Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2737 MADISON ST; ; FA100001; Permit
5/30/25, 3:17 PM FA1 00001 Permit Data City of Carlsbad Fire Alarm Permit Permit No: FAI 00001 Job Address: 2737 MADISON ST Status: ISSUED Permit Type: FALARM Applied 1/13/2010 Parcel No: 2031021600 Approved: 1/13/2010 Lot #: 0 Reference No.: Issued: 1/13/2010 PC #: Inspector: Project Title: BRUCE BAKER TOWN HOMES TWO FIRE ALARM INSPECTIONS @ $65/EA Applicant: BAY ALARM COMPANY UN IT A 1000 HOWELL ST ANAHEIM, CA 714-926-6740 Owner: TAMARACK PARK L L C "BMWIAV1s Fees ($) Add'I Fees ($) Total ($) Balance ($) 130 0 130 0 about:blank 1/1 AdO3 flH 1000 Howell Street, Unit A / Anaheim, CA 92805-6422 ACO 28—Contractor License # 880138 1(800) 477-4515 PROTECTED PREMISE Bruce Baker Towrihomes 2737 Madison Street Carlsbad, CA 92008 MONITORING COMPANY Bay Alarm Company 60 Berry Drive Pacheco, CA 94553 800-470-1000 California Alarm Operating License Number: ACO28 EQUIPMENT SUPPLIER & INSTALLER Bay Alarm Company 1000 Howell Street, Unit A Anaheim, CA 92805-6422 California Contractors License Number: 880138 C-b APPROVE , 9 IU BMTTED CARLSBAD FILE COPY DF-52418:A • A1-60 MS.9050UD Fire Alarm Control Panel with DACT General The Fire-Lite MS-9050UD is a Fire Alarm Control Panel (FACP) and Digital Alarm Communicator/Transmitter (DACT) combined into one circuit board. This compact, cost effective, intelligent addressable control panel supports up to 50 addres- sable devices of any type of detectors and modules. With an extensive list of powerful features, the MS-9050UD programs just like Fire-Lite's larger products, yet fits into applications pre- viously served only by conventional panels. The MS-9050UD's integral DACT transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The power supply and all electronics are contained on a single circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include remote annunciators and reverse polarity/city box transmitter. (4XTMF) Features Listed to UL Standard 864, 9th edition. Auto-program (learn mode) reduces installation time. Reports two devices set to the same address. On-board DACT. 20 software zones. Two independently programmable Style Z (Class A) or Style Y (Class B) NAC circuits. Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices. Remote Acknowledge, Silence, Reset and Drill via address- able monitor modules. Two programmable relays and one fixed trouble relay. Integral 80-character LCD display with backlighting. Real-time clock/calendar with automatic daylight savings control. History file with 500 event capacity. Detector sensitivity test capability (NFPA 72 compliant). Maintenance alert warns when smoke detector dust accu- mulation is excessive. One person audible or silent walk test with walk-test log and printout. Point trouble identification. Waterfiow (nonsilenceable) selection per monitor point. System alarm verification selection per detector point. PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant). Up to eight ANN-BUS annunciators. SLC COMMUNICATION LOOP: Single addressable SLC loop which meets NFPA Style 4, 6 and 7 requirements. 50 addressable device capacity (any combination of addressable detectors and modules). Compatible with Fire-Lite's addressable devices (refer to SLC Wiring Manual). by Honeywell NOTIFICATION APPLIANCE CIRCUITS (NACS): Two independently programmable output circuits. Circuits can be configured for the following outputs: - Style Y (C/ass B) - Style Z (C/ass A) - Door Holder Service - Aux Power Source Silence Inhibit and Autosilence timer options. Continuous, March Time, Temporal or California code for main circuit board NACs with two-stage capability. Selectable strobe synchronization per NAC. 2.5 A total power for NACs. NOTE: Maximum or total 24V0C system power shared between all NAC circuits and the ANN-BUS is 2.7 A. PROGRAMMING AND SOFTWARE: Autoprogram (learn mode) reduces installation time. Custom English labels (per point) may be manually entered or selected from an internal library file. Two programmable Form-C relay outputs. 20 software zones. Continuous fire protection during online programming at the front panel. Program Check automatically catches common errors not linked to any zone or input point. DF-52418:A 04/05/07 - Page 1 of 4 User interface LED INDICATORS AC Power (green) Fire Alarm (red) Supervisory (yellow) Trouble (yellow) Alarm Silenced signals (yellow) KEYPAD 16 key alpha-numeric pad. Acknowledge/Step Alarm Silenced Drill (Manual Evacuate) Reset (lamp test) Ordering Options MS-90501JD: Combination DACT/Fire Alarm Control Panel with one SLC loop. Includes main circuit board with display, chassis with transformer, backbox with door, plastic bag con- taining screws, cables, key, etc., manual. DP-51050: Optional dress panel for the MS-9050UD. TR-CE: Trim Ring for semi-flush mounting. BB-26: Battery backbox, holds up to two 25 AH batteries and CHG-75. BB-55F: Battery box, houses two 55 AH batteries CHG-75: Battery charger for lead-acid batteries with a rating of 25 to 75 AH. BAT Series: Batteries, see data sheet DF-52397. PRTIPK-CABLE: Cable printer/personal computer interface cable. PRN-6F: UL listed compatible event printer. Uses tractor-fed paper. OPTIONAL MODULES 4XTMF Reverse Polarity Transmitter Module: Provides a supervised output for local energy municipal box transmitter, alarm and trouble. Includes a disable switch and disable trou- ble LED. COMPATIBLE ANNUNCIATORS ANN-80: Remote LCD annunciator mimics the FACP display ANN-I/O: Input/Output Module for driving graphic annuncia- tors or relays ANN-S/PG: Serial/Parallel Printer Interface module for con- necting printer to FACP ADDRESSABLE DEVICES All feature a polling LED and rotary switches for addressing. CP355: Addressable low-profile ionization smoke detector. 5D355: Addressable low-profile photoelectric smoke detec- tor. SD355T: Addressable low-profile photoelectric smoke detec- tor with thermal sensor. H355: Fast-response, low-profile heat detector. H355R: Fast-response, low-profile heat detector with rate-of- rise option. AD355: Low-profile, intelligent, "Adapt" multi-sensor detector (B350LP base included). CLIP MODE ONLY BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sensitivity test. D350PL: Photoelectric low-flow duct smoke detector. D35ORPL: Photoelectric low-flow duct smoke detector with relay option. MMF-300: Addressable Monitor Module for one zone of nor- mally-open dry-contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of- line resistor. Module may be configured for either a Style B (Class B) or Style D (Class A) IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it provides two Style B (Class B) only lDCs. MMF-301: Miniature version of MMF-300. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox. MMF-302: Similar to MMF-300, but may monitor up to 20 con- ventional two-wire detectors. Requires resettable 24 VDC power. Consult factory for compatible smoke detectors. CMF-300: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appli- ances. Mounts directly to a 4.0" (10.16 cm.) electrical box. Notification Appliance Circuit option requires external 24 VDC to power notification appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500. BG-I2LX: Addressable manual pull station with interface module mounted inside. 1300: This module isolates the SLC loop from short circuit conditions (required for Style 6 or 7 operation). SMB500: Used to mount all modules except the MMF-301 and M301. MMF-300-10: Ten-input monitor module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six mod- ules on a CHS-6 chassis in a BB-6F cabinet. MMF-302-6: Six-zone interface module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six mod- ules on a CHS-6 chassis in a BB-6F cabinet. CMF-300-6: Six-circuit supervised control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CRF-300-6: Six Form-C relay control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. NOTE: 1) For more information on Compatible Addressable Devices for use with the MS-9050UD, see the following data sheets (document numbers): A0355 (DF-52386), BG-I2LX (DF- 52013), CMF-300-6 (DF-52365), CRF-300-6 (DF-52374), CMF/ CRF Series (DF-52 130), CP355 (DF-52383), D350PUD35ORPL (DF-52398), H355 Series (DF-52385), 1300 (DF-52389), MMF-300 Series/MDF-300 (DF-52121), MMF-300-10 (DF-52347), MMF- 302-6 (DF-52356), SD355/S0355T (DF-52384). 2) Legacy 300 Series detection devices such as the AD355, CP300/CP350, SD300(T)/S0350(T) and older modules such as the M300, M301, M302, C304, and BG-IOLX are not compatible with LiteSpeed polling, If the SLC contains one of these devices, polling must be set for standard CLIP protocol. Please consult fac- tory for further information on previous 300 Series devices. Page 2 of 4— OF-52418:A .04/05/07 ADDRESSABLE DEVICE ACCESSORIES End-of-Line Resistor Assembly (R-47K and R-3.9K): 47k ohm supervises the MMF-300, MDF-300, MMF-301, and CMF-300 module circuits. 