HomeMy WebLinkAbout2270 CAMINO VIDA ROBLE; L; 87-624; PermitDEVELOPMENT PROCESSING SERVICES DIVISION
2075 LAS PALMAS DRIVE
CARLSBAD, CA 92009-4859
(619)438-1161
MISCELLANEOUS FEE RECEIPT
Applicant Please Print And Fill In Shaded Area Only
i ">1 5
PLAN ID NO.
ZIP
0010 11/16 0101 OSMisc
VALIDATION AREA
110-00
y^>. , / , / /AADDRESS /£T6 1 C^esf //
ZIP
NO
r
. 5 0
BUSINESS
LICENSE NO.
FRTMATPR VAIIIATIflM
001-810-00^0-8821
IF THE APPLICANT TAKES NO ACTION
WITHIN 180 DAYS, PLAN CHECK FEES
WILL BE FORFEITED.
2 1987 ENERGY CALCS
FOR NON RESIDENTIAL BLDGS
DESCRIPTION OF WORK 2 STRUCTURAL CALCS
2 SOILS REPORTS
2 SELF ADDRESSED ENVELOPES
DATE GIVEN/
SENT TO APPLICANT
DATF
,(3NT/«3T PERSON LA COSTA LETTER
*t>t)RE8S/&t SCHOOL FEE FORM
P & E CORRECTIONS LIST
CERTIFICATE OF OCCUPANCY
APPLICANT'S SIGNA DATE
White - File Yellow - Applicant Pink - Finance Gold - Assessor
DEVELOPMENTAL
SERVICES
2075 LAS PALMAS DRIVE
CARLSBAD, CALIFORNIA 92008
Citp of Carte&ab
Date:
To:
June 2, 1988
Mark Byerlee
1501 W. Uth
Escondido, CA
PC#: 87-624 Dated: II/16/87
2270 Camino Vida Roble
92025
Subject: Plan Check Expiration
Dear Sir:
The plan check for your project at:
has become null and void due to limitation of time on: May 17, 1988
2270 Camino Vida Roble
The provisions of Section 304 (c) of the Uniform Building Code states:
Sec. 304 (c) Expiration of Plan Check. Applications for which no permit is
issued within 180 days following the date of application shall expire by
limitation and plans submitted for checking may thereafter be returned to the
applicant or destroyed by the Building Official. The Building Official may
extend the time for action by the applicant for a period not exceeding 130
days upon written request by the applicant showing that circumstances beyond
the control of the applicant have prevented action from being taken. In
order to renew action on an application after expiration, the applicant
shall resubmit plans and pay a new plan check fee.
We will hold your plans for 10 days at our office for you to pick up, after which
time they will be destroyed.
If you have any questions please contact the Carlsbad Building Department at
438-1161.
Very truly yours,
Martin .Orenyak
Buildinq Official
M0:hh
DEVELOPMENTAL
SERVICES
BUILDING DEPARTMENT
2075 LAS PALMAS DRIVE
CARLSBAD. CALIFORNIA 92008-1989
TELEPHONE (619) 438-1161
Date:
To:Mark Byerlee
1501 W. llth
Escondido, CA 92025
87-624 Dated
2270 Camino Vida Roble
November 1987
Subject: Plan Check Expiration
Our records indicate that you have not obtained your building permit for which
you filed an application on the date shown above.
The provisions of Section 304(c) of the Uniform Building Code state:
Sec. 304(c) Expiration of Plan Check. Applications for which no permit is
issued within 180 days following the date of application shall expire by
limitation and plans submitted for checking may thereafter be returned to the
applicant or destroyed by the Building Official. The Building Official may
extend the time for action by the applicant for a period not exceeding 180
days upon written request by the applicant showing that circumstances beyond
the control of the applicant have prevented action from being taken. In
order to renew action on an application after expiration, the applicant shall
resubmit plans and pay a new plan check fee.
