Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2600 GAGE DR; ; FPR2017-0204; Permit
tCityof PERMIT REPORT Carlsbad Print Date: 05/27/2021 Permit No: FPR2017-0204 Job Address: 2600 GAGE DR, CARLSBAD, CA 92010-5608 Status: Closed - Finaled Permit Type: FIRE-Construction Residential Work Class: Multifamily Fire Alarm Parcel #: Track #: Applied: 05/11/2017 Valuation: $0.00 Lot #: Issued: 05/31/2017 Occupancy Group: Project #: DEV11017 Finaled Close Out: 05/13/2021 #of Dwelling Units: Plan #: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check #: Inspector: Plan Check U: Final Inspection: Project Title: ROBERTSON RANCH WEST VILLAGE Description: ROBERTSON RANCH PORTOLA SENIOR APARTMENTS -FIRE ALARM Applicant: FPContractor: HO SYSTEMS INC HCI SYSTEMS INC JEFF RODGERS S 4585 MURPHY CANYON RD 4585 MURPHY CANYON RD SAN DIEGO, CA 92123-4318 SAN DIEGO, CA 92123-4318 (909) 628-7773 (858) 560-7000 FEE AMOUNT FIRE New Alarm System $1,227.00 Total Fees: $1,227.00 Total Payments To Date: $1,227.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 1 760-602-8561 f I www.carlsbadca.gov HCI Systems Inc FIRE / LIFE SAFETY & LOW VOLTAGE SPECIALISTS California Contractor's License # 905493 Fire Alarm System Complete Material Submittal Prepared for: Portola Senior Apartments - R.R. 2600 Gage Drive, Carlsbad, CA 92010 FPR20I7-0204 2600 Gage DR * PnDG&A Ontario • San Diego • Irvine • Northern California Corporate Office: 1354 South Parkside Place, Ontario, CA 91761 Phone: (858) 560-7000 FAX: (858) 560-7007 24-Hour Service: (909) 628-8886 Website: www.hcisystems.net Portola Senior Apartments - R.R. 2600 Gage Drive, Carlsbad, CA 92010 Manufacturer Device Model # Description C.S.F.M. # BOSCH FPD-7024 Fire Alarm Control Panel 7165-1615:0227 Include With: BOSCH B440 Conettix Plug-in Cellular Communicator 7165-1615:0227 BOSCH B450 Conettix Plug-in Communicator Interface 7165-1615:0227 BOSCH D7039 Multiplex Expansion Module 7165-1615:0227 INTERSTATE SLA.0156 17 Amp Battery U.L. Listed FIRELITE FCPS-24F56 6 Amp Booster Power Supply 7315-0075:0206 INTERSTATE SLA-1079 8 Amp Battery U.L. Listed BOSCH D7050 Intelligent Photoelectric Smoke Detector 7272-1615:0175 BOSCH 137050-116 Standard Detector Base 7300-1615:0176 BOSCH D255 Fixed Temperature Heat Detector 7270-1653:0167 BOSCH D250A Fixed Temperature Detector Base 7300-1615:0176 BOSCH D7052 Multiplex Dual-Input Module 7165-1615:0227 BOSCH D7053 Control Relay Module 7165-1615:0227 BOSCH D7044 Multiplex Single-Input Mini Module 7165-1615:0227 SYSTEM SENSOR PR-1 Multi-Voltage Control Relay 7300-1653:0172 BOSCH FMM-7045 Single Action Pull Station 7150-1615:0122 SYSTEM SENSOR SYS-HWLF Low Frequency Wall-Mounted Horn 7135-1653:0223 SYSTEM SENSOR SYS-PC2W Ceiling-Mounted Horn-Strobe, White 7125-1653:0186 SYSTEM SENSOR SYS-1`2W Wall-Mounted Horn-Strobe, White 7125-1653:0186 SYSTEM SENSOR SYS-SW Wall-Mounted Strobe, White 7125-1653:0186 0, www.boschsecurity.com 00@2CH Invented for life S Th&FPD-7O24Fire Alarm Control Panels (FACPs) can be used in commercial and public building applications such as schools, universities, manufacturing plants, and health care facilities. They are listed by UL for central station, local, auxiliary, and remote station systems. The FPD-7024 FACP5 support four on-board initiating zones that can be expanded to eight using the FPC-7034. Each initiating zone supports two-wire and four-wire detectors configurable as Class A, Style D or Class B, Style B loops. Each zone can support up to 20 two-wire detectors, or any number of four-wire detectors depending on available power. Each FACP has a built-in digital fire alarm communicator transmitter (DAd). Enhance the FPD-7024 conventional system features by adding a D7039 Multiplex Expansion Module. Adding a D7039 Multiplex Expansion Module to the FPD-7024 turns the conventional FACP into an addressable FACP. The D7039 adds up to 247 addressable points to the base system and adds an additional 400 events to the history buffer for a total of 499 events. The D7039 also increases the number of programmable relay outputs from 19 to 59 and expands system users to 100. Four initiating zones (expandable to eight); up to 20 two-wire smoke detectors per zone Programmable through keypads or remote programming software (RPS) through a Conettix interface module Two notification appliance circuits (NACs) on board with a shared internal regulated 24 VFWR, 4 A NAC power supply o Easily converts to addressable with the addition of a D7039 Multiplex Expansion Module Notification Appliance Circuits (NACs) Two Class A, Style Z or Class B, Style V NACs provide up to 4 A of regulated 24 VFWR power to operate horns, strobes, bells, and other notification appliances. Each NAC can be programmed to provide Temporal Code 3, California March, steady, pulsed, and synchronized output for Wheelock, Gentex, or System Sensor notification appliances. User Interface A viewing port in the locked control panel enclosure door shows the system status light-emitting diodes (LEDs) and liquid-crystal display (LCD) while maintaining system keypad security. Unlocking the enclosure door provides access to the system controls for silencing off-normal conditions, zone bypassing, detector resetting, testing, other fire functions, and programming. These functions are also available on all FMR-7033 LCD Keypads connected to the system. Organized Event Display Sorts alarm, trouble, and supervisory events into categories and allows scrolling through specific events. 2 1 FPD-7024 Fire Alarm Control Panels 1 History Buffer The system stores events in a 99-event history buffer. Notice The number of events that can be stored in the history buffer increases to 499 with the addition of a D7039 Multiplex Expansion Module. Central Station Reporting The FPD-7024 FACPs send reports to two telephone numbers (or, if a Conettix Interface module is installed, IP addresses) to an appropriate Conettix receiver at the central station with full single, double, and backup reporting. The panel supports communication in BFSK, SIA, Contact ID, Modem lIla2, and 4/2 or 3/1 Tone Bursts. Dirty Smoke Detector Monitoring All on-board zones and FPC-7034 zones are continuously monitored for smoke detectors signaling a dirty condition using the Bosch Chamber Check feature and CleanMe protocol. If a detector's smoke chamber is dirty, the detector sends a CleanMe signal on the two-wire loop or a dirty detector signal on the addressable loop. The control panel annunciates that there is a dirty detector on the loop or the address. The Chamber Check feature signals a dirty smoke chamber using the LED on the detector head. Accessories The FPD-7024 enclosure has space for additional accessory modules and two D1218 (18 Ah) batteries or two D126 (7 AN batteries. Region Certification USA UL UOJZ: Control Units, System (ANSI/UL 864) FM FPD-7024 CSFM see our website FCC ESVAL04137024 FDNY- #6173 CoA _I Compatible Products The following products are compatible (refer to the product datasheet for country-specific certifications/ approvals) with the FPD-7024 FACP: Category Product ID and Description Batteries and 012612 V.7 Ah battery Power Supplies D1218 12 V, 18 Ah battery FPP-RNAC-8A-4C Remote NAC power supply Detectors For two-wire detector compatibility, refer to FPD-7024 Smoke Detector CompatibilityList Technogram (P/N: F011.1010790) Keypads and D7030X Eight-point LED annunciator (eight red) Annunciators D7030X-S2 Eight-point LED annunciator (two yellow, six red) D7030X-S8 Eight-point LED annunciator (eight yellow) D7032 Eight-point LED annunciator expander (eight red) FMR-7033 LCD fire system keypad FMR-7036 LCD annunciator Modules 01328 Smoke detector reversing relay module D184A Local energy kit 0185 Reversing polarity module 0275 EOL power supervision module FPC-7034 Four-point expander 07039 Multiplex expansion module Option Bus 07035 Octal relay module Devices D70358 Octal relay module in box DX401OV2 USB/serial interface module 0X4020 Network interface module B420 Ethernet communicator B426 Ethernet communication module B440 Conettix plug-in cellular B441 Conettix plug-in cellular B442 Conettix plug-in GPRS cellular B443 Conettix plug-in HSPA+ cellular B450 Conettix plug-in communicator interface ITS-DX4020-G GPRS/GSM communicator NAC Devices Refer to FPD-7024 Device Compatibility List Technogram(PfN: F01U010791) The following additional products are compatible with the FPD-7024 Addressable FACPs: Category Product ID and Description Detector Heads D7050 Addressable Photoelectric Smoke Detector and Bases Head D7050TH Addressable Photoelectric Smoke and Heat Detector Head 07050-136 Detector Base Modules D7042 Multiplex eight-input remote module F3 I FPD-7024 Fire Alarm Control Panels O 07042B Multiplex eight-input remote module in box D7044 Multiplex single-input module 07044M Mini multiplex single-input module D7048 Multiplex octal driver D7048B Multiplex octal driver in box D7052 Multiplex dual-input module D7053 Multiplex input-output module Pull Stations FMM-7045 Single-action manual station FMM-7045-D Double-action manual station Parts included iA Quant Component 1 FPD-7024 board in a static-resistant bag 1 Enclosure 1 Lock set with two #1358 (D102) keys (PI N: F01U083084) 1 Transformer (PIN: F01U033706) 6 2.21 kOend-of-line (EOL) resistors (P/N: F01U034504) 1 Hardware pack 1 Literature pack Notice For the FPD-7024 to be addressable, a D7039 Multiplex Expansion Module must be installed The D7039 is purchased separately. FPD-7024"LC Quant. Component 1 FPD-7024 board in a static-resistant bag 1 Hardware pack 1 Literature pack FPD-7024-LT (Latin America only) Quant. Component 1 FPD-7024 board in a static-resistant bag 1 Enclosure 1 Lock set with two #1358 ID 102) keys (PI N: F01U083084) 6 2.21 kfl end-of-line (EOL) resistors (P/N: f01U034504) 1 Hardware pack 1 Literature pack FPC•7024FK1 Quant Component 1 FPD-7024FACP 1 F220-B6E 6-in. (15.24-cm) diameter, 4-wire base with EOL relay 1 F220-P photoelectric spot smoke detector 1 SS-P2R Two-wire Horn Strobe 1 FMM-100SATK manual station (red) 2 D162@24 2-ft (60.96-cm) dual modular phone cord 2 D166@24 RJ31X phone jack echnical specifications Electrical (Cnt() C3 FO Current(iindb l200iA' Power (primary): 120 VAC, 1.2 A maximum, 60 Hz or 240 VAC .0.75 A maximum, 50 Hz * For product-specific current values, see the product's Installation Instructions. Environmental Environment: Indoor, dry Relative Humidity: Up to 95%, non-condensing Temperature (operating): +32°F ((°C) to +120°F (+49°C) Mechanical Properties Color: Red Dimensions (HxWxD): 20.8 in. x 15 in. x 4.3 in. (52.8 cm 38.1 cm 10.9cm) Material: Cold-rolled steel Base: 18 gauge (1.2 mm) Cover: 19 gauge (1.1 mm) Indicating Device Circuits (lDC) Current: 44 mA maximum per loop Line resistance: 1500 Voltage: 24 VDC nominal Outputs NAC: 24 VDC nominal, 4 A maximum On-board Relays: Three Form C contacts rated at 5 A, 28 VDC Off-board Relays: Up to two 07035 Octal Relay Modules with each providing eight Form C relay outputs; contacts rated at 5 A, 28 VDC In an addressable system, up to 20 07053 Multiplex Input-Output Modules are allowed per bus for a total of 40 Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. FPD-7024 FACP Four detector zones (expandable to eight); up to 20 two wire smoke detectors per zone Order number FPD.7024 FPD-7024-LC FACP without Enclosure and Transformer Four detector zones (expandable to eight); up to 20 two wire smoke detectors per zone Order number FPD-7024-LC FPD-7024-LT FACP without Transformer Four detector zones (expandable to eight); up to 20 two wire smoke detectors per zone. Available only in Latin America. Order number FPD-7024-LT Accessories FPC-7024-FKI Basic Fire Panel Kit Four-zone FACP with one four-wire photoelectric smoke detector and base with EOL relay, one two-wire horn/strobe, one manual station, and two RJ31X phone jacks with dual modular phone cords. Order number FPC-7024•FK1 D102 Replacement Key Replacement key (#1358) for the D101 lock. Order number D102 Represented by: Anerku, Europe, Middle Ent, AMex, AxIs-PacIfic, China: America Latina Bosch Security SyStemS, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pie Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Lids Security Systems Division 130 Pennton Parkway P.O. Box 80002 Systems 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98 Fairport, New York, 14450. USA 5617 BA Eindhoven, The Netherlands 11 Biohan Street 21 North iBP CE? 13065-9OO Phone, -1800 289 0096 Phone, • 3140 2577 284 Singapore 573943 Charrgnieg District, Shanghai Cumpinou, Boo Paulo, Brazil Fax, +1 565 223 9180 Fax, -3140 2577 330 Phone, *65 6571 2808 200335 China Phone, *55 19 2103 2860 aecuflty.sxies5us.boxch.com emex.securitysyxtems5boxch.com Fan, .85 6571 2699 Phone +86 21 22181111 Fax, *55 192103 2662 www.bosclrxecurity.us www.boschsecurity.com xpr.securiiysystems@bosch.com Fax, +86 21 22182398 iatam.boschsecuritybouch.com www.boschuecurlty.asia www.boschnecurity.com.cn www.bosdnsecurity.com O Bosch Security Systems 2014 I Data subject to change without notice 2692228235 (en, Vi?, 18. Due 2014 Catlout - Description 7 - Remote PC's network connection 8 - Remote PC running RPS 9—Personal SMS notification 10 - Ethernet connection 11 - Central montoring station www.boschsecurity.com 