HomeMy WebLinkAbout1940 CAMINO VIDA ROBLE; ; FPC2019-0274; Permitof
PERMIT REPORT C arlsbad
Print Date: 09/23/2021
Job Address: 1940 CAMINO VIDA ROBLE, CARLSBAD, CA 92008-6516
Permit Type: FIRE-Construction Commercial Work Class: Fire Alarm
Parcel #: 2120921300 Track #:
Valuation: $0.00 Lot #:
Occupancy Group: Project #:
#of Dwelling Units: Plan #:
Bedrooms:' ' Construction Type:
Bathrooms: Orig. Plan Check #:
Plan Check #:
Project Title:
Description: CAL COMP USA -MONITOR SUPPRESSION SYSTEM
Permit No: FPC2019-0274
Status: Closed - Finaled
Applied: 12/11/2019
Issued: 01/07/2020
Finaled Close Out: 09/23/2021
Inspector:
Final Inspection:
Applicant: FPContractor:
BAY ALARM COMPANY BAY ALARM COMPANY
TIM GIOUTLOS 8205 RONSON RD, # STE F
8205 RONSON RD, # STE F SAN DIEGO, CA 92111-2014
SAN DIEGO, CA 92111-2014 (858) 586-3803
(858) 231-6895
FEE ' AMOUNT
FIRE Sprinkler Monitoring ' ' $383.00
Total Fees: $383.00 Total Payments To Date: $383.00 Balance Due: $0.00
Fire Department Page 1 of 1
1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 760-602-8561 f I www.carlsbadca.gov
8205 Ronson Rd. Ste F
San Diego, CA 92111
(800) 470-1000
Contractor License # 880138
PROTECTED PREMISE
CAL COMP USA
1940 CAMINO VIDA ROBLE
CARLSBAD, CA 92008
MONITORING COMPANY
Bay Alarm Company
5130 Commercial Circle
Concord, CA 94520
800-470-1000
California Alarm Operating License
Number: ACO28
EQUIPMENT SUPPLIER & INSTALLER
8205 Ronson Road, Suite F
San Diego, CA 92111 1 (800) 470-1000
Contractor License # 880138
DMP.COM 0 0 0 0 0 0 @DMPALARMS
Zone Expansion Modules
FEATURES -
• your DMP panel
options with a wide array of - Provides Class B zones for Easily mount attractive cases Data LED on zone expander
expansion u' burglary and fire on wall or three-gang box indicates good
Compatible with DMP Panels Compatible with all panel
panel communication
- burglary zones. that allow zone expansion zone types Durable and attractive plastic
eonnectrr.non-powered Suitable for mounting near - - Easy connection to four-wire
or metal housing - - - ---
I • type devices protection devices_ -
burglary
- __keypad or. LX-Busm - .Low current draw - for intrusion,I • I •. and
motion d • - Connect devices using Proven design ensures - - Can be powered from panel
-wire bus _four - stability.and performance - -= —orauxiliary power supply____________ Add I12 !il1t4IJiIs —--. -_-----
----- -addressable two-wire smoke
-- • I with 715 modules.- -
- ---- __
MMMP DMP.COM 0 0 0 0 0 0 @DMPALARMS
USE ON THE DMP LX-BUS
The modules can be used on the LX-Bus
of DMP panels. The modules connect to
the four-wire bus and use only one zone
address. To assign an additional zone
expander use the next available
zone address.
CONNECT TO KEYPAD BUS
You can also use the modules as an
addressed device on the keypad data
bus of DMP control panels.
Simply set the module to an available
keypad address and connect the wiring
to the appropriate screw terminals.
SIMPLE ADDRESSING
Address the 711, 714, 714-8, 714-16, 715,
715-8, and 715-16 modules by setting two
onboard rotary switches with a small
screwdriver. The 712-8 uses slide
dip switches.
EASY INSTALLATION
Zone expansion modules are mounted
in a decorative plastic housing suitable
for installing outside the panel enclosure,
such as on walls or single gang boxes.
After all wiring connections are made,
the covers go on to form tight-fitting
protection against incidental contact or
tampering.
714-8, 714-16, 715-8, and 715-16 Zone
Expanders are housed in a rugged,
20-gauge, cold-rolled steel enclosure.
You may also mount the 708 and
710 modules inside a DMP enclosure
using the three-hole configuration
and the provided standoffs. The 712-8
only mounts using the three-hole
configuration and provided standoffs.
ZONE PROGRAMMING
Program the zone on the modules with
any of the panel's available zone types
for use in burglary applications including
arming type zones when used with
keyswitches.
The expansion zones are programmable
for annunciation on DMP keypads
connected to the panel. Each zone can
also be individually programmed to
report alarms, troubles, and restorals to
remote DMP SCS-1R Receivers.