For your convenience, please check the appropriate box below indicating your
intentions and return this letter to the address above.
Project abandoned. I will pick up plans in 10 days.
Signature Date
Project abandoned, plans may be destroyed.
Signature Date
Maximum 180-day time extension requested for the following reason:
Signature Date
If you have any questions, please contact the Carlsbad Building Department at
438-1161.
MARTIN
Building Officil
ESGIL CORPORATION
932O CHESAPEAKE DR., SUITE 2O8
SAN DIEGO, CA 92123
(619)560-1468
S fDATE: \'£A OOl » { ; [APPLICANT
JURISDICTION: \/. ^VO _ [jPLAN CHECKER^ . _ QFILE COPY
PLAN CHECK NO: _ P /"" fc'C 4~ SET: 3J— _ Dups
-, __ .
PROJECT ADDRESS: ~
PROJECT NAME :
The plans transmitted herewith have been corrected where
necessary and substantially comply with the jurisdiction1s
building codes.
The plans transmitted herewith will substantially comply
with the jurisdiction's building codes when minor deficien-
cies identified are resolved and
checked by building department staff.
The plans transmitted herewith have significant deficiencies
identified on the enclosed check list and should be corrected
and resubmitted for a complete recheck.
The check list transmitted herewith is for your information.
The plans are being held at Esgil Corp. until corrected
plans are submitted for recheck.
The applicant's copy of the check list is enclosed for the
jurisdiction to return to the applicant contact person.
The applicant's copy of the check list has been sent to:
\e50\
f/. Esgil staff did not advise the applicant contact person that
plan check has been completed.
|| Esgil staff did advise applicant that the plan check has
been completed. Person contacted:
Date contacted: Telephone #_
REMARKS:
By:NjiW\ telUSHlVfri Enclosures :
ESGIL CORPORATION
30)8^7
rrfl L, "PIP ma
•Sr)vvU?T ^ TWn s :
iv - tovwr u<>cdr ot=
- SvtoP mLg
OF
Irovl.
Pi
OX2.
CA-yurQp-r
TO
+O
So
ESGIL CORPORATION
9320 CHESAPEAKE DR., SUITE 2O8
SAN DIEGO. CA 92123
(619) 56O-14-68
DATE:
JURISDICTION:
PLAN CHECK NO:
PROJECT ADDRESS:
PROJECT NAME:
^TTJURISDICTION"PLAN CHECKER
QFILE COPY
QUPS
_ QDESIGNER
D The plans transmitted herewith have been corrected where
necessary and substantially comply with the jurisdiction's
D
D
D
building codes. - - •
The plans transmitted herewith will substantially comply
with the jurisdiction's building codes when minor deficien-
cies identified _ are resolved and
checked by building department staff.
I* The plans transmitted herewith have significant deficiencies
identified on the enclosed check list and should be corrected
and resubmitted for a complete recheck.
The check list transmitted herewith is for your information.
The plans are being held at Esgil Corp. until corrected
plans are submitted for recheck.
The applicant's copy of the check list is enclosed for the
jurisdiction to return to the applicant contact person.
The applicant's copy of the check list has been sent to:
1-5*01
Esgil staff did not advise the applicant contact person that
plan check has been completed.
Esgil staff did advise applicant that the plan check has
been completed. Person contacted: _
Date contacted
REMARKS:
Telephone #
By :Enclosures :
ESGIL CORPORATION
PLEASE REAP
JURISDICTION:
TO:
PROJECT DATA
OCCUPANCY.:
BUILDING .USE
;CXPE OF
ACTUAL AREA:
AREA;
STORIES:
HECG8X*
SPRINKLERS:
OCCOPAXt IJOAD:
KEKAKKS:
PIAK SHFTTT
TENANT IMPROVEMENT
Date plans received by jurisdiction: Hi tU
Data plans received by Esgil Corp.; U \\\ \ O (
Date initial plan check conpleted:
Applicant contact person:
. 4.30,
Plan check is limited to technical requirements
contained in the Uniform Building Code, Uniform
Plumbing Coda, Uniform Mechanical Code, National
Electrical Code and state laws regulating energy
conservation, noise attenuation and access for
the handicapped. The plan check is based on .
regulations enforced by the Building Inspection
Department. You may have other corrections
based on laws and ordinances enforced by the
Planning Department, Engineering Department or
other departments.
