HomeMy WebLinkAbout2736 LOKER AVE W; D; CB940484; Permit-
-
.
-
B U L DI N.G-.,-P ER MIT - Permit No: CB940484
06/01/94 14:44 • Project No: A9400683
Page -, 1 of 1 - - . -•. .- Development No:
Job Address: 2736 LOKERAV WEST Suite:. D *
Permit Type: INDUSTRIAL TENANT IMPROVEMENT 4 7 06 •6f()1/94; II)61 01 02
Parcel NO:., . Lo' t#: . .• .• . •C---FRt1T .107 00
Valuation: 3,000- •. . .' . - Construction Type: VN
Occupancy Group: Reference#: . Status: ISSUED
Description: DEMISING WALL INTERIOR SPEC Applied: 04/28/94
Apr/Issue: 06/01/94 -
•. Entered '.By: DC
Appl/Ownr : JDM CONSTRUCTION . 619 929479510.
2720 LOKER.AVWEST #S .
CARLSBAD, CA 92008 .
*** Fees-Required '.,', esroliected & Credits- - .\. I:
Fees:-142100 C)
Adjustments: . . . Tota±-..Cr-edits.:' \. . - .00. - - .1 Pay.mer
-.............. . -. Total Fees: . . . 142...00 . ." . Totl t.s:). .\ 35.00
;.. . 'ulance'Dii . ,•:\ .107.00
Fee description Un it s ,vFelJJu!t \ Extt fee Data
BuilLng Permit 54.00
Strong Motion Fee
BUILDING TOTAL 142.00
IIJLiRPC!#TbL
1952 P6
-
IF A PPROVA-
!NSP. DATE 7
CLEARANCE
CITY OF CARLSBAD
2075 Las Palmas -Dr., Carlsbad, CA 92009 (619) 438-1161
PERMIT APPUCA110N
City of Carlsbad Building Department S
2075 Las Palmas Dr., Carlsbad, CA 92009 (619) 438-1161
From List I (see back) give code of Permit-Type: _______
---------------------------------------
For Residential Projects Only: From List 2 (see back) give
Code of Structure-Type:
Net Lass/Gain of Dwelling Units
2. PROJECT I0ORMA11ON
PLAN CHECK NO. W___9fi
EST. VAL_________________
5PLAN CK DEPOSIT 36
VALID. BY
DATE b,..
044 04/28/94 0001 01 02
C-P1T 35-00
FOR OFFICE USE ONLY
02 Energy Calcs 02 Structural Calcs 02 Soils Report Dl Addressed Envelope ,
DESCRIPTION OF WORK
SQ. FT OOM # OF BATHROOMS
NAME (last name first) 5ar/Vr4ks 73 LAc/ w. 3. WNIALi rr.it.J11 tit different from applica
CITY 1t STATE (?)4Z1P CODE DAY TELEPHONE 431--72-3-3
NAME (last name first)4 ADDRESS
CITY STATE ZIP CODE DAY TELEPHONE
PROPERTY OWNER
NAME (last name first) CZ) ADDRESS
CITY STATE ZIP CODE DAY TELEPHONE
CX)NTRACTOR
NAME (last name first) T) M C,6 ADDRESS 27,2f) 2Y 141/t OJ. 3
CI1YAAJI—.6( STATE ZIP CODE DAY TELEPHONE
STATE LIC. # LICENSE CLASS CITY BUSINESS LIC. #
DESIGNER N7017-Mast name first) ,4 , ADDRESS 7
CITY a_-& bie_qi, STATE (* ZIP CODE C7 Li 4 DAY TE LEPHONE STATE LIC. #
workers- Compensation Declaration: I nereoy arrirm mat i nave a certiricate or consent to sell-insure issueo Dy me uirecror or inausrriai
Relations, or a certificate of Workers' Compensation Insurance by an admitted insurer, or an exact copy or duplicate thereof certified
by the Director of the insurer thereof filed with the Building Inspection Department (Section 3800, Lab. Q.
INSURANCE COMPANY POLICY NO. EXPIRATION DATE
Certificate of Exemption: I certify that in the performance 01 the work tor which this permit is issued, I shall not employ any person in any manner
so as to become subject to the Workers' Compensation Laws of California.
SIGNATURE DATE
8. OWNER-BUILDER DECLARA11ON
Owner-Builder Declaration: 1 hereby affirm that 1 am exempt from the Contractor's License Law for the following reason:
0 I, as owner of the property or my employees with wages as their sole compensation, will do the work and the structure is not intended or
offered for sale (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds
or improves thereon, and who does such work himself or through his own employees, provided that such improvements are not intended
or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner-builder will have the burden
V of proving that he did not build or improve for the purpose of sale.).
I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions
Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and contracts for such projects
with contractor(s) licensed pursuant to the Contractor's License Law).
0 I am exempt under Section Business and Professions Code for this reason:
(Sec. 7031.5 Business and Professions Code: Any City or County which requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for such permit to file a signed statement that he is licensed pursuant to the
provisions of the Contractor's License Law (Chapter 9, commencing with Section 7000 of Division 3 of the Business and Professions Code)
or that he il exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit
subjects 'applicant to a civil penalty of nomore th n five hpndred dollars [$500]).
SIGNATURE i/i L A i XLI DATE 2L. g 9_ Q ii
Is the applicant or fuWre building occupant required to submit a business plan, acutely hazardous materials registration form or risk management and
prevention program under Sections 25505i'5533 or 25534 of the Presley-Tanner Hazardous Substance Account Act?
YES V NO
Is the applicant or future building occup.p('equired to obtain a permit from the air pollution control district or air quality management district?
YES
Is the facility to be constructed within 1,Q9ieet of the outer boundary of a school site?
DYES [VNO
IF ANY OF THE ANSWERS ARE YES, A FINAL CERTIFICATE OF OCCUPANCY MAY NOT BE ISSUED AFTER JULY 1, 1989 UNLESS THE APPLICANT
HAS MET OR IS MEETING THE REQUIREMENTS OF THE OFFICE OF EMERGENCY SERVICES AND THE AIR POLLUTION CONTROL DISTRICT.
9. WNSTRUCI1UN LENDING AGENCY
I hereby affirm that there is a construction lending agency for the performance 01 the work for which this permit is issued (Sec 3097(i) Civil Code).
