HomeMy WebLinkAbout5858 DRYDEN PL; ; FA140016; Permit11/15/24, 11:07AM FA140016 Permit Data
City of Carlsbad
Fire Alarm Permit
Job Address: 5858 DRYDEN PL
Permit Type: FALARM
Parcel No: 2120910600
Lot #: 0
Reference No.:
Permit No: FA140016
Status: ISSUED
Applied 4/15/2014
Approved: 4/23/2014
Issued: 4/23/2014
PC #: Inspector:
Project Title: SUNROAD INTL FLORAL CENTER NEW FIRE ALARM PANEL
THAT MONITORS EXISTING WATER FLOW TAMPERS., INSTALL
NEW SMOKE DETECTOR ABOVE FACP, INSTALL NEW DUCT
SMOKE DETECTORS AND RELAY MODULES. INSTALL ONE
HORN/STROBE IN A NORMALLY OCCUPIED AREA. SYSTEM TO
BE AUTOMATIC (SPRINKLER MONITORING AND SMOKE
DETECTOR) FIRE ALARM SYSTEM IS MONITORED BY
CENTRAL STATION.
Applicant:
M & B ELECTRIC INC.
14460 KENTFIiELD
POWAY, CA
Owner:
SUNROAD RESEARCH CENTER
PARTNERS L P
C/O SUNROAD ENTERPRISES
4445 EASTGATE MALL #400
SAN DIEGO CA
Fees ($) Add'I Fees ($) Total ($) Balance ($)
396 0 396 0
about:blank 1/1
FUNDAMENTALS OF FIRE ALARM SYSTEMS IA t+(X ((7 72-Si
FIRE ALARM SYSTEM
RECORD OF COMPLETION
Name of protected property: £(44!OAi)
Address: nuocw Oft 04AZAD CA. 1'1,00t
Representative of protected property (nameiphone):
Authority having jurisdiction: O4J1A AM fULL It'7-
Address/telephone number: .S(P (5440Th) (LAI (AU)IAI) (4 Ci) UeQ3l
Organization name /phone Representative name /phone
Installer Chi,tv*i7 ciQ-*'' s%c
Supplier
Service organization IA tA
Location of record (as-built) drawings: IAtP 112A S /.
Location of operation and maintenance manuals:
Location of test reports: I'
A contract for test and inspection in accordance with NFPA standard(s)
Contract No(s): ________________ Effective date: 4 h' N Expiration date: ItS
System Software
Operating system (executive) software revision level(s):
Site-specific software revision date:
Revision completed by:
(name) (firm)
1.Type(s) of System or Service
____NFPA 72, Chapter 6— Local
If alarm is transmitted to location(s) off premises, list where received:____________________________
____NFPA 72, Chapter 8— Remote Station
Telephone numbers of the organization receiving alarm:
Alarm:
Supervisory
Trouble:
If alarms are retransmitted to public fire service communications centers or others, indicate location and telephone
numbers of the organization receiving alarm:
Indicate how alarm is retransmitted:
NFPA 72, Chapter 8— Proprietary
Telephone numbers of the organization receiving alarm:
Alarm:
Supervisory:
Trouble:
If alarms are retransmitted to public fire service communications centers or others, indicate location and telephone
numbers of the organization receiving alarm:
Indicate how alarm is retransmitted:
____NFPA 72, Chapter 8— Central Station
Prime contractor:
Central station location: k41
(NFRA 72, lot 4)
FIGURE 4.5.2.1 Record of Completion.
2002 Edeon
72-32 NATIONAL FIRE ALARM CODE
Means of transmission of signals from the protected premises to the central station:
McCulioh ____Multiplex One-way radio
f Digital alarm communicator Two-way radio '7 Others
Means of transmission of alarms to the public fire service communications center:
System location:
NFPA 72, Chapter 9—Auxiliary
Indicate type of connection: _______ Local energy Shunt _____Parallel telephone
Location of telephone number for receipt of signals: -
Record of System Installation
(Fill out after installation is complete and wiring is checked for opens, shorts, ground faults, and improper branching,
but prior to conducting operational acceptance tests.)
