HomeMy WebLinkAbout1287 CARLSBAD VILLAGE DR; ; FA160050; PermitCity of Carlsbad
Fire Alarm Permit
Permit No: FA160050
1287 CARLSBAD
Job Address:
VILLAGE DR
Permit Type: FALARM
Parcel No: 1561907007
Lot #: 0
Reference No.:
PC #:
Status: ISSUED
Applied 8/31/2016
Approved: 9/7/2016
Issued: 9/7/2016
Inspector:
Project Title: CARLSBAD PEDIATRIC SMILES T.I.: INSTALL A NEW FIRE
ALARM MONITORING SYSTEM CONSISTING OF THE
EQUIPMENT SHOWN IN HTE DEVICE LEGEND ON THE PLANS.
Applicant:
JJJ ENTERPRISES
533 S VINEWOOD ST
ESCONDIDO CA
760-747-3050
Owner:
TSAI CHIN-ZONG&CHIN-CHIANG
1521 VIRGINIA RD
SAN MARINO CA
Fees ($) Add'I Fees ($) Total ($) Balance ($)
314 0 314 0
mploplop EHVERPRmEa
FIRE ALARM - SECURITY - LOW VOLTAGE SYSTEMS
CASA DE LAS CAMPANAS T.I.
NORTE DINNING & TERRACE
18755 W BERNARDO DRIVE
RANCHO BERNARDO, CA 92.127
-FIRE ALARM SYSTEM
MATERIAL DATA SHEETS
FAl 60050
1287 CARLSBAD VILLAGE DR
BILL OF MATERIALS
SYSTEM SENSOR P2R 2-WIRE WALL MOUNTED HORN/STROBE
CSFM# 7125-1653:0188
SYSTEM SENSOR P2RK 2-WIRE CEILING MOUNT WEATHERPROOF HORN/STROBE
CSFM# 7125-1653:0187
Indoor Selectable-
Output Horns,
Strobes, and
Horn Strobes for
Wall Applications
SpectrAlertO Advance audible visible notification products
are rich with features guaranteed to cut installation times
and maximize profits.
Features
Plug-in design with minimal intrusion into the back box
Tamper-resistant construction
Automatic selection of 12- or 24-volt operation at
15 and 15/75 candela
Field-selectable candela settings on wall units: 15, 15/75,
30, 75, 95, 110, 115,135, 150,177, and 185
Horn rated at 88+ dBA at 16 volts
Rotary switch for horn tone and three volume selections
Universal mounting plate for wall units
Mounting plate shorting spring checks wiring continuity before
device installation
Electrically Compatible with legacy SpectrAlert devices
Compatible with MDL3 sync module
Listed for ceiling or wall mounting
I R! 631NP77"M V
, Nirl'.
The SpectrAlert Advance series offers the most versatile and
easy-to-use line of horns, strobes, and horn strobes in the industry.
With white and red plastic housings, wall and ceiling mounting
options, and plain and FIRE-printed devices, SpectrAlert Advance
can meet virtually any application requirement.
Like the entire SpectrAlert Advance product line, wall-mount horns,
strobes, and horn strobes include a variety of features that increase
their application versatility while simplifying installation. All devices
feature plug-in designs with minimal intrusion into the back box,
making installations fast and foolproof while virtually eliminating
costly and time-consuming ground faults.
To further simplify installation and protect devices from construction
damage, SpectrAlert Advance utilizes a universal mounting plate
with an onboard shorting spring, so installers can test wiring
continuity before the device is installed.
Installers can also easily adapt devices to a suit a wide range of
application requirements using field-selectable candela settings,
automatic selection of 12- or 24-volt operation, and a rotary switch
for horn tones with three volume selections.
Agency Listings
SIGNAUNG
& <~> MEA
LISTED APPROVED approved 7125-1653:186 (indoor strobes)
.7125-1653:188 (horn strobes.
S4011 (chimes, hors strobes, horns)
S5512 (strobes)
3023572 M0A452-05.E chime strobes)
7135-1653:189 (horns, chimes)
SpectrAlert Advance Specifications
General
SpectrAlert Advance horns, strobes, and horn strobes shall mount to a standard 4 x 4 x 11/2-inch back box, 4-inch octagon back box, or
double-gang back box. Two-wire products shall also mount to a single-gang 2 x 4 x 17/8-inch back box. A universal mounting plate shall
be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.
