HomeMy WebLinkAbout2285 BRYANT DR; ; CB950295; Permit1CLEARAI)ICE
CITY OF CARLSBAD
2075 Las Palmas Dr., Carlsbad, CA 92009 (619) 438-1161
1
PERMlT APPUCATTON
City of Carlsbad Building Departaent 2075 Las Palmas Dr., Carlsbad, CA 92009 (619) 438-1161
I
From List 1 (see back) give code of Permit-Type:
For Residential Projects Only: From List 2 (see back) give
.........................................................
Code of Structure-Type:
Net Loss/Gain of Dwelling Units
22. PRC"INFORMATI0N FOR OFFICE USE ONLY
Nearest Cross Street
LEGAL D-ON Lot No. Subdiwsion NamdNumber Unit No. Phase No.
0 2 Energy Caks
DESCRIPTION OF WORK C
0 2 Structural Calcs 0 2 Soils Report 1 Addressed Envelope
R'S mm_EmSnNc USE
COJ&L Tcbo 41
U AGE UAR . NAME (last name first)
ZIP CODE DAY TELEPHONE
(c
CITY
ADDRESS s-. NAME (last name first)
CITY STATE ZIP CODE DAY TELEPHONE
c
* I CITY
STATE LIC. # LICENSE CLASS CITY BUSINESS LIC. # 6908 Q3A * bo'
CITY STATE ZIP CODE DAY TELEPHONE STATE LIC. # u E [last name hrst)
Workers' Compensation Declaration: 1 hereby attirm that I have a certiticate of consent to selt-insure issued by the Director ot Industrial Relations, or a certificate of Workers' Compensation Insurance by an admitted insurer, or an exact copy or duplicate thereof certified
by the Director of the insurer thereof filed with the Building Inspection Department (Section 3800, Lab. C).
INSURANCE COMPANY POLICY NO. EXPIRATION DATE
Certiticate ot Exemption: I certi!y that in the performance ot the work tor which this permit is issued, I shall not employ any person in any manner so as to become subject to the Workers' Compensation Laws of California.
SIGNATURE DATE
Uwner-builder Ueclarahon: I hereby attirm tnat 1 am exempt trom the COntractors LLcenSe Law for the tollowing reason:
I, as owner of the property or my employees with wages as their sole compensation, will do the work and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner-builder will have the burden of proving that he did not build or improve for the purpose of sale.).
I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and contracts for such projects with contractor(s) licensed pursuant to the Contractor's License Law).
I am exempt under Section
(Sec. 7031.5 Business and Professions Code: Any City or County which requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for such permit to file a signed statement that he is licensed pursuant to the provisions of the Contractor's License Law (Chapter 9, commencing with Section 7000 of Division 3 of the Business and Professions Code) or that he is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars [$SOO]).
0
0
0 Business and Professions Code for this reason:
SIGNATURE DATE
Is the applicant or future building occupant required to submit a business plan, acutely hazardous materials registration form or risk management and prevention program under Sections 25505, 25533 or 25534 of the Presley-Tanner Hazardous Substance Account Act?
Is the applicant or future building occupant required to obtain a permit from the air pollution control district or air quality management district?
Is the facility to be constructed within 1,000 feet of the outer boundary of a school site?
IF ANY OF THE ANSWERS ARE YES, A FINAL CERTIFICATE OF OCCWANCY MAY NOT BE HAS MET OR IS MEITDIG THE REQUIREMENTS OF THE OWICE OF EMERGENCY !SERVICE3 AND THE AIR WLLIJTION CONTROL DKIRICX.
1 hereby attirm that there is a construction lending agency for the pertormance ot the work tor which this permit is issued [Sec 309m I Civil Code].
0 YES 0 NO
0 YES 0 NO
om 0 NO AFIERJULY 1,1989 UNLESS THE APPLlCA?4T
IHUL-1 LElyull t
LENDER'S NAME LENDER'S ADDRESS
1 certiIy that 1 have read the application and state that the above information is correct. 1 agree to comply with all City ordinances and State laws relating to building construction. I hereby authorize representatives of the City of Carlsbad to enter upon the above mentioned property for inspection purposes. I AIS0 AGREE TO SAVE INDEMNMAND KEEP HARMLPSS THE CITYOFCARISBAD AGAINSALLLIABILITIES, JUDGMENTS, OOSIS AND EXPENSES WHICH MAY IN ANY WAY ACCRUE AGAINS sA[D CrlY IN CONSJQUENCE OF THE GRANTING OF THIS PERMT.
OSHA: An OSHA permit is required for excavations over 5'0" deep and demolition or construction of structures over 3 stories in height.
Expiration. Every permit issued by the Building Official under the provisions of this Code shall expire by limitation and become null and void if the building or work authorized by such permit is not commenced within 365 days from the date of such permit or if the building or work authorized by such permit is suspended or abandoned at any time after the work is commenced for a period of 180 days (Section 303(d) Uniform Building Code).
WHITE: File YELLOW: Applicant PINK: Finance
DATE:
Q
CITY OF CARLSBAD INSPECTION REQUEST FOR 03/09/95
. 8
c
PERMIT# CB950295 .- DESCRIPTION: 400 SF PATIO COVER
TYPE: PATIO
JOB ADDRESS: 2285 BRYANT DR
APPLICANT: JONAK, JOSEPH
CONTRACTOR:
OWNER:
ICBO X1841P
INSPECTOR AREA PLANCK# CB950295
OCC GRP
CONSTR. TYPE VN
STE : LOT: PHONE: 619 931-0201 PHONE: PHONE :
REMARKS: MW/JOSEPH
SPECIAL INSTRUCT:
TOTAL TIME:
--RELATED PERMITS-- PERWIT# TYPE
CB910971
CD
19
LVL DESCRIPTION
ST Final Structural Y F
DATE DESCRIPTION
INSPECTOR
COMMENTS
***** INSPECTION HISTORY *****
ACT INSP COMMENTS
City of Carlsbad
1635 Faraday Av Carlsbad, CA 92008 Building Permit Permit No:CB910971 09-08-2005
Building Inspection Request Line (760) 602-2725
Job Address: 2285 BRYANT DR CBAD
Permit Type: RADMAJ Sub Type:
Valuation: $0.00 Const Type: VN
OccGroup: Reference #: Entered By: CD
Appr/Issued:
Project Title: ADD FAM RM TO FACT BLT HOUSE Inspect Area:
Parcel No: 2121015800 Lot #:
Applicant:
PERRY, JOHN
2285 BRYANT DR
CARLSBAD, CA 92008
4317777
Owner:
PERRY JOHN C
Total Fees: $194.00 Payments To Date: $194.00 Balance Due:
$0.00
FINAL APPROVAL
Inspector: Date: Clearance:
NOTICE: Please take NOTICE that approval of your project includes the ’Imposition’ of fees, dedications, reservations, or other exactions hereafter collectively
referred to as ’feeslexactiis.” You have 90 days from the date this permit was issued to protest imposition of these feeslexactiis. If you protest them, you must follow the protest procedures set forth in Government Code Section 66020(a), and file the protest and any other required information with the City Manager for
processing in accordance with Cartsbad Municipal Code Section 3.32.030. Failure to timely follow that procedure will bar any subsequent legal action to attack,
review, set aside, void, or annul their imposition.
