HomeMy WebLinkAboutPS 89-59; Best Beauty Supply; Sign Permits/Programs (PS)~1xy or LarlsDaa 2075 Las Palmas Drive Carl sbad, CA 92009 (619) 438-1161 SIGN PERMITS
APPLICANT MUST SUBMIT THREE (3) SETS OF SIGN/SITE PLANS. Average processing Time: 2 weeks
NAME OF PROJECT: 5d
ADDRESS OF PROJECT: 7/36 GAC/ HQ45 *e
~~ ~~~~~
PLANNING CASE NUMBER: DATE OF SUBMITTAL: 7- /7- 97
SIGN TYPE: Commercial (b) Industri a1
(e) Real Estate (e) Freeway (9) Community identity (h) Service Stn. Pr
(c) Residential (f) Marquee ices (I) Campaign
SIGN PROGRAM AND/OR SPECIFIC PLAN CRITERIA: Yes NO SPECIFIC PLAN NUMBER
VILLAGE REDEVELOPMENT AREA Yes No - **REQUIRES VR APPROVAL
. SIGN ORDINANCE: Yes No -
COASTAL ZONE: Yes No /COASTAL PERMIT Yes No -
EXISTING SIGNS: IYf.22 .._ Number Size -
(a) Pole b rl0 "" ~ (b) Monument
(c) Wall 00
lc3a
PERMITS ISSUED FOR EXISTING SIGNS:QJR Yes No - Date
BUILDING FRONTAGE: (Building street frontage) 20 ' ft . EXISTING SIGNS (SQ. FT.): &ne sq. ft. REMAINING SIGN ALLOWANCE (AT PRESENT): c sq. ft. PROPOSED SIGN: sq. ft. REMAINING SIGN ALLOWANCE (AFTER THIS SIGN): / sq. ft.
-zr
PLANNER CHECK LIST:
1. Field check by planner.
2. Within maximum length, area.
3. Style consistent with Specific Plan criteria, if applicable.
4. Location: In right-of-way In visi bil ity triangle at corner On roof
5. Pol e and monument si to be checked by Bob Johnson, Traffic Engineer, for visibility issues.
APPROVED: P1 anner : Date: V I
LBS : af
Rev. 4/89
SIGNS - SITE PLAN I !
Material: .For Building IF1 oval cabinet (can) internally illuminated. Face to be colored
plastic with contrasting colored letters.
Sides to be bronze colored.
Refer to sign type - B3 and 84
Tenant logo and letter types for gas station at Pad 5
located along "Avenida Encinas."
.Size: 2'-611 x l.O'-O1l (max. overall)
Material: Metal cabinet internally illuminated. Face
to be colored plastic. Sides to be bronze
colored.
Refer to sign type - 65
I Each building, tenant, or user may have a .6 square foot
, No wall sings are allowed to face 1-5 freeway or freeway of wall sings for every lineal foot of building frontage.
on ramp. Corporate symbol, trademark, or logo may be
used as part of the copy.
t- - Size : Maximum letter or logo height for shops is
24" and a minimum height of 12". Maximum
letter height for building 'C', '1' and office
building shall be 36". Maximum logo size
for building IF' is 16' x 5' with 4'-6" high
letter.
Material: For :s@iipshnd buildings C, I and office, ,si.. . ..
individual channel letters internally
illuminated. Face to be colored plastic.
Sides to be bronze colored.
!
Material: For Building IF', oval cabinet (can) internally
illuminated. Face to be colored plastic with
contrasting colored letters. Sides to be
bronze colored.
Refer to Sign type - C1, C2, C3, C4, and CS.
(5) FRONT DOOR SUITE IDENTIFICATION
t.
(6) BACK DOOR SUITE IDENTIFICATION
..
Each tenant is allowed one wall. mounted blade sign
under the arcade next to the entry door. Sign is to
double faced. Chain mounted on standard wall bracket.
Size: Sign face can have a total area not to exceed 3 square feet with maximum height of 2 ft. or
a maximum width of 2.5 feet.
Material: Redwood - sandblasted, carved, andlor painted.
Refer to sign type - Dl.
Each tenant shall have a front door suite identification to
be applied to the glass, door. Identification to contain
both building address and suite number within the project
logo.
Size: Logo Diameter - 5 3/12"
Material: Applied vinyl with a cut out to expose glass
Number - 14"
at numbers. Numbers to be applied vinyl. .
Refer to sign type E.
Each tenant shall have a back door identification to
contain the building number and the suite number within
the project logo. Underneath the project logo would be
the tenants name.
I_ Size: Logo diameter - 5 314"
numbers - 1 4
letters - 3"
Material: Applied vinyl, colors to match, typical
project logo. Names and numbers to be
applied vinyl.
Refer to sign type F
"
WALL, SIGNS . .I IC1
w$ "" i I