3.9k ohm End-of-Line Resistor assembly supervises the MMF-302 module circuit. These resistors are included with each module. Power Supervision Relay: Supervises the power to 4-wire smoke detectors and notification appliances. N-ELR Mounting Plate: Single End-of-Line resistor plate required for use in Canada. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical inter- ference. Wire size should be no smaller than 18 AWG (0.78 mm2) and no larger than 12 AWG (3.1 mm2). The wire size depends on the length of the SLC circuit. Use the following table to determine the specific wiring requirements for the SLC. (Refer to the panel manual for complete details.) CIRCUIT CONNECTIONS WIRE REQUIREMENTS Circuit Type Circuit Wire Type and Recommended Max. Distance Wire Gauge and Compatible Brands Function Limitations Feet (meters) 12 AWG (3.25 mm2): Genesis 4410, Signal 98230, Belden 9583, WPW999 14 AWG (2.00 mm2):Genesis 4408 & 4608 Twisted, shielded pair Signal 98430, Belden 9581, WPW995 40 ohms maximum per 10,000 (3,000 m) 16 AWG (1.30 mm2): Genesis 4406 & 4606 length of Style 6 and 7 8,000 (2,400 m) Signal 98630, Belden 9575, WPW991 loops. 40 ohms per 4,875 (1,450 m) Direct Burial Cable lsotec branch maximum for Style 3,225 (980 m) NP713110VNQ-S 4 loops 18 AWG (0.75 mm2): Genesis 4402 & 4602 Signal 98300, Belden 9574, WPW975 SLC loop Connects to Direct Burial Cable Isotec (power-limited) Addressable NP7141 1 OVNQ-S Devices 12 AWG (3.25 mm2): Belden 5020UL & Twisted, unshielded pair 6020UL, Genesis WG-4315 & WG-4515 40 ohms maximum per 10,000 (3,000 m) 14 AWG (2.00 mm2):Belden 5120UL & length of Style 6 and 7 8,000 (2,400 rn) 6120UL, Genesis WG-4313 & WG-4513 loops. 40 ohms per 4,875 (1,450 m) 16 AWG (1.30 mm2): Belden 5220UL & branch maximum for Style 3,225 (980 m) 6220UL, Genesis WG-431 1 & WG-4511 4 loops 18 AWG (0.75 mm2): Belden 5320UL & ____ 6320UL,_ Genesis _WG-4306_&_WG-4506 Untwisted, unshielded 3,000 (900 m) 12-18 AWG (3.25-0.75 mm2) using listed ____ ____ pair2 wire ANN-BUS Connects to Twisted, shielded pair with (EIA-485) annunciator mod- a characteristic imped- 6,000 (1,800 m) 18 AWG (0.75 mm2) (power-limited) .ules ance of 120 ohms ElA-232 (power-limited) Connects to remote PC corn- Twisted, shielded pair 50 (15 m) 18 AWG (0.75 mm2) minimum puter _______________ MMF-300 and MMF-301 Initiating Device Maximum loop wire resis- tance is 40 ohms for the 2,500 (760 m) 12-18 AWG (3.25 - 0.75 mm2) (power-limited) Circuit MMF-300 and 20 ohms for the MMF-301 No more than a 2.4 volt MMF-302 Initiating Device drop allowed at end of cir- 2,500 (760 m) 12-18 AWG (3.25 - 0.75 mm2) (power-limited) Circuit cuit. Maximum loop wire resistance is 25 ohms CMF-300 Notification Appli- In alarm, no more than a 1.2 volt drop allowed at Distance limitation set by 1.2 volt 12-18 AWG (3.25-0.75 mm2) (power-limited) ance Circuit end of circuit maximum line drop a) When using untwisted, unshielded wire, full conduit is recommended for optimum EMI/RFl protection. DF-52418:A 04/05/07 - Page 3 of 4 SYSTEM SPECIFICATIONS -- System Capacity Intelligent Signalling Line Circuits . 1 Addressable device capacity............................................50 Programmable software zones.........................................20 Annunciators ......................................................................8 Electrical Specifications AC Power: 120 VAC, 60 Hz, 0.3 A. Battery: Two 12 V 18 AH lead-acid batteries. Battery Charger Capacity: 7-18 AH (MS-9050UD cabinet holds maximum of two 18 AH batteries.) Communication Loop: Supervised and power-limited. Notification Appliance Circuits: Terminal Block provides connections for two NACs, Style Y (Class B) or. Style Z (Class A). Special Application power. Power-limited, supervised cir- cuitry. Maximum signaling current per circuit: 2.5 A. End-of- Line Resistor: 4.7 kohm, 1/2 watt (PIN 71252 UL listed) for Style Y (Class B) NAC. Refer to the Fire-Lite Device Compatibility Document for listed compatible devices. Two Programmable Relays and One Fixed Trouble Relay: Contact rating: 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive). Form-C relays, nonpower-limited, nonsupervised. Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x 16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00" (50.80 cm.) high x 22.5" (57.15 cm.) wide x 8.5" (21.59 cm.) deep. Temperature and Humidity Ranges This system meet NFPA requirements for operation at 0 - 49°C132 - 120°F and at a relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). However, the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme tempera- ture ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15— 27°C/60 - 80°F. NFPA Standards The MS-9050UD complies with the following NFPA 72 Fire Alarm Systems requirements: - LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervisory). - AUXILIARY (Automatic, Manual and Waterflow) (requires 4XTMF). - REMOTE STATION (Automatic, Manual and Waterflow) (Where a DACT is not accepted, the alarm, trouble and supervisory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTMF is required.) - PROPRIETARY (Automatic, Manual and Waterflow). - CENTRAL STATION (Automatic, Manual and Waterflow, and Sprinkler Supervised). Agency Listings and Approvals The listings and approvals below apply to the basic MS- 9050UD control panel. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL: S624 FM approved CSFM: 7165-0075:210 MEA: 442-06-E LiteSpeed is a trademark; and FireLite® Alarms® and System Sensors are registered trademarks of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. ©2007 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. :2.j--------------II - This document is not intended to be used for installation purposes. I so 000i We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. EYSINEBINS &MflNIIFRCTIIING All specifications are subject to change without notice. QUALITY SYSTEMS Made in the U.S. A. For more information, contact Fire-Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Page 4 of 4— DF-52418:A •04/05/07 df-52384:A E-160 SD355(A), SD355T(A) FIre•LlTeALarms Addressable Photoelectric by Honeywell Smoke Detectors General The SD355(A) and SD355T(A) addressable, low-profile plug- in photoelectric detectors use a state-of-the-art photoelectric sensing chamber with communications to provide open area protection and are used exclusively with Fire-Lite's Address- able Fire Alarm Control Panels (FACP5). The SD355T(A) adds thermal sensors that will alarm at a fixed temperature of 135°F (57C). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED annun- ciator capability is available as an optional accessory (PIN RA400Z). Features SLC loop: Two-wire loop connection. Unit uses base for wiring. Addressing: Addressable by device. Direct Decade entry of address: 01 - 99 with MS-9200 and MS-9200UD and MS-9200UDLS, and 01 - 159 with MS- 9600, MS-9600LS, and MS-9600UDLS. Architecture: Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires. Sleek, low-profile design. Integral communications and built-in type identification. Built-in tamper-resistant feature. Removable cover and insect-resistant screen for simple field cleaning. Operation: Withstands air velocities up to 4,000 feet-per-minute (20 ml sec.) without triggering a false alarm. Factory preset at 1.5% nominal sensitivity for panel alarm threshold level. Visible LED "blinks" when the unit is addressed (communi- cating with the fire panel) and latches on in alarm. Mechanicals: Sealed against back pressure. Direct surface mounting or electrical box mounting. Mounts to: single-gang box, 3.5' (8.89 cm) or 4.0" (10.16 cm) octagonal box, or 4.0" (10.16 cm) square electrical box (using a plaster ring - included). Other system features: Fully coated circuit boards and superior RF/transient pro- tection. 