HomeMy WebLinkAboutPS 01-63; Carlsbad Corporate Center; Sign Permits/Programs (PS) (2)*
City of Carlsbad
1635 Faraday Avenue
Carlsbad, CA 92008
(760) 602-4600
PLANNING APPLICATION # RI -08 63 REC'DBY \/rqu&
DATE Gn/147/
SIGN FEE
SIGN PROGRAM FEE
RECEIPT NO.
REVIEW FOR SIGN PERMIT
Planning Department
All plans submitted for sign permitdsign programs shall consist of a minimum of a site plan and sign
elevations containing the following information:
1. North arrow and scale.
2. Location of existing buildings or structures, parking areas, and vehicular access points to the property.
3. Location of all existing and proposed signs for the property.
4. Distance to the property line(s) for all proposed freestanding sign(s).
5. Provide an elevation for all proposed sign(s) which specifies the following:
A. Dimensions and area for all existing and proposed sign(s).
B. Materials the sign(s) will be constructed of.
C. Proposed sign copy.
APPLICANT MUST SUBMIT THREE (3) SETS OF SIGNBITE PLANS, A COMPLETED
APPLICATION FORM, AND THE APPLICATJON FEE.
The amlication - must be submitted prior to 4:OO u.m. Average processing time: 2 weeks
NAME OF PROJECT: Cpde LGmW ccs-pow- CEWbQ-
WbA: 58c8 IL U-Wb -L ADDRESS OF PROJECT: &
ASSESSOR PARCEL NUMBER: ZOq - O S0-Z-q
RELATED PLANNING CASE NUMBER(S): %IP - "7 -06 ISUP q7-05 . 50941 -0SCA
SlGN TYPE: (a) Commercial @ Industrial (c) Residential (d) Real Estate (e) Freeway (f) Marquee
(g) Community identity (h) Service Stn. Prices (i) Campaign
SIGN PROGRAM AND/OR
SPECIFIC PLAN CRITERIA Yes a No 0 Specific Plan Number
VILLAGE REDEVELOPMENT AREA Yeso No Requires VR Approval
SIGN ORDINANCE: Yeso NO 0
COASTAL ZONE: Yeso NO ' Coastal Permit Yes 0 NO [>(I
EXISTING SIGNS: Type Number Size (In Square Feet)
******t************t*t**t*******t** ****
Form 10 01/00 Page 1 of2
GWC . ._ ..
KMAARCE. &ENG. @I 004 @I 002/003
. .- -.
(a) Pole
@) Monument
(c) Wall
7 PERMITS ISSUED FOREXISTING SIGNS: Yes No (w Datc
TOTAL BUILDMO STlREET FRONTAGE ft.
EXISTTNG SIONAGE (SQ. ET.) (7 sq. ft.
WMAI"C3 SIGN ALLOWANCE AT PMSm sq. f3.
PROPOSED SIGHAGE (SQ. n.) sq. ft.
"NG SIGN ALLOWANCE AFTER PROPOSED SIGN sq. ft.
TOTAL STGNAGE ALLOWANCE pi?dl 9(bd o[u/IyAd , sq. a.
OWNER APPLICANT 1
Carlsbad Corporate Center TALC WIea de
MAILING AIlDRESS MAILING ADDRESS
One State Farm Plaza, E-10
CITYANDSTATE ZlP TELEPHONE CmA'NDSTAm Zd TELEPHONE
- -
z-33 IO Uf
PLANNER CHECK Lm:
1. Flcld ohcclc by planner.
2. Within maxim- Imgth, area,
3.
4. Location: 6. In right-of-way
Style consistent with Sign Program and/or Specific Plan criteria, if applioabla.
Ia visibility ttianglc at aomer 4
9 On roof
5.
6. Whenappr~ved
Pole and manument si- to bc checked by Bob Johnson, Traffic Enginear, for visibility issues.
APPROVED: Planner Date; 6-g-01
City of Carlsbad
1635 Faraday Avenue Carlsbad CA 92008
Applicant: CARLSBAD CORP CENTER
DescriDtion
PS010063
Amount
715.00
Receipt Number: ROO20811
Transaction Date: 06/11/2001
l543 M/ll/Ol 0002 01 02
CGF" 715 00
Transaction Amount: 715.00
PROJECT:
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
CARLSBAD CORPORATE CENTER 619 239 2313fpx
ENVIRONMENTAL GRAPHICS
CARLSBAD, CA
CITY SUBMITTAL #2
100% CONSTRUCTION DRAWINGS
1 1
SIGN TYPE LIST
PROJECT ALPHABETS
PROJECT ARROW
I
COLOR & MATERIAL
KEYNOTES
SPECIFICATIONS
DESIGN DRAWINGS
EXPLANATION OF
GRAPHIC SCHEDULE &
LOCATION PLAN
LOCATION PLAN
GRAPHIC SCHEDULE
1 1
I
I1
I11
JY
s1-s10
D1-D5
E1-E2
L1
G~-GG
1 1 1 1 I a I 1 1 I I 1
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE-22, 2001
2323 Broadway
studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
CONTENTS
PAGE NO. i
1 I I 1 I 1 1 I I 1 I 1 1 I I 1 1 1 1
PROJECT
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
Exterior Sign Type List
SIGN TYPE DESCRIPTION
Site Monument
Site Directional
Primary Building Address Numbers
Secondary Building Address Numbers
Primary Tenant Identification Guideline
Secondary Tenant Identification Guideline
Receiving Identification
DATE:
JUNE 8,2001
REVISIONS
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE
LIST
PAGE NO. I
1 1 I 1 1 I I I I 1 1 1 1 1 i 1 1 i 1
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019 Project Alphabets
DATE:
JUNE 8,2001
MYRIAD MM 565 Semibold 300 Condensed
ABCDEFGH I1 KLMNOPQRSTUVWXYZ
abcdefg hijklmnopqrstuvwxyz
1234567890&
MYRIAD MM 400 Regular 300 Condensed
ABCDEFGHIJKLMNOPQRSTUVWXYZ
a bcdefg hij klmnopqrstuvwxyz
1234567890&
REVISIONS:
JUNE 22,2001
2323 Broadway
studio 201
San Diego
California 92102
619 239 2312
619 239 2313fap
PROJECT
ALPHABETS
PAGE NO. I1
1 I 1 I I i I 1 1 I 1 1 1 1 1 1 I 1
Project Arrow
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313far
PROJECT
ARROW
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
PAGE NO. I11
I
I 1 I
FABRICATION
MATERIALS
I 1 1 1 I 1 1
@ Aluminum - fabricated aluminum boxes.
