Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2525 EL CAMINO REAL; 205; FPC2018-0133; Permit
PERMIT REPORT Fire Permit Print Date: 10/07/2021 Job Address: 2525 El CAMINO REAL, # 205, CARLSBAD, CA 92008-1204 Permit Type: Parcel#: FIRE-Construction Commercial Work Class: Fire Alarm Track#: Valuation: Occupancy Group: #of Dwelling Units: Bedrooms: Bathrooms: Project Title: $0.00 Description: VANS -FIRE ALARM Tl Applicant: JOHNSON CONTROLS FIRE PROTECTION LP DOUGLAS DANIELS 3568 RUFFIN RD SAN DIEGO, CA 92123-2597 (858) 633-9123 FEE FIRE Tl Fire Alarm System Total Fees: $601.00 Fire Department Lot#: Project#: Plan#: Construction Type: Orig. Plan Check #: Plan Check#: Total Payments To Date: $601.00 Ccityof Carlsbad Permit No: FPC2018-0133 Status: Closed -Finaled Applied: 05/04/2018 Issued: 05/18/2018 Fina led Close Out: 08/19/2021 Inspector: Final Inspection: FPContractor: SIMPLEX GRINNELL LP 3568 RUFFIN RDS SAN DIEGO, CA 92123-2597 (858) 633-9100 Balance Due: AMOUNT $601.00 $0.00 Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 I 760-602-4665 I 760-602-8561 f I www.carlsbadca.gov tqca SimplexGrinne/1 SimplexGrinne/1 LP 3568 Ruffin Road San Diego, California 92123 P: 858-633-9100 F: 858-633-9101 www.simplexgrinnell.com Fire Detection and Alarm System Product Submittal Project: Vans The Shoppes at Carlsbad 2525 El Camino Real Suite 205 Carlsbad, CA For any questions regarding this submittal, please contact Douglas Daniels, 858- 633-9123 or douglas.daniels@jci.com 5/2/2018 REV.#: 0 PROJECT Safer. Smarter. Tyco. rM tl.j!i~'!exGrinne/1 Fire Detection and Alarm System Products Qty Model No. Description 4098-9755 Duct Detector 2098-9806 Remote Test Station/LED 2 4090-9010 RelaylAM 3 4906-9204 Strobe 3 49SV-APPLC Speaker Strobe Business Information Warranty Information 5/2/2018 REV.#: 0 Safer. Smarter. Tyco.™ SimplexGrinne/1 LP 3568 Ruffin Road San Diego, California 92123 P: 858-633-9100 F: 858-633-9101 www.simplexgrinnell.com C.S.F.M. No. 3420-0026:0241 7300-0026:0150 7300-0026:0311 7125-0026:0235 7125-0026:0384 PROJECT UL, ULC, CSFM Listed; FM Approved; MEA (NYC) Acceptance* TrueA/arm Analog Sensing Addressable Duct Sensor Housings with TrueAlarm Photoelectric Sensor; Available with Multiple Relay Control Compact air duct sensor housing with clear cover to monitor for the presence of smoke'* Includes factory installed TrueAlarm photoelectric smoke sensor and features: • Individual sensor information processed by the host control panel to determine sensor status • Digital transmission of analog sensor values via IDNet or MAPNET II, 2-wire communications • Programmable sensitivity, consistent accuracy, environmental compensation, status testing, and monitoring of sensor dirt accumulation Model 4098-9755: • Basic duct sensor housing (no relay output) powered by IDNet/MAPNET II communications Model 4098-9756: • Duct sensor housing with supervised output for multiple remote relays; requires separate 24 VDC; includes one relay • Relay output is under panel control • At the panel, relay output can be activated manually or in response to a separate alarm or other input General features: • UL listed to Standard 268A • Clear cover allows visual inspection • Test ports provide functional smoke testing access with cover in place • Mounts to rectangular ducts or round ducts; minimum size is 8" (203 mm) square or 18" (457 mm) diameter • Magnetic test feature for alann initiation at housing • Optional weatherproof enclosure is available separately (refer to data sheet S4098-0032) Diagnostic LEDs (on interface board): • Red Alarm/Trouble LED for sensor status and communications polling display • Yellow LED for open or shorted trouble indication of supervised relay control (4098-9756 only) Sampling tubes (ordered separately): • Available in multiple lengths to match duct size • Installed and serviced with housing in place Remote module options (ordered separately): • Remote red status/alarm LED (2098-9808) • Remote test station with LED (2098-9806) • 4098-9843 remote relays (refer to page 2 for details) * These products have been approved by the California Slate Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 3240-0026.241 for allowable values and/or conditions concerning material presented in this document. It is subject to ~xamination, re'llsion, and possible cancellation. Accepted for use -City of New York Department of Buildings-MEA35-93E. Additional listings may be applicable: contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. Duct Sensor Housing, Front and Bottom View • • 0 -i;-·-=@ ·-• • 2098-9808 2098-9806 Remote Status/Alarm Indicator and Test Station lliUUU@Oi·UI Operation. Simplex® compact air duct smoke sensor housings provide TrueAlarrn operation for the detection of smoke in air conditioning or ventilating ducts. Sampling tubes are installed into the duct allowing air to be directed to the smoke sensor mounted in the housing. ii 111¥161 i,,H4,M•ii•J •i4F I I l•i,i Digital Communication of Analog Sensing. Analog information from the sensor is digitally communicated to the control panel where it is analyzed. Sensor input is stored and tracked as an average value with an alarm or abnormal condition being determined by comparing the sensor's present value against its average. Intelligent Data Evaluation. Monitoring each photoelectric sensor's average value provides a software filtering process that compensates for environmental factors (dust, dirt, etc.) and component aging, providing an accurate reference for evaluating new activity. The result is a significant reduction in the probability of false or nuisance alarms caused by shifts in sensitivity, either up or down. "* Please note that smoke detection in air ducts is intended to provide notification of the presence of smoke in the duct. It is not intended to, and will not, replace smoke detection requirements for open areas or other non-duct applications. S4098-0030-9 11/2012 iii1t¥1611,,H4,M·il•J•MFIIM,iii·fi@liiMid Control Panel Selection. Peak activity per sensor is stored to assist in evaluating specific locations. The alarm set point for each sensor is determined at the control panel, selectable as the individual application requires. Sensor Status LED. Each sensor housing's red status LED (located on the electrical interface board) pulses to indicate communications with the panel. If the control panel determines that a sensor is in alarm, or that it is dirty or has some other type of trouble, the details are annunciated at the control panel and that sensor housing's status LED will be turned on steadily. During a system alarm, the control panel will control the LEDs such that an LED indicating a trouble will return to pulsing to help identify any alarmed sensors. (Remote Status/ Alarm LEDs track the operation of the sensor housing LED.) IN®PAtt4111¥i4,Ml,t·I TrueAlann photoelectric sensors use a stable, pulsed infrared LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. ■•UAEi4,M·l ►ieiffi'4il·i,i➔Mfll IM@PAGGlll¥i4,Ml,l·F■MMM Typically duct sensor applications require less sensitive settings (such as 2.5% per foot obscuration) due to the ducts being a relative dirty environment. However, the standard seven levels of TrueAlarm sensor sensitivity are available for each individual sensor, ranging from 0.2% to 3.7% per foot of smoke obscuration. Sensitivity is selected and monitored at the fire alarm control panel. 