Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2628 GATEWAY RD; 130; FPC2019-0110; Permit
PERMIT REPORT city of Carlsbad Print Date: 10/15/2021 Permit No: FPC2019-0110 Job Address: 2628 GATEWAY RD, # 130, CARLSBAD, CA 92009 Status: Closed - Finaled Permit Type: FIRE-Construction Commercial Work Class: Fire Sprinklers Parcel #: 2132621900 Track #: Applied: 05/08/2019 Valuation: $112,461.18 Lot #: Issued: 06/11/2019 Occupancy Group: Project #: Finaled Close Out: 11/08/2019 #of Dwelling Units: Plan #: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check #: Inspector: Plan Check #: Final Inspection: Project Title: Description: YOGA SIX -SPRINKLER TI (45 HEADS) Applicant: FPContractor: RJ FIRE PROTECTION RJ FIRE PROTECTION-INACTIVE RITO JASSO 18227 ANDREA ci 18227 ANDREA cr PERRIS, CA 92570-6716 PERRIS, CA 92570-6716 (760) 415-7099 (760) 415-7099 FEE AMOUNT FIRE NFPA 13 or 13R System 7- 100 heads - $553.00 Total Fees: $553.00 Total Payments To Date: $553.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 1 760-602-8561 f I www.carlsbadca.gov Page 1 of 6 The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com DESCRIPTION The Viking Microfast® Quick Response Pendent Sprinkler VK302 is a small ther- mosensitive glass bulb spray sprinkler available with various finishes and tempera- ture ratings to meet design requirements. The special Polyester and Electroless Nickel PTFE (ENT) coatings can be used in decorative applications where colors are desired. In addition, these coatings have been investigated for installation in corrosive environments and are Listed and Approved as indicated in the Approval Charts. LISTINGS AND APPROVALS ceus cULus Listed: Category VNIV FM Approved: Class Series 2000 VdS Approved: Certificates G414009, G414010, G4040095, and 4880045 LPCB Approved: Certificate 096e/06 CE Certified: Standard EN 12259-1, certificate of constancy of performance 0832-CP A117 COP 7;. CCCF Approved: Approved by the China Certification Center for Fire Products (CCCF LM MED Certified: Standard EN 12259-1 EC-certificate of conformity 0832-MED-1003 Refer to Approval Chart 1 and Design Criteria cULus Listinq requirements, and refer to Approval Chart 2 and Design Criteria for FM Approval requirements that must be followed. FPC20I9-0110 TECHNICAL DATA 2628 GATEWAY RD #130 Specifications: YOGA SIX - SPRINKLER TI (45 HEADS) Minimum Operating Pressure: 7 psi (0.5 bar) Rated to 175 psi (12 bar) water working pressure 2132621900 Factory tested hydrostatically to 500 psi (34.5 bar) 5/211'2019 Thread size: 1/2' NPT, 15 mm BSP Nominal K-Factor: 5.6 U.S. (80.6 metric**) Glass-bulb fluid temperature rated to -65 °F (-55 °C) - 01 10 Overall Length: 2-1/4" (58 mm) - *CULUS Listing, FM Approval, and NFPA 13 installs require a minimum of 7 psi (0.5 bar). The minimum operating pressure for LPCB and CE Approvals ONLY is 5 psi (0.35 bar). Material Standards: Frame Casting: Brass UNS-C84400 or QM Brass Deflector: Phosphor Bronze UNS-051000 or Copper UNS-C19500 Bulb: Glass, nominal 3 mm diameter Belleville Spring Sealing Assembly: Nickel Alloy, coated on both sides with PTFE Tape Screw: Brass UNS-C36000 Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-S30400 For Polyester Coated Sprinklers: Belleville Spring-Exposed For ENT Coated Sprinklers: Belleville Spring-Exposed, Screw and Pipcap - ENT plated. Ordering Information: (Also refer to the current Viking price list.) Order Quick Response Pendent Sprinklers by first adding the appropriate suffix for the sprinkler finish and then the appropriate suffix for the temperature rating to the sprinkler base part number. Finish Suffix: Brass = A, Chrome = F, White Polyester = M-/W, Black Polyester = M-/B, and ENT = JN Temperature Suffix: 135°F (57 °C) =A, 155°F (68 °C) = B. 175°F (79 °C) = D, 200°F (93 °C) = E, 286°F (141 °C) = G Form No. F_033314 18.06.21 Rev 18.1 Replaces Form No. F_033314 Rev 17.1 (Updated MED approval; added LPCB certificate number) Page 2of6' 'J II(IF1G®MICROFASTO QUICK l:II[1U.7VA RESPONSE PENDENT SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com For example, sprinkler VK302 with a Brass finish and a 155 OF (68 °C) temperature rating = Part No. 12979AB Available Finishes And Temperature Ratings: Refer to Table 1. Accessories: (Also refer to the current Viking price list.) Sprinkler Wrenches: Standard Wrench: Part No. 10896W/B (available since 2000). Wrench for Recessed Pendent Sprinklers: Part No. 13655W/B** (available since 2006) Optional Protective Sprinkler Cap Remover/Escutcheon Installer Tool*** Part No. 15915 (available since 2010) "A 1/2"ratchet is required (not available from Viking). ***Allows use from the floor by attaching a length of 1" diameter CPVC tubing to the tool. Ideal for sprinkler cabinets. Refer to Bulletin F_051808. Sprinkler Cabinets: Six-head capacity: Part No. 01724A (available since 1971) Twelve-head capacity: Part No. 01725A (available since 1971) INSTALLATION Refer to appropriate NFPA Installation Standards. -- OP 1 ERATI6N. During fire cOrditkns, the heat-sensitive liquid in the glass bulb expands, causing the glass to shatter, releasing the pip cap and sealing spring ajsemI'. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control-the fire. INSPECTIONS1 T&S4ND MAINTENANCE Refer to NFPA 25 for Inspection, Testing and Maintenance requirements. AVAILABILITY The Viking Microfast® Quick Response Pendent Sprinkler VK302 is available through a network of domestic and international dis- tributors. See The Viking Corporation web site for the closest distributor or contact The Viking Corporation. GUARANTEE For details of warranty, refer to Viking's current list price schedule or contact Viking directly. Protective Sprinkler Wrench Flat Clip ft Protective Sprinkler Cap [.i:iei A 1 Figure 1: Standard Sprinkler Wrench 10896W/B Form No. F_033314 18.06.21 Rev 18.1 t Page 3 of 6 41KJW*j MICROFASTO QUICK i:iir.qiu.yiy RESPONSE PENDENT SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com TABLE 1: AVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES Sprinkler Temperature Sprinkler Nominal Maximum Ambient Classification Temperature Rating' Ceiling Temperature -Bulb C Color Ordinary 135 OF (57 °C) 100 OF (38 °C) Orange Ordinary 155 OF (68 °C) 100 OF (38 °C) Red Intermediate 175 OF (79 °C) 150 OF (65 °C) Yellow Intermediate 200 OF (93 °C) 150 OF (65 °C) Green High 286 OF (141 °C) 225 OF (107 °C) Blue Sprinkler Finishes: Brass, Chrome, White Polyester, Black Polyester, and ENT Corrosion-Resistant Coatings3: White Polyester, and Black Polyester. ENT in all temperature ratings except 135 OF (57 °C) Footnotes I The sprinkler temperature rating is stamped on the deflector. 2 Based on NFPA-13. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the Authority Having Jurisdiction. Refer to specific installation standards. The corrosion-resistant coatings have passed the standard corrosion test required by the approving agencies indicated in the Approval Charts. These tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are com- patible with or suitable for the proposed environment. For automatic sprinklers, the coatings indicated are applied to the exposed exterior surfaces only. Note that the spring is exposed on sprinklers with Polyester and ENT coatings. For ENT coated automatic sprinklers, the waterway is coated. j ._-i ,. sprinklers Sprinkler wrench 13655W/B** for recessed pendent A 1/2 ratchet is required (not available from Viking) Carefully slide the wrench sideways around the protective cap, ensuring engagement with the sprinkler wrench flats Figure 2: Wrench 13655W/B for Recessed Pendent Sprinklers Form No. F_033314 18.06.21 Rev 18.1 Page 4 of 6 NJJQ F MICROFAST QUICK RESPONSE PENDENT SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs©vikingcorp.com Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com Approval Chart I (UL) The VikrncrofastQuickReaponse KEY PGndaM Spmk1er.çK2 AX4ep Maxirnui7PSt(42Ba)WWP Base Sprinkler Thread Size Nominal Overall Listings and Approvals3 Part SIN Style K-Factor Length (Refer also to Design Criteria.) Number1 NPT BSP U.S. metric2 Inches mm cULus4 VdS VK302 Pendent 1/2" 15mm 5.6 80.6 2-1/4 58 A1Z, B1Y, 02, C2X Al A1Z, B1Y Pendent 1/2" - 5.6 80.6 2-1/4 01W VK302 58 -- - LPCBn—C ly - - 03 VK302 Pendent -- 15m 6 2-1/4 58 -- - -- - 03 - uct Below - Limited A vai6bihiw (Conbct Local Vikina 6#ice) 06662B VK302 Pendent 1/2" 15 mm 1 5.6 1 80.6 2-1/4 58 A1Z, B1Y, 02, C2X -• - -- - - 18021 VK302 Pendent 1/2" 15 mm 56 80.6 2-1/4 58 A1X, B1Y Al AIX, B1Y D1X, C1YT 01W - Approved Temperature Ratings Approved Finishes Approved Escutcheons A- 135 °F (57 "C), 155 °F (68 °C), 175 °F 1 - Brass, Chrome, White W - Recessed with the Model F-i Adjustable Escutcheon only (79 °C), 200 °F (93 °C), 286 °F (141 °C) Polyester86, Black Polyes- X - Standard surface-mounted escutcheon or the B - 135 ¶ (57 °C), 155 °F (68 °C), 175 "F ter56 Viking Micromatic Model E-1 Recessed Escutcheon (79 °C), and 200 °F (93 "C) 2 - ENT5 Y - Standard surface-mounted escutcheon or the C - 155 "F (68 °C), 175 "F (79 "C), and 3-Chrome Viking Microfast Model F-i Adjustable Escutcheon, or recessed with the Viking Micro- 200 °F (93 °C) mati& Model E-i, E-2, or E-3 Recessed Escutcheon 0 - 155 °F (68 "C), 175 °F (79 "C), 200 °F Z - Standard surface-mounted escutcheon or the (93 °C), 286 °F (141 "C) Viking Microfast® Model F-i Adjustable Escutcheon Footnotes Base part number shown. For complete part number, refer to Viking's current price schedule. 