HomeMy WebLinkAbout1735 Yada Pl; ; CBRA2018-0051; RecyclePollutant Control
4.504.1 Duct openings and other related air distribution component openings shall be covered
during construction.
(X)
4.504.2.1 Adhesive, sealants and caulks shall be compliant with voe and other toxic compound (X)
limits. (X)
4.504.2.2 Paints, stains and other coatings shall be compliant with voe limits. (X)
4.504.2.3 Aerosol paints and coatings shall be compliant with product weighted MIR limits for
ROG and other toxic compounds. (X)
4.504.2.4 Documentation shall be provided to verify that compliant VOC limit finish materials
have been used. (X)
4.504.3 Carpet and carpet systems shall be compliant with VOC limits.
4.504.4 50 percent of floor area receiving resilient flooring shall comply with VOC-emission limits (X)
defined in the Collaborative for High Performance Schools (CHPS) Low-emitting Materials List or
be certified under the Resilient Floor Covering Institute (RFCI) FloorScore program. (X)
4.504.5 Particleboard, medium density fiberboard (MDF) and hardwood plywood used in interior
finish svstems shall comply with low formaldehvde emission standards.
Interior Moisture Control
4.505.2 Vapor retarder and capillary break is installed at slab on grade foundations. (X)
4.505.3 Moisture content of building materials used in wall and floor framing is checked before (X )
enclosure.
Indoor Air Quality and Exhaust
4.506.1 Exhaust fans which terminate outside the buildinq are provided in everv bathroom. (X)
Environmental Comfort
4.507.1 Whole house exhaust fans shall have insulated louvers or covers which close when the (X)
fan is off. Covers or louvers shall have a minimum insulation value of R-4.2.
4.507.2 Duct systems are sized, designed, and equipment is selected using the following
methods: (X)
1. Establish heat loss and heat gain values according to ACCA Manual J or equivalent.
2. Size duct systems according to ACCA 29-D (Manual D) or equivalent
3. Select heatina and coolina equioment accordina to ACCA 36-S (Manual S) or equivalent.
Installer and Special Inspector Qualifications
702.1 HVAC system installers are trained and certified in the proper installation of HVAC
systems.
(X)
702.2 Special inspectors employed by the owner must be qualified and able to demonstrate (X)
competence in the discipline they are insoectinq.
I, as the professional responsible for this project, certify that, to the best of my knowledge, the mandatory items
listed on this form have been incorporated into the project in order to comply with Title 24, Part 11 of the 2016
California Green Building Standards. All receipts for recycled materials have been attached to this form.
Project Address: 1735 Yada Pl (Lot 2 Main House) Plan Check Number: PC2017-0048
Print Name: J Hall Signed: ~r/a&
License Number: 927267 Date: 11/01/2019
B-51
Page2 of2
Rev. 5/17