No exposted posts or attachments. Fine
sand and ease all square edges, paint and
prime all around.
@ Laminated glass - color to match
the architectural glass, Viracon
VS5-20 blue tint. Sumbit samples.
@ Pre-cast concrete.
@ Stone tile - applied to pre-cast
concrete block, color and finish to
be compatible with architectural
finishes.
@ Numerals/letters - 3” deep fabricated
.090 minimum aluminum with fine sand-
ed and eased edges all around. Prime
and paint all around color as described.
PAINT
COLORS
1
@ Light Beige-Frazee 8711W Misty Mica
@ Medium Beige-Frazee 8713W Kindling Wood
@ Dark Blue-Frazee AC143N Night Mission
@ Silver Metallic - To match Pantone 8001C
Semigloss finish
Semigloss finish
Matte finish
High gloss finish
VINn
COLORS
0 Clear receptive vinyl - to be flood-coated
color as described.
@ White - 3M 7725-20 Matte White
I I 1
PROJECT:
CARLSBAD
CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
KEY NOTES
@ Numerals/letters - 1” deep fabricated
.090 minimum aluminum with fine sand-
ed and eased edges all around. Prime
and paint all around color as described.
PAGE NO.
1 1 I 1 I I
SECTION 10400
1.00 GENERAL
1.01 SCOPE
i 1 1 I 1 1 1 1 1 1 I I I
IDENTIFYING DEVICES
Sign Contractor shall provide all necessary services, labor, materials, insurance, barricades, traffic control & safety devices, and products to fabricate and install all sign andor graphic items included in the documents which consist of Design Drawings and Specifications, Graphic Schedule and Location Plans.
Principal Items Include: Submittals/Prototypes with copy Engineering for Sign Structures Coordination with Related Trades Signs and Graphics, Complete and In Place
1.02 CONDITIONS & GENERAL REQUIREMENTS
A. DRAWINGS, DATA & SAMPLE SUBMITTALS: Submit Shop Drawings, Product Data and Samples for the work to be performed under this contract, within 21 calendar days from Award of Contract. Submit any requested prototypes within 35 calendar days from Award of Contract.
B. ENGINEERING AND CODE REQUIREMENTS: Sign Contractor shall provide all engineering of sign and graphic items including, but not limited to: footings, internal structure, electrical and mechanical parts. All items shall be engineered to satisfy all applicable codes & regulations and will be stamped by a Structural Engineer and display a wet seal with signature on all drawings submitted for approval and review. All items shall comply with the City of
Carlsbad Sign Ordinance.
C. TIMEFRAME & SCHEDULE SUBMITTALS:
1. SUBMITTAL SCHEDULE: Prepare a Schedule of Submittals in coordination with the Contract Schedule for the Owner's Representative review. Provide two (2) copies of the Submittal Schedule when it is accepted.
2. QUANTITY & MEDIA: Provide two (2) sets of each submittal plus as many sets as the Contractor wants returned. Provide two (2) samples of sufficient size and quality to show the full ranges of color, texture and pattern. The Owner's Representative will return one sample with review comments. Label the back of each sample with it's corresponding color or vinyl number.
PROJECT:
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fau
SPECIFICATIONS
PAGE NO
1 1 1
3.
4.
5.
6.
7.
8.
9.
10.
I I 1 i 1 1 1 I I I
ORGANIZATION: Provide an index for each submittal; number and list the submitted items in order of their Specification Sections and paragraph. List names of the contributing Subcontractors. For submittals in booklet format, bind this information in the front of the booklet.
APPROVAL: Mark each set of the submittal to show that it has the Contractor's review and approval in accordance
with General Con&tions.
START OF WORK:
Manufacture and fabricate signs based on the review comments from the Owner's Representative.
Do not begin without the review comments on that portion of the Work. Do not begin any fabrication
of parts, panels or pieces until all approvals, including prototypes have been submitted and returned
approved.
SHOP DRAWINGS: Sign Contractor shall provide complete structural drawings with supporting calculations and shop drawings signed and approved by Structural Engineer, to scale, of all items showing both exterior and interior construction and full size drawings of all details affecting visible appearance. Sign Contractor shall submit shop drawings to WND, Inc. for review and approval prior to commencement of start of work.
FORMAT:
Present information required on Shop Drawings in a clear and thorough manner. Reference individual drawings to the details, schedules and page numbers of the Drawings.
DELIVERY: Deliver or fabricate field samples at a location selected by the Owner's Representative. Fabricate
each sample complete and including copy. Remove samples at the conclusion of the work.
CONTRACT SCHEDULE:
Submit three (3) copies of the Contract Schedule, in the correct form and having general content
acceptable to Owner's Representative, with preliminary draft of the application for payment. No Application for Payment will be processed nor shall any progress payment become due until the Contract Schedule is properly submitted and accepted by the Owner's Representative.
FORM: The Contract Schedule shall be a CPM time scaled, network diagram or bar chart showing continuous flow from left to right. The specific calendar days and dates shall be clearly and legiblyshown for the start and finish of each work activity and the critical path shall be clearly shown if a bar chart diagram is used.