2 Metric K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. This table shows the listings and approvals available at the time of printing. Other approvals may be in process. Listed by Underwriters Laboratories Inc. for use in the U.S. and Canada. cULus Listed as corrosion-resistant. 8 Other colors are available on request with the same Listings and Approvals as the standard colors. CE Certified, Standard EN 12259-1, EC-certificate of constancy of performance 0832-CPR-S0021. 8 MED Certified, Standard EN 12259-1, EC-0832-MED-1003. DESIGN CRJTERIA.UL (Also refer t0Appcova1 C1Wt 1 above) cULus Listing Reguirements: The Viking Microfast® Quick Response Pendent Sprinkler VK302 is cULus Listed as indicated in the Approval Chart for installation in accordance with the latest edition of NFPA 13 for standard spray sprinklers. Designed for use in Light and Ordinary occupancies. The sprinkler installation rules contained in NFPA 13 for standard spray pendent sprinklers must be followed. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to Form No. F_080614 for general care, installation, and maintenance information. Viking sprinklers are to be installed in accordance with the latest edition of Viking technical data, the appropriate standards of NFPA, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. Form No. F_033314 18.06.21 Rev 18.1 Page 5 of 6 sI KJI1Gi® MICROFAST® QUICK l:II[iu,yyu RESPONSE PENDENT SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945.9501 Technical Services: 877-384-5464 Fax: 269.818-1680 Email: techsvcsvikingcorp.com Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com Approval Chart 2 (FM) Temperature yy The Viking Microfast® Quick Response Finish Pendent Sprinkler VK302 A1X4- Escutcheon (if applicable) Maximum 175 PSI (12 Bar) WWP Base Part Sprinkler Thread Size Nominal K-Factor Overall Length FM Approvals' Number' SIN Style (Refer also to Design Criteria.) NPT BSP U.S. metric2 Inches mm 12979 VK302 Pendent 1/2" 15 mm 5.6 80.6 2-1/4 58 A1Z, 131Y, D2X, C2 7y ,nzv yyiirj.j 06662B VK302 Pendent 1/2" 15 mm 5.6 80.6 2-1/4 58 A1Z, B1Y, D2X, C2 18021 VK302 Pendent 1/2" 15 mm 5.6 80.6 2-1/4 58 A1Z, B1Y Approved Escutcheons Approved Temperature Ratings X - Standard surface-mounted escutcheon or the A - 135 °F (57 "C), 155 °F (68 °C), 175 °F (79 °C), 200 °F Viking Micromatic® Model E-1 Recessed (93 °C), 286 °F (141 C) Approved Finishes Escutcheon B - 135 °F (57 °C), 155 °F (68 °C), 175 ¶ (79 °C), and 1 - Brass, Chrome, White Polyester", Y - Standard surface-mounted escutcheon or the 200 °F (93 °C) and Black Polyester4 Viking Microfast® Model F-I Adjustable Escutcheon, C - 155 °F (68 "C), 175 °F (79 "C), 200 "F (93 °C), 286 2 - ENT5 or recessed with the Viking Micromatic® Model E-1 °F (141 °C) or E-2 Recessed Escutcheon D - 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C) Z - Standard surface-mounted escutcheon or the Viking Microfast® Model F-I Adjustable Escutcheon Footnotes I Base part number shown. For complete part number, refer to Viking's current price schedule. 2 Metric K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. This table shows the FM Approvals available at the time of printing. Other approvals may be in process. "Other colors are available on request with the same Approvals as the standard colors. FM approved as corrosion proofing for corrosive environments. DESIGN CRITERIA- FM (Also refer to Approval Chart 2 above.) FM Anoroval Requirements: The Viking Microfast® Quick Response Pendent Sprinkler VK302 is FM Approved as quick response Non-storage pendent sprinklers as indicated in the FM Approval Guide. For specific application and installation requirements, reference the latest applicable FM Loss Prevention Data Sheets (including Data Sheet 2-0). FM Global Loss Prevention Data Sheets contain guidelines relating to, but not limited to: minimum water supply requirements, hydraulic design, ceiling slope and obstructions, minimum and maximum allowable spacing, and deflector distance below the ceiling. NOTE: The FM installation guidelines may differ from cULus and/or NFPA criteria. IMPORTANT: Always refer to Bulletin Form No. F 091699 - Care and Handling of Sprinklers. Also refer to Form No. F_080614 for general care, installation, and maintenance information. Viking sprinklers are to be installed in accordance with the latest edition of Viking technical data, the appropriate standards of NFPA, FM Global, LPCB, APSAD, VdS or other similar organiza- tions, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. Form No. F_033314 18.06.21 Rev 18.1 Page 6 of 6 ® MICROFAST® QUICK l.1:IIE'YM RESPONSE PENDENT N41KJW*j SPRINKLER VK302 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs©vikingcorp.com Visit the Viking website for the latest edition of this technical data page: www.vikinggroupinc.com 1/2" (15 mm) NPT 2-1/4" (57 fliT Installed with a standard 1/8" surface-mounted escutcheon L, Ceiling Opening Size: 2-5/16" (59 mm) minimum 2-1/2" (64 mm) maximum (54 mm) 4- 1-1/2" 2" j (38 mm) (51 mm) Mm. Max. Installed with a Microfast Note: At maximum, adapter Model F-I Adjustable Escutcheon is exposed 1/2" (13 mm) from face of ceiling Figure 3: Sprinkler Dimensions with a Standard Escutcheon and the Model F-I Adjustable Escutcheon 2-I/8"..,, -. •, (54 mm) 1-3/4" (45 mm) - Max. Ceiling Opening Size: 2-5/16" (59 mm) minimum 2-1/2" (64 mm) maximum 1-1/8" ir ,, (29 mm) 1-1/8" (29 mm) Mm. Installed with a Installed with a Model Model E-1 Recessed E-2 Thread-on Recessed Escutcheon Escutcheon Figure 4: Sprinkler Dimensions with the Model E-I and E-2 Recessed Escutcheons Form No. F_033314 18.06.21 Rev 18.1 Replaces Form No. F_033314 Rev 17.1 (Updated MED approval; added LPCB certificate number) Page 1 of 4 MICROFAST® QUICK +,j IIIFs1G® I:II[u.7..IL RESPONSE UPRIGHT SPRINKLER VK300 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com DESCRIPTION The Viking Microfast® Quick Response Upright Sprinkler VK300 is a small, thermosensitive, glass-bulb spray sprinkler available in several differ- ent finishes and temperature ratings to meet design requirements. The spe- cial Polyester and Electroless Nickel PTFE (ENT) coatings can be used in decorative applications where colors are desired. In addition, these coat- ings have been investigated for installation in corrosive atmospheres and are listed/approved as corrosion resistant as indicated in the Approval Charts. (Note: FM global approves the ENT coating as corrosion resistant. FM Global has no approval classification Polyester coatings as corrosion resistant.) LISTINGS AND APPROVALS cULus Listed: Category VNIV FM Approved: Classes 2002 and 2020 Refer to Approval Chart I and Design Criteria on for cULus Listing requirements and refer to Approval Chart 2 and Design Criteria FM Approval requirements that must be followed. 3. TECHNICAL DATA Specifications: Minimum Operating Pressure: 7 psi (0.5 bar)* Maximum Working Pressure: 175 psi (12 bar) wwp. Factory tested hydrostatically to 500 psi (34.5 bar) Testing: U.S.A. Patent No. 4,831,870 Thread size: 1/2" NPT, 15 mm BSP Nominal K-Factor: 5.6 U.S. (80.6 metric**) Glass-bulb fluid temperature rated to -65 °F (-55 °C) Overall Length: 2-3/16" (56 mm) *cULus Listing, FM Approval, and NFPA 13 installs require a minimum of 7 psi (0.5 bar). The minimum operating pressure for LPCB and CE Approvals ONLY is 5 psi (0.35 bar). Material Standards: Frame Casting: Brass UNS-C84400 or QM Brass Viking Technical Data may be found on Deflector: Brass UNS-C23000 or Copper UNS-C19500 The Viking Corporation's Web site at Bulb: Glass, nominal 3 mm diameter http://www.vikinggroupinc.com. Belleville Spring Sealing Assembly: Nickel Alloy, coated on both sides with The Web site may include a more recent PTFE Tape dt of Technical D t P Screw: Brass UNS-C36000 edition o this Data age. Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS- S30400 For Polyester Coated Sprinklers: Belleville Spring-Exposed For ENT Coated Sprinklers: Belleville Spring-Exposed, Screw and Pipcap - ENT plated Ordering Information: (Also refer to the current Viking price list.) Order Viking Microfast® Quick Response Upright Sprinkler VK300 by first adding the appropriate suffix for the sprinkler finish and then the appropriate suffix for the temperature rating to the sprinkler base part number. Finish Suffix: Brass = A, Chrome = F, White Polyester = M-/W, Black Polyester = M-/B, and ENT = JN Temperature Suffix (°F/°C): 135°/57° =A, 155°/68° = B, 1750/79° = D, 2000/93° = E, and 286°/141° = G For example, sprinkler VK300 with a 1/2" NPT thread, Brass finish and a 155 °F/68 °C temperature rating = Part No. 12978AB Available Finishes And Temperature Ratings: Refer to Table 1. Accessories: (Also refer to the "Sprinkler Accessories" section of the Viking data book.) Sprinkler Wrench: Standard Wrench: Part No. 10896W/B (available since 2000) Sprinkler Cabinets: Six-head capacity: Part No. 01724A (available since 1971) Twelve-head capacity: Part No. 01725A (available since 1971) 4. INSTALLATION Refer to appropriate NFPA Installation Standards. Form No. F_052114 Rev 15.2 Page 2 of 4 The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs©vikingcorp.com OPERATION During fire conditions, the heat-sensitive liquid in the glass bulb expands, causing the glass to shatter, releasing the pip cap and sealing spring assembly. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control the fire. INSPECTIONS, TESTS AND MAINTENANCE Refer to NFPA 25 for Inspection, Testing and Maintenance requirements. AVAILABILITY The Viking Microfast® Quick Response Upright Sprinkler VK300 is available through a network of domestic and international distributors. See The Viking Corporation web site for the closest distributor or contact The Viking Corporation. GUARANTEE For details of warranty, refer to Viking's current list price schedule or contact Viking directly. f:1IAAVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES Sprinkler Temperature Sprinkler Nominal Maximum Ambient Bulb Color Classification Temperature Rating' - Ceiling Temperature 2 Ordinary 135 F (57 °C) 100 0F (38 °C) Orange Ordinary 155 °F (68 0C) 100 ¶ (38 0C) Red Intermediate 175 °F (79 °C) 150 0F (65 °C) Yellow Intermediate 200 °F (93 0C) 150 °F (65 °C) Green High 286 °F (141 °C) 225 °F (107 00) Blue Sprinkler Finishes: Brass, Chrome, White Polyester, Black Polyester, and ENT Corrosion-Resistant Coatings': White Polyester, Black Polyester, and Black PTFE. ENT in all temperature ratings except 135 °F (57 00) Footnotes 1 The sprinkler temperature rating is stamped on the deflector. 2 Based on NFPA-1 3. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the Authority Having Jurisdiction. Refer to specific installation standards. The corrosion-resistant coatings have passed the standard corrosion test required by the approving agencies indicated in the Approval Charts. These tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are compat- ible with or suitable for the proposed environment. For automatic sprinklers, the coatings indicated are applied to the exposed exterior surfaces only. Note that the spring is exposed or, sprinklers with Polyester, ENT, and PTFE coatings. For ENT coated automatic sprinklers, the waterway is coated. Protective Sprinkler Cap ------.. Wrench Flat Figure 1: Standard Sprinkler Wrench 10896W/B Form No. F_052114 Rev 15.2 Page 3 of 4 MICROFASP QUICK II(IIS1Gi l:III.q.1u.yM RESPONSE UPRIGHT SPRINKLER VK300 (K5.6) The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Approval Chart I (UL) Temperature KEY Microfast® Quick Response Finish Al X4- Escutcheon (it applicable) Upright Sprinkler VK300 Maximum 175 PSI (12 bar) WWP Base Part Thread Size Nominal K-Factor Overall Length Listings and Approvals3 SIN Number' NPT BSP U.S. metric? Inches mm cULus VdS LPCB NYC° CE 12978 VK300 1/2" 15 mm 5.6 80.6 2-3/16 56 Al, B2 -- -- See footnote 7. -- 06661B VK300 1 1/2" 1 15 mm 1 5.6 80.6 2-3/16 56 Al, B2 -- -- See footnote 7.1 -- Approved Temperature Ratings Approved Finishes A- 135 °F (57 °C), 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C), and 286 -F I1Al0(\ 1 - Brass, Chrome, White Polyester56 , and Black Polyester5'6 B - 155 °F (68 °C), 175 °F (79 °C), 200 °F (93 °C), and 286 °F (141°C) 2-ENT6 Footnotes 'Base part number is shown. For complete part number, refer to Vikings current price schedule. 2Metric K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. 'This table shows the listings and approvals available at the time of printing. Check with the manufacturer for any additional approvals. Listed by Underwriters Laboratories Inc. for us in the U.S. and Canada Other colors are available on request with the same Listings and Approvals as the standard colors. 6 cULus Listed as corrosion resistant. ° Meets New York City requirements, effective July 1, 2008 8 Accepted for use, City of New York Board of Standards and Appeals, Calendar Number 219-76-SA and City of New York Department of Buildings, MEA 89-92-E, Vol. 16. DESIGN CRITERIA -UL (Also refer to Approval Chart 1 above.) cULus Listing Requirements: The Viking Microfast® Quick Response Upright Sprinkler VK300 is cULus Listed as indicated in Approval Chart 1 for installation in accordance with the latest edition of NFPA 13 for standard spray sprinklers. Designed for use in Light and Ordinary Hazard occupancies. The sprinkler installation rules contained in NFPA 13 for standard spray upright sprinklers must be followed. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to page QRI-3 for general care, installation, and maintenance information. Viking sprinklers are to be installed in ac- cordance with the latest edition of Viking technical data, the appropriate standards of NFPA, FM Global, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. Form No. F_052114 Rev 15.2 Page 4 of 4 MICROFAST® QUICK 'sJ I 1(1 FIG SPRINKLER VK300 (K5.6) RESPONSE UPRIGHT The Viking Corporation, 210 N Industrial Park Drive, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com Approval Chart 2 (FM) M4crofast° Quick Rospoiise Upright Sprinklor VK3O) Maximtim 175 PSI (12 bar) Ww Base Part Thread Size Nominal K-Factor Overall Length FM Approvals3 Number' SIN (Refer also to Design Criteria below.) NPT BSP U.S. I metric2 Inches mm 12978 VK300 1/2' 15 mm 5.6 1 80.6 2-3/16 56 Al, B2 f•)fl 7 N 7(TI ITh I•Ji 06661B VK300 1/2" 15mm 1 5.6 J 80.6 2-3/16 56 Al,B2 Approved Temperature Ratings Approved Finishes A- 135°F (57 °C), 155°F (68 °C), 175°F (79 °C), 200°F (93 °C), and 286°F (141°C) 1 White Polyester5, and Black B - 155 "F (68 °C), 175 °F (79 °C), 200 °F (93 °C), and 286 °F (141°C) 2 - ENT Footnotes Base part number is shown. For complete part number, refer to Viking's current price schedule. 2Methc K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. 3This table shows the FM Approvals available at the time of printing. Check with the manufacturer for any additional approvals. Other colors are available on request with the same Approvals as the standard colors. 6 FM approved as corrosion resistant. DESIGN CRITgRIA-FM (Also refer to,.pprova1 Ct&t 2. above) FM AnDroval Requirements: The Microfast Quick Response Upright Sprinkler VK300 is FM Approved as a quick response Non-Storage upright sprinkler as indicated in the FM Approval Guide. For specific application and installation requirements, reference the latest applicable FM Loss Prevention Data Sheets (including Data Sheet 2-0). FM Global Loss Prevention Data Sheets contain guidelines relating to, but not limited to: minimum water supply requirements, hydraulic design, ceiling slope and obstructions, minimum and maximum allowable spacing, and deflector distance below the ceiling. NOTE: The FM installation guidelines may differ from cULus and/or NFPA criteria. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to page QRI-3 for general care, installation, and maintenance information. Viking sprinklers are to be installed in ac- cordance with the latest edition of Viking technical data, the appropriate standards of NFPA, FM Global, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. Form No. F_052114 Rev 15.2 DynawThread — ABFII Submittal Data Sheet > Full Line Sch-40 Replacement Dyna-Thread - ABFII sprinkler pipe represents an engineering advancement for the sprinkler pipe industry. It combines the safety and longevity of traditional Sch-40 pipe with quality and superior hydraulic advantages. > Comparison to Schedule 40 Dyna-Thread —ABFlls inside diameter is up to 3.6% larger than Sch-40 giving it superior hydraulics. Also, when used in combination with Dyna-Flow pipe, down sizing often occurs. Dyna-Thread —ABFII is fully listed and approved UL, ULC, and FM for fire sprinkler applications. The life expectancy of Dyna-Thread -ABFII and Sch-40 are equal based on the calculated wall thicknesses per UL. The consistent quality of steel used to make Dyna-Thread —ABFII facilitates smooth threading and lower maintenance costs. The exterior of Dyna-Thread —ABFII is protected by a clean, durable mill coating for extended shelf life and easy paint application. With its increased strength and lighter weight, Dyna-Thread —ABFlI reduces installation fatigue and is ideal for retro-fit applications. Corrosion Resistance Ratio (CRR) is a UL (Underwriters Laboratory) term for the estimated life expectancy of a pipe joint. This is based on the calculated wall thickness at the base of the first exposed thread, assumed to be the weakest point of the pipe length. Dyna-Thread —ABFll and Sch-40 have the same calculated wall thicknesses at this point and are both assigned the same CRR of 1.00. Comparison to L.W.T. Pipe More wall thickness at the thread (CRR= 1.00) gives Dyna-Thread —ABFII better life expectancy than lightwall threadable pipe joints. Dyna-Thread —ABFII is approved for standard hanger spacing (15 ft. O.C.), can be used as earthquake sway bracing, and is safe to use as drops. Dyna-Thread - ABFII is safer to weld on than many zinc coated lightwall threadable pipe products. Dyna-Thread —ABFII is more widely accepted than lightwall