108 BUS EXTENDER MODULES
The 708 Bus Extender Modules allow
you to increase the length of wire used
to run an LX-Bus or keypad bus by a
maximum of 4,000 feet, while providing
immunity to noise on the wires. This
model comes as a pair of modules that
connect between the panel and LX-Bus
or keypad bus devices.
Use the 708 modules for applications
that include running wire over long
distances, through noisy environments,
or where the bus is bundled with other
wires, such as telephone company wire.
The 708 extender can be used on all
DMP panels.
.•,
ai,L :1
708 FEATURES
Extends keypad Bus or LX-bus by 4000 feet with one
pair of modules
Connects to an auxiliary power supply for added
power
Uses existing wire: No need to run additional wire
Allows twisted pair and/or shielded wire between
the 708 modules
710 BUS SPLITTER/REPEATER MODULE
The 710 Bus Splitter/Repeater Module
allows you to expand the typical LX-Bus
or keypad bus installation both in the
number of devices and the length of the
wire used. Each 710 module provides
three bus connections up to 2,500
feet. When using multiple modules, the
total distance of all circuits can be an
incredible 15,000 feet!
001
710
As a splitter, the 710 provides superior
mechanical wire connecting capability
for up to three additional 12 VDC LX-
Bus or keypad bus circuits. This makes
the 710 module an excellent junction
box when terminating multiple LX-Bus/
keypad bus runs at one location.
As a repeater, the 710 module can be
installed at the end of an LX-Bus or
keypad bus circuit to allow an additional
circuit to be added, thus increasing the
total wire length.
712-8 ZONE EXPANSION MODULE
Expand your system at an affordable
price! You can connect non-powered
burglary devices to DMP panels using
the 712-8 Module. It is compatible with
many intrusion contacts, glassbreak
detectors, motion detectors, and
intrusion detectors.
712-8 FEATURES
Eight grounded, addressable burglary zones
Set jumper for IX-Bus or keypad bus operation
Compatible with all DMP panels
Expand systems by daisy-chaining a second 712-8
Easily address using dip swftches
Snaps into panel enclosure using three-hole pattern
Separate zone 1K End-of-line resistors included
714/715 ZONE EXPANDERS 114-8, 714-16, 715-8, AND 715-16 711-DESCRIPTION
The 714 contains four Class B burglary The expanders are housed in a model The 711 Zone Expansion Module connects
zones and is suitable for use with 340 locking metal enclosure suitable to the panel's four-wire keypad bus or
burglary and fire devices that are for mounting in a remote location. Each LX-Bus and is set to an address that
normally opened or normally closed, expander provides screw terminal determines the reporting zone number.
Individual zones are supervised with strips for zone inputs and data bus The 711 provides one Class B zone for the
1 k ohm End-of-Line (EOL) resistors and connections,-a two position jumper to connection of detection devices. -
can be programmed with any burglary or designate connection to the keypad bus
fire zone type. or the LX-Bus, and an LED to indicate
The 715 contains four Class B powered communication with the panel. Separate
zones and is suitable for use with zone EOL resistors are included with 'J
12 VDC, two-wire smoke detectors, each expander.
and non powered fire or burglary
devices. Individual zones on the 715 are
supervised with a 3.3 k ohm EOL resistor -
and can be programmed with any : 711 FEATURES
burglary or fire zone type.. Single-zone expander
OPTIONAL ACCESSORIES . . . - . Rugged screw terminals accommodate
The standard wiring harness can be . 14- 22- AWG wire
replaced with the optional 718T Plug-in 714 8/71416 EXPANDERS Board fits inRadionicsPOPllhousing
Screw Terminal. . The 714-8 Expander contains eight Class Easy rotary switch addressing
B zones. The 714-16 Expander contains 16 The enclosure can also accommodate the Class B zones. Both are suitable for use 711S DESICRIPTION 719T Terminal Boards for the 714 or the
720T Terminal Boards for the 715, which with normally open or normally closed The 711S Zone Expansion Module is a
pass through the wiring of the panel's burglary and fire devices. Individual flying lead style, single-zone, addressable
LX-Bus. 1 K EOL resistors are included zones are supervised with a 1 k ohm EOL expansion module that allows you to
with the 719T and 3.3 K resistors are resistor and can be programmed as any increase the number of reporting zones
included with the 7201. zone type. available on XT30/50 and XR150/550
or,ic i.c ninrnc Series panels. It's ideal for smaller
-- 715-8/715-16 I i.riu LAfliI1IJLR.) applications, such as installing in a pull
The 715-8 Expander contains eight Class station back-box or even in a recessed
B powered zones. The 715-16 Expander contact hole behind the contact. The
- contains 16 Class B powered zones. Both modules connect to the panel is four-
are suitable for use with 12 VDC two- wire keypad bus or LX-Bus and are set to
- wire devices, such as smoke detectors an address that determines the reporting
- - . or with non-powered fire or burglary zone number. The 711S provides one Type
devices, Individual zones are supervised A Class B zone.
with a 3.3 k ohm EOL resistor and can be
programmed as any zone type.