LENDER'S NAME. ,44 1(..t.._ LENDER'S ADDRESS
I certify that I have read the application and state that the above information is correct. I agree to comply with all City ordinances and State laws
relating to building construction. I hereby authorize representatives of the City of Carlsbad to enter upon the above mentioned property for inspection
purposes. I ALSO AGREE 10 SAVE INDEMNIFY AND KEEP HARMLESS THE CITY OF CARLSBAD AGAINST ALL LIABILITIES, JUDGMENTS, COSTS
AND EXPENSES WHICH MAY IN ANY WAY ACCRUE AGAINST SAID CITY IN CONSEQUENCE OF THE GRANTING OF ThIS PERMIT.
OSHA An OSHA permit is required for excavations over 5,0" deep and demolition or construction of structures over 3 stories in height.
Expiration. Every permit issued by the puilding Official under the provisions of this Code shall expire by limitation and become null and void if the
building or work authorized by such pmit is not commenced within 36 days from the date of such permit or if the building or work authorized by
such permit is suspended or aba4nçd at any time after the work is 5s me c for a od of 180 days (Section 30 3( Unirm uilding Code).
APPUCANT'S SIGNATURE
0-,
CITY OF CARLSBAD
- INSPECTION REQUEST
PERMIT# CB940484 FOR 07/08/94 INSPECTOR AREA TP
DESCRIPTION:.DEMISING WALL INTERIOR SPEC PLANCK# CB940484
OCCGRP
TYPE: ITI CONSTR. TYPE VN
JOB ADDRESS: 2736 LOKER AV WEST STE: D LOT:
APPLICANT: JDM CONSTRUCTION 0 PHONE: 619-929-9510
CONTRACTOR: PHONE:
OWNER: PHONE:
REMARKS: MW/JERRY/929-9510 INSPECTOR /
SPECIAL INSTRUCT: -
TOTAL TIME: 0
0 0
CD LVL DESCRIPTION 0 ACT COMMENTS -.
19 ST Final Structural Wo 0
29. PL Final Plumbing
39 EL Final Electrical. 0 -
49 ME Final Mechanical 0 -
***** INSPECTION HISTORY
DATE
0
DESCRIPTION ' ' 0 ACT INSP COMMENTS - 0
061594 Interior Lath/Drywall - CO TP NEED TOP TRACK APPROVAL
061494 . Frame/Steel/Bolting/Welding CO PK 'SEE NOTICE OF 6/14/94
060994 Frame/Steel/Bolting/Welding CO - PD - NO ACCESS -
0
CITY OF CARLSBAD
INSPECTION REQUEST
PERMIT# CB940484 FOR 06/15/94 INSPECTOR AREA
DESCRIPTION: DEMISING WALL INTERIOR SPEC S PIANCK# CB940484
OCCGRP
TYPE: ITI CONSTR. TYPE VN
JOB ADDRESS: 2736 LOKER AV WEST STE D LOT:
APPLICANT: JDM CONSTRUCTION PHONE: 619 922
*'
CONTRACTOR: S PHONE:
OWNER: S PHONE:
REMARKS: BJN/JERRY/929-9510 INSPECTOR
SPECIAL INSTRUCT:
f S -
TOTAL TIME:
CD SLVL DESCRIPTION ACT COMMENTS
17 ST Interior Lath/Drywall
***** INSPECTION HISTORY *****
DATE DESCRIPTION ACT INSP COMMENTS
060994 Frame/Steel/Bolting/Welding CO PD NO ACCESS
- 1'c p S
SCai.*2 &
- - - -
S.....
AVEWL DESIGN
9807 CAt4ItiIIO CUDRO.
SAN DIEGO, CA. 92129
AltA
Fix No - -.
Protect Nsme: aAWAtC41 Y?4')
Date! .- 1
No. Of Ps8e& - --- - - Uv,cIud,ia Udi
T&cphs .. Lf',L4 -4f
Fax No.
Poe #p?Ov*$ 0
Po, Your U.
As qiI.d 0
$6? R*øtw & CoumM 0
City Of. Carlsbad
FAX TRANSMITTAL
2 \- NUMBER OF PAGES BEING TRANSMITtED
T1E. SENT: qo
TO: L4'fr' ,'AøfJ1'%'4 bL—.
CCPANY:
?ONE
FAX
#: '38- O8?1••
CO-/57
tjiNLLUN.J rt% r%Au,4 aivu i iru..J
FROM:
DEPT:
PHONE #: (619) 438-1161 ext.
FAX #: (619 4380894
SPECIAL INSTRUCliONS:
IdI/,4L'ii Arn'Jr C4ke2 All,
,,•v / 'L •& wc- vP±2 I21N)
4A.) 77J/ f -
4i9 1 4i479 1&)YD ',---
I12mirnma (r4 • Crfbpd. CpHforni 92009 • (819) 438-1181
JUN-23-94 FRI 17:08 P.01
AVENT DESIGN 9807 CAMINITO CUADAO SAN DIEGO CALIFORNIA 92129 619.484.9481
tQ iL
T
.SLEk) VA 41 D1 OFTL4D
I •
bFI.71'
r ---- "-r ..............-. - TI
J — LL
-•
nclosures:
- ESGIL CORPORATION kiH1
DGA 0c.i DPc
4.
ESGIL CORPORATION
9320 CHESAPEAKE DR., SUITE 208
SAN DIEGO, CA 92123
-(619) 560-1468
D7TE: -5I 2.0/ fl.AP?LiC..NT
JURISDICTION: Qc is ~o oc( L..PL %N
PLAN CEC O SET I U?S
PROJECT DRESS LokcIS
:
PROJECT NA!E:I\'\+kDr &c + couseTL
The plans transmitted herewith have been corrected where
U necessary and substantially comply with the jurisdiczicn's
building codes. -
The plans transmitted herewith will substantially comly
with the jurisdiçio1's buildin9 coes whe'n minor deficien-
cies identified fle iacK bdôjare resolved and
- - checked by building deartment staff..
n The plans transmitted herewith have significant deficiencies
identified on the enclosed check list and should be corrected
and resubmitted for a complete recheck.
The check list transmitted herewith is for your information.
The plans are being held at Esgil Corp. until corrected
plans are subthitted for recheck.
F~The aplicant's copy of the check list is enclosed for the
jurisdiction to return to the applicant contact person.
E The-applicant's copy of the check list has been sent 'Co:
Esgil staff did not advise the applicant contact person that
plan check has been completed.