Also, SpectrAlert Advance products, when used with the Sync.Circuft'° Module accessory, shall be powered from a non-coded notification
appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync.Circuit Module, 12-volt-rated notification
appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between
16.5 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-
wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95
110, 115, 135, 150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model ______ listed to UL 1971 and shall be approved for fire protective service
The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model ______ listed to UL 1971 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light
shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch
between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. On four-wire
products, the strobe shall be powered independently of the sounder. The horn on horn strobe models shall operate on a coded or non-coded
power supply.
Synchronization Module
The module shall be a System Sensor Sync.Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module
shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns
on horn strobe models over a single pair of wires. The module shall mount to a 411/16 x 411/16 x 21/8-inch back box. The module shall also
control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more
synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply.
Standard Operating Temperature 32°F to 120°F (0°C to 49°C)
Humidity Range 101093% non-condensing
Strobe Flash Rate 1 flash per second
Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR1
Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 1610 33 V (24 V nominal)
Operating Voltage Range MDL3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal)
InputTerminal Wire Gauge 1210 18AWG
Wall-Mount Dimensions (including lens) 5.6"L x 4.7"W x 2.5"D (142 mm L x 119 mm W x 64 mm D)
Horn Dimensions 5.6"L x 4.7"W x 1.3"D (142 mm Lx 119 mm W x 33 mm 0)
Wall-Mount Trim Ring Dimensions (sold as a5 pack) (TR-HS) 5.7"L x 4.8"W x 0.35'D (145 mm L x 122 mm W x 9 mm D)
Notes:
Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs
P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 Cd.
UL Current Draw Data
IIT1T1lUL
Candela
Standard 15
Candela 15/75
Range 30
75
95
110
115
High 135
Candela 150
Range 177
185
8-17.5 Volts
DC FWR
123 128
142 148
NA NA
NA NA
NA NA
NA NA
NA NA
NA NA
NA NA
NA NA
NA NA
16-33 Volts
DC FWR
66 71
77 81
94 96
158 153
181 176
202 195
210 205
228 207
246 220
281 251
286 258
i
Sound Pattern
Temporal
Temporal
Temporal
Non-temporal
Non-temporal
Non-temporal
Coded
Coded
Coded
dB
High
Medium
Low
High
Medium
Low
High
Medium
Low
I]
8-17.5 Volts 16-33 Volts
DC FWR DC FWR
57 55 69 75
44 49 58 69
38 44 44 48
57 56 69 75
42 50 60 69
41 44 50 50
57 55 69 75
44 51 56 69
40 46 52 50
I
DC Input
8-17.5 Volts
15 15175
16-33 Volts
15 15175 30 75 95 110 115
Temporal High 137 147 79 90 107 176 194 212 218
Temporal Medium 132 144 69 80 97 157 182 201 210
Temporal Low 132 143 66 77 93 154 179 198 207
Non-Temporal High 141 152 91 100 116 176 201 221 229
Non-Temporal Medium 133 145 75 85 102 163 187 207 216
Non-Temporal Low 131 144 68 79 96 156 182 201 210
FWR Input
Temporal High 136 155 88 97 112 168 190 210 218
Temporal Medium 129 152 78 88 103 160 184 202 206
Temporal Low 129 151 76 86 101 160 184 194 201
Non-Temporal High 142 161 103 112 126 181 203 221 229
Non-Temporal Medium 134 155 85 95 110 166 189 208 216
Non-Temporal Low 132 154 80 90 105 161 184 202 211
. -
DC Input
16-33 Volts
135 150 177 185 FWR Input
16-33 Volts
135 150 177 185
Temporal High 245 259 290 297 Temporal High 215 231 258 265
Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258
Temporal Low 232 251 282 292 Temporal Low 207 221 248 256
Non-Temporal High 255 270 303 309 Non-Temporal High 233 248 275 281
Non-Temporal Medium 242 259 293 299 Non-Temporal Medium 219 232 262 267
Non-Temporal Low 238 254 291 295 Non-Temporal Low 214 229 256 262
Horn Tones and Sound Output Data
8-17.5 16-33 24-Volt Nominal
Switch Volts Volts Reverberant Anechoic
Position Sound Pattern dB DC FWR DC FWR DC FWR DC FWR
1 Temporal High 78 78 84 84 88 88 99 98
2 Temporal Medium 75 75 80 80 86 86 96 96
3 Temporal Low 71 71 76 76 83 80 94 89
4 Non-Temporal High 82 82 88 88 93 92 100 100
5 Non-Temporal Medium 78 78 85 85 90 90 98 98
6 Non-Temporal Low 73 74 81 81 88 84 96 92
Coded High 82 82 88 88 93 92 101 101
Coded Medium 78 78 85 85 90 90 97 98
9t Coded Low 74 75 81 81 88 85 96 92
- tSettings 7, 8, and 9 are not available on 2-wire horn strobes.