714-8, 714-16, 715-8, AND
714/715 FEATURES . 715-16 FEATURES • •
Four protection zones on each module 8 or 16 protection zones per expander .
Comes with 12-conductor wire harness Durable metal enclosure housing with lock and key
Optional 12-position screw terminal Individual screw terminals accommodate 14-22-
0 gauge wire for easy connection r
•
Suitable for mounting ina remote location - -- .. 0•
- ...........-
.- .-- •.-.--.---.--.- ---- .
-.--- - - -
.-- --T .---- -.--' ---.—.-----t- .......-.- ..-- . ---- - - ---. . -
- -------------- *
ZONE EXPANSION MODULES
ZONE EXPANSION MODULE COMPARISON CHART
Refer to the chart below for a comparison of the features for each DMP Zone Expansion Module.
Module Address Numberi Zones tfl[• Plastic Case Operating Voltage (ompatible Panels
108 N/A N/A Yes Yes 12V0( All DMP
110 N/A N/A Yes Yes 12 VD(
112-8 Dip Switch 8 Yes No 12 VDC
ill Rotary 1 No Yes 12 VD(
illS Rotary 1 No No 12 VD(
114 Rotary 4 (lass B No Yes 12 VD( 1 Series and OR Series
714-8 Rotary 8 (lass 8 No Metal Enclosure 12V0(
114-16 Rotary 16 (lass B No Metal Enclosure 12 VDC
115 Rotary 4 (lass B No Yes 12 VD(
115-8 Rotary 8 (lass B No Metal Enclosure 12 VEX
715-16 Rotary 16 (lass B No Metal Enclosure 12 VD(
108 (Non-UL) Bus Extender Module
Operating Voltage 8.8 to 15.0 VD(
Operating Current 20 mA per pair
Dimensions 4.5" W x 2.75' H x 1.150
Maximum Distance 4,000 feet between the
two 708 modules
110 Bus Splitter/Repeater Module
Operating Voltage 8.8 to 15.0 VDC
Operating Current 30 mA
Dimensions 4.5 W 2.15 H x 1.15" D
Distance 2500 feet (one module),
15,000 feet maximum
111 Zone Expansion Module
Operating Voltage 8.8 to 15.0 VDC
Operating Current
Average 11 mA + 1.6 mA per active zone
Alarm 11 mA + 2 mA per zone in alarm
Lone Voltage 5 VDC 0.6 mA across EOI)
Dimensions 4.5 W x 2.15 H x 1.75" 0
illS Zone Expansion Module
Operating Voltage 8.8 to 15.0 VDC
Operating Current
Standby 4.2 mA
Alarm 4.1 mA
Zone Voltage 5 VDC, max 2 mA
Dimensions 1.25 W x 2.15 H
112-8 Zone Expansion Module
Operating Voltage 8.8 to 15.0 VDC
Current Draw 17mA±1.6rnA per active zone
11 mA2 mA per zone in alarm
Dimensions 45' H x 2.5" W
714/715 Zone Expansion Module
Operating Voltage 8.8 to 15.0 VDC
Operating Current
714 Average 1 mA + 1.6 mA per zone
Alarm 1mA2mA per zone
115 Average 1 mA4mA per zone 0.1
per 2-wire smoke
Alarm 1 mA + 58 mA per shorted zone + 0.1 per
2-wire smoke + 30 mA per smoke in alarm
Dimensions 4.5W x 2.15" H 1.150
714-8,714-16,715-8, and 715-16 Zone Expansion Modules
Operating Voltage 8.8 to 15.0 VOC
Operating Current
714-8/16
Average 20 mA + 1.6 mA per zone
Alarm 20 mA + 2 mA per zone
115-8/16
Average 20mA+4mA per zone O.1 per 2-wiresmoke
Alan 2OmA58mA per shorted zone 0.1per
Enclosure
Dimensions
114-814 Color
115-8116 Color
Certifications
Refer to the appropriate panel programming
and installation guide for specific compliance listings
for installation and programming requirements
necessary to meet a particular approval.
- California State Fire Marshall (CSFM)
New York City (FDNY COA #6161) (711, 114,715 only)
Underwriters Laboratories (UL) Listed
For additional information go to
DMP.(om/Compliance.