Esgil staff did advise applicant that the plai check has
been completed. Person contacted:
ESGIL CORPORATION
9320 CHESAPEAKE DR., SUITE 208
SAN DiEGO, CA 92123
(619)560-14368
5/5) 94 flA??LICANT I I i ____ JURISDICTION: LPL.;N CC.K1
'TTZ' co
?L-.N c-CK NO: 9444 SET: I UPS - -
DSIGN
P?OJECT ADDRESS.:'i.73(c' t_okcc Avc ..-t--D
- -
?OJECT -E L'n -rc-)c- 10-ccli.11 -(-
The plans transmitted herewith have been corrected where
U necessary and substantially cornoly with the jurisdiction's
building codes.
The olans transmitted herewith will substntiallv comolv
with te JL:1sdc-10-'s building codes when _nor aef1c1e---
des de-ti-fed are resol v ed and
checked by bui lding department staff.
--- The plans transmitted herewith have significant deficiencies
U identified on the enclosed check list and should be corrected
and resubmitted for a àomolete recheck.
The check list ransm1ttea herewith is for your information.
The plans are being held at Esgil Corp. until corrected
plans are submitted for recheck.
t o ffl The apolican's co of the check list is enclosed for the : jurisdiction to return to the applicant contact person.
The aoolicnt's coov of the heck list has been sent to:
JlTho ±fece
1 cc Av W Lk Cc( 90
Esgil staff did not advise the applicant contact person that
plan check has been comoleted)(Ce
:
Esgil staff did advise applicant that the plan check ha
been comoleted. Person: contacted:
Date contacted: Telephone
( ri
3y&J,&CV Enclosures:
ESGIL CORPOR;TI0N4./94 -
El GA E CM •El PC
DEPARTMENT OF STATE ARCHITECTURE-NON RESIDENTIAL
TITLE 24 DISABLED ACCESS REQUIREMENTS
SCOPE:
The following disabled access items are taken from the .1991 edition of California Administrative Code Title 24,
applicable as of April 1, 1994. Per section 110 B, all publicly and privately funded public accommodations and
commercial facilities shall be accessible to persons with physical disabilities as follows:
(1.) Any building, structure, facility, complex, or improved area, or portions thereof, which are used
by the general public.
Any sanitary facilities which are made available for the public, clients, or employees in such
accommodatiohs or facilities.
Any curb or sidewalk intended for public use that is constructed with private funds.
All existing accommodations when alterations, structural repairs or additions are made to such
accommodations.
GENERAL: To assure that barrier-free design is incorporated in all buildings, facilities, site work and other
improvements, these standards apply to all additions, alterations and structural repairs. These
standards incorporate the requirements covered in Title II and Ill of the Americans with Disabilities
Act of 1990. Items preceeded with an asterisk () are examples of changes that have occured
since the previous regulations.
NOTE: All Figures and Tables referenced in this checklist are printed in California Administrative Code,
Title 24.
SITE ACCESSIBILITY:
'Site development and grading shall be designed to provide access to all entrances and exterior ground
floor exits, and access to normal paths of travel, and where necessary to provide access, shall
incorporate pedestrian ramps, curb ramps.. etc.
• When more than one building or facility is located on a site, accessible routes of travel shall be provided
between buildings and accessible site facilities.
At every primary public entrance and at every major function along or leading to an accessible route of
travel, there shall be a sign displaying the international symbol of accessibility. Signs shall indicate the
direction to accessible building entrances and facilities.
Where stairways occur outside a building, see section 3306(q) for requirements.
DISABLED ACCESS PARKING SPACES:
The required number of accessible parking spaces in new facilities (or in existing facilities where a
nge of occupancy occurs) is as follows per Table 31A:
• 1 for each 25 spaces up to. 100 total spaces.
. 1 additional space for each 50 spaces'for between 101 and 200 total spaces.
'1 additional space for each 100 spaces for between 201 and 500 total spaces.
'4. For between 501 and .1000 total spaces, a minimum of 2% of the total number of spaces is
required.
For greater than 1000 spaces, 20 plus 1 for each additional 100 spaces.
If, total number of spaces is less than 5, one shall be 14'0 wide and 'line to provide a 9'0"
parking area and 5'0 loading and unloading area. There is no requirement that this space be
identified or reserved for the exclusive use by persons with disabilities.
B. • Outpatient facilities require a minimum of 10% of the total number of. spaces to be accessible. If facilities
specialize in treatment of people with mobility impairments, a minimum of 20% of the total spaces shall
be accessible. See section 3107A(a)3.a and b.
'C. Vat parking facilities shall provide a passenger loading zone located on an accessible route to the facility
entrance. The space requirements of section 3107A apply to facilities with valet parking, per section
'3108A(c).
D. • Accessible spaces shall be located as follows, per section 3107A(a)1: ,
, On the shortest possible route to an, accessible entrance when serving a particular building.
On the shortest route of travel to an accessible entrance of a parking facility.
Non-Residential Access Requirements Page 2
Plan Review Correction list April 15, 1994
3. Dispersed and located closest to accessible entrances where buildinos have multiple accessible
entrances with adjacent parking.
Note: This section does not apply to existing facilities where local crdinances preclude requirements
unless a change of occupancy occurs.
Single spaces shall be 14'O" wide and outlined to provide a 9'0 parking area and a 5'0 loading and
unloading area on the passenger side of the vehicle. When more than one space is provided, in lieu of
providing a 14'0" space for each space, two spaces can be provided within a 23'0 area with a 5'0
-loading zone betvveen each 9'0" wide space. Each space is to be a minimum of 10-0" in depth. See
section 3107A(b)1.
NOTE: See Figures 31-18A. 31-18B and 31-18C.
A bumper or curb shall be provided and located at each space to prevent encroachment of cars into the
required width of walkways per section 3107A(b)3.
The' maximum slope of parking surfaces in any direction shall not exceed I per foot (2.083%) per
section 3107.1(b)4. The maximum slope at the passenger loading zone shell not exceed 2%.
Parking spaces shall be identified by areflectorized sign permanently posted immediately adjacent to and
visible from each space, consisting of a profile view of a wheelchair with occupant in white on dark blue
background. The sign shall not be smaller than 70 square inches in area and, when in a path of travel,
shall be posted at a minimum height of 80" from the bottom of the sign to parking space finished grade.
Signs may also be centered on the wall of the interior end of the parking space at a minimum height of
36 from the parking space finished grade, ground or sidewalk. Spaces complying with section 31 07A(b)2
shall have an additional sign "Van-Accessible" mounted below the symbol of accessibility per section
3107A(c). In addition, each accessible space is required to be marked with the international symbol of
accessibility.