threadable where Sch-40 is specified. American Made Able to meet "Buy American" requirements, and is available through distributors in the USA, Canada, Mexico and Latin America. > Specifications & Approvals Dyna-Thread —ABFIl pipe is manufactured to meet: ASTM A 135, Type E Grade A, and is in compliance with NFPA-1 3. All sizes of Dyna-Thread —ABFII are rated at 300 psi working pressure. Dyna-Thread —ABFII is UL and ULC Listed for wet, dry and pre-action sprinkler systems and FM Approved for use in wet systems. Dyna-Thread —ABFII can be "hot-dip" galvanized* to meet FM requirement for dry systems. Dyna-Thread - ABFII is approved for all threaded couplings and welded outlets and is suitable for all roll-grooved, and plain-end fittings. (See listing information). The internal surface of all black Fire Sprinkler pipe up to 4.5000" in diameter shall be coated with Allied Tube & Conduit Antibacterial Formula "ABF". NPS Nominal I.D. ABFIII ABFII Specifications Wt. Wt. (H20 Filled) LbsIFt kg/rn LbslFt; kg/rn CRR CRR In; mm In; mm Unthreaded Threaded 1" 1.080 1.330 1.75 11.39 1.00 25 27.4 2.0 2.60 - - 11/4 1.408 1.870 2.54 9.50 1.00 32 35.8 2.8 3.78 - - 11/2 1.639 2.290 3.22 9.14 1.00 40 41.6 3.4 4.79 - - 2 2.104 3.050 4.57 8.41 1.00 50 53.4 1 4.5 6.80 - - 0 Co <~> APPROVED * Must be ordered in 10 bundle increments. Project: Sprinkler Contractor: Date: Engineer: Specification Reference: System Type: Locations: Comments: Customer Service (800) 882-5543 Fax: (800) 659-7730 www.alliedtube-sprinkler.com 9'~ Cl I he d . 16100 S Lathrop Ave. • 11350 Norcom Rd. • 2525 N 27th Ave. • 600 Dean Sievers Place TUBE & CONDUIT Harvey, IL 60426 Philadelphia, PA 19154 Phoenix, AZ 85009 Morrisville, PA 19067 - """" 02011 Atkore International, Inc. All Rights Reserved. STP-S3-4-1105 NO. 20 TEE NO. 10 ELBOW ALTERNATE STYLES Victaulic offers a broad line of fittings in sizes through 60/1500mm in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile iron to precise tolerances. Victaulic standard fittings pressure ratings conform to the ratings of Victaulic Style 77 couplings. All fittings are supplied with grooves to permit fast installation without field preparation. The grooved design permits flexibility for easy alignment. These fittings are not intended for use with Victaulic couplings for plain end pipe (refer to Section 14.04 for fittings available for plain end applications). Fittings are provided in various materials including ductile iron, steel or segmentally welded steel depending on styles and size. Fittings are painted orange enamel with a galvanized finish available as an option, contact Victaulic for details. Victaulic fittings are designed specifically for use in grooved piping systems. Fittings are provided grooved conforming to standard steel pipe outside diameters. When connecting wafer or lug-type butterfly valves directly to Victaulic fittings with 741 or 743 VicFlangee adapters, check disc clearance dimensions with I.D. dimension of fitting. Note: The following Victaulic fittings are VdS approved: No.1090" Elbow, No. 11 45" Elbow, No.20 Tee and No.60 Cap. Note: The following Victaulic fittings are LPCB approved: No.1090" Elbow, No.11 45" Elbow, No.12 22½" Elbow, No.13 11¼" Elbow, No.30 45" Lateral, No.30-R Reducing Lateral, No.100 Long Radius Elbow, No. 110 Long Radius Elbow, No.20 Tee, No.35 Cross, No.60 Cap, No.25 Reducing Tee, No.33 True Wye, No.50 Concentric Reducer, No.51 Eccentric Reducer and No.29M Tee with Threaded Branch. Advanced Groove System - For 14— 60/350 - 1500mm piping systems, Victaulic now offers the Advanced Groove System (AGS). Refer to Section 20.05 for AGS fitting details. Stainless Steel - Grooved end fittings are available in Schedule 10 Type 316 stainless steel (Schedule 5, 40 and Type 304 available as an option) in various sizes. Fitting center-to-end dimensions will vary depending upon type and schedule. Refer to Section 17.04 and 17.16 for details. Aluminum - Grooved end fittings are available in aluminum alloy 356 T6, in sizes from 1 - 8/25 - 200mm. Refer to Section 21.03 or contact Victaulic for details. Fabricated Steel - A full range of fabricated segemtnally welded steel or full flow grooved end fittings are available refer to section 07.04. Fabricated Steel with AGS Vic-Rings - A full range of full flow fabricated fittings with Vic-Rings are also available. AGS - ADVANCED GROOVE SYSTEM Extra Heavy EndSeal® "ES" Fittings - EndSeal fittings are available in 2— 12'/50 — 300 mm for use with "ES" grooved pipe and HP-70ES EndSeal couplings. "ES" fittings are painted black for easy identification. EndSeal (and standard) fittings may be easily internally coated (by others) for severe service requirements. Always specify "ES EndSeal fittings" when ordering. See Section 07.03 for information on EndSeal fittings. Fittings Machined for Rubber or Urethane Lining (MRL) - For severe abrasive services, Victaulic fittings may be rubber or urethane lined (by others). Lining may be inside diameter/end (abrasion resistance) or wrap-around (corrosion and/or abrasion) machined. Refer to Section 25.03 or contact Victaulic for specific details. Note: Fittings are available with a variety of coatings upon request such as hot dip galvanized, epoxy, glass lined and others. JOB/OWNER CONTRACTOR ENGINEER System No. Submitted By Spec Sect- Para Location Date Approved Date www.victaulic.com VIcTAuLIC IS A REGISTERED TRADEMARK OF vlcrAuuc COMPANY. 0 2012 vIcTAuLIc COMPANY. ALL RIGHTS RESERVED. REVR \4taulic 07.011 CARBON STEEL PIPE -GROOVED FITTINGS 07.01 Grooved End Fittings MATERIAL SPECIFICATIONS Fitting: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request. Or: Segmentally welded steel as shown under nipples Nipples: (adapter, swaged & hose) 3/4 — 4720 — 100 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type F 5— 6/125 - 150mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type E or S, Gr. B 8— 127200-300 mm: Carbon steel, Schedule 30 or 40, conforming to ASTM A-53, Type E or S, Gr. B Flanged Adapter Nipples: (Nipple - see above) Class 125 Flange: Cast iron conforming to ANSI B-16.1 Class 150 Flange: Carbon steel conforming to ANSI 8-16.5, raised or flat face Class 300 Flange: Carbon steel conforming to ANSI 8-16.5, raised or flat face Fitting Coatings: Orange enamel Optional: Hot dip galvanized and others. Some fittings supplied electroplated as standard —see product specifications. Flanged Adapter Nipple Coating: None (Unfinished) Optional: Orange enamel, hot dip galvanized and others. www.victaulic.com 14 J_ic_tauijct vlClAuLlc IS A REGISTERED TRADEMARK OF vlcTAuuc COMPANY. 02012 vicTAuLic COMPANY. ALL RIGHTS RESERVED. 07.012 REVR CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings The chart expresses the frictional resistance of various Victaulic fittings as equivalent feet of straight pipe. Fittings not listed can be estimated from the data given, for example, a 221h° elbow is approximately one-half the resistance of a 450 elbow. Values of mid-sizes can be interpolated. u1u.vm.ior.niflRT1flfl 77-1 Gm EM ILI= M_X U&I Ur M 2t, u TEJ F 1 1.315 1.7 0.8 4.2 1.7 25 33.7 0.5 - 0.2 - 1.3 0.5 2 2.375 3.5 2.5 1.8 1.1 8.5 3.5 50 60.3 1.1 0.8 0.5 0.3 2.6 1.1 76.1 mm 3.000 4.3 2.1 10.8 4.3 76.1 1.3 - 0.7 3.3 1.3 3 3.500 5.0 3.8 2.6 1.6 13.0 5.0 80 88.9 - 1.5 1.2 0.8 0.5 4.0 15 108.0 mm 4.250 6.4 3.2 15.3 6.4 108.0 2.0 0.9 - 4.7 2.0 4 4.500 6.8 1 5.0 3.4 2.1 16.0 6.8 100 114.3 2.1 1.5 1.0 0.6 4.9 2.1 133.0 mm 5.250 8.1 1 4.1 20.0 8.1 133.0 25 1.2 - 6.2 2.5 139.7 mm 5.500 8.5 4.2 21.0 8.5 139.7 2.6 - 1.3 - 6.4 2.6 5 5.563 8.5 4.2 21.0 8.5 125 141.3 2.6 1.3 6.4 2.6 159.0 mm 6.250 1 9.4 4.9 25.0 9.6 159.0 2.9 - 1.5 - 7.6 2.9 165.1 mm 6.500 9.6 5.0 25.0 10.0 165.1 2.9 - 1.5 - 7.6 3.0 6 6.625 10.0 7.5 5.0 3.0 25.0 10.0 150 168.3 3.0 2.3 15 0.9 7.6 3.0 8 8.625 13.0 9.8 6.5 4.0 33.0 13.0 200 219.1 4.0 3.0 2.0 1.2 10.1 4.0 10 10.750 17.0 1 12.0 8.3 5.0 41.0 17.0 250 273.0 5.2 j 3.7 I 2.5 1.5 12.5 5.2 12 12.750 20.0 14.5 1 10.0 6.0 50.0 20.0 300 323.9 6.1 4.4 3.0 1.8 15.2 6.1 14 14.000 24.5 § 1 15.8 18.5 § 11.0 70.0 23.0 350 355.6 75 4.8 5.6 3.4 21.3 7.0 16 16.000 28.05 18.0 21.05 13.0 80.0 27.0 400 406.4 8.5 55 6.4 4.0 24.4 8.2 18 18.000 31.0 § 20.0 23.5 § 14.0 90.0 30.0 450 457.0 9.5 6.1 7.2 4.3 27.4 9.1 20 20.000 34.0 § 225 255 § 16.0 100.0 33.0 800 508.0 10.4 6.9 - 7.8 4.9 305 10.1 24 24.000 42.05 I 27.0 29.5 § 1 19.0 1 120.0 40.0 600 610.0 12.8 J 8.2 j 9.0 5.8 36.6 12.2 Fittings available up to 6011500 mm. Contact Victaulic for details. S Contact Victaulic for details. S For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. § Fitting flow data for 14-247350-600 mm size No. 10 and No. ii Elbows is based on fittings for Style 07 and 77 couplings. For flow data on AGS fittings (No. W10 and No. Wi 1 Elbows), refer to submittal 20.05. Note: All fittings are ductile iron unless otherwise noted with an "sw' or s. 5= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.Com vICTAuLIC IS A REGISTERED TRADEMARK OF VICTAULIc COMPANY. 