SpectrAlert Advance Dimensions
Wall-mount horn strobes
SpectrAlert Advance Ordering Information
Wall Horn Strobes
P2R 2-Wire Horn Strobe, Standard cd, Red
P2R-P 2-Wire Horn Strobe, Standard cd, Red, Plain
P2R-SP 2-Wire Horn Strobe, Standard cd, Red, "FUEGO"
P2RH 2-Wire Horn Strobe, High cd, Red
P2RH-P 2-Wire Horn Strobe, High cd, Red, Plain
P2W 2-Wire Horn Strobe, Standard cd, White
P2W-P 2-Wire Horn Strobe, Standard cd, White, Plain
P2WH 2-Wire Horn Strobe, High cd, White
P2WH-P 2-Wire Horn Strobe, High cd, White, Plain
P4R 4-Wire Horn Strobe, Standard cd, Red
P4R-P 4-Wire Horn Strobe, Standard cd, Red, Plain
P4RH 4-Wire Horn Strobe, High cd, Red
P4W 4-Wire Horn Strobe, Standard cd, White
Wall Strobes
SR Strobe, Standard cd, Red
SR-P Strobe, Standard cd, Red, Plain
SR-SP Strobe, Standard cd, Red, "FUEGO"
1
Wall Strobes (cont.)
SRH Strobe, High cd, Red
SRH-P Strobe, High cd, Red, Plain
SRH-SP Strobe, High cd, Red, "FUEGO"
SW Strobe, Standard cd, White
SW-P Strobe, Standard cd, White, Plain
SWH Strobe, High cd, White
SWH-P Strobe, High cd, White, Plain
Horns
HR Horn, Red
HW Horn, White
Accessories
TR-HS Trim Ring, Wall, Red
SBBR Indoor Surface Mount Back Box, Red
SBBW Indoor Surface Mount Back Box, White
Notes:
All -P models have a plain housing (no 'FIRE marking on cover)
All -SP models have "FUEGO" marking on cover
"Standard cd" refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings.
"High cc!" refers to strobes that include 135, 150, 177, and 185 candela settings.
r57jfl 3825 Ohio Avenue • St. Charles, IL 60174 02514 system Sensor
,$ Phone: 800-SENSOR2 • Fax: 630-377-6495 Product specdicat'ons subject to change without notice. Vat systemseasoccom
for current product information. including the roost version at this data sheet. www.systemsensor.com AV0515201 • 1/14
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM IL
LISTING SERVICE
LISTING No. 7125-1653:0188 Page 1 of I
CATEGORY: 7125-- FIRE ALARM DEVICES FOR THE HEARING IMPAIRED
LISTEE: System Sensor, Unincorporated Div of Honeywell Intl lnc.3825 Ohio Ave, St. Charles, IL
60174
Contact: Trish Linhart (630) 762-5025 Fax (630) 377-7245
Email: trish.linhart@systemsensor.com
DESIGN: Models CHSR and CHSW Chime/Strobes.
Models P2R, P2W, P2RH and P2WH Horn/Strobes two-wire type, rectangular enclosure.
Models PC2R, PC2W, PC2RH and PC2WH Horn/Strobes two-wire type, round enclosure
Models P4R, P4W, P4RH and P4WH Horn/Strobes four-wire type, rectangular enclosure.
Models PC4R, PC4W, PC4RH and PC4WH Horn/Strobes* four-wire type, round enclosure.