1. An additional sign shall also be posted in a conspicuous place at each entrance to off street parking
facilities, or immediately adjacent to and visible from each stall or space. The sign shall be not less than
17" by 22 with lettering not less than 1" in height. Per section 3107A(c) required wording is as follows:
"Unauthorized vehicles parked in designated accessible spaces not displaying distinguishing
placards or license plates issued for persons with disabilities may be towed away at owner's
expense. Towed vehicles may be reclaimed at ' or by telephoning
Where provided, all passenger loading zones and at least one vehicle access route from site entrances and
exits shall have a minimum vertical clearance of 114" per section 3108A(b)2.
Space(s) shall be located so that disabled persons are not compelled to wheel or walk behind parked cars
other than their own per section 3107A(b)3.
All vertical entrances to and vertical 'clearances within parking structures shall have a minimum vertical
-clearance of 8'2" where required for accessibility to accessible parking spaces.
• A minimum of one in.rory 8 000essib+e spaces shall be served by an access aisle 96" minimum width
and shall be designated van accessible per section 3107A(b)2. All such spaces may be grouped on one
level of a parking structure.
• Provide a passenger access aisle, 60" by'20'0", adjacent and parallel to the passenger loading space per
'section 3108A(b).
CURB RAMPS:
NOTE: See Figures 31-19A through 31-22.
Curb ramps shall be constructed at each corner of street intersections and where a pedestrian way
crosses curb per section 3106A(e).
'Curb -ramps shall be a minimum of 48" wide with a maximum slope of 1:12 (8.33%), per sections
3106A(e)2 and 3106A (05. The lower end of each curb ramp shall have a 1, lip be beveled at 45
degrees.
• The landing at the top of the curb shall be level and 48" minimum depth for the entire width of the curb
ramp or the slope of the fanned or flared sides shall not exceed 1:8(12.5%), per section 3106A(e)4.
The-surface of all curb ramps and its flared sides shall be slip resistant and contrasting from the adjacent
sidewalk finish per section 3106A(e)6.
All curb ramps shall have,a grooved border 12" wide at the level surface of the sidewalk along the top
and each side approximately 3,
* on center per section 3106(e)7.
DF• Detectable warnings extending ti,e full width and depth of the curb ramp inside the grooved border if the
slope is between 1:15 (6.66%) and 1:20 (5%), per section 3106A(e)8. This shall consist of raised
truncated domes with a diameter of 0.9" at the base tapering to 0.45" at the top. Spacing shall be 2.35"
D
I'Jon-Rasifintial Access Requirements Page 3
Plan Review Correction list April 15, 1994
centerto-center.
NOTE: See Figure 31-23.
Locate curb ramps to prevent obstruction by blocked cars per section 3106A(e)9.
The slope of adjacent surfaces, including street and gutter, within 4 feet of ramps shall be limited to a
maximum of 1:20 (5%), per section 3106A(e).
WALKS AND SIDEWALKS:
Walks sloping greater than 1:20 (5%) must comply with the ramp requirements of section 3307 per
section 3324(c).,
B. Walks shall be 48 minimum in width and have slip resistant surfaces.
The maximum cross slope shall not exceed 'U per foot per section 3324(a).3 If the enforcing agency
find's that an unreasonable hardship exists, then the maximum cross slope may be increased to a
maximum of / per foot for distances not to exceed 20 feet.
Abrupt level chnges shall not exceed 'U along any accessible route. When changes do occur, they shall
,be beveled with a slope of no greater than 1:2 Level changes of 'I or less may be vertical. Note: If level
charges exceed 'U they must comply with requirements of cur b ramps.
At each gate or door, a 60 x 60 level area is required when the gate or door swings toward the walk
per section 3324(e). Walks shall extend 24 minimum to the side of the strike edge of a door or gate that
swings toward the walk.
NOTE: See Figure 33-2.
Provide 80 minimum headroom from all walkway surfaces to any obstruction per section 3325(b).
At walks with continuous gradients, level areas at least 5'0 long at intervals of 400 feet are required per
section 3324(f).
Grating openings are to be limited to a maximum of in the direction of travel per section 3324(b).
1.• Provide 36 wide detectable warning material at the boundary between walkways and vehicular ways.
Material shall comply with criteria of section 3325A(c)1, per section 3325(e).
J. • Where more than one route, is provided, all routes shall be made accessible per section 3103A(i)2.
PEDESTRIAN RAMPS:
A path of travel with a slope exceeding 1:20(5%) shall be considered a ramp per section 3307(a.1).
Handrails are required to be provided at each side of ramps.
The maximum allowable slope for accessible ramps is 1:12 (8.33%), per section 3307(e.1)1. Provide the
least possible slope for all ramps.
The maximum cross slope at walks and sidewalks shall not exceed per foot (2%) per section
3324(a)3. If the enforcing agency finds that an unreasonable hardship exists, then the maximum cross
slope may be increased to a maximum of 'U per foot (4%) for distances not to exceed 20 feet.
'Ramp surfaces shall be slip resistant, per section 3307(g).
Landings are required at the top and bottom of all ramps, per section 3307(d.1). The bottom landing shall
be a minimum of 72 in the direction of travel and the top landing shall be a minimum of 60 x 60.
A60 intermediate landing is required at maximum elevation changes of 30. A 72 landing is required
at direction changes exceeding 30 degrees per section 3307(d.1)6.
When 'a door swings over the top landing, the minimum depth of the landing shall equal to the door width,
plus 42, per section 3307(d.1).
'Strike edge distances to door shall be 24 at exterior ramps (end 18 at interior ramps), per section
3307(d.1).
I When the slope of ramps exceeds 1:20 (5%), handrails are required at each side, per section 3307(e.1).
J. Handrails shall be 1Y to 1Y2 in'crosssection and placed a minimum of 1 Y2 from walls, per section
K. , Per section 3307(e.1), handrails shall meet the following requirements:
Be Continuous.
Located 34 to 38 in height above the ,ramp surface.
3.,.' • Have 12 extensions beyond the top and bottom.
4. Ends shall be returned. '
L. If ramp exceeds 10'0 in length (and ramp is not bounded 'by walls, curbs or wheel guides shall be
provided, per section 3307(h.1).
M. • Wall surfaces, adjacent to handrails, shall be free of sharp.or abrasive elements, (i.e., no stucco), per
section 3307(e.1).