0 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_R J'tauIic 07.O1_3 FLOW DATA (Frictional Resistance) CARBON STEEL PIPE - GROOVED FITTINGS 07.01' Grooved End Fittings DIMENSIONS .. . Elbows NO. 10 90" Elbow NO. 1145" Elbow NO. 12 221h" Elbow j EtE NO. 13 111/4" Elbow NO. 100 90" Long Radius NO. 110 45" Long Radius r C to E. NO. 12 GSNK '- to E NO. 10 NO. 11 NO. 12 C toE CtoE NO. 13 NO. 100 NO. 110 90' Elbow 45" Elbow t I *Mm 02111 V4 1.050 2.25 0.5 1.50 0.5 1.635w 1.385w 2.505w 0.4 1.81 sw 0.3 20 26.9 57 0.2 38 0.2 41 - 35 - 64 0.2 46 0.1 1 1.315 2.25 0.6 1.75 0.6 3.25 0.6 1.385w 0.3 2.885w 0.6 2.255w 0.5 25 33.7 57 0.3 , 44 0.3 83 0.3 35 0.1 73 0.3 57 0.2 114 1.660 2.75 1.0 1.75 0.9 1.75 0.8 1.385w 0.5 3.255w 1.1 2385w 0.7 32 42.4 70 0.5 44 0.4 44 0.4 35 0.2 83 0.5 60 0.3 1½ 1.900 2.75 1.2 1.75 0.9 1.75 0.8 1385w 0.5 3.635w 2.2 2.505w 1.3 40 48.3 70 0.5 44 0.4 44 0.4 35 0.2 92 1.0 64 0.6 2 2.375 3.25 1.8 2.00 1.3 3.75 @ 1.4 1.38 1.0 4.38 2.5 2.75 1.8 50 60.3 83 0.8 51 . 0.6 95 0.6 35 0.5 111 1.1 70 0.8 2½ 2.875 3.75 3.2 2.25 2.2 4.00 @t 2.3 1.50 1.1 5.13 3.4 3.00 2.8 65 73.0 95 1.5 57 1.0 1 102 1.0 38 0.5 130 1.5 76 1.3 761 mm 3.000 3.75 3.7 2.25 3.4 2.24 1.50 76.1 95 1.7 57 1.5 57 - 38 - - - 3 3.500 4.25 4.5 2.50 3.1 4.50@ 3.1 . 1.50 ' 2.1 5.88 6.0 338 4.9 80 88.9 108 2.0 64 1.4 114 1.4 38 1.0 149 2.7 86 2.2 3½ 4.000 4.50 5.6 2.75 4.3 2.505w 4.0 1.755w 2.7 90 101.6 114 2.5 70 2.0 64 1.8 44 1.2 - - - - 4 4.500 5.00 7.1 3.00 5.6 2.88 5.6 1.75 3.6 7.50 123 4.00 7.3 100 114.3 127 . 3.2 76 25 . 73 2.5 44 1.6 191 5.6 102 3.3 108.0 MM 4.250 5.00 11.0 3.00 5.6 108.0 127 5.0 76 2.5 - - - - - - - 4½ 5.000 5.25 sw 10.0 3.13 sw 6.0 3.505w 6.6 1.88sw 4.2 120 127.0 133 4.5 79 2.7 89 3.0 48 1.9 - - - - 5 5.563 5.50 11.7 3.25 8.3 2.885w 7.8 2.00sw 5.0 9.255w 18.2 4.885w 14.8 125 141.3 140 5.3 83 3.8 73 , 3.5 51 2.2 235 8.3 124 6.7 1330 mm 5.250 5.50 ., 11.7 3.25 8.3 133.0 140 5.3 83 3.8 1397 mm 5.500 5.50 11.7 3.25 8.3 2.87 2.00 139.7 140 5.3 83 3.8 73 - 51 - - - - 6 6.625 650 17.2 3.50 10.8 6.25 @ 12.2 2.00 7.0 10.75 30.4 550 17.4 150 168.3 165 . 7.8 89 4.9 159 i 55 51 3.2 273 13.8 140 7.9 159.0 mm 6.250 6.50 18.6 3.50 10.8 . 159.0 165 8.4 89 , 4.9 1 mm 6.500 6.50 15.5 3.50 . 9.8 3.13 11.4 2.00 7.4 10.75sw 29.0 5.50sw 19.0 165.1 165 7.0 89 4.4 79 5.2 51 3.4 273 13.2 140 8.6 @ Gooseneck design, end-to-end dimension fittings in this size contact your nearest Victaulic sales office t Chinese standard sizes Note: All fittings are ductile iron unless otherwise noted with an "sw or s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victauIic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 02012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 07.014 JtauIicr REV_R CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings i,- E C to -. -CtoE1 ___ Eto NO.12 GSNK C to E 1-Jff tO" Cto' C to toCE .L} _ 1. NO. 10 NO. 11 NO. 12 NO. 13 NO. 100 NO. 110 1J.L o. 110t 1. 90" Elbow ,. ; t•*e 221h,' Elbow . Radius Long Radius Elbow (S) 8 8.625 7.75 29.9 4.25 20.4 7.75 @ 20.0 2.00 10.1 14.25 66.0 7.25 36.0 200 219.1 197 j 13.6 108 9.3 197 9.1 51 4.6 362 30.0 184 16.3 10 10.750 9.00 63.3 4.75 1 37.5 1 4.38sw 30.0 2.13 11.8 15.00 107.0 6.25 57.0 250 273.0 229 28.7 121 17.0 I 111 13.6 54 5.3 381 48.5 159 25.9 12 12.750 10.00 74.0 5.25 T 66.7 4.885w 40.0 2.25 29.3 18.00 156.0 7.50 90.0 300 323.9 254 33.6 133 30.3 124 18.1 57 133 457 70.8 191 40.8 14 8 14.000 14.00 136.0 5.75 65.0 5.005w 46.0 3.50sw 32.0 21.00 s 164.0 8.75s 82.0 350 355.6 355.6 61.7 146 29.5 127 20.9 89 14.5 533 74.4 222 37.2 3770mm t 14.843 14.84 149.3 6.15 82.0 377.0 376.9 67.7 156.2 37.2 - - - - - - - - 168 400 16.000 406.4 16.00 406.4 171.0 77.6 6.63 168 88.0 39.9 5.00sw 127 58.0 26.3 4.005w 102 42.0 19.1 24.00s 610 210.0 95.3 10.005 100.0 254l 426.0 mm I 16.772 16.77 198.6 6.95 101.3 426.0 426.0 90.1 176.5 45.9 - - - - - - - 188 18.000 18.00 228.0 7.46 108.0 sw 5.50 65.0 4.50sw 53.2 27.00s 273.0 11.25s 135.0 450 457.0 457.2 103.4 189 50.0 140 29.5 114 24.1 686 j 123.8 286 61.2 4800mm t 18.898 18.90 1 291.0 7.83 141.7 - - - - - - - 480.0 . 480.0 132.0 198.8 64.3 208 20.00020.00298.0 8.28 138.0 6.00sw1 78.6 5.00sw1 65.0 I30.oOs343.o12.sos 174.0 500 508.0 508.0 135.2 210 62.6 152 36.0 I 127 29.5 I 762 155.6 318 . 78.9 5300mm 3 r 20.866 20.87 355.0 I 8.64 179.0 I - 530.0 530.0 161.0 1 219.4 : 81.2 l 248 24.000 24.00 438.0 9.94 221.0 I 7.005w 140.0 6.005w 60.0 36.00s 516.0 15.00s 251.0 1 600 610.0 609.6 198.7 252 100.2 1 178 1 63.5 152 27.2 914 234.1 381 i 113.9 6300mmt 24.803 24.80 545.0 10.27 255.2 - - - - - - - 6300 6300 2472 2610 1157 I 14 -1fl1nl_08 For AGS fitting information, see publication 20.05 @ Gooseneck design (GSNK), end-to-end dimension fittings in this size, contact your nearest Victaulic sales office. # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. t Chinese standard sizes Note: All finings are ductile iron unless otherwise noted with an 'sw" or "s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com JtauIicr VICTAULIC IS A REGISTERED TRADEMARK OF VICTAuLIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV..R . 07.01_5 CARBON STEEL PIPE GROOVED FITTINGS 07.01 Grooved End Fittings Reducing Base Support Elbow NO. R-10G Cry. x Grv. NO. R-10F Cry. x Flange .- C to E - ig, B Dia. NO. R-SOG C to E BOla. NO. R-10F i. 6 4 9.00 1.5 1.50 19.0 33.0 150 100 229 32 38 8.6 15.0 5 9.00 1.50 1.50 23.0 38.0 125 229 33 38 10.4 17.2 8 6 10.50 2.C3 1.50 33.0 52.0 200 150 267 54 38 15.0 23.6 10 8 1 12.00 2.'.0 1.50 61.0 88.0 250 200 305 61 38 27.7 39.9 Note: All fittings are ductile iron unless otherwise noted with .n sw, or s' S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com ictaulid VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 07.01 6 REV R CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings 07.01 Adapter Elbow NO. 18 90" Adapter Elbow NO. 19 45" Adapter Elbow C to GE C to E0 C to TE NO. 18 NO. 19 No 18 90' Adapt'e, Elbow No 19 45" Adapt*er Elbow @ ~ 20 1.050 26.9 2.25 57 2.25 57 0.5 0.2 1.50 38 1.50 38 0.5 0.2 1 25 1.315 33.7 2.25 57 2.25 57 0.5 0.2 - - - 14 32 1.660 42.4 2.75 70 2.75 70 1 0.9 0.4 - - 1½ 40 1.900 48.3 2.75 70 2.75 70 1.1 0.5 1.75 1.75 44 44 0.9 0.4 2 50 2.375 60.3 3.25 1 83 4.25 1 108 2.5 1.1 - - - 2 ½ 65 2.875 73.0 3.75 I 95 95 r 3.0 1.4 2.25 57 2.25 57 2.3 1.0 3 80 3.500 88.9 4.25 108 6.00 152 5.8 2.6 2.50 64 4.25 108 5.0 2.3 31/2 90 4.000 101.6 4.50 114 6.25 159 8.0 3.6 5.25 133 5.25 133 8.8 4.0 6 150 6.625 168.3 6.50 165 6.50 165 17.6 8.0 - 3.50 89 3.50 89 12.7 5.8 @ Available with British Standard Pipe Threads specify "BSP" clearly on order- Note: All fittings are ductile iron unless otherwise noted with an "sw" or "s" S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com VICTAuLIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. C 2012 VICTAuLIC COMPANY. ALL RIGHTS RESERVED. REVR 07.O1_7 CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings Tees, Crosses and True Wyes NO. 2OTee bC1oE1 NO. 35 Cross NO. 33 True Wye NO. 29M Tee with to Threaded Branch NO. 20 CtoE Cto SE NO 35 NO. 33 C to GE CtoTE NO. 29M N 1.050 2.25 0.6 2.25 0.9 2.25 I 2.00 • 0.7 2.25 • 2.25sw 0.6 20 26.9 57 0.3 57 0.4 57 51 03 57 57 0.3 1 1.315 2.25 1.0 2.25 1.3 2.25 2.25 1.1 2.25 2.25 1.0 25 33.7 57 0.5 57 0.6 57 57 0.5 57 57 0.5 1¼ 1.660 2.75 1.5 2.75 2.1 2.75 2.50 1.5 2.75 2.75 1.5 32 42.4 70 0.7 70 1.0 70 64 0.7 70 70 0.7 1½ 1.900 2.75 2.0 2.75 2.5 2.75 2.75 1.8 2.75 2.75 2.0 40 48.3 70 0.9 70 1.1 70 70 0.8 70 70 0.9 2 2.375 3.25 3.0 3.25 . 3.8 3.25 2.75 2.5 3.25 4.25 3.00 50 60.3 83 1.4 83 1.7 83 70 1.1 83 108 1.4 2½ 2.875 3.75 43 3.75 6.1 3.75 3.00 4.3 3.75 3.75 4.3 65 73.0 95 2.0 95 2.8 95 76 2.0 95 95 2.0 3.000 3.75 5.2 . 3.75 3.75 SW 5.2 76.1 mm 76.1 95 2.4 - - - - - 95 95 2.4 3 3.500 4.25 6.8 4.25 10.5 4.25 3.25 6.1 4.25 6.00 6.8 80 88.9 108 3.0 108 4.8 108 83 2.8 108 152 3.1 3½ 4.000 4.505w 7.9 4.50 - 11.5 4.50 3.50 9.6 4.50 4.505w 7.9 90 101.6 114 3.6 114 5.2 . 114 89 4.4 114 114 73.6 4.250 5.00 155 5.00 5.00sw 15.5 1080mm 108.0 127 7.0 - - - 127 127 7.0 4 4.500 5.00 11.9 .5.00 15.8 5.00 3.75 10.0 5.00 7.25 11.9 100 1143 127 5.4 127 7.2 . 127 95 43 127 184 5.4 4½ 5.000 5.25sw 15.0 5.25 18.5 5.25 5.255w 15.0 120 127.0 133 6.8 133 8.4 - - 133 133 6.8 1330mm 5.250 550 17.8 5.50 5305w 17.8 133.0 140 8.1 - . - - - - 140 140 8.1 5.500 5.50 17.8 5.50 5.50sw 17.8 1397mm 139.7 140 8.1 - - - - - 140 140 8.1 5 5.563 5.50 17.8 5.50 20.0 5.50 4.00 15.0 5.50 5.505w 17.8 125 141.3 140 8.1 140 9.1 140 -102 6.8 140 140 8.1 6.250 6.50 27.1 6.50 6.505w 27.1 1590 mm 159.0 165 12.3 - .. - . - - - 165 165 12.3 6.500 6.50 22.0 650 28.0 6.50 6.505w 22.0 1651 mm 165.1 165 10.0 165 12.7 - - - 165 165 10.0 6 6.625 6.50 25.7 6.50 28.0 6.50 450 223 6.50 6.50sw 25.7 150 168.3 165 11.7 165 12.7 165 114 10.1 165 165 11.7 8 8.625 7.75 47.6 7.75 48.0 7.75 6.00 36.0 7.75 7.755w 47.6 200 219.1 197 21.6 197 21.8 197 152 16.3 197 197 21.6 10 10.750 9.00 99.0 9.00 121.5 9.00 6.50 69.9 9.00 9.005w 73.0 250 273.0 229 44.9 229 55.1 229 155 31.7 229 229 33.1 12 12.750 10.00 133.0 10.00 110.0 10.00 7.00 80.0 10.00 10.005w 99.0 300 323.9 254 60.3 254 49.9 254 178 36.3 254 254 44.9 Note: All fittings are ductile iron unless otherwise noted with an "sw' or s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com vlclAuuc IS A REGISTERED TRADEMARK OF VICTAIJLIC COMPANY. 