I 1
PROJECT:
CARLSBAD
CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92 102
619 239 2312
619 239 2313fax
SPECIFICATIONS
PAGE NO. s2
1 1 1 I I I I I 1 I 1 1 I I I 1 i 1 I
1 1. ACTIVITIES: A minimum of seven (7) days shall be allotted in the schedule for WND, Inc./Owner to review each
submittal.
12. PROGRESS UPDATES: Prepare and submit to Ownerk Representative an updated Contract Schedule once each month, or as
mutually agreed. The updated Contract Schedule shall accurately reflect all previously completed
and in-progress work activities.
All sign copy and graphics shown in the documents is for reference only. Sign Contractor shall produce computer generated patterns. Submit two (2) sets of copy pattern outputs to WND, Inc. for approval, with sign panel outline shown 2 pt. min. preferably using solid CODY. Scale of patterns to be agreed to with WND, Inc. prior to output (minimum 1/4 size/maximum full size). Provide copy patterns for sign types 1-1,2-1A, 2-2A, 2-3A, 2-4A, 2-4B, 3-1,4-1, and 7-1.
Submit samples of the surface sheen and treatment of all exposed materials, such as concrete, metal, plastic and vinyl. Submit two (2) samples of each, on an 8'' x 8" (min.) material or as approved by WND, Inc.
13. COPY PATTERNS:
14. FINISH SAMPLES:
15. HARDWARE SAMPLES: Submit two (2) samples of all exposed hardware such as glides, hinges, locks and fasteners.
16. PAINT AND SILK-SCREEN INK COLOR SAMPLES: On 8'' x 8" actual material that paint or ink is being applied to, provide two (2) samples of each color, vinyl, maps, printing process, to accurately depict the material or process to WND, Inc. for approval.
17. PAINT MATERIALS: Submit technical specifications for approval of all proposed paint and finishing materials to meet or
exceed the quality of the following:
a. As a primer on galvanized or bare metal surfaces use an etching primer, as recommended by the paint manufacturer.
b. As an undercoat use a primer sealer, as recommended by the paint manufacturer.
PROJECT:
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
studio 201
San Diego
California 92 102
619 239 2312
619 239 2313fax
SPECIFICATIONS
c. After proper sanding and cleaning, apply a minimum of two (2) coats of premium quality
two-step linear polyurethane, which meets all California VOS environmental requirements.
PAGE NO
1 1 I I I I I I I I I 1 I 1 1 1 1 I 1
18. PROTOTYPES: These must be approved by WND, Inc. prior to fabrication of any parts, panels or posts, etc. Submit prototypes of any details that may affect design intendexterior appearance, such as panel edge treatment. Submit one (1) sample of each of the following: Provide one full size fabricated number, painted as indicated on the drawings for sign type 4, one partial full size sample of the glasdpanel channel for sign type 1. Submit prototypes to WND for approval prior to proceeding with
production. Samples may be kept by WND for record purposes.
D. PARKING & STORAGE AREAS:
Coordinate parking and storage areas on site with Facility Manager.
E. GUARANTEE:
1. All Product and Work shall be guaranteed for one (1) year from acceptance against cracking, crazing, peeling, blistering and other defects in materials and/or workmanship.
All vinyl shall be guaranteed for five (5) year outdoor durability. 2.
3. Furnish a one (1) year warranty, warranting that the factory applied linear polyurethane finishes will
not develop excessive fading or excessive non-uniformity of color or shade, and will not crack, peel,
pit, corrode or otherwise fail as a result of defects in material or workmanship within the following
defined limits. Upon notification of such defects, within the warranty period, make necessary repairs or replacement at the convenience of Owner.
a. Excessive Fading: A change in appearance which is perceptible and objectionable as determined by WND, Inc. when visually compared with the original color range standards.
b. Excessive Non-Uniformity: Non-uniform fading to the extent that adjacent panels have a color difference greater than the original range of color.
c. Will Not Pit or Otherwise Corrode: No pitting or other type of corrosion, discernible from a &stance of lo', resulting from the natural elements in the atmosphere at the project site.
1.03 TEMPORARY CONTROLS
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92 102
619 239 2312
619 239 2313far
SPECIFICATIONS
A. INTERRUPTIONS TO UTILITIES, SERVICES, AND ACCESSES:
No existing utility services shall be interrupted at any time by the Contractor, Required shutdowns shall be
scheduled at least one week prior to actual shutdown. The operation of valves, switches, etc. will be
coordinated with the Facility Manager.
PAGE NO. s4
1 I I
B.
1.04
A.
1.05
A.
2.00
I I I I I I 1 I I I I I 1 i 1 I
TRAFFIC CONTROL, BARRICADES AND LIGHTING: Install, maintain and remove all required traffic provisions and safeguards. Provide adequate barriers around the work to define exit ways and limits of the construction area, and to contain dust and debris within the construction area. Maintain warning lights, temporary walkways, traffic controls and the like, as may be required by the Owner to give adequate warning and protection for pedestrian and vehicular traffic.
QUALIFICATIONS
QUALIFICATIONS OF SIGN AND GRAPHICS TRADE CONTRACTOR: Employ a sign and graphics specialist with minimum five (5) years experience to manufacture, fabricate, assemble and install work of this Section, who is able to demonstrate experience and completed project record to the satisfaction of WND, Inc. Submit two (2) copies of five (5) similar completed projects, in size & cost, with contact information for each with bid.
EXISTING CONDITIONS
VERIFICATION OF EXISTING CONDITIONS AND DOCUMENTS: Sign Contractor shall visit the Site to inspect all existing conditions and to verify all dimensions, which are related to the fabrication and/or installation of sign or graphic items. Sign Contractor shall thoroughly review these documents, checking conditions and dimensions shown. Notify WND, Inc. of any discrepancies in the documents. Written dimensions shall have precedence over scaled dimensions. The Plans and Drawings shall be followed for quantity of sign items, message wording and references to the Drawings. The Specifications shall have precedence over information noted on the Drawings.