D:/NR/G
Non-Residential Access-Requirements Page 4
Plan Review Coiiection List April 15, 1994
ENTRANCES AND CIRCULATION:
" All entrances and exterior ground level exits shall be made accessible, per section 3301 N.
B. • When a building, or portion of a building, is required to be accessible (or adaptable), an accessible route
of travel shall be provided to all portions of the building, to accessible building entrances and between the
building and the public way. See section 3103A(i)2. .
DOORS:
A. Per section 3304(f), every required passage door shall have a minimum 32" clear width.
Door hardware shall be of the lever or push type and mounted 30" to 44" above the floor,, per section
3304(c.1).
C. Per section '3304(i.1),regardless of the occupant load, there shall be a level floor or landing on each side
of the door. The floor or landing shall not be more than 1, lower than the threshold of the doorway.
Note: An exception is permitted for exterior landings, whic2h may slcoe up to per foot (2%) in any
direction, for surface drainage, per section 413.
D. Per section3304(c.1), all hand-activated door opehing hardware shall meet the following requirements:
Shall be centered between 30" and 44" above the floor.
'Latching and locking doors that are in a path of travel shall be operated with a single effort by
lever type hardware, panic bars, push-pull activating bars or other hardware designed to provide
passage without the ability to grasp the opening hardware.
Locked doors shall exit in the direction of travel.
E. ,the lower 10" of all doors shall be smooth and uninterrupted to allow the door to be opene.d by a
wheelchair footrest without creating a trap or hazardous condition. Narrow frame doors may use a 10"
'high smooth panel on the push side of the door.
F. Where, turnstiles are used to provide fully controlled access, such as where an admission price is charged,
a door or gate that is accessible to persons with disabilities, shall be provided adjacent to or within 30'0"
from each turnstile entrance or exit. This passageway shall provide 32" clear opening and-remain unlocked
during business hours.
G. The width of the level area, on the side to-which a door (or gate) swings, shall be as follows per section
3304(i.1):
'Extend 24" past the strike edge of the door for exterior applications. -
Extend 18" past the strike edge of the door for interior conditions.
Extend 12" past the strike edge on the. push side if door has latch and closer.
H. The space between two consecutive door openings in a vestibule, serving other than a required exit
stairway shall provide a minimum of 48" of clear space from any door opening into the vestibule when
door .is open 90 degrees, per section 33046.1). Doors in series shall swing either in the' same direction
or away from the space between the doors.
I. Maximum effort to operate doors shall not exceed 81/ pounds for exterior doors and 5 pounds for interior
-doors. Such push or pull effort shall be applied at right angles to hinged doors and at the center plane for
sliding doors. Where fire doors are required, the maximum effort to operate the door may be increased
to 1.5 pounds. See section 3304(i.2)1. -
J. • Per section 3304(i.1)2.B, the level area at floors or landings shell have a length at least 60" in the
direction of door swing and at least 48" (or 44" if doors don't have latches or closers) in the direction
-opposite the door swing. NOTE: See Figure 33-2. -
K. 'Where a door opens into a stair of a smokeproof enclosure, the required landing need not have a length
of 60". per section 3304(i.1)2D(1). -
SPECIAL HAZARDS: - - - - -
'Objects-projecting from walls with their leading edges between 27" and 80" above the finished floor shall
protrude no more than 4". into walks, halls, corridors, passageways or aisles. Objects mounted at or below
27f above the finished floor may protrude any amount. Freestanding objects mounted on posts or pylons
may overhang 12 maximum from 27" to 80" above the ground surface or finished floor.
Abrupt changes in level exceeding 4 adjacent to walks, such as at planters or fountains, except between
walks and adjacent streets or drives,, shall be identified by 6" high warning curbs projecting at least 6"
-above the walk surface per section 3325(a) except when a guardrail or handrail is provided. If a guardrail
-or handrail is provided, no curb is required when a guide rail is provided centered 3" Ci 1") above the
- -
-
Non-Residential Access Requirements Page 5
Plan Review Correction List April 15, 1994
surface of the walk or sidewalk.
If a walk crosses or adjoins a vehicular way and the walking surfaces are not separated by curbs or other
elements, the boundary shall be defined by a continuous detectable warning which is 36" in width. The
surface shall be raised truncated domes in a staggered patten with a diameter of nominal 0.9" at the base
tapering to 0.45" at the top, a height of 0.2" and a center to center spacing of nominal 2.35".
At transit boarding platforms, the pedestrian access shall be identified with a. directional detectable
texture. The raised bars shall be 1.3" wide and 3" from center-to-center off each bar. This surface shall
be placed behind yellow detectable warning texture (truncated domes) and aligned with all doors of transit
vehicles.
NOTE: See Figure 31-23.
If carpet or carpet tile is used on a ground or floor surface in a common use area, it shall have firm
backing or no backing. The maximum pile height shall be 'I '. Exposed edges of carpet shall be fastened
to floor surfaces and have trim along the entire edge of the 2exposed edge and trim shall comply with the
requirements for changes in level.
STAIRWAYS AND HANDRAILS:
Handrails are required on each side of stairs, per section 3306(i.1)1.
• Handrails shall be located 34" to 38" above the nosing of the treads.
Handrails shall extend a minimum of 12" beyond the top nosing and 12 plus the tread width beyond the
bottom nosing.
* The handgrip portion of handrails shall not be less than 1'1" nor more than 11 /".in cross sectional
dimension or the shape shall provide an equivalent grippingsurface. The handgrip portion shall have a
smooth surface with no sharp corners.
* Handrails shall be designed to provide a grasping surface to avoid the person from falling. The spacing of
brackets shall not exceed 8 feet and be such that the attachment is capable of withstanding a load of at
least 200 pounds applied in any direction at.any point on the rail.
Per section 3306(p), approved stairway identification signs, showing whether or not a roof access exists,
the floor level, and the upper and lower level of the stairway terminus, shall be located at each floor level
in all enclosed stairways in buildings two or more stories in height. The information is to be shown using
raised Arabic numerals and raised braille symbols which conform to section 3105A(e)3. The sign shall be
located approximately 5'0" above the floor landing and readily visible when the door is open or closed.
The upper approach and the lower tread of each stair shall be marked by a strip of clearly contrasting color
at least 2" wide and placed parallel to and not more than 1" from the nose of the step or landing. The strip
shall be as slip resistant as the other treads of the stair. For exterior stairs, the upper approach and all
treads shall be marked.