You are hereby FURTHER NOTIFIED that your right to protest the specified feeslexactiins DOES NOT APPLY to water and Sewer connection fees and capactiy
changes, nor planning, zoning, grading or other similar application processing or service fees in connection with this project NOR DOES IT APPLY to any
fees/exactions of which you have previously been given a NOTICE similar to this, OT as to which the statute of limitations has previously otherwise expired.
A
PERhrlIT APPLICATTON
City of Carlsbad Building Department
2075 Las Palmas Dr., Carlsbad, U 92009 (619) 438-1161
A - U Commercial mew Building U Tenant Improvement
C - 0 Residential
B - 0 Industrial
0 Apartment OCondo #Addition/Alteration
0 Duplex 0 Demolition 0 Electrical 0 Plumbing
0 New Building
0 Mechanical 0 Pool 0 Spa 0 Retaining Wall 0 Solar 0 Other
2. PR(UECIINIQRMATI0N
PLAN CHECK NO.
&.dJYT
FOR OFFICE USE ONLY
Nearest Cross Street E L c6-, ;c0 lcrc LEGAL DECFPTIUN Unit No. Phase No. Lot No. Subdivlsion Name/Number
CITY V;jT4 STATE ZIP CODE 4zUgy DAY TELEPHONE q'+f/ -4 VCZ
STATE LIC. # .T232/3 LICENSE CLASS k CITY BUSINESS LIC. #
NAME
CITY STATE 45 *& :z DAY TELEPHONE STATE LIC. #
Workers' Compensation Declaration: I hereby atlirm that I have a certiticate ot consent to sei[-insure issued by the Director ot Industrial Relations, or a certificate of Workers' Compensation Insurance by an admitted insurer, or an exact copy or duplicate thereof certified by the Director of the insurer thereof filed with the Building Inspection Department (Section 3800, Lab. C).
INSURANCE COMPANY Fa4 POLICY NO. EXPIRATION DATE 4 - 1 - 92
Certiticate of Exemption: 1 certity that in the performance ot the work tor which this permit IS issued, 1 shall not employ any person in any manner so as to bme subject to thm Compensation Laws of California.
I
DATE 4-27 - 9+/
Owner-Builder Declaration: I hereby attirm that I am exempt from the Contractor's Lcense Law for the tollowing reason:
0 I, as owner of the property or my employees with wages as their sole compensation, will do the work and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner-builder will have the burden of proving that he did not build or improve for the purpose of sale.).
I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and contracts for such projects with contractor(s) licensed pursuant to the Contractor's License Law).
1 am exempt under Section
(Sec. 7031.5 Business and Professions Code: Any City or County which requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for such permit to tile a signed statement that he is licensed pursuant to the provisions of the Contractor's License Law (Chapter 9, commencing with Section 7000 of Division 3 of the Business and Professions Code) or that he is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a pennit subjects the applicant to a civil penalty of not more than five hundred dollars [$500]).
0
0 Business and Professions Code for this reason:
SIGNATURE DATE
COM- NON--TIM BUILDING -ONLY:
Is the applicant or future building occupant required to submit a business plan, acutely hazardous materials registration form or risk management and prevention program under Sections 25505, 25533 or 25534 of the Presley-Tanner Hazardous Substance Account Act?
Is the applicant or future building occupant required to obtain a permit from the air pollution control district or air quality management district?
Is the facilitv to be constructed within 1,000 feet of the outer boundarv of a school site?
0 YES 0 NO
0 YES 0 NO
0 YES 0' NO IF ANYOF THE ANSWERS ARE YES. A FINALCERTIFICATE OF OCCUPANCY MAY NOT BE ISSUED AFFERJULY 1.1989 UNLFSS THE APPUCANT HAS MET OR IS MEElPiG TIE m- OF TILE OFFICE OF EMERGENCY SJXVICES AND THE AIR WhON OONTROL DISllUCT.
I hereby attirm that there is a construction lending agency tor the performance ot the work tor which this permit IS issued (Sec 309m I Civrl Code).
LENDER'S NAME A/D 5 LENDER'S ADDRESS
1 certity that I have read the application and state that the above intormation is correct. 1 agree to comply with all City ordinances and State laws relating to building construction. I hereby authorize representatives of the City of Carlsbad to enter upon the above mentioned property for inspection purposes. I ALSO AGREE TO SAVE INDEMNIFYAND KEEP IIARMLEssTHECllYOFcARLsBADAGAINsTAL.LLlAB~ JUJIGMENTS, COSIS AND EXPENSES WHICH MAY IN ANY WAY ACCRUE AGAIN5X SAID CllY IN OONSEQUENCE OF TIE CRAFdTLNG OF THIS PJ%MlT.
OSHA: An OSHA permit is required for excavations over SO" deep and demolition or construction of structures over 3 stories in height.
Expiration. Every permit issued by the Building Official under the provisions of this Code shall expire by limitation and become null and void if the building or work authorized by such permit is not commenced within 365 days from the date of such permit or if the building or work authorized by such peyit is suspended or abandoned at any time after the work is commenced for a period of 180 days (Section 303(d) Uniform Building Code).
SIGNATURE
---
TE: File YELLOW Applicant PINK: Finance
DATE: 06/01/92 PLAN CHECK EXPIRATION
TO: PERRY, JOHN ADDRESS: 2285 BRYANT DR PC# CB910971 DATE: 06/26/92
2285 BRYANT DR CARLSBAD, CA 92008
You have applied to have your plans checked on the date shown above, and you have not obtained your building permit.
The provisions of Section 304(d) of the Uniform Building Code
state:
"Section 304(d) Expiration of Plan Review
Applications for which no permit is issued within one year following the date of application shall expire by limitation, and plans and other data submitted for review may thereafter be returned to the applicant or destroyed by the Building Official.
l
In order to renew action on an application after expiration, the applicant shall resubmit plans and pay a new plan review fee."
Please check the appropriate box indicating your choice and return this letter to the BUILDING DEPARTMENT.
PROJECT ABANDONED. I WILL PICK UP PLANS WITHIN 10 DAYS.
PROJECT ABANDONED. PLANS MAY BE DESTROYED.
If you have any questions, please contact the Building
Department at (619) 438-1161.
DORIS COSMAN Building Department
43 2075 Las Palmas Drive - Carlsbad, California 92009-1576 - (619) 438-1 161
-
h ESGIL CORPORATION
9320 CHESAPEAKE DR., SUlTE 208
SAN DlEGO, CA 92123
(619) 560-1468
0
-0
0
@
O
rn
m
I rhe Dlans transmitted herewith have been corrected where neceisary and substantially comply with the jurisdiction's
building codes.
The plans transmitted herewith will substantially conply with the jurisdiction's -building codes when minor deficien- - cies identified are resolvsd and
checked by building department staff.
The plans transmitted herewith have significant deficiencies identified on the enclosed check list and should be corrected
and resubmitted for a complete recheck.
The check list transmitted herewith is €or your information.
The plans are being held at Esgil Corp. until corrected plans are submitted for recheck.