14iii·36111,13-i,lfflii¥1,Mli¥il11i4◄ • Individual smoke sensitivity selection • Sensitivity monitoring that satisfies NFPA 72 sensitivity testing requirements • Peak value logging allows accurate analysis for sensitivity selection • Automatic, once per minute individual sensor calibration check verifies sensor integrity • Automatic environmental compensation • Smoke sensitivity is displayed in percent per foot • Ability to display and print detailed sensor information in plain English language • Relays of model 4098-9756 are under panel control for ON, OFF, or override Duct Smoke Sensor Housing with Photoelectric Sensor" Model Description Basic Duct Sensor Housing, operating power is supplied by 4098-9755 either IDNet or MAPNET II communications (no relay output) 4098-9756 Duct Sensor Housing with supervised multiple relay output, requires separate 24 voe fire alann power and 4081-9008 end-of-line resistor harness: includes one 4098-9843 relay Compatlblllty Simplex fire alann control panel models: 41 00ES, 4010ES, 4008, 4010, 4100U, and legacy products 4020, 4100/4100+, and 4120. Also 2120 CDT if configured for MAPNET II, TrueAlarm operation Same as above except relay operation is not compatible with 2120 CDT; Relay output is for up to 15 total 4098-9843 Relays (additional relays are ordered separately) Remote LED Indicator and Test Station, Select One if Required Model Description 2098-9808 Red LED status indicator on single-gang stainless steel plate Test Station with keyswitch and red LED status indicator, on 2098-9806 single-gang stainless steel plate; (turning switch to uTEST" initiates alarm for system testing) Epoxy Encapsulated Remote Relay and End-of-Line Resistor Model , Description Compaflbltlty 4098-9755 4098-9756 Mounting Use single gang box, 3"Hx2"Wx2"D (76mmx51 mmx51 mm) Location Relay; single Form C (7 A@ 120 VAC); refer to pages 3 and 4 Compatibility 4098-9756 only; connect up to 15 Locate relays within 3 ft (1 m) of device being controlled per NFPA 72 4098-9843 for additional relay information; one included with 4098-9756; wiring is 18 AWG (0.82 mm2 ) color coded wire leads 4081-9008 End-of-Line Resistor Harness; 10 kn, 1/2 W; (ref. 733-894); required to supervise remote relay coil connection 4098-9756 At last relay location • Each duct housing includes an internally mounted model 4098-9714 TrueAlarm photoelectric sensor and an exhaust tube. A correctly sized sampling tube (ordered per application) is required, refer to chart below. ,thll·hill·ifflMieitnh•IIGttMM•MMi4·i½4•6iEiAbffl•ttAMO ►tlt#41•Hi4 Overall Duct Width ' Tube Required Sugges'ted Cut Length 12" (305 mm) 4098-9854 1/2" (12,7 mm) longer than duct width 13" to 23" (330 mm to 584 mm) 4098-9855 1/2" (12,7 mm) longer than duct width 24" to 46" (610 mm to 1168 mm) 4098-9856 3 in" (76 mm) longer than duct width 46" to 71" (1168 mm to 1803 mm) 4098-9857 3 in" (76 mm) longer than duct width 71" to 95" (1803 mm to 2413 mm) 4098-9858 3 in" (76 mm) longer than duct width 2 S4098-0030-9 11/2012 l•ttA►i4,&i·llilHIMl,1·1 .. ffitffli@l414,131 NOTE: Refer to Installation Instructions 574-776 for additional installation detail and maintenance information. 6-3/4" (171 mm) i 3-3/8" (86 mm) 13/16" (21 mm) Square duct reference outline 18" Round duct outline (minimum diameter) -, • End View with Ducts and Tubes Exhaust tube DO NOT MOUNT ON BOTTOM OF DUCT / ""' 3 te with dual holes 19 mm) conduit, plug for unused hole Front v,ew [Side of duct~ NOTE: Orientation shown is for reference only, refer to General Location Notes and End View illustration below for alternate mounting reference. Bottom view 4098-9843 Remote Relay (7 A@ 120 VAC, for use with 4098-9756 only) NOTE: Mount in separate electrical box within 3 ft (1 m) of device being controlled per NFPA 72 Sampling tube, keyed for proper hole alignment with holes facing into airflow (template is provided for proper tube installation). (Housing is shown as position 2 per note 2 below.) General Location Notes: 1. Testing performed under the auspices of the Fire Detection Institute (FOi) recommended when sampling tubes are not located vertically, that they be positioned horizontally in the upper half of the duct to account for possible stratification. 2. Three duct side mounting options are available as shown below. Mount housing at 90° to airflow for all orientations. t I Arrows indicate allowed airflow directions. t c-uflc-lD ;fJ S4098-0030-9 11/2012 l•HAEi4,h·il3·14iii-i,iiGMi4,i4§ Duct Sensor Location Considerations: ," Exhaust Damper Sensor OK 1. Proper duct smoke detection location must ensure adequate airflow within the duct housing. Fresh air-+ I Return air damper Do not locate sensor here Do not locate sensor here -Return Air -+ Supply Air Sensor OK 2. Duct air velocity rating is 300 to 4000 ft/min (91 to 1220 rn/min). Pressure differential between intake and exhaust tubes is required to be between 0.015 to 1.55 inches of water (0.381 to 39.37 mm). 3. Ensure accessibility for test and service. 4. Proper Locations: downstream side of filters to detect fires in the filters; in return ducts, ahead of mixing areas; upstream of air humidifier and cooling coil. 5. Other locations and orientations may be required for proper duct smoke detection depending on duct access, system design, and duct airflow testing. Contact your local Simplex product supplier for assistance. Locations to Avoid: Additional Information. Refer to NFPA 90A, Standard for the Installation of Air Conditioning and Ventilating Systems; NFPA 72, the National Fire Alarm and Signaling Code; and the NEMA Guide for Proper Use of Smoke Detectors in Duct Applications, and Installation Instructions 574-776. 1. Where dampers closed for comfort control would interfere with airflow. 