HomeMy WebLinkAboutPS 15-112; KELLEN TADANO; Sign Permits/Programs (PS)Ccicyof
Carlsbad
REVIEW FOR
SIGN PERMIT
P-11
Development Services
Planning Division
1635 Faraday Avenue
(760) 602-46
www.carlsbad
PLANNING APPLICATION 6___.__\ t;_-......,\'-'-1 '2. ___ _
REC'DBY ~ DATE -to~?z!E"'--'--,,-,~lS.----------
SIGN FEE di"£-
SIGN PROGRAM FEE _______ _
RECEIPT NO. __________ _
All plans submitted for sign permits/sign programs shall consist of a minimum of a site plan and
sign elevations containing the following Information:
1. North arrow and scale.
2. Location of existing buildings or structures, parking areas, and vehicular access points to the
property.
3. Location of all existing and proposed signs for the property.
4. Distance to the property line(s) for all proposed freestanding sign(s).
5. Provide an elevation for all proposed slgn(s) which specifies the following:
A. Dimensions and area for all existing and proposed slgn(s).
B. Materials the sign(s) will be constructed of.
C. Source of Illumination.
D. Proposed sign copy.
APPLICANT MUST SUBMIT THREE (3) SETS OF SIGN/SITE PLANS, A COMPLETED
APPLICATION FORM, AND THE APPLICATION FEE.
The appllcatlon must be submitted prior to 4:00 p.m. Average processing time: 2 weeks
Name of Project: /4/k<'J ~~<VQ ~~
Address of Project: /~q '> c~~Ls. bc,.c{ C), .l{~'&.Q,,_ '(Pr-G,.-c:-l-s.I..0-cR_ C'& q'LO t) ~
Assessor Parcel Number: /..,,-{;-/CfO -7 0-03-.,
Related Planning Case Number(S): __________________ _
TYPE OF DEVELOPMENT:
Residential (d) Hotel/Motel (g) Theater
ommerclal (e) Service Station (h) Gov't/Church/School
U) Produce Stand
(k) Nursery
Office/lndustrlal (f) Prof. Care (i) Public Park (I) , P-U/0S Zone
SIGN PROGRAM AND/OR SPECIFIC PLAN CRITERIA YesD No~
Spectflc Plan Number ____ _
VILLAGE REVIEW AREA (If yes, please complete information on page 3)
SOUTH CARLSBAD COASTAL REVIEW AREA
SIGN ORDINANCE: YesO No~
COASTALZONE: YesD NolE)
P-11 Page 1 of 4
YesB
Yes
No~
No~
Rev. 10/13
EXISTING SIGNS:
TYPE NUMBER SIGN AREA SIGN HEIGHT
Pole
Monument
Wall
Suspended/Projecting
Dlrectlonal
Canopy
Freestanding (Project Identity)
PERMITS ISSUED FOR EXISTING SIGNS: Yes O No O Date _____ _
PROPOSED PERMANENT SIGNS:
MAXIMUM NUMBER MAXJMUM PROPOSED MAXIMUM PROPOSED
TYPE NUMBER PROPOSED SIGN SIGN AREA SIGN SIGN
ALLOWED AREA HEIGHT HEIGHT
Pole**
Monument**
Wall I I )09:;€J-Cfc::oRJ-/J. II q"
Suspended/Projecting
Directional
Canopy
Freestanding**
(Project Identity)
Digital Display
PROPOSED TEMPORARY SIGNS:
MAXIMUM NUMBER MAXIMUM PROPOSED MAXIMUM PROPOSED
TYPE NUMBER PROPOSED SIGN SIGN AREA SIGN SIGN
ALLOWED AREA HEIGHT HEIGHT
Construction"""
For Sale"""
Banner
Interim
"'*Prior to approval, all proposed pole, monument, and freestanding signs must be reviewed
for potentlal sight distance and vlslblllty Issues. Addltlonal Information must supplement
this appllcation showing how the proposed signage wlll not encroach Into the public right-
of-way or present a traffic hazard. Page 3 of 4 illustrates an example for what would be
required for such proposed signs.