MATERIALS AND PRODUCTS
MATERIALS
A. CONCRETE: Refer to and follow Section 303-6 of the Standard Specifications (1994 Green Book) for public work
construction. Unless specified otherwise on drawings, all concrete on the project shall be a standard mix of
natural color with a medium pea gravel, minimum 325Opsi. Provide flat, smooth faced metal or fiberglass
forms as required in the sizes and shapes indlcated on the drawings. Make sure concrete is vibrated well in
forms to reduce air pockets.
All concrete will be poured with at least 48 hours notice to the Facility Manager. Concrete will not be re- tempered; concrete cannot be placed if more than 90 minutes old. A mechanical vibrator is required on most pours.
PROJECT:
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SPECIFICATIONS
The contractor is responsible for protection of work. All work deemed unsatisfactory or damaged will be
Contractor will submit a design mix for approval, five (5) days prior to scheduling any concrete pours. replaced by the contractor at his expense within ten (10) days of notification by the Owner's Representative. PAGE NO. s5
1 1 I I 1 1 I 1 I I 1 1 I I 1 -1 1 I 1
B.
C.
D.
E.
F.
G.
H.
I.
ALUMINUM PLATE: For exterior surfaces of sign, provide 1/8" flat panel (not rolled stock), alloy #3003, H14 mill finish or as required to meet fabrication or engineering requirements.
ALUMINUM "U" CHANNELS:
Provide aluminum of the necessary shape, wall thickness and alloy to meet fabrication, engineering and code
requirements .
GLASS: Laminated glass, color to match the architectural glass, Viracon VS5-20 blue tint. Submit samples.
HARDWARE: Provide and install all incidental hardware necessary for the proper functioning of the sign. Hardware shall be stainless steel.
FASTENERS: Exposed fasteners shall be permitted only where specifically stated in the Drawings, and shall be stainless steel, and painted or finished to match adjacent surfaces, unless otherwise specified.
STAINLESS STEEL ITEMS: Provide a low carbon content stainless steel, alloy #302 or #304 of 18 gauge or thickness as necessary. If decorative or readily visible, verify finish and direction of grain with WND, Inc. or as stated on the Drawings.
VINYL: Shall be 3M premium grade vinyl unless otherwise specified, with a minimum five (5) year exterior and seven (7) year interior guarantee.
TILE:TBD
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SPECIFICATIONS
PAGE NO.
1 1 I I i I I I I 1 1 1
2.02
A.
B.
C.
D.
3.00
3.01
A.
FABRICATION
GENERAL REQUIREMENTS:Contractor shall provide and pay for underground locator service to identify
all subsurface utilities prior to start of excavation.
POST, PANELS & BOXES: All post and panels shall have minimal seamed construction with all joints finished smooth. No exposed fasteners shall be used except for access panels where approved to be attached with pan head screws painted to match adjacent surface/material. To prevent corrosion due to electrolysis on metal signs, separate all ferrous and non-ferrous metals with neoprene or vinyl spacers, and stainless steel fasteners.
COPY APPLICATION: The Project Alphabets are AdobeTM fonts which the Contractor shall obtain at their own cost and shall be used for all copy applications, except as otherwise noted on the Drawings. All letter forms shall follow these alphabets, and the size and placement of copy shall follow the dimensions and spacing indicated on the Design Drawings and/or approved copy patterns. Letter spacing shall conform to standards shown and kerned optically to the acceptance of WND, Inc. Lines of copy shall be straight and parallel to the sign format, unless otherwise specified. Edges of letters, number and symbols shall be smooth and continuous, with straight and curved portions reproducing the original forms exactly, with corners sharp and true. Pay particular attention to rounded letter forms, as these extend slightly above and below the normal line of copy. All forms shall be free of ticks, line waiver, discontinuous curves and other imperfections.
FABRICATED NUMERALSLE'TTERS: All fabricated letters to be of sufficient depth. All seams sauter filled and finished prior to painting. No exposed fasteners.
EXECUTION
FINISHING:
PAINTING: Surfaces of all items requiring a painted finish shall be properly prepared. Tool marks and other imperfections shall be filled and sanded or buffed out. Joint filler shall be sanded flush and smooth. Clean surface before applying paint or letter by removing all chalk, dust, dirt grease and oils. Sufficient primer coats or undercoats shall be applied to achieve a smooth and uniform surface. All painted items shall be
spray painted, following the paint manufacturer's recommendation concerning thinning and application. Apply additional coats when undercoats, stains or other conditions show through the color coat of paint, until paint is of a uniform finish, color and appearance.
1 I I
PROJECT
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
I
SPECIFICATIONS
PAGE NO. s7
1 1 1 i I I I I I I 1 I 1 I 1 I
PANELS:
1. Linear Polyurethane Paint: Provide pre-treatment and primer in accordance with manufacturer's
recommendation. Add ultra-violet inhibitors to paint subject to sunlight exposure.
2. Clear Linear Polyurethane Finish: Provide pre-treatment, primer and finish coat in accordance
with manufacturer's recommendation. Apply 1.5 to 2 mils to dry film thickness.
3. Graffiti Coat: Apply a non-yellowing, clear, low gloss hard film suitable for application on Linear
Polyurethane on metal as a finish coat over all signs. Follow manufacturer's instructions on number
of coats for exterior use where spray can painting may be expected. Spray application per
manufacturer's instructions. Verify gloss with WND, Inc. prior to fabrication. Supply WND, Inc. with written directions on graffiti removal procedures, per manufacturer's instructions. Use Dunn Edwards Ultrashield or equivalent.
B. INDIVIDUAL CUT-OUT LETTERS: Provide individual cut-out letters from acrylic, aluminum or stone in thickness and colors as noted on the Drawings, Computer Laser Cut or Water-Jet Cut as provided by Architectural Fabricators, Sacramento, CA or equivalent. The edges of all letters shall be fine sanded smooth without imperfections to match the face surface/texture or as noted on Drawings.