2. Next to outside air inlets (unless the intent is to monitor smoke entry from that area). 3. In return air damper branch ducts and mixing areas where airflow may be restricted. General Mechanical and Environmental Air Velocity Range (linearfUmin) 300 to 4000 ft/min (91 to 1220 m/min) Sensor Sensitivity Range 0.2% to 3.7% per foot of obscuration, selectable at host control panel UL Listed Temperature Range 32° F to 100° F (0° C to 38° C) Operating Temperature Range 32° F to 122° F (0° C to 50° C) Storage Temperature Range 0° F to 140° F (-18° C to 60' C) Humidity Range 10% to 95% RH, non-condensing Wiring Connections Terminal blocks, 18 to 12 AWG (0.82 mm' to 3.31 mm') Housing Color Black base with clear cover Remote Status/Alarm LED and Test Station with Remote Status/Alarm LED Remote Alarm LED Current 1.2 mA, no impact to 24 VDC alarm current (2098-9808 or 2098-9806) Test Station Keyswitch Current 3.3 mA, no impact to 24 VDC alarm current (2098-9806) Remote Alarm LED and Test Station Distance 250 ft (76 m) maximum Addressable Operation Data Communications IDNet or MAPNET II communications, auto-select, one address per housing; provides operating power to model 4098-9755 Model 4098-9756 with Supervised Multiple Relay Control, Requires Separate Fused 24 voe from Fire Alarm Power Supply Input Voltage 18-32 VDC (24 VDC nominal) Standby Current 3 mA@ 24 voe Alarm Current 15 mA@ 24 VDC; add 15 mA for each 4098-9843 relay Supervised Remote Relay Control Output For use with 4098-9843 relay only, quantity of 15 maximum; distance of 500 ft (152 m) maximum; requires 4081-9008 (ref. 733-894) 10 kfl, 1/2 Wend-of-line resistor 4098-9843 Relay Output Ratings, Single Form C, use with Model 4098-9756 Only Coil Current Relay Contacts Location Distance 15 mA@ 24 VDC, up to 15 maximum per relay control output 7 A at o.35 PF@ 2a voe & 120 VAC; 250 µA@ s voe 500 ft (152 m) maximum to relay coils; locate relays within 3 ft (1 m) of device being controlled per NFPA 72 TYCO, SIMPLEX, and the product names listed in this material are marks and1or registered marks. Unauthorized use is stnctly prohibited. NFPA 72 and National Fire Alarm and Signaling Code are registered trademarks of the National Fire Protection A.fsocwtion (Nf//'A). &.Simplex Tyco Fire Protection Products• Westminster, MA• 01441-0001 • USA \.-1/WW.simplexgrinnell.com S4098-0030-9 11/2012 C 2012 Tyco Fire Protection Products. All n'g}its reserved All specifications and other irifonnation shown were current as of document revi.fwn date and are subject to change without notice. LISTING No. CATEGORY: LISTEE: DESIGN: RATING: INSTALLATION: MARKING: APPROVAL: NOTE: CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 3240-0026:0241 3240 --DUCT SMOKE DETECTOR HOUSING/BASE Simplex100 Simplex Drive, Westminster, MA 01441-0001 Contact: Jim Goyette (978) 731-8580 Fax (978) 731-8881 Email: jgoyette@tycoint.com Page 1 of 1 Models 4098-9755, "4098-9755TSP, "4098-9755TTP, 4098-9756, "4098-9756TSP, "4098-9756TTP, 4098-9685, 4098-9686, 4098-9687 and 4098-9688 photoelectric type air duct smoke detector units and Model 4098-9841 relay (for Model 4098-9688 only). Unit consists of a listed detector head, base, a sampling and an exhaust tube and an enclosure. Refer to listee's data sheet for additional detailed product description and operational considerations. Air Velocity: 300 -4000 feet/min In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. Listee's name, model number, electrical & air velocity rating, and UL label. Listed as duct smoke detector units for installation in HVAC systems when used with separately listed compatible fire alarm control units. Refer to listee's Installation Instruction Manual for details. *Rev. 11-06-03 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2017 DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2018 LISTING No. CATEGORY: LISTEE: DESIGN: RATING: INSTALLATION: MARKING: APPROVAL: NOTE: CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING· BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 7300-0026:0150 7300 --FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES Simplex100 Simplex Drive, Westminster, MA 01441-0001 Contact: Jim Goyette (978) 731-8580 Fax (978) 731-8881 Email: jgoyette@tycoint.com Page 1 of 1 Models 2098-9805, -9806, -9808. -9744 and 4098-9830 remote alarm indicator; Model 4098-9835 remote power/alarm indicator with test switch; Model 2098-9816 remote power/alarm/trouble indicator; Model 4098-9834 remote alarm indicator with test switch. Refer to listee's data sheet for detailed product description and operational considerations. In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. Listee's name, model number, electrical rating and UL label. Listed as remote indicators for use with separately listed compatible detectors and control units. Models 2098-9805, -9806, -9808, -9744, and 4098-9834, -9835 are intended for use with duct smoke detectors. Model 2098-9816 is intended for use with projected beam detector systems. This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results andfor other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2017 DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2018 UL, ULC, CSFM Listed; FM Approved* ii¥0Hi4i Individual Addressable Relay Module (Relay 1AM): • A single addressable point provides control and status tracking of separate, 8 A Nonnally Open (Fonn A, NO) and 8 A Nonnally Closed (Fonn B, NC) contacts • Low power latching relay design allows IDNet communications to supply both data and module power • Operation upon loss and restoration of communications is switch selectable to either reset the output relays to nonnal or to.keep them latched in the selected state For use with following Simplex® control panels: • Model Series 4007ES, 4008, 40 I 0, 40 IOES, 41 00ES, and 4100U fire alann control panels for IDNet communications Compact construction: • Mounts in standard 4" (102 mm) square electrical box, optional adapter bracket is available to mount in a 4 11/16" square electrical box • Screw terminals for wiring connections • Visible LED flashes to indicate communications, can be selected at panel to indicate activated state • Optional 4" square box covers are available to allow LED to be viewed after installation UL listed to Standard 864 ll•J4191UUlthl 8 A Relay IAMs allow fire alann control panels to control a remotely located NO and NC contact using IDNet addressable communications for both data and module power. Typical applications would be for switching local power for control functions such as elevator capture, or