2-wire smoke 30 mA per smoke in alarm
20-gauge cold-rolled steel
12.5"W 11.5"H 3.5" D
Gray 800-641-42821 DMP.com
Red 2500 N. Partnership Blvd, Springfield, NO 65803
Designed, engineered & manufactured In Springfield, MO
using U.S.& global components
UNITED WARRANTY: DMP warrants that the products
manufactured by DMP and described herein shall be free
from detects of manufacture, labeling, and packaging fora
period of three (3) years from the invoice date to the original
Buyer, provided that representative samples of the defective
products are returned to DMP for inspection To read the full
DMP Limited Warranty, go to DMP.coniAvarranty or dieck the
DMP Price List orCatalog. -
@2019 Digital Monitoring Products, Inc. I LT-0232119M
RLDUCTS, fl
INC.
\DE
[ncIosuresJ
and Custom Fabrication - *
çiDrive-Alert
\./' Vehicle Detection Systems
Custom Desigr3
and tabncation
Modified Mier BW-1 @6 for Bay Alarm
12'W x 12"H x 4"
affiglib Red Texture Powder-®oat
"SYSTEM RE®®R ®®UMENTS" graphic printed in
white, on two lines, on the door
Rugged construction & 1®.5-inch, one-piece, piano hinge
for added strength
Key holes for quick and easy mounting
1/4-Turn Thumb-Latch installed, as well as holes in place
for bolting the door shut. Will also work with Mier's cam
locks
Two electrical knockouts on left side, right side, and back
as well as one electrical knockout on top and on bottom
U!B11Th t1tiitii ® _____
(:=7=
:=
of
_________ .'T; •"*'
:
!
. 0
-
- .......
-
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. 7165-1157:0135 . Page 1 of 2
CATEGORY: 7165- FIRE ALARM CONTROL UNIT (COMMERCIAL)
LISTEE: Digital Monitoring Products2500 N. Partnership Blvd, Springfield, MO 65803
Contact: Brad Tucker (417) 831-9362 Fax (417) 831-1325
Email: btucker@dmp.com
DESIGN: Models XR150, XR350 and XR550 combination fire and burglary alarm control units. Local,
remote station, proprietary and central station services. Models may have a combination of
the following suffixes: 0 (dialer), N (network), E (encryption) or FC (fire control). Refer to
listee's data sheet for additional detailed product description and operational considerations.
System components:
XR150, XR350, XR550: Main Board
341, 349, 350, 350A, 352P 352X: Enclosures
352S: Battery Enclosure
630F: Supervised LCD Keypad
7070, 7070A, 7073, 7073A, 7170, 7170A, 7173, 7173A, 7570, 7570A, 7573, 7573A: LCD
Keypads
325: Transformer Bracket
322, 323, 324, 324P, 327: Transformers
711, 714, 714-8, 714-16, 715, 715-8, 715-16: Zone Expanders
*711S: Zone Expander (NOT for use with XR350)
Output Expander
Annunciator Module
860 Relay Module
893A: Dual Phone Line Module
734, 734N: Wiegand Interface
710: Bus Splitter
270: Network Transient Suppression Module
277: Trouble Sounder
9060, 9063: Wireless Keypads
263C, 2631-1: Cellular Communicator (May be used as the standalone primary communicator)
263LTE: Cellular Communicator (NOT for use with XR350) (May be used as the standalone
primary communicator)
865, 866, 867: Indicating Module
869: Initiating Module
303: Reset/Silence Switch
1100X, 1100XH: RF Wireless Receiver
1100R: Wireless Repeater
1103: Wireless Transmitter
Rev 04-05-19 gt
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements. or installation criteria. Refer to listee's data sheet, installation instructions and/or other
-. Date Issued: July01, 2019 Listing Expires June 30, 2020
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division
Listing No. 7165-1157:0135
Page 2 of 2
1135: Wireless Siren
RATING: 120 VAC, 0.5 A, 60 Hz
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listee's name, model number, rating and UL label.
APPROVAL: Listed as combination fire and burglary alarm control units for use with separately listed
electrically compatible initiating and indicating devices. Refer to listee's Installation
Instructions Manual for details.
NOTE: 1. The Fire Alarm Verification Feature (delay of fire alarm signal), the maximum
Retard/Reset/Restart period shall not exceed 30 seconds.
2. Burglary and other non-fire functions were not examined.
Rev 04-05-19 gt
This listing is based upon technical data submitted by the - applicant. - - CSFM Fire Engineering staff has reviewed -
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational.. requirements or installation-criteria. - Refer to—listee's data sheet,._ installation instructions—and/or.- other --
Date Issued: July 01, 2019 - -- --
Listing Expires June 30, 2020 -
Authorized By: DAVID CASTILLO, ProgramCoordinator
Fire Engineering Division