Present California law mandates that
construction comply with Title 1U and the
applicable model code editions adopted, .with or
without changes, by the various state agencies
authorized to propose, building regulations for
enforcement at the local level. Code sections
cited are based on the 1982 UBC;
Hie above regulations apply to construction,
regardless of the code editions adopted by
ordinance at the local level.
She circled items listed need clarification,
modification or change. All items have to be
satisfied before the plans will he in
conforxarice with the cited codes and
regulations. Per Sec. 303 .^c), 1982 Unifora
Building Code, the approval of the plans does
not pernit the violation of any state, county or
city lav.
vou submit the revised plans.
NOTE: PACE NUMBERS ASZ WOT IH SEQUEHCK AS PACES HAVING »O HEMS HEEDING CORRECTION WERE DELETED.
List Ho. 50, TENANT IMPROVEMENT WITHOUT SPECIFIC ENERGY ZONE DATA OR POLICY SUPPLEMENTS
2/10/87
please make all correcclona on the
original tracings and lubnit two
new'sets of prints, and any original
plan sets that may have been returned to
you by the jurisdictions, to:
Corporation, 9320 Chesapeake
Drive, Sul-te 209, San Diego, CA
92123, (619)560-1'<6B.
Please make all corrections on the
original tracings and submit two new
sets of prints, and any original plan
sets that may have been returned to
you by the jurisdiction, to:
The jurisdiction's building department.
The responsible designer is required
to sign each sheet of the plans. -A—
io<«d *,B6hib«.afc «ff Engineer
•hanrtac to *in >"*--•*?* rM—tt"
Provide the correct address and suite
number of tenant space on the plans.
Section 302.
Provide a note on the plan indicating
the previous use of the tenant space
or building being remodeled. Section
302.
When the character of the occupancy
or use changes within a building, the
building must be made to comply with
current Building Code requirements
for the new occupancy. Please provide
conplete details to show the building .
will comply. Section 502.
VBC Section 304 requires the BuildingOfficial to determine the total value
of all construction work proposed under
this permit. The value shall include
all finish work, painting, roofing,
electrical, plumbing, heating, air
conditioning, elevator, fire exting-
uishing systems and any other perma-
nent equipment. Please provide a signed
copy of the designer's or contractor's
construction cost estimate of all work
proposed.
Provide a plot plan showing the distances
from the building to the property lines
and the location of tenant space (or
remodel) within the building.
On the first sheet of the plans indicate!
Type of construction of tha existing
building, present and proposed occupancy
classifications of the remodel area
and the occupant load of the remodel
areas and total building area.
Specify on the plan title sheet the
Building Code Edition used for the
design of the proposed work.
Provide a fully dimensioned floor plan
showing the size and use of all rooms
or areas within *s*> «pnr*» s»in^ fnprm/a
QC altered. Draw the plan to scale
and indicate the scale on the plan.
Indicate the use of all spaces adjacent
to'the area being remodeled or improved.
Show any existing fire rated area sep-
aration walls, occupancy separation
walls, shafts or rated corridors-^
Identify and provide const: Puctionde-
tails for proposed new fire rated walls.
Specify on the plans the fire ratings
of assemblies to protect proposed open-
ings in existing or new fire walls.
Identify existing walls to be removed,existing walls to remain and proposed
new walls. Identify bearing walls,
non-bearing walls, and shear walls.
Provide a section view of all new interior
partitions. Show:
(a) Type, size and spacing of studs.
