Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2177 SALK AV; 200; AS070116; Permit
10/20/21, 4:54 PM AS070116 Permit Data City of Carlsbad Sprinkler Permit Permit No: A5070116 Job Address: 2177 SALK AV Status: ISSUED Permit Type: SPRINK Applied 4/25/2007 Parcel No: 2120210300 Approved: 4/25/2007 Lot #: 0 Reference No.: Issued: 4/25/2007 PC #: Inspector: Project Title: EISI SUTE 200 T.I. FIRE SPRINKLER PLAN CHECK & INSPECTION Applicant: Owner: RIO SD PLAZA II MASTER LLC C/O NEWPORT NATIONAL CORPORATION 1525 FARADAY AVE #100 CARLSBAD CA Fees ($) Add'I Fees ($) Total ($) Balance ($) 124 0 .124 0 0 1/1 August 4, 2006 Sprinkler 41 a PRODUCT NAME MICROFAST® AND MicrofastHP® QUICK RESPONSE PENDENT SPRINKLERS tThe Sprinkler Identification Number (SIN) is stamped on the sprinkler deflector. MANUFACTURER THE VIKING CORPORATION 210 N. Industrial Park Road Hastings, Michigan 49058, U.S.A. Telephone: (269) 945-9501 Technical Services: (877) 384-5464 Fax: (269) 945-9599 e-mail: techsvcs©vikingcorp.com PRODUCT DESCRIPTION Viking Microfast® and MicrofastHP® Quick Response Pendent Sprinklers are small thermosensitive glass bulb spray sprinklers available in various finishes, temperature ratings, and orifice sizes to meet design requirements. The special Poly finishes and Teflon® coatings can be used in decorative applications where colors are desired. In addition, these finishes have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant as indicated in the Approval Chart. (Note: FM Global has no approval classification for Teflon® and Poly finishes as corrosion resistant.) The pip cap and sealing assembly of the sprinkler are held in place by the glass bulb operating element. During fire con- ditions, the heat-sensitive liquid in the glass bulb expands, causing the bulb to shatter, releasing the pip cap and sealing spring assembly. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control the fire. TECHNICAL DATA LISTINGS AND APPROVALS cULus Listed: Category VNIV FM Approved: Class 2020 Refer the Approval Chart on page 41 c and Design Criteria on page 41 d for cULus and FM approval requirements that must be followed. CHARACTERISTICS Minimum Operating Pressure: 7 psi (0,5 bar) Maximum Working Pressure: Sprinklers 12282 and 12290 are rated for use with water working pressures ranging from the minimum 7 psi (0,5 bar) up to 250 psi (17,2 bar) for high-pressure systems. High-pressure (HP) sprinklers can be identified by locating "250" stamped on the deflector. All other Part Nos. not mentioned above are rated to a maximum 175 psi (12 bar) wwp. Factory tested hydrostatically to 500 psi (34,5 bar) Testing: U.S.A. Patent No. 4,831,870 Thread size: Refer to the Approval Chart Nominal K-Factor: Refer to the Approval Chart Glass-bulb fluid temperature rated to -65 °F (-55 °C) Overall Length: Refer to the Approval Chart Frame Casting: Brass UNS-C84400 Deflector: Brass UNS-051000 or Copper UNS-C19500 for Sprinklers 06662B, 06666B, 06765B, and 12104. Copper UNS-C19500 for Sprinkler 12282. Brass UNS-C26000 for all other Sprinklers. Bushing (for Sprinklers 06718B, 06720B, and 12290): Brass UNS-C36000 Note: Units of measure in parentheses may be approximations. Replaces page 41 a-b, dated November 18, 2005 (Reformatted, added Form No. F_081296 135 °F temperature rating, and added CE approval for sprinkler 0666613.) Sprinkler 41 b August 4, 2006 TABLE 1 AVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES Sprinkler Temperature Sprinkler Nominal Maximum Ambient U Bulb Color Classification Temperature Rating Ceiling Temperature2 Ordinary 135 °F (57 °C) 100 °F (38 °C) Orange Ordinary 155 °F (68 °C) 100 F (38 °C) Red Intermediate 175 °F (79 °C) 150 °F (65 °C) Yellow Intermediate 200 °F (93 °C) 150 °F (65 °C) Green High 286 °F (141 °C) 225 °F (107 °C) Blue Sprinkler Finishes: Brass, Chrome-Enloy®, White Polyester. (White Poly finish for Sprinkler 06662B), Black Polyester (Black Poly finish for Sprinkler 06662B), and Black Teflon® Corrosion-Resistant Coatings3: White Polyester (White Poly finish for Sprinkler 06662B only), Black Polyester (Black Poly finish for Sprinkler 06662B), and Black Teflon® The sprinkler temperature rating is stamped on the deflector. 