The URL can be used to link to this page

Home My WebLink About2231 RUTHERFORD RD; ; AS030246; Permit5/22/25, 10:04 AM AS030246 Permit Data City of Carlsbad Sprinkler Permit 2231 RUTHERFORD Job Address: RD Permit Type: SPRINK Parcel No: 2120701900 Permit No: AS030246 Status: ISSUED Applied 12/23/2003 Approved: 1/5/2004 Lot #: 0 Reference No.: Issued: 1/5/2004 PC #: Inspector: Project Title: CARLSBAD COURTYARD OH AS PLAN CHECK & INSPECTIONS Applicant: SCHMIDT FIRE PROTECTION CO INC 4760 MURPHY CANYON RD SAN DIEGO, CA 92123 858-279-6122 Owner: BECKMAN/CARLSBAD I L L C C/O COVEY COMMERCIAL 6183 PASEO DEL NORTE #280 CARLSBAD CA Fees ($) Add'I Fees ($) Total ($) Balance ($) 100 0 100 0 about:blarik 1/1 4. TECHNICAL DATA LISTINGS AND APPROVALS Refer to the approval chart on page 41 b. Glass-bulb fluid temperature rated to -65 'F (-55 'C). Minimum operating pressure: 7 psi (48,3 kPa). Rated Water Working Pressure: Sprinkler Bass Part Nos. 066628, 067188, and 069328 are rated for use with water working pres- sures ranging from the minimum 7 pal (48,3 kPa) up to 250 psi (1 724 kPa) for high-pressure sys- tems. High-pressure (HP) sprin- klers can be identified by locat- ing the number "250" on the de- flector. / All Other Part Nos: Maximum 175 pal (1 207 kPa) wwp. Factory tested hydrostatically to 500 psi (3 448 kPa). Spring: U.S.A. Patent No. 4.167,974 : •:QCjch.12000 Sprinkler 41 a NJ1K1 MKROFAST®ANDMicrofasU-IP 4 - QUICK RESFOISE PENDENT SPRINKLERS Bulb: U.S.A. Patent No. 4,796,710 Testing: U.S.A. Patent No. 4,831,870 Minimum operating pressure: 7 psi (48.3 kPa) SPRINKLER MATERIALS Frame: Brass Castings UNS-C84400 Deflector Brass UNS-C26000 Bushing (for High-Pressure Sprinklers): Brass. UNS-C36000 Bulb: Glass, nominal 3 mm diameter Seal: TefionO Tape Spring: Nickel Alloy Screw: Brass UNS-C36000 Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-S30400 Sprinklers with Polyester Coating or Poly Finish Spring: Nickel Alloy, exposed Screw: Brass UNS-C36000 Nickel plated. Pip Cap and insert Assembly: Copper UNS-CI1000 and Stainless Steel UNS-S30400 Sprinklers with Teftonia Coating Spring: Nickel Alloy, exposed Screw: Brass UNS-C36000 Nickel plated. Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-S30400, Teflon* Coated AVAILABLE FINISHES Brass, Bright Brass, Chroine.Enloye (patents pending), White Polyester (White Poly finish for P/N 06562B only), Navajo White Polyester, Black Polyes- ter (Black Poly finish for Pft4 06662B only), and Black Teflon5 ACCESSORIES Sprinkler Cabinets: Six-head capacity: Part No. 01724A Twelve-head capacity Part No. 01725A Available since 1971. Sprinkler Wrenches: Standard Wrench: Part No. 10896W/B (avaable since 2000) or 05000CW/B (no longer avail- able). Wrench for coated and recessed Viking MicrofastHP5 Sprinklers: Part No. 07398W' A 1/2" ratchet is required (rot available through Viking). Refer to the "SPRINKLER ACCES- SORIES" section of the Viking Engi- neering and Design Data book. 1. PRODUCT .NAME fVlklng Microfast and ..