Indicate gauge for metal studs.
Specify manufacturer and approval
number or indicate "to be ICBOapproved",
(b) Method of attaching top and
bottom plates to structure.
(NOTE: Top or-, partition must
be secured to roof or floor
framing, unless suspended ceiling
has been designed for partitionlateral load).
(c) Wall sheathing material and
details of attachment. (Size
and spacing of fasteners).
(d) Height of partition and suspended
ceiling.
Provide.notes and/or details to show that
the floor and wall finish in toilet rooms
are surfaced with a smooth hard non-absor-
bent material extending five inches up
the wall. Similar surfacing shall be pro-
vided on the walls from the floor to *
a height of 4 feet around urinals and
within water closet compartments.
To
Hote on the plans: "All interior finish**
inuat comply with Chapter 42 of the
UDC". Specify 'class flame
• pread rating (minimum) tor /^.
Lateral bracing for suspended cell ing
must be provided. (UOC Table 23-J)
Where ceiling loads are leas than 5
?SF and not supporting interior part-
itions, ceiling bracing shall be pro-
vided by four Ho. 12 gauge wires secured
to the main runner within 2 inches
of the cross runner Intersection and
splayed 90" from each other at an angle
not exceeding 45* from the plane of
the ceiling. These horizontal restraint
points shall be placed 12 feet o.c.
in both directions with the first point
within 4 feet of each wall. Attachment
of restraint wires to the structure
above shall be adequate for the load
imposed.
Draft stop any suspended ceiling in
wood frame floor construction every
1,000 sq. ft. and in attics of com-
bustible construction every 3,000 sq.
ft. The maximum distance allowed between
draft stops is GO feet. Section 2516(fJ.
The tenant: space and new and/or existing
facilities serving the remodeled area
must be accessible to and functional
for the physically handicapped. See
the attached correction sheet. Title
24, Part 2.
Show the exit sign locations; show
any required directional exit signs.
Section 3314.
Boons with more than 10 occupants may
.have pni exit through one adjoining
room. Revise exits to comply. Section
330:(e>
Two complying exits are required froa
~Tftg A-l2.t=1\ Exits must be, and main-
tain, a distance apart of at least
1/2 the maximum diagonal dimension
of the area served by the exits.
Section 3303
Assembly roocis with more 'than SO
occupants shall not have a lock or
latch on, exit doors unless they are
-equipped with panic hardware. Section
3318.
Hot* on the plansi 'All exits ar«
to be oponable from Inside without the
use of a Jtey or special knowl edqe".
In lieu of the above. In a Croup 0
occupancy, you may not« "Provide a
sign on or near the exit doors
reading THIS DOOR TO REMAIN UN-
LOCKED OURIMC BUSINESS HOURS'.
Required exit doorways •hall be not
less than .*»{ Inches In width and not
less than 6 feet - S inches Jn height
Section ))04|c>. S
Exit doors shall swing in the direction
of cxic travel (occupant load exceeds
50). Section 3?04(b).
Show the locations of existing exits
from the building and show the path
of travel fron the remodel area to
the existing exits.
Corridors must provide continuous pro-
tection to the exterior of the building.
Interruptions by intervening room is
not permitted. Foyers, lobbies or
reception rooms constructed as required
for corridors are not considered inter-
vening rooms.
Show exit corridors as 44 inches vide
minimum. Deadend corridors are limited,
to 20 feet when more than one exit
. is required from the corridor. Section
3305.
Provide one-hour construction details
for all corridor walls and ceilings
serving an occupant load of 30 or more
Identify all rated corridors. Halls
oC reception rooms and lobbies which
are included within protected corrido-s
lust have walls and ceilings constructed
as required for corridors.
