others) -) - Single gang box outline Wall surface FIRE PULL DOWN I Semi-Flush Mount Side View [Simp1ex] Simplex Time Recorder Co. 2 S4099-0001-5 8/00 Addressable Manual Stations Surface Mounting Preferred Mounting. For surface mounting of these addressable manual stations, the preferred electrical boxes are shown in the illustration to the right. 2975-9178 Box 53/16" Hx4" Wx23/16" D (132 mm x 102 mm x 56 mm) (ordered separately) \ 2975-9022 Cast Box 5" F-tx 3 7/8 W x 2 3/16" 0 (127 mm x 98 mm x 56 mm) (ordered separately) o I H Additional Mounting Reference. Refer to page 4 for Wiremold box mounting compatibility. Knockouts located top and bottom [FIRE JRMJ L!] PULL DOWN Access for 3/4" threaded 5" conduit located top and bottom (127 mm) L [ Simplex] 1" (25.4 mm) 3 3/4(95 mm) 4099 Series Addressable Manual Station SurfaceMountSideView withInternalDetail 11/4" WIT-T-1 I11' ii Refer to NFPA 72, the National Fire Alarm Code (reference section 5-8), and all applicable local codes for complete requirements for manual stations. The following summarizes the basic requirements. Stations shall be located in the normal path of exit and distributed in the protected area such that they are unobstructed and readily accessible. Mounting shall be with the operable part not less than 3 1/2 ft (1.1 m) and not more than 4 1/2 ft (1.37 m) above floor level. At least one station shall be provided on each floor. Additional stations shall be provided to obtain a travel distance not more than 200 ft (61 m) to the nearest station from any point in the building. When manual station coverage appears limited in any way, additional stations should be installed. Simplex 2975-9178 box (shown for reference) f 2 5/8" 67 mm) t Switch wiring (prewired) Simplex Time Recorder Co. 3 S4099-0001-5 8/00 Wiremold receptacle box model V5744-2 (supplied by others) 2099-9814 Surface trim for Wiremold box 5 1/8 H x 5" W (130 mm x 127 mm) - LL I if-x 4099-9001 IDNet addressable station ng switch box, each W x 2 3/4" 0 (76 mm x 51 mm x 70 mm) (supplied by others) 2099-9813 Semi-flush trim for 2 gang switch box, 6" H x4 1/2" W (152 mm x 114 mm) Addressable Manual Station, Additional Mounting Information For retrofit and new installations, additional compatible mounting boxes and the required adapter plates are shown in the illustration to the right. Please note that these addressable manual stations will also install onto single gang Wiremold® box model V5747 but will overlap the box. Wiremold V5747 dimensions are: 4 5/8" H x 27/8"Wx 13/8"D(117mm x 73 mm x 35 mm). Addressable Manual Station, Flush Mounting Information Flush mount adapter kit 2099-9819, Black 2099-9820, Beige Box must be recessed into wall 1 1" to 11/8" (25.4 mm to 29 mm) I I 8" (203 mm) 6" HiLL DOWr.: (152 0 : 0 0 Hole cutout must be a minimum of 6" H by 5" W (152 mm by 127 mm) Wall 43/4" (121 mm) surface 6 3/4" (171 mm) Front View 4 11/16" (119 mm) square box, 2 1/8" (54 mm) minimum depth (by others) Side View Simplex, the Simplex logo, MAPNETII, and IDNet are either trademarks or registered trademarks of Simplex Time Recorder Co. in the US. and/or other countries. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFPA). Lexan is a trademark of the General Electric Co. Wiremold is a trademark of the Wiremold Company. SirnpIex visit S4099-0001-5 8/00 Westminster, Massachusetts 01441 -0001 USA us on the world wide web at www.simplexnef.com All specifications and other information shown were current as of printing and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7150-0026:224 Page 1 of 1 CATEGORY: Boxes/Pull Stations LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 FAX (978) 731-8881 DESIGN: -9002, -9003, -9010, *..9o1oTsP *..9o1oTTp -9011, -9012, *..9o12Tsp *..9012TTp and -9031C non-coded addressable manual pull stations. Models 4099-9001 and -9010 are single action stations. Models 4099-9002 and -9011 are breakglass stations. Models 4099-9003 and -9012 includes a push bar which must be punched in before being able to grab and pull down the actuating handle. Model 4099-9031 C is a double action station. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 30 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as manual pull stations for use with separately listed compatible fire alarm control units. Models are intended for use with listee's Models 4010, 4100,4100U and 4020 control units (CSFM Listing Nos. 7170-0026:226, 7165-0026:160 or 7170-0026:187, 7170-0026:250 or 7165- 0026:251 and 7165-0026:178). Model 4099-9013C is intended for use with Model 4010 control unit only. For indoor use piy. Refer to listee's Installation Instruction Manual for details. *Rev. 09-25-03 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager ®Simplex TrueA!arm® Analog Sensing UL, ULC Listed; FM, CSFM, TrueAlarm Analog Sensors - Photoelectric, and NYC, MEA Approved* Ionization, and Heat; Compatible Bases and Accessories OTTM M_ TrueAlarm® analog sensing provides digital transmission of analog sensor values via MAPNET 11 or lDNetTM, two-wire communications** Fire alarm control panel provides: Individual sensitivity selection for each sensor Sensitivity monitoring that satisfies NFPA 72 sensitivity testing requirements Peak value logging allowing accurate analysis for sensitivity selection Automatic, once per minute individual sensor calibration check that verifies sensor integrity Automatic environmental compensation Display of sensitivity directly in percent per foot Multi-stage alarm operation Ability to display and print detailed sensor information in plain English language Photoelectric smoke sensors: Seven levels of sensitivity from 0.2% to 3.7% Heat sensors: Fixed temperature sensing Rate-of-rise temperature sensing Utility temperature sensing Ionization smoke sensors*: Three levels of sensitivity; 0.5%, 0.9% and 1.3% For use with Simplex®: 4010, 4020, 4100, and 4120 Series control panels Universal Transponders and 2120 TrueAlarm CDTs equipped for MAPNET II operation Magnetic test feature Functional and architecturally styled chamber enclosure: Louvered design enhances smoke capture by directing flow to chamber Entrance areas are minimally visible when ceiling mounted Optional accessories include remote LED alarm indicator and output relays UL listed to Standard 268 * These products have been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7272-0026:218, 7271-0026:231, 7270-0026:216, and 7300-0026:217 for allowable values and/or conditions concerning material presented in this document It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Refer to page 4 for ULC listing status. Additional listings may be applicable, contact your local Simples product supplier for the latest status. 4~52or rueAlarm Photoelectric Mounted in Base Description Digital Communication of Analog Sensing. TrueAlarm analog sensors provide an analog measurement that is digitally communicated to the host control panel using Simplex addressable communications. At the control panel, the data is analyzed and an average value is determined and stored. An alarm or other abnormal condition is determined by comparing the sensor's present value against its average value and time. Intelligent Data Evaluation. Monitoring each sensor's average value provides a continuously shifting reference point. This software filtering process compensates for environmental factors (dust, dirt, etc.) and component aging, providing an accurate reference for evaluating new activity. With this filtering, there is a significant reduction in the probability of false or nuisance alarms caused by shifts in sensitivity, either up or down. Control Panel Selection. Peak activity per sensor is stored to assist in evaluating specific locations. The alarm set point for each TrueAlarm sensor is determined at the host control panel, selectable as more or less sensitive as the individual application requires. Timed/Multi-Stage Selection. Sensor alarm set points can be programmed for timed automatic sensitivity selection (such as more sensitive at night, less sensitive during day). Control panel programming can also provide multi-stage operation per sensor. For example, a 0.2% level may cause a warning to prompt investigation while a 2.5% level may initiate an alarm. Sensor Alarm and Trouble LED Indication. Each sensor base's LED pulses to indicate communications with the panel. If the control panel determines that a sensor is in alarm, or that it is dirty or has some other type of trouble, the details are annunciated at the control panel and that sensor base's LED will be turned on steadily. During a system alarm, the control panel will control the LEDs such that an LED indicating a trouble will return to pulsing to help identify the alarmed sensors. " TrueAlarm analog sensors and MAPNET 11and lDNetcmnmunicatons are protected by one or more of the following U.S. Patents: 5,155,468; 5,173,683; 5,543,777; 5,400,014; 5,552,765; 5,552,763; 4,796,025; DES. 377460. S4098-0019-8 12/01 TrueAlarm Sensor Bases and Accessories [ g :ff 11I i t*i Base mounted address selection: Address remains with its programmed location Accessible from front (dipswitch under sensor) Automatic identification provides default sensitivity when substituting sensor types Integral red LED for power-on (pulsing), or alarm or trouble (steady on) Locking anti-tamper design Magnetically operated functional test Mounts on standard outlet box FI-hlf.] Standard sensor base 4098-9789, Sensor base with wired connections for: 2098-9808 Remote LED alarm indicator or 4098-9822 relay (unsupervised) 4098-9791, Sensor base with supervised relay driver output (not compatible with 2120 CDT): Relay operation is programmable and can be manually operated from control panel Use with remote mount 2098-9737 relay Also includes wired connections for remote LED alarm indicator or 4098-9822 relay .i.]IflTT1 2098-9737, Remote or local mount supervised relay: DPDT contacts for resistive/suppressed loads, power limited rating of 3 A @ 28 VDC; non-power limited rating of 3 A @ 120 VAC (requires external 24 VDC coil power) 4098-9822, LED Annunciation Relay: Activates when base LED is on steady, indicating local alarm or trouble DPDT contacts for resistive/suppressed loads, power limited rating of 2 A @ 28 VDC; non-power limited rating of 1/2 A @ 120 VAC, (requires external 24 VDC coil power) 4098-9832, Adapter plate: Required for surface