0 BOSCH Invented for life Secure Conettix IP communication from compatible Bosch panels to Bosch receivers P. Remote programming and monitoring of compatible Bosch panels o. Personal SMS message and e-mail notification options Configured directly from Bosch Remote Programming Software (RPS) eliminating the need for separate configuration P. Simple LED status information and advanced keypad diagnostics available TheB44O enables 3G EVDO and CDMAsecure two way IP communication over the Verizon cellular networks. Typical applications are: Alarm reporting to a central station Remote panel programming through Remote Programming Software Remote monitoring and control through a mobile application Personal notification using SMS The B440 is built for a wide variety of secure commercial and industrial applications. Flexible end- to-end path supervision, 128-bit to 256-bit AES encryption and anti-substitution features make B440 desirable for high security and fire monitoring applications. Developed for the military, CDMA technology offers long service life with resistance to hacking and jamming. The B440's dual technology radio will use high speed 3G EVDO when available or switch to CDMA if required. Note: Cellular capability requires an appropriate data plan from Bosch. System overview BOSCH 2 Callout - Description 1 - B440 Conettix Plug-in Cellular Communicator 2 - Compatible control panel 3 - Antenna cable 4 - Magnetic base antenna 5 - Base station on wireless carrier's network 6 - IP network cloud J1i!4(D]L. Conettix IP communication via Cellular Mounting Considerations In addition to the security provided by the network The B440 plugs into any B Series control panel, operator, the B440 uses our Conettix IP protocol that available in a variety of enclosures. supports: Wiring Considerations Flexible polling intervals The B440 connects to the B Series control panel Resistance to Denial of Service attacks without tools or physical wiring for power. It has a 128-bit to 256-bit AES encryption with Cypher Block screw on SMA antenna connection. Chaining Cellular Service Considerations Anti-replay/anti-substitution keys The B440 is shipped pre-activated for Bosch Cellular Easy Installation, troubleshooting, and maintenance service on the Verizon cellular network. A valid service No networking expertise required at field site (no contract is required prior to ordering. firewall or router settings) No PC or special tools required for installation and Parts included troubleshooting Manage service plans and settings through RPS Quantity Component Diagnostic LEDs for on-site troubleshooting 1 8440 Conettix Plug-in Cellular LED Function Communicator Blue (heartbeat) System status Indicator 1 Antenna Red Unacceptable signal strength 1 Literature pack Yellow Marginal signal strength Technical specifications 1 Green Good signal strength Electrical 2 Green Very good signal strength Current Standby: 35 mA Remote programming of Bosch control panels (operating) Alarm: 150 mA The B440 supports secure RPS programming of Voltage (operating) 12 VDC nominal compatible Bosch control panels. Personal notification and control Radio Verizon CDMA dual band radio 850 MHz and 1900 MHz The B440 supports the Bosch Remote Security Control mobile application and can be configured for SMS Environmental personal notification reports to mobile phones or e- mail addresses. Environment Environmental Class Ill - Indoor _________________________________ Tiiia. .• (.1'i-i I- Certifications_________approvals Relative humidity 5-93% at +32°C (+90°F) non-condensing Operating -10°C to +55°C (+14°F to +131°F) Agency temperature FCC FCC, Part 15 Class B Radiated/Conducted Emissions Mechanical Verizon Open Development Certified Board dimensions 2 in x 3.68 in x 0.60 in (50 min x 93.5 mm x 15.25 mm) UL UL 365- Police Station Connected Burglar Alarm Units and Systems Antenna(included) • Magnetic base omni-directional 8.2 ft (2.5 m) cable with SMA connector UL 636- Holdup Alarm Units and Systems Compatibilities UL 985- Household Fire Warning System Units Control panels B5512 control panel UL 1023- Household Burglar-Alarm System Units B4512 control panel UL 1076- Proprietary Burglar Alarm Units and Systems 83512 control panel UL 1610- Central-Station Burglar-Alarm Units Cellular EVDO rev A CDMA2000 1xR1T Region Certification USA CSFM 7167-1615:02477167-CONTROL UNIT (HOUSEHOLD) 3 I B440 Conettix Plug-in Cellular Communicator il7FfllT[.rlti!l(D1i S B440 Conettix Plug-in Cellular Communicator Dual technology 3G EVDO/CDMA cellular communicator for secure two-way IP communication on the Verizon Wireless network. Order number B440 Represented by: Americam Europe. Middle East, Africa: Aala.Paclflc: China, America Latins: Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pie Ltd. Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division 130 Perinton Parkway P.O. Box 80002 Systems 201 BuildIng, No. 333 Fsquas Rood Vi. Anhanguers, Km 98 Fairport. New York, 14450. USA 5617 BA Elndhoaen, The Netherlands 11 Blshan Street 21 North IBP CEP 13065900 Phone: 41600 289 0096 . Phone: + 3140 2577 284 Singapore 573943 changnlng District. Shanghai Cainpleas, San Paulo. Brazil Fax: +1585 223 9180 Fox +3140 2577 330 Phone: 465 6571 2808 200335 China Phone: 455 19 2103 2860 aecurIty.oaleo@as.bosch.com emea.securitysystemo@bosch.com Fax: +65 6571 2699 Phone 48621 22181111 Fax: 455 19 2103 2862 www.boschsecurlty.us www.boschsecurity.com apr.secaritysyntemsigbosch.com Fax: +86 21 22182398 lalom.bosehsecurlty@bouch.com www.bcschnncurity.asia www.boschsecarlty.com.cs www.boschsecurity.com O Bosch Security Systems 2013 I Data subject to change without notice 7682076555 1en, V5, 26. Nov 2013 r B450 system overview Callout- Description 1- Compatible Bosch control panel 2 -Panel data bus (SD12, SDI, or Option) Callout- Description 6- Cellular carrier network 7-Internet/LAN/WAN Intrusion Alarm Systems I B450 Conettix Plug-in Communicator Interface B450 Conettix Plug-in Communicator [IJ Interface 1!! 1 :I•Jf4 : I ,1TI1.lTiITlt1(: Enables full two-way IP communication using Plug-in Cellular Communicators P. Plug and Play installation makes future radio technology changes easy P. Compatible with new and most deployed Bosch control panels Supports remote installation of cellular modules for improved signal The13456Conettix Plug-in Communicator Interface is a four-wire powered S012, SDI, or option bus device that provides two-way communication with compatible control panels over commercial cellular networks using a plug-In communicator (available separately). Use B450 in combination with a plug-in communicator for primary or backup alarm communication, remote panel programming and other remote applications. The B450 supports Conettix IP protocol with full authentication, 256 bit AES encryption and resistance to Denial of Service attacks. It is a reliable way to add cellular network communications to existing or new commercial security and fire installations. 3- B450 Plug-in Communicator 8- Remote Programming Interface Workstation 0 2 I B450 Conettix Plug-in Communicator Interface I S USB connection for B450 9-Bosch Conettix IP receiver configuration (D6600, D6100i, or D6100IPv6) B44x Plug-in Cellular Communicator (available separately) Conettix IP communication The B450 uses Conettix IP protocol which supports: Full event code reporting and administration Flexible supervision intervals Resistance to Denial of Service attacks 128, 192 or 256-bit AES encryption Anti-replay and anti-substitution Switch addressing Use the address switch to easily assign a bus address or setup for USB or SMS configuration where required. Easy configuration For most installations, the default B450 settings allow Installation with no device programming required. An address switch allows easy bus address selection. For customized network settings, the B450 supports a USB configuration menu, or configuration via SMS. B Series and GV4 Series control panels support limited keypad and RIPS programming of B450 settings. LEDs Three LEDs provide status and troubleshooting information about the module and its connection. LED Description Heartbeat Indicates the system status of the B450 and its connection to the panel. RX Indicates when an inbound packet is received on the bus. TX Indicates when an outbound packet is transmitted on the bus. Region US NISTFIPS 197 FCC Part 15 Class B UL 365 UL 636 UL 864 UL985 UL 1023 UL 1076 UL 1610 Canada CAN/ULC S303 CAN/ULC S304 ULCS545 ULC-ORD C1023 ULC-ORD C1076 ICES-003 - Digital Apparatus Rogers - Certified North PTCRB - Certified America Europe CE- EN50130-4, EN610006-3, EN60950 lflbtdildLillIFI/LlJtltlf lrd tion Mounting considerations Find a location with acceptable signal strength on your wireless network. Mount the B450 Conettix Plug-in Communicator Interface into the interior of a compatible enclosure via the 3-hole mounting pattern using the supplied mounting screws. Wiring considerations The B450 connects to a control panel using a data bus connection via the module's terminal strip, or the module's interconnect wiring connectors. For data bus powered installations outside the compatible control panel enclosure, follow the maximum wiring distances in the technical specifications. For further installations power from a compatible auxiliary power supply. Parts Tyr,rr Quantity Component 1 B450 Conettix Plug-in Communicator Interface 1 Hardware pack 1 Interconnect cable wiring 1 Quick Start Guide (hardcopy) 1 Technical specifications Literature (mini-CD) Electrical (Current ((operating)) (iiiby_B450 wthB440/i4'4TfB442/B44 60 mAl arm: B450 with B440/B441/B442j§_=443 (180 mA Voltage (operating) (B450 bus operation): 12 VDC nominal Environmental Relative humidity Up to 93% at +32°C (+90°F) non-condensing Operating 0°C to +50°C (+32°Fto+1220F) temperature Mechanical Installed Bus Board dimensions 79 mm x 128 mm x 38 mm (3.11 in x 5.03 in x Configure N V GV4/B Series 1.50 in) B450 from v203+, AMAX control panel vX.X, Solution Wiring (RPS, A-link) vX.X Data bus wire 12 AWG to22AWG Personal N V Requires gauge Notification compatible via SMS or control panel USB cable USB cable (Type Ato A male-to-male) — not Email and cellular supplied plan Data bus wire Maximum Distance Remote N r Requires length — wiresize: Security Bosch Cellular 22 AWG (0.65 mm) —> 12 m (40 ft) Control App service or 18 AWG (1.0 mm) —>30 m (100 It) other cellular 16 AWG (1.3 mm) -> 48 m (158 ft) network 12 AWG (2.0 mm) -->122m(400ft) access Using a separate powersupply, such as the Orderi ng information B520 Auxiliary Power Supply Module, connected to the B450 within the specification listed above, the wire distance can be extended B450 Conettix Plug-in Communicator Interface upto300m(l000ft) Supports two-way IP communication over using a plug- in Cellular Communicator for compatible SD12, SDI or Compatibilities option bus control panels. Control panels B5512/134512/133512 (B5512E/B45 12E/ Order number B450 B3512E with firmware v2.03 and higher) Accessories D9412GV4/D7412GV4/D7212GV4 (vL000xxs) D9412GV3/D74126V3/07212GV3 B440 Conettix Plug-in Cellular Communicator D9412GV2/D7412GV2/7212GV2 (v706+) Dual technology 3G EVDO/CDMA cellular FPD-7024 communicator for secure two-way IP communication AMAX 2000/2100/3000/4000 on the Verizon Wireless network. CMS 6/8/50 Order number B440 Solution 2000/3000 8441 Conettix Plug-in Cellular Communicator Cellular B440 Conettix Plug-in Communicator, Cellular (3G) Multi-function CDMA cellular communicator for secure communicators B441 Conettix Plug-In CDMA Cellular Communicator two-way IP communication on the Verizon Wireless B442 Conettix Plug-in GPRS Cellular Communicator network. B443 Conettix Plug-in HSPA+ Cellular Order number B441 Communicator Enclosures 810 811 D8103 D203 Applications Tera Term (for USB B450 configuration) Hyper Terminal (for USB B450 configuration) RPS version 5.16 or higher Installed Bus Function Option/SDI SD12 Details IP Event V V TCP protocols Reporting only supported on Repr.sent.d by: SD12 Açerlcaaj Eit,yepe. Middle Eant, Africa;Aaa-P.c)ftc: China: America Latina, B1eoeity Systems. Inc. B8sd Security Systems B.V. R55qt.M (SEA) Pie Ltd. Security Botch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division P.O. Box 80002 (ele , aa lular 201 Building. No. 333 Fuquori North ISP CEP 13085-900 Road Vii Anhsnguera, Km 98 Sho 14450, USA 5617 BA Eindhoven, The Netherlands If POI'na'llfl)Op 289 0096 Phone: + 3140 2577 284 S6Ci8Oe1943 Changnlng District, Shanghai Campinas, San Paulo. Brazil Fax: .1565 223 9180 Fax: *3140 2577 330 PWc5M,808 200335 China Phone: +55 19 2103 2860 security.saIes@us.bosch.com emeo.securitysystemn@bosch.com F489 57'f999 Phone +86 21 22181111 Fax: +55 19 2103 2862 www.boschsecurlty.us www.boschsecurity.com a%)tWr4ystemsbosch.xm Fax: .86 21 22182398 latam.bnschsecurity@boxch.com www.boschsecurlty.com.cn mwm.boschuncurlty.com O Bosch Security Systems 2014 ( Data subject to change wIthout notice 110361862511 en, VS. 03. Mar 2014 www.boschsecurity.com 0 BOSCH Invented for life Has two Class B (Style 4) multiplex buses (supports addresses 9 to 255) 0. Provides one Class A (Style 6) multiplex bus (supports addresses 9 to 128) Expands number of user codes to 100 PINs Increases event history buffer to 499 events P. Compatible with RPS The D7039 Multiplex Expansion Module is designed to enhance the conventional features of the 07024 or FPD-7024 Fire Alarm Control Panel (FACP). The module connects directly to the FACP and results in a total of up to 255 addressable points. The module also increases the number of relay outputs (to 58 on the D7024 control panels and 59 on FPD-7024 control panels). It adds an additional 400 events to the history buffer for a total of 499 non-volatile events. It also allows for up to 100 system users (an addition of 84 PINs from the base system). The module can be programmed remotely from a PC using the RPS Remote Programming Software. Notice The D7024 is not listed under UL864, 9th edition. Region Certification . USA UL UOJZ: Control Units, System (ANSI/UL 864) FM 07039 Region Certification CSFM see our website FDNY- #6173 CoA Compatible Products The following products are compatible with the D7039 Multiplex Expansion Module: Category Product ID Product Description Control D7024 Addressable and conventional FACP Panels D7024-EXP Addressable and conventional FACP for export FPD-7024 Addressable and Conventional FACP Mounting Considerations The D7039 mounts onto the control panel board inside of the control panel's enclosure using connector pins. The D7039 Input-Output board mounts to the inside wall of the enclosure for field wiring. 