control ofHV AC components, pressurization fans, dampers, etc. Relay status is also commun.icated requiring on.ly one device address. iWUIIPAJ.ti@Oi·UI Model I Description 4090-9010 8 A Relay 1AM Optional Trim Plates and Adapter Model Description 4090-9801 For semi-flush Trim plate, galvanized ------+_m_o_u_n_te_d_b_o_x_---<steel, with LED viewing 4090-9802 4090-9813 For surface window; includes mounted box mounting screws Adapter plate to fit 4 111,s" (119 mm) square electrical box * This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:0311 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. Multi-Application Peripherals IDNet Communicating Devices Model 4090-9010, 8 A Relay 1AM 4090-9010 8 A IDNet Relay 1AM Package (shown approximately 1/2 size) W•i431h¥0i•Jl~i Communications Relay 1AM Power Installation Instructions IDNet communications, 1 address per device Supplied by IDNet communications 579-1063 Contact Ratings* (not rated for incandescent switching) Type Separate contacts; 1, NO and 1, NC Maximum Voltage 250 VAC or 30 voe Ratings Current Ratings 8 A, resistive 3.5 A, inductive at 0.35 PF * Provide circuit fusing and transient suppression as required per application. DC inductive loads can typically be diode suppressed; 1201240 VAC loads may require RC networks or varistors, depending on device type. Refer to Installation Instructions for additional information. Wire Connections Screw terminals for in/out wiring, 18 to 14 AWG wire (0.82 to 2.08 mm') Up to 2500 ft (762 m) from control panel IONet Up to 10,000 ft (3048 m) total wiring Communications Wiring Reference distance (including T-Taps) Compatible with Simplex 2081-9044 Overvoltage Protectors Dimensions 4 ¼" H x 4" W x 1 ¾" D (105 mm x 102 mm x 35 mm) Mounting Plate Sheet metal, galvanized Temperature 32' to 120' F (0' to 49' C), Range intended for indoor operation Humidity Range Up to 93% RH at 100' F (38' C) S4090-0015-1 1112014 l:t1;N6NM®l®t•ili,iii,Ulttii-iil,6111·i,i -9/16" 4 (1 16mm) 4090-9010 8A Relay 1AM 0 4" (102 mm) square box, 2-1/8" (54 mm) minimum depth, RACO 232 or equal (supplied by others) I ~---Double gang blank cover plate and mounting screws, for use when LED is not required to be externally viewed (supplied by others) Mounting Reference, Double Gang Blank Cover Plate @ @ WARfoa'«J: NDmlMIIJlllfll• AVERTISSBENT: mlfllUal .... t Add su pplied label to site if controlling or240VAC cover on- 120 @ AVER11SSEMENT: -~a.--.. N @ l 4-5/16" ~Light! @ @ 111 I pe for LJ'-v-iew-in_g_/ ____ @ __ _,.Jm) ·-9/16" (116 mm) 4090-9801, Trim plate for semi-flush mounted box -1 i.---5/16" (109 mm)----1 4090-9802, Trim plate for surface mounted box Optional Trim Plates for Visible LED TYCO, SIMPLEX. and the product names listed in this material are marks and1ar registered marks. Unauthorized use is strictly prohibi1ed. &.Simplex Tyco Fire Protection Products• Westminster, MA• 01441-0001 • USA www.simpfex-fire.com S4090-0015-1 11/2014 © 2014 Tyco Fire Protechon Products. All rights reserved. All specificahons and other infonnallon shown were cu"enl as of document revision date and are subject to change without nohce. LISTING No. CATEGORY: LISTEE: DESIGN: RATING: INSTALLATION: MARKING: APPROVAL: CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 7300-0026:0311 7300 --FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES Simplex100 Simplex Drive, Westminster, MA 01441-0001 Contact: Jim Goyette (978) 731-8580 Fax (978) 731-8881 Email: jgoyette@tycoint.com Page 1 of 1 Models 4090-9118 relay 1AM (individually addressable module) module, 4090-9119 relay 1AM module with unsupervised feedback, 4090-9008 dual relay 1AM, •4090-9010 eight amp relay 1AM and 4090-9120 six-point 1/0 module. (1AM). Refer to listee's data sheet for detailed product description and operational considerations. 30VDC In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. Listee's name, model number, electrical rating and UL label. Listed as control unit accessories for use with listee's separately listed compatible fire alarm control units. *Rev. 04-24-13 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2017 DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2018 TrueA/ert Addressable Notification Appliances UL, ULC, CSFM Listed; FM Approved; MEA (NYC) Acceptance* ii¥1Uii4i Individually addressed and controlled multi-candela V/O (visible only) notification appliances provide: • Multi-candela xenon strobe with synchronized I Hz flash rate and with intensity programmable from the control panel or jumper selected as 15, 30, 75, or 110 cd • Advanced addressable notification controlled by IDNAC SLCs providing regulated 29 VDC allowing strobes to operate with lower current even under battery backup • Wiring supervision to each strobe allowing "T-tapped" connections for Class B circuits to simplify wiring (Class A circuits require in/out wiring) • TrueAlert Device Reports at the control panel detailing appliance point ID, custom label, type, and candela setting (see sample on page 2) • Magnet test diagnostics to assist checkout and testing of appliances and wiring • Compatibility with ADA requirements • Compatibility with legacy TrueA!ert addressable systems for upgrade and replacement (see page 3) • UL listed to Standard 1971 and ULC-S526* LED indicator and magnet test feature: • Appliance LED can be selected to display each polling cycle to indicate appliance supervision • In diagnostic mode, the magnet test pulses the LED to indicate appliance address AND pulses to indicate the intensity selection; a brief output of the strobe is also selectable to confirm operation Mechanical design features: • Rugged, high impact, flame retardant ceiling mount thermoplastic housings are available in red or white • Rear of housing does not extend into box and easily mounts to standard electrical boxes • Mounting options include red wire guards and adapters for surface mounted electrical boxes See page 2 for wire guard listings. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7125-0026:235 for allowable values and/or conditions concerning material presented in ttiis document. Accepted for use -City of New York Department of Buildings -MEA35-93E. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are tile property of Tyco Safety Products Westminster. Multi-Candela Visible Only (V/0) Appliances (Strobes), Ceiling Mount FIRE Ceiling Mount Addressable V/Os l•i4i9iUUi-ill Multi-Candela TrueAlert addressable strobes provide convenient installation to standard electrical boxes. The strobe is individually addressed and individually controlled with power, supervision, and control supplied from a Simplex fire alarm control panel providing IDNAC Signaling Line Circuits (SLCs ). (See compatibility list on page 3.) @ffli·Ii49·111¥1il·i,1®14l4,13◄ Proper selection of visible notification is dependent on occupancy, location, local codes, and proper applications of: the National Fire Alarm and Signaling Code (NFPA 72), ANSI All7.l; the appropriate model building code: BOCA, ICBO, or SBCCI: and the application guidelines of the Americans with Disabilities Act (ADA). il•l~t·S+i ■◄•J•i4Fllt•IIAMlll€UGi TrueAlert addressable appliances on IDNAC SLCs provide separate visible (and audible) notification using a single two-wire circuit that also confirms connection to the individual notification appliance's electronic circuit. This operation increases circuit supervision integrity by providing supervision that extends beyond the appliance wiring connections. Reduced current allows efficient IDNAC SLC operation. With IDNAC SLCs, a constant 29 VDC source voltage is maintained, even during battery standby, allowing strobes to operate at higher voltage with lower current and ensuring a consistent current draw and voltage drop margin under both primary power and secondary battery standby. Efficiencies include wiring distances up to 2 to 3 times farther than with conventional notification, or support for more appliances per IDNAC SLC, or use of smaller gauge wiring, or combinations of these benefits, all providing installation and maintenance savings with high assurance that appliances that operate during normal system testing will operate during worst case alarm conditions. $4906-0004-4 2/2015 ll•J§t·S+l■i•l·MFlll·ili·t:lilelEl·tiiiMIIII Reducing Installation and Testing Time. With separate controls on the same two-wire SLC, installation time and expense for both retrofit and new construction can be significantly reduced. When Class B wiring is used, wiring can be "T" tapped, allowing more savings in distance, wire, conduit (size and utilization), and overall installation efficiency. Use of the magnet test feature improves installation efficiency. TrueAlert device reports conveniently identify information about each connected appliance. iii11#·3M1141Gii4iilhtwiiill·■®'ffitM Isolator Model 4905-9929 is available for remote mounting on TrueAlert addressable circuits to isolate short circuited wiring from functioning wiring. (Refer to data sheet S4905-0001 for additional information.) iMi-ItPA►iii®'h•II■ Multi-Candela Ceiling Mount Addressable Strobe Housing Color "FIRE" Lettering liili¾itffll·t!Gli4-¥-ilhtl•J6i·lll·hil4-t Test Features. Controllers can be selected to pulse each appliance's LED when it receives a supervision poll. When the controller is selected for diagnostic mode. the appliance magnet test feature provides a response at the individual appliance being tested. Silent Appliance Magnet Test. In this test mode, in response to the magnet test, the appliance LED pulses sequentially to conveniently indicate the appliance's address. Operational Appliance Testing. In this test mode, after the address is indicated by pulsing the appliance LED, the strobe will briefly flash to indicate proper operation. TrueStart Instrument Two (TSIT). The 2nd generation of the Simplex TrueStart Test Instrument adds testing of!DNAC SLC wiring and TrueAlert (and TrueAlert ES) appliances to its ability to test IDCs, NACs, and IDNet communications before connection to the control panel. Please contact your local Simplex representative for additional information. Dimensions Description Model 4906-9202 4906-9204 Red White White Red 4 ¾" X 2 o/is" X 2 ¾" D (121 mm x 75 mm x 67 mm) Multi-Candela Addressable Strobe; intensity selectable as: 15, 30, 75, or 110 candela V10 Adapters (see diagram on page 3) Model 4905-9910 Description Ceiling Mount, Surface Mount Adapter Plate, zinc plated; required for ceiling surface mount Wire Guards (see diagram on page 3) Model 4905-9926· Description Ceiling Mount Red wire guard with mounting plate, compatible with semi-flush or surface mounted boxes * UL listed by Space Age Electronics Inc. iii!i¥irffil1IMIBl44·1·1,d@i4141i94 Service Port REPORT 5 : TrueAlert Device Renart DEVICE POINT ID CUSTOM LABEL TYPE Tl4-1-l Location Label up to 40 characters V/O T14-1-2 Break Room 5 A/V T14-1-3 Boiler Room A/V Tl4 1-4 Elec. Room 7 A/V 2 Dimensions 4 ¾" x 3 ¼" (124 mm x 79 mm) Dimensions 6 ¼" x4¾"x2 ¾" (156mmx111 mmx73mm) Page 1 12:34:56am TUE 27-Jan-15 CANDELA 15 110 75 30 S4906-0004-4 2/2015 IHMll,U ■¢,IHll,ll1l•illlfl§161i·■DfflffilEiit·i,i@i9141134 Single gang box (Wiremold V5744S) 1 2-114" (57 mm) deep, supplied by others Address setting DIPswitch is behind strobe Handy box, 1-112" ( 38 mm) deep (RACO 650 or equal) or single gang box, 2-1/2" (64 mm) deep (RACO 519 or equal) supplied by others Also can be attached to boxes mounted to drop ceiling T-bar with clips (ERICO No. 512 or equal) assembly, select address and strobe candela setting before inserting into housing Q Q Q 4905-9910 Adapter Plate, required for surface ( mount with handy box unless using the 4905-9926 1 v----------1 wire guard Bottom view ~ Magnetic ,--I test location LED indicator • Ceiling mount strobe Optional 4905-9926 wire guard with mounting plate ----------------------------------- ,~..... Strobe intensity viewing slot ( --,., _ · ~-Intensity selection plug, : '. ,-.:::_;. ... · accessible only from rear of lens : housing; factory setting is FACP, L_ ___________ controlled by panel ____________ _ ll•J@t~s+■◄3·1,l@IMl3·1,11·61dffihd@i414113§ Compatible Controllers Data Sheet Controller Output IDNAC SLC Output Appliance Voltage Reference Voltage Design Reference 41 00ES with EPS+ or EPS Power Suoply S4100-0100 4009 IDNAC Reoeater S4009-0004 IDNAC SLC 29VDC 23VDC 4007ES with IDNAC Notification S4007-0002 (regulated) (with 6 VDC drop) 401 0ES with ESS Enhanced System Sunnlv S4010-0011 Etl431h¥Hl·H~i General Specifications (see page 2 for dimensions) Environmental 32' to 122• F (0" to 50' C); 10% to 93%, non-condensing at 100' F (38' C) Connections Installation Instructions Strobe Specifications Typical Operating Voltage Range Supervisory Requirements Flash Rate and Synchronized SLC Loading Candela Setting ~~RMS Current Ratings, for connection to IDNAC Addressable SLCs Terminal blocks for 18 AWG to 12 AWG (0.82 mm' to 3.31 mm'); two wires per terminal for in/out wiring 579-808 23 VDC to 31 VDC, Special Application (see below for 17 VDC rating) 1 unit load (= 0.8 mA control panel current) 1 Hz; with up to 46 synchronized strobes maximum per NAC 15 cd 30 cd 