The applicant's copy of the check list is enclosed for the jurisdiction to return to the applicant contact person.
The applicant's copy of the check list has been sent to:
SCOTT p*dcR\ZD 2035 CGTaLWB &LIE*
i,4T*: Ce, 4'Lb84.
Esgil staff did not advise the applicant contact person that plan check has been completed,, 6TFLm2 TUM N Ma1 UXI G
Esgil staff - did advise applicant that the plan check has O been completed. Person contacted:
Date contacted: Telephone f:
. 0 REMARKS:
Date plans received by jurisdiction:
Date plans received by Esgil Corporation:
VI\\% \
Plan check is limited to technical requirements
contained in the Uniform Building Code, Uniform
Plumbing Code, Uniform Mechanical Code, National
Electrical Code and state laws regulating energy
conservation, noise attenuation and access for the
handicapped. The plan check is based on
regulations enforced by the Building Inspection
Department. You may have other corrections based
on laws and ordinances by the Planning Department,
Engineering Department or other departments.
Present California law mandates that residential
construction comply with Title 24 and the following
model codes:
1988 UBC (eff. 1/1/90)
1988 UPC (eff. 1/1/90)
1987 NEC (eff. 10/28/87)
1988 UMC (eff. 1/1/90)
The above regulations apply to residential
construction, regardless of the code editions
adopted by ordinance.
The circled items listed need clarification,
modification or change. All items have to be
satisfied before the plans will be in conformance
with the cited codes and regulations. Per Sec.
303(c), 1988 Uniform Building Code, the approval of
the plans does not permit the violation of any
state, county or city law.
To speed UD the recheck urocess. note on this list
or a copy) where each correction item has been
sure to enclose the marked u list when ou submit
the revised plans.
..
Date initial plan check completed:
Applicant contact person:
I - -
List No. 12, Carlsbad Single Family Dwelling
PLANS -
Please make all corrections on the original tracings and submit two new sets of prints, and any original plan sets that may have been returned to you by the jurisdiction, to:
Esgil Corporation, 9320 Chesapeake Drive, Suite 6208, San Diego, California (619) 560-1468. 92123,
B 3 @ Please make all corrections on the original tracings and submit two new sets of prints, and any original plan sets that may have been returned to you by the jurisdiction, to:
The jurisdiction's building department.
$ Indicate on the'Title Sheet of the plans, the name of the legal owner and name of person responsible for the preparation of the plans. Section 302(a)7.
All sheets of plans must be signed by the person responsible for their preparation. P (California Business and Professions Code).
Plans, specifications and calculations shall be signed by the California state licensed engineer or architect responsible for their / preparation, for plans deviating from conventional wood frame construction. Specify expiration date of license. (California Business and Professions Code).
p! Specify on the Title Sheet of the plans the gross floor area of each element of this project including dwelling, garage, carport, patio, deck and balcony.
Provide a statement on the Title Sheet of the @ plans that this project shall comply with Title 24 and 1988 UBC, UMC and UPC and 1987 NEC.
Submit fully dimensioned plot plan draw to f /$. scale showing location, size, and use of all existing and proposed structures on the lot. Identify property lines and show lot dimensions and all easements. Show location of all cut or fill slopes. Show finish floor elevations and show elevations of adjacent finish grade. Show drainage patterns with minimum slopes. Section 302(d).
Indicate distance from property lines to
Section 302(d).
/$- proposed building. Section 302(d).
Show on the title sheet all structures, pools, walls, etc. included under this application. Any portion of the project shown on the site . plan that is not included with the building permit application filed should be clearly identified as "not included .I'
Clearly show if the lower level is a basement or a story, based on the definitions in Sections 403 and 420. Plot the finish grade (as defined) on the elevations and dimension the distance to the floor above, for story determination.
On the cover sheet of the plans, specify any items requiring special inspection, by way of the following:
REWIRED SPECIAL INSTRUCTIONS In addition to the reeular inmections. the following checked items" will ilso reqhire Special Inspection of the Uniform Building Code. in accordance with Sec 306
ITEM REQ. IF REMARKS CHECKED SOILS COMPLIANCE PRIOR TO FOUNDATION IXSP.
STP.'JCTURAL CONCPm
OVEP 2500 PSI
PRESTRESSED STEEL
FIELD WELDING
HIGH STRENGTH BOLTS
EXPANSION ANCHORS
SPECIAL MASONRY
SPRAYED ON FIRE PROOFING
PILES/CAISSONS
DESIGNER-SPECIFIED
OTHER
FIREpFacEcmoN
I{ Exterior walls closer than 3 feet to property lines shall be one-hour rated constructicm and have no openings. Table 5-A.
Exterior walls closer than 3 feet to a property/
line shall have 30 inch parapets when the floof area per floor exceeds 1,000 square feet? Section 1709.
Projections, including eaves, may not extend more than 12 inches into the 3 foot setback from the property line.
Eaves over required windows shall be not less than 30 inches from the side and rear property lines. Section 504.
Plastic skylights shall not be installed within
that portion of a roof located within a distance to property line where openings in exterior walls are prohibited or required to be protected. Section 5207 (a) 7.
Projections, including eaves, shall be one- hour fire-resistive construction, heavy timber or of noncombustible material if they project into the 3' setback area from the property line. Section 1710.
Section 1710.
Show location of permanently wired smoke detector: a. Centrally located in corridor or area
b. On each story. c. In the basement. d. When sleeping rooms are upstairs, at the upper level in close proximity to the stair. e. In rooms adjacent to hallways serving bedrooms, when such rooms have a ceiling height 24 inches or more above the ceiling height in the hallway. NOTE: Detectors shall sound an alarm audible in - all sleeping areas of the unit.
giving access to sleeping rooms.
2p.
6-
Section 1210
Openable window area in habitable rooms must be 1/20 of the floor area and a minimum of 5 square feet. In bathrooms, laundry rooms and similar rooms 1/20 of area is required and minimum is 1.5 sq. ft. Section 1205 (a).
At least 112 of the common wall must be open and have an opening not less than 25 sq. ft. nor one tenth of the floor area of the interior room if light and ventilation is being supplied from an adjacent room. Section 1205 (a).
Required windows shall not open into a roofed porch unless the ceiling height is at least 7 feet, the longer side is at least 65% open, and the porch abuts a street, yard or court. Section 1205 (a).
Provide mechanical ventilation capable of providing five air changes per hour in bathrooms, water closet compartments, laundry rooms and similar rooms if required openable windows are not provided.
Show discharge point for exhaust air to be at least 5 feet from any mechanical ventilating intake. Section 1205(c).
Ductless fans cannot be used in bathrooms if a tub or shower is present.
No habitable room, other than a kitchen, shall be less than 7'0'' in any dimension. Section 1207 (c).
Show that ceiling height for habitable rooms is a minimum of 7'6".
Section 1205 (c).
Section 1205(c).
Section 1297 (a).
Show ceiling height for laundry rooms, hallways, corridors, and bathrooms is a When the valuation of a room addition or repair minim& of 7'0". exceeds $1,000, or when sleeping rooms are created, smoke detectors shall be provided at Dimension on the plans the 30" clear width for existing bedrooms per item 19 above. Section water closet compartments and 24" clearance in 1210. front of water closet. Section 511 (a).