3.02 INSTALLATION
A. JOB CONDITIONS:
Installer shall examine the site condition, structures, the substrata and all other condltions under which the
specialty signs are to be installed, and submit notes of Conditions detrimental to the proper and timely completion of the Work. The Work shall not proceed until satisfactory conditions have been corrected.
B. EXCAVATION: 1. Excavated earth, spoils and debris shall be exported from site and disposed of off-site to a legal disposal site.
2. Over excavated sites made deeper than indlcated on Drawings, may not be backfilled. Upon
determination and with approval by the Owner's Representative, fill void with concrete as specified for foundation, at no additional expense to the Owner.
I 1 1
PROJECT
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SPECIFICATIONS
3. Contractor shall provide all equipment, barricades, trench plates, traffic control and related safety equipment as necessary to leave the site in a safe condition for non work hours use. Exposed trenches and open excavations must be properly secured prior to leaving the job site each day.
PAGE NO.
1 1 I I 1 I I 1 I I I I 1 1 1 i I I
4. Work performed over landscaped and exposed irrigation area, may require the contractor to provide
protection as necessary to prevent damage.
C. SIGN INSTALLATION: Shall be carried out in a neat and proper manner equal to the finest quality standards of the industry.
D. LOCATION DRAWINGS: Shall be followed when installing signs and graphic items. Item numbers, which are found in the Graphic Schedule, identify specific sign units and their locations. Drawings show general location for each sign. Specific locations shall be determined by walking the Site with WND, Inc. Sign Contractor shall provide removable numbered water-resistant stakes or labels as applicable for each sign to be placed at time of walk- through. Double stake to indicate width of sign and orientation to roadway. Sign Contractor shall also field measure selected locations and note dimensions on their plan, should stakes be accidentally removed prior to installation.
E. INSTALLED SIGNS: Shall be clean, properly aligned, level and true to line and dimension, flush to surface or as detailed and specified, free of excess visible adhesive, if used. Damage to sign or surrounding surfaces or other imperfections will not be accepted. Any code required labels and shut-off switches to be on exterior of sign shall be concealed from normal viewing and all other labels shall be located inside the sign enclosure.
F. PIN FASTENERS: Where pins or other mechanical fasteners are used, also provide silicone or epoxy adhesive to prevent unauthorized removal of signs. All fasteners, structures and units must be structurally sound and comply with all applicable code requirements and restrictions, including state seismic regulations.
G. PROTECTIVE MATERIALS: All wrappers, coverings, identifying stickers, papers, etc. shall be removed from the sign itself and the Site at the completion of installation.
3.03 FINAL CORRECTIVE WORK
Damage to signs or surrounding surfaces shall be repaired to the satisfaction of WND, Inc., at no additional cost to
the Owner.
3.04 CLEANING AND PROTECTION
A. During the process of work, remove daily all discarded materials, rubbish, cans, rags, etc. from the Site.
B. Upon completion of painting, clean or repaint all paint splattered signs and adjacent surfaces. Remove splattered paint by proper methods of washing and scraping, using care not to scratch or otherwise damage
finished surfaces.
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SPECIFICATIONS
PAGE NO. s9
1 1 I 1 I 1 1 I I I 1 1 1 1 I I 1 I
C. At completion of installation, clean all sign surfaces in accordance with manufacturer's instructions. Protect units from damage until acceptance by the Owner. Repair or replace damaged units as directed at no additional cost to the Owner.
Sign Contractor shall:
1.
2.
Check all items for correct placement.
Clean, oil andor polish as recommended by manufacturer's instructions.
3. Remove all crating debris from the Site and leave premises in clean condition.
4. Take special precautions to protect finishes.
PROJECT
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
5. Clean sign material using only cleaners and methods in accordance with the manufacturer's instructions.
6. Repair and repaint building surfaces, which are damaged by Sign Contractor's workers as a result of installation of sign items.
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fau
SPECIFICATIONS
PAGE NO. SI0
PROJECT
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
Corporate
Center
DATE:
JUNE 8,2001
ELEVATION 1-1 SHOWN
35 Sq.ft. maximum per sign face allowed
28.5 Sq.ft. per sign face shown
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fsx
SIGN TYPE 1
SITE
MONUMENT
Scale: 1/2" = 1'-0"
PAGE NO. Dl
1 I 1 I 1 1 1 1 1 1 I 1 1 I I I 1 1 I
PROJECT:
CARLSBAD CORPORATE CENTER
Mow strip
to extend
2" beyond
sign base
4"
PROJECT NO:
2019
DATE:
JUNE 8,2001 PLAN VIEW
I EQ 4EQI REVISIONS:
JUNE 22,2001 i 7- I I 1 Carlsbad
Corporate
Center I 5830 2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax n Typical all t
blocks sign :;'-I
type1 1 -A- I
requirements I Foundation
as required
to meet
structural
SIGN TYPE LEFT RIGHT
SITE
MONUMENT -"* ,1' *"I / /
, ,./ 'T
Foundation to align with edges of concrete
Scale: 1/2" = 1'-0"
PAGE NO.
ELEVATION
Dl.l
1 I 1 1 1 1 I 1 I I 1 1 1 1 1 I 1 1 I
LEFT
Q
PLAN VIEW
All copy & numbers
to be vinyl flood coated
to match Paint Color 9.
5830
PROJECT:
CARLSBAD CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Dieeo
Carkbad /I -
California 92102
619 239 2312
619 239 2313fax
Typical Center all blocks SIGN TYPE
Corporate -"" I/ 1 \ SITE
MONUMENT
RIGHT ELEVATION bo Scale: 1/2" = 1'-0"
PAGE NO.
D1.2
1 I 1
- . c . 0 ,
0 0
I 1 1
.---- . . .
1 1 I 1 I 1 1 I I
---. . .
I t .
I
\
\ rl---l I1 I It-7 I
.
1 I 1 1
. *__-*
Laminated glass to be two 1"
thick pieces permanently
adhered together. Glass to
be permanently fastened or
adhered into channel. Channel
to be lined with neoprene. Caulk
around edges of glass as needed.