94-VO plastic flammability rating. Low standby current. Options: Remote LED output connection (P/N RA400Z). SD355 with 6934ph01jpg B350LP base .935pho1Jp9 S0355T with B350LP base Applications Use photoelectric detectors in life-safety applications to pro- vide a broad range of fire-sensing capability, especially where smoldering fires are anticipated. Ionization detectors are often better than photoelectric detectors at sensing fast, flaming fires. Construction These detectors are constructed of off-white LEXAN®. SD355(T) plug-in, low-profile smoke detectors are designed to commercial standards and offer an attractive appearance. Installation SD355(T) plug-in detectors use a detachable mounting base to simplify installation, service and maintenance. Mount base on box which is at least 1.5 inches (3.81 cm) deep. Suitable boxes include: 4.0" (10.16 cm) square box with plaster ring. 4.0" (10.16 cm) octagonal box. 3.5" (8.89 cm) octagonal box. Single-gang box. NOTE: Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring '7-taps" or branches are permitted for Style 4 (Class B) wiring. df-52384:A- 12/19/08 - Page 1 of 2 Operation Each 5D355(T) uses one of 99 possible addresses on the MS- 9200, MS-9200UD and MS-9200UDLS and up to 318 (159 on each loop) on the MS-9200 series Signaling Line Circuit (SLC). It responds to regular polls from the system and reports its type and status. The SD355(T) addressable photoelectric sensor's unique uni- polar chamber responds quickly and uniformly to a broad range of smoke conditions and can withstand wind gusts up to 4,000 feet-per-minute (20 m/sec.) without sending an alarm level signal. Because of its unipolar chamber, the SD355(T) is approximately two times more responsive than most photo- electric sensors. This makes it a more stable detector. Detector Sensitivity Test Each detector can have its sensitivity tested (required per NFPA 72, Chapter 7 on Inspection, Testing and Maintenance) when installed/connected to a MS-9200, MS-9200UD, MS- 9200UDLS, or MS-9600, MS-9600LS and MS-9600UDLS addressable fire alarm control panel. The results of the sensi- tivity test can be printed off the MS-9200, MS-9200DLS, MS- 9200UD, MS-9600, MS-9600LS or MS-9600UDLS for record keeping. Specifications Voltage range: 15-32 VDC (peak). Standby current: 300 pA @ 24 VDC. LED current: 6.5 mA @ 24 VDC (latched "ON"). Air velocity: 4,000 ft/mm. (20 m/sec.) maximum. Diameter: 6.1" (15.5 cm) installed in B350LP base. Height: 2.1" (5.33 cm) installed in B350LP base. Weight: 3.6 oz. (102 g). Operating temperature range: for SD355(A): 0°C to 49°C (32°F to 120°F); for SD355T(A): 0°C to 38°C (32°F to 100°F). Temperature: 0°C - 49°C (32°F - 120°F). Relative humidity: 10% - 93%, non-condensing. Listings Listings and approvals below apply to the SD355(A) and SD355T(A) detectors. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Listed, file S1059 ULC Listed, file S6963 CSFM approved: file 7272-0075:194 MEA approved: file 243-02-E FM approved Product Line Information NOTE: "A" suffix indicates ULC-Listed model. SD355: Adressable photoelectric detector; B350LP base included. SD355A: Sames as SD355 with ULC Listing (B350LPA base included). SD355T: Same as 5D355 but with thermal element; B350LP base included. SD355TA: Same as 5D3551 with ULC Listing (B350LPA base included). B35OLP(A): Plug-in detector base. Dimensions: 6.1" (15.5 cm). Mounting: 4.0" (10.16 cm) square box with or without plaster ring, 4.0" (10.16 cm) octagonal box, 3.5" (8.89 cm) octagonal box, or single-gang box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). B224RB(A): Plug-in System Sensor relay detector base. Diameter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 cm) square box with or without plaster ring, 4.0" (10.16 cm) octagonal box, or 3.5" (8.89 cm) octagonal box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). B224B1(A): Plug-in System Sensor isolator detector base. Maximum 25 devices between isolator bases (see DF-52389). Diameter: 6.2" (15.75 cm). Mounting: 4.0" (10.16 cm) square box with or without plaster ring, 4.0" (10.16 cm) octagonal box, or 3.5" (8.89 cm) octagonal box. All mounting boxes have a minimum depth of 1.5" (3.81 cm). B50IBH-2(A): Plug-in System Sensor sounder detector base. Diameter: 6.0" (15.24 cm). Mounting: 4.0" (10.16 cm) square box with or without plaster ring. Mounting box has a minimum depth of 1.5" (3.81 cm). B50IBHT-2(A): Plug-in System Sensor temporal tone sounder detector base. ACCESSORIES: RA400Z(A): Remote LED annunciator. 3 - 32 VDC. Mounts to a U.S. single-gang electrical box. For use with B501(A) and B350LP(A) bases only. SMK400: Surface mounting kit provides for entry of surface wiring conduit. For use with B501 (A) base only. RMK400: Recessed mounting kit. For use with 8501(A) base only. M02-04-00:Test magnet. M02-09-00: Test magnet with telescoping handle. XR213: Detector removal tool. Allows installation and/or removal of detector heads from bases in high ceiling applications. XP-4: Extension pole for XR213. Comes in three 5-foot (1.524 m) sections. Fire-Lite® Alarms is a registered trademark of Honeywell International Inc. LEXAN® is a registered trademark of GE Plastics, a subsidiary of General Electric Company. ©2008 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. is0 00i We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. ENGINFERIN &MMUFiCtUKINB All specifications are subject to change without notice. QUALITY SYSTEMS For more information, contact Fire-Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Page 2 of 2- df-52384:A 12/19/08 Manual stations shall connect with two wires to one of the con- trol panel SLC loops. The manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. Manual stations shall provide address setting by use of rotary decimal switches. Product Line Information BG-I2LX: Dual-action addressable pull station. Includes key locking feature. S13-11 0: Surface backbox; metal. SB-I/O: Surface backbox; plastic. BGI2TR: Optional trim ring. 17003: Keys, set of two. Agency Listings and Approvals In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. UL Listed: 5711 MEA: 67-02-E CSFM: 7150-0075:184 FM Approved 1l S Back of station without door Terminal Connections: 1 SLC (-); 2 SLC (+) Detail of BREAKAWAY TAB* 15 0 ADDRESS 0 7 13 2 2 LED * Remove tab to select addresses above 99. Cover open to show easy access to miniature monitor module, rotary switch, and UL label. Patented: U.S. Patent No. D428,351; 6,380,846; 6,314,772; 6,632,108. FlreLlte is a registered trademark of Honeywell International Inc. LEXAN® is a registered trademark of GE Plastics, a subsidiary of General Electric Company. ©2008 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. ISO 9001 We try to keep our product information up-to-date and accurate. ______ _____________ ffTTq_:%_Zr2T1="We cannot cover all specific applications or anticipate all requirements. EIIIIIIIIIEERINS & MRNVFACTIRING All specifications are subject to change without notice. QUALITY SYSTEMS Made in the U.S. A. For more information, contact Fire-Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Page 2 of 2— DF-52013:13• 10/20/2008 BG-1 2LX Addressable Manual Pull Station General The Fire-Lite BG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for Fire-Lite's addressable fire alarm control panels (FACP5). Because the BG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. Features Maintenance personnel can open station for inspection and address setting without causing an alarm condition. Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. Handle latches in down position and the word "ACTIVATED" appears to clearly indicate the station has been operated. Captive screw terminals wire-ready for easy connection to SLC loop (accepts up to 12 AWG/3.25 mm2 wire). Can be surface mounted (with SB-10 or SB-I/O) or semi- flush mounted. Semi-flush mount to a standard single- gang, double-gang, or 4" (10.16 cm) square electrical box. Smooth dual-action design. 'Meets ADAAG controls and operating mechanisms guide- lines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force. Highly visible. Attractive shape and textured finish. Key reset. Includes Braille text on station handle. Optional trim ring (BG12TR). Meets UL 38, Standard for Manually Actuated Signaling Boxes. Construction Shell, door, and handle are molded of durable LEXAN® (or polycarbonate equivalent) with a textured finish. Specifications Normal operating voltage: 24 VDC. Maximum SLC loop voltage: 28.0 VDC. Maximum SLC loop current: 230 pA. Ambient Temperature: 32°F to 120°F (0°C to 49°C) Relative Humidity: 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F) For use indoors in a dry location Installation The BG-12LX will mount semi-flush into a single-gang, double- gang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model SB-10 or SB-I/O surface back- box. If the BG-12LX is being semi-flush mounted, then the optional trim ring (BG12TR) may be used. The BG12TR is usually needed for semi-flush mounting with 4" (10.16 cm) or double-gang boxes (not with single-gang boxes). DF-52C13:B • E-100 F]re•LITeALarms by Honeywell Operation Pushing in, then pulling down on the handle caLses it to latch in the down/activated position. Once latched, the word "ACTI- VATED" (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the s"ation with the key and pull the door open. This action resets the handle; clos- ing the door automatically resets the switch. Each manual station, on command from the ontrol panel, sends data to the panel representing the state )f the manual switch. Two rotary decimal switches allow address settings (1 - 159 with Breakaway Tab removed for MS-9600, 1 - 99 and MS-9200UDLS, 1 - 50 for MS-9050UD). Architectural/Engineering Specifications Manual Fire Alarm Stations shall be non-coded, with a key- operated reset lock in order that they may be tasted, and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key. An operated sta- tion shall automatically condition itself so as :o be visually detected as activated. Manual stations shall be constructed of red-colored LEXAN (or polycarbonate equivalert) with clearly visible operating instructions provided on the cover. The word FIRE shall appear