or semi-flush mounting to 4" square electrical box and for surface mounting to 4" octagonal box Can be used for cosmetic retrofitting to existing 6-3/8" diameter base product 2098-9808, Remote red LED Alarm Indicator: Mounts on single gang box ALARM (shown in illustration to right) 0 Simplex Dserintir TrueAlarm sensor bases contain integral addressable electronics that constantly monitor the status of the detachable photoelectric, ionization, or heat sensors. Each sensor's output is digitized and transmitted to the system fire alarm control panel every four seconds. Since TrueAlarm sensors use the same base, different sensor types can be easily interchanged to meet specific location requirements. This feature also allows intentional sensor substitution during building construction. When conditions are temporarily dusty, instead of covering the smoke sensors (causing them to be disabled), heat sensors may be installed without reprogramming the control panel. Although the control panel will indicate an incorrect sensor type, the heat sensor will operate at a default sensitivity providing heat detection for building protection at that location. liviounting rceierence Electrical Box Requirements: (boxes are by others) Without9J: 4" octagonal or 4" square, 1-1/2" deep; single gang, 2" deep ithrela: 4" octagonal or 4" square, 1-1/2" deep, with 1-1/2" extension ring 4" (102 mm) Square Box 4" (102 mm) Octagonal Box Surface mount reference-.., LO 1-1/2" (38 mm) minimum box depth Flush mount reference, mount even with final surface, or with up to 1/4" (6.4 mm) maximum recess -------------------------------------------------- 2098-9737 Relay (mounts in 4098-9822 Relay (mounts base electrical box or remotely) in base electrical box) Relay Size: 2-1/2" X 1-1/2" X 1" (3.75 cubic inches) (64 mm 38 mm X 25.4 mm) NOTE: Review total wire count, wire size, and accessories being wired to determine required box volume. ------------------------------------------------- 6-3/8" (162 mm) 4098-9832 Adapter Plate, required for 1/4" mounting to surface mounted boxes (6.4 mm) and 4" square flush kgz 4-7/8" (124 mm) 15/16" I (24 mm) 0 TrueAlarm Bases 4098-9789, -9791, & -9792 S4098-0019-8 12/01 Ciii TrueAlarm p otoelectric sensors use a stable, pulsed infrared LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. Seven levels of sensitivity are available for each individual sensor, ranging from 0.2% to 3.7% per foot of smoke obscuration. Sensitivity is selected and monitored at the fire alarm control panel., The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. A built-in screen keeps insects from entering the smoke chamber. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow. I 4-7/8" (124 mm) "I J - status indicator (54 mm) 4098-9714 Photoelectric Sensor with Base i'ii:m v [I] j i ri1iIIh!.] TrueAlarm Ionization sensors use a single radioactive source with an outer sampling ionization chamber and an inner reference ionization chamber to provide stable operation under fluctuations in environmental conditions such as temperature and humidity. Smoke and invisible combustion gases can freely penetrate the outer chamber. With both chambers ionized by a small radioactive source [Am 241 (Americium)], a very small current flows in the circuit. The presence of particles of combustion will cause a change in the voltage ratio between chambers. This difference is measured by the electronics in the sensor base and digitally transmitted back to the control panel for processing. Three levels of sensitivity are available for each ionization sensor: 0.5, 0.9, and 1.3% per foot of smoke obscuration. 4 4-7/8" (124 mm) LED status indicat (54 mm) 7----71 ____ TrueAlarm Sensors I1!l* Sealed against rear air flow entry Interchangeable mounting EMI/RFl shielded electronics Heat sensors: Selectable rate compensated, fixed temperature sensing with or without rate-of-rise operation Listed to UL Standard 521 for 60 ft (18.3 m) spacing for 135° F (57.2° C) alarm, and 40 ft (12.2 m) spacing for 155° F (68° C) alarm Smoke Sensors: Photoelectric or ionization technology sensing 360° smoke entry for optimum response Is11:k2 ! a•i TrueAlarm heat énsors are self-restoring and provide rate compensated, fixed temperature sensing, selectable with or without rate-of-rise temperature sensing. Due to its small thermal mass, the sensor accurately and quickly measures the local temperature for analysis at the fire alarm control panel. Rate-of-rise temperature detection is selectable at the control panel for either 15° F (8.3° C) or 20° F (11.1° C) per minute. Fixed temperature sensing is independent of rate-of-rise sensing and programmable to operate at 135° F (57.2° C) or 155° F (68° Q. In a slow developing fire, the temperature may not increase rapidly enough to operate the rate-of-rise feature. However, an alarm will be initiated when the temperature reaches its rated fixed temperature setting. TrueAlarm heat sensors can be programmed as a utility device to monitor for temperature extremes in the range from 32° F to 155° F (0° C to 68° C). This feature can provide freeze warnings or alert to HVAC system problems. (Refer to specific panels for availability.) 4-7/8' (124 T LED status indicator (60 mm) 4098-9733 Heat Sensor with Base 4098-9717 Ionization Sensor with Base TT1 tr'uti WARNING: In most fires, hazardous levels of smoke and toxic gas can build up before a heat detection device would initiate an alarm. In cases where Life Safety is a factor, the use of smoke detection is highly recommended. Sensor locations should be determined only after careful consideration of the physical layout and contents of the area to be protected. Refer to NFPA 72, the National Fire Alarm Code. On smooth ceilings, smoke sensor spacing of 30 ft (9.1 m) may be used as a guide. For detailed application information, refer to 4098 Detectors, Sensors, and Bases Application Manual (5 74-709). S4098-0019-8 12/01 I ITT! iiwi1 I-f flTI 7TM&M F TI1I. TiI TrueAlarm Sensor Bases Model I Description Compatibility I Mounting Requirements Standard Sensor Base, no options Sensors 4098-9714, -9733, & -9717 " octagonal or 4" square box, 1-112' mm. I depth; or single gang box, 2" mm. depth Sensor Base with connections for 4098-9789 (C) Remote LED Alarm Indicator or Unsupervised Relay Sensor Base with connections for 4098- ' / 9791 'C' Supervised Remote Relay and connections for Remote Alarm Indicator or Unsupervised Relay TrueAlarm Sensors Model Description 1C) Photoelectric Smoke Sensor 4098-9717 (C) Ionization Smoke Sensor (4098-973Cl Heat Sensor Sensors 4098-9714, -9733, & -9717 2098-9808 remote LED alarm indicator or 4098-9822 relay Sensors 4098-9714, -9733, & -9717 2098-9737 remote relay (supervised) 2098-9808 remote alarm indicator or 4098-9822 relay (unsupervised) Compatibility Bases 4098-9792, 4098-9789, and 4098-9791 4" octagonal or 4" square box Box depth requirements depend U1 total wire count and wire size, refer to accessories list below for reference. Mounting Requirements Refer to base requirements TrueAlarm Sensor/Base Accessories Model Descriution Comoatibilitv Moijntinn Rpnitirpmints Remote Mounting requires 4" octagonal or 2098-9737 Supervised Relay, mounts remote For use with 4098-9791 base 4" square box, 1-1/2" minimum depth or in base electrical box Base Mounting requires 4" octagonal box, 2-1/8" deep with 1-1/2" extension ring 2098-9808 Remote Red LED Alarm Indicator on single gang stainless steel plate Bases 4098-9789 and 4098-9791 Single gang box, 1-1/2" minimum depth Relay, tracks base LED status 4" octagonal box, 2-1/8" deep with 1-1/2" 4098-9822 (C) (unsupervised, mounts only in base extension ring electrical box) Required for surface or semi-flush 4098-9832 Adapter Plate Bases 4098-9792, -9789, & -9791 mounted 4" square box and for surface mounted 4" octagonal box 1<eier to publication 4U&e uetecrors, sensors, and eases Application Manual (b14-109) tor additional intormation. ULG listed model numbers are designated by (C) and require a "C" suffix such as 4098-9794C. General Operating Specifications Communications and Sensor Supervisory Power MAPNET II or IDNet, auto-select, 24-40 VDC w/data, 400 j.iA typical, 1 address per base Communications Connections Screw terminals for in/out wiring, 18 to 14 AWG Remote LED Alarm Indicator Current 1 mA typical, no impact to alarm current Remote LED Alarm Indicator and Relay Connections Color coded wire leads, 18 AWG UL Listed Temperature Range 32° to 100° F (0° to 38° C) Operating with 4098-9717 or 4098 -9733 Temperature Range with 4098-9714 32° to 122° F (0° to 50° C) 15° to 122° F (-9° to 50° C) Humidity Range 10 to 95% RH Smoke Sensor 4098-9714, Photoelectric Sensor Ambient Ratings 4098-9717, Ionization Sensor Air velocity is 0-2000 ft/mm (0-610 rn/mm) Air velocity is 0-100 ft/mm (0-30 m/min); Altitude is up to 8000 ft (2.4 km) Housing Color Frost White 4098-9791 Base With Supervised Remote Relay 2098-9737 (see page 2 for contact ratings) Externally Supplied Relay Coil Voltage 18-32 VDC (nominal 24 VDC) Supervisory Current 270 pA, from 24 VDC supply Alarm Current with 2098-9737 Relay 128 mA, from 24 VDC supply 4098-9822 Unsupervised Relay, Requirements for Bases 4098-9789 and 4098-9791 (see page 2 for contact ratings) Externally Supplied Relay Coil Voltage 1 18-32 VDC (nominal 24 VDC) Supervisory Current Supplied from communications Alarm Current 1 13 mA from separate 24 VDC supply Tyco, Simplex, the Sin,plex logo, TrueAlarm, MAPNETII, and IDNet are trademarks of 7)co International Services AG or its affiliates in the U.S. and/or other countries NFPA 72 is a registered trademark of the National Fire Protection Association (NFPA). 55SinipIex Westminster, Massachusetts 01441-0001 USA www.simplexnet.com S4098-0019-8 12/01 © 2001 Simplex Time Recorder Co. DBA TEPG-US (a Tyco company,). All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-0026:217 Page 1 of I CATEGORY: Misc. Devices/Control Unit Accessories LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 Fax (978) 731-8881 DESIGN: Model 098-789, -9789E, 9789T5P, -9789TTP, -9791, -9791E, -9791T5P, 9791TTP, -9792E, -9792T5P, 9792TTP, -9793, -9793E, -9793T5P, -9793TTP, -9794, - 9794T5P, -9794TTP, -9795, -9795T5P, -9795TTP, -9796, -9796T5P, -9796TTP; *GsA4098.. 