This system has been installed in accordance with the NFPA standards as shown below, was inspected by
1' 0' 'k-4f)it on 1 '4 ,includes the devices shown
in 5 and 6, and has been in service since 1 44 I q
NFPA 72, Chapters 1 2 3 4 5 6 () 8 9 10 11 (circle all that apply)
—)C NFPA 70, National Electrical Code, Article 760
._Manufacturer's instructions
Other (specify):
Signed: Date:
Organization:
Record of System Operation
Documentation in accordance with Inspection Testing Form, Figure 10.6.2.3, is attached
All operational features and fi.mctions of this system were tested by date
and found to be operating properly in accordance with the requirements of:
__NFPA 72, Chapters 1 2 3 4 5 6 7 8 9 (j 11 (circle all that apply)
LNFPA 70, National Electrical Code, Article 760
Manufacturer's instructions
Other (specify):
Signed: Date: L1..cLIL(
Organization: Mt-6 -
Signaling Line Circuits
Quantity and class of signaling line circuits connected to system (see NFPA 72, Table 6.6.1):
Quantity: - Style:________________ Class: 15
(NFPA 72,2 of 4)
FIGURE 4.52.1 Continued
2002 Edition
FUNDAMENTALS OF FIRE Al ARM WSTIMS eq
5. Alarm-initiating Devices and Circuits
Quantity and class of initiating device circuits ( NFPA 72, TaMe 6.5): Quantity: 2t Style: Class:
MANUAL
(a) Manual stations Noneoded______ itters______ Coded_______ Addressable (b) Combination manual fire alarm and guard's tour coded stations
AUTOMATIC
Coverage: Complete
Selective Nonrequired
(a) Smoke detectors Ion ________ Photo_______ Addressable I (b) Duct detectors Ion Photo Addressable l_ (C) Heat detectors_______ F1' RE F]YRR RC_____ Addressable_____ Sprinkler waterfiow indicators: Transmitters_____ Noncoded_____ Code
d
_
_
_
_
_
A
d
d
r
e
s
s
a
b
l
e
2
The alarm verification feature is disabled Kor enabled changed from ____seconds to____ seconds. Other (list):
6. Supervisory Signal-Initiating Devices and Circuits (use blanks to indicate q
u
a
n
t
i
t
y
o
f
d
e
v
i
c
e
s
)
GUARIYS TOUR
(a)Coded stations
(b)_._Noncoded stations
(c) __Compulsory guards tour system comprised of_transmitter stations and intermediate stations Note: Combination devices are recorded wider 5(b), Manual, and 6(a), Guard's Tour
SPRINKLER SYSTEM
Check if provided
(a)--Valve supervisory switches
(b)-Building temperature points
(c) _Site water temperature points
(d)_._ Site water supply level points
Electric fire pump:
(e) _re pump power
(F) _Fire pump running
(g)-Phase reversal
Engine-driven fire pump:
(h)_Selector in auto position
_Engine or control panel trouble
___ The pump running
ENGINE-DRIVEN GENERATOR-
Selector in auto position
Control panel trouble
(c) -Transfer switches
(d) -Engine running
Other supervisOrY function(s) (specify):
(NFRA 72,3 of 4)
FIGURE 4.5.2.1 Confin-ed
2002 Edition
S *
72-34 NATIONAL FIRE ALARM CODE
7. Annunciator(s)
Number. Type: Location: &I (W *Vkl $4k1
8. Alarm Notification Appliances and Circuits
NFPA 72, Chapter 6— Emergency Voice/Alarm Service
Quantity of voiceIalarm channels: Single: Multiple:
Quantity of speakers installed: Quantity of speaker zones:________________________
Quantity of telephones or telephone jacks included in system:
Quantity and the class of notification appliance circuits connected to system (see NFPA 72, Table 6.7):
Quantity: I Style:_________ Class:___________________________________
Types and quantities of notification appliances installed:
Bells With Visible________________
Speakers_________________ With Visible_____________________
(e) Horns—I With Visible I
Chimes With Visible_______________
Other With Visible_________________
Visible appliances without audible:_______________________________________________________
9. System Power Supplies
Fire Alarm Control Panel: Nonimal voltage: _t 0
Overcurrent protection: pe: _C4 .QlZkP,4L
Current rating: I 5fr'4P
Current rating: I c
Location: _t4X€1C_4i
Secondary (standby):
Storage battery:QI Amp-hour rating-
Calculated capacity to drive system, in hours:
Engine-driven generator dedicated to fire alarm system:
Location of fuel storage:
Emergency system used as backup to primary power supply:
Emergency system described in NFPA 70, Article 700:
10. Comments
Frequency of routine tests and inspections, if other than in accordance with the referenced NFPA standard(s):
System deviations from the referenced NFPA standard(s) are:________________________________
(signed) Ilatton contractor/supplier (title) (data)
(signed) for alarm service company (title) (date)
(signed) for central station (title) (date)
by the authority having jurisdiction): U4 completion oWthe m(s) satisfactory test(s) witnessed (if required
lj *(signed) reqresefflativ uthority having jurisdiction ( ) (date)
1 (IVFPA2,4of4)
I FIGURE 4.5.2-1 Conthtued
2002 r=dilion
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No.
CATEGORY:
LISTEE:
DESIGN:
RATING:
INSTALLATION:
MARKING:
APPROVAL:
XLF:
242-0559: 0ij Page 1 of 1
242 -- DUCT SMOKE)DETECTOR, PHOTO. (W/ OR W/O BASE)
SILENT KNIGHT SECUR1TY7559)Meridian Circle, Maple Grove, MN 55369-4927
Contact: Michael Mclsaac (763) 493-6400 Fax (763) 391-5464
Email: mike.mcisaac@honeywell.com
(odels SKDUCT* analog photoelectric duct smoke detector housings.)The units consist of
a duct detector housing, exhaust tubes, and separately listed compatible detector head
Refer to listee's data sheet fOr additional detailed product description and operational
considerations.
oz, IY1Rif
In accordance with listee's printed installation instruction, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
Listee's name, model number, rating, air velocity and UL label.
Listed as conventional photoelectric duct smoke detector housing for use with separately
listed fire alarm control units. Refer to listee's Installation Instruction Manual for details.
3242-1653:0209
*Rev. 07-14-09 fm
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
1 igxpires (June 30, 2014)
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM IL
LISTING SERVICE
LISTING No. 7300-1273:0140 Page 1 of I
CATEGORY: 7300-- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES
LISTEE: Security Controls95 BtidglandAve, Toronto, Ontario M6AIY7 Canada
Contact: Dan Nita (905) 760-3000 Fax (905) 760-3020
Email: dnita@dsc.com
DESIGN: (el 3G3070-CFRF(communicator)(GSM-GPRS or 3G/HSPA network) signaling device. It
is intended for use as a standalone communication technology((standalone unit). It may also
be used as a backup communication technology in conjunction with a DACT. It is used for
central station fire and burglar alarm system communication, which employs a GSM-GPRS
or 3G/HSPA (cellular) communication as its signaling medium. This product is to be
connected to a listed control panel in accordance with the installation instructions provided
with the Model 3G3070-CF transceiver.
A Motorola radio, Model H24, connects to an interface board, Model UA595, to form a Model
3G3070-CF communicator, which is intended to be installed at each protected premise. The
Model 3G3070-CF is housed in its own metal enclosure and can connect to any separately
listed control unit through a telephone line connection or using its inputs connected to dry
contacts outputs from the fire alarm control panel for alarm, supervisory, or trouble
transmissions.
Refer to listee's data sheet for additional detailed product description and operational
considerations.
RATING: 120 V, 50/60 Hz, 0.3 A
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listees name, model number, electrical rating, and UL label.
APPROVAL: Listed as communicator signaling device for use with a separately listed fire alarm control
unit. Refer to listee's Installation Instruction Manual for details.
02-09-12 gt
I
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 (Listing ExpJ (June 30, 2014)
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
(!TING No.)
CATEGORY:
LISTEE:
DESIGN:
RATING:
INSTALLATION:
MARKING:
APPROVAL:
XLF:
(73-0559:61553 Page 1 of 1
(3O0 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES
{ILENT KNIGHT SECURITY7550 Meridian Circle, Maple Grove, MN 55369-4927
Contact: Michael Mclsaac (763) 493-6400 Fax (763) 391-5464
Email: mike.mcisaac@honeywell.com
ldeIs IDP-Relay-6, SK-Relay-6,relay module, lDP-Control-6, SK -Control-6, supervising
control module, lDP-Monitor-10, SK-Mon-10, input monitor module. lDP-Zone-6. SK-Zone-6
SK-Zone monitor module, lDP-Control, lOP-Relay, SK-Control, 5K-Relay, control modules,
lDP-Monitor-2, SK-Monitor-2, dual monitor modules,and *IDPRELAYMON..2
*SK..RELAYMON..2 with 2 input/2 output relay modules. All devices are intended to be
connected between the signaling line circuit of a compatible fire alarm control panel. Refer to
listee's data sheet for additional detailed product description and operational considerations.
16-33 VDC Primary
In accordance with listee's printed installation instructions, applicable codes & ordinances
and in manner acceptable to the authority having jurisdiction.
Listee's name, product number and UL label.
Listed as control unit accessories for use with listee's separately listed compatible fire alarm
control units.
If an external power supply is used for Model SK-Zone-6 and lDP-Zone-6, the negative of the
external power supply is referenced to the negative of the auxiliary supply of the compatible
control panel. This is done in order to detect ground faults on the initiating circuit.
7300-0028:0219
*Rev. 10-25-11 mt
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 Listing Expires)ie 30,2014)
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. (300-0559:01 55 Page 1 of 1
CATEGORY: (7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES1MISC. DEVICES
LISTEE: (SILENT KNIGHT SECURITY7550 Meridian Circle, Maple Grove, MN 55369-42
(Contact: Michael Mclsaac)(763) 493-6400 Fax (763) 391-5464
Email: mike.mcisaac@honeywell.com
DESIGN: LMode! IDP-Relay-6, SK-Relay-6, dule,lDP-Control-6, §K -Control-6, supervisingj
control module, lDP-Monitor-10, SK-Mon-10, input monitor module, IDP-Zone-6, SK-Zone-6
six zone interface module, lDP-Monitor, IDP-Minimon, lOP-Zone, SK-Monitor, SK-Minimon,
SK-Zone monitor modules, lDP-Control, IDP-Relay, SK-Control, SK-Relay, control modules,
IDP-Monitor-2, SK-Monitor-2, dual monitor modulesand *IDP.RELAYMON..2
*SK..RELAYMON..2 with 2 input/2 output relay modules. All devices are intended to be
connected between the signaling line circuit of a compatible fire alarm control panel. Refer to
listee's data sheet for additional detailed product description and operational considerations.
RATING: 16-33 VDC Primary
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances
and in manner acceptable to the authority having jurisdiction.
MARKING: Listees name, product number and UL label.
APPROVAL: Listed as control unit accessories for use with listee's separately listed compatible fire alarm
control units.
NOTE: If an external power supply is used for Model SK-Zone-6 and lDP-Zone-6, the negative of the
external power supply is referenced to the negative of the auxiliary supply of the compatible
control panel. This is done in order to detect ground faults on the initiating circuit.
XLF: 7300-0028:0219
*Rev. 10-25-11 mt
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 pJj (June 30, 2014)
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
ILISTING No.)
CATEGORY:
LISTEE:
DESIGN:
INSTALLATION
MARKING:
APPROVAL:
XLF:
(fl50-0559:0161) Page 1 of 1
(7150-- FIRE ALARM PULL BOXES1
(SILENT KNIGHT SECURIT77550 Meridian Circle, Maple Grove, MN 55369-4927
Contact: Michael Mclsaac (763) 493-6400 Fax (763) 391-5464
Email: mike.mcisaac@honeywell.com
LMode! SK-PULL-SA'nd SK-PULL-DA single/dual ation fire alarm pull boxes. Refer to
listee's data sheet for detailed product description and operationalconsiderations.
In accordance with listee's printed installation instructions, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
Listees name, model number, rating, and UL label.
Listed as fire alarm pull boxes for use with separately listed compatible fire alarm control
units. Refer to listee's Installation Instruction Manual for details.
* These manual pull boxes meet the requirements of UL Standard 38, 1999 Edition with
California amendments.
7150-0028:0199
04-16-09
W. This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 (Liiipjqs (June 30, 2014)
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL -
FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. (272-0559:01J Page 1 of 1
CATEGORY: (7 -- SMOKE DETECTOR -SYSTETYPE-PHOTO ELECTRIC)
LISTEE: (SILENT KNIGHT SECURITY7550 Meridian Circle, Maple Grove, MN 55369-49j
[Contact: Michael Mclsaac)(763) 493-6400 Fax (763) 391-5464
Email: mike.mcisaac@honeywell.com
DESIGN: Models IDP-PHOTO, lDPPHOTOR*, IDP-PHOTO-T, lDP-ACCLIMATE, SK-PHOTO)
SK4HOTOR*, SK-PHOTOT and SK-ACCLI MATE photoelectric type smoke detectors.
Model IDP-PHOTO-T employs a 1350F supplement integral heat sensor which only assists
in a fire situation. This thermal circuitry is NOT approved for use in lieu of a required heat
detector. Refer to listee's data sheet for additional detailed product description and
operational considerations.
RATING: 24 VDC
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances
and in manner acceptable to the authority having jurisdiction.
MARKING: Listees name, product number, electrical rating and UL label.
APPROVAL: Listed as photoelectric type smoke detector for use with listee's separately listed compatible
fire alarm control units and bases. All models are suitable for open areas and inside duct
installations with air velocities between 0-4000 FPM. Models IDP- PHOTO and IDP-PHOTOR
are approved for installations inside System sensor duct housing DNR (OSFM Listing No.
3242-1653:209) and DNRW(OSFM Listing No. 32421653:210)*. Models SK-PHOTO and
SK-PHOTOR are approved for installations inside Silent Knight SK-DUCT (OSFM Listing No.
3242-0559:162) and System Sensor DNRW(OSFM Listing No. 32421653:210)*
NOTE: The photoelectric type detectors are generally more effeôtive at detecting slow, smoldering
fires that smolder for hours before bursting into flame. Sources of these fires may include
cigarettes burning in couches or bedding. The ionization type detectors are generally more
effective at detecting fast, flaming fires that consume combustible materials rapidly and
spread quickly. Sources of these fires may include paper burning in a waste container or a
grease fire in the kitchen.
XLF: 7272-0028:0206
*Rev. 02-01-10fm
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 ngjir (June 3O,2014)
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. (75-0559:0142j Page 1 of 2
CATEGORY: 7165 -- FIRE ALARM CONTROL UNIT (COMMERCIAL)
LISTEE: LSILENT KNIGHT SECURlTY755)Meridian Circle, Maple Grove, MN 55369-4927
Contact: Michael Mclsaac (763) 493-6400 Fax (763) 391-5464
Email: mike.mcisaac@honeywell.com
DESIGN: (dels *5808 j*IFp1001Fire Alarm Control Units! Power limited, automatic, manual, local,
remote station, central station, waterflow, water releasing and sprinkler supervisory service.
Refer to listee's data sheet for additional detailed product description and operational
considerations. System components:
(,,jFP-100 (Control Units)
*01 FP-100BD Motherboard
7628 EOL Resistor
I586ORIRA-1000 Inciator)
*01 FP 100-IA I FP100 User Interface
*058631 5808 User Interface
5496 Power Module
5824 Serial/Parallel Interface
RPS-1000 Power Expander/Supply
5865-3/5965-4 LED Annunciator
5880 LED 10 Module
5883 Relay Interface Board
SD500-ANM Addressable Notification Module
SD500-LIM Line Isolation Module
SD505-61B Isolation Base
SD-500 SDM Smoke Detector Module
RA-1 00 Remote Annunciator
3158 Reverse Polarity Module
5220 Direct Connect Module
*122740 *122723E Enclosures
RATING: 120 VAC Primary, 24 VDC Secondary
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listees name, model number, electrical rating, and UL label.
APPROVAL: These control units can generate a distinctive three-pulse Temporal Pattern Fire Alar
(Evacuation Signal (for total evacuation) in accordance with NFPA 72. 2002 Editions
Rev. 10-3-08 ma
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 Listing Expires 30, 2014]
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division
Listing No. 75-0559:014
(age 2
This control unit meets the requirements of UL-864, 9th Edition Standards.
NOTE For Fire Alarm Verification Feature (delay of fire alarm signal), the maximum
Retard/Reset/Restart period shall not exceed 30 seconds.
Rev. 10-3-08 ma
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2013 Listing Expires (June 30, 2014)
Authorized By: JAMES PARSEGIAN, Program Coordinator
Fire Engineering Division