on the front of the stations ir white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching backbox SB-10 or SB-I/O; or semi-flush mounting on a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box, and shell be installed within the limits defined by the Americans with Disabilities Act (ADA) or per national/local requirements. Manual Stations shall be Underwriters Laboratories listed. DF-52013:B• 1O/20/20C'8—Page 1 of 2 MMF.300(A) Series, MDF-300(A) Addressable Monitor Modules General Four different monitor modules are available for Fire-Lite's intelligent control panels to suit a variety of applications. Moni- tor modules are used to supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors (MMF-302. MMF-300 is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Class A (Style D) or Class B (Style B) circuit of dry-contact input devices. MMF-301 is a miniature monitor module (a mere 1.3" (3.302 cm) H x 2.75' (6.985 cm) W x 0.5" (1.270 cm) D) used to supervise a Class B (Style B) circuit of dry-contact input devices. Its compact design allows the MMF-301 to often be mounted in a single-gang box behind the device it monitors. MMF-302 is a standard-sized module used to monitor and supervise compatible two-wire, 24 volt, smoke detectors on a Class A (Style D) or Class B (Style B) circuit. MDF-300 is a standard-sized dual monitor module used to monitor and supervise two independent two-wire Style B (Class B) dry-contact initiating device circuits (IDCs) at two separate, consecutive addresses in intelligent, two-wire systems. LiteSpeed is a communication protocol developed by Fire-Lite Engineering that greatly enhances the speed of com- munication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs. MMF-300 Monitor Module Built-in type identification automatically identifies this device as a monitor module to the control panel. Powered directly by two-wire SLC loop. No additional power required. High noise (EMF/RFl) immunity. SEMS screws with clamping plates for ease of wiring. Direct-dial entry of address: 01 - 159 on MS-9600 series panels, 01 - 99 on other compatible systems. LED flashes during normal operation and latches on steady to indicate alarm. The MMF-300 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each mod- ule is selected using the built-in rotary switches. It provides either a two-wire or four-wire fault-tolerant Initiating Device Cir- cuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The MMF-300 can be used to replace M300 modules in existing systems. MMF-300 APPLICATIONS Use to monitor a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally- open dry-contact alarm activation devices. May also be used to monitor normally-open supervisory devices with special supervisory indication at the control panel. Monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class df-52121:b E-325 Flre•LlTeAtarms by Honeywell MMF-300 (Type H) A) Initiating Device Circuit. A 47K ohm End-of-Line Resistor (provided) terminates the Style B circuit. No resistor is required for supervision of the Style D circuit. MMF-300 OPERATION Each MMF-300 uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limita- tions on the loop). MMF-300 SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.0 mA (LED on). Maximum operating current: 375 pA (LED flashing). Maximum IDC wiring resistance: 1,500 ohms. EOL resistance: 47K ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% nonconderising. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MMF-301 Mini Monitor Module Built-in type identification automatically identifies this device as a monitor module to the panel. Powered directly by two-wire SLC loop. No additional power required. High noise (EMF/RFI) immunity. Tinned, stripped leads for ease of wiring. Direct-dial entry of address: 01 - 159 on MS-9600 series panels, 01 - 99 on other compatible systems. df-52121:b 11113108—Page 1 014 14),Q 1 FAD DRESS 13i -: 12"1T'>"3 I - LOOP ( 2/7 I 14 j TENS ONES Uj 0 -I UJ 0 The MMF-301 Mini Monitor Module can be installed in a sin- gle-gang junction directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mount- ing. The MMF-301 is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiating device circuit for normally-open-contact fire alarm devices. The MMF-301 can be used to replace M301 modules in exist- ing systems. MMF-301 APPLICATIONS Use to monitor a single device or a zone of four-wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally-open dry-contact devices. May also be used to monitor normally-open supervisory devices with special super- visory indication at the control panel. Monitored circuit/device is wired as an NFPA Style B (Class B) Initiating Device Circuit. A 47K ohm End-of-Line Resistor (provided) terminates the cir- cuit. MMF-301 OPERATION Each MMF-301 uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC). MMF-301 SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum operating current: 375 pA. Maximum IDC wiring resistance: 1,500 ohms. I EOL resistance: 47K ohms. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 1.3" (3.302 cm) high x 2.75" (6.985 cm) wide x 0.65" (1.651 cm) deep. Wire length: 6" (15.24 cm) minimum. MMF-302 Interface Module LED latches steady to indicate alarm on command from control panel. The MMF-302 Interface Module is intended for use in intelli- gent, addressable systems, where the individual address of each module is selected using built-in rotary switches. This module allows intelligent panels to interface and monitor two- wire conventional smoke detectors. It transmits the status (nor- mal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being moni- tored must be UL compatible with the module. The MMF-302 can be used to replace M302 modules in existing systems. MMF-302 APPLICATIONS Use the MMF-302 to monitor a zone of two-wire smoke detec- tors. The monitored circuit may be wired as an NFPA Style B (Class B) or Style D (Class A) Initiating Device Circuit. A 3.9 K ohm End-of-Line Resistor (provided) terminates the end of the Style B or D (class B or A) circuit (maximum IDC loop resis- tance is 25 ohms). Install ELR across terminals 8 and 9 for Style D application. MMF-302 OPERATION Each MMF-302 uses one of the available module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/short) of its Initiating Device Circuit (IDC). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limita- tions on the loop). MMF-302 SPECIFICATIONS Nominal operating voltage: 15 to 32 VDC. Maximum current draw: 5.1 mA (LED on). Maximum IDC wiring resistance: 25 ohms. Maximum operating current: 270 pA (LED flashing). EOL resistance: 3.9K ohms. External supply voltage (between Terminals T3 and T4): DC voltage: 24 volts power limited. Ripple voltage: 0.1 Vrms maximum. Current: 90 mA per module maximum. Temperature range: 32°F to 120°F (0°C to 49°C). Humidity range: 10% to 93% noncondensing. Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box. MDF-300 Dual Monitor Module The MDF-300 Dual Monitor Module is intended for use in intel- ligent, two-wire systems. It provides two independent two-wire initiating device circuits (lDCs) at two separate, consecutive addresses. It is capable of monitoring normally open contact fire alarm and supervisory devices. The module has a single panel-controlled LED. NOTE: The MDF-300 provides two Class B (Style B) IDC circuits ONLY. Class A (Style D) IDC circuits are NOT supported in any application. MDF-300 SPECIFICATIONS Supports compatible two-wire smoke detectors. Normal operating voltage range: 15 to 32 VDC. Supervises IDC wiring and connection of external power Maximum current draw: 6.4 mA (LED on). source. Maximum operating current: 750 pA (LED flashing). High noise (EMF/RFI) immunity. Maximum IDC wiring resistance: 1,500 ohms. SEMS screws with clamping plates for ease of wiring. Direct-dial entry of address: 01 - 159 on MS-9600 series EOL resistance: 47K ohms. panels, 01 —99 on other compatible systems. Temperature range: 32° to 120°F (0° to 49°C). LED flashes during normal operation. Humidity range: 10% to 93% (non-condensing). Page 2of4—df-52121:b. 11/13/08 Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 2.125 (5.398 cm) deep. MDF-300 AUTOMATIC ADDRESSING The MDF-300 automatically assigns itself to two addressable points, starting with the original address. For example, if the MDF-300 is set to address "26", then it will automatically assign itself to addresses "26" and "27". NOTE: "Ones" addresses on the MDF-300 are 0, 2, 4, 6, or 8 only. Terminals 6 and 7 use the first address, and terminals 8 and 9 use the second address. CAUTION: Avoid duplicating addresses on the system. Installation MMF-300, MMF-302, and MDF-300 modules mount directly to a standard 4" (10.16 cm) square, 2.125" (5.398 cm) deep, electrical box. They may also be mounted to the SMB500 sur- face-mount box. Mounting hardware and installation instruc- tions are provided with each module. All wiring must conform to applicable local codes, ordinances, and