9792, *..9793 *..9795 and *..9796 smoke detector bases. These bases act as an interface between the sensor and the MAPNET controller. Bases are intended for use with the following units: Models 4098-9714 and *G5A4098..9714 series photoelectric smoke detector (CSFM Listing No. 7272-0026:218); Model 4098-9717 ionization smoke detector (CSFM Listing No. 7271-0026:231); and Models 4098-9733 and *GSA4098..9733 heat detector (CSFM Listing No. 7270-0026:216). Models 4098-9795, -9795TSP, -9795TTP, -9796, - 9796TSP, -9796TTP; *GSA4098..9795 and *..9796 are only intended for use with Models 4098-9754 or *GsA4098..9754 photoelectric smoke detector *(CSFM Listing No.7272- 0026:218). Refer to listee's printed data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as detector bases for use with listee's separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. Models 4098-9794, -9794TSP, -9794TTP, -9795, -9795TSP, -9795TTP; and *GsA4098..9795 employ a sounder, which is also suitable for use as a fire alarm audible signaling device. These base/sounders CAN NOT produce the temporal code pattern in accordance with NFPA 72, 2002 Edition. If this temporal code is required, the sounder/base unit must be used with the control unit that can produce the temporal pattern. *Rev. 03-03-2005 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or .+ recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7272-0026:218 Page 1 of 1 CATEGORY: Photoelectric Smoke Detector LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 Fax (978) 731-8881 DESIGN: Model 40~ anaoag 9714TSP, -9714TTP, -9754 -9754T5P, -9754TTP; *GsA4o98..9714 and *..975 hotoelectric type smoke detectors. Units are intended for use with smoke detector bases Models 4098-9789 9789T5P, -9789TTP, -9791, -9791T5P, -9791TTP, -9792, -9792T5P, 9792TTP, -9793, 9793TSP, -9793TTP, -9794, -9794TSP, -9794TTP; *GSA4098.9792 and *.9793 (CSFM Listing No. 7300-0026:217). Models 4098-9714, -9714T5P and -9714TTP are listed for use with Models 4098-9750, -9751, -9752 and -9753 duct detector units (CSFM Listing No. 3240-0026:220) and Models 4098-9755, -9755T5P and -9755TTP duct detector units (CSFM Listing No. 3240-0026:241). Models 4098-9754, -9754TSP, -9754TTP; *GSA4098..9754 analog photoelectric type smoke detectors employ an integral supplemental heat sensor (1350 F fixed temperature and 1200 F rate of rise). This heat sensor is intended for use as a supplemental device to the smoke detector and is not intended for use in lieu of required heat detectors. Refer to listee's printed data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. Model 4098-9714 with Model 4098-9751 is suitable for installations inside air ducts with air velocities between 0-2000 fpm. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as photoelectric smoke detectors for use with listee's separately listed Models 4100, 4010, 4020, 4120 and *4008 series fire alarm control units. Refer to listee's Installation Instruction Manual for details. *Rev. 03-03-2005 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7270-0026:216 Page 1 of 1 CATEGORY: Heat Detector LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 FAX (978) 731-8881 DESIGN: Model 4098-9733 r *GSA4og8..9733 electric combination rate compensated, fixed temperature, an rate of rise heat detector. Intended for use with models 4098-9789, -9791, -9792, *9793; *G5A4098..9792 or *..9793 detector base (CSFM Listing No. 7300- 0026:217). Refer to listee's printed data sheet for additional detailed product description and operational considerations. RATING: 135°F and 155°F INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical/temperature ratings and UL label. APPROVAL: Listed as heat detector for use with listee's separately listed 4100, 4010, 4020, 4120 and *4008 series fire alarm control units. Refer to listee's Installation Instruction Manual for details. *Rev. 03-03-2005 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager B®Simplex TrueA!arm® Analog Sensing UL, ULC, CSFM Listed; FM Approved; Addressable Duct Sensor Housings with TrueAlarm MEA (NYC) Acceptance* Photoelectric Sensor; Available with Multiple Relay Control I1! I t4- Compact air duct sensor housing with clear cover to monitor for the presence of smoke** Includes factory installed TrueAlarm photoelectric smoke sensor and features: Individual sensor information processed by the host control panel to determine sensor status Digital transmission of analog sensor values via IDNetTM or MAPNET Il®, 2-wire communicationst Programmable sensitivity, consistent accuracy, environmental compensation, status testing, and monitoring of sensor dirt accumulation Model 4098-9755: Basic duct sensor housing (no relay output) powered by IDNet/MAPNET II communications Mode 4098-9 ~ousirg : Duct sensor with supervised output for multiple remote relays; requires separate 24 VDC; includes one relay Relay output is under panel control At the panel, relay output can be activated manually or in response to a separate alarm or other input General features: UL listed to Standard 268A Clear cover allows visual inspection Test ports provide functional smoke testing access with cover in place Mounts to rectangular ducts or round ducts; minimum size is 8" (203 mm) square or 18" (457 mm) diameter Magnetic test feature for alarm initiation at housing Optional weatherproof enclosure is available separately (refer to data sheet S4098-0032) Diagnostic LEDs (on interface board): Red Alarm/Trouble LED for sensor status and communications polling display Yellow LED for open or shorted trouble indication of supervised relay control (4098-9756 only) Sampling tubes (ordered separately): Available in multiple lengths to match duct size Installed and serviced with housing in place Remote module options (ordered separately): Remote red status/alarm LED (2098-9808) Remote test station with LED (2098-9806) 4098-9843 remote relays (refer to page 2 for details) * These products have been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 3240-0026.241 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Additional listings may be applicable; contact your local Simples product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Safety Products Westminster. Duct Sensor Sensor Housing, Front and Bottom View —01 2098-9808 2098-9806 Remote Status/Alarm Indicator and Test Station ductic Operation. Simplex® compact air duct smoke sensor housings provide TrueAlarm operation for the detection of smoke in air conditioning or ventilating ducts. Sampling tubes are installed into the duct allowing air to be directed to the smoke sensor mounted in the housing. I IiJTi7.1 Ftiujji1:I: gij .Ini inffi1i1 Digital Communication of Analog Sensing. Analog information from the sensor is digitally communicated to the control panel where it is analyzed. Sensor input is stored and tracked as an average value with an alarm or abnormal condition being determined by comparing the sensor's present value against its average. Intelligent Data Evaluation. Monitoring each photoelectric sensor's average value provides a software filtering process that compensates for environmental factors (dust, dirt, etc.) and component aging, providing an accurate reference for evaluating new activity. The result is a significant reduction in the probability of false or nuisance alarms caused by shifts in sensitivity, either up or down. Please note that smoke detection in air ducts is intended to provide notification of the presence of smoke in the duct. It is not intended to, and will not, replace smoke detection requirements for open areas or other non-duct applications. t lrueAlarrn sensors and IDNet and MAPNET II communications are protected by one or more of the following U.S. Patents: 5,155,468; 5,173,683; 5,543,777; 5,400,014; 5,543,777; 5,710,541; 0383,407; 0388,352; D392,573; 4,796,025. S4098-0030-5 3/2007 lTT..1 iLL.] &.j .11 Control Panel Selection. Peak activity per sensor is stored to assist in evaluating specific locations. The alarm set point for each sensor is determined at the control panel, selectable as the individual application requires. Sensor Status LED. Each sensor housing's red status LED (located on the electrical interface board) pulses to indicate communications with the panel. If the control panel determines that a sensor is in alarm, or that it is dirty or has some other type of trouble, the details are annunciated at the control panel and that sensor housing's status LED will be turned on steadily. During a system alarm, the control panel will control the LEDs such that an LED indicating a trouble will return to pulsing to help identify any alarmed sensors. (Remote Status/Alarm LEDs track the operation of the sensor housing LED.) iTTi1 F flflT ____________________________________________________ calibration check verifies sensor integrity TrueAlarm photoelectric sensors use a stable, pulsed infrared LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. ________ lain. M, r.iTn nyiii,rraJ Typically duct sensor applications require less sensitive settings (such as 2.5% per foot obscuration) due to the ducts being a relative dirty environment. However, the standard seven levels of TrueAlarm sensor sensitivity are available for each individual sensor, ranging from 0.2% to 3.7% per foot of smoke obscuration. Sensitivity is selected and monitored at the fire alarm control panel. I ii iiis .1171I 1iT1I Individual smoke sensitivity selection Sensitivity monitoring that satisfies NFPA 72 sensitivity testing requirements Peak value togging allows accurate analysis for sensitivity selection • Automatic, once per minute individual sensor Automatic environmental compensation Smoke sensitivity is displayed in percent per foot Ability to display and print detailed sensor information in plain English language Relays of model 4098-9756 are under panel control for ON, OFF, or override Duct Smoke Sensor Housing with Photoelectric Sensor* Model Description Compatibility 4098-9755 Basic Duct Sensor Housing; operating power is supplied by Simplex fire alarm control panel models 4010, 4020, 4100, 4100U, and 4120. Also 2120 CDT if either IDNet or MAPNET II communications (no relay output) configured for MAPNET II, TrueAlarm operation Duct Sensor Housing with supervised multiple relay output Same as above except relay operation is not compatible with 2120 CDT; 4.098-9756 .9756 requires separate 24 VDC fire alarm power and 4081-9008 end-of-line resistor harness; includes one 4098-9843 relay Relay output is for up to 15 total 