2 Based on NFPA-13. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the Authority Having Jurisdiction. Refer to specific installation standards. 3 The corrosion-resistant coatings have passed the standard corrosion test required by the approving agencies indicated on page 41 c. These tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are compatible with or suitable for the proposed environment. For automatic sprinklers, the coatings indicated are applied to the exposed exterior surfaces only. Note that the spring is exposed on sprinklers with Poly finishes and Teflon® coatings. Bulb: Glass, nominal 3 mm diameter Belleville Spring Sealing Assembly: Nickel Alloy, coated on both sides with Teflon Tape Screw: Brass UNS-C36000 Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-530400 Pip Cap Attachment: Brass UNS-C36000 Ejector Spring (for Sprinkler 12104): Stainless Steel For Teflon® Coated Sprinklers: Belleville Spring-Exposed, Screw-Nickel Plated, Pip Cap-Teflon® Coated For Poly Coated Sprinklers: Belleville Spring-Exposed AVAILABLE FINISHES AND TEMPERATURE RATINGS: Refer to Table 1 above. 5. ORDERING INSTRUCTIONS (Also refer to the current Viking price list.) Order Microfast® Quick Response Pendent Sprinklers by first adding the appropriate suffix for the sprinkler finish and then the appropriate suffix for the temperature rating to sprinkler base part number. Finish Suffix: Brass = A, Chrome-Enloy® = F, White Poly Finish = M-/W, Black Poly Finish = M-/B, and Black Teflon® = N Temperature Suffix (°FPC): 135°/68° =A, 155°/68° = B, 175°I79° = 0, 200°/93° = E, and 286°/141° = G For example, Sprinkler VK302 with a 1/2" thread, Brass finish and a 155 °F/68 °C temperature rating = Part No. 06662BAB. ACCESSORIES (Also refer to the 'Sprinkler Accessories" section of the Viking data book.) Sprinkler Wrenches: Standard Wrench: Part No. 10896W/B (available since 2000). Wrench for coated and/or recessed sprinklers: Part No. 12144W/B** (available since 2003) NOTE: Recessed pendent sprinklers with protective caps must use wrench 12144W/B. *A 1/2 ratchet is required (not available from Viking). Sprinkler Cabinets: Six-head capacity: Part No. 01724A (available since 1971) Twelve-head capacity: Part No. 01725A (available since 197 1) IPI August 4, 2006 Sprinkler 41 c Approval Chart rWr KEY Microfast and MlcrofastHP®Ourck Response Pendent Sprinklers [ 5Q1$ppt.,) Maximum 175 PSI (12,1 bar) WWP Base Part Overall Length Listings and Approvals3 Number' SIN Thread Sized Nominal _________ K-Factor ____________ (Refer also to Design Criteria on page 41 d.) NPT I BSU.S. I metrIC2 1 Inches I mm cULus4 I FM5 I NYC' I VdS I LPCB I CE Standard Orifice 06662B I VK302 1 1/2" 115 mm 1 5.6 I 80,6 ] 2-1/4 I 58 JA1X, B1YIA4X, B4YIA1X, B1YI F2 I A4X IC4X, 04Y121 C4X, D4Y14 Large Orifice 06666B VK352 3/4" 20 mm 8.0 115,2 2-3/8 60 A3X, B3Y A2X, B2Y A3X, B3Y - -- E412 -- 12104 1 VK352 3/4" 20 mm 8.0 115,2 2-1/4 1 58 -_ -- - F2 - - -- 06765B VK352 1/2" 115 mm 8.0 115,2 2-3/8 60 A3X, B3Y - A3X, B3Y - -- -- - Small Orifice6 06718139 VK329 1/2" 115 mm 2.8 40,3 1 2-3/16 1 56 IA3X,B3YI A2X A3X, B3Y - - - - 06720139 1 VK331 1 1/2" 115 mm 1 4.2 60,5 1 2-1/4 58 IA3X,B3YI A3X, B3Y - -- -- -- 06932B VK331 -- 10 mm 4.2 60,5 2-3/8 60 -- -- -- F2 -- F213 -- I Maximum 250 PSI (17,2 bar) WWP Standard Orifice Base Part Thread Size Nominal Overall Length Listings and Approvals3 Number' SIN K-Factor (Refer also to Design Criteria on page 41 d.) NPT I BSP U.S. metric2 Inches mm CULUS4 I FM I NYC1° JVdSJLPCBJ CE 12282 VK317 1/2" 115mm 5.6 1 80,6 2-1/4 58 A3X, B3Y I -- A3X - -- -- -- Maximum 250 PSI (17,2 bar) WWP Small Orifice8 122901 1 VK342 1 1/2" 115 mm I 2.8 1 40,3 1 2-3/16 I 56 IA3X, B3YI -- I A3X -- Approved Temperature Ratings A- 135°F (57 °C), 155°F (68 °C), 175°F (79 °C), Approved Escutcheons 200 °F (93 °C), and 286 °F (141°C) Approved Finishes X - Standard surface-mounted escutcheon B -135 °F(57 °C), 155 °F(68 °C), 175 °F(79 °C), 1 - Brass, Chrome-Enloy®, White Poly Finish7, or the Viking Microfast® Model F-i and 200 °F (93 °C) Black Poly Finish7, and Black Teflon01 Adjustable Escutcheon" C -155°F (68 °C), 175 °F(79 °C), 200°F (93 °C), 2 - Brass and Chrome-Enloy® Y - Standard surface-mounted escutch- and 286 °F (141°C) 3 - Brass, Chrome-Enloy®, White Polyester7, eon or the Viking Microfast® Model 0 - 155 °F (68 °C), 175 °F (79 °C), and 200 °F Black Polyester7, and Black Teflon®7 F-i Adjustable Escutcheon or re- (93 °C) 4 - Brass, Chrome-Enloy®, White Poly Finish, cessed with the Viking Micro- E - 155 °F(68 °C), 175 °F (79 °C), and 286 °F and Black Poly Finish matic® Model E-1 or E-2 Recessed (141°C) Escutcheon F- 155 °F (68 °C) Footnotes 1 Base part number is shown. For complete part number, refer to Viking's current price schedule. 2 Metric K-factor shown is for use when pressure is measured in bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. 3 This table shows the listings and approvals available at the time of printing. Check with the manufacturer for any additional approvals. "Listed by Underwriters Laboratories Inc. for use in the U.S. and Canada. 5 FM Approved for use only in wet-pipe sprinkler systems (or preaction systems qualifying as wet systems) for protection of occupancies described in the Factory Mutual Engineering and Research Loss Prevention Data Sheets and Technical Advisory Bulletins. 6 Accepted for use, City of New York Board of Standards and Appeals, Calendar Number 219-76-SA. cULus Listed as corrosion resistant. 8 Listings and Approvals limited to Light Hazard Occupancies where allowed by the installation standards being applied, with hydraulically calculated wet systems only. The sprinkler orifice is bushed. 10Accepted for use, City of New York Department of Buildings, MEA 89-92-E, Vol XVI. "The Viking Microfast® Model F-i Adjustable Escutcheon is considered a surface-mounted escutcheon because it does not allow the fusible element of the sprinkler to be recessed behind the face of the wall or ceiling. Certified, Standard EN 12259-1, EC-certificate of conformity 0832CPD-2001and 0832-CPD-2003. Certified, Standard EN 12259-1, EC-certificate of conformity 0786-CPD-40130. 140 MED Certified, Standard EN 12259-1, EC-certificate of conformity 0832-MED-1003 and 0832-MED-1008. MIN **A 1/2" ratchet is required (not available from Viking). Carefully slide the wrench sideways around the protective cap, ensuring engagement with the sprinkler wrench flats. Figure 2: Wrench 12144W/B for Installing Coated and/or and Recessed Pendent Sprinklers Wrench - Flat Protective Sprinkler Cap Figure 1: Standard Sprinkler Wrench 10896W/13 dmL AW Wrench 12144W1B** for . installing coated and/or ______ recessed sprinklers with protective caps. ,.,J Sprinkler 41 d August 4, 2006 DESIGN CRITERIA fAlso refer to the Approval Chart on page 41 c) cULus Listing Requirements: Quick Response Pendent Sprinklers are cULus Listed as indicated in the Approval Chart for installation in accordance with the latest edition of