HomeMy WebLinkAboutPIP 96-03; Hunsaker Carlsbad I; Planned Industrial Permit (PIP) (6)/-
From: ASSOCIATE ENGINEER, Clyde Wickham
Date: 11 September 1996
Re: PRE 96-42, BRIAN HUNSAKER
We have reviewed the Preliminary application and have a few comments
to add to this application.
1. The proposed driveways need to consider the required minimum
spacing (300') and conflicts with adjacent driveways. I have attached
a driveway plan that shows the accepted locations of driveways within
the specific plan for this project. The idea of sharing a driveway on
Loker Ave. may resolve one driveway issue. Additional driveways on
lots adjacent to this development should be shown. If the lot is vacant
you could assume the location will correspond to the driveway plan.
2. The width of the driveways is 30' minimum. 36' wide should be used
for this use considering the volume and type of traffic anticipated.
3. The multiple loading bays should be striped and identified.
4. Onsite drainage systems should incorporate NPDES standards.
5. Proposed grading including cut and fill or export quantities should be
shown.
6. Although the proposed parking looks fine a standard detail for typical
parking dimensions should be shown.
7. The existing sewer and drainage easements should be shown. The
access holes or cleanouts should also be shown.
I have attached a red - lined checkprint of the preliminary site plan for
your use to help identify the issues we have raised. I have also attached
ct this project. If you have any further
iew, please contact this office.
Associate Engineer
c: Principal Engineer, Land Use Review
Assistant City Engineer