4098-9843 Relays (additional relays are ordered separately) Remote LED Indicator and Test Station, Select One if Required Model Description Compatibility 2098-9808 1 Red LED status indicator 4098-9755 2098- 06 Test Station with keyswitch and red LED status indicator 4098-9756 98 (turning switch to "TEST" initiates alarm for system testing) Mounting Use single gang box, 3" Hx2"Wx2" D (76 mm x 51 mm x 51 mm) Epoxy Encapsulated Remote Relay and End-of-Line Resistor Model Description Compatibility Location Relay; single Form C (7 A @ 120 VAC); refer to pages 3 and 4 4098 9756 on Locate relays within 3 ft 4098-9843 for additional relay information; one included with 4098-9756; connect u to (1 m) of device being wiring is 18 AWG (0.82 mm2 ) color coded wire leads p controlled per NFPA 72 4081-9008 End-of-Line Resistor Harness; 10 k, 1/2W; (ref. 733-894); 4098-9756 At last relay location required to supervise remote relay coil connection * Each duct housing includes an internally mounted model 4098-9714 TrueAlarm photoelectric sensor and an exhaust tube. A correctly sized sampling tube (ordered per application) is required, refer to chart below. Sampling Tube Selection Chart, Ordered Separately Per Duct Width, Select One Overall Duct Width (305 mm) Tube Required 2098-9796 Suggested Cut Length 1/2" (12.7 mm) longer than duct width to 23" (330 mm to 584 mm) 99804 1/2" (12.7 mm) longer than duct width 24" to 46" (610 mm to 1168 mm) (2098-9797) 2" (51 mm) longer than duct width 46" to 71" (1168 mm to 1803 mm) ö78 2" (51 mm) longer than duct width 71" to 95" (1803 min to 2413 mm) 2098-9799 2" (51 mm) longer than duct width S4098-0030-5 3/2007 n 0 Ono no iellow LED, relay control trouble indicator (4098-9756 only) sensor status LED [Side of duct}-.. ng terminals - Ma netic test area - - Mount as shown (preferred) or 3asketsd with electronics area located to sensor area] the LEFT or UP ONLY , k Sampling tube '\ X, access hole screws I 'ii T-.] : F1TflflTU IF11I ti NOTE: Refer to Installation Instructions 574-776 for additional detail and ma ntenance information. 4098-9714 Smoke sensor, mounted in sDecial nt1ace base (suDDIied Metal plate with dual holes I for 3/4 (19 mm) conduit, plug supplied for unused hole 3-3/8" (86 mm) () 13/16" 21 mm -1 Test ports (2) provided ] Sampling tube, ordered for measuring airflow separately per duct width and for aerosol injection Gaskets Exiaust tube (supplied) Duct wall End View with Duct and Tubes DucthousiY 118" Round duct outlin _(minimum diameter) I Square duct utl)Diine 6x 7,abe F Sampling tube, keyed for proper hole alignment with holes facing into airflow (template is provided for proper tube installation) 4098-9843 emote Relay (7 A @ 12 for use with 4098-9756 only) NOTE: Mount in separate electrical box within 3 ft (1 rr) of device being controlled per NFPA 2 (38 fl-n) 1-3/16" (30 mm) 3 S4098-0030-5 3/2007 Preferred Duct Sensor Locations: I. A minimum of six duct widths downstream from bends or inlets to avoid air turbulence. On the downstream side of filters to detect fires in the filters. In return ducts, ahead of mixing areas. Upstream of air humidifier and cooling coil. With accessibility for test and service. For additional information, refer to NFPA 90A, Standardfor the Installation ofAir Conditioning and Ventilating Systems. Locations to Avoid: Where dampers closed for comfort control would interfere with airflow. Next to outside air inlets (unless the intent is to monitor smoke entry from that area). In return air damper branch ducts and mixing areas where airflow may be restricted. Outdoor Applications Note: For outdoor applications, refer to data sheet S4098-0032 for information on weatherproof enclosure 4098-9845. IDuct Sensor !TurThReference, Exhaust Sensor 7' Damper OK Exhaust -LIIJi ,Return Air Do not locate sensor here Return air damper Fresh Supply air Air Filter' " Sensor Do not locate sensor re bank OK Bend or other obstruction Return air" minimum t( widths 6 Duct ffP inlet 6 Duct midths minimum Specifications General Mechanical and Environmental Air Velocity Range (linear ft/mm) 300 to 4000 ft/mm (91 to 1220 rn/mm) Sensor Sensitivity Range 0.2% to 3.7% per foot of obscuration, selectable at host control panel UL Listed Temperature Range 32° F to 1000 F (0° C to 38° C) Operating Temperature Range 32° F to 122° F (0° C to 50° C) Storage Temperature Range 0° F to 140° F (-18° C to 60° C) Humidity Range 10% to 95% RH, non-condensing Wiring Connections Terminal blocks, 18 to 12 AWG (0.82 mm2 to 3.31 mm2 ) Housing Color Remote Status/Alarm LED and Test Station with Remote Alarm LED Current Black base with clear cover Remote Status/Alarm LED 1.2 mA, no impact to 24 VDC alarm current (2098-9808 or 2098-9806) Test Station Keyswitch Current 3.3 mA, no impact to 24 VDC alarm current (2098-9806) Remote Alarm LED and Test Station Distance 250 ft (76 m) maximum Addressable Operation Data Communications IDNet or MAPNET II communications auto-select one address per housing' provides operating power to model 4098-9755 Model 4098-9756 with Supervised Multiple Relay Control Requires Separate Fused 24 VDC from Fire Alarm Power Supply Input Voltage 18-32 VDC (24 VDC nominal) Standby Current 13 mA @ 24 VDC Alarm Current (one relay activated) 15 mA @ 24 VDC; add 15 mA for each additional remote 4098-9843 relay For use with 4098-9843 relay only, quantity of 15 maximum; distance of 500 ft Supervised Remote Relay Control Output (152 m) maximum; requires 4081-9008 (ref. 733-894) 10 k, 1/2 Wend-of-line resistor 4098-9.8,43.. Relay Output Ratings Single Form C use with Model 4098-9756 Only Coil Current 15 mA @ 24 VDC, up to 15 maximum per relay control output - Relay Contacts 7 A at 0.35 PF @ 28 VDC & 120 VAC 250 1.tA © 5 VDC Location Distance I 500 ft (152 m) maximum to relay coils; relays must be within 3 ft (1 m) of device being controlled per NFPA 72 Tyco, Simplex, the Simplex logo, TrueAlarm, IDNet, and MAPNET I/are trademarks o/Tyco International Services AG or its affiliates in the U.S. and/or other countries. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFPA). 93 Tyco Safety Products Westminster• Westminster, MA • 01441-0001 • USA S4098-0030-5 3/2007 .Simplex www.tycosafetyproducts-usa-wm.com 0 2007 Tyco Salk/p Products Westminster. All rights reserved. Al/specifications and other information shown were current as /document revision dale and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 3240-0026:241 Page 1 of 1 CATEGORY: Duct Smoke Detector Housing/Base LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441*0001 Contact: Paul Mattern (978) 731-8542 FAX (978) 731-8881 DESIGN: Models 4098-9755, *4098..9755TSp *4098..9755TT 4098-9 ~-88 4098-9756TSP, *4098..9756TTp 4098-9685, 4098-9686, 4098-9687 an photoelectric type air duct smoke detector units and Model 4098-9841 relay (for Model 4098-9688 only). Unit consists of a listed detector head, base, a sampling and an exhaust tube and an enclosure. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Air Velocity: 300 - 4000 feet/mm INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical & air velocity rating, and UL label. APPROVAL: Listed as duct smoke detector units for installation in HVAC systems when used with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. *Rev. 11-06-03 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager p ) 5Simplex lrueAlert® Multi-Candela Notification Appliances UL, ULC, CSFM Listed; FM Approved; SmartSyncTM Operation AudibleNisible Notification MEA (NYC) Acceptance* with Horn and Synchronized Flash, Non-Addressable 17=1 I (-.1 Audible/visible (AN) notification appliances with efficient electronic horn and high output xenon strobe, available for wall or ceiling mount Operation is compatible with ADA requirements (refer to important installation information on page 3) Rugged, high impact, flame retardant thermoplastic housings are available in red or white with clear lens Operates over a two-wire SmartSync circuit to provide: Horns that are controlled separately from strobes on the same two-wire circuit "On-until-silenced" and "on-until-reset" operation on the same two-wire pair SmartSync horn activation of Temporal pattern, March Time pattern (at 60 BPM), or on continuously Strobe appliances on the same circuit operating at a synchronized 1 Hz flash rate Class B (Style Y) operation requires connection to a compatible SmartSync NAC or to SmartSync Control Module (SCM) 4905-9938 Class A (Style Z) operation when connected to the 4905-9938 SCM or with 4100U series fire alarm control panel NACs Wall mount ANs features: Wiring terminals are accessible from the front of the housing providing easy access for installation, inspection, and testing Covers are available separately to convert housing color Optional adapters and wire guards: Wall mount AN adapters are available to cover surface mounted electrical boxes and to adapt to SimplexW 2975-9145 boxes UL listed red wire guards are available for wall or ceiling mount A/Vs Visible notification appliance (strobe): 24 VDC xenon strobe; intensity is selectable as 15, 30, 75, or 110 candela with visible selection jumper secured behind strobe housing UL listed to Standard 1971 Regulated circuit design ensures consistent flash output and provides controlled inrush current Audible notification appliance (horn): Low current, 24 VDC electronic horn with harmonically rich sound output suitable for either steady or coded operation (Temporal or 60 BPM March Time pattern) UL listed to Standard 464 Wall and Ceiling Mount ANs Multi-Candela TrueAlert ANs with horn and synchronized strobe provide convenient installation to standard electrical boxes. The enclosure designs are both impact and vandal resistant and provide a convenient strobe intensity selection. Since each model can be selected for strobe intensity output, on-site model inventory is minimized and changes encountered during construction can be easily accommodated. Wall mount AN housings are a one-piece assembly (including lens) that mounts to a single or double gang, or 4" square standard electrical box. The cover can be quickly removed (a tool is required) and covers are available separately for color conversion. Ceiling mount A/Vs install using standard 4" electrical boxes. Color choice is determined by model number. ff7. rnrr'i r rmu During installation, a selection plug at the back of the housing determines the desired strobe intensity. An attached flag with black letters on a highly visible yellow background allows the selected intensity to be seen at the side of the strobe lens. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7125-0026:317 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Refer to page 2 for listing status of wire guards. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Safety Products Westminster. Simplex multi-candela SmartSync two-wire horn/strobe appliance operation is protected under one or more of the following U.S. Patent Numbers: 5,559,492; 5,622,427; 5,865,527; 5,886,620; 6,281,789; 6,954,137; 7,005,971; and 7,006,003. S4906-0002-3 6/2006 Proper selection of visible notification is dependent on occupancy, location, local codes, and proper applications of: the National Fire Alarm Code (NFPA 72), ANSI A117.1; the appropriate model building code: BOCA, ICBO, or SBCCI; and the application guidelines of the Americans with Disabilities Act (ADA). Multiple Strobes. When multiple strobes and their reflections can be seen from one location, synchronized flashes reduce the probability of photo-sensitive reactions as well as the annoyance and possible distraction of random flashing. The multi-candela strobes of these A/Vs are synchronized by the controlling SmartSync operation NAC. I SmartSync operation mode allows a two-wire circuit to provide the ability to activate both the horn and strobe on the same NAC and then allow the horn to be silenced while the strobe remains flashing. The horn operates as "on-until-silenced" while the strobe operation is "on-until-reset." 4006, 4008, 4100U, and 4010 Fire Alarm Control Panels (refer to individual product data sheets for more information) 4009 IDNet NAC Extender (refer to data sheet S4009-0002) SmartSync Control Module (SCM) 4905-9938 (refer to data sheet S4905-0003) Additional SmartSync compatible notification appliances include separate horns and combination 111M. rr horn/strobe notification appliances. I.-f1 rrii Multi-Candela ANs Model Mounting Housing Color FIRE Lettering Description 4906-9127 Wall Red White Horn with Multi-Candela Strobe; strobe intensity selectable as: 15, 30, 75, or 110 candela; operates with SmartSync two-wire 4906-9129 White Red 4906-9128 Ceiling Red White control 4906-9130 White Red Wall Mount A/V Adapters Model Description Dimensions 4905-9937 Red Surface Mount Adapter Skirt; use to cover 1-1/2" (38 mm) deep 5-3/8" H x 5-1/4" W x 1-5/8" D 4905-9940 White surface mounted boxes (136 mm 133 mmx4l mm) depth with strobe = 4-3/8" (111 mm) 4905-9931 Red Adapter Plate for mounting to Simplex 2975-9145 box (typically for 8-5/16" x 5-3/4" x 0.060" Thick retrofit, may be mounted vertical or horizontal) (211 mm x 146 mm x 1.5 mm) 2975-9145 Red Mounting Box, requires Adapter Plate 4905-9931 SmartSync Control Module Model Description Dimensions 4905-9938 SmartSync Control Module with Class B or Class A output; mounts in 4" 4" x 4-1/8" x 1-1/4" D (102 mm) square box; refer to data sheet S4905-0003 for details (102 mm x 105 mm x 32 mm) Replacement Covers for Wall Mount ANs Model Description Dimensions 4905-9994 Red cover with white "FIRE" lettering 5-1/8" H x 5" W 1-1/2" D 4905-9995 White cover with red "FIRE" lettering (130 mm x 127 mm x 38 mm) Wire Guards and Ceiling Mount A/V Adapter Model Description Dimensions 4905-9961* Wall mount red wire guard with mounting plate, compatible with semi-flush 6-1/16" H x 6-1/16" W x 3-1/8" 0 or surface mounted boxes (154 mm x 154 mm x 79 mm) 49059927* Red Wire Guard for mounting to flush mounted electrical box (216 mm x 156 mm x 76 mm) 49059928* Ceiling Red Adapter Plate, required to mount guard to surface 9" x 7" Mount mounted electrical box (229 mm x 178 mm) 4905-9915 White Surface Mount Adapter Box Extension, use to cover 1-1/2" deep surface mounted boxes 4-3/4" x 6-7/8" x 1-1/2" deep, (121 mm x 175 mm x 38 mm) 4905-9916 Red * UL listed by Space Age Electronics Inc 2 S4906-0002-3 6/2006 I AN Specifications Wall Mount or Ceiling Mount, Common Specifications Rated Voltage Range UL Listed Rating ULC Listed Rating Regulated 24 DC; see Note 1 below 20 VDC to 30 VDC per ULC S526-M878 Flash Rate and Synchronized NAC Loading 1 Hz; with up to 35 synchronized strobes maximum per NAC Environmental; Temperature and Humidity 32° to 122° F (0° to 50° C); 10% to 93%, non-condensing at 100° F (38° C) Connections Terminal blocks for 18 AWG to 12 AWG (0.82 mm2 to 3.31 mm2) ; two wires per terminal for in/out wiring Horn Output Characteristics 2400 to 3700 Hz sweep, modulated at 120 Hz rate Horn Output Voltage 16 VDC 24 VDC 33 VDC Ratings Sound Type (see Note 2) Steady Coded Steady Coded Steady Coded @ 10 ft (3 rn) UL 464 Reverberant Chamber 86 dBA 82 dBA 88 dBA 84 dBA 90 dBA 86 dBA (see Note Anechoic Chamber 92 dBA 91 dBA 94 dBA 95 dBA 96 dBA 96 dBA Housing Dimensions (with lens) 5-1/8" H x 5" W 2-3/4" D (130 mm x 127 mm x 70 mm) Wall Mount Maximum RMS Current Rating per Strobe Setting (see Note 3 below) 15 cd 30 cd 75 cd 110 cd 75 mA 116 mA 221 mA 285 mA Reference RMS Currents 18 VDC at other voltages 24 VDC 70 mA 101 mA 184 mA 243 mA 60 mA 84 mA 143 mA 185 mA Housing Dimensions (with lens) 4-3/4 C' x 6-7/8 W x 2-5/8 D (121 mm x 175 mm x 67 mm) Ceiling Mount Maximum RMS Current Rating per Strobe Setting (see Note 3 below) 15 cd 30 cd 75 cd 110 cd 86 mA 132 mA 250 mA 320 mA Reference RMS Currents 18 VDC at other voltages 24 VDC 81 mA 119 mA 216 mA 283 mA 70 mA 97 mA 167 mA 217 mA NOTES: "Regulated 24 DC" refers to the voltage range of 16 to 33 VDC per UL Standard 1971, Signaling Devices for the Hearing Impaired, changes effective May 1, 2004. This voltage range is the absolute operating range. Operation outside of this range may cause permanent damage to the appliance. Please note that 16 VDC is the lowest operating voltage that is allowed at the last appliance on the NAC under worst case conditions. Coded values are typical of the output measured with a Temporal coded or a March Time coded pulse and with a sound level meter reading on a "fast" setting. Under the same test conditions, coded horn output "peak" sound level readings are typically 4 dBA higher. Anechoic horn output ratings are typically more representative of actual installed sound output. Currents are with horn on steady. The maximum RMS current listed is the device nameplate rating. Strobe designs are constant wattage and the maximum RMS current rating occurs at the lowest allowable operating voltage. (RMS is root mean square and refers to the effective value of a varying current waveform.) Installation Reference, Surface or Semi-Flush Mounting Mounting is compatible with single gang, double gang, and 4" (102 mm) square boxes, 1-1/2" (38 mm) deep, by others Wiring access hole Wring terminals for SmartSync operation Removable cover (too[ required) Mounting Holes: 4" square (4) Single gang (2) Double gang (3) Transparent housing and lens assembly Intensity selection plug, accessible only from rear of housing; 15 factory setting is 15 cd Strobe intensity viewing slot 3 IMPORTANT! WALL MOUNT INSTALLATION HEIGHT REFERENCE Bottom of lens is either even with, or slightly Electrical outline above bottom\ of compatible Irbox boxes NFPA 72 requires 80" (2.03 m) that the entire lens minimum be not less than 80" and not greater than 96" above the finished floor Jr _________ S4906-0002-3 6/2006 Ceiling Mount AN and Guard Installation Reference Ceiling reference, 4" (102 mm) square box, Optional 4905-9928 Adapter Plate, surface mounted box 1-1/2" (38 mm) minimum depth required for surface mounted electrical box -- - Four mounting clamps included, two each side - Ceiling reference - flush mounted box Optional 4905-99151-9916 Adapter, LL recommended for surface mounted box 0 / Wring terminals are Optional 4905-9927 -, (located behind the housing Red Wire Guard End View Strobe intensity viewing slot Intensity selection plug, accessible only from rear of lens housing; factory setting is 15 cd -------------------------------------- Wall Mount Installation Reference; Adapter Plate, Guard, and Adapter Skirt Surface Mounting Reference with Optional Adapter Skirt and Optional Wire Guard Surface mount conduit and box shown for reference 4" (102 mm) square Jj box profile, 1-1/2" ' (38 mm) deep Optional 4905-9961 Wire Guard - AlV Optional Surface Mount Adapter Skirt, 1-1/2" deep: 4905-9937, Red; 4905-9940, White (Conduit knockouts are provided on all four sides) 4905-9931 Adapter Plate 4905-9931 Adapter Plate 4905-9961 Optional Wire Guard (shown here for reference Only, can be used on other mounting options) Tyco, Simplex, the Simplex logo, IDNet, TrueAlert, and SmartSync are trademark-so/Tyco International AG or its a//I/ia/es in the U.S. and/or other countries. NFPA 72 and National Fire Alarm Code are registered trademarks of National Fire Protection Association (NFPA. 5Sirnplex Tyco Safety Products Westminster• Westminster, MA • 01441-0001 • USA S4906-0002-3 6/2006 www.tycosafetyproducts-usa-wm.com © 2006 Tyco Safety Products Westminster. All rights reserved. All specifications and other information shown were current at ofdocument revision date and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7125-0026:317 Page 1 of 1 CATEGORY: Fire Alarm Devices for the Hearing Impaired LISTEE: Simplex, 100 Simplex Drive, Westminter, MA 01441 Contact: Paul Mattern (978) 731-8542 FAX (978) 731-8881 DESIGN: 906-9129 wall mount and Models 4906-9128 and 4906-9130 ceiling mount multi-candela horn/strobes. Refer to listee's data sheet for detailed product description and operational considerations. RATING: Electrical: 16-33 Vdc Candela: 15, 30, 75, ll0cd INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. For indoor use only. MARKING: Listee's name, model number, electrical/candela rating, and UL label. APPROVAL: Listed as multi-candela horn/strobes with a signaling appliance suitable for the hearing impaired when used with listee's separately listed fire alarm control units. All models require the use of Model 4905-9938 (CSFM Listing No. 7125-0026:235) sync control module unless the horn/strobes are used with the listee's Model 4010 (CSFM Listing No. 7170-0026:226) or 4100 (CSFM Listing Nos. 7170-0026:250 and 7165-0026:251). Refer to listee's Installation Instruction Manual for details. 