Tread surfaces shall be slip resistant and smooth, rounded or chamfered exposed edges and no abrupt
edges at the nosing. Nosing shall not project more than Ih/ past the face of the riser above. Risers shall
be solid (open risers are not permitted). 2
Per section 3306(i.1)2F, handrails projecting from.a wall shall have a space of .1 between the wall and
the ráil.Handrails may be located in a recess maximum 3" deep extending at least 18" above the top of
the rail. Wall surfaces, adjacent to handrails, shall be free of sharp or abrasive elements, (i.e., no stucco)
per Sec. 3306(i.1)2.F.
ELEVATORS: Per section 5103(d.1)', in buildings two or more stories in height, served by elevator(s), all
elevators shall comply with the requirements contained in Chapter 51 of Title 24.
A. Elevators shall be automatic and be provided with a self leveling feature that will automatically bring the
car to the floor landings with a tolerance of ( +I)'!" under normal loading and unloading conditions. The
clearance between the car platform sill and the edge of the hoistway landing shall be not greater than
per section 5103(d.1)1.
Thminimum clear width for elevator doors shall be 36", per section 5103(d. 1)3.
boors shall be provided with a door reopening device, which will function to stop and reopen a car door
and adjacent hoistway door in case the door is obstructed while closing. See. section 51.03(d.1)4 for
additional requirements.
Per section 5103(d.1)6, the elevator car inside shall comply with the following requirements:
1.. The minimum clear distances between walls, or between the walls and door, excluding return
D./NR/G
Non-Residential Access Requirements Page 6
Plan Review Correction-List April 15, 1994
panels, shall be not less than
80" by 54" (for center opening doors).
68" by 54" (for side-slide opening doors).
C. Minimum distance from walls to return panel shall not be less than Si"
NOTE: See figure 51-A for further details.
A handrail shalt be provided on one wall of the car, preferably the rear. The rails shall be smooth and the
inside surface at least 1/ clear of the walls at .a nominal height of 32" from the floor. Nominal = ( /)i.
Call operation buttons 2 shall be within 3'6" of the floor. See section 5103(d.1)8 for 'additional
requirements.
Special access lifts may be provided between levels, in lieu of passenger elevators, when the vertical
distance between landings, structural design and safeguards are permitted by the State of California,
Division of the State Architect, Access Compliance Section, the Department of Industrial Relations,
Division of Occupational Safety and Health, and any applicable safety regulations or other administrative
authorities having jurisdiction.
If lifts are provided, they shall be designed and constructed to facilitate unassisted entry, operation and
exit from the lift. See section 5107(a) for specific requirements.
SANITARY FACILITIES:
S
Sanitary facilities that.serve buildings, facilities, or portions of buildings or facilities that are required to
be-accessible to persons with disabilities, shall be made accessible unless the enforcing agency determines
that compliance with these standards .would create an unreasonable hardship and equivalent facilitation
is provided per section 3105A(b) 1.
B. See exceptions, to section 3105A(b)1. regarding the requirements for equivalent facilitation under
unreasonable hardship.
Accessible sanitary facilities must be usable by a physically disabled person within a reasonable
distance of accessible areas.
Equivalent facilitation would provide for either a lateral or front transfer toilet stall.
NOTE: See Figure 31-1C.
Doors shall have a clearand unobstructed opening of at least 30".
C. Per section 3105A(b)1.A, where separate facilities are provided for nondisabled persons of each sex,
separate facilities shall be provided for the disabled persons of each sex as well. Where unisex facilities
are provided for nondisabled/disabled persons, such unisex facilities shall be provided for the disabled.
D. Where facilities are to be used solely by children, the specific heights may be adjusted to meet their
accessibility needs per Section 3105A(b)1.B.
E. Per section 3105A(b)1.C., passageways leading to sanitary facilities shall have clear access widths as
specified in chapter 33. All doorways shall have a minimum 32" clear opening and a level and clear area
for a minimum depth of 60" in the direction of the door swing and 44" where the door swings away from
the level and clear area. In addition, all.strike edge clearance dimensions are required to be met.
F. Doorways leading to mens sanitary facilities shall be identified by an equilateral triangle thick with
edges 12" long and a vortex pointing upward. Women's facilities shall b.e identified by a' circle, 1 thick,
12" in diameter. Unisex facilities shall be'dentified by a circle with a triangle superimposed on the circle
and within the 12" diameter. The required symbols shall be centered on the door at a height of 60". See
* section 3105A(b)i .D. See 3105A(e)10 for additional signage.
MULTIPLE ACCOMMODATION SANITARY FACILITIES:
A. Sanitary facilities that serve buildings, facilities, or portions of buildings or facilities that are required to
be accessible to persons with disabilities, shall be made accessible unless the enforcing agency determines
-that compliance with these standards would create an unreasonable hardship and equivalent facilitation
'is provided per section 3105A(b) 1.
B. 'Per section 3105A(b)3.A.(ii), a water closet fixture located in a compartment shall provide the following:
. A minimum of 28" clear space from a fixture or a minimum of 32" wide clear space from a wall
- at one side.
A minimum of 48" long clear space shall be provided in front of the water closet if the
compartment has a end opening door (60" is required for side opening doors).
Grab bars shall not project more than 3" into the clear spaces indicated.
D
Water closet doors shall be equipped with a self closing device and have a minimum 32" clearance when
D/NR/C
Non-Residential Access Requirements Page 7
Plan Review Correction list April 15, 1994
located at the end (and 34 when located at the side). See section 3105A(b)3.A.(iii).
D. When standard compartment doors are used, with minimum 90 clearance for footrests underneath and
a self closing device, the clearance at thestrike edge as specified in section 3304(i.1 )2C. is not required.
SINGLE ACCOMMODATION FACILITIES:
As per section 3105A(b)3.B., there shall be a sufficient space in the toilet room for a wheelchair
measuring 30" x 48° to enter the room and permit the door to close. No door shall be permitted tc
encroach into this space. There-shall be a clear floor space at least 60° in diameter, or a T-shaped space
as shown in Figure 3 1-12 (a) and (b). Doors are not permitted to encroach into this space.
B. The water closet shall be located in a space which provides a minimum 28" clear space from a fixture or
32" clear space from a wall on one side. A minimum of 48" clear space shall be provided in front of the
water closet.
For bathrooms serving hotel guest rooms, see section 1214(d).