* *Protect all interior openings in corridor
vails and ceilings. Door and frame must
be labeled 20-ainute smoke and draft
control assembly with self-closers
or automatic closers with smoke detectors:
Section 3305{h). Claaing must be 1/4
inch-thick wired glass installed insteel frames and cannot exceed 25
percent of the common wall area. Section3305(h)2. ««"on
Show the location of.fire dampers.
Provide fire dampers at duct pene-
trations of fire-rated occupancy and
area separations, shafts and corridor
walls and ceilings. Section OOG(j).
Xf building exceeds two stories show
corridor is separated from elevator shaft.
Sections 3304(g)(h) and 1706(a)(b). (See
I.C.B.O. interpretation).
s
UJ
' f~ *• •
/&*..! T'£<* '"'3 1 J
JURISDICTION:
ELECTRICAL FLAK CORRECTION SHEET
DATE:
FLAN CHECK HOKBER;
}£ Submit complete electrical plans and
specifications .
2^ Submit p Ian showing location of al 1
services.
ytf. Submit complete one-line diagram of
service and feeders.
V. Indicate the grounding system to be
installed for building service.
X. Indicate ampere interrupting capacities
(AIC) of service and subservice
equipment. NEC 230-65/110-9.
6£ Indicate sizes of fuses and/ or circuit
breakers .
~jf. Indicate fuse symbols to show fault
currents are limited to 10,000 amps on
branch circuits.
If fuses are not used to limit fault
currents on branch circuits to 10,000
amps, specify method to be used.
Submit plan shoving location of all
switchboards .
10. Indicate dimension of switchboards and
control panels rated 1200 amperes or
more. NEC 110-16(c).
11. Submit plan showing location of all
transformers .
. Indicate the grounding system to be
installed for transformers. NEC 250-
26(c).
FLAN CHECKER:
VOLIJB WAGGONER
OWEN DILLON
Provide overcurrent protection on the
secondary side of transformers. NEC 240-
21/384- 16(d).
Submit plan showing location of all
panels .
l5.J Submit/panels schedules \c //
, Specify conduit and wire sizes.
Specify aluminum or copper conductors and
type of insulation.
Show approximate length of feeders.
". Specify electrode conductor size and type
wire, (aluminum or copper)
Submit electrical load calculations.
Indicate existing service size.
22. Indicate existing building load.
&. Indicate new additional loads.
. Indicate wiring method.
. Show exit signs on the electrical
lighting plan. Note: Power for exit
lights and emergency lighting must
conform to the 1985 UBC Sections 3313 and
3314.
ze.Provide receptacle(s) within 25' of the
roof mounted A/C units. UMC Section 509.
27 J Provide multiple switch lighting controls
per CAC, Title 24, 2-5319.
Any questions on electrical please contact the plan checker shown above, at Esgil Corporation at (619)
560-1468. Thank you.
08/31/87
Prepared byi
v3lW\
PLAN CHECK NO.
VALUATION AND PLAN CHECK FEE
Q Sldg.
D Esgil
- IT
BUILDING ADDRESS "2-"Z.~7Q
APPLICANT/CONTACT
BUILDING OCCUPANCY
TYPE Or CONSTRUCTION V
VAX> UlQ*?
( fW-T- OP=|( /' \
, — So iTS" L )
"'2-
gl^LOST^ PHONE NO. 4-fl^ *S-4-g.
DESIGNER PHONE
CONTRACTOR PHONE
BUILDING PORTION
Of^ce-TH
EUILDING AREA VALUATION
MULTIPLIER
1
1
1^-5^ i1 i 2, 16 'S"0
1 1
1 i
Air Conditioning
Commercial
Residential
Res. or Comm.
Fire Sorir.klers
e
@
@
VALUE
- -24-nitp
ii
Total Value ^i i c?