Section 1207 (a).
+. Habitable rooms, other than kitchens, shall contain at least 70 square feet of floor area. At least one room shall have not less than 120 square feet of floor area. Section 1207 (b).
@ Window area must be at least 1/10 of the floor area and a minimum of 10 square feet per .. fl Section 1205 (a).
y. Specify safety glazing for glazing in hazardous locations such as glass doors, glazing adjacent to doors and glazing adjacent to walking surfaces. Section 5406. . Glazing, in the same wall plane as a door, 9 must be safety glazing if within 12" of the door and less than 60" above the walking surface, unless the glazing is leaded or faceted glass. Section 5406 (d) 6.
3). Glazing in shower and tub enclosures shall be tempered, laminated or approved plastic (including windows within 5 feet of tub or shower floor).
/
h9 Skd w 1dmLL, S\IF- 8 r9 ?& Section 5406 (d) 5.
Sleeping rooms shall have a window or exterior door for emergency exit. Sill height shall not exceed 44" above the floor. The window must have an openable area of at least 5.7 square feet with the minimum openable width 20" and the minimum openable height 24". Section 1204.
Basements in dwelling units shall comly with the above (even if not designated as sleeping rooms). Section 1204.
Walls and floors separating units in a duplex shall be of one-hour fire-resistive construction. Section 1202( b) . .
A mezzanine is an intermediate floor and may not have a floor area exceeding 33 113 percent of the total floor area in the room below. The mezzanine floor must have a clear height of 7 feet, above and below, and must have the long side open to the room below except for posts and protective walls or railings not exceeding 42" in height. Section 1716.
The loft you show does not comply as a mezzanine floor and is, by Uniform Building Code definition, a story. Section 1716.
FXITS. SJXIRUAYS. AND RAILINGS
Floors above the second story shall have not less than 2 exits. Exceptions: 1. Occupied roofs may have one exit if such occupied areas are less than 500 square feet and located no higher than hediately above the second story. 2. When the third floor wit\in a unit does not exceed 500 sq. ft., only one exit need be provided. Section 3303(a).
Required exit doorways shall be not less than 36" in width and not less than 6'8" in height, and shall be capable of opening at least 90 degrees. Section 3304 (f).
Provide 36" high protective railing for porches, balconies, and open sides of stair landings. Openings between railings shall be less than 6". Section 1711.
Show how guardrail connection details are
adequate to support 20 pounds per' lineal foot at a right angle to the top rail. Table 23-E.
Provide stairway and landing details. Section
a. Maximum rise is 7" and minimum run is 11". When the stairs serves less than 10 occupants, or serves an unoccupied roof, rise may be 8" maximum and run 9ll minimuin.
3306 (b), (c) and (PI-
b. Mink headroom is 6'-8".
c. Minimum width is 36".
All handrails per Section 3306 (j), shall satisfy the following:
a. Provide handrail For stairways with 4 or more risers.
b. Handrail shall be 34" to 38" above the nosing of treads.
The handgrip portion of handrail shall be not less than 1 112". nor more than 2" in cross-sectional dimension.
c.
Every stairway landing shall have a dimension, measured in the direction of travel, at least equal to the stairway width. Such dimension need not exceed 36 inches. Section 3306 (g),
3304 (j).
An interior door may open inward at the top step of a stairway provided the top step is not more than 7 1/2" lcver than the floor level. Section 3304 (i).
Provide details of winding stairway complying with Section 3306 (d):
a. Minimum tread is 6 inches at aiiy point and minimum 9 inches at a point 12 inches from where the treads are narrovest.
b. Maximum rise is 8 inches.
c. Minimum width is 36 inches.
%
Provide spiral stairway details, per Section 3306 (f):
a. Minimum run is 7 112 inches measured at a inches from where the treads are point 12 the narrowest.
b. Maximum rise is 9 112 inches. Maximum clear opening between risers is 6 inches.
c. Minimum headroom is 6 feet 8 inches
d. The tread must provide a clear walking
area measuring at least 26 inches from the
outer edge of the supporting colunm to the inner edge of the handrail.
Spiral stairways may not be used for required
exits ;rhen the area served is greater than 400 sq. ft. Section 3306 (f).
Provide I.C.B.O. Research Report .and number for metal stairday, or submit pl~ and calculations and approved fabricator registered
with the building department or note that the stairway fabrication plans shall be submitted to and approved by the building official prior to installation.
Exterior stairways shall not project into the 3 foot setback from the property lines. Section 3306 (n) .
The walls and soffits of the enclosed usable space under interior stairs shall be protected on the enclosed side as required for one-hour fire-resistive construction. Section 3306 (m).
Within minimum
Specify
units, show that corridors have a wid,th of 36 inches. Section 3305 (b).
roof slope.
Roof slope is not adequate for roof type
specified. Table 32-B,C,D and E.
Specify roof material and application. Chapter 32.
Specify I.C.B.O. or U.L. approval number for
roof materials not covered in U.B.C., e.g., tile, etc. Section 107.
Specify minh 114 inch per foot roof slope
for drainage or design to support accumulated water. Section 3207 (a) and Section 2305 (f).
Show roof drains and overflows. Section 3207.
Provide skylight details to show compliance with Sections 3401 and 5207 or provide
I.C.B.O. approval number.
Plastic skylights must be separated from each other by at least 4 feet. Section 5207 (a) 6.
Show attic ventilation. Minh vent area is 11150 of attic area or 11300 of attic area if
at least 50% of the required vent is at least
3 feet above eave vents or cornice vents. Show required area and area provided. Section 3205 (c).
Provide fireplace construction details or note
construction to be per attached fireplace standard drawing. Chapter 37.
Show anchored veneer support and connections
attached to wood in Seismic Zones 3 and 4, comply with Section 3006 (d)l and Section 2515 (a). Show ties and 19 wire in horizontal
joints.
Show height and construction details of all masonry walls. Chapter 24.
Show floor and roof connections to masonry
walls. Connection shall resist 200 pounds per lineal foot or the actual design load, whichever is greater. Cross grain tension or
bending in wood ledgers is not permitted. Section 2310.
Show a minimum 2" air space and flashing
between planter and building walls. Section 2516 (c) 7.
Garage requires one-hour fire protection on the garage side of walls and ceiling common to the dwelling.
All elements supporting floor above garage, including walls supporting floor joists, must have one-hour fire-resistive protection on the garage side. Section 503 (b)
Show 1 318" solid core self-closing door for'
openings between garage and dwelling. 503 (d).
Garages are
Table 5-B, Section 503 (a).
Section
not permitted to open into a room
used-for sleeping purposes. Section 1104. ,Um ON NW tZom '' Kw 7a EC
An occupancy separation is not required between carport and residence,.provided the carport is open on two or more sides and has no enclosed uses above. Section 503 (a) Exception 3.
Show garage framing sections, size of header over garage opening, lateral cross bracing at plate line, method bracing garage front and holddowns if required. Chapter 23.
NOTE: Maximum shear panel height-to-width ratio is 3 112 to 1 for plywood. Table 25-1.