All models are intended for indoor use only unless other wise indicated. Models may be
followed by the suffix "K" indicating indoor or outdoor use, or may be followed by suffix "P' for
plain housing with no lettering. "K" suffix models are suitable for outdoor applications at
temperatures from -40°F to +151°F (-40°C to +66°C) and are rated NEMA 4X when used with
the System Sensor weather proof back boxes models SA-WBB (Wall), SA-WBBW (Wall),
SA-WBBC (Ceiling) and *SA..WBBCW (Ceiling). Refer to listee's data sheet for additional
detailed product description and operational considerations.
RATING: Standard Horn/Strobes and Chime/Strobes 8- 17.5 or 16-33 VDC/FWR
Hi CD Horn/Strobes 16-33 VDC/FWR
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances,
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listee's name, model number, electrical rating, and UL label.
APPROVAL: Listed as *horn/strobes or chime/strobes suitable for signaling appliances and equipment for
the hearing impaired applications when used with separately listed compatible fire alarm
control units. Horn/strobes with -K suffix are suitable for indoor or outdoor use, ceiling or wall
mount. Chime section is suitable for private mode and indoor use only.
Horn/Strobes or chime/strobes* can generate the distinctive three-pulse audible Temporal
Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72,
2010 Edition. Refer to listee's Installation Instruction Manual for details.
*Corrected 12-15-11 bh
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2016 Listing Expires June 30, 2017
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division
SVSTEl VII
Outdoor Selectable.
Output Horns,
Strobes, and
Horn Strobes for
Wall Applications
SpectrAlerff Advance outdoor audible visible products
are rich with features that cut installation times and
maximize profits.
Features
Weatherproof per NEMA 4X, 1P56
Listed to UL 1638 (strobe) and UL 464 (horn)
Compatible with System Sensor synchronization protocol and
legacy SpectrAlert products
Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115,
135, 150, 177, and 185
Automatic selection of 12- or 24-volt operation at 15 and
15/75 candela
Rotary switch for horn tone and three volume selections
Horn rated at 88+ dBA at 16 volts
Rated from —40°F to 151°F
Universal mounting plate with an onboard shorting spring that
tests wiring continuity before devices are installed
Plug-in design with minimal intrusion into the back box
Tamper-resistant construction
Listed for ceiling or wall mounting
Agency Listings
SIBNALING
LISTED FM IIIEA 7300-1653187 (outdoor strobes)
S4011 (chimes. horn strobes. lrorrrs) APPROVED approved 7125-1653:188 (horn strobes.
Chime strobes)
S3593 )outdoor and alert Strobes) 3023572 MEA452.05-E 7135-1653189 (horns, chimes)
SpectrAlert Advance offers the broadest line of outdoor horns,
strobes, and horn strobes in the industry. With white or red plastic
housings, wall or ceiling mounting options, and plain or FIRE-printed
devices, SpectrAlert Advance can meet virtually any application
requirement, including indoor, outdoor, wet, and dry applications in
temperatures from —40°F to 151°F.
Like the entire SpectrAlert Advance line, outdoor horns, strobes,
and horn strobes for wall applications include a variety of features
that increase application flexibility and simplify installation. First,
field-selectable settings, including candela, automatic selection of
12- or 24-volt operation, horn tones, and three volume options enable
installers to easily adapt devices to meet requirements.
Next, SpectrAlert Advance devices use a universal mounting plate
for both wall and ceiling applications. This mounting plate includes
an onboard shorting spring that ensures wiring continuity before
devices are installed, so installers can verify proper wiring without
mounting the devices and exposing them to potential construction
damage. Once the plates are mounted, all SpectrAlert Advance
devices utilize a plug-in design with a single captured screw to
speed installation and virtually eliminate costly ground faults.
Outdoor devices ship with weatherproof plastic back boxes (metal
back boxes are available separately) that accommodate in-and-
out wiring for daisy chaining devices. Plastic back boxes feature
removable side flanges and improved resistance to saltwater
corrosion. Knock-outs located on the back eliminate the need to drill
holes for screw-in mounting. Plastic and metal weatherproof back
boxes come with 1/4-inch top and bottom conduit entries and 3/4-inch
knock-outs at the back. A screw-in NPT plug with an 0-ring gasket
for a watertight seal is included with each back box.
SpectrAlert Advance Outdoor Horn, Strobe, and Horn Strobe Specifications
General
SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall
be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.