Channel to be watertight. Sign panels to be fabricated
aluminum boxes with VHB
tape and concealed set
screws. No exposed fasteners. . . . - c - c
Minimal seam
between tiles.
Grout to match
tile - submit sample.
---_---
Scale: 1 1/2" = 1'-O"
Permanently attach all
fabricated aluminum
boxes to tiled concrete
Submit shop drawing.
DETAIL
Align edges of sign panel
and concrete block flush.
PROJECT:
CARLSBAD CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE
SITE
MONUMENT
Concrete blocks to be'
adhered stone tiles. ELEVATION
Miter edges and corners
all around.
faced with permanently Scale: 1/2" = 1'-0" Scale: As Noted
PAGE NO.
D1.3
1 I I 1 I 1 I I I
7 3/4"
- 5 COPY
I &Panel
I
3 3/4" H
I I I 1 1 1 I I
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN lYPE 1
SITE
MONUMENT
COPY LAYOUT Scale: 1 11211 = l'-Otl
PAGE NO. D1.4
1 1 I I I 1 1 I 1
7 3/4"
- 5 COPY
I &Panel
I
Future Copy
NIC
COPY LAYOUT FOR FUTURE COPY
1 I I I I I
Center
1 I I I
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE
1
SITE
MONUMENT
PAGE NO.
D1.5
1 1 I
+ 5818
1' 5830 1' All Deliveries
1 1 I
2'-611 above grade
I 1 1 1 1 1 1 1 I 1 I I 1
ELEVATION 2-2A SHOWN
6 Sq.ft. maximum per sign face allowed 6 Sq.ft. per sign face shown
PROJECT:
CARLSBAD
CORPORATE CENTER
PROJECT NO
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 2
SITE
DIRECTIONAL
Scale: 1/2" = 1'-0"
PAGE NO D2
1 1 I I 1 1 1 1 1 1 1 I 1 1 I 1 I 1 1
“B” Face of Sign
Mow strip to
extend 2” 4” beyond sign base
and sign Dane1
“A” Face of Sign
PLAN VIEW
EQ EQ tttt
Foundation as required
requirements
“ ,.” /-- ’ . -
df s” RIGHT LEFT to meet structural
Foundation to align with edges of concrete
ELEVATION
PROJECT:
CARLSBAD CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 2
SITE
DIRECTIONAL
Scale: 1/22” = 1’-0”
PAGE NO.
D2.1
I I I
P I
p
fabricated aluminum
I 1 1
Po
1 I I I 1 1
PLAN VIEW
All copy, arrows & numbers
to be vinyl flood coated
to match Paint Color 9.
ii
RIGHT LEFT
1 1 1 I I 1 I
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fau
SIGN TYPE
2
SITE
DIRECTIONAL,
Scale: 1/2" = 1'-0"
PAGE NO.
D2.2
1 1 I 1 I 1 1
- - - - - - .
Arrow & Cap
Typical
Center
2-1A: Typical Dimensions Shown
'65830 2"
2-2A
2-3A
COPY LAYOUTS
1 1 1 I I 1 I 1
__ ... -~
Panel I
2-1B: Typical Dimensions Shown
~ +..818 2"
1 9 1/21' -it to
Zrada y
2-2B
All copy for sign type 2 is 3". Some conditions
may require condensing. Supply copy patterns.
Space between related lines of copy is 1/2".
Space between unrelated lines of copy is 2".
I I I I
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE
2
SITE
DIRECTIONAL
Scale: 1" = 1'-0"
PAGE NO.
D2.3
I 1 1 I I 1 I 1 1
2-4A
'I - /t\ All Deliveries
I1 ~
2-5A
COPY LAYOUTS
/t\ 5830
?,:+it to
Camino Real
2-4B
1 1/21' ' e?:;ino Real
I 11
2-5B
1 1 I i
PROJECT:
CARLSBAD
CORPORATE CENTER
PROJECT No:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE
2
SITE
DIRECTIONAL
Scale: 1" = 1'-0"
PAGE NO.
D2.4
1 I I I I I I I I 1 I I
T581 8
I I I 1 I I 1
DETAIL
Scale: 1" = 1'-0"
Pin mount to the building surface as
required with a minimum of 3 stainless
steel pins per letter. Mount with vinyl or
stainless steel standoffs l/W for moisture
drainage. Fabricator to verify building
material and structure behind signage
with Architect and Engineer accordingly.
E Center Vertically & Horizontally on panel
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 3
PRIMARY
BUILDING
ADDRESS
NUMBERS
BUILDING A WEST ELEVATION
Scale: 1/16" = 1'-0" Scale: As Noted
PAGE NO. D3
I 1 1 I I I I i I I I . --- --_ 1 I 1 1 I . . 1 I 1
. . - c -__---
* - ---=- -- 0- * * BUILDING A NORTH ELEVATION *
Scale: 1/16" = 1'-0"
DETAIL
Scale: 1" = 1'-0"
Pin mount to the building
surface as required with a
minimum of 2 stainless steel
pins per letter. Mount with
vinyl or stainless steel
standoffs 1/8" for moisture
drainage. Fabricator to verify
building material and struc-
ture behind signage with
Architect and Engineer
accordingly.
I
I
I
I
I
I
I
I
I
I
I
1
8
8
t
t
t
%
\
t
1
8
1
1
u
I
I
I
I
I
I
I
I I I sgia - - - - -6 I I
I
I
I
I
8
PROJECT
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 4
SECONDARY
BUILDING
ADDRESS
NUMBERS
Scale: As Noted
PAGE NO. D4
1 1 I I 1 I 1 I 1 l I 1
DETAIL
Scale: 1" = 1'-0"
PRIMARY TENANT IDENTIFICATION GUIDELINE
The copy typestyle to match tenants corporate graphic
standards or use the project typestyles. Tenant may also use
their logo. Maximum size of logo is 24" x 36". If a tenant does
not have a logo/logotype, project typestyles shall be used.