Doors may open into the garage only if the floor or landing in the garage is not more than one inch lower than the door threshold. Section 3304 (i).
. Provide an 18" raised platform for any FAU, water heater, or other device in the garage which may generate a flame or spark. UMC Section 508, UPC Section 1310 (a).
;s.
i
Per soils report, note on the plan the soils classification, whether or not the soil is expansive and note the allowable bearing value. Section 2905 (c).
The foundation plan does not comply with the soils report recommendations for this project. Please review the report and modify design, notes and details as required to show compliance :
f Provide notes on the foundation plan listing the soils report recommendation for foundations, slab and building pad preparation.
. Provide a letter from the soils engineer ' confirming that the foundation plan, grading plan and specifications have been reviewed and that it has been determined that the recommendations in the soils report are properly incorporated into the construction documents (when required by the soil report).
The soils engineer recommended that he/she review the foundation excavations. Note on the foundation plan that "Prior to the contractor requesting a Building Department foundation inspection, the soils engineer shall advise the building official in writing that:
1. The building pad was prepared in accordance with the soils report,
backfilled and compacted, and
the intent of the soils report".
2. The utility trenches have been properly
3. The foundation excavations comply with
f ily height of all foundation walls. Chapter
Show height of retained earth on all
+* foundation walls. Chapter 23.
f. If cut or fill slopes exist, show distance of foundation to edge of cut or fill slopes and show steepness and heights of cuts and fills. Chapter 29. +. Note on plans that wood shall be 6" minimum above finish grade.
@ Note on plans that surface water will drain away from building and show drainage pattern and key elevations.
Dimension foundation per U.B.C. Table 29A:
Section 2907 (a).
4 Section 2905 (f) .
.
Floors Footinq SUDDOrted;? Stemwall Width Denth Thickness
1 6" 12" 12" 6" 2 8" 15" 18" 7 )I 3 10" 18" 24" 8"
>'(Foundations may support a roof in addition to the floors. Where only a roof is supported, use foundation for one floor.
. Show foundation sills to be pressure treated, or equal.
Section 2907 (f).
Specify size, I.C.B.O. number and manufacturer
of power driven pins. Show edge and end distances and spacing.
Section 2516 (c) 3.
9/d. Show foundation bolt size and spacing.
.
Section 302 (d).
2/13/90 6
/
If required, show size, imbedment and location of hold down anchors on foundation plan. Section 302 (d).
If hold downs are required, note on plan that hold down anchors must be tied in place prior to foundation inspection. Section 305 (e) 1. .
Show adequate footings under all bearing walls and shear walls. Section 2907 (b).
Show on the plans stepped footings for slopes steeper than 1:lO.
Show minimum 18" clearance from grade to bottom of floor joists and minimum 12" clearance to bottom of girders.
Show pier size, spacing and depth into undisturbed soil. Table 29-A.
Section 2907 (c).
Section 2516 (c) 2.
Show minimum underfloor access of 18" x 24". Section 2516 (c).
Show minimum underfloor ventilation equal to 1
sq. ft. for each 150 sq. ft. of underfloor area. Openings shall be as close to corners as practicable and shall provide cross ventilation on at least two approximately opposite sides. Section 2516 (c) 6.
PRAWMG . Show wall bracing. Every exterior wood stud wall and main cross-stud partition shall be braced at each end at least every 25 feet of length with 1 x 4 diagonal let-in braces or equivalent.
In 2-story buildings, shear panels at the first story (at least 48 inches in width) shall be located at each end or as near thereto as possible and comprise at least 25 percent of the linear length of the wall, or provide design. Section 2517(g)3, Table 25-V. . Note cross bridging or blocking. Floor joists and rafters 12" or more in depth shall be supported laterally by bridging at intervals not exceeding 8 feet, unless both edges are held inline. Sec. 2506 (h), 2517 (d) 6.
14. Show blocking at ends and at supports of floor joists, rafters and trusses at exterior walls. Section 2517 (d) 3, 2517 (h) 6.
shall not be offset from supporting girders, beams, walls or partitions, more than the depth of the joist.
Section 2517 (g) 3, Table 25-V.
lop.
Bearing partitions, perpendicular to joists,
Section 2517 (d) 5.
. Show rafter ties. Rafter ties shall be spaced not more than 4 feet on center and be just above the ceiling joists, where rafters and ceiling joists are not parallel. Section 2517
Show rafter purlin braces to be not less than 45 degrees to the horizontal. Section 2517 (h) 5.
l#. Show double top plate with minimum 48" lap splice. Section 2517 (g) 2.
Show nailing will be in compliance with Table
Show or note fire stops at the following locations per Section 2516 (f):
a. In concealed spaces of stud walls and partitions, including furred spaces, at the ceiling and floor levels and at 10 foot intervals along the length of the wall;
At all interconnections between concealed vertical and horizontal spaces such as occur at soffits, drop ceilings and cove ceilings ;
c. In concealed spaces between stair stringers at the top and bottom of the run and between studs along and inline with the run of stairs if the walls under the stairs are unfinished; and
d. In openings around vents? pipes, ducts, chimneys, fireplaces and smilar openings which afford a passage for fire at ceiling and floor levels, with noncombustible materials.
In duplexes, draft stops shall be provided in floor-ceiling assemblies and attics in line with walls separating units and separating units from common areas.
Show stud size and spacing. Maximum allowable 14d. stud heights: Bearing wall: 2 x4 and 2 x 6 max. 10'; x 4 ma^. 14', 2 x 6 max. 20'. Table 25-R-3. . Studs supporting two floors, a roof and 9 ceiling must be 3 x 4 or 2 x 6 at 16" O.C.
. Note on A.I.T.C. Certificate of Compliance for glued lamhated wood members shall be given to the building inspector prior to installation. Section 2505.
(h) 4.
b.
Non-bearing: 2
Table 25-R-3. P
. Detail all post-to-beam and post-to-footing connections and reference the detail to the plan. Section 2516 (m).
1 5. Detaii shear transfer connections, including ' roof and floor diaphragms, to shear walls. Section 2513.
Specify nail size and spacing for all shear walls, floor and roof diaphragms. Indicate required blocking. Maintain maximum diaphragm dimension ratios. [Tables 25 I, J, K and Section 4714 (d)]. . Provide truss details and truss calculations for this project. Specify truss identification numbers on the plans. . Show 1f2" minimum clearance between top plate of interior partitions and bottom chord of trusses. (To ensure loading will be as designed). . Provide roof framing plan and floor framing 'p plan. Section 302 (d).
Provide framing sections through
Section 302 (d).
wide. Section 2517 (g) 5.
Provide calculations for main vertical and horizontal framing members and post footings. Section 302 (b).
3. Provide calculations for lateral loads, shear panels, shear transfer and related. Section 302 (b) .
Specify all header sizes for opening over 4'
. Columns and posts located on concrete or
IIBSONY floors or decks exposed to the weather or to water splash or in basements and which
support permanent structures shall be supported by concrete piers or metal pedestals projecting above floors unless approved wood of natural resistance to decay or treated wood is used. . Individual concrete or masonry piers shall project at least 8 inches above exposed ground unless the columns or posts which they support are of approved wood of natural resistance to decay or treated wood is used. Section 2516 (c) 4.