- .. MicrofastHP Mod MQuik ReonsePendent -Sprinklers,-* 2 . MANUFACTURER The Viking Corporation 210 N. Industrial Park Road Hastings, Michigan 49058 U.S.A. Telephone: (616) 945-9501 (877) 384-5464 Fax: (616) 945-9599 e-mail: techsvcs@vikingcorp.com 3. PRODUCT DESCRIPTION Viking Microfast and MicrofastHP Quick Response Pendent Sprinklers are small, thermosensitive spray sprin- klers available with several finishes, temperature ratings, and orifice sizes to meet design requirements. The special Polyester finishes and TeflonO coatings can be used in decorative applications where colors are desired. In addition, these two finishes are corrosion resis- tant and provide protection against many corrosive environments. The pip-cap and sealing assembly of the sprinkler Is held in place by a rugged 3 mm glass bulb. During fire conditions, when the temperature around the sprin- kler reaches its operating temperature, the heat-sensitive liquid in the glass bulb expands, causing the bulb to shatter, re- leasing the pip-cap and sealing spring assembly. Water flowing through the sprinkler orifice strikes the sprinkler de- flector, forming a uniform spray pattern to extinguish or control the fire. Sprinkler Nominal Sprinkler Ceiling Temperature at Sprinkler Bulb Max. Ambient Max. Recommended Temperature Temperature Rating Color Classification PoInt) -. _(Fusing Temp. Allowed' Ambient Temo.2 Ordinary 135 'F (57 'C) 115 OF (46 °C) 100 'F (38 'Cl Oranae Ordinary 155 'F (66 'C) 135 'F (57 'C) 100°F (38 'C) Red Intermediate 175°F 179 'C) 155 'F (68 'C) 1 150°F (65 'C) Yellow Intermediate 200 'F (93 'C) 1 180 'F (82 'C) 1 150 'F (65 "CI Green Hioh 1 286'F(141'CI 1266'F(130°C) 1 225'F(107'C) Blue Sprinkler FInishes: Brass, Bright Brass, Chrome.Enloye (patents pending), White Polyes- ter (White Poly finish for PIN 06662B only), Navajo White Polyester, Black Polyester (Black Poly finish for P/N 06662B only, and Black Teflon Corrosion-Resistant Coatings : White Polyester (White Poly finish for P/N 066628 only), Navajo White Polyester, Black Polyester (Black Poly finish for P/N 06662B only), and Black Teflon Footnotes Based on National Fire Prevention and Control Administration Contract No. 7-34860. 2 Based on NFPA-13. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the Authority Having Jurisdiction. Refer to specific installation standards. 3The corrosion-resistant coatings have passed standard corrosion tests required by particu- lar approving agencies. Refer to the approval chart on page 41 b. These tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are compatible with or suitable for the proposed environment. The coatings indicated are applied to the exposed exterior surfaces only. NOTE: The spring is exposed on sprinklers with Teflone Coating, Polyester Coating, or Poly finishes, Note: Units of measure in parentheses New format replaces page 41 a-d and page 51 a-d, dated may be approximations. February 17, 2000. Refer to technical data page QR1-2 Form No. F081296 for care, installation, and maintenance information. Sprrkler41 b October 1, 2000 M%CROFAS1e AND MicrofastHP4 III(iIs1G A /A QUICK RESPONSE I PENDENT SPRINKLERS] .pprvai Chart Temperature KEY I I Mlcrofast and MicrofastHP Finish Quick Response Pendant Sprinklers5 Al X4—Escutcheon (if applicable) Maximum 175 PSI WWP Standard Orifice Thre?d Size I Sprinkler Description I Nom1nl K-Factor iOV.rstl Lmlgthl Ustinas and Approvals2 NPT I BSP I Base Part No.1 IdentificationI 12 thS.'2 metrics I Inches I mm UL ULC LY FM' NYC3 VdS I LPCB 1/2" 115 mml 06662B VK302 1 I _q 6 I 2.3 I A2X. B2Y I A2X. B3Y . B4Y I A2X B2Y I Cl I Al Large r - 2.9 I 74 A2X I 3/4" 20 mmt 06666R Wag 1 Ø I 11.5 2.4 61 A2X .ft2Y A3X [ BIY A2X_ " : I : 1/2" I - I 06765B I VK352 I 8.0 I A3X I - A2X Small Orifice5 1/2" 115 mm1 067l8B I VK329 2.$ 3,9 I 2.7 I-1212_1 A2X A2X. H2Y A2X - I - I 08720 VK331 4.2 - 2.7 II I I - : q - ha mml 06932B I VK329 - I 58 I A2X.2.3 - - - Maximum 250 PSI WWP Standard Orifice Thread Size I Deecriptian !NomlnI K.FectarlOverali LngthI Listings2 NPT BSP Base Part No.1 ndor No 12 u,12 I me1r1c I inches I mm UL ULC NYC" ~Vdl& LPCB 1/2' 115mm1 068628 I VK302 I 5.8 7,9 I 2.3 I 58 I A2X I A2X.62Y I - A2X SneII Orifice! 