Also, SpectrAlert Advance products, when used with the Sync.Circuit'° Module accessory, shall be powered from a non-coded notification
appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync-Circuit Module, 12-volt-rated notification
appliance circuit outputs shall operate between 9 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 17
and 33 volts. Outdoor SpectrAlert Advance products shall operate between -40 and 151 degrees Fahrenheit from a regulated DC or full-wave
rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110,
115, 135, 150, 177, and 185.
Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and shall be approved for fire protective service
The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved
per UL. The strobe shall be suitable for use in wet environments.
Horn Strobe Combination
The horn strobe shall be a System Sensor SpectrAlert Advance Model ______ listed to UL 1971 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe
light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to
switch between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch.
On four-wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or
non-coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The
horn strobe shall be suitable for use in wet environments.
Operating Temperature -40°F to 151°F (-40°C to 66°C)
Strobe Flash Rate 1 flash cer second
Nominal Voltage Regulated 12 DC/F\NR or regulated 24 DC/FWR1
Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Input Terminal Wire Gauge 12 to 18 AWG
Wall-Mount Dimensions (including lens) 5.6"L x 4.7"W x 2.5"D (142 mm L x 119 mm W x 64 mm D)
Horn Dimensions 5.6"L x 4.7W x 1.3"D (142 mm Lx 119 mm W x 33 mm D)
Wall-Mount Weatherproof Back Box Dimensions (SA-WBB) 5.7"L x 5.1 "W x 2.0'D (145 mm L x 130 mm W x 51 mm D)
Notes:
Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs
P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.
AVDSO12O1
UL Current Draw Data
Amwamxwam 1 I ®G 1
8-17.5 Volts 16-33 Volts 8-17.5 Volts 16-33 Volts
Candela DC FWR - DC FWR Sound Pattern dB DC FWR DC FWR
Standard 15 123 128 66 71
Candela 15/75 142 148 77 81
Range 30 NA NA 94 96
75 NA NA 158 153
95 NA NA 181 176
110 NA NA 202 195
115 NA NA 210 205
Temporal High 57 55 69 75
Temporal Medium 44 49 58 69
Temporal Low 38 44 44 48
Non-Temporal High 57 56 69 75
Non-Temporal Medium 42 50 60 69
Non-Temporal Low 41 44 50 50
Coded High 57 55 69 75
High 135
Candela 150
Range 177
185
NA
NA
NA
NA
NA
NA
NA
NA
228
246
281
286
207
220
251
258
Coded
Coded
Medium 44 51 56
Low 40 46 52
69
50
Ia®rn D
DC Input
8-17.5 Volts
15 15/75
16-33 Volts
15 15175 30 75 95 110 115
Temporal High 137 147 79 90 107 176 194 212 218
Temporal Medium 132 144 69 80 97 157 182 201 210
Temporal Low 132 143 66 77 93 154 179 198 207
Non-Temporal High 141 152 91 100 116 176 201 221 229
Non-Temporal Medium 133 145 75 85 102 163 187 207 216
Non-Temporal Low 131 144 68 79 96 156 182 201 210
FWR Input
Temporal High 136 155 88 97 112 168 190 210 218
Temporal Medium 129 152 78 88 103 160 184 202 206
Temporal Low 129 151 76 86 101 160 184 194 201
Non-Temporal High 142 161 103 112 126 181 203 221 229
Non-Temporal Medium 134 155 85 95 110 166 189 208 216
Non-Temporal Low 132 154 80 90 105 161 184 202 211
DC Input
16-33 Volts
135 150 177 185 FWR Input
16-33 Volts
135 150 177 185
Temporal High 245 259 290 297 Temporal High 215 231 258 265
Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258
Temporal Low 232 251 282 292 Temporal Low 207 221 248 256
Non-Temporal High 255 270 303 309 Non-Temporal High 233 248 275 281
Non-Temporal Medium 242 259 293 299 Non-Temporal Medium 219 232 262 267
Non-Temporal Low 238 254 291 295 Non-Temporal Low 214 229 256 262
Candela Derating
For K series products used at low temperatures, listed
candela ratings must be reduced in accordance with
this table.