07-22-2004 VQ This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or + recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager £LSimplex Multi-Application Peripherals UL, UL C, CSFM Listed; FM Approved; lDNetTM and MAPNET It® Communicating Devices, MEA (NYC) Acceptance* Individual Addressable Modules (lAMs) IDNet or MAPNET II addressable communications supply both data and power over a single wire pair to provide**: Supervised Class B monitoring of normally open, dry contacts Total wiring distance from JAM to supervision resistor(s) of up to 500 ft (152 m) Monitored connection is compatible with Simplex® 2081-9044 Overvoltage Protectors for outdoor wiring or electrically noisy applications For use with following Simplex control panels: Model Series 4008, 4010, and 4100U fire alarm control panels for IDNet communications Model Series 4100!4100U, 4120, 4020, and 2120 Communicating Device Transponders (CDTs) equipped with MAPNET II communications Model 4090-9001: Enclosed design minimizes dust infiltration Mounts in standard single gang electrical box Screw terminals for wiring connections Visible LED flashes to indicate communications Optional covers are available to allow LED to be viewed after installation (requires mounting bracket, ordered separately) Model 4090-9051: Encapsulated design for extended exposure to high humidity (LED is not present on this model) Color coded 18 AWG leads for wiring IDNet communications provides current limited monitoring: Provides monitoring of tamper switch (supervisory) and waterfiow switch (alarm) on same circuit using one point Available with IDNet communications only Multiple operation modes are available and are selectable at the control panel: . Contact closure status can be tracked Momentary contact closure conditions can be selected at the panel to be latched or tracked (not available with the 2120 CDT) UL listed to Standard 864 4090-9001 pervised AM (s roximately 3/4 size) 4090-9051 Supervised lAM (shown approximately 3/4 size) DAsrrintir Individual addressable modules (lAMs) receive both power and communications from a two-wire MAPNET II or IDNet circuit. They provide location specific addressability to a single initiating device (such as single station smoke detector alarm contacts or heat detector contacts) or multiple devices at the same location by monitoring normally open dry contacts and the wiring to an end-of-line resistor. Model 4090-9001 is packaged in a thermoplastic housing and provides screw terminal connections and a status indicating LED. Model 4090-9051 is an encapsulated package with wire leads. It does not provide a status indicating LED. * These products have been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safely Code. See CSFM Listing 7300-0026:223 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for ** IDNet and MAPNET II addressable communications are protected under U.S. Patent use - City of New York Department of Buildings - MEA35-93E. Additional listings may be Nos. 4,796,025; 5,966,002; and 6,034,601.. applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Safety Products Westminster. S4090-0001-8 2/2006 L!J 'Ii i!1 Contact Closure. Closure of the monitored contact(s) initiates an alarm or other response as programmed at the fire alarm control panel. An open in the monitored circuit wiring will cause a trouble to be reported. Panel Selections. Selections can be made at the control panel to maintain the alarm condition if the initiating device contacts are momentary, such as from a rate-of-rise heat detector, or to track the device contact status (not available with the 2120 CDT). [si' i i ii U In, R For use with IDNet communications only, these lAMs can provide quad-state sensing of normal, open circuit, short circuit, and current limited conditions. (Program type is "T-sense.") With the proper end-of-line and current limiting resistors, dual functions such as tamper switch and waterfiow switch monitoring can be determined and communicated by a single addressable point. I iI zi rrri rtr;;i Model Description jIooi Supervised lAM, mounted in thermoplastic housing with screw terminals; see applicable options below 4090-9051 Supervised lAM, encapsulated with wire leads Optional Trim Plates and Mounting Bracket for Model 4090-9001 Model Description 4090-9806 For semi-flush mounted box Trim plate with LED viewing window, requires 4090-9810 mounting bracket, 4090-9807 For surface mounted box includes mounting screws; galvanized steel 4090-9810 Mounting bracket, mounts lAM to electrical box and provides screw holes for trim plate, required for optional trim plates End-of-Line Resistor Harnesses (ordered separately as required) Model Reference No Description 4081-9004 733-886 6.8 kn, 1/2W; Standard end-of-line resistor harness for N.O. contact supervision 4081-9003 733-896 4.7 kc2, 1/2W 4081-9005 733-984 1.8 kQ, 1/2W Use for current limited monitoring applications Specificati( N M I -- Electrical Power and Communications MAPNET II or IDNet, auto selected, 1 address per lAM Input Requirements Normally open, dry contacts Wire Connections 4090-9001 4090-9051 Screw terminals for in/out wiring, 18 to 14 AWG wire (0.82 mm2 to 2.08 mm2 Color coded wire leads, 18 AWG (0.82 mm2), 8" long (203 mm) Reference Documents Installation Instructions Field Wiring Diagrams 574-331 for 4090-9001; 579-572 for 4090-9151 842-073 for IDNet operation; 841-804 for MAPNET II operation Wiring Distances Distance from lAM to Contacts 500 ft (152 m) maximum without protectors 400 ft (122 m) maximum with 2081-9044 Overvoltage Protectors Wiring Distance Reference per channel, MAPNET II or I 2500 ft (762 m) maximum from fire alarm control panel IDNet Communications 110,000 ft (3048 m) maximum total wiring distance (including T-Taps) Mechanical Dimensions 4090-9001 4090-9051 1-9/16" W x 1-3/4" H x 1-1/4" D (40 mm x 44 mm x 32 mm) 1-9/16" W x 1-9/16" H x 9/16" D (40 mm x 40 mm x 14 mm) Housing Material, 4090-9001 Black thermoplastic Encapsulation Material, 4090-9051 Epoxy, beige Temperature Range 32° to 120° F (0° to 49° C) intended for indoor operation Humidity Range Up to 93% RH at 100° F (38° C) S4090-0001-8 2/2006 Mounting Information 4090-9001 IDNet Field wiring shown supervised IAM for reference I I s1L[ II I I II I I I I I I DATE CODE II I Ii I I1//A LI LED viewing port Single gang electrical box 2-1/2" (64mm) minimum depth (supplied by others) Address setting under resealable label Single gang blank cover plate and mounting screws, for use when LED is not required to be externally viewed (supplied by others) Mounting Reference, Single Gang Blank Cover Plate 4-1/4" (105 mm) _ Light pipe for © LED viewing r (114 mm) DISCORNEcT POWER DOCONSECT POWER L BEFORE SERV[ONGJ BErORE SERV.EING © © CD 2-1/2" ___ (64 mm) 4090-9806, Trim plate for semi-flush mounted box 2-13/16"No (72 mm) 4090-9807, Trim plate for surface mounted box 4090-9810 Mounting bracket, ordered separately NOTE: These mounting plates require mounting bracket 4090-9810. Optional Trim Plates and Mounting Bracket for Visible LED 3 S4090-0001-5 212006 4090-9051 Mounting Information Address setting is at rear of housing 4090-9051 Encapsulated Supervised lAM El Single gang electrical box 2-1/2' (64mm) minimum depth (supplied by others) Single gang blank cover plate and mounting screws (supplied by others) Tyco, Simplex, the Simplex logo, MAPNETII, and IDNet are trademarks of Tyco International Services AG or its affiliates in the U.S. and/or other countries. BSirriplex Tyco Safety Products Westminster- Westminster. MA • 01441-0001 • USA S4090-0001-8 2/2006 www.tycosafetyproducts-usa-wm.com 0 2006 Tyco Safety Products Westminster. All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice. £®Simplex UL, ULC Listed; FM, CSFM, and MEA (NYC) Approved* Iku it* IDNet addressable interface modules** for use with Simplex® models 4010 and 4100U fire alarm control panels 4090-9002, Individual Addressable Relay Module (Relay lAM): A single addressable point provides control and status tracking of a Form "C" contact Low power latching relay design allows IDNet communications to supply both data and module power Compact, sealed construction: Enclosed design minimizes dust infiltration Mounts in standard 4" square electrical box Screw terminals for wiring connections Visible LED flashes to indicate communications Optional covers are available to allow LED to be viewed after installation UL listed to Standard 864 Desrintk IDNet Relay lAMs allow fire alarm control panels to control a remotely located Form "C" contact using IDNet addressable communications for both data and module power. Typical applications would be for switching local power for control functions such as elevator capture, or control of HVAC components, pressurization fans, dampers, etc. Relay status is also communicated requiring only one device address. I rrri-ii rtri Description 4090-9002 2 Relay lAM Optional Trim Plates Model Description 4090-9801 Trim plate with LED For semi-flush viewing window, includes mounted box mounting screws; painted For surface 4090-9802 beige mounted box * This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:223 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Multi-Application Peripherals IDNetTM Co ting Devices Model 4090-9002 elay lAM 4090 Series IDNet Relay lAM Package (shown approximately 1/2 size) rifirifir (Refer to Installation Instructions 574-184 for additional information.) 