75 cd 110 cd 60mA 92mA 180mA 240mA lii11¥iMll§tffliM ■=W4Wi3·1,,l·hiilffihd@i414,131 Compatible Controller Data Sheet Controller Output Available Strobe Appliance Voltage Reference Intensity Minimum 4100ES or 4100U with TrueAlert Power Supply S4100-0031 4009 TPS, Remote TrueAlert Power Supply S4100-0037 TrueAlert 15,30, 75,and 1ZVDC Addressable SLC 110 cd TrueAlert Addressable Controller (4009T) S4009-0003 Electrical Ratings Difference for Retrofit Applications Voltage Range 17 voe to 31 voe, Special Application Candela Setting 15 cd 30 cd 75cd 110 cd 17 VDC RMS Current Ratings, use when connected to TrueAlert Addressable SLCs per 76mA 128mA 242 mA 328mA above 3 S4906-0004-4 2/2015 TYCO, SIMPLEX. and the product names listed in this material are marks and/or registeredmarh. Unauthorized use is strictly prohibited. NFPA 72 and National Frre Alarm and Signaling Code are registered trademarks of the National Fire Protection Association (NFPA). &.Simplex Tyco Fire Protection Products• Westminster, MA• 01441-0001 • USA W\-11\.-V.simplexgrinnell.com S4906-0004-4 2/2015 C 2015 Tyco Fire Protection Products. All rights reserved. All specifications and other infonnalion shown were currenl as of <kx:umenl revision dale and are subject lO change without notice. LISTING No. CATEGORY: LISTEE: DESIGN: RATING: INSTALLATION: MARKING: APPROVAL: CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 7125-0026:0235 Page 1 of 1 7125 --FIRE ALARM DEVICES FOR THE HEARING IMPAIRED Simplex100 Simplex Drive, Westminster, MA 01441-0001 Contact: Jim Goyette (978) 731-8580 Fax (978) 731-8881 Email: jgoyette@lycoint.com Models "TrueAlert non-addressable" 4904-9331, 4904-9342, 4904-9332, 4904-9343, 4904-9333 and 4904-9344 synchronized strobe lights. Models "TrueAlert non-addressable" 4904-9168, 4904-9171, 4904-9169, 4904-9172, 4904-9170 and 4904-9173 non-synchronized strobe lights. Models "TrueAlert addressable" 4904-9350, 4904-9351, 4904-9352, 4904-9353, 4904-9354, 4909-9355 synchronized strobe lights. Models "TrueAlert addressable" 4904-9356, 4904-9357, 4904-9358, 4904-9359, 4904-9360, 4909-9361 synchronized strobe lights. Models "TrueAlert addressable" 4906-9201, -9202, -9203, -9204, and -9208 synchronized multi-candela strobe lights are intended for indoor use. •Models 4906-9201, -9203 and -9208 are intended for wall mounted only. •Models 4906-9202 and -9204 are intended for ceilingl mounted only. Intended for use with either Model 4209-9401 NAG Extender or with the TrueAlert power supply of Model 41 00U fire alarm control panel. Model 4906-9208 employs two lenses, clear lens for "Fire" and amber for "Non-Fire". Model 4905-9938 sync control module. Refer to listee's data sheet for detailed product description and operational considerations. 4904-9331, -9342, -9350, -9353, -9356, -9359, -9168, -9171: 15cd, 1 Hz. 4904-9332, -9343, -9351, -9354, -9357, -9360, -9169, -9172: 75cd, 1 Hz. 4904-9333, -9344, -9170, -9173, -9352, -9355, -9358, -9361: 110cd, 1 Hz. Models 4906-9201, -9202, -9203, -9204, -9208: 15, 30, 75, 110cd, 1 Hz In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. Intended for indoor use and wall mounting only. Listee's name, model number, electrical rating and UL label. Listed as strobe lights suitable for the hearing impaired when used with listee's separately listed fire alarm control units. For "TrueAlert non-addressable" synchronized strobes, Model 4905-9938 sync control module must be used. "Rev 04-02-15 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2017 DA V/D CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2018 &.,Simplex TrueA/erl Addressable Notification Appliances UL, ULC Listed* li¥iUll4i Individually addressed and controlled Speaker (S/O) and Speaker Visible (SN) notification appliances • Advanced addressable notification controlled by IDNAC SLCs provides regulated 29 VDC for low current operation even under battery backup. • Wiring supervision is electronically monitored and allows audio wiring to be T-tapped for class B wiring, reducing wiring costs and wiring distances. • Speaker selectivity is controlled by the panel. Only those speakers that are needed are connected to the audio NAC. • Separate appliance and cover selection greatly simplifies the ordering and installation process. • Strobe intensity can be programmed from the control panel or the device for SN models. • Self-Test Mode allows on-board sensors to detect the strobe and speaker output and then report their status to the control panel. • Wiring terminals separate from the Audio terminals. • TrueAlert Device Reports at the control panel detailing appliance point ID, custom label, type, and candela setting. • Magnet test diagnostics to assist checkout and testing of appliances and wiring. • Compatibility with ADA requirements. LED indicator and magnet test feature • Appliance LED can be selected to display each polling cycle to indicate appliance supervision • In diagnostic mode, the magnet test pulses the LED to indicate appliance address and pulses to indicate the intensity selection; a brief output of the strobe is also selectable to confirm operation Mechanical design features • Rugged, high impact, flame retardant thermoplastic housings are available for wall or ceiling mount models • Covers are available in red or white with various lettering options • Covers can be easily removed without disturbing the connected housing and avoiding trouble conditions • In/out wiring terminals for 18 A WG to 12 AWG • Mounts to 4" square 2 ¼" gang US electrical boxes • Additional listings may be applicable; contact your local Simplex product supplier for the latest status. listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. Wall and Ceiling Mount Addressable Speaker and Speaker Visible Notification Appliances Ceiling and Wall Mount Addressable Speaker Only and Speaker Visible Strobes li¥ihil4W•i@l@i Speaker design features • High quality voice and tone reproduction with taps for ¼,½,I, or 2 W, at 25 or 70.7 VRMS • Speakers have capacitor input for connection to DC supervised NACs and are wired separately from strobes • Listed to UL I 480 and ULC S54 l * • Compliant with NFPA 72, 520 Hz Low Frequency Signal Requirements for Sleeping Areas • High and low frequency response models available, 200-10000 Hz and 400-4000 Hz respectively. Ui41Nli·Ultlll Wall and ceiling mount addressable speaker and speaker visible appliances provide convenient installation to standard electrical boxes. The speaker is individually addressed and individually controlled with power, supervision, and control supplied from