P-11 Page 2 of 4 Rev. 10/13
SITE PLAN REQUIREMENT FOR POLE, MONUMENT, AND FREESTANDING SIGN
APPLICATIONS
The followlng example illustrates the Information that is required for all pole, monument, and
freestanding sign permit applications. Prior to approval, all such proposed signs must be reviewed
for potential Issues by the Transportation Department, which wlll not allow signs to be approved
over the counter. Addltlonal time wlll be required for on-site inspection.
I I l I
PIL / Sight ;ce Requirement
Show bulldin&/1 I I
I
J I
~---l Shaw setbacks from all curbs ---
I I I ' I I I Show all property liner I
PIL : I
:/ I
curb line i ----------~---
I •
Si&]rtVuibllfty I
Street N 8llUl(1) (i) I
I NDI1h
21.41.080 Sign design standards
Relationship to Streets: Signs shall be designed and located so as not to interfere with the
unobstructed clear view of the publlc right-of-way and nearby traffic regulatory signs of any
pedestrian, bicyclist or motor vehicle driver.
Sight Distance: No sign or sign structure shall be placed or constructed so that it impairs the sight
distance requirements at any publlc or private street Intersection or driveway.
EXISTING SIGN PROGRAMS OR SPECIFIC PLAN SIGN CRITERIA
Total Building Square Footage: sq. ft. --------
To ta I Building Street Frontage: linear ft.
Total Signage Allowance: sq. ft.
Existing Signage (sq. ft.): sq. ft.
Remaining Sign Allowance at Present: sq. ft.
Proposed Signage (sq. ft.): sq. ft.
Remaining Sign Allowance After Proposed Sign: sq. ft.
VILLAGE REVIEW AREA
Total Signable Area: sq. ft. --------
Tot a I Signable Area Length: sq. ft.
Total Slgnable Area Height: sq. ft.
Total Projection from Wall Face: Inches
P-11 Page 3 of 4 Rev. 10/13
PROPERTY OWNER APPLICANT
NAME PRINT OR TYPE
MAILING ADDRESS
.p _o , ;:,.. '.) /
TELEPHONE CITY STATE ZIP TELEPHONE
I CERTIFY THAT I AM THE LEGAL OWNER
AND THAT ALL THE ABOVE INFORMATION
IS TRUE AND CORRECT TO THE BEST OF
MY KNO~Eu*~&
1 {V/~b /f c:;-
SIGNATURE DATE
PLANNER CHECK LIST:
1. Field check by planner.
2. Within maximum length, area.
I CERTIFY THAT I AM THE REPRESENTATIVE
OF THE LEGAL OWNER AND THAT ALL THE
ABOVE INFORMATION IS TRUE AND CORRECT
TO THE BEST OF MY KNOWLEDGE.
}D(fl-6 I,~
DATE
3. Style consistent with Sign Program and/or Specific Plan criteria, if applicable.
4.
5.
6.
Location: •:• In right-of-way •:• In visibility triangle at corner
Pole and monument signs to be checked by Transportation Engineering, for visibility issues.
When approved route copy to Data Entry
APPROVED: Planner: ____ f}-=----=--'f-_______ _ Date: __ ! o_( t_~ ........ I_I)~
P-1 1 Page 4 of 4 Rev. 10/13
... ~
OFFICE 'A' SOUTHWEST ELEV,_TION
X,llt.Ctf'-1' ....
OFACE 'B' SOUTHWEST ElEIIAllON SCML. ,,..._,._..
OFACE '0' NOATMEAST ELEVATION ,c,,u:,,.-.1·-tr
CHILDS MASCARI WARNER
a,,Ehltect•
111,.....-M.s.-,. ---"'" '1\IM.lllit..-1.11\at
SOP-05-13, CT-05-19 PUO-05-15;
S:GN JPER.ll.n.t NO. PS \5-\ l1.,
A?PROVED UY
PLANNil'-iG
BUIL!)ING
Ol'FICE 'C' NOATiiWEST ElEVATION ,0,U.t1t·-,·...-
..........