2 I D7039 Multiplex Expansion Module Wiring Considerations Refer to control panel's installation guide for additional wiring requirements. Maximum Impedance: 50 flat +20°C (+68°F) nominal Distance (approximate) Size 1170 m ISO 0.75 mm' 1810 m ISO 1.5 mm' 3800ft 18AWG 5950 ft 16AWG JjJ Notice Do not use shielded cable. Twisted pair is acceptable but not recommended. Notice If used in fire applications, a minimum of 18 AWG (ISO 0.75 mm') is required. Quant. Component 1 D7039 board 1 D7039 Input-Output board of 3 Standoffs for input-output board 4 Standoffs for D7039 board 1 Literature pack Environmental Considerations Environment: Indoor, dry Power Requirements Current (load): 100 mA maximum each bus Current (alarm and standby): 150 mA maximum Resistance (bus wiring): 500 maximum Voltage (bus): 12 VDC nominal Voltage (input) 24 VDC nominal D7039 Multiplex Expansion Module The 07039 enhances the conventional features of the D7024 or FPD-7024 FACPs by increasing the number of addressable points to 256, the number of relay outputs to 58 on the D7024 or 59 on FPD-7024, the number of events on the history buffer to 499, and the number of users to 100. Order number D7039 I D7039 Multiplex Expansion Module Represented byi Americas Bosch Security Systems. Inc. 130 Perlston Parkway Fairport. New York. 14450. USA Phone: 41600 289 0096 . Foe: 41585223 9180 oecurity.saten(Pus.bosth.com www.boxchnecurily.us Europe, Middle East, Africa; Booth Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: 3140 2577 284 Fix: +3140 2577 330 emea.securitysyotems@basch.com www.boschsecurity.com AalaPaclflc, Robert Bosch (SEA) Pte Ltd, Security Systems 11 Blshan Street 21 Singapore 573943 Phone: +85 6571 2808 Fax: *65 6571 2699 apr.00curityuyntemo@bosch.com w.boschseeurlty.asla China, Bosch (Shanghai) Security Systems Ltd. 201 BuIlding, No. 333 Fuquan Road North IBP Changnlng District. Shanghai 200335 China Phone +86 21. 22181111 Fax: +8623 22182398 www.baschsocurlty.com.cn America Latloat Robert Bosch Ltda Security Systems Division Via Anhanguera, Km 98 CEP 13065900 Campinas, Sun Paulo. Brazil Phone: .55 19 2103 2860 Fax: .55 19 2103 2862 Iatam.boschsecariLy@boach.com www.boschsecurity.com Bosch Security Systems 2014 I Data subject to change without notice 2691598555 1 on. V5. 22. Jul 2014 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL M-S~ FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7165-1615:0227 Page 1 of I CATEGORY: 7165 - FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE: BOSCH SECURITY SYSTEMSI30 Perinton Parkway, Fairport, NY 14450 Contact Jon Wolski (585) 678-3323 Fax (585) 678-3263 Email: jon.wolski@us.bosch.com DESIGN: Model FPD-7024 fire alarm control unit. Power limited, local, automatic, manual, coded, noncoded, remote station (PPU), proprietary (PPU), central station (PPU), waterfiow and sprinkler supervisory service. Refer to the listee's data sheet for additional components description. System components: FPD-7024; Control Unit FPC-7034; 4-Zone Expander FMR-7033, FMR-7036; Keypad D7035, D703513; Expanded Relay Module D185; Reverse Polarity Module D7039; MUX Expander D7042, D7042B, D7044, D7044M, D7052, D7053; Mulitplez Expander Module D7048, 0704813; Octal Driver Module B440, 13441, *13443; Cellular Modules B450; Interface Module RATING: 120 VAC primary; 24 VDC Secondary INSTALLATION: In accordance with the listee's printed installation instructions, NFPA 72, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Ustee's name, model number, electrical rating and UL label. APPROVAL: Listed as a fire alarm control unit for use with separately listed compatible initiating and indicating devices. Refer to listee's Installation Instruction Manual for details. This control unit can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. This control unit meets the requirements of UL Standard 864, 9th Edition. NOTE: For Fire Alarm Verification Feature (delay of fire alarm signal), the maximum Retard/Reset/Restart period shall not exceed 30 seconds. 'Revsion 09-20-16 dc This listing Is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or Installation criteria. Refer to listee's data sheet, Installation instructions and/or other Date Issued: July 01, 2016 Listing Expires June 30, 2017 is Authorized By: DAVID CAST1LLO, Program Coordinator Fire Engineering Division C go DF-52301 :A2 • D-025 FCPS-24FS6 24 Volt, 6 Amp Power Supply (a FIreLuTeALarms by Honeywell The Fire-Lite FCPS-24FS6(CiE) is a compact, cost-effec- tive, 6-amp remote power supplies with battery charger. The FCPS-24FS6(C/E) may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may stand-alone. Primary appli- cations include notification appliance (bell) circuit (NAC) expansion (to support ADA requirements and NAC synchroni- zation) or auxiliary power to support 24 volt system accesso- ries. The FCPS provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either two Class B (Style Y) and Class A (Style Z, with ZNAC-4 option module) or four class B only. Alternately, the four outputs may be configured as any combination of resettable/non-resettable power outputs (optimal for powering four-wire smoke detec- tors. The FFCPS-24FS6(CIE) also contains a battery charger capable of charging up to 7.0 Amp hour batteries. FCPS- 24FS6(CIE) is ULC-listed. NOTE: Unless otherwise specified, the term FCPS-24FS6 used in this document refers to the standard FCPS-24FS6, FCPS- 24FS6C, FCPS-24FS6E Features UL-Listed Notification Appliance Circuit (NAC) synchroniza- tion using System Sensor, Wheelock, or Gentex "Com- mander2" appliances. s Operates as a "sync-follower" or as a "sync-generator" (default). See note on page 2. Contains two fully-isolated input/control circuits - triggered from FACP NAC (NAC expander mode) or jumped perma- nently "ON" (stand-alone mode). Two Class B (Style V) or Class A (Style Z, with ZNAC-4 module) NACs (circuits 1 & 3) 6-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864). 4-amp continuous output in stand-alone mode (UL 1481). Compatible with coded inputs; signals passed through. Optional power-supervision relay (EOLR-1). In stand-alone mode, output power circuits may be config- ured as: resettabie, (reset line from FACP required), non-resettable, or a mix of two and two. Fully regulated and filtered power output - optimal for pow- ering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power. Power-limiting technology meets UL power-limiting require- ments. Form-C normally-closed trouble relay. Fully supervised power supply, battery, and NACs. Selectable earth fault detection. AC trouble report selectable for immediate 2-hour delay. Works with virtually any UL 864 fire alarm control which uti- lizes an industry-standard reverse-polarity notification cir- cuit (Including unfiltered and unregulated bell power). . Requires input trigger voltage of 9 - 32 VDC. Self-contained in compact, locking cabinet - 15"H x 14.5°W x 2.75'D (cm: 38.1 H x 36.83W x 6.985D). Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batter- ies. Battery charger may be disabled via DIP switch for applica- tions requiring larger batteries. Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2) wire. Specifications Primary (AC) Power: FCPS-24FS6: 120 VAC, 60 Hz, 3.2A maximum. FCPS-24FS6/E: 240 VAC, 50 Hz, 1.6A maximum. Wire Size: minimum #14 AWG (2.0mm2) with 600 V insula- tion. Control input Circuit: Trigger Input Voltage: 9 to 32 VDC. Trigger Current: 2.0 mA (16-32 V); Per Input: 1.0 mA (9 - 16V). Trouble Contact Rating: 5 A at 24 VDC. Auxiliary Power Output: Specific application power 500 mA maximum. Output Circuits: +24 VDC filtered, regulated. 3.0 A maximum for any one circuit. Total continuous current for all outputs (stand-alone mode): - FCPS-24F: 4.0 A maximum. Total short-term current for all outputs (NAC expander mode): - FCPS-24F: 6.0 A maximum. DF-52301:A2.5/17/13--.Page 1014 Secondary Power (Battery) Charging Circuit: Supports lead-acid batteries only. Float-charge voltage: 27.6 VDC. Maximum current charge: 250 mA. Maximum battery capacity: 7.0 AH. Applications Example 1: Expand notification appliance power an additional 6.0 A. Use up to four Class B (Style V) outputs or four Class A (Style Z) outputs (using ZNAC-4). For example, the FACP noti- fication appliance circuits will activate the FCPS when reverse- polarity activation occurs. Trouble conditions on the FCPS are sensed by the FACP through the notification appliance circuit. Example 2: Use the FCPS to expand auxiliary regulated 24- volt system power up to 4.0 A. Both resettable and non-reset- table power options are available. Resettable outputs are cre- ated by connecting the resettable output from the FACP to one or both of the FCPS inputs. Example 3: Use addressable control modules to activate the FCPS instead of activating it through the FACP notification appliance circuits. This typically allows for mounting the FCPS at greater distances" away from the FACP while expanding system architecture in various applications. For example, an addressable control module is used to acti- vate the FCPS, and an addressable monitor module is used to sense FCPS trouble conditions. Local auxiliary power output from the FCPS provides power to the addressable control module. "NOTE: Addressable FACPs are capable of locating control and monitor modules at distances of up to 10,000 feet (3,046 meters). Sync Follower/Generator Note In some installations, it is necessary to synchronize the flash timing of all strobes in the system for ADA compliance. Strobes accomplish this by monitoring very short timing pulses on the NAC power which are created by the FACP. When Installed at the end of a NAC wire run, the FCPS-24FS6 can track (i.e. "follow") the strobe synchronization timing pulses on the existing NAC wire run. This maintains the overall system flash timing of the additional strobes attaches to the FCPS. When the FCPS-24FS6 is configured (via DIP switch settings) as a "sync follower:' the FCPS's NAC outputs track the strobe synchronization pulses present at the FCPS's sync input ter- minal. The pulses originate from an upstream FACP or other power supply. When the FCPS-24FS6 is configured (via DIP switch settings) as a "sync generator," the FCPS's sync input terminals are not used. Rather, the FCPS is the originator of the strobe synchro- nization pulses on the FCPS's NAC outputs. In "sync genera- toe' mode, the sync type (System Sensor, Wheelock, or Gentex) is selectable via DIP switch settings. Standards and Codes The FCPS-24FS6 complies with the following standards: NFPA 72 National Fire Alarm Code. UL 864 Standard for Control Units for Fire Alarm Systems (NAG expander mode). UL 1481 Power Supplies for Fire Alarm Systems. Page 2 of 4— DF-52301:A2 • 5117/13 Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be In process. Consult factory for latest listing status. UL Listed: S2424, S1287 ULC Listed: S2424 CSFM Approved: 7315-0076:176 MEA: 387-94E Ordering Information FCPS-24FS6: 6.0 A, 120 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15"H x 14.5"W x 2.75"D (cm: 38.1 H x 36.83W x 6.9850]), and installation instructions. FCPS-24FS6 is ULC-listed. FCPS-24FS6E: 6.0 A, 240 VAC remote charger power supply. Includes main printed circuit board, transformers, enclosure (15"H x 14.5"W x 2.75"D [cm: 38.1 H x 38.83W x 6.985D]), and installation instructions. ZNAC-4: Class A (Style V) NAG option module. EOLR-1: 12124 VDC end-of-line relay for monitoring four-wire smoke detector power. BAT-11 270: Battery, 12-volt, 7.0 AH (two required). PS-1270: Battery, 12-volt, 7.0 AH (two required). 90286: Optional module mounting kit, is required to install an addressable module on the power supply main circuit board. S NOTE: All NAC outputs can be converted to Style Z with Style V NAG or ZNAC.4 option module. FCPS Door Holder Trouble Power Style Y NAG Style V NAC Style Y NAG Contact Output #4 Output #3 Output #2 Output #1 Output AC Power INPUT/OUTPUT FUNCTIONS are programmable by SWI DIP switch settings 24 VDC Specific Application Power NAC Control Input #2 (from FACP) NAC Control Input #1 (from FACP) Sync Input FCPS Battery Charger Simplified Block Diagram OF-52361:A2 • 5/17/13 - Page 3 of 4 0 4- a) I$KI®! 