NFPA 13 for standard spray sprinklers. Designed for use in Light and Ordinary Hazard occupancies (exception: small orifice sprinklers are limited to Light Hazard where allowed by the installation standards being applied, with hydraulically calculated wet systems only). The sprinkler installation rules contained in NFPA 13 for standard spray pendent sprinklers must be followed. FM ADoroval Requirements: Quick Response Pendent Sprinklers are FM Approved as indicated in the Approval Chart for use only in wet-pipe sprinkler systems (or preaction systems qualifying as wet systems). For installation in accordance with the latest applicable FM Loss Prevention Data Sheets and Technical Advisory Bulletins. FM Global Loss Prevention Data Sheets and Technical Advisory Bulletins contain guidelines relating to, but not limited to: minimum water supply requirements, hydraulic design, ceiling slope and obstructions, minimum and maximum allowable spacing, and deflector distance below the ceiling. NOTE: The FM installation guidelines may differ from cULus and/or NFPA criteria. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to page QRI-2 for general care, installation, and maintenance information. Viking sprinklers are to be installed in ac- cordance with the latest edition of Viking technical data, the appropriate standards of NFPA, FM Global, LPCB, Assemblee Pleniere, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. August 4, 2006 Sprinkler 41 e Ceiling Opening Size: 2-5/16" (59 mm) Minimum, I 2-1/8 "i 2-1/2" (64 mm) Maximum. (54 mm) (15 m" NPT 1/2 1-3/4" (44,5 v mm) Pendent Sprinkler 06662B 1-3/4" (44,5 mm) Pendent Sprinkler 06662B Installed with a Standard 1/8" (3,1 mm) Surface-Mounted Escutcheon 1-1/2" W I 2" (50,8 mm)(38,1 mm) Maximum Mini rum Pendent Sprinkler 06662B Installed with the Microfast® Model F-i Adjustable Escutcheon Figure 3: Sprinkler Dimensions with a Standard Escutcheon and the Model F-I Adjustable Escutcheon Ceiling Opening Size: 2-1/8" 2-5/16"(59 mm) Minimum, 2-1/8" (54 mm) 2-1/2"(64 mm) Maximum. (54 mm) 1-1/8" (28,6 mm) 1-~/4" Minimum (44,5 mm) Maximum Pendent Sprinkler 06662B Installed with the Micromatic® Model E-1 Recessed Escutcheon 1-1/8" (28,6 mm) (50,8 mm) Minimum Maximum Pendent Sprinkler 06662B Installed with the Micromatic® Model E-2 Recessed Escutcheon THIS PAGE INTENTIONALLY LEFT BLANK Replaces page 41 a-b, dated November 18, 2005 (Reformatted, added Form No. F_081296 135 °F temperature rating, and added CE approval for sprinkler 06666B.) March 9, 2007 Sprinkler 54a AGE® QUICK RESPONSE 'sI II(IFIG CONCEALED PENDENT SPRINKLER VK462 AND HP RINKLER VK463 (K5.6) The Viking Corporation, 210 N Industrial Park Road, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-945-4495 Email: techsvcs©vikingcorp.com DESCRIPTION Viking Mirage® Quick Response Concealed Pendent Sprinkler SIN VK462 and HP Sprinkler VK463 are thermosensitive glass-bulb spray sprinkler designed for installa- tion on concealed pipe systems where the appearance of a smooth ceiling is desired. The sprinkler is pre-assembled with a threaded adapter for installation with a low- profile cover assembly that provides up to W (12.7 mm) of vertical adjustment. The two-piece design allows installation and testing of the sprinkler prior to installation of the cover plate. The "push-on', "thread-off' design of the concealed cover plate assem- bly allows easy installation of the cover plate after the system has been tested and the ceiling finish has been applied. The cover assembly can be removed and reinstalled, allowing temporary removal of ceiling panels without taking the sprinkler system out of service or removing the sprinkler. LISTINGS AND APPROVALS cULus Listed: Category VNIV NYC Approved: MEA 89-92-E, Volume 32 Refer to the Approval Chart on page 54c and Design Criteria on page 54d for cULus Listing requirements that must be followed. TECHNICAL DATA Specifications: Minimum Operating Pressure: 7 psi (0.5 bar) Viking Technical Data may be found on Maximum Working Pressure: Sprinkler VK463 is rated for use with water The Viking Corporation's Web site at working pressures ranging from the minimum 7 psi (0.5 bar) up to http:/Iwww.vikinggroupinc.com. 250 psi (17.2 bar) for high-pressure systems. High-pressure (HP) The Web site may include a more recent sprinklers can be identified by locating "250" stamped on the deflec- edition of this Technical Data Page. tor. Sprinkler VK462 is rated to a maximum 175 psi (12 bar) wwp. Factory tested hydrostatically to 500 psi (34.5 bar) Testing: U.S.A. Patent No. 4,831,870 Thread size: 1/2" (15 mm) NPT Nominal K-Factor: 5.6 U.S. (80.6 metric*) "Metnc K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. Glass-bulb fluid temperature rated to -65 °F (-55 °C) Patents Pending Material Standards: Sprinkler Body: Brass UNS-C84400 Deflector: Phosphor Bronze UNS-051000 Deflector Pins: Stainless Steel UNS-S30300 Bulb: Glass, nominal 3 mm diameter Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-530400 Button: Brass UNS-C36000 Screws: 18-8 Stainless Steel Belleville Spring Sealing Assembly: Nickel Alloy, coated on both sides with Teflon Tape Yoke: Phosphor Bronze UNS-051000 Cover Adapter: Cold Rolled Steel UNS-G10080, Finish: Clear Chromate over Zinc Plating Cover Assembly Materials: Cover: Copper UNS-C 11000 Base: Brass UNS-C26000 or UNS-C26800 Springs: Nickel Alloy Solder: Eutectic Ordering Information: (Also refer to the current Viking price list.) Viking Mirage® Quick Response Concealed Pendent Sprinklers and Cover Plate Assemblies must be ordered separately: Form No. F_103005 Replaces page 54a-e, dated March 2, 2007 (added view showing sprinkler wrench flats and frame arms to Figure 1). Sprinkler 54b March 9, 2007 MIRAGE® QUICK RESPONSE CONCEALED PENDENT eJ I FJ I1G SPRINKLER VK462 AND HP SPRINKLER VK463 (K5.6) The Viking Corporation, 210 N Industrial Park Road, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-945-4495 Email: techsvcs©vikingcorp.com Sprinkler: Base Part No. 13503A or HP Base Part No. 13667A Specify sprinkler temperature rating by adding the appropriate suffix for the temperature rating to the base part number: Temperature Suffix (°F/"C): 155"/68° = B, 175"/79° = D, 200°/93" = E For example, sprinkler VK462 with a 155 °F/68 "C temperature rating = 13503AB. Cover Plate Assembly: Base Part No. 13504 (2-3/4" diameter) or Base Part No. 13642 (3-5/16" diameter) Specify finish and temperature rating of the cover plate assembly by first adding the appropriate suffix for the finish and then the appropriate suffix for the cover temperature rating to the base part number: Finish Suffix: Polished Chrome = F, Painted White = M-/SW1 004, Painted Ivory = M-ISW1634, Painted Black = M4SW1007 Temperature Suffix (°F/°C): 135"/57° = A, 165°/74° = C For example, cover 13504 with a Polished Chrome finish and a 165 "F/74 "C temperature rating = 13504F0. Available Finishes And Temperature Ratings: Refer to Table 1 Accessories: (Also refer to the "Sprinkler Accessories" section of the Viking data book.) Sprinkler Wrenches**: Heavy Duty Part No. 14047W/B (available since 2006), or Light Duty Part No. 14031*** (available since 2006) **Requires a 1/2 ratchet (not available from Viking). """Optional for removal of the protective cap. Ideal for sprinkler cabinets. Sprinkler Cabinet: Part No. 01731A, Capacity: five (5) sprinklers (available since 1971) INSTALLATION Refer to appropriate NFPA Installation Standards. OPERATION During fire conditions, when the temperature around the sprinkler approaches its operating temperature, the cover plate detaches. Continued heating of the exposed sprinkler causes the heat-sensitive liquid in the glass bulb to expand and the bulb to shatter, releasing the yoke, pip-cap and sealing spring assembly. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control the fire. INSPECTIONS, TESTS AND MAINTENANCE Refer to NFPA 25 for Inspection, Testing and Maintenance requirements. AVAILABILITY Viking Sprinklers SIN VK462 and VK463 are available through a network of domestic and international distributors. See The Viking Corporation web site for the closest distributor or contact The Viking Corporation. GUARANTEE For details of warranty, refer to Viking's current list price schedule or contact Viking directly. TABLE 1: AVAILABLE SPRINKLER TEMPERATURE RATINGS AND FINISHES Sprinkler Temperature Sprinkler Nominal Maximum Ambient I Temperature Rating of Cover Bulb Color Classification Temperature Rating Ceiling Temperature' Assembty (Reqiired) Ordinary 155 "F (68 "C) 100 "F (38 °C) 135°F (57 "C) Red Intermediate 175 "F (79 "C) 150 "F (65 "C) 165 "F (74 "C) Yellow Intermediate 200 "F (93 "C) 150 "F (65 "C) 165 "F (74 "C) . Green Cover Plate Finishes: Polished Chrome, Painted White, Painted Ivory, or Painted Black Footnotes 1 The sprinkler temperature rating is stamped on the sprinkler deflector. 2 Based on NFPA-13. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the Authority Having Jurisdiction. Refer to specific installation standards. prlrder Wrench (port Ma. 4D47Y/I Is shown) Step 2' Crefi4ly press The .rrnh upward and trr slightly to wnrs winglagrinant wtth the eprlrikL.r wrench 4l.*s. March 9, 2007 Sprinkler 54c MIRAGE® QUICK RESPONSE I FI N F1G lsl:IIE.,yM.. CONCEALED PENDENT SPRINKLER VK462 AND HP SPRINKLER VK463 (K5.6) The Viking Corporation, 210 N Industrial Park Road, Hastings MI 49058 Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-945-4495 Email: techsvcsvikingcorp.com Approval Chart 7 Mirage Quick Response Concealed Pendent .. Sprinklers VK462 and VK463 Sprinkler NPT Thread Nominal Maximum Overall Length Listings and Approvals4 Base Part SIN Size K-Factor Water Working (Sprinkler Body) (Refer also to Design Criteria on page 54d.) Number' Pressure Inch mm U.S. metric 2 Inches mm cULus8 FM NYC- VdS LPCB 13503A VK462 1/2' 15 5.6 80.6 175 psi (12 bar) 2-3/16" 56 AWl, BX1 -- AWl, BX1 -- -- 13667A VK463 1/2" 15 5.6 80.6 250 psi (17.2 bar)3 2-3/16" 56 AWl, BX1 -- AWl, BX1 -- -- Sprinkler Temperature Ratings Cover Plate Assembly Temp. Ratings" Finishes of the Cover Plate Assembly' A - 155 °F (68 °C) W - 135°F (57 °C) cover 135041 or 136421 (large diameter) 1 - Polished Chrome, Painted White, Painted B - 175°F (79°C) and 200 °F (93 °C) X - 165 "F (74 °C) cover 135041 or 136421 (large diameter) Ivory, or Painted Black Footnotes 1 Part number shown is the base part number. For complete part number, refer to current Viking price list schedule. 2 Metric K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0. 3The Water Working Pressure rating is stamped on the deflector. This chart shows the listings and approvals available at the time of printing. Other approvals may be in process. Check with the manufacturer for any additional approvals. Listed by Underwriter's Laboratories for use in the U.S. and Canada. 6 Accepted for use, City of New York Department of Buildings, MEA Number 89-92-E, Vol. 32. The 135 °F cover has an orange label. The 165 °F cover has a white label. 