HomeMy WebLinkAboutCUP 154C; Pacific Bell Expansion; Conditional Use Permit (CUP) (32)c-
May 9, 1996
+-
TO: TERESA WOODS, ASSOCIATE PLANNER
FROM: Associate Engineer Quon
PROJECT ISSUES STATEMENT
PAC BELL CENTRAL OFFICE, CUP 154C
The Engineering Department has completed its review of the resubmitted project application for
completeness and/or engineering issues. The project application is now or was previously found
complete for the purpose of continued engineering review. The project application does contain
some engineering issues or concerns which remain to be resolved by the applicant. All
engineering issues should be fully resolved or addressed prior to resubmitting the project for our
review. The outstanding engineering issues or concerns are as follows:
1. The plans should include additional contour lines for the slope at the rear of the lot, all
the way up to the top of slope of the adjacent property. Also, please note the pad
elevation of the existing building behind this project.
2. There is inadequate aisle width and vehicle maneuvering space on both the lower and
upper paved areas, as the minimum width required for a parking lot aisle is 24’, and
adequate space is to be provided for a vehicle to turnaround at a dead-end aisle. We
suggest the project include additional grading to push the slope further to the rear to
create one large parking area and elimination of the dead-end aisles.
3. The drainage of the lot should be modified so that the concrete swale does not traverse
through the outdoor eating area.
4. Please identify what is proposed at the end of the new retaining wall at the east end of
the project.
Attached is a redlined check print set of the project. Please forward this plan set to the applicant
for corrections and changes as noted. The applicant must return this plan set with the corrected
plans to assist us in our continued review. If you have questions regarding any of the comments
above, please contact me at extension 4380.
KENNETH W. QUON
Associate Engineer
c: Bob Wojcik, Principal Civil Engineer