Fee Adjusted To Reflect Q Energy Regulations (fee x 1.1)
Q Handicapped Regulations (Tee x 1.065)
Building Permit Fee S - 5? ' O <^
PUn Chech Fee $ f G "3 • O O
COM i^VO Q v t~1
g \v=
e/4/az
0)
(DQ
CQ
-Q
<Us
.2
1
OJ
(0Q
CQ
•o
0)£
.£
CD
0)
ra
Q
CO
"O
V5o
V
D D
D D
El/D D
D D
D D
D D
n n
n n
raf n n
n n
n n
n n
a n
D n
ENGINEERING CHECKLIST
LEGEND
Date:
Plan Check No.
Project Address: 2270
Project Name : ~TH
Field Check Date:
V/£>&
Item Complete
Item Incomplete
Your Action
- Needs
1,2,3
By:
Number in circle
indicates plancheck
number that deficiency
was identified
LEGAL REQUIREMENTS
Site Plan
1. Provide a fully dimensioned site plan drawn to scale. Show: North
arrow, property lines, easements, existing and proposed
structures, streets, existing street improvements, right-of-way
width and dimensioned setbacks.
2. Show on Site Plan: Finish floor elevations, elevations of finish
grade adjacent to building, existing topographical lines, existing
and proposed slopes, driveway and percent (%) grade and drainage
patterns.
3. Provide legal description of property.
4. Provide assessor's parcel number.
PERMITS REQUIRED
Grading
5 Grading permit required. (Separate submittal to Engineering
Department required for Grading Permit).
Grading plans in plan check PE .
Need the following completed prior to building permit issuance:
A. Grading plans signed.
B. Grading permit issued.
C. Grading completed.
D. Certification letter and compaction reports submitted.
E. Grading inspected and permit signed off by City Inspector.
Right-of-Way Permit required for work in public right-of-way
(e.g., driveway approach, sidewalk, connection to water main,
etc).
Industrial Waste Permit application required. To be filled out
completely and returned to Development Processing.
FEES REQUIRED
D
D D
D D
D D
D D
D
REMARKS:
>( f.
10. Park-in-Lieu fees required.
Quadrant: Fee Per Unit:
11. Traffic impact fee required.
Fee Per Unit: ——^ , Total Fee:
, Total Fee
12. Bridge and Thoroughfare fee required
Fee Per Unit: •— , Total Fee:
13. Public facilities fee required.
14. Facilities management fee required. Fee:
15. Additional EDU's required:
Sewer connection fee:
16. Sewer lateral required:
Sewer permit no.
..
O.K. to iss Date:
If you have any questions about any of the above items identified on this plan
check, please call the Development Processing Department at 438-1161.
V
(TJa
O
(TJ
O
0)*->
(D
O
PLANNING CHECKLIST
CD
5
.£
01or
Xm
5
.2
vo:
CO
V
^- M m^t ^t =tt
u u uO. D. Q.
n n n
n n n
n n n
n n n
D n n
Plan Check No.Address 2270 Cftmtw
Type of Project and Use
Zone P-^/yi
Setback: Front
Facilities Management Zone £>
School District: San Dieguito
Carlsbad
Discretionary Action Required
Environmental Required
Landscape Plan Required
Comments
Use Allowed? YES
Side A<//l- Rear
NO
Encinitas
Coastal Permit Required
Additional Comments
JL
YES
YES
YES
San Marcos
NO y\
NO
NO
YES NO
Type
OK TO IS DATE -&?
CARLSBAD, CA 92006
TELEPHONE
(619) 931-2121
PROJECT (A I fffi6
ARCHITECT MA£fC
OWNER / A'/ ff?iP *
OCCUPANCY O-2L
13(SPRINKLERED XjENA
F//?£ DEPARTMENT
PLAN CHECK REPORT
?A^/4 L A.O«S Annqess 22 7^ ( A^
^/ A ^-A C> i ADDRESS .7.27^ o'b^u*
CONST V /W TOTAL SO. FT. / 33/p
/4)d- y/7
PAGE1 OF_j_
APPROVED ^ /
DISAPPROVED
PLANCHECK#
v\ ^Rt^^Ki
PHONE ^^9-^2.y
' ^'/W ^HONE
STORIES /
APPROVAL OF PLANS IS PREDICATED ON CONFORMING
TO THE FOLLOWING CONDITIONS AND/OR MAKING
THE FOLLOWING CORRECTIONS:
13.