4 TBI - 4- - - 0J2 J1_ 0 0 Non-Power-Limited J2:ToTranstormer#2 JI:To Transform er#1 LJ 0 J0 F1 0 Fl Battery Fuse III 15A,30V D[] IM ©©©©© L- + Battery AC Power (green) Ground Fault (yellow) JP4: Supervised, Battery Trouble (yellow) Non.Power.Umltsd • NAC Trouble (yellow) 18AH. 24 VDC Charger Trouble/AC Loss (yellow) Auxiliary Output 10 - —Aux. Common 500 mASpecltic IWI- Application Power - +Aux. 24VDC - - Control Input 2 0 - + Control Input 2 - + Oumuble Contact ; - - Out Common 4 - —Control Input 1 3 - + Control Input I 2 - - Sync Input swi - + Sync Input flull,w 0 TM *NOTE., Auxiliary Power Output Is power41mlled SWI: but NOTsupervlsed. Programming DIP Switches T82: Power-Limited, NAClOut 1 + Supervised In NAC Mode NAC/Out 1— with Jumpers J5, JPO, NAC/Out 2 + - 181: Supervised JP7, & JPB In positions NAC/Out 2— - —Earth shown below. NAClOut 3+ NAC/Out 3- - AC Neutral NAClOul4+ I __ • AC Hot NAClOut4 - I Normally Open Normally Closed Common TBS: Trouble Relay ° Form Fall-Safe I I I 0 (shown energized) 3 2 1 TB5 JPI: Ground Fault Detection jp (cut to disable) - J3: ZNAC-4 Connector JP2&JP3: Coded/Non-Coded Input Selection > C., 0 0 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL _____ FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 315-0O75206 Page 1 of 1 CATEGORY: 7315 - POWER UNITS LISTEE: FIRE-LITE ALARMS INC.One Fire-Lite Place, Northford, CT 06410-1653 Contact: Vladimir Kireyev (203) 484-7161 Fax (203) 484-7309 Email: vladimir.kireyev©Honeywell.com DESIGN: Models FCPS-24FS6 and FCPS-24FS8 are power limited power supply/battery chargers used for supervision and expanded power driving capability of up to four Notification Appliance Circuits (FACP Fire Circuits, Signaling Devices) or resettable/non resettable outputs. Model ZNAC-4 Class A converter. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 120 VAC, 24 VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and In a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, product designation, electrical rating and UL label. APPROVAL: Listed as a Power Supply/Battery Charger for use with separately listed compatible fire alarm control units. NOTE: 0 *Rev. 05-06.O5JW This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, Installation instructions and/or other Date Issued: July 01, 2016 Listing Expires June 30, 2df1 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Fire Alarm Systems I D7050 Addressable Photoelectric Smoke and Smoke Heal Detector Heads D7050 Addressable Photoelectric Smoke [1 and Smoke Heat Detector Heads II Invented for life 111jj;/) e Connects to the multiplex bus of the FPD-7024 or D7024 Addressable FACP and the DS7400Xi Control Panel o. Superior dust immunity Exclusive Chamber Check self-diagnostics Automatic sensitivity test features Easy disassembly for cleaning n The D7050 Photoelectric Smoke and Smoke Heat Detector Heads are UL Listed, open-area photoelectric smoke detectors designed for use with commercial fire protective signaling systems and household fire warning systems (see NFPA 72, the National Fire Alarm Code). They are compatible with the FPD-7024 or D7024 Addressable Fire Alarm Control Panels (FACP5), the DS7400Xi Control Panel, and the C Series Control Panels. They detect large smoke particles by scattering light from a pulsed infrared source operating with a gated, high-speed, photodiode infrared sensor. The symmetry of the optical chamber allows 3600 uniform smoke entry, but minimizes external light entry. Use both of these smoke detectors for detection circuits installed in areas where personnel are present. The D7050TH has an added fixed-temperature sensor. This expands the detector application to confined areas where a fire increases air temperature slowly and where there is a substantial increase in air temperature before the fire breaks confinement, such as furnace rooms, closets, and other confined areas. Detector Head and Base System The 07050 Photoelectric Smoke and Smoke Heat Detector Heads are part of a compound system of detector head and base. The detector base installs over a back box and contains all the wiring. The detector head attaches to the base by aligning the head with the base and turning It clockwise. No tools are required for installation other than the hex key used to tighten the tamper screw. Each detector head requires a D7050-136 detector base. Chamber Check Self-diagnostics The detector meets NFPA guidelines for sensitivity testing, because you can visually inspect the detector and check the flash rate of the LED. If the calibration is out of factory-listed range, the LED on the detector double flashes once every 3 sec to 8 sec. Follow the instructions provided with the detector to clean it. The detector also sends a dirty chamber report to the control panel. LED Operation When the detector is operating normally, the LEO flashes once every 3 sec to 8 sec. In alarm, the detector flashes at least once per second. Compatible Products The following products are compatible with the D7050 Smoke Detector and the D7050TH Smoke Heat Detector: Category Product ID Product Description ntrol IFPD7 lç D7024 FACP D7024-EXP FACP for export G Series 09412G (or later), D7412G (or later), and D7212G' (or later) Detector Bases D7050-B6 Two-wire base Remote DRA-12/24 12/24 VDC remote annunciator Annunciators Interface D8125MUX Multiplex bus interface module Modules I The 072 12G models are not UL Listed for commercial fire. Parts ryrrn Quant. Component 1 Detector head 1 Literature pack S 2 I 07050 Addressable Photoelectric Smoke and Smoke Heat Detector Heads I Magnetic Test Feature . Test the detector's operation by placing the SMK-TM Test Magnet next to the detector's LED for three consecutive flashes. This causes the detector to send an alarm. Certifications and approvals Region Certification Europe CE 89/336/EEC, EN55022: 1998, EN50130-4: 1995, EN60950: 2000. EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11 USA UL UROX: Smoke - Automatic Fire Detectors (UL268 and A), UROX7: Smoke - Auto- matic Fire Detectors Certified for Cana- da (cULus) FM CSFM 7272-1615:0175 NYC- 12-92-E, Vol. 14 MEA Hong Kong HKFSD Technical specifications Environmental Considerations Radio Frequency No alarm or setup on critical frequencies in Interference (RFI) the range of 26 MHz to 950 MHz for field Immunity: strengths less than 50 V/rn Temperature +32°F to +100°F (0°C to +38°C) (normal operating): Note: The environment where these detectors are installed must be within the specified normal operating temperature limits. Mechanical Properties Color: off-white Dimensions 4 in. x 1.3 in. (10.2 cm x 3.3 cm) (diameterx D): Material: High-impact, fire-retardant ABS plastic Power Requirements Current (alarm): ':Aiurn Current (standby): 0.55 mAnominalk Power-up Time: 22 sec maximum Voltage (minimum): - 8 VDC peak from the multiplex bus D7050 Addressable Photoelectric Smoke Detector Head The 07050 detects large smoke particles by scattering light from a pulsed infrared source operating with a gated, high-speed, photodiode infrared sensor. The symmetry of the optical chamber allows 360° uniform smoke entry, but minimizes external light entry. Order number D7050 D7050TH Addressable Photoelectric Smoke and Heat Detector Head The D7050TH, in addition to an optical smoke chamber, has an added 135°F (57°C) fixed- temperature sensor that expands its application to confined areas where a fire increases air temperature slowly and where there is a substantial increase in air temperature before the fire breaks confinement. Order number D7050TH Accessories DRA-12/24 Remote Annunciator (12124 VDC) Designed to provide remote annunciation of alarms when connected to the D7050-136 Multiplex Detector Base Order number DRA-12/24 DT-2 Detector Removal Tool Use the DT-2 to remove, replace, or test the detector head Order number DT-2 3 I D7050 Addressable Photoelectric Smoke and Smoke Heat Detector Heads SM K-TM Test Magnet Used to test detectors Order number SMKTM Represented by Americas: Bosch Security Systems. Inc. 130 Perintori Parkway Fairport. New York, 14450. USA Phone: .1 8002690096 Fax: .1585 223 9180 security.saiesCus.bosch.com www.bosthaecurfly.us Europe, Middle East, AMc, Bosch Security Systems B.V. P.O. Boo 80002 5617 BA Ejodhoven, The Netherlands Phone: • 3140 2577 284 Fax: +3140 2577 330 ernea.secuntysy,temsrpbosch.com www.boschsecurity.com ka154ac111c, Robert Bosch (SEA) Pie Ltd, Security StreSS 11 FluMe, Street 21 Singaore 573943 Phone: +65 6571 2808 Fax. +65 8571 2699 apr.secarilynystems@bosch.cem mww.boschsecurity.asla China, Bosch (Shanghai) Security Systems Ltd. 201 Building. No. 333 Fuquas Road North I8P Changnlng District. Shanghai 200335 China Phone +6621 22181111 Fax: 48621 22182398 www.boschsecurity.com.cn America Lathia, Robert Bosch Lida Security Systems Division Via Anhanguera, Km 98 CEP 13065'900 Campinas. San Paulo. Brazil Phone: *55 192103 2860 Fax: *55 19 2103 2852 Ialam.boschtecurityOboscts.com www.boschnecarity.com C Bosch Security Systems 2014 I Data subject to change without notice 2700030219 1 an, V4.17. Feb 2014 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE - LISTING No. 7272-1615:0175 Page 1 of 1 CATEGORY: 7272 - SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC USTEE: BOSCH SECURITY SYSTEMSI30 Perinton Parkway, Fairport, NY 14450 Contact: Jon Wolski (585) 678-3323 Fax (585) 678-3263 Email: jon.wolski@us.bosch.com DESIGN: Models D7050, 07050TH and *07050DH addressable photoelectric type smoke detectors. Model D7050TH employs an integral 1350 fixed temperature heat sensor. This heat sensor is intended for use only as a supplemental device to assist the smoke detector. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: Supplied by Model D7024 series fire alarm control unit through a multiplex bus. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, *date code and UL label. APPROVAL: Listed as photoelectric smoke detectors for use only with listee's separately listed Model D7024 (CSFM Listing No. 7165-1615:147) series fire alarm control unit. Units must be connected to the multiplex bus of the fire alarm control unit for both power and signaling. Model 07050 and D7050TH are intended for use with listee's Model 07050-136 Base (CSFM Listing No. 7300-1615:176). Model D705ODH is intended for use with listee's Model D343 duct detector housing (CSFM Listing No. 3240-1615:181). 0 Rev. 05-29-2007 jw This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing Is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation Instructions and/or other Date Issued: July 01, 2016 Listing Expires June 30, 2017 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Fire Alarm Systems I D7050-B6 Two-wire Detector Base D7050-B6 Two-wire Detector Base i,tTii,iTI?TIIt: / / Connects to multiplex bus of the FPD-7024 or 07024 Addressable FACP, DS7400Xi Control Panel, and G Series Control Panels Detector's head is easily removed by twisting Two-piece detector head and base design allows pre-wiring the system The 07050-B6 is the required base for the D7050 Multiplex Photoelectric Smoke Detector Head and the D7050TH Multiplex Photoelectric Smoke Heat Detector Head. It connects to the multiplex bus of the FPD-7024 or 07024 Addressable Fire Alarm Control Panels (FACPs), the DS7400Xi Control Panel, and the G Series Control Panels. EIEEIIi Notice All versions of the FPD-7024 require a 07039 MIJX Expansion Module. The D7024 FACP requires a 07039 MUX Expansion Module and control panel ROM version 2.0 or higher. Region Certification USA UL UROX: Smoke - Automatic Fire Detectors (UL268 and A), tJR0X7: Smoke - Auto- matic Fire Detectors Certified for Cana- da (cULus) FM CSFM 7300-1615:0176 Region Certification NYC- 12-92-E, Vol. 14 MEA Europe CE 89/336/EEC. EN55022: 1998, EN50130-4: 1995, EN60950: 2000, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11 Installation/Configuration Compatible Products Notes The following products are compatible with the 07050-136 detector base: Category Product ID Product Description Control FPD-7024 FACP Panels 07024 FACP D7024-EXP FACP for export C Series D9412G (or later), D7412G (or later), and D7212G' (or later) Detectors D7050 Multiplex photoelectric smoke detector [I D7050TH Multiplex photoelectric smoke detector with 135°F (57°C) heat sensor Remote DRA-12/24 12 VDC and 24 VDC remote Annunciators annunciator Interface D8125MUX Multiplex bus interface module Modules 'The D7212G models are not UL Listed for commercial fire. 1 Hardware pack 1 Literature pack Environmental Considerations Relative Humidity: 0% to 93% non-condensing Temperature (Operating): +32°F to +100°F (0°C to +38°C) Mounting Considerations The D7050-136 Base can be mounted on a four-Inch square, a four-inch octagonal, or a single-gang box. It can also be surface mounted with anchors, mollies, or wing nuts. Number of Devices Allowed on Loop The number of multiplex smoke or smoke-heat detectors allowed on the multiplex bus is determined by the wire gauge