0 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 07.O1_8 ,4taUiicr REV_R CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Tees, Crosses and True Wyes NO. 20 Tee l-CtoE-1 NO. 35 Cross NO. 33 True Wye NO. 29M Tee with to Threaded Branch NO. 20 07.01 -CtoE Cto("\ Cto GE ItE Cti I 2_(_7_0 I 'L' NO 35 NO. 33 NO. 29M Size T'e Croos's (SW) e True Wye (SW) riwith 148 14.000 1 11.00 SW 145.0 1 11.00 1980. 11.00 7.50 134.2 11.00 Sw 11.00 145.0 350 355.6 1 279 65.8 279 89.8 279 191 60.8 279 279 65.8 377.0 mm 14.000 11.50 145.0 355.6 292 65.8 - - - - - - - - 168 16.000 12.00sw 186.0 12.00 1 250.0 12.00 8.00 167.0 12.00sw 12.00 186.0 400 406.4 305 84.4 305 113.4 305 203 75.7 305 305 84.4 426.0mm t 16.000 13.00 1 186.0 406.4 300 84.4 - - - - - - 188 18.000 15.50sw 260.0 15.50 350.0 15.50 850 234.0 15.505w 15.50 117.9 450 457.0 394 117.9 394 158.8 394 216 106.1 394 394 480.0 mmt 18.000 14.57 256.0 457.0 370 116.1 - - - - - - - 208 20.000 17.25sw 336.0 17.25 452.0 17.25 9.00 281.0 17.25 Sw 17.25 336.0 500 508.0 438 152.4 438 205.0 438 229 1275 438 438 152.4 530.0 mm t 20.000 15.395w 339.0 - 508.0 391 153.8 - - - - - - 248 24.000 20.00sw 592.0 1 20.00 795.0 20.00 10.00 523.0 1 20.00 Sw 20.00 592.0 600 610.0 508 268.5 508 360.6 508 254 1 237.2 508 508 268.5 630.0 mm t 24.000 17.375w 473.0 610.0 441 214.5 1 - - - - - - - - 14-60 350-150D rrrmn JO For AGS fitting Information, see publication 20.05 # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. t Chinese standard sizes Note: All fittings are ductile iron unless otherwise noted with an 'sw' or "s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com JAic- tauIicr vlcTAuuc IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 vICTAUuc COMPANY. ALL RIGHTS RESERVED. REV_R 07.01_9 CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Reducing Tee bctoEl CtoE1 I NO. 25 Grooved Branch NO. 291 Threaded Branch L C C to to NO. 25 NO. 291 I Size Inches mm No. 25 No. 29T Std. W/ Thd. Bran, Weight RIM MM Inches Inches Approx. Each 1 25 1 3A 20 2.25sw 2.24sw 57 1 57 1.0 0.5 11/4 32 1¼ 32 1 25 2.755w 2.755w 70 70 1.3 0.6 1½ 40 1½ 40 3A2.755w 2.755w 70 70 1.5 0.7 2.755w 2.755w 1.5 1 25 70 70 0.7 2.755w 2.75 sw 1.7 1 /4 32 70 - 70 0.8 2 50 2 50 V4 20 3.25 83 3.25 83 2.5 1.1 3.25 3.25 2.7 1 25 83 83 1.2 3.25sw 3.255w 1.8 1¼ 32 83 83 0.8 3.25 3.255w 3.0 11/2 40 . 83 83 1.4 2½ 65 X 21/2 65 X V4 20 3.75 sw 95 3.75 sw 95 3.9 1.8 3.75 3.75 sw 3.8 1 25 95 95 1.7 3.75 sw 3.755w 4.2 11/4 32 95 95 -- 1.7 3.75 3.75 3.9 116 40 95 1 95 1.8 3.75 3.75 sw 4.5 2 50 95 95 2.0 3 80 X 3 80 >< 20 3/4 4.255w 108 4.255w 108 5.7 2.6 4.25 4.25 6.1 1 25 108 108 - 2.8 4.25sw 4.255w 8.0 11/4 32 108 108 3.6 1 ½ 4.25 4.25w 6.5 40 108 108 2.9 4.25 4.255w 6.2 2 50 108 108 2.8 4.25 4.255w 6.4 2½ 65 108 108 2.9 4 100 X 4 100 X V4 20 5.00sw 5.00sw 127 127 8.0 3.6 5.00 5.00 7.8 1 25 127 127 i 3.5 07.01 - CtoE - rCtoE to to NO. 25-SW NO. 291-SW + Contact Victaulic for details. Note: All fittings are ductile iron unless otherwise noted with an sw or S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded IMPORTANT NOTE: No. 291 Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify "BSP" clearly on order. www.victaulic.com vICTAuLIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2012 VICTAUUC COMPANY. ALL RIGHTS RESERVED. 07.01_lO \4taUlicr REV_R CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings Reducing Tee C toE1 rCtoE.l T N NO. 25 Grooved Branch ft 1T O. 291 Threaded Branch ft,_fl C to NO. 25 NO. 29T - CtoE - o to NO. 25-SW C to to NO. 29T-SW 7ma - 6 150 6 x 150 x 3 80 6.50 165 6.50 165 26.5 12.0 6.50 6.50 25.0 4 100 165 165 11.3 6.50 6.50 23.2 5 125 165 165 10.5 6½ 165.1 616 x 165.1 3 80 6.50 165 6.50sw 165 24.0 10.9 6.50 6.50sw 25.0 4 100 165 165 11.3 8 200 8 200 1 ½ 7,75sw 197 7.75 sw 197 33.0 15.0 7.755w 7.755w 33.5 2 50 197 197 15.2 7.755w 7.75sw 39.0 2½ 65 197 197 17.7 7.75sw 7.75sw 33.6 3 80 197 197 15.2 7.75 7.75 41.8 4 100 197 197 19.0 7.75sw 7,75 Sw 34.0 5 125 197 197 15.4 7.75 7.75 42.3 6 150 197 197 19.2 7.75sw 197 7.75sw 197 48.0 21.8 1651 10 250 x 10 x 250 1112 40 9.00 229 9.00 229 62.0 28.1 9.005w 9.005w 62.0 2 50 229 229 28,1 9.005w 9.005w 62.4 2½ 65 229 229 283 9.00sw 9.00sw 1 60.0 3 80 229 229 27.2 9.00sw 9.00sw 61.0 4 100 229 229 27.7 9.00sw 9.005w 52.0 5 125 229 229 '23.6 9.00sw 9.00sw 59.0 6 150 229 229 26.8 9.005w 9.005w 6.4.7 78 200 229 229 29.3 Size No. 25 Sid. No. 29T w/ Tind. Bran c 11 Approx. V'eight Each 12 300 12 x 300 1 25 10.00sw 254 10.005w 254 77.0 34.9 10.00sw 10.005w 80.0 2 50 254 254 36.3 10,005w 10.00sw 78.0 2½ 65 254 254 35.4 10.005w 10.00sw 82.0 3 80 254 254 37.2 10.00sw 10.00sw 80.0 4 100 254 254 36.3 10.005w 10.00sw 75.0 5 125 254 254 34.0 10.005w I 10.005w 75.0 6 150 254 , 254 34.0 10.005w 10.005w 80.0 8 200 254 254 36.3 10.00sw 1 10.005w 84.0 10 250 254 1 254 38.1 14 350 x 14 350 >< 4 100 11.005w 279 11.005w 279 102.0 46.3 6 11.005w 11.005w 108.2 1501 279 279 49.1 11.00 1 11.00 112.0 8 200 279 279 50.8 11.00 11.00 120.0 10 300 279 279 54.4 11.00 11.00 129.1 12 300 279 279 58.6 16 400 x 16 400 X 4 100 + + 130.0 59.0 350-1500mm 4!1or AGS fitting information, see publication 20.05 + Contact Victaulic for details. Note: All fittings are ductile iron unless otherwise noted with an "sw or s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded IMPORTANT NOTE: No. 29T Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify BSP clearly on order. # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. www.victaulic.com vlcTAuuc IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 vicTAulic COMPANY. ALL RIGHTS RESERVED. REV_R \/tauIicr 07.01_il CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Reducing Tee NO. 25 Grooved Branch NO. 29T Threaded Branch 07.01 CtoE1 jCtoEj _ft-J ) to NO. 25 NO. 29T No. 25 No. 29T Approx. Size Std. w/ Thd. Branch Weight Each GM OM) #20 20 16 17.25 288.6 500 500 400 438 - 130.9 18 17.25 297.0 450 438 - 134.7 #24 24 8 20.00 20.00 340.0 600 600 200 508 1 508 154.2 10 20.00 20.00 343.9 250 508 508 156.0 12 20.00 20.00 352.8 300 508 508 160.0 14 § 20.00 360.0 350 508 - 163.3 16 20.00 378.0 -s 50~ 1711.5 - 18 § 20.00 380.0 450 508 20 20.00 373.0 500 508 - I 169.2 350-1500mm 4!8"For AGS fitting information, see publication 20.05 + Contact Victaulic for details. Note: All fittings are ductile iron unless otherwise noted with an 'sw" or 5= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded IMPORTANT NOTE: No. 29T Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify "BSP" clearly on order. # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. § Cast fitting available. Contact Victaulic for details. www.victaulic.com /tauIic VICTAULIC IS A REGISTERED TRADEMARK OF vICrAuLIC COMPANY. C 2012 vICTAUUC COMPANY. ALL RIGHTS RESERVED. 07.01.12 REV...R Bullhead Tee NO. 21 C to IL OR C to EOB NO. 21 Note: All fittings are ductile iron unless otherwise noted with an sw or S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded 07.01 Bull Plug NO. 61 E to E D NO. 61 WTI I an 2 50 2.375 4.00 60.3 102 2.5 1.1 2½ 65 2.875 5.00 3.0 73.0 127 1.4 3 80 3.500 1 6.00 4.5 88.9 152 2.0 4 100 4.500 7.00 7.5 114.3 178 3.4 5 125 5.563 8.00 12.0 141.3 203 1 5.4 6 150 6.625 168.3 10.00 1 17.0 254 1 7.7 IMPORTANT NOTES: Steel dish caps available through 247600mm, contact Victaulic. No. 61 Bull Plugs should be used in vacuum service with Style 72 or 750 couplings Note: All fittings are ductile iron unless otherwise noted with an "sw' or 's, S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings www.victaulic.com \j$(tauIic vICTAuLIC IS A REGISTERED TRADEMARK OF VICTAuLIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_R 07.01_13 CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings 450 Lateral NO. 30 Cto CL OR SE NO. 30 Nominal Size Actual 45" Lateral (SW) Size Inches min Outside Diameter Inches 20 26.9 114 51 0.5 1 1.315 5.00 2.25 i 1.7 25 33.7 127 57 0.8 14 1.660 5.75 2.50 2.5 (d) 32 42.4 1.900 146 6.25 l 64 1.1 2.75 3.5 1½ 40 48.3 2.375 159 7.00 70 r 1.6 2.75 4.6(d) 2 50 60.3 2.875 178 7.75 70 j 2.1 3.00 9.0 26 65 710 3.000 r 8.50 i 3.25 11.0 76.1 mm 76.1 216 83 5.0 3 3.500 8.50 3.25 11.7(d) 80 821 83 5.4 3½ 4.000 10.00 3.50 17.8 90 101.6 254 89 8.1 4 4.500 10.50 . 3.75 22.2 (d) 100 114.3 267 95 10.1 21.8 5 5.563 12.50 4.00 125 141.3 .-+-- 318 . 102 - 9.9 43.6 ------- 6.500 14.00 165.1 mm 4.50 165.1 356 1 114 19.8 6 6.625 14.00 4.50 43.6 150 168.3 356 114 19.8 8 8.625 i 18.00 6.00 72.0 200 219.1 . 457 152 32.7 10 10.750 1 20.50 6.50 . 105.0 250 273.0 521 165 47.6 12 12.750 23.00 7.00 165.0 300 323.9 584 178 74.8 148 14.000 26.50 750 276.0 350 355.6 673 191 125.2 168 16.000 29.00 8.00 344.2 400 406.4 737 . 