PLANS, SPECIFICATIONS, AND PERMITS
Provide one copy of: floor plart(s); site plan; sheets =
Provide two site plans showing the location of all existing fire hydrants within 200 feet of the project.
Provide specifications for the following: :
Permits are required for the Installation of all fire protection systems (Sprinklers, stand pipes, dry chemical, halon,
COi, alarms, hydrants). Plan must be approved by the fire department prior to installation.
The business owner shall complete a building information letter and return It to the fire department.
FIRE PROTECTION SYSTEMS AND EQUIPMENT
The following fire protection systems are require;
D Automatic fire sprinklers (Design Criteria: t
D Dry Chemical, Halon, CO» (Location:
D Stand Pipes (Type: i
$QilU —-/•%*fiJFft*
D Fire Alarm (Type/Location: ' ' " - )
Flje Extinguisher Requirements: ~~2 /\s\Qna,2A rated ABC extinguisher for each 3 QUO sq. ft. or portion thereof with a travel distance to the nearest
extinguisher not to exceed 75 feet of travel.
D An extinguisher with a minimum rating of to be located:
D Othar
8. Additional fire hydrant(s) shall be provided _
EXITS
Exit doors shall be openable from the Inside without the use of a key or any special knowledge or effort.
A sign stating, " This door to remain unlocked during business hours" shah be placed above the main exit and
doors ,
EXIT signs (6" x W letters) shall be placed over all required exits and directional signs located as necessary to
clearly indicate the location of exit doors.
GENERAL
Storage, dispensing or use of any flammable or combustible liquids, flammable liquids, flammable gases and
hazardous chemicals shall comply with Uniform Fire Code.
Bulldlng(s) not approved for high piled combustible stock. Storage In closely packed piles shall not exceed 15 feet
In height, 12 feet on pallets or In racks and 6 feet for tires, plastics and some flammable liquids. If high stock pil-
ing Is to be done, comply with Uniform Fire Code, Article 81.
14. Additional Requirements.
i
//
.15. Comply with regulations on attached sheet(s).
Mm Examiner
Report mailed to architect Met with to Plans
. ™,L.l.-" '"""""'SmBIBf ~ "" " —* r~TT"^~;l7"*:" *"•*• T'-1^ °r*l>'il'!Bpr«|i
2560 ORION WAY Clt? Of
3A 92008 PAGE1 OF
TELEPHONE HUE OEMflTMEWr
(619)931-2121
DISAPPROVED
PLAN CHECK REPORT
APPROVED
PLANCHECK#
: ADDRESS t?^*
ARCHITECT /TMAte ^^f^L^ ADDRESS X*" u/*rtt pHQNE ' W9 f tft 7
OWNER . ADDRESS PHONE
OCCUPANCY _1_ CONST. f<*t TOTAL SO. FT. STORIES
VSPRINKLERED^ TENANT IMP.
APPROVAL OF PLANS IS PREDICATED ON CONFORMING
TO THE FOLLOWING CONDITIONS AND/OR MAKING
THE FOLLOWING CORRECTIONS:
PLANS, SPECIFICATIONS, AND PERMITS
1. Provide one copy of: floor plan{s); site plan; sheets
2. Provide two site plans showing the location of all existing fire hydrants within 200 feet of the project.
3. Provide specifications for the following: ;
X 4. Permits are required for the installation of all fire protection systems (sprinklers, stand pipes, dry chemical, halon,
COa, alarms, hydrants). Plan must be approved by the fire department prior to installation.
* X 5. The business owner shall complete a building Information letter and return it to the fire department.