regulations. These modules are intended for power-limited wiring only. The MMF-301 module is intended to be wired and mounted without rigid connections inside a standard electrical box. All wiring must conform to applicable local codes, ordinances, and regulations. Agency Listings and Approvals In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult fac- tory for latest listing status. UL: S2424 ULC: S3705 ("A" suffix models) FM Approved CSFM: 7300-0075-185 MEA:72-01-E Product Line Information NOTE: "A" suffix indicates UL Listed model. MMF-300(A): Monitor module. MMF-301(A): Monitor module, miniature. MMF-302(A): Monitor module, two-wire detectors. MDF-300(A): Monitor module, dual, two independent Class B circuits. SMB500: Optional surface-mount backbox. NOTE: See installation instructions and refer to the SLC Wiring Manual, PN 51309. Architects/Engineers' Specifications Specifications of these devices and all FireLite products are available from FireLite. clf-52121:b 11/13/08 -Page 3 of 4 FireLite® and LiteSpeed® are registered trademarks of Honeywell International Inc. 02008 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. iso 000i We try to keep our product information up-to-date and accurate. _____________ - We cannot cover all specific applications or anticipate all requirements. ENSINEERINS & M&NDFCTIBIN All specifications are subject to change without notice. QUALITY SYSTEMS Made in the U.S. A. For more information, contact Fire-Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Page 4of4—df-52121:b• 11/13/08 Series AS Audible Strobe Appliances and Series AH Audibles Description The Wheelock patented 2-wire Series AS Audible Strobe Appliances and Series AH Audibles offer more features with low current draw. Strobe options for wall mount models include 1575cd or the Wheelock patented MCW multi-candela wall strobes with field selectable candela settings of 15/30/75/110cd, or the high intensity MCWH strobe with field selectable 135/185cd. Ceiling mount models incorporate Wheelock's patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75195cd or the high intensity MCCH strobe with field selectable 115/177cd. The audible provides a selectable choice of either a continuous horn or temporal pattern (Code 3) when constant voltage from a Fire Alarm Panel (FACP) is applied. Each tone has 3 dBA settings to choose from. When used with the Wheelock Series SM,DSM Sync Modules, Wheelock Power Supplies or other manufacturers panels incorporating the Wheelock Patented Sync Protocol, synchronization of the continuous horn tone provides the temporal (code 3) tone (mandated by NFPA72) simultaneously for all audible appliances. This ensures a distinct temporal (code 3) pattern when 2 or more audibles are within hearing distance. If not synchronized the temporal sound could overlap and not be distinctive. At the same time the strobes will be synchronized. This provides the ability to comply with ADA guidelines concerning photosensitive epilepsy and the NFPA standards when installing 2 or more visual appliances within the field of view all of this plus the ability to silence the audible is achieved by using only 2 wire. Features Approvals include: UL Standard 1971, UL Standard 464 New York City (MEA), California State Fire Marshal (CSFM), Factory Mutual (FM), and Chicago (BFP). See approvals by model in Specifications and Ordering Information ADAJNFPNUFC/ANSI Compliant Wall mount models are available with Field Selectable Candela Settings of 15/30/75/110cd or 135/185cd (Multi- Candela models) or 1575cd (single candela model) Ceiling mount models are available with field selectable candela settings of 15/30/75/95cd or 115/177cd (multi-candela ceiling models) Selectable Continuous Horn or Temporal (Code 3). 3 Selectable dBA settings (99, 95 and 90 dBA) in both tones Patented 2-Wire Audible Strobe Appliance. Patented Universal Mounting Plate Weatherproof models are available for outdoor use Strobes produce 1 flash per second over the regulated voltage range 12 and 24 VDC models with wide UL "Regulated Voltage Range" using filtered DC or unfiltered FWR input voltage Synchronize using the Wheelock Sync Modules or panels with built-in Wheelock Patented Sync Protocol Fast installation with IN/OUT screw terminals using #12 to #18AWG wires For Weatherproof Series AS, See Datasheet S9004 ru I OL MEA APPROVED E5946 151-92-E 7125-0785:131 S5391 24 VDC Models AH-24 AS-241575W 1575cd High (99) dBA 24 vdc 0.062 0.100 UL max* 0.080 0.121 Med (95) dBA 24 vdc 0.033 0.080 UL max* 0.043. 0.107 Low (90) dBA 24 vdc 0.017 0.072 UL max* 0.021 0.100 12 VDC Models Audible Wall Mount Audible Strobe AH-12 AS-121575W High (99) 0.163 0.260 ~l2vdc UL max* 0.192 0.320 dBA Med (95) 12 vdc 0.076 0.195 UL max 0.108 0.275 dBA Low (90) 12 vdc 0.039 0.175 UL max* 0.058 0.265 dBA NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed in bold capital letters. A WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. VISIT WWW.COOPERWHEELOCK.COM OR CONTACT COOPER WHEELOCK FOR THE CURRENT INSTALLATION INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. Genera! Notes: Strobes are designed to flash at 1 flash per second minimum over their "Regulated Voltage Range". Note that NFPA-72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second. All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971. Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32°F to 120°F (0°C to 49°C) and maximum humidity of 93% (± 2%). Series NH horns are listed under UL Standard 464 for audible signal appliances (Indoor use only). "Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change UL used the terminology "Listed Voltage Range". Table 1: Ratings Per UL 1971 Model Number Input Voltage VDC Regulated Voltage Range VDC/FWR Strobe Candela (Cd) AS-24MCW 24 16.0-33.0 15/30/75/110 AS-24MCCH 24 16.0-33.0 115/177 AS-241575W 24 16.0-33.0 15 (75 on Axis) AS-121575W 12 8.0-17.5 15 (75 on Axis) AS-24MCC 24 16.0 -33.0 15/30/75/95 AS-24MCWH 24 16.0-33.0 135/185 rASWP-2475W 24 16.0 -33.0 75 @ -31°F Table 3: Average RMS Current Table 2: dBA Ratings for 12 VDC and 24 VDC Series AS/ AH 12 and 24 VDC Audible Reverberant Anechoic Description Volume dBA Per UL 464 dBA @ 10 ft. loft. High 91 99 Continuous Medium 88 95 Horn Low 83 90 High 87 99 Medium 84 95 Code 3 Horn Low 79 90 Audible I Wall Mount Audible Strobe Models Ceiling Mount Audible Strobe Models AS-24MCW AS-24MCWH AS-24MCC AS-24MCCH 15cd 30cd 75cd llOcd 135cd 185cd 15cd 30cd 75cd 95cd 11 5c 177cd 0.080 0.102 0.150 0.194 0.250 0.320 0.088 0.114 0.165 0.205 0.250 0.320 0.088 0.125 0.200 0.267 0.355 0.480 0.095 0.138 0.221 0.285 0.355 0.480 0.060 0.084 0.132 0.173 0.230 0.305 0.066 0.092 0.145 0.186 0.230 0.305 0.074 0.110 0.190 0.253 0.340 0.465 0.080 0.122 0.201 0.269 0.340 0.465 0.052 0.076 0.121 0.158 0.220 0.295 0.056 0.082 0.132 0.173 0.220 0.295 0.068 0.105 0.182 0.245 0.335 0.460 0.074 0.113 0.198 0.263 0.335 0.460 Table 4: Average Current* (AMPS) For Series ASWP# Voltage High dBA Setting (99) dBA Medium dBA Setting (95) dBA Low dBA Setting (90) dBA 24.0 VDC 0.128 0.105 0.098 ULMax* 0.168 0.155 0.150 * RMS current ratings are per UL average RMS method. UL max current rating is the maximum RMS current within the listed voltage range (16-33v for 24v units). For strobes the UL max current is usually at the minimum listed voltage (16v for 24v units). For audibles the max Current is usually at the maximum listed voltage (33v for 24v units). For unfiltered RNR ratings, see installation instructions. Wiring Diagrams SERIES AS APPLIANCES NON-SYNCHRONIZED FROtILI TO NEXTO PRECEDINGE _PPLIANCE0 PPLIANCEO I I I OR EOLRU OR FACPLI +0 SERIES AS & RSS APPLIANCES SYNCHRONIZED WITH PS-12124-8CP and PS-12124-8MP o FO - 1-40 MM 10L50 tJTPUTSO 4 -C LAS SO AL ASO F 0 000 2-CLASSO ASO RS1 Series 05-12/24-8 00 or 05-12/24-8000 SERIES AS APPLIANCES SYNCHRONIZED WITH DSM MODULE CLASS"A" NAC CIRCUIT WITH NO AUDIBLE SILENCE FEATURE SERIES AS APPLIANCES SYNCHRONIZED WITH SM MODULE SIN- GLE CLASS 'B" NAC CIRCUIT WITH AUDIBLESILENCE FEATURE smo FF11 -0 IOSTROBED StroheD L21 p El 1 ----_ OTACO Cirouitfl SERIES AS APPLIANCES SYNCHRONIZED WITH MULTIPLE DSM MODULES .