4010 or 4100U IDNet, 1 address per Communications device Relay lAM Power Supplied by IDNet communications Relay lAM Contacts (Form"C",SPDT( 2 A @ 24 VDC, for transient Power-Limited Rating suppressed loads 1 A @ 24 VDC for inductive loads Nonpower-Limited Rating 1/2 A @ 120 VAC, for transient suppressed loads Wire Connections Screw terminals for in/out wiring, 18 to 14 AWG wire (0.82 to 2.08mm2 ) Up to 2500 ft ( 762 m) from fire alarm control panel Up to 10,000 ft (3048 m) total wiring IDNet Wiring Reference distance (including T-Taps) Compatible with Simplex 2081-9044 Overvoltage Protectors Dimensions 4-1/8"H x 4-1/8"W x 1-3/8" D (105 mm 105 mmx35 mm) Housing Material Black thermoplastic Mounting Plate Material Sheet metal, galvanized Temperature Range 32° to 120° F (0° to 49° C), intended for indoor operation Humidity Range Up to 93% RH at 100° F (38° C) ** IDNet addressable communications are protected by U.S. Patent No. 4,796,025. S4090-0002-5 4/02 Relay JAM Mounting Information - Address setting under - resealable label - - \ -- 4(102 mm) square box, 2-1/8" (54 mm) minimum depth, RACO 232 or equal (supplied by others) 4090-9002 Relay IAM Double gang blank cover plate and mounting screws, for use when LED is not required to externally viewed (supplied by others) Mounting Reference, Double Gang Blank Cover Plate 4-9/16" (116 mm) © © —4-9/16" (116 mm)- 4090-9801, Trim plate for semi-flush mounted box © © nclin" Light pipe for LED viewing (109 mm) 11 ©©1 4 4-5/16" (109 mm) 4090-9802, Trim plate for surface mounted box Optional Trim Plates for Visible LED Tyco, Simplex, the Simplex logo, and IDNet are trademarks of Tyco International AG or its affiliates in the U.S. and/or other countries 5Sirnplex TEPG-US 91 Technology Drive • Westminster, Massachusetts • 01441-0001 • USA S4090-0002-5 4/02 © 2002 TEPG-US (a Tyco company). All rights reserved. All specifications and other information Www.tepg.com shown were current as of document revision date and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-0026:223 Page 1 of 1 CATEGORY: Misc. Devices/Control Unit Accessories LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 FAX (978) 731-8881 DESIGN: * 090-9001 OO1TSP, -9001TTP, and -9051 Supervised lAM Monitor Module; 4090-9002 9002TSP, and -9002TTP lAM Relay Module; 4090-9106, -9I06TSP, and -9 Class "A" ZAM Initiating Module; 4090-9101, -91O1TSP, and -9I0ITTP Class "B" ZAM Initiating Module; and 2190-9173 Two-Point I/O Module. Refer to listees data sheet for additional detailed product description and operational considerations. RATING: 24 VDC 30 VDC for Models 4090-9002 series INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. For indoor use only. Refer to listee's Installation Instruction Manual for details. "Re 03-29-2006 jew This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager The PAM Series Relays are encapsulated multi-voltage devices with "flying" leads that offer versatile, reliable performance in a convenient package. Several of the versions provide a red LED which, when illuminated, indicates coil energization. The PAM Series Relays are packaged with a self-tapping screw and a piece of double sided tape for easy installation almost anywhere. The relays are also packaged with wire-nuts to aid installation. PAM Relays are ideal for applications where remote relays are required for control or status feedback. They are suitable for use with HVAC, temperature control, fire alarm, security, energy management, lighting control systems and building automation systems. PRODUCT DESCRIPTION PAM-I Tfi—eFAM- I Relay provides 10.0 Amp form C contacts. The relay may be energized by one of three input voltages: 24VDC, 24VAC, or I 2OYAC. The input voltages are polarity sensitive and diode protected. A red LED is provided which, when . 1 illuminated, indicates the relay coil is energized. PAM-2 The PAM-2 Relay provides 7.0 Amp form C contacts. The relay may be energized by one of two input voltages: I 2VDC or 24VDC. The input voltages are polarity sensitive and diode protected. A red LED is provided which, when illuminated, indicates the relay coil is energized. PAM-4 The PAM-4 Relay provides 10.0 Amp form C contacts. The relay may be energized across a wide voltage range from 9VDC to 40VDC, making it ideal for I 2VDC and 24VDC EOL circuits. The I 5mA operating current is constant across the operating range. The input voltages are polarity sensitive and diode protected. (D The PAM-SD Relay provides TO Amp form C contacts. The relay may be energized by an input voltage between I8VDC to 32VDC, making it ideal for 24VDC NAC circuits. The input voltages are polarity sensitive and diode protected. The PAM-SD provides an additional set of wires for redundant input voltage (circuit supervision pass through). LISTED 0 CSFM LISTED MEAAPPROVED uistrioutea Air Products and Controls Inc. 1749E. Highwood Pontiac, MI 48340 (888) 332-2241 (248) 332-8807 Fax www.ap-c.com A HALMA GROUP COMPANY WIRING RELAY ENERGIZED LED VI BLU') YEL NC 10.OAMP CONTACTS kNO) øV( ) WIlT RELAY ENERGIZED LED +24VDC @ 0.015A GRY YEL LUC\ 7.OAMP +12VDC @ 0.01 5A RED ORG NO CONTACTS NC PAM-2 TO 4OVDC ILNC 10.0 AMP 9VDC RED BLU C \) ORG NO) CONTACTS 0.015A (-) PAM-4 WHT 1BVDC TO YEL C 32VDC (-) ((_) ~BLU NC 0) 7.0 AMP @ (+) CONTACTS 0.015A ()RED PRODUCT SPECIFICATIONS MODEL NUMBER: IRADD. rn,vI- I) rnu,I-L mlvi-, rnIvu-ou J COIL VOLTAGE: 24VAC/24VD/120VAC 12VDC/24VDC 9 to 40VDC 18iVbC POLARIZED: YES YES YES YES ENERGIZED LED INDICATOR: YES YES NO NO CURRENT REQUIREMENT @12VDC @24VDC @24VAC @12OVAC 15mA 15mA 15mA 15mA 15mA 15mA 31mA 19mA CONTACT CONFIGURATION: (1) SPDT Dry Form "C" (1) SPDT Dry Form "C" (1) SPDT Dry Form "C" (1) SPDT Dry Form "C" CONTACT RATINGS: (Contact rating! Power Factor) @5VDC @24VDC @120VAC 250pA 1 .35 250pA / .35 250pA 250pA! .35 7A! .35 7A / .35 7A 7A I .35 iDA 7A/.35 10A 7A/.35 WIRELEADS: 12! 18 AWG 12"! 18 AWG 12! 18 AWG 12"! 18 AWG AMBIENTTEMPERATURE: (@ 100% RH, Condensing) -58°F to 185°F (-50"C to 85"C) -58"F to 185°F (-50°C to 85"C) -58"F to 185°F (-50°C to 85"C) -58"F to 185°F (-50°C to 85°C) CONSTRUCTION: 100% Potted (Sealed) with "Flying" Leads MOUNTING: Pre-Drilled mounting screw hole and self tapping screw provided. Double sided tape provided. DIMENSIONS: H W 0 1.5" (38.1 mm) 1.5(38.1mm) 1.5(38.1mm) 1.5" (38.1mm) 1" (25.4mm) 1" (25.4mm) 1" (25.4mm) 1.875' (30.16mm) .875" (22.2mm) .875" (22.2mm) .875' (22.2mm) .8125' (20.64mm) LISTINGS AND APPROVALS: UL": MEA: UOXX!2!7.S3403 UOXXI2!7.S3403 UOXX/217.53403 UO)O(!2!7.53403 73-92-E Vol. 21 73-92-E Vol. 21 73-92-E Vol. 21 73-92-E Vol. 25 ('!PM' 7flfl-1ftt'I4'1 fti 7I1tt-1ftfl4'1 (11 7flfl-1 flflt'Ut1 71fttt..1 nrtd'i (ti °UOXXrControl Unit Accessories, System; /2a1s0 Component; I7°°also Certified for Canada NOTICE: The information contained in this document is intended only as a summary and is subject to change without notice. The products described have specific instructional/ installation documentation, which covers various technical, approval, code, limitation and liability information. Copies of this documentation along with any general product warning and limitation documents, which also contain important information, are provided with the product and are also available from Air Products and Controls Inc. The information contained in all of these documents should be considered before specifying or using the products. Any example applications shown are subject to the most current enforced local/national codes, standards, approvals, certifications, and/or the authority having jurisdiction. All of these resources, as well as the specific manufacturer of any shown or mentioned related equipment, should be consulted prior to any implementation. For further information or assistance conceming the products, contact Air Products and Controls Inc. Air Products and Controls Inc. reserves the right to change any and all documentation without notice. © Air Products and Controls Inc. 2002 DS-RL-1 VER0502 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-1004:101 Page 1 of I CATEGORY: Misc. Devices/Control Unit Accessories LISTEE: Air Products and Controls Inc., 1749 East Highwood, Pontiac, Ml 48340 Contact: Richard Steele (248) 332-3900 FAX (248) 332-8807 DESIGN: Models MR-101/C, MR-1041C, MR- MR-201/CX, MR-204/C, MR-204/CX, PAM-1 PAM-2, PAM-2X, PAM-3, PAM-4 PAM-SD IC-1, RIC-2, *R1C3 *R1C4 *MRRI - 01, *MR..RIC.305 *MRRIC401 and * - -405 relay modules. Models MR-101/C, -201/C and -201/CX may employ suffix -R or -S. *The MR-RIC series relay modules will employ IT, /C, or IC/R suffixes. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION MARKING APPROVAL: In accordance with listee's printed installation instruction, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. Listee's name, electrical rating and UL label. Listed as relay modules for use with separately listed compatible fire alarm control units. Refer to manufacturer's Installation Manual for details. *Rev. 03-01-2006 jew This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation V criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 1, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager Simplex System Accessories, LCD Annunciators UL, ULC, CSFM Listed; FM Approved; 4606-9101 LCD Annunciator for 4010, MEA (NYC) Acceptance* 4006, and 4008 Fire Alarm Control Panels Remote LCD annunciator for use with Simplex® model 4010, 4006, and 4008 fire alarm control panels LCD readout provides: Two lines of 40 characters each Wide viewing angle, super-twist design LED backlighting Control switches and status LEDs for: Alarm, supervisory, or trouble acknowledge (keyswitch access controlled) Alarm silence System reset Three programmable LED indicators: Two LEDs are selectable as red or yellow One LED is selectable as green or yellow With provisions for custom labeling Additional features: Information is transmitted over a single twisted, shielded pair; separate wiring is required for 24 VDC control panel power Tone-alert sounder provides local audible indication Lamp and LCD are functionally tested each time the keyswitch is turned on Mounts flush on standard 6-gang electrical box Mounting and trim options: Surface mount box model 2975-9217 (ordered separately) Brushed aluminum trim model 4603-9111 (ordered separately) Description Local Annunciation. 4606-9101 LCD Annunciators allow compatible fire alarm control panels to provide information and control switches at convenient locations away from the control panel. The LCD is an 80 character, back-lit, alphanumeric display with information presented in clear and descriptive English. Typical content includes: point status (alarm, trouble, etc.), alarm type (smoke detector, manual station, etc.), number of system alarms, supervisory conditions, troubles, and custom location labels up to 40 characters long. (Some 4006/4008 messages are limited to 20 characters, refer to the control panel documentation for additional information.) IS NORMAL E 7: JJ 0 77 .;: 9101CD Annunciator Description (Continued) Communications. Data communications require a single twisted, shielded pair that supports other annunciators on the same communications channel. Model 4010 Series panels control up to six annunciators; model 4006 and 4008 Series panels control up to four annunciators. Indications. Alarm, Supervisory, and Trouble conditions are also indicated by dedicated LEDs and a tone-alert audible indication. Each condition has a dedicated acknowledge push-button switch that silences the tone-alert but leaves the LED on until all conditions in that category are restored to normal. Activity Scrolling. Repeated operation of the appropriate acknowledge switch will scroll the LCD display showing activity in the sequence of occurrence. The internal tone-alert also sounds to indicate the operation of any of the push-button switches. Operation Keyswitch Access. All switches on the annunciator are controlled by the "ENABLE" keyswitch with a key that is removable only in the disabled position. Enabled Operations. When enabled, notification appliances can be deactivated by pressing the "ALARM SILENCE" switch. Pressing the "SYSTEM RESET" switch restores the system to normal operation. When system activity is normal, the LCD displays the time, date, and "SYSTEM IS NORMAL." * This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7120-0026:225 for allowable values and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Accepted for use - City of New York Department of Buildings - MEA35-93E. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Safety Products Westminster. S4606-0001-5 2/2006 ITr1T71 Model Description Remote LCD Annunciator with beige trim 4603-9111 Brushed aluminum trim option Refer to specifications on page 3 2975-9217 Matching surface mount box; ivory finish for additional details 4081-9011 Line matching resistor harness; 100 Q, 1/2W; (reference no. 733-974) 2081-9044 Overvoltage protector; required where annunciator communications and power wiring exits and enters a building; refer to data sheet S2081-0016 for details 4606-9101 Operator Information 2 X 40 LCD READOUT, LED backlighted during normal conditions and abnormal operating conditions FIVE STATUS INDICATOR LEDs provide system status indications in addition to LCD information; THREE PROGRAMMABLE LEDs, LEDs flash to indicate the condition and then when each with custom labeling pocket acknowledged, remain on steady until reset \! SYSTEM IS NORMAL 12: 35: 15 'm MON_:l7l -JAN 06 \ \5 simplex ALARM ACK acknowledges a Fire Alarm condition and silences the panel and all annunciator tone-alerts SUPV ACK acknowledges system supervisory conditions and silences the panel and all annunciator tone-alerts TROUBLE ACK acknowledges system troubles and silences the panel and all annunciator tone-alerts CONTROL ENABLE KEYSWITCH controls all switch functions; key is removable only in disabled position SYSTEM RESET restores control panel to normal when all alarmed inputs are returned to normal ALARM SILENCE causes audible notification appliances to be silenced; used after evacuation is complete and while alarm source is being investigated 2 S4606-0001-5 2/2006 4606-9101 LCD Annunciator Specifications General Operating Specifications Voltage 18 to 32 VDC, system supplied Normal Operating Current 110 mA (with LED backlighting on) Battery Standby Current 65 mA (during battery backup, LED backlighting is turned off after 30 seconds without switch activity) Alarm Current 140 mA maximum (LED backlighting is on and tone-alert is sounding) Operating Temperature Range 32° to 120° F (0° to 49° C) Operating Humidity Range Up to 93% RH, non-condensing at 100° F (38° C) Communications For 4010 Panels* Type N2 external annunciator communications line Up to 6 annunciator modules total, 4606-9101 or 4605 series, 24 point I/O modules Capacity Type N2 communications format but with different capacity For 4006 & 4008 Up to 4 annunciator modules total; compatible with 4606-9101, 4610-9111, and Panels* Capacity door mounted LED annunciator Wiring Data Single twisted, shielded pair, 18 AWG (0.82 mm2) Requirements Power and Earth 18 to 12 AWG (0.82 mm2 to 3.31 mm2) wires for 24 VDC system power and Earth ground for electrical box (ground per local code) Bus-style wiring Up to 4000 ft (1219 m); 0.58 hF (580 nF) maximum capacitance; 35 L) maximum Distance resistance "T-Tap" wiring Up to 10,000 ft (3048 m) total wiring; up to 2500 ft (762 m) to farthest device Line Matching Bus-style wiring Connect one at panel and one at end of line 100 Q, 1/2 W; PID 4081-9011; Resistor "T-Tap" wiring Connect one at panel and one at farthest device (part number 733-974) Mounting Information Trim Dimensions 4-1/2" H x 11-13/16" W (114 mm x 300 mm) Assembly Depth 1-5/16" (33 mm), 1-1/2" at terminal block location (38 mm) Standard Trim Finish Steel, painted beige 4603-9111, Optional Trim Brushed aluminum (ordered separately) Boxes for Masonry boxes Flush Six-gang box, 2-1/2" (64 mm) deep minimum RACO # 960, 2-1/2" deep or RACO # 965, 3-1/2" (89 mm) deep or equal Mounting Single gang boxes Six, single gang boxes, 3-1/2" (89 mm) deep minimum, RACO # 600 or equal (supplied by others) Box selection note Conduit entrance is box dependent, refer to additional mounting information on page 4 and Installation Instructions 574-188 2975-9217, Surface Mount Box Option** (ordered separately) Dimensions 12" Wx4-5/8" H x 1-3/4" D (305 mm x 117 mm x 44 mm) Finish J Painted steel, ivory finish * Refer to control panel data sheets S4010-0001, S4006-0001, and S4008-0001 for additional information. ** Reference Wiremold box number V5748-6. S4606-0001-5 2/2006 rirrnrnii rn(.] Flush Mount Ganged Boxes: Use 6-gang box, 3-1/2 (89 mm) mm. depth, RACO # 590 using knockouts 2-1/2" from front, or RACO # 600 using side knockouts or rear cable . . clamps, or equal (supplied by others) IIIl , EILID LTE Flush Mount Masonry Box: Use 6-gang box, RACO # 960, 2-1/2" deep (64 mm) using top or bottom knockouts, or - - - RACO # 965, 3-1/2" (89 mm) deep, using knockouts 2-1/2" from front, or equal (supplied by others) - Surface Mount Box: ° 0 ° ° ° Simplex model 2975-9217 (ordered separately) Trim plate -Ff--' o Terminal block access at rear of enclosure, this side Annunciator Assembly NOTE: Enclosure extension into box is low x 2-5/8" H x 1-5/16" D, 1-1/2" deep at terminal block access, offset to left (254 mm x 67 mm x 33 mm, 38 mm), select conduit entry accordingly. I'iAI flT1 Interconnection Wiring Notes: Communications require a single 18 AWG twisted, shielded pair. Power requires two, 18 to 12 AWG wires for 24 VDC system power, plus Earth Ground to each electrical box. Refer to the installation instructions supplied with the compatible ii$llllilIIllhllIiiiitlliiiiiiiIIIIIIflhiiDuitIlIIiII control panel for additional information I L . 4606-9101 LCD Annunciators IIIIUIIIIIIIIIIIIIIIIIIIIHtII IIIIIIIIIIIIIllhIIllhIIIIIIII 4010/4006/4008 Fire Alarm Control Panel (4010 shown for reference) Tyco, Simplex, and the Simplex logo are trademarks of Tyco International Services AG or its affiliates in the U.S. and/or other countries. Wiremold is a trademark of The Wiremold Company. .Simplex Tyco Safety Products Westminster• Westminster, MA • 01441-0001 - USA S4606-0001-5 2/2006 www.tycosafetyproducts-usa-wm.com 0 2006 Tyco Safety Products Westminster. All rights reserved. All specifications and other information shown were current as ofdocument revision date and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7120-0026:225 Page 1 of 1 CATEGORY: Annunciators LISTEE: Simplex, 100 Simplex Drive, Westminster, MA 01441-0001 Contact: Paul Mattern (978) 731-8542 *FAX (978) 731-8881 DESIGN: Models 4606-9101 emote LCD annunciator and 4605-8401 24 point I/O module. Refer to listees prin e data sheet for additional detailed product description and operational considerations. RATING: 24VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, product number, electrical rating and UL label. APPROVAL: Listed as annunciator and accessory for use with Simplex's separately listed fire alarm control units. *Rece 03-29-2006jew This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or .• recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 5, 2007 Listing Expires June 30, 2008 Authorized By: MIKE TANAKA, Senior Deputy State Fire Marshal Program Manager tLJC0 IF/re & /5implexGrinnell I Security I SimplexGrinnell LP 3568 Ruffin Road, South San Diego, CA 92123-2597 Tele: (858) 633-9100 Fax: (858) 633-9101 www.simplexgrinnell.com License Number: 802591 Extract Date: 12/27/2007 Business SIMPLEX GRINNELL L P Information: 900 ALLEN AVENUE GLENDALE, CA 91201 Business Phone Number: (561) 988-3755 Entity: Partnership Issue Date: 12/28/2001 Expire Date: 12/31/2009 License Status: This license is current and active. All information below should be reviewed. Classifications: C10 ELECTRICAL C16 FIRE PROTECTION CONTRACTOR Bonding: This license filed Contractor's Bond number 81880913 in the amount of $12,500 with the bonding company: FEDERAL INSURANCE COMPANY. Effective Date: 01/01/2007 This license filed Bond of Qualifying Individual number 82056155 for KARIM MAZHAR in the amount of $12,500 with the bonding company FEDERAL INSURANCE COMPANY. Effective Date: 01/01/2007 This license filed Bond of Qualifying Individual number 81880915 for RONALD GILBERT MAYLE in the amount of $12,500 with the bonding company FEDERAL INSURANCE COMPANY. Effective Date: 01/01/2007 Workers This license has workers compensation insurance with the Compensation: AMERICAN HOME ASSURANCE COMPANY Policy Number: WC1616576 Effective Date: 06/29/2007 Expire Date: 06/29/2008 Miscellaneous DESCRIPTION Information: 10/28/2005 ASB CERTIFICATION REMOVED Personnel listed on this license (current or disassociated) are listed on other licenses. Simp!exGrinne!I LP 3568 Ruffin Road, South fl San Diego, CA 92123-2597 tqccil Frei & /SimplexGrinne Tele: (858) 633-9100 Security Fax: (858) 633-9101 www.simplexgrinnell.com SIMPLEXGRINNELL WARRANTY WARRANTY & DAMAGES: SimplexGrinneH hereby warranties for one (1) year from the date of beneficial use or eighteen (18) months from date of delivery to the purchaser to replace, or at its option, to repair any equipment or parts thereof which are found to be defective in material or workmanship. This warranty is made to the purchaser of this equipment and is in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability of fitness for a particular purpose. SimplexGrinnell shall not be liable for any direct, incidental or consequential loss of damage to the purchaser or user of this equipment arising out of the failure of the equipment to operate in excess of the purchase price of said equipment. WARRANTY SERVICE HOURS: - 8:00AM TO 5:00PM, MONDAY THROUGH FRIDAY, EXCLUDING LOCALLY OBSERVED SIMPLEX HOLIDAYS. - OFF HOURS RESPONSE IS AVAILABLE AT EXTRA COST.