Color of logo/logotype to be a dark/contrasting color against
building surface. Verify color and layout with Owner prior to
fabrication and installation. The project blue may be used if
desired.
Pin mount to the building surface as required with a minimum
of 4 stainless steel pins per letter. Mount with vinyl or stainless
steel standoffs 1/8" for moisture drainage. Verify placement on
site with Owner's representative. Tenant shall submit layout for
Owner approval prior to fabrication. Fabricator to verify build-
ing material and structure behind signage with Architect and
Engineer accordingly.
I 1 I 1 I I 1
t PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE
5
PRIMARY TENANT
IDENTIFICATION GUIDELINE NIC
Scale: As Noted
PAGE NO.
D5
1 I I I I I I 1 1 I I I I 1 I 1 I I 1
BUILDING A NORTH ELEVATION
Quantity 1, 50 Sq.ft. maximum sign allowed, shown with dashed lines
24" letters maximum allowed
24" x 36" logo maximum permitted 30 Sq.ft. shown with 24" letters
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego California 92102
A 619 239 2312
619 239 2313fax
SIGN 'TYPE 5
PRIMARY
TENANT
IDENTIFICATION
GUIDELINE
BUILDING A WEST ELEVATION
Quantity 1, 50 Sq.ft. maximum sign allowed, shown with dashed lines
2411 letters maximum allowed
24" x 36" logo maximum permitted
30 Sq.ft. shown with 2411 letters
Scale: 1/16" = 1'-0"
PAGE NO. D5.1
1 I i I I I I 1 I I I I I I 1 1 1 I 1
. PROJECT:
JUNE 22,2001
BUILDING B SOUTH ELEVATION
Quantity 1, 50 Sq.ft. maximum sign allowed, shown with dashed lines
24" letters maximum allowed
24" x 36" logo maximum permitted
30 Sq.ft. shown with 24" letters
BUILDING B WEST ELEVATION
Quantity 1, 50 Sq.ft. maximum sign allowed, shown with dashed lines
24" letters maximum allowed
24" x 36" logo maximum permitted
30 Sq.ft. shown with 24" letters
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 5
PRIMARY TENANT
IDENTIFICATION
GUIDELINE
Scale: 1/16" = 1'-0"
PAGE NO. D5.2
I I I 1 1 1 1 I I 1 I 1 I I I 1 _---- - - .
4 . . 5
- - - r --_--
BUILDING A NORTH ELEVATION
Scale: 1/16" = 1'-0"
SECONDARY TENANT
IDENTIFICATION GUIDELINE
Secondary Tenant Identification to be
white vinyl applied second surface to the
glass adjacent to the tenant's entrance. The
copy typestyle to match tenants corporate
graphic standards or use the project
typestyles. Tenant may also use their logo.
Maximum size of logo/logotype is 4". If a
tenant does not have a logo/logotype,
project typestyles shall be used.
In addition, 2" letters may be placed 1 1/2"
below the tenant identification indicating
the Suite location of the tenant. Submit lay-
out and preferred location for Owner
approval prior to fabrication.
e # 4
*
n II 5818 I I
DETAIL
Scale: 1/8" =
\
1'.
0
* * 6 -. Typical location shown --111
# #
I
I
1
8
1
I
I
I
I
I
I
I
I
I
#
8
4
4 *
I 1 1
PROJECT:
CARLSBAD
CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 6
SECONDARY
TENANT
IDENTIFICATION
GUIDELINE
Scale: As Noted
PAGE NO. D6
1 1 I I I I i 1 I
E 5818
4" I 6-1 DELIVERIES
DETAIL
Scale: 1" = 1'-0"
I 1 I I I 1 I 1 I I
Pin mount to the building surface
as required with a minimum of 2
stainless steel pins per letter. Mount
with vinyl or stainless steel stand-
offs 1/811 for moisture drainage.
Fabricator to verify building materi-
al and structure behind signage
with Architect and Engineer accord-
ingly.
5 Center Vertically & Horizontally on panel
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
SIGN TYPE 7
RECEIVING
IDENTIFICATION
Scale: As Noted
BUILDING A SOUTH ELEVATION
Scale: 1/8" = 1'-0"
PAGE NO. D7
I I
EXPLANATION
1 I 1 I
A. EXPLANATION OF GRAPHIC SCHEDULE
1 I 1
1. SIGN TYPE ITEM NUMBER:
Each sign or graphic item has been assigned an identifying number.
a. Example:14-3
1 1 1 1 I I 1
The first number within corresponds to the sign type. The sign types are defined in
the sign type list on the previous page. The second number indicates a sign with
unique "text", symbol, arrow or other graphic elements.
2. QUANTITY: The total quantity of that sign item to be fabricated at this time. The
sign contractor must check all quantities shown for accuracy.
3. TEXT: The exact wording, capitalization, punctuation, symbol and arrow use.
Copy lines are shown in sequence as they appear on the copy layout. Refer to
copy layout for actual position and size of copy.
4. LOCATION: Refers to the architect's plan sheets for actual location of an item.
Item numbers are in lozenge shapes, with a line connecting the lozenge to sign
face "A".
5. DESIGN: Sheet number(s) of the drawingb) that show the design; size, shape,
materials, colors, finishes and other pertinent information.
6. SPECIAL NOTES: Miscellaneous Information
S/F denotes Single Faced sign
D/F denotes Double Faced sign
PROJECT:
CARLSBAD CORPORATE CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92 102
619 239 2312
619 239 2313fax
EXPLANATION
OF GRAPHIC
SCHEDULE &
LOCATION PLAN
PAGE NO
El
1 1 1 1 1 1 I I I 1 1 1 1 1 I 1 1
7. DEFINITIONS:
"TBD" To Be Determined - Copy message not available at this time, but to be included in
contract.
(BLANK PANEL) Blank finished face of sign, not to receive copy at this time.
( ) All information in parentheses not in actual copy, but for user's information only.