and the total wire length of the bus. Do not exceed 30 Q maximum line resistance. Refer to the D7039 Installation Guide (P/N: 38685)for multiplex bus wiring requirements. Wiring Connection to D7024 MUX bus through D7039 Notice Do not use shielded cable. The D7050-136 bases can be wired in a series or using the T-tap method. See the following illustrations. Series Connection T-tap Connection Parts included Quant. Component 1 Detector base Mechanical Properties Color: Off-white Material: High-impact, fire-retardant polymer plastic 07050-136 Two-wire Detector Base Required base for the D7050 Multiplex Photoelectric Smoke Detector Head and the D7050TH Multiplex Photoelectric Smoke Heat Detector Head Order number D7050-86 Represented byt AmerIcas: Bosch SecurIty Syatoms, Inc. 130 PerIcles Parkway Fairport, New York, 14450. USA Phone: 41 800 289 0096 Fax: +15135 223 9180 oecurity.uiet@us.botth.com www.boschsecurlty.us Europe, Middle East, Africa: Booth Security Systems B.V. P.O. Box 60002 5617 BA Eindhoven, The Netherlands Phone: + 31402577 284 Fax: *3140 2S77 330 emea.eecurltysyntemsfàbosch.com www.boochsecurity.com A5taPadftc Robert Busch (SEA) Pie ltd. Security Systems 11 Biohan Street 21 Singapore 573943 Phone 465 6571 2608 Fax: 465 6571 2699 opr.securitysystemobosch.com www.boschzecurlty.atia China: Bosch (Shanghai) Security Systems Ltd. 201 Building, No. 33.3 Fuguan Road North tsp Chsngning District, Shanghai 200335 China Phone +8521 22181U1 Fax: +88 21 22162398 www.baochsecurity.com.cn America Latina: Robert Bosch Ltda Security Systems Division Via Anhan.guera, Km 98 CEP 13065900 Campinao, Sax Paulo. Brazil Phone: .55 192103 2880 Fax: +55 19 2103 2862 a)securitysystems@bosch.com www.boschsecurlty.com O Bosch Security Systems 2012 I Data subject to change without notice 2705837387 1 en, VS. 28. Aug 2022 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 730O-1615:O36 Page 1 of I CATEGORY: 7300 - FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: BOSCH SECURITY SYSTEMSI30 Pennton Parkway, Fairport, NY 14450 Contact: Jon Wolski (585) 678-3323 Fax (585) 678-3263 Email: jon.woIskius.bosch.com DESIGN: *Model D7050-B6 (2-wire) detector base. Refer to listee's data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having Jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed smoke detector base for use with listee's separately listed compatible Models D7050 series smoke detector (CSFM Listing No. 7272-1615:175) and fire alarm control units. *Recert. 04-22-2007 jw This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, Installation Instructions and/or other 0 Date Issued: July 01, 2016 Listing Expires ie 30, 2017 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Fire Alarm Systems I D254/D255 Fixed-temperature Heat Detector Heads D254/D255 Fixed-temperature Heat Detector Heads I hVL1il • (: Mounts on low-profile six-inch diameter base Easy head removal for cleaning and servicing Available in 135°F (57°C) or 190°F (88°C) fixed settings Optional latching alarm LED Tamper-resistant locking base Use the D254 and D255 Fixed Temperature Heat Detectors for indoor confined areas where a fire increases air temperature slowly and where there is a substantial increase in air temperature before the fire breaks confinement. Furnace rooms, closets, bathrooms, and other confined areas are appropriate applications for fixed temperature detectors. Notice These heat detectors are intended for detection circuits that protect property. Use smoke detectors to protect personnel. Use the D254 (response-rated at 135° F [57°C]) in areas where the ambient temperatures do not exceed 100°F (380C). Use the D255 (response-rated at 190°F [880C]) in areas where the ambient temperatures do not exceed 150°F (660C). These detectors operate in 12 and 24 VDC detection circuits using a variety of Bosch detector bases. A latching steady-on LED is available when these heads are used with the D253 24 VDC base or the D271S 12 VDC base. Detector Head and Base System These heat detectors have two components: the detector base and the detector head. The bases are permanently attached and wired to back boxes. The interchangeable heads quickly detach for replacement and cleaning without affecting the circuit wiring. Detection Method These heat detectors use a push-rod activated by a bi- metal disk to manually close internal contacts and initiate an alarm condition. The disk, which deflects at a pre-determined temperature, snaps back to its original shape when the temperature drops, opening the contacts and canceling the alarm signal. This simple design results in stable detectors that are dependable and have a long operational life. They are unaffected by barometric pressure and air flow and remain reliable over a wide range of conditions. Region Certification USA UL UQGS: Heat - Automatic Fire Detectors (UL521) CSFM see our website NYC- 284-91-E, Vol. 2 MEA Compatible Products The following products are compatible with the D254 and D255 Heat Detector Heads: Category Product ID Product Description Control Panels D7022 Conventional FACP 07024 Conventional FACP 07024 Addressable FACP 09124 Addressable FACP Detector Bases 0250A Two-wire conventional detector base (12 VDC or 24 VDC) 0253 Two-wire conventional detector base (24 VDC) D271S Addressable smoke and heat detector base (12 VDC) D291M Master addressable detector base (24 VDC) D29 1S Addressable detector base (24 VDC) Mounting The detector base installs over a back box and contains all the wiring. The detector head attaches to the base by hand. Align the head with the base and turn it clockwise. No tools are required for installation other than the hex key used to tighten the tamper screw. Wiring Refer to the installation instructions for the specific base for detailed wiring requirements. Quant. Component 1 0254 or D255 detector head 1 Hardware pack 1 Literature pack 5 Environmental Considerations Temperature D254: +32°F to + 100°F (0°C to +38°C) (ambient): D255: +32°F to + 150°F (0°C to +66°C) Mechanical Properties Color: Bone white Dimensions (diameter x 0): 6 in. x 2 in. (15.2 cm 5cm) Response Time: <120 sec Power Requirements Voltage (operating): 12 VDC or 24 VDC S D254 Fixed-temperature (135°F [57°C]) Heat Detector Head Fixed-temperature (135°F [570C]) mechanical heat detector head for use in 12 VDC or 24 VDC nominal circuits; requires a base. Order number D254 D255 Fixed-temperature (190°F [880C]) Heat Detector Head Fixed-temperature (190°F [880C]) mechanical heat detector head for use in 12 VDC or 24 VDC nominal circuits; requires a base. Order number D255 3 I D254/D255 Fixed-temperature Heat Detector Heads S Represanted by: Americas: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: -1800 289 0096 Fax: -1685 223 9180 security.sales@as.bosch.com www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: 3140 2577 284 Fax: +3140 2577 330 emea.securitysystems@bosch.com www.boschsecarlty.com Asia-Pacific: Rohet Bosch (SEA) Ftc Ltd, 3ecrlty Sys-.ms 11 Bhan Street 21 Singapore 573943 Phore: *65 6571 2803 Fat: 55 6571 2699 ayr.axcuritysystems@bosch.om www aoschsecurity.a:ia China: Bosch (Shanghai) Security Systems Ltd. 201 Building, No. 333 Fuquan Road North iBP Changning District, Shanghai 200335 China Phone *862122181111 Fax: *86 21 22182398 www.boschsecurity.com.cn America Latina: Robert Bosch Ltda Security Systems Division Via Anhanguera. Km 98 CEP 13065900 Campinas. Sao Paulo, Brazil Phone: *55 19 2103 2860 Fun: *55 19 2103 2862 latam.boschsecsrity@bosch.com www.boschsecurity.com © Bosch Security Systems 2014 I Data subject to change without notice 2700145163 1 en, V2, 04. Aug 2014 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL S FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7270:1653:0167 Page 1 of 1 CATEGORY: 7270 - HEAT DETECTOR LISTEE: System Sensor, Unincorporated Div of Honeywell Intl lnc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Vladimir Kireyev (630) 762-5025 Fax (630) 377-7245 Email: Vladimir.KireyevthoneywelI.com DESIGN: Models 5601, 5601P, 5602, 5621, and 5622 combination fixed-temperature and rate-of-rise type and Models 5603, 5604, 5623, and 5624 fixed-temperature mechanical heat detectors. Refer to listee's data sheet for detailed product description and operational considerations. RATING: Models 5601, 5601P, 5603, 5621, & 5623 have a fixed temperature of 135°F. Modelc! 5604, 5622, & 5624 have a fixed temperature of 194°F. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and In a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, temperature/electrical rating, and UL label. APPROVAL: Listed as heat detectors for use with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details and UL directory for dimensions. NOTE: Formerly 7270-1209:227 S 06-20-05 This listing Is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the Item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, Installation instructions and/or other 0 Date Issued: July 01, 2016 Listing Expires j June 30, 2011, Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Fire Alarm Systems I D7052 Multiplex Dual-input Module D7052 Multiplex Dual-input Module II i IWk1il Use with D7024, DS9400M, or FPD-7024 Addressable FACPs Fits into a standard double-gang or four-inch square back box Easy addressing using rotary switches Low current draw UL Listed The D7052 Multiplex Dual-input Module connects normally-open (NO) contacts to the multiplex bus of a D7024, DS9400M, or FPD-7024 Addressable Fire Alarm Control Panel (FACP). Use the module for two Class B (Style B) supervised inputs or one Class A (Style D) input. All operating power for the input module is drawn from the FACP. Notice L......J The 07024 and DS9400M are not listed under U1864, 9th edition. Rotary switches allow convenient address setting. An on-board status LED on the module indicates normal, alarm, and trouble conditions and is visible on the module or on an attractive, low-profile faceplate. Region Certification Region Certification CSFM seeourwebsite FONY- #6173 CoA Compatible Products The following products are compatible with the D7052 Multiplex Dual-input Module: Category ProductiD Product Description Control D7024 Addressable FACP Panels D7024-EXP Addressable FACP for export DS9400M Addressable FACP FPD-7024 Addressable FACP Modules D7039 Multiplex expansion module USA UL UOJZ: Control Units, System (ANSI/UL Mounting 864) and UOXX: Control Unit Accesso- Mount the module on a double-gang or four-inch ries. System (ANSI/UL 864) square back box. FM D7052 Wiring Make connections to the terminals on the rear of the module. All terminals can accommodate up to 12 AWG (ISO 4 mm2) wire; however, follow wiring guidelines specified by the National Electrical Code (NFPA-70). All wiring is power limited and supervised. Notice Do not use shielded wire. Notice Supervise Class B input loops with the supplied EOL resistors. A Class A loop does not require an EOL resistor. Quant. Component 1 07052 module 2 221k0end-of-Iine(EOL) resistors (P/N: 25899) 1 Literature pack 1 Hardware pack S Circuit Designation MUX Bus: Supervised Class A (Style 6) SLC or Class B (Style 4) SLC Input: Supervised Class A (Style D) IDC or Class B (Style B) IDC Environmental Considerations Environment: Indoor, dry Relative Humidity: Up to 93% non-condensing Temperature (operating): +32°F to +120'F (0°C to +49°C) Inputs Type: Two normally-open (NO) Class B (Style B) contact inputs or one Class A (Style D) contact input supervised by a 2.21 kfl EOL resistor (P/N: 25899) Mechanical Properties Color: White Dimensions: 4.3125 in. (10.9 cm) square by 1.0625 in. (2.7 cm) deep Material: ABS plastic Weight: 3.90z(110g) Power Requirements (supplied from FACP's MUX bus) Current: 0.55 mA Voltage (minimum): 8V peak (12VDC nominal) D7052 Multiplex Dual-input Module The D7052 connects normally-open (NO) contacts to the multiplex bus of a D7024, DS9400M, or FPD-7024 FACP. The 07044's input power is drawn from the FACP for use in two Class B (Style B) supervised inputs or one Class A (Style D) input. Rotary switches allow convenient address setting. Order number D7052 R.pr.o.ntod by, Amenleaur Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone -1800 289 0096 Fux .1585223 9180 oeeurity.saies@us.bosch.com www.boschsecurlty.us Europe, Middle East, Africa, Bosch Security Systems BY. P.O. Boo 80002 5617 BA Eindhoven, The Netherlands Phone: + 3140 3577 284 Fax: +3140 2577 330 emea.securiiysystems@bosch.com www.bosdssecurlty.com As .a-Pacific: Rort Bosch (SEA) Pte Ltd. Security Syste,s 11 BiuhanS5reet 21 Srga.30r0 573943 Pane, 4656571 2809 Far +65 8571 2699 apr.oecuri1yoystemo@bouch.com www.boschsecurity.asla China, Bosch (Shanghai) Security Systems Ltd. 201 Building, No. 333 Fuquen Rood North IBP Changnlng District. Shanghai 200335 China Phone +86 21 22161111 Fu 186 21 22182398 www.boschsecurity.com.cr America Latina, Robert Bosch Ltda Security Systems Division Via AnhangUera, Km 98 CEP 13065-900 Campinas, Sao Paulo, 8mi1 Phone +55 09 2103 2860 Faa4 455 15 2003 2862 iatom.boschsecuritybosch.com www.boochancurlty.com o Bosch Security Systems 2014 I Data subject to change without notice 2892044555 1en, V4. 