a Simplex fire alarm control panel IDNAC Signaling Line Circuit (SLC). Audio is provided by a panel that supports audio output or from a separate audio source. Appliances use a multi-tapped speaker for audio/tone notification. @®11¥14·111¥ill·l,1@1414,131 Proper selection of visible notification is dependent on occupancy, location, local codes, and proper applications of: the National Fire Alarm and Signaling Code (NFPA 72), ANSI A 117. I; the appropriate model building code: BOCA, ICBO, or SBCCI; and the application guidelines of the Americans with Disabilities Act (ADA). S49SWC-0001-1 11/2015 ll•l@'½i+■i•l·Mblit-ilEGliillEl•ti TrueAlert Addressable speaker and speaker visible appliances on IDNAC SLCs provide visible and audio notification using two separate two-wire circuits that also confirms connection to the individual notification appliance's electronic circuit. This operation increases circuit supervision integrity by providing supervision that extends beyond the appliance wiring connections. Reduced current usage on IDNAC SLCs A constant 29 VDC source voltage is maintained, even during battery standby. This allows appliances to operate at higher voltage with lower current and ensuring a consistent current draw and voltage drop margin under both primary power and secondary battery standby. Efficiencies include wiring distances up to 2 to 3 times farther than with conventional notification, support for more appliances per JDNAC SLC, use of smaller gauge wiring, or combinations of these benefits. Reducing Installation and Testing Time With separate controls on the same two-wire SLC, installation time and expense for both retrofit and new construction can be significantly reduced. When Class B wiring is used, wiring can be "T" tapped, allowing more savings in distance, wire, conduit (size and utilization), and overall installation efficiency. Use of the magnet test feature improves installation efficiency. TrueAlert device reports conveniently identify information about each connected appliance. 69till®t•lllll149·11€1,14=14Ul•NA ►iflGGit-i,M iilll¥itffilflGii4i-Flhtl\+11111ltiffiiffiffil Isolator Model 4905-9929 is available for remote mounting on TrueAlert addressable circuits to isolate short circuited wiring from functioning wiring. Refer to data sheet S4905-000 l for additional information. iil1t¥i tffi 13-1 •lEUI 11th 1141 Test Features Controllers can be selected to pulse each appliance's LED when it receives a supervision poll. When the controller is selected for diagnostic mode, the appliance magnet test feature provides a response at the individual appliance being tested. Silent Appliance Magnet Test The appliance LED pulses sequentially to conveniently indicate the appliance's address when a magnet is applied. Operational Appliance Testing In this test mode, after the address is indicated by pulsing the appliance LED, the strobe will briefly flash to indicate proper operation. TrueStart Instrument Two (TSIT) The 2nd generation of the Simplex TrueStart Test Instrument adds testing of IDNAC SLC wiring and TrueAlert (and TrueAlert ES) appliances to its ability to test IDCs, NACs, and IDNet communications before connection to the control panel. Please contact your local Simplex representative for additional information. Wall Mount S/O Appliances* (Refer to data sheet S49SOW--0001 for full product selection including covers and mounting plates) Model Dimensions Description Data Sheet Reference 49SO-APPLW -BA 5 ½" H x 5" W x 1 ½" D ~S~/~Oc;a~~lia,!!n~c~e~o~n"ll '--c.---,---j *Note: Wall mount models require separately ordered back plate. See related datasheet for details. lifflill,1·■01•1'1111·i-O•J161,14=14i•i•HAiii&4illl,M Ceiling Mount S/O Appliances (Refer to data sheet S49SOC-0001 for full product selection and installation requirements) Model Dimensions . Description Data Sheet Reference 49SO-APPLC -BA 7 ¼" H x 7 ¼" W x 1 ¼" D S/O a liance onl 49HF-APPLC -BA 180 mm x 180 mm x 32 mm Hi h fideli S/O a liance onl s 49soc-ooo1 Ceiling Mount SN Applianc. es (Refer to data sheet S49SV. C-0001 for full product selection and installation requirements) Model Serles Dimensions Description Data Sheet Reference 49SV-APPLC -BA SN a liance onl 49HFV-APPLC -BA "H"cicc:'h "'fid"ce"il"°i ""aSciN'i"a--.l~ia-n-=-ce=-=-on:-;l---- 49SVH-APPLC -BA Hi h Candela SN a liance onl Clear lens high fidelity high candela 49HFVH-APPLC -BA "S"N-'-'a""'"'lia,cne:ce"-"o"'n,_,I ______ S49SVC-0001 8 ¼" H x7 ¼"Wx3" D (206 mm x 180 mm x 76 mm) 49HFVH-APLCA-BA 49HFVH-APLCB-BA Amber lens high fidelity high candela SN a liance onl Blue lens high fidelity high Candela SN a liance onl Note: Select appliance, cover and mounting back plate (where required) separately. (-BA) indicates model is available either with or without the -BA suffix. Model numbers ending in -BA are assembled in the USA 2 S49SWC-0001-1 11/2015 ll•l@f4+■53•ill@IMl3·1,U·€1ilffibd@IAi4,134 Compatible Controllers Data Sheet Controller Output IDNAC SLC Output Appliance Voltage Reference Voltage Design Reference 4100ES with EPS+ or EPS Power Supply S4100-0100 4009 IDNAC Repeater S4009-0004 29VDC 23VDC 4100ES Flex 35, 50, and 100 Amplifiers IDNAC SLC 4100ES Constant Supervision and Signal S4100-0034 ( regulated) (with 6 VDC drop) Cards E•i43111¥0t•UWI General Specifications (refer to individual model data sheets for further specifications, install and operation details) Tvpical Ooeratinq Voltaae Ranae Environmental Connections IDNAC SLC Loading Speaker Specifications lnout Voltaae Power Taos Frequency Response Strobe Specifications Tvnical Ooeratina Voltaae Ranae Suoervisorv Reauirements Flash Rate 23 -30 VOC, Soecial u..nnlication 32° to 120° F (0° to 49° Cl; 10% to 93%, non-condensino at 104° F ,40° Cl Terminal blocks for 18 AWG to 12 AWG (0.82 mm~ to 3.31 mm~): two wires per terminal for in/out wirina. Use Unshielded Twisted Pair (UTP) for IONAC and audio wirino. Maximum of 127 addresses per SLC, 139 unit loads. See device and compatible fire oanel installation instructions for circuit current load limits. 25 or 70.7 Vrms ¼,½,1,and2W 400 to 4000 Hz and 200 to 10000 Hz, respectively. 