FIRE PROTECTION SYSTEMS AND EQUIPMENT
^ 6. The following fire protection systems are required:
B Automatic fire sprinklers (Design Criteria:
D Dry Chemical, Halon.CQj (Location: , ; ;__)
D Stand Pipes (Type: ',..... )
D Fire Alarm (Type/Location: '" ; )
Fire Extinguisher Requirements: ^
;d One 2A rated ABC extinguisher for each.2^^^_ sq. ft. or portion thereof with a travel distance to the nearest
extinguisher not to exceed 75 feet oftravel.
D An extinguisher with a minimum rating of to be located: ;
i6 Other fi-fifttn/xJ
Additional fire hydrants) shall be provided
EXITS
Exit doors shall be openable from the Inside without the use of a key or any special knowledge or effort.
A sign stating, " This door to remain unlocked during business hours" shall be placed above the main exit and
doors _ . _
/' 11. EXIT signs (6" x 'A" letters) shall be placed overall required exits and directional signs located as necessary to
clearly indicate the location of exit doors.
GENERAL
7^ 13 Storage, dispensing or use of any flammable or combustible liquids, flammable liquids, flammable gases and
hazardous chemicals shall comply with Uniform Fire Code,
Bulldlng(s) not approved for high plied combustible stock. Storage In closely packed piles shall not exceed 15 feet
In height, 12 feet on pallets or In racks and 6 feet for tires, plastics and some flammable liquids. If high stock pil-
ing is to be done, comply with Uniform Fire Code, Article 81.
V- is
14. Additional Requirements.
.15. Comply with regulations on attached sheet(s)^
Ptan Examiner—^ : \ l.^rty?
Report mailed to architect -^^1__ Met with • ; . N • Attach to«ai»-«*»*&
2075 LAS PALMAS DRIVE
CARLSBAD, CALIFORNIA 92009-4859
Office of the City Engineer
TELEPHONE
(619)438-1161
(Eitg of (Earlsbaii
DATE: A/oy&rtS&Z /&> , 1987
Jack Thomas
COUNTY OF SAN DIEGO
Department of Public Works
5454 Ruffin Road
San Diego, CA 92123
INDUSTRIAL WASTE PERMIT APPLICATION NO
Enclosed is a copy of the application for an Industrial Waste
Discharge Permit from the subject applicant.
Your review and recommendations on this application will be
appreciated prior to the issuance of a waste disposal permit.
LLOYD B. HUBBS
City Engineer
LBH:SEE:lch
Enclosure: Application No.
c: Building Department
Fred Rowlen, Encinas Plant
Arnie Wing, Department of Health Services
COMMERCIAL/INDUSTRIAL
APPLICATION FORM FOR INDUSTRIAL WASTE DISCHARGE PERMIT
CITY OF CARLSBAD
APPLICATION: NEW
(CHECK ONE) REVISED
BUILDING P.C. NO
APPLICATION NO.:
INDUSTRIAL CLASS: 3J
DATE: //-/£
gnature of City Representative
APPLICATION FOR INDUSTRIAL WASTE DISCHARGE PERMIT
A. GENERAL:
APPLICANT:^
TYPE OF BUSINESS:
APPLICANT'S ADDRESS :
B. WASTES AND PROCESSING: (Check where applicable)
ic Waste Only |~| Industrial Waste |~| Industrial Waste NOT
Discharged to Sewer Discharged to Sewer
GENERAL DESCRIPTION OF WASTE (Chemical and Physical Characteristics of
proposed waste): _
GENERAL DESCRIPTION OF PROCESS (If Applicable):
C. WASTES TO BE DISCHARGED TO SEWER;
WASTE: TREATED:
(Check One) UNTREATEff
APPLICANT OR REPRESENTATIVE OF FIRM:
TITLE:
QUANTITY: AVERAGE
(Daily) MAXIMUM
GPD
GPD
(Gallons Per Day)
(Print)
DATE: