HomeMy WebLinkAboutHDP 01-06; St. Amour Residence; Hillside Development Permit (HDP) (8)TO:
FROM: David Rick -Assistant Engineer
DATE: April 17,2001
Mike Grim - Senior Planner
HDP 01 -06 St. Amour Residence
COMPLETNESS AND ISSUES REVIEW
Engineering Department staff has completed a review of the above-referenced project
for completeness and engineering issues of concern. All items needed for engineering
review are provided for determining the application as complete. Engineering issues
which need to be resolved or adequately addressed prior to staff making a
determination on the proposed project are as follows:
1. On the grading plan:
a. Provide a profile of the driveway centerline illustrating the vertical curve
using equal horizontal and vertical scale.
b. Specify that driveway is to be constructed to 'City Standard" GS-12.
c. Remove gravel bags and any other erosion control measures from the
plan. An erosion control plan will be required as part of your application
for a grading permit and all erosion control issues will be addressed at
that time.
d. Correct the drain outlet standard drawing reference from RSD 25 to RSD
27.
e. Plot easements described under 6, 7, 9, and 10 of the preliminary title
report.
f. Add the following note "Pool and spa requires separate permit".
2. The maximum driveway grade permitted is 14%. It is currently proposed at
15.5%. Revise plans accordingly.
3. The slope fronting the sidewalk must be graded such that the toe of the slope
is located outside the 4-foot public utility easement. Although the existing
slope may be encroaching into this easement, the toe should have been
graded outside this easement per the approved subdivision grading plans
(DWG 295-IA).
4. A grading permit will be required.
5. On the site plan, remove the broom finished color concrete from the 4-foot
public utility easement. This portion of the driveway shall match the 560-C-
3250 minimum concrete mix required within the public right-of-way.
If you or the applicant has any -questions, please either see or contact me at 602-2781.
DAVID RICK
Assistant Engineer
Engineering Development Services Division