Show location of attic access with minimum size 22" x 30". Section 3205.
Show draft
Section 2516 (c) 4.
separation for attic areas between '9. units in a duplex. Section 2516 (f). . Specify plywood and/or particle board lf6 thickness, grade and panel identification
. When roof pitch is less than 3:12, design ridge as a beam. Section 2517 (h). . If foundation cripple wall studs are less than 14" high, framing shall be solid blocking, or sheathed with plywood. . Cripple wall studs exceeding 4 feet in height shall be 3 inch by 4 inch or 2 inches by 6 inches when sup orting 2 stories. Section 2517 (9 4. . Show plywood sheathing over exposed eaves, or other weather exposed areas, is "bonded with exterior glue." Plywood used for exterior wall covering shall be the exterior type. Section 2516 (i), 2516(g)3.
index. Table 25-S.
Section 2517 (g) 4.
Detail truss layout for 30" x 30" attic access, if required for equipment in the attic.
14. In Seismic Zones 3 and 4, the allowable shear wall values for drywall in Table 47-1 must be reduced 50 percent when considering earthquake loads. This does not apply to wind loads. Footnote 1. 1 6. Ridges, hips, and valleys shall be at least one size larger than supported rafters. 5. Show on the plans all structural requirements Section 2517 (h) 3. developed in the structural Section 302 (d). (See comments provide strap ties end. ) across the beams at the ridge support. Section 2501 (b).
"ICAL ODDJQ
J
All heating, ventilating, and cooling systems and appliances shall comply with the Uniform Mechanical Code.
-
show the size, location and type of all heating and cooling appliances or systems.
show source of combustion air to furnace, per Electrical Code. chapter 6, UHC.
ELECIRICAL (NATIONAL ELECJXICAL CODE1
All wiring shall comply with the National
Show on the plan the meraEe of the
40 Every dwelling unit shall be provided with heating facilities capable of maintaining a room temperature of 70 degrees F. at 3 feet above the floor in all habitable rooms. Show basis for compliance. L'BC, Sec. 1212. . show minh 30'' deep unobstructed working space in front of furnace. Section 505, UHC.
F'urnace shall not be installed in any bedroom, bathroom or in a closet or confined space with access only through such room unless specified as direct vent appliance, enclosed furnace or electric heating appliance. Section 704 UMC.
7
1;11 +
. Show I.C.B.O. approval number for prefab fireplace. Show height of chimey above roof per I.C.B.O. approval or Table 37-B.
I+. show access to the attic containing equipment to be mininum 30 inches by 30 inches. The opening may be 22 inches by 30 inches if the equipment can be removed through such opening. Section 708 UHC.
15. Where equipment is installed in the attic, the distance from the attic access to such equipment shall not exceed 20 feet.
. Note thatpasscgeway to the attic furnace shall be unobstructed and have continuous solid flooring not less than 24 inches wide.
Section 708 UMC.
/ +
4
1
7. Show permanent electrical outlet and lighting fixture controlled by a switch for the attic furnace. Section 708 WC. . Show details to comply with Section 709 for furnace under the floor, or Section 710 for roof or outside furnace.
19. Note on plan: Gas vents and non-combustible
piping, in walls, passing through three floors or less shall be effectively draft stopped at each floor or ceiling. UBC, Section 1706 (a) 6. . Provide dryer vent to outside. UHC, Section 'td 1903.
electrical seAice, the licatilon of the service panel and the location of any sub- panels. If service is over 200 amps, submit single line diagram, panel schedule and load calculations. 1,d. Show location of all electrical receptacles.
l$. Electrical receptacle locations and/or spacing is not adequate in
1d. Show at least one convenience outlet other / than outlets for laundry, etc,, outdoors, in garages and basenents. hTC, Art. 210-52. . Note convenience outlets in bathrooms, kitchen
counter top(s) within 6 feet of the kitchen sink, outdoors, and in garages and basements (other than for laundry and similar equipment)' shall be GFI protected. h'EC, Art. 210-8. . Note electrical system ground to be provided per hTC, kt. 250-81.
Y
lf. Show water heater size, type and location on plans. UPC, Section 1301.
1 8. Show source for providing combustion air to fuel burning water heater. If wall openings in an enclosure are used, at least one-half of the required opening area shall extend into the upper twelve inches of the enclosure and
one-half within the lower twelve inches. UPC, Section 1307.
159. Fuel combustion water heater shall not be installed in bath or bedroom or in a closet opening into bath or bedroom. UPC, Section 1309. . Provide adequate barrier to protect water 'F heater from vehicle damage. An 18" platform for the water heater does not satisfy this requirement. UPC, Section 1310. . Show T and P valve on water heater and show route of discharge line to exterior. UPC, Section 1007 (e).
4
Show that water heater is adequately braced to resist seismic forces, when not connected by rigid pipe. UMC Section 504(d).
1 3. Show shower stall can accomodate a 30" circle d and has a minimum floor area of 1,024 sq. in.
washer hook-up for each unit. Title 24, Part 3.
I+. Show details of duplex comon (party) walls and floor/ceiling assemblies to achieve a Sound Transmission Class (STC) rating in walls of 50 decibels and an Impact Insulation Class (IIC) rating on floor/ceiling of 50 decibels. Title 24.
1 til . Show how penetrations of assemblies for piping, electrical devices, recessed cabinets, bathtubs, soffits, or heating ventilating, or exhaust ducts shall be sealed, lined, or insulated to maintain required sound transmission rating. Title 24.
14. Provide insulation in walls and ceiling to achieve STC of 50 between garage and living area if garage use is not controlled by resident. Title 24.
ENERGY (XINmATION
Provide plans, calculations and worksheets to show compliance with current energy standards.
9. The regulations require a properly completed and properly signed Form CF-1R to be either imprinted on the plans, taped to the plans or "sticky backed" on the plans, to allow the building inspector to readily compare the actual construction with the requirements of the approved energy design. 76. All energy items shown on the plans must be in agreement with the information shown on the properly completed Form CF-1R.
:17 . Specify on the buildincl. plans all of the mandatory energy conservation requirements as listed on the enclosure titled, "Mandatory beray Conservation Requirements".
Show the make, model and efficiency of the space heating (or cooling) system and provide heat loss calculations if the output exceeds 45,000 BTU/Hr.
I..
d
/ 2
1# For room additions, show that the glazing area of the addition does not exceed 16% of the newly-conditioned floor area, plus glazing removed or relocated due to the addition.
Provide fluorescent general lighting in kitchen(s) per CAC, Title 24, 2-5352(J).
CARLSBAD S.F.D. & DUPLEX
l/. :ygy conservation design should be for Zone
Floor drains must have auto-prime (city policy). #. Note exhaust fans cannot be ductless type (city policy).
be pre-plumbed for future solar water heating. Note "two roof jacks must be installed" where the water heater is in the one story garage and directly below the most south facing roof (City Ordinance No. 8093).
1 9. Note "two 3/4" copper pipes must be installed
t+ to the most convenient future solar panel location when the water heater is not in a one story garage and is not directly below the most south facing roof. (City Ordinance No. 8093).