22. Jul 2014 Region Certification CSFM see our website FDNY- #6173 CoA Installation/configuration notes Compatible Products The following products are compatible with the D7053 Multiplex Input-output Module: Category ProductlD ProductDesctiption Control D7024 Addressable FACP Panels D7024-EXP Addressable FACP for export DS9400M Addressable FACP FPD-7024 Addressable FACP Modules D7039 Multiplex expansion module Mounting Mount the module on a double-gang or four-inch square back box. www.boschsecurity.com 0 0020scmn Invented for life (FOR DOOR HOLDER RELEASE) Use with D7024, DS9400M, or FPD-7024 Addressable FACPs Fits into a standard double-gang or four-inch square back box P. Easy addressing using rotary switches Low current draw UL Listed The D7053 Multiplex Input-output Module is a general purpose device that monitors a normally-open (NO), supervised contact device and provides a separately controlled Form C relay output. The module connects to the multiplex bus in either a Class A (Style 6) or Class B (Style 4) configuration. All operating power for the module is drawn from the control panel's multiplex bus. Rotary switches allow convenient address setting. An on-board status LED on the module indicates normal, alarm, and trouble conditions and is visible on the module or on an attractive, low-profile faceplate. 571 Notice The D7024 and DS9400M are not listed under UL864, 9th edition. Certifications and approvals Region Certification USA UL UOJZ: Control Units, System (ANSI/UL S 864) and UOXX: Control Unit Accesso- ries, System (ANSI/UL 864) FM D7053 2 I D7053 Multiplex Input-output Module Wiring Make connections to the terminals on the rear of the module. All terminals can accommodate up to 12 AWG (ISO 4 mm2) wire; however, follow wiring guidelines specified by the National Electrical Code (NFPA-70). All wiring is power limited and supervised. Eli Notice Do not use shielded wire. Supervise the Class B input loop with the supplied EOL resistor. Parts Quant Component 1 D7053 module 1 2.21 kf) end-of-line (EOL) resistor (P/N: 25899) 1 Literature pack Power Requirements (supplied from FACP's MUX bus) Current: 0.70mA Voltage (minimum): 8 V peak (12 VOC nominal) D7053 Multiplex Input-output Module The D7053, powered by its connection to the multiplex bus of a 07024, DS9400M, or FPD-7024 FACP in either a Class A (Style 6) or Class B (Style 4) configuration, monitors a normally-open (NO) contact device and provides a separately controlled Form C relay output. It is addressed by rotary switches. Order number 07053 Circuit Designation MUX Bus: Supervised Class A (Style 6) SLC or Class B (Style 4) SLC Input: Supervised Class B (Style B) IDC Environmental Considerations Environment: Indoor, dry Radio Frequency No setup or alarm on critical frequencies Interference (Rfl) in the range from 26 MHz to 950 MHz for Immunity: field strengths less than 30 V/rn Relative Humidity: Up to 93% non-condensing Temperature (operating): +32°F to +120°F (0°C to +49°C) Inputs Type: One normally-open (NO) Class B (Style B) contact input supervised by a 2.21 kf) EOL resistor (P/N 25899). Mechanical Properties Color: White Dimensions: 4.3125 in. (10.9 cm) square by 1.0625 In. (2.7 cm) deep Material: ABS plastic Weight: 390z(110g) Outputs Alarm: Reports alarm and point number to FACP Relay: One set of Form C (NO/C/NC) contacts rated for 120 VAC at 0.5 A. 24 VDC at 1.0 A, resistive loads only Trouble: Reports trouble and point number to FACP - 3 I D7053 Multiplex Input-output Module S [1 S Represented byu Americas, Bosch Security Systems, Inc. 130 Perfrdon Partway Fairport. New York. 14450. USA Phone: *1 800 289 0098 Few +1565 223 9180 securlty.sales10us.bosch.com www.beschsecurity.us Europe, Middle East, Africa, Beech Security Systems B.V. P.O. Box 80002 5617 BA Eindhoven. The Netherlands Phone: * 31402577 284 Fax: *3140 2577 330 emea.secwityoystemsbosch.com www.beschsecurily.com AJa.Padllc, Robert Bosch (SEA) Pte Ltd. Security Systems 11 Bishar, Street 21 Singapore 573943 Phone: .65 6571 2808 Fax: *65 6571 2699 apr.securitysyotems@bosc1r.com www.boschsecunty.asia Chin., Bosch (Shanghai) Security Systems Ltd. 201 Building, No. 333 Fuquan Road North IBP Clrangning District, Shanghai 200335 China Phone o09 21 22181111 Fax, +86 21 22182398 www.boschsecurIty.com.cn America Latin., Robert Bosch Ltda Security Systems Division Via Anhonguero. Cm 98 CEP 13065.900 Campinas, Sue Paulo, Brazil Phone: *55 1921032890 Fax: +55 192182 2862 latom.bosth3ecsfl1y@boscls.com www.boschsocuriiy.com 10 Bosch Security Systems 20141 Data subject to change without notice 2692090379 1en. V4. 22. Jul 2014 Product ID Product Description D7024 Addressable FACP D7024-EXP Addressable FACP for export DS9400M Addressable FACP FPD-7024 Addressable FACP D7039 Multiplex expansion module Fire Alarm Systems I D7044 Multiplex Single-input Module D7044 Multiplex Single-input Module WE i M11"; ?A'A'AhTl444IIlk'Ks{.]iI Invented for life 111. Use with 07024, DS9400M, or FPD-7024 Addressable FACPs P. Fits into a standard double-gang or four-inch square OD back box - Easy addressing using rotary switches Low current draw It UL Listed The 07044 Multiplex Single-input Module connects a Region Certification normally-open (NO) contact to the multiplex bus of a 07024, DS9400M, or FPD-7024 Addressable Fire Alarm CSFM see our website Control Panel (FACP). Use the D7044 supervised Input FDNY- #6173 in a Class B configuration. All operating power for the CoA input module is drawn from the FACP. Installation/configuration notes Notice Compatible Products D7024 and DS9400M are not listed under UL864, The following products are compatible with the D7044 9th edition. Multiplex Single-input Module: Rotary switches allow convenient address setting. Category An on-board status LED on the module indicates normal, alarm, and trouble conditions and Is visible on Control the module or on an attractive, low-profile faceplate. Panels Certifications and approvals M Modules Mounting Mount the D7044 on a double-gang or four-inch square back box. 0 Region Certification USA UL NBSX: Household Burglar Alarm System Units (ANSI/UL 1023), UOJZ: Control Units, System (ANSI/UL 864), and UOXX: Control Unit Accessories, System (ANSI/UI 864) FM 07044\D7044M 2 I D7044 Multiplex Single-input Module Wiring ordering information S Make connections to the terminals on the rear of the D7044. All terminals can accommodate up to 12 AWG D7044 Multiplex Single-input Module (2.3 mm) wire; however, follow wiring guidelines The D7044 connects a normally-open (NO) contact to specified by the National Electrical Code (NFPA-70). the multiplex bus of a D7024, DS9400M, or FPD-7024 All wiring is power limited and supervised. FACP. The D7044's supervised input power is drawn from the FACP for use in a Class B configuration. Notice Rotary switches allow convenient address setting. 1 Supervise the input loop with the supplied EOL Order number D7044 resistor. Quant Component 1 D7044 module 1 2.21 kf) end-of-line (EOL) resistor (P/N: 25899) 1 Literature pack 1 Hardware pack Technical specifications Circuit Designation MUX Bus: Supervised Class A (Style 6) SLC or Class B (Style 4) SLC Input: Supervised Class B (Style B) IDC Environmental Considerations Environment: Indoor, dry Relative Humidity: Up to 93% non-condensing Temperature (operating): +32°F to +120°F (0°C to +49°C) Input Type: One normally-open (NO) contact input supervised by a 2.21 kf) EOL resistor (P/N: 25899) Mechanical Properties Color: White Dimensions: 4.3125 in. (10.9 cm) square by 1.0625 in. (2.7 cm) deep Material: ABS plastic Weight: 3.9 oz (110 g) Power Requirements (supplied from FACP's MUX bus) (0.55 mA (Voltage (minimurn) 0 3 1 D704'1 Multiplex Single-input Module R.pr.oent.d by Amenlcus Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New Yonir. 14450. USA Phone: 41800 289 0096 Fax: +1585 223 9180 securlty.saleo@us.bosch.com www.boschsecurity.as Europe, Middle East, Africa, Bosch Security Systems By. P.O. Box 80002 5817 BA Eindhoven, The Netherlands Phone: * 3140 2577 284 Fax: #3140 2577 330 emex.oecuritysystemsbescIs.com www.boschsecurity.com Aalapaclflc, Robert Bosch (SEA) Pte ti'. Security Systems 11 Biohan Street 21 Singapore 573943 Phone: 455 5571 2808 Fax: 465 6571 2699 opr.oecurilysystemsbc.cb.com www.bescho.cunity.asia China, Bosch (Shanghai) Security Systems Ltd. 201 Building. No. 333 Fuqunri Road North ISP cltangnieg District. Shanghai 200335 China Phone +86 2122181111 Fax: +8521 22182398 www.boschsecurfty.com.cr, America Latins- Robert Bosch Lida Security Systems Division Via Anhanguera. Km 98 CEP 13065900 Cavnpinas, Soo Paulo, Brazil Phone: 455 192103 2860 Fart 455 192103 2882 latam.boschsecurity@bosch.com www.boschsecurriy.com S S o Bosch Security Systems 2014 I Data subject to change without notice 2891757963 1 en, V5. 22. Jul 2014 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM S LISTING SERVICE Ilk LISTING No. \716_1615:0227 Page 1 of I CATEGORY: 7165 - FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE: BOSCH SECURITY SYSTEMSI30 Perinton Parkway, Fairport, NY 14450 Contact: Jon Wolski (585) 678-3323 Fax (585) 678-3263 Email: jon.woIski@us.bosch.com DESIGN: Model FPD-7024 fire alarm control unit. Power limited, local, automatic, manual, coded, noncoded, remote station (PPU), proprietary (PPU), central station (PPU), waterfiow and sprinkler supervisory service. Refer to the listee's data sheet for additional components description. System components: FPD-7024; Control Unit FPC-7034; 4-Zone Expander FMR-7033, FMR-7036; Keypad 07035, D7035B; Expanded Relay Module D185; Reverse Polarity Module D7039; MUX Expander 07042, D7042B, D7044, D7044M, D7052, D7053; Mulitplez Expander Module 07048, 07048B; Octal Driver Module B440, B441, *5443; Cellular Modules 5450; Interface Module RATING: 120 VAC primary; 24 VDC Secondary INSTALLATION: In accordance with the listee's printed installation Instructions, NFPA 72, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed as a fire alarm control unit for use with separately listed compatible initiating and Indicating devices. Refer to listee's Installation Instruction Manual for details. This control unit can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. This control unit meets the requirements of UL Standard 864, 9th Edition. NOTE: For Fire Alarm Verification Feature (delay of fire alarm signal), the maximum Retard/Reset/Restart period shall not exceed 30 seconds. *Re fon 09-20-16 dc This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing Is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or Installation criteria. Refer to listee's data sheet, installation Instructions and/or other Date Issued: July 01, 2016 Listing Expires j,June 30, 201 Authorized By: DAVID CAS71LLO, Program Coordinator Fire Engineering Division SYSTEM SENSOR Multi-Voltage Conventional Relays System Sensor's multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing. (FOR DOOR HOLDER RELEASE) Features Multi-voltage operation Activation LEDs Easy and flexible installation Reliable and robust design Multipurpose field installations Multi-voltage relays with terminal strip field wiring connections, mounting track, and hardware for R-1 OT/20T and R-1 4T/24T Removable front cover on steel enclosure for R-1 OE/R-20E and R- 14/R-24E, which mount inside the enclosure LED viewing hole on top of the steel enclosure's cover Extra pair of wires for redundant power input on PR-3 Terminal strip field wiring connections, mounting track, and hardware The R-10T, R-20T, R-14T, and the R-24T models are multi- voltage relays with terminal strip field wiring connections, mounting track, and hardware. The RIOT is single FORM-C (SPDT) relay with a red activation LED, and the R-1 4T Is a four-gang 1 FORM-C (SPDT) relay with four red activation LEDs. The R-201 is single 2 FORM-C (DPDT) relay with a red activation LED, and the R-24T is four-gang 2 FORM-C (DPDT) relay with four red activation LEDs. The R-1OEIR-20E and R-I4EIR-24E are similar to the T-series track mount relays, but they are mounted into a steel enclosure. The enclosure has a removable front cover that provides easy access and an LED viewing hole on the top of the cover. PR-I IPR-2JPR-3 are epoxy encapsulated multi-voltage relays. They are single-pole double-throw relays that use a red LED as a visible indication of relay coil energization. PR-3 is identical to PR-2, except it has an extra pair of wires for redundant power input. Model EOLR-1 is an epoxy encapsulated, single-pole single-throw, normally open relay that can be used as an end of line device in fire alarm systems, e.9, to supervise power supplies. Agency Listings @ MEA LISTED approved Multi-Voltage Conventional Relay Specifications IiA. j1_... I Operating Voltage 18-35VDC, 18 - 35 V< 115 VAC, 230VAC Operating Voltage 18-3SVDC, 18-35VAC, 120 VAC Operating Current 20 mA DC max. @24 VDC, 24 VAC, 115 VAC, Operating Current 15 mA DC max. @24 VDC, 24 VAC, 120 VAC 230 VAC (R101/R14T) nnerMinnr'mnerature _40°rn ic'c 1-40°c to 70*0 40 mA DC max. @ 24 VDC, 24 VAC, 115 VAC, 230 VAC (R-201/R-241) Operating Temperature -40°F to 158°F (-40°C to 70°C) Humidity Range 10% - 93% non-condensing Dimensions R-10T/R-20T: 251 x 335W x 121-I R-14T/R-241: 101x3.35Wx 12H Contact Ratings 24 VDC: 7 A with L/R = 5 mS 120 VAC 10 120 VAC 1/6 HP 230 VAC 7 A Operating Voltage 18-3SVDC, 18-35VAC, 11S VAC, 23OVAC Operating Current 20 mA DC max. @24 VDC, 24 VAC, 115 VAC, 230 VAC (R-10E/R-14E) 40 mA DC max. @ 24 VDC, 24 VAC, 115 VAC, 230 VAC (R-20E/R-24E) Operating Temperature -40°F to 158°F (-40°C to 70°C) Humidity Range 10% - 93% non-condenslng Dimensions R-1 OUR-20E. 5.11 x 3.75W x 2.51-I R-14E/R-24E 111.x5.3'Wx231-1 Contact Ratings 24 VDC--'7 A with hR = 5 mS 120 VAC 10 A 120 VAC 1/6 HP 230 VAC: 7 A Humidity Range 10-93% RH Wire Length 8mlnlmum Dimensions NTH x2.01'Wx 1.42D Contact Ratings 24VDC: 7 A with L/R = 5 mS 120 VAC: 7 A max. (0.35 PF) 250 VAC 10A resistive 30 VDC.