23 -30 voe, Soecial A ...... lication 1 unit load (= 0.8 mA control panel current) 1 Hz UTP, unshielded twisted oair recommended I General Signaling= 125to 12 kHz IDNAC SLC Wiring Specifications Maximum wire length allowed with "T-Taps" for Class B wiring per SLC = 10,000 ft (refer to control panel installation instructions for l-'t:~3~04~8=m~)--------------------------~ more information) Maximum wire length to any appliance= 4000 ft (1219 m). This can be doubled to 8000ft (2438m) bv usina a 4009 IONAC Repeater. Note: Speakers are for connection to compatible fire alarm audio circuits only. J.1€Ei4114+i·l¥134i•ffiffl,i441#GIAi§,131 Model Wall Mount Speaker Onlv Appliance Wall Mount Speaker Visible Aopliance Ceiling Mount Speaker Only Appliance Ceilina Mount Soeaker Visible Appliance 3 Data Sheet Reference S49SOW-0001 S49SVW-0001 S49SOC-0001 S49SVC-0001 S49SWC-0001-1 11/2015 T'ICO, SIMPLEX. and the product names listed in thi~· material are marks andior registered marks. Unauthorized use is strictly prohibited. NFPA 72 and National Fire Alarm and Signaling Code are registered trademarks of the National Fire Protection Association (NFPA). &.Simplex Tyco Fire Protection Products• Westminster, MA • 01441-0001 • USA www.simplex-fire.com S49SWC-0001-1 11/2015 :1) 2015 Tyco Fire Protection Products. All rights reserved. All specificatmns and other information shown were current as of document revision date and are subject to change without notice. LISTING No. CATEGORY: LISTEE: DESIGN: CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING . BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 7125-0026:0384 Page 1 of 2 7125-FIRE ALARM DEVICES FOR THE HEARING IMPAIRED Simplex100 Simplex Drive, Westminster, MA 01441-0001 Contact: Jim Goyette (978) 731-8580 Fax (978) 731-8881 Email: jgoyette@tycoint.com Models: 49SV-APPLC,49HFV-APPLC,49SV-APPLC-BA,49HFV-APPLC-BA,49SVH-APPLC-BA, 49HFVH-APPLC-BA,49SVH-APPLC,49HFVH-APPLC,49SV-CWF,49HFV-CWF,49SVH-CW F and 49HFVH-CWS True Alert ES, Addressable ceiling mounted Speaker/Strobes. Models: 49SV-APPLW,49HFV-APPLW,49SV-APPLW-BA,49HFV-APPLW-BA,49SV-WRF and 49HFV-WRF True Alert ES, Addressable wall mounted Speaker/Strobes. Models: 49SO-APPLC, 49HF-APPLC, 49SO-APPLC-BA, 49HF-APPLC-BA,49SO-CW and 49HF-CW True Alert ES, ceiling mounted Speakers. Models: 49SO-APPLW, 49HF-APPLW, 49SO-APPLW-BA, 49HF-APPLW-BA,49SO-WRF and 49HF-WRF True Alert ES, wall mounted Speakers. Models: 49SVC-CK,49SVC-CRAL T,49SVC-CRFIRE,49SVC-CRS,49SVC-CRBC,49SVC-CWBC, 49SVC-CWFIRE,49SVC-CRFEU,49SVC-CRBF,49SVC-CWALT,49SVC-CWBA,49SVC-CRB A,49SVC-CWS,49SVC-CWBF and 49SVC-CWFEU True Alert ES, Speaker/Strobe Ceiling Mount Dress Covers. Models: 49SVC-WRAL T,49SVC-WRBA,49SVC-WRBC,49SVC-WRBF,49SVC-WRFEU,49SVC-WRFI RE,49SVC-WRS,49SVC-WWALT,49SVC-WWBA,49SVC-WWBC,49SVC-WWBF,49SVC-W WFEU,49SVC-WWFIRE and 49SVC-WWS True Alert ES, Speaker/Strobe wall Mount Dress Covers. Models: 49SOC-CWFIRE,49SOC-CRFIRE,49SOC-CRS,49SOC-CWS,49SOC-CK,49SOC-CR, 49SOC-CW,49SOC-CWAL T and 49SOC-CRAL T True Alert ES, Speaker Ceiling Mount Dress Covers. 12-08-15 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2017 DA V/D CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2018 RATING: INSTALLATION: MARKING: APPROVAL: Listing No. 7125-0026:0384 Page2 of2 Models: 49SOC-WRFEU,49SOC-WRBF,40SOCWRBC,49SOC-WRBA,49S0C-WWS,49SOC-WWFI RE,49SOC-WRBLANK,49SOC-WRFIRE,49SOC-WRS,49SOC-WWBA,49SOC-WWBC,49S OC-WWBF,49SOC-WWFEU,49SOC-WWBLANK,49SOC-WWAL T and 49SOC-WRALT True Alert ES, Speaker Wall Mount Dress Cover. Models: 49MP-SVWR,49MP-SVWW,49MP-SOWR and 49MP-SOWW True Alert ES.Back Plates. Models: 49SV-LENS-AMBER,49SV-LENS-BLUE,49SV-LENS-RED and 49SV-LENS-GREEN True Alert ES, Colored Lens Kit. Refer to listee's data sheet for detailed product description and operational consideration. 23-30 Vdc In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. Listee's name, model number, electrical rating and UL label. Listed as signalling devices for the hearing impaired when used with listee's separately listed electrically compatible fire alarm control units. For indoor use only. Refer to listee's Installation Instruction Manual for details. 12-08-15 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2017 DA V/D CASTILLO, Program Coordinator Fire Engineering Division Listing Expires June 30, 2018 • License Number • 1:f./!;!'J,,xGrlnne/1 986047 Business Information JOHNSON CONTROLS FIRE PROTECTION LP P OBOX3042 BOCA RATON, FL 33431 Business Phone Number:(562) 405-3800 Entity Partnership Issue Date 08/14/2013 Expire Date 08/31/2019 license Status This license is current and active. All information below should be reviewed. Class1f1cat1ons • C10 -ELECTRICAL • C16 -FIRE PROTECTION CONTRACTOR Bcnd1n Information SimplexGrinne/1 LP 3568 Ruffin Road, South San Diego, CA 92123-2597 Tele: (858) 633-9100 Fax: (858) 633-9101 www.simplexgrinnell.com il '.-: . . . . " .. -: This license filed a Contractor's Bond with FEDERAL INSURANCE COMPANY. Bond Number: 82332032 Bond Amount: $15,000 Effective Date: 01/01/2016 Contractor's Bond History • This license filed Bond of Qualifying Individual number 82332031 for RONALD GILBERT MAYLE in the amount of $12,500 with FEDERAL INSURANCE COMPANY. Effective Date: 08/13/2013 • This license filed Bond of Qualifying Individual number 82332035 for TIMOTHY PAUL ROSTEN in the amount of $12,500 with FEDERAL INSURANCE COMPANY. Effective Date: 08/13/2013 Workers' Com ensatIon This license has workers compensation insurance with the OLD REPUBLIC INSURANCE COMPANY Policy Number:MWC308342 Effective Date: 10/01/2016 Expire Date: 10/01/2017 Workers' Compensation History Other Personnel listed on this license (current or d1sassoc1ated) are listed on other licenses • SimplexGrinnell LP 1:1.J:i~"!exGtinnell 3568 Ruffin Road, South San Diego, CA 92123-2597 Tele: (858) 633-9100 Fax: (858) 633-9101 www. simplexgrinne/1. com SIMPLEXGRINNELL WARRANTY WARRANTY & DAMAGES: SimplexGrinnell hereby warranties for one (1) year from the date of beneficial use or eighteen (18) months from date of delivery to the purchaser to replace, or at its option, to repair any equipment or parts thereof which are found to be defective in material or workmanship. This warranty is made to the purchaser of this equipment and is in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability of fitness for a particular purpose. SimplexGrinnell shall not be liable for any direct, incidental or consequential loss of damage to the purchaser or user of this equipment arising out of the failure of the equipment to operate in excess of the purchase price of said equipment. This warranty is solely limited to the equipment as provided by SimplexGrinnell in this submittal and excludes associated field wiring and/or any equipment to which the submitted equipment may be attached or connected. WARRANTY SERVICE HOURS: 10/4/2016 -8:00AM TO 17:00PM, MONDAY THROUGH FRIDAY, EXCLUDING LOCALLY OBSERVED SIMPLEX HOLIDAYS. OFF HOURS RESPONSE IS AVAILABLE AT EXTRA COST REV.#: 0 PROJECT#: 480-XXXXXX-XX / XXXXXXXXX ..