Ol'FICE 'E' ~RTHEAST ELEVATION 10lf.l' ,,. •• ,._..
Or?'
DATE
~
2
SIGNAGE ELEVATIONS
CARLSBAD MEDICAL VILLAGE
CAIU.SIA.O VILLACE ~
CAWAAO.C...-
nnmnn ... i.i.:.:.:. •••• ~~ •• •II It I I It I
[1~
•• I• I I I I I I I I
,. ,uuut "'"'"'"'
~ -..............
7'i7'l";' 7'i7'i', .. um mr .
~
u .........
r~ nm mi
a ,l h 3 u l~ ~
".
w \!: ... u z· <.:> vi
w a. ,.. ii-' vi
z ~ ~ :1 "l! ~--
*I
i "' :,
;;! z : 12 "' I-
' z w :,; :, :,;
0 ~
~ w 0. I:= .. , z 12 "'
Acrylic Letters Specifications
Part I -General
1.1 Scope
A Furnish letters and hardware necessary to install acrylic letters shown on drawings and herein specified.
1.2 Submittals
A Manufacturer's illustrated product literature and specifications.
B. Installation instructions
1.2 Quality Assurance
A. Manufacturer to have a minimum of20 years experience In manufacturing letters.
B. All letters to be manufactured by one manufacturer.
Part II -Products
2.1 Acceptable Manufacturer or Manufacturer's Representative
A. Gemini Incorporated
103 Mensing Way
Cannon Falls, MN 55009
Phone: 800-538-8377 or 507-263-3957
Fax: 800-421-1256 or 507-263-4887
Email: sales@signletters.com
Web: www.signletters.com
2.2 Materials (Impact-modified extruded acrylic)
A. Gemini manufactures its own High Density Polyethylene (HDPE), which offers good rigidity & tensile strength. It is
resistant to chemicals & corrosion and has UV inhibitors to help prevent colors from fading.
2.3 Gemini's own Extruded sheets ofacryllc range from 1/8", 3/16", 3/8", 1/4" and 1/2" thick. Cast sheet is also
cut then painted in ¼" and 1" thicknesses.
A Laser cutting has an inside diameter of .030". The laser beam used to cut our acrylic letters and logos is actually
.010", but a slight radius is given to the inside comers of letters to prevent cracking.
B. Router cutting produces a larger radius with a 125" diameter bi.
C. Computerized vector files need to be imported and then cleaned to properly cut a good letter. The degree of
cleaning is more critical with a laser as the inside diameter will be·.030".
D. The largest single piece we can cut is 47-1/2" x 95-1/2". Larger shapes can be cut in pieces. Smaller letters under
24" can be cut out of 1/8" & 3/16" thick material. Larger letters require a thicker gauge.
E. Acrylic letters and logos are cut in gauges up to 1" thick in over 32 different colors
F. 1000-watt lasers polish the edge return of all letters and logos as they cut through the material, providing a superior
finish.
G. Impact Strength of 1.2, with a HN Flammability Rating. Vicat Softening Temperature of227°F.
2.4 Mounting Hardware
A. Acrylic letters are available or with studs, pads, or a combination of the two for mounting options.
B. Standard acrylic letters are mounted with 3/16", I 0-24 aluminum studs. Thin stroked letters with a 6/32 stud.
2.5 Manufacture
A Letters shall be made of acrylic.
B. Letter shall be ______ letterstyle and shall be ___ inches high, as Indicated on the drawings.
C. Mounting shall be and a mounting template designating stud locations is/is not required for
mounting on a _____ surface
Part III -Execution
3.1 Installation
A. A qualified installer shall install acrylic plastic letters.
3.2 Warranty
A Letters should be guaranteed for the life of the business against defects.
-------"' ~-.,.,.i;,i;-:.-,_._ ~
/J~S~
-----as managing agent on behalf of the
Carlsbad Medical Village Maintenance Association