- 10 A resistive Operating Voltage 10 to 4OVDC Operating Current 30 mA DC max. Operating Temperature -40°F to 158°F (-40°C to 70°C) Humidity Range 10- 93% RH Were Length 8-minimum Dimensions 0.91'Hx 165Wx 1221) Contact Ratings 120 VAC 10 A max. (resistive load) 120 VAC 7 A max. (0.35 PF) 250 VAC: 10 A max. (resistive load) 30 VDC: 10 A max (resistive load) Operating Voltage 9 to 40 VDC Operating Current 20 mA DC max Operating Temperature -22°F to 140°F (-30°C to 60°C) Humidity Range 10- 93% RH Wire Length minimum Contact Ratings 120 VAC 0.5 A max. (resistive load) 30VDC 3 A max. (resistive load) PR-1 EOLR-1 PR-3 R-1 CE & R-20E Enclosure PR-2 R-10T R-14T R-14E & R-24E Enclosure t °'°'°'\ .au'TLE'tY1 3825 Ohio Avenue. St. Charles, IL 60174 %._$ Phone: 800-SENSOR2 Fax 630-377-6495 OO1m5njo.. Pext DS-03724VS. ''. II7, CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL S FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-1653:0172 Page 1 of I CATEGORY: 7300— FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES USTEE: System Sensor, Unincorporated Div of Honeywell Intl Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Vladimir Kireyev (630) 762-5025 Fax (630) 377-7245 Email: Vladimir.Kireyev@honeywelLcom DESIGN: Models PR-I, -2, -3 Mufti-Voltage Relay. Refer to listee's data sheet for detailed product description and operational considerations. RATING: PR-1 = 24 VDC/ (+); 24 VAC; 120 VAC, 60 Hz PR-2, -3= 10-40VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING; Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. NOTE: Formerly 7300-1209:232 06-20-05 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2016 Listing Expires (June 30, 2017 5 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division [Fire Alarn SI 'FM7O5 Series TM uti iIex Adce 61M - ®SCH Invented for life FMM-7045 Seides MuKlp~ex AddressaWe ManuM StaVons Easy addressing with rotary switches Low current draw Key-lock reset Replaceable scored acrylic breakrod option ' Terminal connections ADA compliant UL Listed The FMM-7045 Series Multiplex Manual Stations are UL Listed fire alarm initiating devices that can be connected along with other multiplex devices on the D7039 Multiplex Expansion Module. The FPD-7024 or 07024 Addressable Fire Alarm Control Panel (FACP) supervises the entire multiplex loop, Including the FMM-7045 or FMM-7045-D manual stations, for troubles, alarms, and ground fault conditions. Because each manual station occupies only one address on the multiplex bus, it can be addressed for any point within the 9 to 255 range allowed by the multiplex expansion module. These manual stations are generally installed near building exits such as stairways and doors, allowing persons evacuating the building to activate the fire alarm. They have optional scored acrylic breakrods and a pull handle that locks in the activated position, to allow easy identification of alarm activation points. These manual stations are high-quality units constructed entirely of non-toxic materials. They have a low profile and rounded edges to fit most design applications. All components are painted or have plated surfaces to inhibit corrosion. Non-corroding screw terminals are provided for wire connections. They are manufactured in conformance with the standards set forth in the Americans with Disabilities Act (ADA). Functions Alarm Action The single-action FMM-7045 has a white pull-down lever in its center. The dual-action FMM-7045-D has a white push lever above the white pull-down lever in its center. Pulling down the pull-down lever latches it into place and sends an alarm signal to the control panel over the multiplex bus. The pull-down lever cannot be reset unless the correct key is inserted into the manual station's lock and the unit is opened. The latching lever can then be restored to its normal position. Certifications and Approvals Region Certification USA UL UNIU: Boxes. Non-Coded (UL38) CSFM 7150-1615:122 NYC-MEA 12-92-E, Vol. 14 ADA Complies with Americans with Disabilities ACt ADA 4.28.3 NFPA Complies with National Fire Protection As- sociation NFPA 72 www.boschsecurity.com 2 I FMM 7045 Series Multiplex Addressable Manual Stations Installation/Configuration Notes Compatibility Information The FMM-7045 Series Multiplex Manual Stations are compatible with a FPD-7024 FACP or a D7024 FACP with firmware revision 2.0 or greater with a D7039 Multiplex Expansion Module. Addressing Addresses are set using three rotary switches. Refer to the 07024 FACP Operation and Installation Guide (P/N: 31499) or the FPD-7024 Operation and Installation Guide (P1 N F01U008458) and the FMM-7045, FMM-7045-D Multiplex Addressable Manual Stations Installation Instructions (PI N: F01U001402) for programming information. Mounting The FMM-7045 manual stations are for indoor use only. Note If a pull station is needed for outdoor use or in an unheated area, use an FMM-100 Series Pull Station rated for the environment and wired to a multiplex module within the interior of the building. Technical Specifications Environmental Considerations Environment: Dry, indoor Radio Frequency No alarm on critical frequencies in the range Interference (RFI) from 26 MHz to 950 MHz at field strengths Immunity: less than 30 V/m. Temperature (Operating): +32°F to +120°F (0°C to +49°C) Mechanical Properties Dimensions (H x W x 0): 4.75 in. x 3.75 in. x 3.25 in. (12 cm 9.5 cm 8.2 cm) Material: Die cast zinc alloy and steel Power Requirements Voltage (Operating): 12 VDC nominal (provided by the MUX bus) Ordering Information (Current Draw (Mux Bus Alarm: 0.55 mf (Average): 4Standby: 0.55 mA' FMM7045 Single-Action Manual Station FMM-7045 The FMM-7045 manual stations flush or surface mount on a A UL Listed fire alarm initiating device that can standard four-inch square back box with a single-gang mud be connected, along with other multiplex de- ring so that the total depth of the box is at least 2.25 in. vices, on the D7039 Multiplex Expansion Mod- (5.7 cm). ule and Is supervised by the FPD7024 or 07024 Addressable FACP Note The FMM-7045 does not fit an FMM100BBR FMM7045-D Double-Action Manual FMM•7045-D Back Box. Station Wiring A UL Listed fire alarm initiating device that can The terminal block accepts wiring up to 12 AWG (2.3 mm) be connected, along with other multiplex de- vices, on the D7039 Multiplex Expansion Mod- in diameter. Refer to the 07039 Installation Instructions (P1 ule and Is supervised by the FPD-7024or N: 38685) for multiplex wiring information. D7024AddressabIeFACP Accessories Parts Included Quant. Component 1 Manual station 1 FMM-1006R Scored Acrylic Breakrod 1 D102 Key (1358) 1 Literature pack D102 Replacement Key D102 Replacement key (#1358) for the D101 lock. FMM-100GR Scored Acrylic Break Rods FMM•100GR Scored acrylic rods (12 per package) Ani.rlcaus Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York. 14450, USA Phone. *18002890096 Fax: +1 585 223 9180 oecurity.sutesoun.booch.com www.boschsecurity.us Europe, Middle East, Africa, Bosch Security Systems By. P.O. Box 80002 5600 JS Eindhoven. The Netherlands Phone: + 3140 2577 284 Fax, +3140 2577 330 emea.securltysystemsebosch.com www.boscha.curlty.com ulaPacific, Represented by Robert Bosch (SEA) Pte Ltd, Security Systems 11 alshun Street 21 Singapore 513943 Phone: +65 6258 5511 Fax: +65 6571 2698 apr.aecurltysystems@boxch.com www.bcschsecurfty.com O Bosch Security Systems Inc. 20101 Data subject to change without notice 11953041035 (Cur: en-US. Y9.4 Jul 2010 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE . ,------ -----.--. LISTING No. t7:1501615:0122 Page 1 of I CATEGORY: 7150 - FIRE ALARM PULL BOXES LISTEE: BOSCH SECURITY SYSTEMSI30 Perinton Parkway, Fairport, NY 14450 Contact: Jon Wolski (585) 678-3323 Fax (585) 678-3263 Email: jon.wolski@us.bosch.com DESIGN: Models, FMM.462, FMM-462-D, FMM-325A, FMM-325A-D,/FMM-7045, and FMM-7045-D fire alarm manual pull stations. Refer to listee's data sheet for detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinance and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as manual pull stations for use with listee's separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. * These manual pull boxes meet the requirements of UL Standard 38, 1999 Edition and California amendments. 0 NOTE: FORMERLY: 7150-0801:131 Rev. 12-15-2009 fm This listing Is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other 0 Date Issued: July 01, 2016 Listing Expires ,4un'302017 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division € SYSTEM $ SENSOR! Selectable-Output Low Frequency Sounder and Low Frequency Sounder Strobes for Wall Applications SpectrkerlO Advance audible visible notification products are rich with features guaranteed to cut installation times and maximize profits. Features Plug-in design with minimal intrusion into the back box Tamper-resistant construction Field-selectable candela settings on wall units: 135, 150, 177, and 185 Rotary switch for low frequency sounder tone Universal mounting plate for wall units Mounting plate shorting spring checks wiring continuity before device installation Electrically compatible with legacy SpectrAlert devices Compatible with MDL3 sync module Listed for ceiling or wall mounting SPECTRert The SpectrAlert Advance series offers the most versatile and easy-to-use line of low frequency sounder and low frequency sounder strobes in the industry. With white and red plastic housings, dual listed for wall and ceiling mounting, SpectrAlert Advance can meet virtually any application requirement. Like the entire SpectrAlert Advance product line, wall-mount low frequency sounder, and low frequency sounder strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults. To further simplify installation and protect devices from construction damage, SpectrAlert Advance utilizes a universal mounting plate with an onboard shorting spring, so installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for low frequency sounder tones. Agency Listings SmNAUIIG ®43>MEA LISTED APPROVED approved S4011 (sounder) 3047563 M6A452-05•E 7135-1653:0223 55512 (strobes) 7125-1653:0224 SpectrAlert Advance Specifications General SpectrAlert Advance low frequency sounder and low frequency sounder strobes shall mount to a standard 4 x 4 x 111/2-inch back box, 4-inch octagon back box, or double-gang back box. Two-wire products shall also mount to a single-gang 2 x 4 x 1718-inch back box. A universal mounting plate shall be used for mounting products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync.Circuit' Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync'Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full- wave rectified unfiltered power supply. Low Frequency Sounder strobes shall have field-selectable candela settings including 135, 150, 177, and 185. Low Frequency Sounder The low frequency sounder shall be a System Sensor SpectrAlert Advance Model ______ listed to UL 464 and shall be approved for fire protective service. The low frequency sounder and the Sync.CircuitTM MDL3 Module accessory, if used, shall be powered from a notification appliance circuit output and shall operate on a nominal 12 or 24 volts (includes fire alarm panels with built in sync). When used with the Sync'Circuit Module MDL3, 12-volt rated notification appliance circuit Outputs shall operate between 8.5 and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 16.5 to 33 volts. If the notification appliances are not UL 9th edition listed with the corresponding panel or power supply being used, then refer to the compatibility listing of the panel to determine maximum devices on a circuit. The low frequency sounder has an option to switch between temporal three pattern, non-temporal (continuous) pattern and coded supply. The low frequency sounder shall operate on a coded or non-coded power supply. Low Frequency Sounder Strobe Combination The low frequency sounder strobe shall be a System Sensor SpectrAlert Advance Model ______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The low frequency sounder strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The sounder shall have an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. The low frequency sounder on low frequency sounder strobe models shall operate on a non-coded power supply. Synchronization Module . The module shall be a System Sensor Sync.Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1 Hz and low frequency sounder at temporal three. Also, while operating the strobes, the module shall silence the low frequency sounder on low frequency sounder strobe models over a single pair of wires. The module shall mount to a 411/16 x 4/16 x 21/a-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. Physic a I/Electrical Specifications Standard Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non-condensing Strobe Flash Rate 1 flash per second Nominal Voltage Low Frequency Sounder Regulated 12 DC/FWR or regulated 24 DC/FWR1 Nominal Voltage Range Low Frequency Sounder Strobe Regulated 24 VDC/FWR1 Operating Voltage Range 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage Range MDL3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal) Input Terminal Wire Gauge 12 to 18 AWG Wall-Mount Dimensions (including lens) 6.4 Inches L x 4.7 inches W x 2.5 inches D (162 mm Lx 119 mm W 64 mm D) Sounder Dimensions 5.6 inches L x 4.7 inches W x 1.3 inches D (142mmLx 119 mm W x 33 mm D) Low Frequency Sounder/Strobe with Surface Mount Back Box Dimensions (SBBR, SBBW) 6.4 inches Lx 4.7 inches W x 4.3 inches D (162 mm Lx 120 mm W x 108 mm D) Low Frequency Sounder with Surface Mount Back Box Dimensions (SBBR, SBBW) 5.7 inches Lx 4.8 inches W x 3 inches D (145 mm Lx 120 mm W 76 mm D) Notes: 1. Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs. 0 UL Cunent Draw Data UL Max. Strobe Current Draw (mA RMS) 8-17.5 Volts 16-33 Volts High Candela Range Candela DC FWR DC FWR 135 NA NA 228 207 150 NA NA 246 220 177 NA NA 281 251 185 NA NA 286 258 8-17.5 Volts 16-33 Volts Sound Pattern dB DC FWR DC FWR Temporal High 191 262 138 166 Continuous High 292 384 138 208 Coded High 292 388 153 205 UL Max. Current Draw DC Input (mA RMS), 2-Wire 16-33 Volts 135 150 Low Frequency 177 Sounder Strobe, 185 High Candela FWR Input Range (135-185 cd) 16-33 Volts 135 150 177 185 Temporal 277 292 325 344 Temporal 296 309 343 351 Continuous 337 362 387 417 Continuous 393 395 432 433 Low Frequency Sounder Tones and Sound Output Data Low Frequency Sounder and Low Frequency Sounder Strobe Output (dBA) 8-17.5 16-33 24-Volt Nominal Volts Volts Reverberant Anechoic - Switch Position Sound Pattern DC FWR DC FWR DC PAIR DC FWR 1 Temporal 76 76 76 76 76 76 86 86 2 Continuous 80 80 - 80 80 80 80 90 90 3t Coded 80 80 80 80 80 80 90 90 Sounder ratings provided are for continuous voltage as provided by the NAC C 0 [4 4.7 in. 6.4 In. I SpectrAlert Advance Dimensions Wall-mount low frequency sounder strobes Wall-mount low frequency sounder SpectrAlert Advance Ordering Information Yodel Wall Low Frequency Sounder Strobes 1'escription P2RH-LF 2-Wire Low Frequency Sounder Strobe, High cd, Red P2WH-LF 2-Wire Low Frequency Sounder Strobe, High Cd, White Low Frequency Sounders HR-LF Low Frequency Sounder, Red (HW.LF) (Low Frequency Sounder, White) Accessories BBS-2 Back Box Skirt, Wall, Red BBSW-2 Back Box Skirt, Wall, White SBBR Surface Mount Back Box, Wall, Red SBBW Surface Mount Back Box, Wall, White TR-HS Trim Ring, Wall, Red TRW-HS Trim Ring, Wall White Notes: High cd refers to strobes that include 135, 150, 177, and 185 candela settings. _' "STEM Ohio Avenue • St. Charles, IL 60174 14Systensw ImS, I cunent proJct matian, thckJdbg 1e tatest version et ft dam sheet. Phone: 800-SENSOR2 • Fax: 630-377-6495 atSitSySte11CW11 www.systemsensor.com AvDS16402 • 1114 S CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7135-1653:0223 Page 1 of I CATEGORY: 7135 —AUDIBLE DEVICES USTEE: System Sensor, Unincorporated Div of Honeywell Intl Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Vladimir Klreyev (630) 762-5025 Fax (630) 377-7245 Email: Vladlmir.klreyev@honeywell.com DESIGN: Models HR-LF and HW-LF horns. Intended for indoor use and suitable for wall or ceiling mount. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 8-17.5 or 16-33 VdcNFWR INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and In a manner acceptable to the authority having Jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as audible devices when used with separately listed compatible fire alarm control units. Units can generate the distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal. *These units can generate a low frequency alarm signal for sleeping areas in accordance with NFPA 72. Refer to manufacturer's Installation Manual for details. S *Rev 07-22-14 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an Independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2016 Listing Expires June 30, 2017 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division SYSTEM SENSOR Indoor Selectable. Output Strobes and Horn Strobes for Ceiling Applications SpectrA lerl@ Advance audible visible notification products are rich with features guaranteed to cut installation times and maximize profits. The SpectrAlert Advance series offers the most versatile and easy-to-use line of horns, strobes, and horn strobes in the industry. With white and red plastic housings, wall and ceiling mounting options, and plain and FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement. Like the entire SpectrAlert Advance product line, ceiling-mount strobes and horn strobes Include a variety of features that increase their application versatility while simplifying Installation. All devices feature a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults. To further simplify installation, SpectrAlert Advance utilizes a universal mounting plate so you can mount them to a wide array of back boxes. With an onboard shorting spring, installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with three volume selections. Features . • Plug-in design with minimal intrusion into the back box Tamper-resistant construction Automatic selection of 12- or 24-volt operation at 15 and 15175 candela Field-selectable candela settings on ceiling units: 15, 15175, 30, 75, 95, 110,115, 135,150, 177, and 185 Horn rated at 88+ dBA at 16 volts Rotary switch for horn tone and three volume selections Universal mounting plate for ceiling units Mounting plate shorting spring feature checks wiring continuity before device installation Electrically Compatible with legacy SpectrAlert devices Compatible with MDL3 sync module Listed for ceiling or wall mounting Agency Listings SIBJIALIIG LISTED APPROVED approved 71251653186 (indoor Sliobes) 7125-16530188 (horn Olfobos. $4011 (domes. horn nirobe.. horn.) 3023572 MEA452-05-E chime Wobes) S5512(suobe,) 71-l6530I89 (horns. chimes) SpectrAlert Advance Specifications Architect/Engineer Specifications General SpectrAlert Advance strobes and horn strobes shall mount to a standard 4 x 4 x 11/24nch back box, 4-inch octagon back box, or double- gang back box. Two-wire products shall also mount to a single-gang 2 x 4 x 17i84nch back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync'Circuif" Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync'Circuit Module, 112-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt4ated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15175, 30, 75, 95, 110, 115, 135, 150, 177, and 185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model ______ listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated tens/reflector system. Horn Strobe Combination The horn strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. On four-wire products, the strobe shall be powered independently of the sounder. The horn on horn strobe models shall operate on a coded or non-coded power supply. Synchronization Module The module shall be a System Sensor Sync.Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn strobe models over a single pair of wires. The module shall mount to a 4 11/16 x 4 11/16 x 2 1/84nch back box. The module shall also control two Style V (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. PhysicaltElectrical Specifications Standard Operating Temperature 32°F to 120°F (0°C to 49°C) Humidity Range 10 to 93% non-condensing Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12 DC/FWR or regulated 24 DCIFWR1 Operating Voltage Rang& 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage Range (MDL3) 8.5 to 17.5V (12 V nominal) or 16.5 to 33 V (24V nominal) InputTermInal Wire Gauge 12 to 18AWG Ceiling-Mount Dimensions (Including lens) 6.8' diameter x 2.5' high (173 mm diameter x 64 mm high) Ceiling-Mount Surface Mount Back Box Skirt Dimensions 6.9° diameter x 3.4' high (175 mm diameter x 86 mm high) (SBBCR, SBBCW) Notes: Full Wave Rectified (RNR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs. P. S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd. AVOS1O1OI VoliKrax-.-STFT,b~,urren Candela 8-17.5 Volts DC FWR 16-33 Volts DC FWR Standard Candela Range 15 123 128 66 71 15/75 142 148 77 81 30 NA NA 94 96 75 NA NA 158 153 95 NA NA 181 176 110 NA NA 202 195 115 NA NA 210 205 High 135 NA NA 228 207 Candela Range 150 NA NA 246 220 177 NA NA 281 251 185 NA NA 286 258 UL Max. Current Draw (mA DC Input RMS). 2-Wire 8-17.5 Volts 15 Horn Strobe, 15175 Standard Candela Range 15 15175 (15-115 30 cd) 75 16-33 Volts 95 110 115 Temporal High 137 147 79 90 107 176 194 212 218 Temporal Medium 132 144 69 80 97 157 182 201 210 Temporal Low 132 143 66 77 93 154 179 198 207 Non-Temporal High 141 152 91 100 116 176 201 221 229 Non-Temporal Medium 133 145 75 85 102 163 187 207 216 Non-Temporal Low 131 144 68 79 96 156 182 201 210 FWR Input Temporal High 136 155 88 97 112 168 190 210 218 Temporal Medium 129 152 76 88 103 160 184 202 206 S Temporal Low 129 151 76 86 101 160 184 194 201 Non-Temporal High 142 161 103 112 126 181 203 221 229 Non-Temporal Medium 134 155 85 95 110 166 189 208 216 Non-Temporal Low UL Max. Current Draw (mA 132 RMS). 2-Wire 16-33 Volts 154 Horn Strobe, 80 High 90 Candela Range 105 (135-185 161 cd) 184 16-33 Volts 202 211 DC Input 135 150 177 185 FWR Input 135 150 177 185 Temporal High 245 259 290 297 Temporal High 215 231 258 265 Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258 Temporal Low 232 251 282 292 Temporal Low 207 221 248 256 Non-Temporal High 255 270 303 309 Non-Temporal High 233 248 275 281 Non-Temporal Medium 242 259 293 299 Non-Temporal Medium 219 232 262 267 Non-Temporal Low 238 254 291 295 Non-Temporal Low 214 229 256 262 Horn Strobe Tones and Sound Output Data horn Strobe Switch Position ~flutput (05A) Sound Pattern dB 8-17.5 Volts DC FWR 16-33 Volts DC FWR 24-Volt Nominal Reverberant DC FWR Anechoic DC FWR 1 Temporal High 78 78 84 84 88 88 99 98 2 Temporal Medium 74 74 80 80 86 86 96 96 3 Temporal Low 71 73 76 76 83 80 94 89 4 Non-Temporal High 82 82 88 88 93 92 100 100 5 Non-Temporal Medium 78 78 85 85 90 90 98 98 6 Non-Temporal Low 75 75 81 81 88 84 96 92 7t Coded High 82 82 88 88 93 92 101 101 8f Coded Medium 78 78 85 85 90 90 97 98 9t Coded Low 75 75 81 81 88 85 96 92 Settings 7, 8, and 9 are not available on 2-wire horn strobes. AVDS 10101 SpectrAlert Advance Dimensions 1 Ceiling-mount horn strobes Ceiling back box surface mount back box SpectrAlert Advance Ordering Information Ceiling Horn Strobes PC2R 2-Wire Horn Strobe, Standard cd, Red PC2R-P 2-Wire Horn Strobe, Standard cd, Red, Plain (no "FIRE") marking PC2RH 2-Wire Horn Strobe, High cd, Red PC2W 2-Wire Horn Strobe, Standard cd, White P02W-P 2-Wire Horn Strobe, Standard cd, White, Plain (no "FIRE) marking PC2W-SP 2-Wire Horn Strobe, Standard cd, White, "Fuego" marking PC2WH 2-Wire Horn Strobe, High cd, White PC2WH-P 2-Wire Horn Strobe, High cd, White, Plain (no "FIRE) marking PC2WH-SP 2-Wire Horn Strobe, High cd, White, "Fuego" PC4R 4-Wire Horn Strobe, Standard cd, Red PC4RH 4-Wire Horn Strobe, High cd, Red PC4W 4-Wire Horn Strobe. Standard cd, White Ceiling Strobes SCR Strobe, Standard cd, Red SCRH Strobe, High cd, Red SCW Strobe, Standard cd, White SCW-P Strobe, Standard cd, White, Plain (no "Fire") marking SCWH Strobe, High cd, White Accessories SBBCR Surface Mount Back Box, Ceiling, Red SBBCW Surface Mount Back Box, Ceiling, White Notes: All -P models have a plain housing (no "FIRE" marking on cover) All -SP models have FUEGO marking on cover "Standard cd" refers to strobes that Include 15, 15/75,30, 75, 95, 110, and 115 candela settings. "High cd" refers to strobes that include 135, 150, 177, and 185 candela settings. T_""i S'g'5TEfjp7 3825 Ohio Avenue • St. Charles, IL 60174 bc sye-oqn 52015 System Saw. 's SENSOR' Phone: 800-SENSOR2 • Fax: 630-377-6495 C1LhI$ data Eheet. AV0S10102 • 0!15 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7125-1653:0186, Page 1 of I CATEGORY: 7125 - FIRE ALARM DEVICES FOR THE HEARING IMPAIRED LISTEE: System Sensor, Unincorporated Div of Honeywell Intl Inc.3825 Ohio Ave, St. Charles, IL 60174 Contact: Vladimir Kireyev (630) 762-5025 Fax (630) 377-7245 Email: VIadimir.KireyevhoneyweIl.com DESIGN: Synchronous type strobe lights, Models SR, SRH, SW, SW-CLR-ALERT, SWH, SCR, SCRH, SCW, SCW-CLR-ALERT and SCWH followed by the suffix -P, -SP, -PG, or none. Intended for Indoor use mounted on the wall or the ceiling. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 8-17.5 or 16-33 VDCIFWR Candela: 15, 15175, 30, 75, 95, 110, 115, *135 *150 *177 *185cd INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating and UL label. APPROVAL: Listed as strobe lights suitable for hearing impaired application when used with separately listed compatible fire alarm control units. Suitable for indoor use, wall or ceiling mounted. Refer to listee's Installation Instruction Manual for details. 'Rev. 03-11-10 fm This listing Is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2016 Listing Expires June 30, 2017, Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division