(<A) = 45" Left Arrow
(A>) = 45" Right Arrow
B. EXEXANATION OF ITEM NUMBER SYMBOL USED ON LOCATION PLANS
The lozenge shape is used on location plans to identify each item of signage and/or graphic elements.
The second number indicates a
specific sign with unique text
or graphic elements.
The first number refers to the sign
type; a group of signs similar in
shape, materials or function.
For a Single Faced sign the connecting
line indicates the face on whch the
message is displayed. The line always - indicateds face "A". On multi-faced - Sign
signs "B", "C".. .progress from "A" face
clockwise.
PROJECT:
CARLSBAD
CORPORATE
CENTER
PROJECT NO:
2019
DATE:
JUNE 8,2001
REVISIONS:
JUNE 22,2001
2323 Broadway
Studio 201
San Diego
California 92102
619 239 2312
619 239 2313fax
EXPIANATION
OF GRAPHIC
SCHEDULE &
LOCATION PLAN
PAGE NO. E2
I I 1 I I I 1 1 I I 1 1 1 I I I I I
~~ .-
/ /
Mot & LINE ONlV
____
El CAMINO REAL
aca-
UXm
WB IENTWORTH ALIFORNIA .L.L.C
"err m LI
1
1 I I 1
SIGN TYPE
ITEM NUMBER Qn. TEXT
1 1 1 1 1 1 1 1 I
LOCATION DESIGN
PLAN SHEET SPECIAL NOTES
1 I
page G1
1 - 1A 1 5818 Carlsbad
5830 Corporate
Center
LP1 D1 Double Faced sign
This sign shall be staked and the location
approved by a representative of the Owner
prior to fabrication and installation. This
sign shall be located appropriate distance
from the public right-of-way to ensure
adequate sight distance, outside of a 25’
view triangle.
1 - 1B 5818 Carlsbad
5830 Corporate
Center
LP1 D1
2 - 1A 1 3 Carlsbad
Corporate
Center
LP1 D2 Double Faced sign
This sign shall be staked and the location
approved by a representative of the Owner
prior to fabrication and installation. This
sign shall be located appropriate distance
from the public right-of-way to ensure
adequate sight distance, outside of a 25’
view triangle.
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WIEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
I I I I I I I I I I I I I I I I I I I
SIGN TYPE LOCATION DESIGN TEXT PLAN SHEET SPECIAL NOTES page G2 ITEM NUMBER Qrr.
2 - 1B t Carlsbad LP 1 D2
Corporate
Center
2 - 2A 1 + 5818
1' 5830 1' All Deliveries
LP1 D2 Double Faced sign
This sign shall be staked and the location
approved by a representative of the Owner
prior to fabrication and installation.
2 - 2B t 5818
Exit to Faraday
LP 1 D2
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WIEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
1 I 1 I I I I I 1 I 1 I I 1 I 1 I I 1
SIGN TYPE
ITEM NUMBER Qn. TEXT
LOCATION DESIGN
PLAN SHEET SPECIAL NOTES
2 - 3A 1 71 5830
71 Deliveries-5818
IT Deliveries-5830
LP1 D2 Single Faced sign
This sign shall be staked and the location
approved by a representative of the Owner
prior to fabrication and installation.
2 - 3B (BLANK) LP1 D2
2 - 4A 1 5818
~ ~~~~
LP 1 D2 Double Faced sign
This sign shall be staked and the location
approved by a representative of the Owner
prior to fabrication and installation.
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
I I I I I I I I I I I I I I I I I I I
SIGN TYPE
ITEM NUMBER cm. TEXT
LOCATION DESIGN
PLAN SHEET SPECIAL NOTES page G4
2 - 4B 'l' 5830 'l' Exit to
El Camino Real
LP1 D2
~ ~~
2 - SA 1 t 5818
t 5830 'l' All Deliveries
LP1 D2 Double Faced sign
This sign shall be staked and the location
approved by a representative of the Owner
prior to fabrication and installation.
2 - 5B 1 Exit to
El Camino Real
LP 1 D2
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WIEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
1 1 1 1 1 1 1 1 1 I 1 1 1 1 1 1 1 1 1
SIGN TYPE
ITEM NUMBER qn. TEXT
LOCATION DESIGN
PLAN SHEET SPECIAL NDTES
3-1
____
1 5818 LP1 D3
3-2 1 5830 LP1 D3
I 4-1 4 5818 LP1 D4
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
1 1 1 1 1 1 1 1 I 1 1 1 I 1 I I 1 1 1
SIGN TYPE
ITEM NUMBER Qrr. TEXT
LOCATION DESIGN
PLAN SHEET SPECIAL NOTES page G6
4-2 2 5830 LP 1 D4
5-1 1 (FUTURE TENANT - NIC) LP 1 D5 Information included as guideline only.
5-2 1 (FUTURE TENANT - NIC) LP 1 D5 Information included as guideline only.
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SIGN TYPE
ITEM NUMBER gn. TEXT
LOCATION DESIGN
PLAN SHEET SPECIAL NOTES
5-3 1 (FUTURE TENANT - NIC) LP1 D5 Information included as guideline only
5-4 1 (FUTURE TENANT - NIC) LP1 D5 Information included as guideline only.
6-1 (FUTURE TENANT - NIC) LP1 D6 Quantity to be determined by number of
tenants in each building. Information
included as guideline only.
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WIEBER NELSON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01
1 1 I 1 1 I I 1 1 I 1 I 1 I I 1 1 1 1
SIGN TYPE
ITEM NUMBER Qn. TEXT
LOCATION DESIGN
PLAN SHEET SPECIAL NOTES
7-1 5818
DELIVERIES
LP 1 D7
7-2 1 5830
DELIVERIES
LP 1 D7
PROJECT: Carlsbad Corporate Center PROJECT NO: 2019 WIEBER NEISON DESIGN, INC. 619 239 2312 619 239 2313 fax 6/22/01