-SM I10 DSM Interconnecting wiring shown. Maximum twenty (20)0 11 For detail using SM or DSM Sync Module refer to Data Sheet S3000 or Installation Instructions P83123 for SM and P83177 for DSM. For wiring informationon the power supplies refer to Installation Instructions P84662 for PS-24-81VIC. Specifications and Ordering Information Model Number Order Code Strobe Candela Non Sync DSM Sync w/SM, or 24 VDC 12 VDC Wall Mount Mount Ceiling Agency Mounting Options* Approvals S-24MCW-FR 9024 15/30/75/110 X X X - X - A,B,D,E,F,G,H,J,N,O,R,X X X X X X S-24MCW-FW 9025 15/30/75/110 X X X - X - A,B,DE,F,G,H,J,N,O,R,X X X X X X .S-24MCWH-FR 3468 135/185 X X X - X - A,B,D,E,FG,H,J,N,O,R,X X X X X * S-24MCWH-FW 3469 135/185 X X X - X - A,B,D,EFG,H,J,N,O,R,X X X X X * ..S-241575W-FR 7405 15(75onAxis) X X X - X - A,B,DE,F,G,H,J,N,O,R,X X X X X X AS-1 21575W-FR 7410 15(75onAxis) X X - X X - AB,DE,F,GH,JN,OR,X X X X X X AS-24MCC-FR 3161 15/30/75/95 X X X - - X A,B,DE,F,G,H,JN,OR,X X X X X * S-24MCC-FW 3162 15/30/75/95 X X X - - X A,B,D,E,F,G,H,J,N,O,R,X X X X X * S-24MCCH-FW 3467 115/177 X X X - - X A,B,D,E,F,G,H,J,N,O,R,X X X X X * SWP2475WFR** 9012 75 @ -31°F X X X - X - I(see Data Sheet S9004) X X X X X H-24-R 7892 - X X X - X X ABD,E,F,G,H,J,N,O,R,X X X X X X H-24-W 7893 - X X X - X X AB,D,E,FG,HJNO,R,X X X X X X AH-12-R 7891 - X X - X X X A,B,D,E,F,G,H,JN,O,R,X X X X X X H-12-W 7894 - X X - X X X ABD,EF,G,HJN,O,R,X X X X X X .H24WPR** 7416 - X X X - X X K X X X X H12WPR** 7415 - X X - X X X K X X X X —For Weatherproof SeriesAS/AH specifications see data sheet S9004. *PENDING °Refer to Data Sheet S7000 for Mounting Options. Note: Models are available in either Red or White. Contact Customer Service for Order Code and Delivery. NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Wheelock Inc. standard terms and conditions. S8100 AS/AH 10/07 Notification Cooper Notification is Wheelock" (MEDCJ SAFEPATH WAV Architects and Engineers Specifications The notification appliances shall be Wheelock Series AS Audible Strobe appliances and Series AH Audible appliances or approved equals. The Series AS Audible be listed for UL Standard 1971 (Emergency Devices for the Hearing-Impaired) for Indoor Fire Protection Service. The Series AH Audible shall be UL Listed under Standard 464 (Fire Protective Signaling). Both shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible with standard reverse polarity supervision of circuit wiring by a Fire Alarm Control Panel (FACP). The audible portion of the appliance shall have a minimum of three (3) field selectable settings for dBA levels and shall have a choice of continuous or temporal (Code 3) audible outputs. The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexan® lens. The Series AS shall be of low current design. Where Multi- Candela appliances are specified, the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971 at 15/30/75/110 01135/185 candela for wall mount and 15/30/75/95 or 115/177 candela for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 1575 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with 75 candela on-axis is required (e.g. ADA compliance). When synchronization is required, the appliance shall be compatible with Wheelock's SM, DSM Sync Modules, Wheelock Power Supplies or other manufacturers panels with built-in Wheelock Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation. If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobe shall revert to a non-synchronized flash-rate. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation when used with Wheelock synchronization. The Series AS Audible Strobe and Series AH Audible shall incorporate a Patented Universal Mounting Plate that shall allow mounting to a single-gang, double-gang, 4-inch square, 1 00m European type backboxes, or the SHBB Surface Backbox. If required, an NATP (Notification Appliance Trimplate) shall be provided. All notification appliances shall be backward compatible. Member' WE ENCOURAGE AND SUPPORT NICET CERTIFICATION 3 YEAR WARRANTY Made in USA H "WE MMQ IT MAPPEN" Wire & Ceblet COMPY; PAGE ELCTEC (CA) Dr!: 05/0107 TWC PT MEP. vooa3/aoB3(/cM/PLTc CONSTRUCTION ; 16AWG SOLID BARS COPPER 2 1L13C'O;. OVE?)LL !OZt. COLOR CODE ; CC1; BLAC11 WHID flSt.7ITIN 0.016 Inch, 105 PVC SEIX1PJtrLALUM/POLY POIL 10014 COV. 24G 7132 TC. DW. cPACITNC ; 40.5 PP/ft km. VEL OF PROP 55rg IMPEDANCR 46 OMM$ RESI5T10E 4.01$ OEM D.C. PER 1000 YT 9 6 TEMP/VOLTAGE 105 DEGREES C JAC(ET BLACK, 0.02 105 PVC -- 0236 Ncyn 0 CABLE VT 35.87 Lb/1000P. Appzox (EXCLMIM RL. Olt 30X 1flT LEGD BAY ALI co. P/Ni75162M29D 3192596 (PT) C?4lPLTC/ITC/PL 6'WQ 2/C 90 (UL) C(tJT.1) losc SUN RS. DIL BR. UL CN/PLTC ctZSC MALE IN 119A * s/ 10% m-mufact=jAq tolerance * Qa non-standard product, cumtomer aees to accept all lath ctired APPROVED BY - 8 d 9°N 31/A Mdvi wiW e LOU - L0160 39d VO DIJD3-13 3E)IVd -. TAPPA 4t NUla ff MAYPEN" Wire & Cable CO3X: PAIGE ELECTRIC DA; 05/04/07 TWC PART bTCUI 1750007.1/1680B32/CM/PLTC coNsTucrIO? 16AWC. SOLID BARB 2 ONDTORS - C0QR CODE ; ee#. INSULATION 0.0 Inch, 3-05 PVC ix cPAC!TcE 26.1 Pft VRLOF PROP 55% XMDNCE 71 OHMS RESISTANCE i4.010 os n.e. p T/VOXTAE 105 DEGREES JOET r 3LA=1 0.035 Thh, 15 ave -- 9 .236 mom OD Ci%3..2 WT 34.47 Lb/.00Ot Apprx (ZCLIJDING RHIM OR EQS) PRINT LEGEND BAT AZa= CO.. PIN09162DMO E192.596 (VT) CM/PZTC/TC/P?L 2/C (U) CM) 105C St R- DIR. 1M. UL Cm/PLTC NIC =3 IN USA t 4/- 10% Manufacturing to1eaLce * on nan-sumdard product, 009tomwx agreds to ept All 3.8n9ths mazuacted APPRCVD B 9 'd 9 - 3IM ddVid I9Q ø/l' 39'd I3 31èL13313 .391d E6-EE9-99 s:go LG/t'O/SG — TAPPANJt "WE MAKE IT EL&PPEN" - Wire b1e Inc. COW?=t PAIGS ELC2C AE: 05/04/07 rwe PART N0; U40009.1/10BB2//PL c0 0N 2 C0NDCT0RS. COLOR ODZ 01 E02LE INSULATION 0.016 Inch, 105 'PVC 8EELD/DRIN N/A CAPACITAYCE 23 .5 VF/ft Nci. VI0FPROP ; 55% =EDANCE 79 0S RESISTANCE 5.385 0f3 pan 1000 FT G 68 DEC. v E/VOLTAGS 105 DGEEEZ 0.035 x.ch, 105 04.5 X= OD C=z NT ; 26.4s Lbf1000Yt ApOX MMUDING 2ZJ 02 BOX) PRINT LEGEND BAY AL.PM W. P/lq;75182BN$0 E191596 (fl') /PLCfZT/fPL 19.wc 2/C (TrL) c('UL) 105C SUN PEI. DIR. 3U2. UL cx/PtTc Misc MADE Mg USA w /.. 10% faetriig te On t=ar pthit, customer agreea to accept all lQu9ths maoturd APPROVED BY 31M NVddVi.AdWE LOU'i' L0190 39W kiD 3IeLL013 301Vd EØ TAP PA --4 - Wire S Cable Inc. COMPANY; ?JIGE ELECTRIC T; 09/04/07 TW PART CONS UCTZO1 18MG SOT 1ARY1 dtPPM 4 C0=UCORS. COLOR, CODE CC#17; BLACK., R,,TE,G1EN 0.015 Iuc, .1.05 PVC SLD/DP.AIN I N/A CAPATANCE : 19.8 PP/ft WOM- VEL OF PRO? 55% !EDAzrCE 93 oS RIST. 6.388 ou3 D.C. P= 1000 FT St 6$ Pgo. ? TP/VOLTAB 105 xmlzms C BLACZ, 0031; Xeh, 105 WVC -- 0.245 N CABLE WT = iooit A?pxox (E==ING R!L OR BOX) co. N.9.596 (P) Ct/PLTC/1C/F .2AWG 2C (mJ) (L) 105C SM RE. DIR, RUL DL CN/LTC 10% xiinufacturizg tolerance * On non-Btadard podut, eustmer ages to *eept all 1gts mtatiiod -. )LPPROVID BY -- •9 HIM NVddVI 01M E LU L0/90 39Vd V3 OIdi=3 3EP'8 6-69-- TADMAKIt I P F F t I N "WE MAKE IT IIAPPEN" -- Wire&Cabf nd-' COHPMY: PAIGE ZLZCTR.XC DM 5/04/07 TWC MT NUL; 0002.1J1490232/PLTC/FpL cOSRUCTON 14PWG $OLff aASW COPPER 2 OODUCOR5. COLOR CODE CC2. IKIZTE INSULUTON 0.016 Inch 105 VC HILD/DRAI1 CPACIAN 29.1. p1ft VEL OF 55% PDC2 64 OHM RISISTMCS 2.525 CIThdS D.C. PER 1000 9V 9 68 DEC. F MWIVOLTAM 105 DEORE$ C JACT : BTØ1(, 0.0Q Ieh, 105 WO -- 0272 Nam CD CABLE W! 49,24 Lb/.000t Appro ( CLUDO REEL OR BOX) PRINT LEGZBAy ATJUW tO. P/i7142DSO E.91591 (PT) P/=C/ 14A WO 2/C (XL 106C ZON HZ?. D3R. BT)R. XhDE IN V84 trx ; MISC MAch IM USA .f./ 10% Xanufactuzing tea= On ton-standard prod%mto euxtOn2r m9rews to accept al.) 1nth aetd - ?IPPROVD By IM NVddV1 L d 92'°W - L/L 3BVd VO DI.LO313 BIVd E96-EEg-gc ES:o Lg/t'g/ -. r A.- M17 POWER PRODUCTS ::. 1270 J MH2T174 12V7Ah VOLTAn AL 1EiTO heife) V CAAO 7A i - : - ;-• - -S 2 -i L1_ ECTANCY: Em ERGY INSS( - ,• • 3y ! 41 • c • 5'2CF[C EMERGYWOrrmu * ••SJ •_S •:- - S ill- Ul> -SE 770]~QTRUCTION- C S S *SS • MAW. V SHOR70URAOCO HOU S I r,,l AT R A L AK - CF RAT 1 NC Y:. RC: Drnnsions 1 lie rrnna CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE el LISTING No. 7165-0075:210 Page 1 of 1 CATEGORY: Control Unit (Non High-Rise) LISTEE: Fire-Lite Alarms, Inc., One Fire-Lite Place, Northford, CT 06472-1653 Contact: Brian Reynolds (203) 484-7161 FAX (203) 484-7309 DESIGN: Model MS-9050UD addressable fire alarm control unit. Unit consists of one communication loop, two bell circuits, and three relay contact outputs for alarm, trouble and supervisory. Local, auxiliary, remote station, central station and proprietary (protected premise),automatic, manual, water flow and sprinkler supervisory service. Refer to listee's data sheet for detailed product description, operational considerations and required/optional accessories. When required, accessories shall be CSFM listed. RATING: 120 VAC, 60 Hz, 3.0 A Primary, 24 VDC Secondary INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed as an addressable fire alarm control panel for use with separately listed compatible initiating and indicating devices. Refer to listee's Installation Instruction Manual for details. This control unit can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. This control unit meets the requirements of UL-864, 91h Edition Standards. NOTE: For Fire Alarm Verification Feature (delay of fire alarm signal), the maximum Retard/Reset/Restart period shall not exceed 30 seconds. Cert. 07-07-2006 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 16, 2009 Listing Expires June 30, 2010 Authorized By: FRANCIS MATEO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7272-0075:194 Page 1 of 1 CATEGORY: Photoelectric Smoke Detector LISTEE: Fire-Lite Alarms Inc., One Fire-Lite Place, Northford, CT 06472 Contact: Brian Reynolds *(203) 484-7161 FAX (203) 484-7309 DESIGN: Models SD350, SD350T, SD355, SD355T and