203 156.1 18 8 18.000 32.00 8.50 429.0 450 457.0 813_2i64_194.6 208 20.000 : 35.00 9.00 500.0 500 508.0 889 229 226.8 248 24.000 40.00 10.00 715.0 600 610.0 1016 254 3243 350-1500trim 4,08- For AGS fitting information, see publication 20.05 It For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. Note: All fittings are segmentally welded steel unless otherwise noted with a (d) for ductile iron. www.victaulic.com jtauIic VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 07.01_14 REV_R CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings 45" Reducing Lateral NO. 30-R Ctol LEl . I / Cto SE / A- NO. 30-R Nominal ir 4 5'* Reducoing Lateral Size Inches 2 Inches i mm 8.50 Inches mm C to SE mm II ht 3.25 Each kg 80 50 9.8 80 216 83 4.4 8.50 3.25 9.8 21/2 65 215 83 4.4 4 4 X 2 1030 3.75 10.0 100 100 X 50 257 95 4.5 10.50 3.75 10.0 2½ 65 267 95 4.5 10.50 3.75 183 3 80 267 95 8.3 5 125 5 X 125 2 X 50 12.50 318 4.00 102 24.0 10.9 12.50 4.00 27.0 3 80 318 102 212.2 1250 4.00 26.5 4 100 318 102 12.0 6 6 3 14.00 4.50 37.0 150 150 80 356 114 16.8 14.00 4.50 36.0 4 100 356 114 16.3 14.00 4.50 44.7 5 125 356 114 20.3 8 8 4 18.00 6.00 62.0 200 X 200 X 100 457 152 28.1 18.00 6.00 755 5 125 457 152 34.2 18.00 6.00 82.0 6 150 457 152 37.2 10 10 4 X 20.50 6.50 104.8 250 X 250 100 521 165 1475 20.50 5.50 99.0 5 125 521 165 44.9 20.50 6.50 105.8 6 150 521 165 48.0 2050 650 118.0 8 200 521 165 53.5 12 300 X 12 300 X 5 125 23.00 584 7.00 178 122.0 55.3 - 23.00 7.00 137.0 6 150 584 - 178 62.1 23.00 7.00 147.0 8 200 584 178 66.7 23.00 7.00 167.0 10 250 1 584 178_1 75.8 07.01 Size Nominal 45- Reducing Lateral (SW) Approx. Size Inches mm 0 14 14 4 350 350 x 100 C to LE C to SE Weight Each Inches Inches Lbs. mm mm kg 26.50 Z50 172.0 573 191 78.0 - 26.50 7.50 187.0 6 150 673 191 84.8 26.50 7.50 205.8 8 200 673 191 93.4 26.50 7.50 235.0 10 250 573 191 106.6 26.50 7.50 250.0 12 300 673 191 113.4 16 16 6 400 X 400 150 29.00 737 8.00 203 215.0 97.5 29.00 8.00 252.5 8 200 737 203 114.5 29.00 8.00 4 265.0 10 250 737 203 120.2 29.00 8.00 295.0 12 300 737 1 203 133.8 29.00 8.00 I 305.0 14 350 737 203 138.3 18 18 6 32.00 8.50 1 274.0 450 X 450 X 150 813 216 124.3 32.00 8.50 275.0 8 200 813 215 124.7 32.00 8.50 347.0 813 215 157.4 12 300 32.00 850 350.0 14 350 813 216 158.8 32.00 850 362.0 16 400 813 216 164.2 4 20 20 12 500 500 X 300 35.00 889 9.00 229 415.0 188.2 35.00 9.00 1 420.0 14 350 889 229 190.5 35.00 9.00 425.0 16 400 889 229 192.8 #24 24 16 500 600 400 40.00 10.00 1016 254 425.0 192.8 40.00 10.00 570.0 20 600 1016 254 258.5 350-1500mm fitting Information, 0r AGS see publication 20.05 4! # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. Note: All fittings are segmentally welded steel unless otherwise noted a (d) for ductile iron. www.victaulic.com Idictaulid vICTAuLIC IS A REGISTERED TRADEMARK OF VICTAuLIC COMPANY. © 2012 VICTAUC COMPANY. ALL RIGHTS RESERVED. REV_R 07.01_15 CARBON STEEL PIPE - GROOVED FITTINGS 07.ól Grooved End Fittings Tee Wye NO. 32 NO. 32 2 x 2 x 2 2.75 7.00 9.00 4.63 6.4 5 5 5 4.00 12.50 16.13 10.00 48.0 50 50 50 70 178 229 118 2.9 125 125 125 102 318 410 254 21.8 21/2 x 2½ x 2½ 3.00 7.75 10.50 5.75 11.5 6 x 6 x 6 4.50 14.00 18.25 11.50 60.5 65 65 65 76 197 267 146 5.2 150 150 150 114 356 464 292 27.4 3 3 x 3 3.25 8.50 11.50 6.50 14.3 8 x 8 8 6.00 18.00 23.25 15.25 127.1 80 80 80 83 216 292 165 6.5 200 200 200 152 457 591 387 57.7 3½ 31/2 3½ 3.25 10.00 13.00 7.75 22.9 10 10 10 6.50 20.50 x >< 27.25 18.00 190.0 90 90 >< 90 89 254 330 197 10.4 250 250 250 165 521 692 457 186.2 4 4 4 3.75 10.50 13.63 8.13 26.0 12 12 12 7.00 23.00 31.00 20.50 240.0 100 100 100 95 267 346 207 11.8 300 300 300 j 178 584 787 521 108.9 Note: All fittings are ductile iron unless otherwise noted with an 'sw' or S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com \JtauIid VICTAULIC IS A REGISTERED TRADEMARK OF vICTAuLIC COMPANY. C 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 07.01_16 REV--R CARBON STEEL PIPE - GROOVED FITTINGS 070 1 Grooved End Fittings Adapter Nipple NO. 40 Grv. x Thd. NO. 42 Grv. x Bev. NO. 43 Grv. x Grv. E to E - III NO. 4Q* .-EtôE1 Ej NO. 42 E to E El NO. 43 IT Size Adapter Nipple (s) 1 -Y4 20 1.050 26.9 3.00 76 0.3 0.1 1 25 1.315 33.7 3.00 76 0.4 0.2 P14 32 1.660 42.4 4.00 102 0.8 0.4 1½ 40 1.900 48.3 4.00 102 0.9 0.4 2 50 2.375 4.00 1.2 60.3 102 0.5 21/2 65 2.875 73.0 4.00 102 1.9 0.9 3 80 3.500 88.9 4.00 102 2.5 1.1 31/2 90 4.000 101.6 4.00 102 2.1 0.9 4 100 4.500 114.3 16.00 152 5.5 2.5 - 5 125 5.563 141.3 6.00 152 7.4 3.4 Size Adapter Nipple (S) 6 150 6.625 168.3 6.00 9.5 152 4.3 8 8.625 6.00 14.2 200 219.1 152 6.4 10 250 10.750 273.0 8.00 27.0 203 12.2 12 300 12.750 323.9 8.00 33.0 203 15.0 * Available with British Standard Pipe Threads, specify "BSP' clearly on order. IMPORTANT NOTES: For pump package nipples with 1 ½" 40 mm hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well request special No. 40,42 or 43 nipples and specify No. 40-H, 42-H or 43-H on order. NOTE: 4- 12/100-300 mm diameter -8"/200mm minimum length required. # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. Note: All fittings are ductile iron unless otherwise noted with an "sw or "s 5= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com ,ltauIiC VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REVR 07.01_17 CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings Cap NO. 60 I T (b NO. 60 Size No. 60 I. rum Up 14 1.050 0.88 0.2 20 26.9 22 0.1 1 1.315 0.88 0.3 25 33.7 22 0.1 1 1/4 1.660 0.88 0.3 32 42.4 1 22 0.1 1½ 1.900 0.88 0.5 40 48.3 1 22 0,2 2 2.375 0.88 0.6 50 60.3 1 22 0.3 21/2 2.875 0.88 1.0 65 73.0 22 0.5 76.1 mm 3.000 0.88 1.2 3 3.500 0.88 1.2 80 88.9 22 0.5 36 4,000 0.88 ,. 2.5 90 101.6 22 1.1 1080mm 4.250 1.00 2.3 108.0 25 i 1.0 4 4.500 1.00 2.5 100 114.3 25 Z1.1 1330mm 5.250 1 1.00 4.5 133.0 25 2.0 1397 mm 5.500 1.00 . 4.5 139.7 25 2.0 5 5.563 1 1.00 4.6 125 141.3 25 2.1 - 159.0mm 6.250 1 1•00 6.8 165.1 mm 6.500 1.00 7.3 165.1 i 25 33 . ts Size ffm sitis 6 6.625 1.00 6.1 150 168.3 25 2.8 8 8.625 1.19 13.1 200 219.1 30 5.9 10 10.750 1.25 21.0 250 273.0 32 1 12 12.750 1.25 35.6 300 323.9 32 16.2 144 (s) 14.000 9.50 350 355.6 241 16 4 (s) 16.000 10.00 400 406.4 254 188(s) 18.000 11.00 450 457.0 279 20 8 (5) 20.000 12.00 500 508.0 305 24 8 (5) 24.000 13.50 600 610.0 343 350 1mm 4.08' For AGS fitting information, see publication 20.05 IMPORTANT NOTES: Steel dish caps available through 247600mm, contact Victaulic. No. 60 cap is not suitable for use in vacuum service with Style 7201 750 couplings. No. 61 bull plugs should be used, see pg. 35. # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. Note: All fittings are ductile iron unless otherwise noted with an 'sw" or s" S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. ictaulid 07.01_18 REV_R CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings Flanged Adapter Nipple E to E E to E NO. 41 ANSI Class 125 (Cast Iron) NO. 45F ANSI Class 150 Flat Face NO. 45R ANSI Class 150 Raised Face NO. 46F ANSI Class 300 Flat Face ij Vj NO. 46R ANSI Class 300 Raised Face NO. 41 No. 45F NO. 45R NO. 46F NO. 46R No. 41 125 .ANSI JI ANS .NSI 'L p~ 300 1 Size Flange Adapter Nipple ova IL 20 26.9 - 76 - 76 1.0 76 1.5 1 1.315 3 2.5 3 2.7 3 3.9 25 33.7 - 76 1.1 76 1,2 76 1.8 1% 1.660 4 3.0 4 3.3 4 4.8 32 42.4 - 102 -1.4 102 1.5 102 2.2 11A 1.900 4 3.5 4 3.9 4 6.9 40 48.3 102 1.6 102 - 1.8 102 3.1 2 2.375 4 5.5 4 6.2 4 8.2 50 60.3 102 25 102 2.8 102 3.7 216 2.875 4 8.0 4 9.9 4 11.9 65 73.0 102 3.6 102 4.5 102 5.4 3 3.500 - 4 9.5 4 11.4 4 16.5 80 88.9 102 4.3 102 - 5.2 102 7.5 3½ 4.00 4 12.0 4 15.1 4 20.1 90 101.6 102 5.4 102 6.8 102 9.1 4 4.500 6 16.7 6 18.4 6 27.4 100 114.3 152 7.6 152 8.3 152 12.4 5 5.563 6 21.5 6 21.3 6 35.3 125 141.3 152 9.8 152 9.7 152 16.0 6 6.625 6 26.5 6 275 6 47.5 150 1683 152 12.0 152 12.5 152 21.5 8 8.625 6 39.0 6 41.3 6 70.3 200 219.1 152 17.7 152 18.8 152 31.9 10 10.750 8 57.0 8 59.8 8 100.8 250 273.0 203 25.9 203 27.1 203 45.7 12 12.750 8 41.0 8 88.2 8 146.2 300 323.9 203 18.6 203 40.0 203 66.3 14# 14.000 8 8 8 + 350 355.6 203 - 203 + 203 16# 16.000 8 8 8 + 400 406.4 203 - 203 + 203 188 18.000 8 8 8 450 457.0 203 - 203 + 203 + 208 20.000 8 8 8 + 500 508.0 -203 - 203 + 203 248 24.000 8 8 8 600 610.0 203 - 203 I + + 350-1500mm 4,08- 203 14-60 For AGS fitting Information, see publication 20.05 IMPORTANT NOTES: + Contact Victaulic for details. Flanged adapter nipples are supplied with standard rolled grooves. Standard Cut grooves or machining for rubber lining are optionally available. Contact Victaulic for details. 8 For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office, Note: All fittings are ductile iron unless otherwise noted with an 'sw' or "s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com bFJ8 tauIjcf VICTAuLIc IS A REGISTERED TRADEMARK OF vIcTAuLIc COMPANY. © 2012 VlTALIC COMPANY. ALL RIGHTS RESERVED. REV,R 07.01_19 CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Swaged Nipple NO. 53 Grv. x Grv. EtoE-.1 NO. 54 Grv. x Thd. NO. 55 Thd. x Grv. NO. 53 07.01 - E to E E> NO. 55 - E to E F> NO. 54 Size Swaged Nipples (S) gap 2 1 6.50 2.0 50 25 165 0.9 1 ¼ 6.50 2.0 32 165 - 0.9 1 Vz 6.50 2.0 40 165 0.9 2½ 1 7.00 3.0 ><25 65 178 1.4 11/4 7.00 3.0 32 178 1.4 1½ 7.00 3.0 40 178 1.4 2 7.00 3.0 50 178 1.4 3 x 1 8.00 4.5 80 25 203 2.0 1 ¼ 8.00 4.5 32 203 2.0 11/2 8.00 4.4 40 203 2.0 2 8.00 45 50 203 2.0 2½ 8.00 43 65 203 2.0 31/2 3 8.00 6.8 90 __80 203 3.1 4 1 9.00 7.5 100 25 229 3.4 1 ¼ 9.00 7.5 32 229 3.4 11/2 9.00 7.5 40 229 3.4 2 9.00 7.5 50 229 3.4 4 2½ 9.00 7.5 __ 100 65 229 3.4 Size Swaged Nipples (S) 4 3 100 80 9.00 229 7.5 3.4 3½ 90 9.00 229 7.5 3.4 5 2 125 50 11.00 279 11.5 5.2 3 80 11.00 279 11.3 5.1 4 100 11.00 279 11.5 5.2 6 1 150 25 12.00 305 170 7.7 1¼ 32 12.00 305 17.0 7.7 1½ 40 12.00 305 17.2 7.8 2 50 12.00 305 17.4 7.9 2½ 65 12.00 305 17.4 7.9 3 80 12.00 305 17.4 7.9 31/2 90 12.00 305 17.4 7.9 4 100 12.00 305 175 7.9 4½ 120 12.00 305 17.5 7.9 5 125 12.00 305 17.5 7.9 8 6 200 __150 + 20.0 9.1 + Contact Victaulic for details. Note: All fittings are ductile iron unless otherwise noted with an 'sw' or S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com taUii VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2012 VICTAUUC COMPANY. ALL RIGHTS RESERVED. 07.01_20 REV_R CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings Female Threaded Adapter Hose Nipple NO. 80 E to NO. 48 E toE NO. 80 NO. 48 iI11TIo -'U. ________________________ 1 16 ~ 20 1.050 26.9 4 2.06 2.00 51 1.0 0.5 1 25 1.315 33.7 52 1.0 05 11/4 32 1.660 42.4 2.31 (Sw) 59 1.5 0.7 1½ 40 1.900 48.3 2.31 (sw) 59 1.5 0.7 2 50 2.375 60.3 2.50 64 1.4 0.6 2½ 65 2.875 73.0 2.75 70 1.5 0.7 3 80 3.500 88.9 2.75 70 2.9 1.3 4 100 4.500 114.3 3.25 83 45 2.0 Note: All fittings are ductile iron unless otherwise noted with an sw" or 5= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded IMPORTANT NOTE: Available with British Standard Pipe threads, specify "BSP clearly on order. Size No. Hose Nipple 48 (s) V~ 20 1.050 26.9 3.12 79 0.3 0.1 1 25 1.315 33.7 3.38 86 0.4 0.2 1¼ 32 1.660 42.4 3.88 98 0.6 0.3 1 ½ 40 1.900 48.3 3.88 98 0.8 0.4 2 50 2.375 60.3 4.50 114 1.1 0.5 2½ 2.875 5.38 2.0 65 73.0 5 137 0.9 3 80 3.500 88.9 5.75 146 J 3.2 1.5 4 100 4.500 114.3 7.00 178 4.9 2.2 5 5.563 8.75 8.0 125 141.3 222 3.6 6 6.625 10.12 14.3 150 168.3 257 6.5 8 200 8.625 219.1 11.88 302 24.7 11.2 10 250 10.750 273.0 12.50 318 40.1 18.2 12 300 12.750 323.9 14.50 62.0 368 28.1 Note: All fittings are ductile iron unless otherwise noted with an 'sw or s 5= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com !tauIict VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. Ac- REV_R 07.01_21 07.01 r-EtoE--.1 Fabricated Steel Fabricated Steel No.50 No.51 Size Size Inche mm Concentric E to E Inches Reducer : mm IIilIIII Eccentric Reducer j 3½ 3 250 2.0 9.50 sw 7.0 90 80 64 0.9 241 3.2 4 x 1 3.00 3.0 13.005w 65 100 25 76 1.4 330 2.9 1~ 4.6 32 + 2.1 - - 1½ 3.005w 2.6 10.005w 8.1 40 76 1.2 254 3.7 2 3.00 2.4 1 4.00 3.3 50 76 1.1 102 1.5 2½ 3.00 2.7 4.00 3.4 65 76 1.2 102 1.5 3 3.00 3.2 4.00 35 80 76 1.4 102 1.6 3½ 3.00 2.9 10.005w 8.0 90 76 13 254 3.6 5 2 11.O0sw 9.0 11.005w 5.2 125 50 279 4.1 279 2.4 2½ 4.00 4.3 11.005w 10.8 65 102 2.0 279 4.9 3 4.00 55 11.005w 11.1 80 102 2.5 279 5.0 4 3.50 4.3 5.00 12.0 100 89 1.9 127 5.4 6 1 4.00 5.0 11.505w 145 150 25 102 2.3 292 6.6 1½ 55 40 + 25 + + 2 4.00 6.6 11.505w 14.5 50 102 3.0 292 6.6 216 65 4.00 102 + 6.4 2.9 11.505w 292 14.2 6.4 3 4.00 6.4 5.50 15.0 80 102 2.9 140 6.8 4 4.00 65 1 5.50 17.0 100 102 2.9 140 7.7 5 4.00 6.4 5.50 T 17.0 125 102 2.9 140 7.7 8 2½ 16.00 7.9 12.00sw 26.1 200 65 406 3.6 305 11.8 3 5.00 9.3 12.00sw 22.0 80 127 4.2 305 10.0 CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Concentric/Eccentric Reducer NO. 50 Concentric E NO. 51 Eccentric Eta E Eli NO. 50 NO. 51 1.9 32 20 + 0.9 - - 1 1.9 25 + 0.9 - - 1½ V4 1.4 - - 40 20 + 0.6 1 2.50 0.8 8.505w 4.5 25 64 0.4 216 2.0 116 2.50 1.0 - 32 64 0.5 - 2 Y4 2.50 0.9 9.005w 2.0 50 20 64 0.3 229 0.9 1 2.50 0.7 9.005w 2.3 25 64 0.3 229 1.0 1/4 2.50 1.2 9.005w 4.6 32 64 0.5 229 2.1 1½ 3.50 1.0 3.50 1.1 40 89 0.5 89 0.5 2½ Y4 x 1.3 3.3 65 20 + 0.6 + 1.5 1 2.50 1.1 9.50 3.5 25 64 0.5 241 1.6 1A 3.50 3.3 3.50 1.4 32 89 1.5 89 0.6 1½ 2.50 3.6 9.505w 3.7 40 64 1.6 241 1.7 2 2.50 3.9 350 4.3 50 64 1.8 89 2.0 3 3/4 x 1.5 4.5 80 20 + 0.7 + 2.0 1 2.50 1 1.3 9.505w 4.8 25 241 0.6 241 2.2 1~ 2.50 1.4 4.8 32 64 6_+ 2.2 1½ 2.50 5.1 9505w 5.1 40 64 2.3 241 23 2 2.50 1.6 3.50 6.0 50 64 0.7 89 2.7 21/2 2.50 1.8 3.50 7.0 65 64 0.8 89 1. 3.2 76.1 2.50 2.1 64 1.0 Note: All fittings are ductile iron unless otherwise noted with an 'sw' or s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded www.victaulic.com \JtaUIiC VICTAULIC IS A REGISTERED TRADEMARK OF vICTAuLIc COMPANY. © 2012 vICTAuLIC COMPANY. ALL RIGHTS RESERVED. 07.01_22 REVR * CARBON STEEL PIPE - GROOVED FITTINGS 07.01 Grooved End Fittings Concentric/Eccentric Reducer NO. 50 Concentric .ltoE NO. 51 Eccentric E to -e. EIiIJ11 E~d NO. 50 NO. 51 Size Concentric Reducer Eccentric Reducer r &K Ff w 8 4 x 5.00 10.4 12.005w 23.0 200 100 127 4.8 305 10.4 5 5.00 11.6 12.005w 23.0 125 127 5.2 305 10.4 6 5.00 11.9 6.00 24.0 150 127 5.4 152 10.9 10 4 x 6.00 19.7 13.005w 32.0 250 100 152 8.9 330 14.5 S 34.3 34.6 + 15.6 + 15.7 6 6.00 20.0 13.005w 36.9 150 152 9.1 - 330 16.7 8 6.00 22.0 7.00 21.6 200 152 10.0 178 9.8 12 4 44.0 14.005w 48.0 300 100 + 20.0 356 21.8 6 7.00 24.6 14.005w 50.0 150 178 11.2 356 22.7 8 7.00 52.0 14.00sw 53.5 200 178 23.6 356 24.3 10 7.00 39.0 14.00sw 57.0 250 178 17.7 356 25.9 8 14 6 13.00 65.0 13.00 60.0 350 x 150 330 29.5 330 27.2 8 13.00 65.0 13.00 60.0 200 330 29.5 330 27.2 10 13.00 66.0 13.00 65.0 250 330 - 29.9 330 29.5 12 13.00 68.0 1 13.00 66.0 300 330 30.8 £ 330 29.9 8 16 8 14.00 1 73.0 14.00 73.0 400 200 356 i 33.1 355 33.1 10§ 14.00 73.0 14.00 73.0 250 356 [ 33.1 355 33.1 12 14.00 I 73.0 14.00 73.0 300 356 [ 33.1 355 33.1 14 14.00 73.0 14.00 73.0 350 356 33.1 355 33.1 918 10 15.00 91.0 I 15.00 91.0 450 x 250 381 41.3 381 413 1*-EtoE- E:~ El Fabricated Steel Fabricated Steel No.50 No.51 Size No Concentric 50 No. 51 II 1H a 1.. Reducer Eccentric Reducer 18 x 12 450 300 15.00 381 91.0 41.3 15.00 381 91.0 41.3 14 350 15.00 381 91.0 41.3 15.00 381 91.0 41.3 16 400 15.00 381 91.0 41.3 15.00 381 91.0 41.3 #20 x 10 500 250 20.00 508 110.0 49.9 20.00 508 177.0 80.3 12 300 20.00 508 120.0 54.4 20.00 508 120.0 54.4 14 350 20.00 . 508 149.0 67.9 20.00 508 149.0 67.9 16 400 20.00 508 120.0 54.4 20.00 508 120.0 54.4 18 450 20.00 508 136.0 61.7 1 20.00 1 508 136.0 61.7 #24 10 600 x 250 20.00 508 142.0 64.4 1 20.00 508 142.0 64.4 12 300 20.00 508 150.0 20.00 68.0 508 150.0 68.0 14 350 20.00 508 162.0 20.00 73.5 508 162.0 73.5 16 400 20.00 508 162.0 73.5 20.00 508 162.0 73.5 18 450 20.00 508 162.0 73.5 20.00 508 162.0 73.5 20 500 20.00 508 151.0 68.5 20.00 508 190.0 86.2 14-60 350-1500mm AOS For AGS fitting information, see publication 20.05 + Contact Victaulic for details. Available with male threaded small end No. 52. Note: All fittings are ductile iron unless otherwise noted with an "sw or S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded IMPORTANT NOTE: Steel eccentric reducers available through 307750mm, contact Victaulic for dimensions. # For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of Cut groove fittings in this size, contact your nearest Victaulic sales office. § Cast fitting available for JIS size. Contact Victaulic for details. www.victaulic.com J'tauIicr vICTAuLIC IS A REGISTERED TRADEMARK OF vIcTAuLIc COMPANY. 10 2012 VICTAuLIC COMPANY. ALL RIGHTS RESERVED. REV...R 07.01_23 CARBON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Small Threaded Reducer NO, 52 E Dl p-to E NO. 52 Size No. 52 Small Threaded Reducer No. 52F Concentric Reducer with SSPT Female Threaded End rum 116 1 2.50 0.8 40 25 64 0.4 - - 11/4 2.50 0.9 32 64 0.4 - - 2 '/4 2.50 0.9 50 20 64 0.4 - - 1 2.50 0.7 25 64 0.3 - - 1V4 2.50 1.2 32 64 0.5 - - 1½ 2.50 1.0 40 64 0.5 - 21/2 1 2.50 1.1 65 25 64 0.5 - 1~ 2.50(sw) 1.2 - 32 64 0.5 - 1½ 2.50(sw) 1.3 40 64 0.6 - - 2 3.00 1.4 50 76 0.6 - 76.1 x 48.3 63.5 0.8 63.5 0.77 60 - - 63.5 0.85 8 ) +(sw) 0.7 - - 1 2.50 1.3 25 64 0.6 - 1¼ 2.50 1.5 32 64 1 0.7 1 - - 1½ 2.50(sw) 1.5 40 64 0.7 - - 2 2.50 1.5 50 2½ 2.50 2.4 65 64 1.1 - - 88.9 x 42.4 63.5 0.9 63.5 0.82 48.3 63.5 0.9 63.5 0.85 60 - - 63.5 0.89 4 1 3.00 2.3 100 25 76 1.0 - - 1½ 3.00 2.7 40 76 1.2 - - 2 3.00 2.6 50 76 1.2 - C, ' 07.61 Size No. Small Threaded 52 Reducer Concentric No. 52F Reducer with BSPT Female Threaded End 4 2½ 3.00 2.6 100 x 65 76 1.2 3 3.00 2.5 80 76 1.1 - - 108 x 42.4 76.2 1.3 76 .2 1.32 48.3 76.2 1.3 76.2 1.35 60 - - 76.2 1.39 114.3 x424 ..._J.L._ 1.3 76.2 48.3 76.2 1.3 1 76.2 L 1.34 60 - - 76.2 1.40 5 125 x 4 100 + 4.5 2.0 - - 133 x 60 - - 114.3 2.17 139 x 60 - - 114.3 2.26 6 1 4.00 5.5 150 25 102 2.5 - - 2 4.00 5.7 50 102 2.6 - - 216 4.00 5.8 65 102 2.6 - - 400 5.8 80 102 2.6 - - 00 +(sw) 6.5 2.9 - - 125 +(sw) 2.0 0.9 - - 159 x 42.4 114.3 2.2 114.3 2.1i5--- 48.3 114.3 2.2 114.3 2.51 60 - - 114.3 2.60 165.1 x 42.4 101.6 2.4 101.6 2.90 48.3 101.6 2.6 1 101.6 2.95 60 - - 1.5 0.7 1 - 101.6 3.00 - 8 2 200 50 16.00 406 21/2 16.00 1.7 65 406 0.8 - - + Contact Victaulic for details. Note: All fittings are ductile iron unless otherwise noted with an sw or s S= Carbon Steel Direct Roll Groove (OGS) SW= Carbon Steel Segmentally Welded IMPORTANT NOTE: Available with British Standard Pipe Threads, specify "BSP" clearly on order to El Dl NO. 52F www.victaulic.com \JtauIict VICTAUUC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2012 VICTAUUC COMPANY. ALL RIGHTS RESERVED. 07.01_24 REV_R INSTALLATION Reference should always be made to the 1-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at w.victaulic.com. WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. UPDATED 08/2012 07.01 1449 REV R ictauliC vlcTAuuc IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. C 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 07.01