RESTROOM FIXTURES AND ACCESSORIES:
A. In new construction, water closets in accessible restrooms shall meet the following requirements per
section 5-1502:
The height of the water closet seat shall be between 17° and 19°.
The controls shall be operable with one hand and shall not require tight grasping; pinching or
twisting of the wrist.
The controls for flush valves shall be mounted on the side of the toilet area and be no more than
44" above the floor.
The force required to activate the controls shall be no greater than 5 pounds of force.
B. Urinals inaccessible
In alterations where the existing fixture is less than 15° high, a 3° seat shall be permitted.
restrooms shall meet the following requirements per section 3105A(h)4. and 5-1503:
The rim of at least one urinal shall project 14° from the wall and be located 17° maximum above
the floor.
The force required to activate the flush valve shall be a maximum of 5 pounds of force.
The control mechanism shall be located a maximum of 44" above the floor.
A minimum of 30" x 48" clear floor space shall be provided in front of the urinal.
C. 'Lavatories shall comply with the following requirements per section 3105A(b)4.A., 3105A(h)4. and 5-
1504:
1. A minimum of 30° x 48" clear space shall be provided in front of the lavatory for forward
approach. The clear space may include knee and toe space beneath the fixture.
2. The-clear space beneath lavatories shall be a minimum of 290 high x 30" wide x 8" deep at the
top and 9" high x 30" wide and 17° deep at the bottom from the front of the fixture. The
maximum height of the counter top shall be 34"
3. All hot water and drain pipes under the lavatory 'shall be insulated.
4. The faucet controls and operating mechanism shall be of the type not requiring tight grasping,
pinching or twisting of the wrist and have an operating force of not greater than 5 pounds.
5 If self-closing valves are used, they shall remain open for at least 10 seconds.
0. Showers and shower compartments shall comply with the requirements of sections 5-1505 and
3105A(b)5. and 6:
Compartments shall be 42" in widthbetween wall surfaces and 48° in depth with an entrance
opening of 36° minimum.
NOTE: See Figure 31-2A.
Grab bars shall comply with section 3105A(b)3.C.(ii), (iii) and (iv). They shall be located on walls
adjacent to and opposite the seat and mounted 33" to 36" above the shower floor.
NOTE: See Figure 31-2A.
When a threshold or recessed drop is used, it shall be a maximum of 'I" in height and shall be
beveled or sloped at an angle of not more than 45 degrees from the horizontal.
4• The shower floor shall slope toward the rear of the compartment to a drain located within 6" of
- the rear wall. Maximum slope of the floor shall be /
" per foot in any direction.
5. The floor surface shall be of Carborundum, grit faced tile or of material providing equivalent slip
resistance.
6. A folding seat located on the wall opposite the controls and mounted 18" above the floor shall
be provided.
D/N.R/C
Non-Residential Access Requirements Page 8
Plan Review Correction list April 15, 1994
NOTE: See Figure 31-2A.
The soapdish shall be located on the control wall at a maximum height of 40" above the shower
floor.
Showers in all occupancies shall be finished as specified in section 31 05A(b)5 to a height of not
less than 70" above the drain inlet.
Where no separate shower compartment is provided, the shower shall be located in 'a corner with
L-shaped grab bars extending along two adjacent walls with a folding seat adjacent to the shower
controls.
A flexible hand-held shower unit, with a hose at least 60 long shál be provided with head
rnounting height of 48" A.F.F. Twowall-mounted heads may be installed in lieu of the hand-held
unit in areas subject to excessive vandalism per section 5-1505.
E. • Per section 5-1506, bathtubs shall be provided, with a shower spray unit having a nose at least 50" long
that can be used as a shower. Enclosures shall not obstruct controls or transfer from a wheelchair. Tracks
of enclosures shall not be mounted on their rims.
NOTE: See Figures 31-8, 31-9A and 31-913.
F. Grab bars shall comply with the following per section 3105A(b)3.C.:
Grab bars shall be located on each side or one side and the back of the physically disabled
accessible toilet stall or compartment. They. shall be securely attached 33 above the floor and
parallel except where a tank-type toilet is used which obstructs placement at 33", the grab bar ,
may be installed as high as 36".
Grab bars at the side shall be located 15" to 161/n (/l") from the center line of the water closet
stool and be at least 42—long with the front end 2positoned 24" in front of the stool. Total length
of bars at the back shall not be less than 36".
'The diameter or width of the grab bar gripping surface shall be 1 1/n to 1 'I" or the shape shall
provide an equivalent gripping surface. If mounted adjacent to a wall, the space between the wall
and the grab bar shall be 1 /
'See section 31 05A(b)3.C.(iiif for structural strength requirements.
NOTE: See Figures 31-1A, 311B, 31-1c, 31-2A, 31-9A and 31-98.
G. • Per section 3105A(b) and (c), where lockers are provided for the public, clients, employees, members or
participants, at least one and not less than 1 % of all lockers shall be made accessible to the physically
disabled. A path of travel of not less than 36" in clear width shall be provided to those lockers.
H. Where towel, sanitary napkins, waste disposal and other similar dispensing and disposal fixtures are
provided, at least one of each type shall be located with all operable parts within 40" of the floor. Mirrors
shall be mounted with the bottom edge no higher than 40" above the floor.
' Toilet tissue dispensers shall be located on the wall within 12" of the front edge of the toilet seat per
section 3105A(b)4.C.
DRINKING FOUNTAINS:
G)
Where water fountains are provided they shall comply with section 3105A(d)1:
1. 'Water fountains shall be located completely in an alcove or otherwise so positioned so as to not
encroach into pedestrian ways.
2. The alcove in which the water fountain is located shall not be less than 32" in width and 18" in
depth.
3. . See section 1 507 of the California Plumbing Code for additional requirements.
NOTE: See Figure 31-3 of Title 24 for specific dimension requirements.
TELEPHONES:
A. Where public telephones, or public pay phones, are provided they shall comply with the requirements of
section 3105A(d)2:
A clear space at least .30" x 48" that allows either'a forward or parallel approach by a person
using a wheelchair shall be provided. Clear floor or ground space for wheelchairs may be part of
the knee space required under some objects.
One full unobstructed side of the clear floor or ground space for a wheelchair shall adjoin another
wheelchair clear floor space. If the clear space is located in an alcove, or otherwise confined on
all or part of three sides, additional maneuvering clearances shall be provided. Bases, enclosures
and fixed seat ,s shall not impede approaches to telephones by people who use wheelchairs.