AD355 photoelectric type smoke detectors. Model SD350T and SD355T has a 135°F supplement integral heat sensor which only assists in a fire situation. The purpose of this thermal circuitry is to increase the sensitivity of the detector. This thermal circuitry is NOT approved for use as a heat detector. Refer to listee's printed data sheet for additional detailed product description and operational considerations. RATING: 24VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed as photoelectric smoke detector for use with separately listed compatible fire alarm control units. All units are suitable for installation inside air duct with a maximum air velocity of 4000 fpm. NOTE: The photoelectric type detectors are generally more effective at detecting slow, smoldering fires which smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding. The ionization type detectors are generally more effective at detecting fast, flaming fires which consume combustible materials rapidly and spread quickly. Sources of these fires may include paper burning in a waste container or a grease fire in the kitchen. *Rev. 05-06-05 BH This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 16, 2009 Listing Expires June 30, 2010 Authorized By: FRANCIS MATEO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING -. BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7150-0075:184 Page 1 of 1 CATEGORY: Boxes/Pull Stations LISTEE: Fire-Lite Alarm Inc., One Fire-Lite Place, Northford CT 06472-1653 Contact: Brian Reynolds *(203) 484-7161 FAX (203) 484-7309 DESIGN: Models BG-12, BG-12S, BG-12NC, BG-12W, BG-12LW, BG-12WP, BG-12LWP, BG-12L, BG-12LX, BG-12LA, BG-12PS, BG-12LSP, BG-12SP, BG-12LR, BG-12LRA, BG-12LAO, BG-12LAOB, BG-12-LO, BG-12LOB, BG-12LPS, BG-12LPSP, BG-12SL, *uTps1 and UT- PS2 fire alarm pull boxes. The BG-12 series is a dual action pull station that has normally open switch contacts. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number and UL label. APPROVAL: Listed as fire alarm pull boxes for use with separately listed compatible fire alarm control units. Models BG-I2WP, BG-12W, BG-12LW and BG-I2LWP are intended for outdoor use when installed with Model WP-10 back box. Models BG-LAOB and BG-12LOB are intended for outdoor use when installed with Model WBB or WP-1 0 back box. XLF: 7150-0028:199 *Rev. 05-06-05 JW This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 16, 2009 Listing Expires June 30, 2010 Authorized By: FRANCIS MATEO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE a] LISTING No 7300-0075:185 Page 1 of 1 CATEGORY: Misc. Devices/Control Unit Accessories LISTEE: Fire-Lite Alarms, Inc., One Fire-Lite Place, Northford, CT 06472-1653 Contact: Brian Reynolds *(203) 484-7161 FAX (203) 484-7309 DESIGN: Models MDF-300, MMF-301, MMF-300, MMF-302, MCF-300 monitor modules; Models CRF-300 and CMF-300 control modules; and MMF-302-6 six zone interface signaling device module. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 15-32VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model designation, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with listee's separately listed electrically compatible fire alarm control units. *Rev. 05-06-05 JW This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 16, 2009 Listing Expires June 30, 2010 Authorized By: FRANCIS MATEO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECHON OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE a] LISTING No. 7125-0785:131 Page 1 of 2 CATEGORY: Fire Alarm Devices for the Hearing-Impaired LISTEE: Wheelock Inc., 273 Branchport Ave., Long Branch NJ 07740 Contact: Deborah Piserchia (732) 433-6001 Fax (732) 222-5607 DESIGN: Models AS-1215, -2415, -1230, -2430, -121575, -241575, -2475 and -24110 audible/strobes for the hearing impaired followed by any three alpha/numeric characters indicating lens orientation, lettering and color. Models AS-1215W, -2415W, -1230W, -2430W, -121575W, -241575W, -2475W and -24110W audible/strobes for the hearing impaired followed by any three alpha/numeric characters indicating lens orientation, lettering and color. These units with suffix -W are for wall mount only. *Models AS-121575W and AS-241575W lens color may be white, red, blue, green, or amber. Models AS-2415C, -2430C, -2475C and -24100C audible/strobes for the hearing impaired followed by two alpha/numeric characters indicating lens lettering, orientation and color. These units are intended for ceiling mount only. Model AH-12, -24, AH-12WP, -24WP audible appliances (no strobe), followed by an alpha or numeric character indicating product color. Model AS-24MCW and AS-24MCC audible/strobe, followed by any two alpha or numeric character indicating lettering and product color. *Lens color may be white, red, blue, green, or amber. Models ASWP-2475W and *AswP..2475C audible/strobe with integral private mode fire/emergency visual signaling for non-hearing impaired applications. Lens color may be white, red, blue, green, and amber. Both models are suitable for outdoor use when mounted on the Model WPBB back box. Models AS-24MCWH, AS-24MCCH, *ASWP.24MCWH and *ASWP24MCCH audible/strobes for the hearing impaired followed by two alpha/numeric characters indicating lens lettering and product color. Units with suffix CH are for ceiling mount only. Units with suffix WH are for wall mount only. *Lens color may be white, red, blue, green, or amber. Refer to the listee's data sheet for detailed product description and operational considerations. RATING: Electrical: 8-17.5/16-33 VDCNFWR Flash Rate: 60 flashes/minute Candela: 15:15cd, 1575:15/75cd, 30:30cd, 75:75cd, 95:95cd, 100:100cd, 110:110cd MCW: Selectable 15cd, 30cd, 75cd, 110cd MCC: Selectable 15cd, 30cd, 75cd, 95cd MCWH: Selectable 135cd, 185cd (65cd, 90cd at -40 C) MCCH: Selectable 115cd, 177cd (50cd, 75cd at-40 C) Listing No. 7125-0785:131 Page 2 of 2 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. Models ASWP-2475W, ASWP- 24MCWH, AS-24MCW and AS-24MCWH are for wall mount only. Models ASWP-2475C, ASWP-24MCCH, AS-24MCCH, AND AS-24MCC are for ceiling mount only. Models with suffix - W or WH are for wall mount only. Models with suffix -c or -CH are for ceiling mount only. MARKING: Listees name, model number, electrical/candela rating, and UL label. APPROVAL: Listed as audible and audible/visual signaling devices suitable for the hearing impaired when used in conjunction with separately listed electrically compatible fire alarm control units. For indoor use only except Models AH-12WP, AH-24WP, *Aswp2475w ASWP-2475C, ASWP-24MCWH, and ASWP-24MCCH audible appliances are suitable for indoor/outdoor. For synchronization, Models AS Series must be used with Model SM-12/24, SMX-12/24, DSM-12124 or DSMX-12/24 sync control module (CSFM Listing No. 7300-0785:132). Refer to listee's Installation Instruction Manual for details. These appliances can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. NOTE: Models AH-12, AH-24, -12WP and -24WP audible devices are not suitable for the hearing impaired applications. *Rev. 10-01-07 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 18,2009 Listing Expires June 30, 2010 Authorized By: FRANCIS MATEO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7161-1384:101 Page 1 of 1 CATEGORY: Cables-Fire Protective Signaling LISTEE: Tappan Wire & Cable, 256 Oak Tree Rd., Tappan NY 10983 Contact: *Chris Durland (845) 353-9000 FAX (845) 353-9315 DESIGN: Types FPL, FPLP and FPLR power-limited fire protective signaling cables. Refer to listee's data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, NEC Article 760, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, product designation and UL label. APPROVAL: Listed as power-limited fire protective signaling cables. *Rev. 04-20-2005 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources. Date Issued: JUNE 26, 2009 Listing Expires June 30, 2010 Authorized By: FRANCIS MATEO, Program Coordinator Fire Engineering Division rfl t000o\ Copyright 2009 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 23, 2009 to MICHAEL CARLIN of MC SYSTEMS. No other reproduction or transmission in any form permitted without written er 11 report unauthorized use, contact licensing@nfpa.org. FUNDAMENTALS OF FIRE ALARM SYSTEMS 72-33 FIRE ALARM SYSTEM RECORD OF COMPLETION To be completed by the system installation contractor at the time of system acceptance and approval. 1. PROTECTED PROPERTY INFORMATION Name of property: ->tJJ4)'--' Address: 1 JAcy -?Jtcc-t C4sc :%- Description of property: L. t0Jsj1e'A$ (pA4i~ Occupancy type: Name of property representative: (4*oltr' Address: Phone: - Fax: E-mail: Authority having jurisdiction over this property: Jrt Phone: — Fax: E-mail: FIRE ALARM SYSTEM INSTALLATION, SERVICE, AND TESTING INFORMATION Installation contractor for this equipment: 1P'4.{ Address: CA - Phone: 1 i')OO Fax: E-mail: Service organization for this equipment: Address: I T2Ai4_ /-(.41V4 Phone: 1-'B 0' - g4.