8 Painted finish consists of Polyester Baked Enamel. Other paint colors are available on request with the same listings as the standard paint colors. Listings and approvals apply for any paint manufacturer. Contact Viking for additional information. NOTE: Custom colors are indicated on a label inside the cover assembly. Refer to Figure 2. Sprinkler Frame2-114' C57.2 ,O i's Ares ar.t.r peri Is rqi.ilry In the CoRwha B0 NUT cv.rtlght.n. Use arty the designated spririder wrench, VI41rQ Part F'&rier 14D47V/9 or 14031. ED PT apply pore than E3 ft Ws. of tcrqi.ile A leek tight seat should be o,hlvv.d by b.irn?ng the sprInkler dothIs 1. to 1-112 turns beyond flig.r tlht SpAnkler and Adptr AsePty (Protective Cap Is riiovd for In aLt 'sr'i 14031..) .A 1/a' ratd Is reàed (n available from Step ii CarefiAty rilklu U's, wrench eldeecys w'cursd the deflector and pins Sprbder Vench Flat NEVER istofl the sprInkler by applying U's. IntatLutlurs wrench aa'czz the free arnm Figure 1: Sprinkler Installation and Correct Use of Wrenches Sprinkler 54d March 9, 2007 MIRAGE® QUICK RESPONSE CONCEALED PENDENT N11QW4 - I:II[.u.yM SPRINKLER VK462 AND HP SPRINKLER VK463 (K5.6) The Viking Corporation, 210 N Industrial Park Road, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-945-4495 Email: techsvcs©vikingcorp.com DESIGN CRITERIA (Also refer to the Approve! Chart on page 54 cULus Listing Requirements: MirageO Quick Response Concealed Pendent Sprinklers VK462 and VK463 are cULus Listed for installation in accordance with the latest edition of NFPA 13 for standard coverage pendent spray sprinklers as indicated below., For hazard occupancies up to and including Ordinary Hazard, Group II. Protection areas and maximum spacing shall be in accordance with the tables provided in NFPA 13. Maximum spacing allowed is 15 ft. (4.6 rn). Minimum spacing allowed is 6 ft. (1.8 m) unless baffles are installed in accordance with NFPA 13. Minimum distance from walls is 4 in. (102 mm). Maximum distance from walls shall be no more than one-half of the allowable distance between sprinklers. The distance shall be measured perpendicular to the wall. The sprinkler obstruction rules contained in NFPA 13 for standard coverage pendent spray sprinklers must be followed. NOTE: Concealed sprinklers must be installed in neutral or negative pressure plenums only. IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to page QRI-3 for general care, installation, and maintenance information. Viking sprinklers are to be installed in ac- cordance with. the latest edition of Viking technical data, the appropriate standards of NFPA, FM Global, LPCB, APSAD, VdS or other similar organizations, and also with the provisions of governmental codes, ordinances, and standards, whenever applicable. NIKIN FACTORY APPLIED CUSTOM PAINT COLOR Identification of Custom Paint Color: ll custom color painted cover plates will have on identifying label affixed to the inside of the cover that indicates custom color and will have o. representative sample (a paint dot) of the paint on the label. Figure 2: Identification of Custom Paint Color for Concealed Covers March 9, 2007 Sprinkler 54e GE® QUICK RESPONSE 'iI 11(1 FIGi11111IFSSPIRINKLER NCEALED PENDENT VK462 AND HP INKLER VK463 (K5.6) The Viking Corporation, 210 N Industrial Park Road, Hastings Ml 49058 Telephone: 269-945-9501 Technical Services 877-384-5464 Fax: 269-945-4495 Email: techsvcs@vikingcorp.com 1/2 (15 mm) \ -I- NPT £ I _ 2-3/4" 2-3/16" LLiL' 1 (70 mm) 2-1/4" (57.2 mm) (G mm) 6!- 1 - Maximum I Minimum a _-1 I ZL 2-3/4" (70 mm) or - al =~ 3—/16" (84.1 mm) Note' Upon sprinkler activation, the deflector descends to approxIteLy 13/16' (20.6 nn) I,eLow the sprinkler body. Figure 3: Sprinkler Dimensions and Cover installation THIS PAGE INTENTIONALLY LEFT BLANK Form No. F103005 Replaces page 54a-e, dated March 2, 2007 (added view showing sprinkler wrench flats and frame arms to Figure 1).