If telephone enclosures are provided, they may overhang the clear floor space required. See
Non-Residential Access Requirements Page 9
Plan Review Correction list April 15, 1994
Figures 31-4 (a). (b). and (C). If enclosures protrude into walls, halls, corridors or aisles, the cord
from the handset shall be at least 29' long.
The highest operable part of the telephone shall be 48' maximum as specified in section
3105A(h)4Cand D and Figures 31-5C and 31-5D. Telephones mounted in a corner that require
wheelchair users to reach diagonally shall have the highest operable past no higher than 54
above the floor.
Telephones shall be equipped with a receiver that generates a magnetic field in the area of the
receiver cap. If banks of. public phones are provided, then at least 25%, but always at least one
per bank, including closed-circuit telephones in a building or facility, shall be equipped with a
volume control capable of producing a minimum of 12 dbA and a maximum of 18 dbA above
normal.
Public telephones with volume control shall be hearing aid compatible and shall be identified by
a sign containing a depiction of a telephone handset with radiating sound waves.
* If four or more public pay phones are provided and at least one is at an interior location, then at
least one interior public text telephone complying with section 3105A(d)21(ii) and (iii) shall be
provided, per section 3105A(d)21(i). Also, they are required for stadiums, arenas, convention
centers and covered malls.
Text telephones shall be identified by the international .TDD symbol (See Figure 31-14).
Directional signage is required to be provided, adjacent to all banks that do not contain a text
telephone, indicating the location of the nearest text telephone. If a facility has no banks, the
signage shall be provided at the building entrance or building directory.
NOTE: See Figures 31-4 (a), (b), (C) and 31-5A, C and D for required specific dimensions.
DA/NR/G
Date: -5/,51 9A juisdictioh:____________
0 Bldg. Dept.
Pread by: Cl Esgil
VALUATION. AND PLAN CHECK FEE
PLAN CHECK NO.-.
BUILDING ADDRESS Lok
APPLICANT/CONTACTc\& rlePHONE NO.
BUILDING OCCUPANCY DESIGNER PHONE______________
TYPE OF CONSTRUCTION CONTR.CTOR PHONE_______________
BUILDING PORTION BUILDING AREA VALUATION
E\L MULTIPLIER
•
-lding Pm Fee $
Plan. Check Fee
CONNENTS:
/
93
c:\geera1\ve1t..ht SHEET OF \ 3/94
PLANNING/ENGINEERING APPROVALS
PERMIT NUMBER CB,f+' DATE
ADDRESS 3 L Ke- 9JP
RESIDENTIAL
RESIDENTIAL ADDITION MINOR PLAZA CAMINO REAL
(<$10,000.00)
VILLAGE FAIRE
COMPLETE OFFICE BUILDING
OTHER
,j A)O 7.101t
PLANNER DATE
ENGINEER DATE
C:\WP5 1 \FILES\BLDG.FRM
PLANNING CHECKLIST
Plan Check No. 4 Address Z-7 36 (-Ok62 A (/8 W.
Planner VAN LYNCH Phone 438-1161 ext. 4325
I (Name)
APN:
Type of Project and Use 72o 7Z
Zone PlY) Facilities Management Zone '
CFD (iij) #
tcW (If property in, complete SPECIAL TAX CALCULATION
WORKSHEET provided by Building Department.)
> Legend
EE 1
Item Complete
! ! (J) [tern Incomplete - Needs your action
1, 2, 3 Number in circle indicates plancheck number where deficiency was
identified .•
(21'] 0 Environmental Review Required: YES NO. TYPE._______
DATE OF COMPLETION:
- Compliance with conditions of approval? If not, state conditions which require action.
Conditions of Approval
0 Discretionary Action Required: YES - NOS_ TYPE
. APPROVAL/RESO. NO. DATE:
PROJECT NO.
OTHER RELATED CASES:
Compliance with conditions of.approval? If not, state conditions which require action.
Conditions of Approval .
0 0 California Coastal Commission Permit Required: YES - NO 2<
DATE OF APPROVAL:
San Diego Coast District, 3111 Camino Del Rio North, Suite 200, San Diego, CA. 92108-1725
(619) 521-8036
Compliance with conditions of approval? If not, state conditions which require action.
Conditions of Approval
V0 Inc1usion.ary Housing Fee required: YES NO ,(
(Effective date of Inclusionary Housing Ordinance - May 21, 1993.)
Site Plan:
0 1. Provide .a fully dimensioned\site plan drawno scale. Show: North
arrow, property lines, easements, existing and proposed structures,'
streets, existing street improvements, right-of-way width, dimensioned
setbacks and existing to'pographical lines.
(3't6 0 2. Provide legal description of property, and assessor's parcel number.
Zoning:
/A6 1. Setbacks:
C9 Front: Shown
/V
Required
IWOIL Int. Side: Required Shown
Street Side: Required Shown
Rear: Required Shown
0 MIA"2. Lot coverage: Required Shown
QJ'6EJ t/4_ 3.' Height: Required
0
Shown
t"63
Shown 4. Parking: Spaces Required
Guest Spaces Required Shown
0 0 0 Additional Comments
OK TO ISSUE AND ENTERED APPROVAL INTO COMPUTER ) 4") C-' DATE
I
PLNCK.FRM
L
City of Carlsbad 94112
Fire Department Bureau of Prevention
Plan Review: Requirements Category: Building Plan Check
Date of Report:Tuesday, May 17, 1994 Reviewed by:
Contact Name Virginia Satterlee
Address 2734 Loker Av W #M
City, State Carlsbad CA 92008
ibtNo. 94-484 Planning No.
Job Name Interior Specialists
Job Address 2736 Loker Ste. or Bldg. No. D
/Vb kO7 4E Oi.- pAiaKlAi6 ,&)
Approved - The item you have submitted for review has been approved. The approval is
based on plans; information and/or specifications provided in your submittal;
therefore any changes to these items after this date, including field modifica-
tions, must be reviewed by this office to insure continued conformance with
applicable codes. Please review carefully all comments attached, as failure
to comply with instructions in this report can result in suspension of permit to
construct or install improvements.
D Disapproved - Please see the attached report of deficiencies. Please make corrections to
plans or specifications necessary to indicate compliance with applicable
codes and standards. Submit corrected plans and/or.specifications to this
office for review.
For Fire Department Use Only
Review 1st 2nd 3rd
Other Agency ID
CFDJob# 94112 File#_________
2560 Orion Way 0 Carlsbad, California 92008 • (619) 931-2121