1 6. ~11 piping for present or future solar water ! heating must be insulated when in areas that are not heated or cooled by mechanical means (city policy).
on the attached Policy 80-8, where interior living space occurs below grade at the masonry wall(s).
s18 . Show on the Title Sheet on the plans, the information required by the attached Developmental Services Sheet 112383.
All new residential buildings, including additions, require a soils report. Please submit two copies. Exception: If a room addition is limited to one story and 1000 sq. ft. in area, then a soils report is not required. Esgil Corporation will advise the City to place their soils notice stamp on the plans.
Heavy timber framing, minimum 6" x 10" beams and min- 8" x 8" post, for the structural beam and column supporting the fire separation between the garage and living area above, is acceptable if shown on the plans. (city policy).
. New residential units must
/
185. Incorporate the waterproofing details,
. All structures require a Class B roof covering, If a room addition covers all of the existing building (2nd story addition), then the above exception doesn't
aPP 1Y -
City Ordinance 9792 requires two parking spaces/unit with clear area of 20'x20' i.e. no washing machines, etc. Show compliance.
All chimneys attached to any appliance or fireplace that bums solid fuel shall be equipped with an approved spark arrester. The net free area of the spark arrester shall be not less than four times the net free ara of the outlet of the chimney. The spark arrester screen shall have heat and corrosion resistance equivalent to 12 gauge wire, 19 gauge galvanized wire or 24 gauge stainless steel. Openings shall not permit the passage of spheres having a diameter larger than 1/2-inch and shall not block the passage of spheres having a diameter of less than 3/8-inch.
m- S
@ except room additions.
been addressed, i.e., plan sheet, note or detail number, calculation page, etc.
corrections from this list. If there are other changes, please briefly describe them and where they are located in the plans.
Have changes been made to the plans not resulting from this correction list? Please check.
Yes No
The City of Carlsbad has contracted with Esgil Corporation located at 9320 Chesapeake Drive, Suite 208, San Diego, California 92123; telephone number 619/560-1468, to perform the plan check for your project. If you have any questions regarding these plan check items, please contact --
at Esgil Corporation. If you have any questions regarding City Building permit procedures, please contact Carter Darnell at the City of Carlsbad, 2075 Las Palmas Dr., telephone 619/438-1161.
Thank you.
~
21 14/90 11
.-
(3)
(4)
All heating, ventilating, air conditioning, and water heating equipnent shall meet all of the
requirements of the Appliance Efficiency Standards and shall be certified by the California Energy
Coonission.
A two stage themostat, which controls the supplementary hat on its second stage, shall be
provided for heat pqs.
Zhernostats shall be equipped with an autonatic setback, which the building occupant can program to
autonatically set back the themostat twice in 24 hours.
Equipnent which requires preventive maintenance to rabtzin efficient operation shall be furnished
with complete necessary naintenance infonation.
~ll gas-fired fan tDe central furnaces, gas-fired fan type call furnaces, and cooking appliances
shall be equipped with an internittent igniticn device.
All fan system exhausting air to the outside shall be provided with backdraft dazqers.
A11 transverse duct, plena, and fitting joints shall be sealed vit!! pressure sensitive tape or
mastic to prevent air loss and shallrbe insulaced to conforn to the provisions of Section 1005 of
the UHC, 1982 Edition.
A vapor barrier is required in clhte zoRe 1, 14, and 16.
All manufactured vbdows and sliding glass doors shall neet the 1972 hSSI air infiltration
standards and shall be certified and labeled.
All winging doors and windows leading to uxonditioned seas shall be fully weather-stripped.
Storage type water heaters and storage and bckq tanks for solar systeas shall be externally
vrapped with R-12 hulation or greater.
The five feet of pipe closest to the water heater, if outside conditioned space, shall be instllated
with a mininu3 of 2-3.
piping outside the building envelope shall be insulated L? accordance wit!! 120-1L06( d) .
Laps used in lminaries for general lighting L? kitc!!ens aad ba'hoons sb11 have an efficiency of
not less than 25 lunens per watt.
Showerheads and faucets shall be equipped with flow restrictors as outlhed in the appliance
efficiency standards and shall be certified to the Lmrgy Conmission.
Masonry and factory-built fireplaces on exterior walls, shall be equipped wit!! tig!ht-fitting
closeable metal or glass doors covering the entire opening or' the firebox; a coabustion ai: intake
equipped wit! a readily accessible, operable, and tight fitking danpe: to draw air froa the outside
of the building; a?d a tigLt fitting flue dqer wit!! a readily accessible con:rol.
Insulation used shall comply with California Qcality Standards.
The insulation installer shall post. a signed certificate. .'.Section. 276..
(All Occupancies). After installing insulation, the installer shall post in a conspicuous location
in the building a certificate signed by the installer and the builder stating that the installation
conforms the requirements of Title 24, Part 2, Chapter 2-53, and that t!!e materials installed
conform with the requirements of Title 20, (hapter 2, Subchapter 4, kticle 3.
shall state the Danufacturer's me and material identification, the installed "R" value, and (in
applications of loose fill insulation) t!!e ninh installed weight per square foot consistent with
the DMUfacturer's labeled density for the desired "R" value.
For infiltration control all openings and penetrations nust be caulked and sealed, such as around
windows, at sole plates, and openings for utility pipes and wires.
Steaa and steam condensation return piping and recirculating hot water
.
Insulation Certificate
?he certificate
DEVELOPMENTAL
SERVlCES
BUILDING DEPARTMENT
THE INFORMATION LISTED BELOW MUST BE SHOWN ON THE TITLE SHEET OF THE PLANS
FOR YOUR SINGLE FAMILY DWELLING
Site Address
Legal Oescri ption
Assessor's Parcel Number
Quantity of Grading in cubic yards
Contact Person - Name and daytime Phone Number
I
Circle any Planning Commission or City Council Action on this Property:
Va r i ance , Coditional Use Permit, Tract or Parcel Map, Zone Change,
Planned Development, Redevelopment Permit, Specific Plan, Site
Development Plan
PLAN CHECK NUMBER
cd 112383
Date I 1(519 I
Prepared by I '3ewl
BUILDING PORTION EUILDING AREA VA LU A TI 0 N VALUE lriULTIPLI ER
-.
-
ADD L\uiTlJ& +3z .s qYL0" = 71;\04
-
I
I +
A ir Cond it ionine: Commercial. .
Residential @
I
I@ .. I I
Res. or Corn.
Fire Sprinklers @
Total Value I I 31, be'
Jurisdiction
VALUATION AND PLAN CHECK PEE
0 Bldg. Dept.
0 Esgil
PLAN CHECK NO. ?2-?7\
BUILDING ADDRESS 5 'FSRyew-r Dlz,
AP?LICANT/CONTACT SCOT WCVZO PHONE NO. 34-1 -6952
BUILDING OCCUPANCY tz -3 DESIGNER PHONE ''
TYPB OF CONSTRUCTION v-d CONTRACTOR PHONE
Building Permit Fee s- d
Plan Check Fee $ \93138 d
COMMENTS:
SHEET OF 12/87
BUILDING PLANCHECK
v) UJ fY
123
SNR
TDD
ccc
HHH
EEE KKK moa
UCIO
duo
UUCI
UUCI
PLANCHECK NO. CF, 9 I- 097 I IX1 ITEM INCOMPLETE
NEEDS YOUR ACTION
PROJECT
ITEMSELECTED
LEGAL REOUIREMENTS Site Plan
H779
1. Provide a fully dimensioned site plan drawn to scale. Show: north arrow, property lines,wemen% existing and proposed structures, streets, existing streeZ improvements,
right-of-way width and dimension setbacks.