ç __5?tt Fax: E-mail: Location of as-built drawings: Location of historical test reports: Location of system operation and maintenance manuals: ?4i-C.I. A contract for test and inspection in accordance with NFPA standards is in effect as of t Contracted testing company: A.9 )At4/ZAA Address: Phone: 1-40 _ .31O Fax: E-mail: Contract expires: 4.1_(1.T3 Contract number: ltk Frequency of routine inspections: 3. TYPE OF FIRE ALARM SYSTEM OR SER\ NFPA 72 Chapter Reference of System Type: Name of organization receiving alarm signals with phone numbers (if applicable): Alarm: 'A.\_ANt Phone: ?F3t 31 Supervisory: Attlza4 Phone: _ 3ft.floó Trouble: %1_ALAfV1 Phone:1C Entity to which alarms are retransmitted: Phone: Method of retransmission of alarms to that organization or location: © 2007 National Fire Protection Association NFPA 72 (p. 1 of 5) FIGURE 4.5.2.1 Record of Completion. 2007 Edition Copyright 2009 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 23, 2009 to MICHAEL CARLIN of MC SYSTEMS. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact Iicensing@nfpa.org. 72-34 NATIONAL FIRE ALARM CODE TYPE OF FIRE ALARM SYSTEM OR SERVICE (continued) If Chapter 8, note the means of transmission from the protected premises to the central station: I$Qigital alarm communicator U McCulloh U Multiplex U 2-way radio U 1-way radio U N/A If Chapter 9, note the type of connection: U Local energy U Shunt 3.1 System Software Operating system (executive) software revision level: 0 1. Site-specific software revision date: 1 -&U_ t Revision completed by: SIGNALING LINE CIRCUITS Characteristics of sinaling line circuits connected to this system (see NFPA 72, Table 6.6.1): Quantity: Style:- Class: ALARM-INITIATING DEVICES AND CIRCUITS Characteristics of initiating device circuits connected to this system (see NFPA 72, Table 6.5).- Quantity: Style: _____________ Class: 5.1 Manual Initiating Devices 5.1.1 Manual Pull Stations Number of manual pull stations: Type of devices: ddressable U Conventional U Coded U Transmitter U N/A 5.2 Automatic Initiating Devices 5.2.1 Area Smoke Detectors Number of smoke detectors: Type of coverage: U Complete area[]('Partial area U Nonrequired partial area U N/A Type of devices: Fl&ddressable U Conventional U Coded U Transmitter U N/A Type of smoke detector sensing technology: U Ionization thotoelectric 5.2.2 Duct Smoke Detectors Number of duct smoke detectors: Type of coverage: Type of devices: U Addressable U Conventional U Coded U Transmitter U N/A Type of smoke detector sensing technology: U Ionization U Photoelectric 5.2.3 Heat Detectors Number of heat detectors: Type of coverage: U Complete area U Partial area U Nonrequired partial area U N/A Type of devices: U Addressable U Conventional U Coded U Transmitter U N/A 5.2.4 Sprinkler Waterfiow Detectors Number of waterflow detectors: Type of devices Addressable U Conventional U Coded U Transmitter U N/A 5.2.5 Alarm Verification Number of devices subject to alarm verification: Alarm verification on this system is: U Enabled U Disabled U Set for seconds © 2007 National Fire Protection Association NFPA 72(p.2015) FIGURE 4.5.2.1 Continued NFIP 2007 Edition Copyright 2009 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 23, 2009 to MICHAEL CARLIN of MC SYSTEMS. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org. FUNDAMENTALS OF FIRE ALARM SYSTEMS 72-35 SUPERVISORY SIGNAL-INITIATING DEVICES AND CIRCUITS 6.1 Sprinkler System Number of valve supervisory switches:_____ Type of devices: Addressable U Conventional U Coded U Transmitter U N/A 6.2 Fire Pump Type of fire pump: U Electric U Diesel Type of fire pump supervisory devices: U Addressable U Conventional U Coded U Transmitter Fire Pump Functions Supervised U Fire pump power U Fire pump running U Fire pump phase reversal U Selector switch not in auto U Engine or control panel trouble U Low fuel Other: 6.3 Engine-Driven Generator Type of generator supervisory devices: U Addressable U Conventional U Coded U Transmitter .(U N/A U Engine or control panel trouble U Generator running U Selector switch not in auto U Low fuel Other: ANNUNCIATORS 7.1 Annunciator 1 U Local U Remote Type: U Addressable U Directory U Graphic N/A Location: 7.2 Annunciator 2 U Local U Remote Type: U Addressable U Directory U Graphic "4, N/A Location: 7.3 Annunciator 3 U Local U Remote Type: U Addressable U Directory U Graphic N/A Location: ALARM NOTIFICATION DEVICES AND CIRCUITS 8.1 Emergency Voice Alarm Service Number of single voice alarm channels: Number of multiple voice alarm channels: Number of speakers: Number of speaker zones: 8.2 Telephone Jacks Number of telephone jacks installed: Number of telephone handsets stored on Type of telephone system installed: U Electrically powered 'U Sound powered U N/A 8.3 Nonvoice Audible System Characteristics of notification device circuits connected to this system (see NFPA 72, Table 6.5): Quantity: Style: Class: © 2007 National Fire Protection Association NFPA 72 (p.3 of 5) FIGURE 4.5.2.1 Continued 2007 Edition Ott Copyright 2009 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 23, 2009 to MICHAEL CARLIN of MC SYSTEMS. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensiny@nfpa.org. 72-36 NATIONAL FIRE ALARM CODE ALARM NOTIFICATION DEVICES AND CIRCUITS (continued) 8.4 Types and Quantities of Nonvoice Notification Appliances Installed Bells: With visual device: Horns: With visual device: Chimes: With visual device: Bells: With visual device: Visual devices without audible devices: _______________ Other (describe): EMERGENCY CONTROL FUNCTIONS ACTIVATED ID Hold-open door releasing devices U Smoke management or smoke control D Door unlocking D Elevator recall 0 Other SYSTEM POWER SUPPLY 10.1 Primary Power Nominal voltage Amps Overcurrent protection: Type Amps Location (of primary supply panelboard): Disconnecting means location: ___________________________________________________________________________________ 10.2 Secondary Power Location: rs()- Type: SfAj!!L Or Nominal voltage: Current rating: IUS Number of standby batteries: 7. Amp hour rating: Location of emergency generator: Location of fuel storage: Calculated capacity of secondary power to drive the system In standby mode: ; 1. 7- In alarm mode: 11. RECORD OF SYSTEM INSTALLATION Fill out after all installation is complete and wiring has been checked for opens, shorts, ground faults, and improper branching, but before conducting operational acceptance tests. The system has been installed in accordance with the following NFPA standards: (Note any or all that apply.) $ NFPA 72 -NFPA 70, National Electrical Code, Article 760 Manufacturer's published instructions LI Other (please specify): System deviations from referenced NFPA standards: Signed: ffr_— Printed name: Date: £1 (7 t Organization: Title: 9124jC.4"cL Phone: t1t4JlrX 6'z6 RECORD OF SYSTEM OPERATION All operational features and functions of this system were tested by or in the presence of the signer shown below, on the date shown below, and were found to be operating properly in accordance with the requirements of. NFPA 72 NFPA 70, National Electrical Code, Article 760 -..Manufacturer's published instructions LI Other (please specify): O Documentati1jl in accordance with Inspection and Testing Form (Figure 10.6.2.3) is attached Signed: Printed name: t.C414C_ Date: (1(1 Le Organization: Title: Vrzj'ttt Phone: La © 2007 National Fire Protection Association NFPA 72 (P.4 of 5) FIGURE 4.5.2.1 Continued N OP 2007 Edition Copyright 2009 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on November 23, 2009 to MICHAEL CARLIN of MC SYSTEMS. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org. FUNDAMENTALS OF FIRE ALARM SYSTEMS 72-37 13. CERTIFICATIONS AND APPROVALS 13.1 System Installation Contractor This system as specified herein has been installed and tested according to all NFPA standards cited herein. Signed: Printed name: C4 Date: cl .r'(c Organization: 54 Title: ________________ Phone {2 13.2 System Service Contractor This system as specified herein has been installed and tested according to all NFPA standards cited herein. Signed: Printed name: Date: Organization: Title: Phone: 13.3 Central Station This system as specified herein will be monitored according to all NFPA standards cited herein. Signed: ____________________________ Printed name: Date: Organization: Title: Phone: 13.4 Property Representative I accept this system as having been installed and tested to its specifications and all NFPA standards cited herein. Signed: Printed name: Date: Organization: Title: Phone: 13.5 Authority Having Jurisdiction I have witnessed a satisfactory acceptance test of this system and find it to be installed and operating properly in accordance with its approved plans and specifications, its approved sequence of operations, and with all NFPA standards cited herein. S Signed: " Printed name: _______________________ Date: Organization: Title: Phone: © 2007 National Fire Protection Association NFPA 72 (p. 5 of 5) FIGURE 4.5.2.1 Continued 2007 Edition