1/2" mmi V329 2.8 0671 AB' 3.9 2.7 f 5.8 1 2.3 I 69 I A2X A2X. 92Y : I-.2)1 - ISO mmi 069326 VK329 1 - I 58 I - - Approved Temperature Approved Finishes ii - Brass and Chrome-Enio Approved Escutcheons Ratings 2- Brass Brlojit Brass, a -EnkWhite (WhflG IX- Standard surface-mounted escutcheon or the I Viking Microfas Model F-I AdjustableEs- A- 135 "F (57 "C), 155"F(681 "C),175"F(79"C),200"Fh Poly fInish'for PIN 06662BonIy)Nava10 White Polyester7 I Black P2 (Black Poty tiflich fOf P114066628 only). I Black T' - Standard surface-mounted escutcheon or "C), "F (93 and 288 (141"C) B - 135 "F ( "C) 155 "F (681 13-Brass, Bright Brass, Chro me- Enloye White Polyester White Poly finish7 for P/N 06662B only) NavajpWhiteI I the Viking Mlcrofast° Model F-i Adjustable tcheon'° or recessed with the yin9 Recessed Eeieon ,rnaticM&ieiE-1 "C) 175 F (79 "'C), and 200 I oIyester, and Black Polyester (Black Poly finish for PIN I z - Standard surface-mounted escutcheon or the "F 93 "C) C - 155 "F (68 "C) I 0 6662B only) 14 - Brass, Chrome.Enloy, White Poly finish7, and Black I Poly finish7 Viking Microtast Model F-i Adjustable Es- cutcheon10, or recessed Base part number is shown. For complete part number, refer to Viking's current price schedule. 2Th1s table shows the listings and approvals available at the time of printing. Other approvals may be In process. Check with the manufacturer for any additional approvals. Accepted for use City of New York Board of Standards and Appeals, Calendar Number 219-76-SA. The sprinkler orifice is bushed. Refer to the 'Sprinkler Accessories" section of the Viking Engineering and Design Data book for technical data on approved escutcheons and other accessories. UL, ULC, and C-UL Ustlngs and NYC Approvals limited to Light-Hazard Occupancies with hydraulically calculated wet systems. UL, ULC and C-UL Usted and NYC Approved as corrosion resistant. Metric K-actor shown Is for use when pressure is measured in kPa. When pressure is measured In BAR, multiply the metric K-Factor shown by 10.0. FM Approved for use In wet-pipe sprinkler systems (or preaction systems qualifying as wet systems) for protection of occupancies described in the Factory Mutual and Research Loss Prevention bate Sheets and 10The Viking Microfas odel F-i Adjustable Escutcheon isc not aflow the fusible ele- ~n~neering ment ofthe sprinkletbe recessed behind the face ofthe"Accelted foruse,Cy f New York Department of Buildings, MEA 89-92-E, Vol XVI. '2 Sprinkler l.D. Nos. and nominal U.S. K-factors provided in accordance with the 1999 edition of NFPA 13, Section 3-2.2 and Section 3-2.3. Ceiling Opening Size: 2-5/16' (58,7 mm) Minimum, 2-1/2" (63,5 mm) Maximum. 2-1/8" 2-1/8" mm) (54 mm) -. Tn I _ 1-3/4" II II 1 . (44,45 mm) 2-1/8" I1 11 -3/8"(34.9 mm) 1-3/4" r (25,4 mm) (54 • mm) 1' Minimum (44,5 m Minimum Maximum .. - - L. Maywmc_I. Quick Response Pendent Sprinkler Quick Response Pendent Sprinkler Installed Quick Response Pendent Sprinkler Installed with a Standard 1/8" with the Viking Microfast® Model F-i Installed with the Vikirig-Micromatic® (3,1 mm) Surface-Mounted Escutcheon Adjustable Escutcheon Model E-1 Recessed Escutcheon New format replaces page 41 a-d and page 51 a-d, dated February 17, 2000. Refer to technical data page QR1 -2 for care, installation, and maintenance information. Form No. F_081296