2. Show on site plan: &ish floor elevations, pa*\
Plevations, eleva?ro%s4 of _-finish grade adjacent- tgl
building,,-'*existing topographical lines, existing and
proposed slopes, driveway with percent (%) grade and
drainage patterns.
---
3. Provide legal description and Assessors Parcel Number.
Discretionarv Approval Compliance
4. No Discretionary approvals were required.
5. Project complies with all Engineering Conditions of
6. Project does not comply with the following Engineering
Approval for Project No.
Conditions of Approval for Project No.
Conditions complied with by: Date:
Field Review
7. Field review completed. No issues raised.
8. Field review completed. The following issues or
discrepancies with the site plan were found:
A. Site lacks adequate public improvements a B. Existing drainage improvements not shown or in
conflict with site plan.
C. Site is served by overhead power lines.
REV. 02/27/91
\
4 D. Grading is required to access site, create pad or
provide for ultimate street improvement.
E. Site access visibility problems exist. Provide onsite turnaround or engineered solution to problem.
F. Other:
Dedication Recnxirements
do 9. No dedication required.
c3 10. Dedication required. Please have a registered Civil
Engineer or Land Surveyor prepare the appropriate legal
description together with an 8%11 x 1l1I plat map and submit
with a title report and the required processing fee. All
easement documents must be approved and signed by owner(s) prior to issuance of Building Permit. The description of the dedication is as follows:
Dedication completed, Date By:
ImProvement Reauirements
11. No public improvements required. SPECIAL NOTE: Damacred or
defective imProvements found adjacent to buildinu site must be repaired to the satisfaction of the City insPector Prior to OccuDancY.
c3 12. Public improvements required. This project requires
construction of public improvements pursuant to Section
18.40 of the City Code, Please have a registered Civil
Engineer prepare appropriate improvement plans and submit for separate plancheck process through the Engineering Department. Improvement plans must be approved,
appropriate securities posted and fees paid prior to issuance of permit. The required improvements are:
Improvement plans signed, Date: by:
P:\DOCS\MISFORMS\FRMOOlO.DH REV. 02/27/91
I n'[7 13. Improvements
improvements
18.40 of the
deferral of
recent title
are required. Construction of the public
may be deferred in accordance with Section
City Code. Please submit a letter requesting
the required improvements together with a
report on the property and the appropriate
processing fee so we may prepare the necessary Future Improvement Agreement. The Future Improvement Agreement
must be signed, notarized and approved by the City prior to
issuance of a Building Permit.
Future Improvement Agreement completed, Date: By:
On 13a. Inadequate information available on site plan to make a
determination on grading requirements. Please provide more detailed proposed and existing elevations and contours.
Include accurate estimates of the grading quantities (cut, fill, import, export) .
14. No grading required as determined by the information provided on the site plan.
15. Grading Permit required. A separate grading plan prepared
by a registered Civil Engineer must be submitted for
separate plan check and approval through the Engineering
Department. NOTE: The Gradina Permit must be issued and
aradins substantially comDlete and found acceptable to the City Inspector prior to issuance of Buildins Permits.
Grading Inspector sign off. Date: by:
Miscellaneous Permits
16.
17.
Right-of-way Permit not required.
Right-of-way Permit required. A separate Right-of-way Permit issued by the Engineering Department is required for the following:
cmn 20.
Sewer Permit is not required.
Sewer Permit is required. A sewer Permit is required concurrent with Building Permit issuance. The fee required is noted below in the fees section.
Industrial Waste Permit is not required.
P:\DOCS\MISFORMS\FRHOOlO.DH REV. 02/21/91
21. Industrial Waste Permit is required. Applicant must
complete Industrial Waste Permit Application Form and
submit for City approval prior to issuance of a Building Permits. Permits must be issued prior to occupancy.
Industrial Waster Permit accepted -
Date: By:
Fees Rewired
27.
23.
24.
25.
26.
27.
Park-in-Lieu Fee
Quadrant : Fee per Unit:
Total Fees:
Traffic Impact Fee Fee Per Unit: Total Fee:
Bridge and Thorough fare Fee Fee Per Unit: Total Fee:
Public Facilities Fee required.
Facilities Management Fee Zone: Fee :
Sewer Fees Permit No. EDU s
Benefit Area: Fee:
28. Sewer Lateral Required:
Fee :
29. REMARKS:
ENGINEERING AUTHORIZATION TO ISSUE PERMIT
BY: DATE :
P:\DOCS\MISFORUS\FRMOOlO.DH REV. 02/27/91
PLANNING CHEQKLIST
h 1
4iI
sss ddd naa
/dT Bp,
Planner /,!A Phone 438-1161 ext. c/3 22f
(Name)
APN: '
Type of Project and Use &/D(.plZW #&Dm AI
Zone &n/ll-f? Facilities Management Zone 2
Legend
Q
0
Item Complete
Item Incomplete - Needs your action
1, 2, 3 Number in circle indicates plancheck number where deficiency was
identified
df 0 hvironmentd Review Required: YES - NO p( TYPE
DATE OF COMPLETION:
Compliance with conditions of approval? If not, state conditions which require action.
Conditions of Approval
& Discretiormy Action Required: YES - NO TYPE
APPROVAWRESO. NO. DATE:
PROJECT NO.
OTHER RELATED CASES:
Compliance with conditions of approval? If not, state conditions which require action.
Conditions of Approval
DATE OF APPROVAL:
San Diego Coast District, 3111 Camho Del Rio South, Suite 200, San Diego, CA. 92108-1725
(61 9) 521 -8036
Compliance with conditions of approval? If not, state conditions which require action.
Conditions of Approval
dE a Landscape Plan Required: YES - NO
000
See anached
Site Plan:
zoning:
submittal requirements for landscape plm
1.
2.
3.
4.
1.
Provide a Uy dimensioned site plan drawn to scale. Show: ?,'GC>.
arrow, properry lines, easements, exisring and proposed SrNCtCiCS.
streets, existing street improvements, right-of-way Lvidrh 3r.i
dimensioned setbacks.
Show on Site Plan: Finish floor elevations, elevations oi finish ga22
adjacenr 10 building, existing ropographcal lines, exisring and pro?csei
slopes and dnveway.
Provide legal description of propercy.
Protide assessor's parcel number.
Set backs:
Front:
Int. Side:
Street Side:
Rear:
2. Lot coverage:
3. Height:
Required cr' Shown /Jd'
Required /i'S& Shown 6 Required f Shown
Required 3 Shown >3
Required &ggShown Lwff
Required
4. Parking: Spaces Required Shown 2
Guest Spaces Required Shown
OK TO ISSUE AND ENTERED APPROVAL rmo COMPUTER DATE