Horn Tones and Sound Output Data
113=00=111 agomd2z
8-17.5 16-33
Switch Sound Volts Volts
I
24-Volt Nominal
Reverberant Anechoic
Listed Candela Candela rating at —40°F
15
Do not use below 32°F
30
15/75
75 44
95 70
110 110
115 115
135 135
150 150
177 1177
185 1185
1 Temporal High 78 78 84 84 88 88 99 98
2 Temporal Medium 74 74 80 80 86 86 96 96
3 Temporal Low 71 73 76 76 83 80 94 89
4 Non- High 82 82 88 88 93 92 100 100 Temporal
5 Non- Medium 78 78 85 85 90 90 98 98 Temporal
6 Non- Low 75 75 81 81 88 84 96 92 Temporal
7t Coded High 82 82 88 88 93 92 101 101
8t Coded Medium 78 78 85 85 90 90 97 98
9t Coded Low 75 75 81 81 88 85 96 92
tSettings 7, 8, and 9 are not available on 2-wire horn strobe. AVDS01201
Wall-Mount Horn Strobes erproof Back Box
SpectrAlert Advance Diagrams
I!
Wall-Mount Horn Strobe with Plastic Weatherproof Back Box
SpectrAlert Advance Ordering Information
...
Wall Horn Strobes
P2RK*t 2-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
P2RHK*t 2-Wire Horn Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box)
P2WK*t 2-Wire Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
P2WHK*t 2-Wire Horn Strobe, High cd, White, Outdoor (includes plastic weatherproof back box)
P4RKt 4-Wire Horn Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
P4WK 4-Wire Horn Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
P2RHK-120 2-Wire Horn Strobe, High cd, Red, Outdoor, 120 V (includes plastic weatherproof back box)
Wall Strobes
SRK*t Strobe, Standard cd, Red, Outdoor (includes plastic weatherproof back box)
SRHK*t Strobe, High cd, Red, Outdoor (includes plastic weatherproof back box)
SWK°t Strobe, Standard cd, White, Outdoor (includes plastic weatherproof back box)
SWHK*t Strobe, High cd, White, Outdoor (includes plastic weatherproof back box)
Horns
HRKt Horn, Red, Outdoor (includes plastic weatherproof back box)
Accessories
SA-WBB Red, Metal Weatherproof Back Box
SA-WBBW White, Metal Weatherproof Back Box
Notes:
* Add "-F" to model number for plain housing (no "FIRE" marking on cover), e.g., P2RK-P.
t Add "-R" to model number for weatherproof replacement device (no back box included), only for use with weatherproof outdoor flush mounting plate, WTP and WTPW.
"Standard cd" refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. "High cd" refers to strobes that include 135, 150, 177, and 185
candela settings. When replacing standard outdoor units both the device and back box must be replaced.
@20 2 Systern Sensor, 3825 Ohio Avenue • St. Charles, IL 60174 Product specifications subject to change aathootroace. Vail sysleraserrsorcora
\ SENSORe Phone: 800-SENSOR2 • Fax: 630-377-6495 for carre,rt product aforrcvorracluderg halves! version of this data sheet.
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. 7300-1653:0187 Page 1 of 1
CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES
LISTEE: System Sensor, Unincorporated Div of Honeywell Int'l Inc.3825 Ohio Ave, St. Charles, IL
60174
Contact: Trish Linhart (630) 762-5025 Fax (630) 377-7245
Email: trish.linhart@systemsensor.com
DESIGN: Models SWK, SWHK, SCWK, SCWHK, SRK, SRHK, SCRK and SCRHK strobe lights
intended for indoor or outdoor use and may be mounted on the wall or the ceiling. These
strobe lights are suitable for outdoor use at an operating temperature range of -40°F to 150°F
(-40°C to 660C)* rating and are NEMA 4X rated when used with the Listed models SA-WBB
(wall), SA-WBBW (Wall) or the model SA-WBBC (ceiling), SA-WBBCW (Ceiling)
weatherproof back boxes. May be followed by suffix -P for plain housing with no lettering.
Refer to listee's data sheet for additional detailed product description and operational
considerations.
RATING: 8-17.5 or 16-33 VDC/FWR
INSTALLATION: In accordance with listee's printed installation instruction, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listee's name, model number, electrical rating and UL label.
APPROVAL: Listed as strobe lights for general signaling. For indoor or outdoor use. Refer to listee's
Installation Instruction Manual for details.
NOTE: Not approved for public mode and not to be used as an evacuation signal for the hearing
impaired.
*Corrected 07-22-10 fm
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2016 Listing Expires June 30, 2017
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division