Loading...
HomeMy WebLinkAbout1890 RUTHERFORD RD; 100; AS120045; Permit10/21/21,9:41 AM AS120045 Permit Data City of Carlsbad Sprinkler Permit Permit No: AS120045 1890 RUTHERFORD Job Address: Status: PENDING RD Permit Type: SPRINK Applied 4/18/2012 Parcel No: 2121203500 Approved: Lot #: 0 Reference No.: Issued: PC #: Inspector: Project Title: GENOPTIX BIOPHARMA T.I.-STE. 100 Applicant: PACIFIC FIRE SYSTEMS, INC. 13142 NELSON LANE POWAY, CA 858-722-9865 Owner: PDG CARLSBAD 47&48 L P 1825 GILLESPIE WAY #102 EL CAJON CA LI Fees ($) Add'I Fees ($) Total ($) Balance($) 262 0 262 0 rA 1/1 MATERIAL DATA SUBMITTAL Genoptix, Inc. Biopharma Lab Tenant Improvement 1890 Rutherford Rd. Suite 100 Carlsbad, CA 92008 pCFI0 FIRE SYSTEMS, INC Pacific Fire Systems, Inc. 13142 Nelson Lane Poway, CA 92064 858-722-9865 Phone • 866-318-6930 Fax tqCD /Fire & Building / )Pro ducts Technical Services: Tel: (800) 32312 / Fax: (80071.5500 I Series EC- 11 EC-1g.'- 11,2 and 14,0 K-factor Extended Cogé (Light and Ordinary Hazard) Upright, Pen1ent, and Recessed Pendent Sprinklers General Description The Tyco® Series EC-li and EC-14 Extended Coverage Upright and Pen- dent Sprinklers are decorative glass bulb sprinklers designed for use in light or ordinary hazard occupancies. They are intended for use in automatic sprinkler systems designed in accord- ance with standard installation rules (e.g., NFPA 13) for a maximum cover- age area of 400 ft2 (37,2 m2), as com- pared to the maximum coverage area of 130 ft2 (12,1 m2) for standard cover- age sprinklers used in ordinary haz- ard occupancies or 225 ft2 (20,6 m2) for standard coverage sprinklers used in light hazard occupancies. The Series EC-11 and EC-14 Sprin- klers feature a UL and C-UL Listing that permits their use with unob- structed or non-combustible ob- structed ceiling construction as de- fined and permitted by NFPA 13, as well as a specific application listing for use under concrete tees. The Series EC-11 and EC-14 Ex- tended Coverage Sprinklers have been fire tested to compare their per- formance to that of standard coverage spray sprinklers. These tests have shown that the protection provided is equal to or more effective than stand- ard coverage spray sprinklers. IMPORTANT Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and in- stallation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. Pagel of 8 Corrosion resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be ob- tained when exposed to corrosive at- mospheres. Although corrosion resis- tant coated sprinklers have passed the standard corrosion tests of the appli- cable approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suitability of these corrosion resistant coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity, should be con- sidered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. WARNINGS The Series EC-11 and EC-14 Ex- tended Coverage Sprinklers described herein must be installed and main- tained in compliance with this docu- ment, as well as with the applicable standards of the National Fire Protec- tion Association, in addition to the standards of any other authorities hav- ing jurisdiction. Failure to do so may impair the performance of these de- vices. The owner is responsible for main fain- ing their fire protection system and de- vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. DECEMBER, 2007 Model/Sprinkler Identification Number TY5137 - Upright, 11.21K TY5237 - Pendent, 11.2K TY6137 - Upright, 14.01K TY6237 - Pendent,14.01K 1Y5137 is a redesignation for C5137, G1894, and S2510. TY5237 is a redesignation for C5237, G1893, and S2511. TY6137 is a redesignation for C6137, G1896, and S2610. TY6237 is a redesignation for C6237, G1895, and S2611. TFP22O TFP22O ESCUTCHEON PLATE SEATING SURFACE iiiiiir- -I !,Al l1-11/16 111-=-. WRENCH 3/4" ** FLAT NPT CROSS PENDENT SECTION 2-7/16" (61,9 mm) UPRIGHT & PENDENT I- 1/2"(12,7 mm) J NOMINAL MAKE-IN UPRIGHT Page 2 of 8 1 - Frame 2 - Button 3 - Sealing Assembly 4-Bulb 5 - Compression Screw 6 - Deflector* * Temperature rating is indicated on deflector Pipe thread connections per ISO 7/1 can be provided on special request. FIGURE 1 SERIES EC-11 AND EC-14 EXTENDED COVERAGE SPRINKLERS 11.2 K-FACTOR (TY5137) UPRIGHT AND (TY5237) PENDENT 14.0 K-FACTOR (TY6137) UPRIGHT AND (TY6237) PENDENT SPRINKLER FINISH (See Note 5) HAZARD TYPE TEMP. BULB LIQUID NATURAL BRASS I CHROME PLATED I WHITE* IPOLYEST ER I LEAD COATED LIGHT Refer to Table B for UL and C-UL Sensitivity Rating and Refer to Table C for FM Sensitivity Rating UPRIGHT K=11.2 (TY5137) PENDENT K=11.2 (TY5237) K14.0 (TY6237) 135"F/57°C Orange 1, 2, 3**, 4 155°F/68°C Red 175"F/79°C Yellow 1,2,4 1,2,4 200°F/93°C Green 286"F/141°C Blue REC. PENDENT K=1 1.2 (TY5237) K=14.0 (1Y6237) With Style 30 Escutcheon 135°F/57°C Orange 1, 2, 3, 4 1, 2, 4 N/A 155°F/68°C Red 175°F/79°C Yellow 200°F/93°C Green 286"F/141°C Blue ORDINARY Refer to Table B for UL and C-UL Sensitivity Rating and Refer to Table C for FM Sensitivity Rating UPRIGHT K=11.2 (TY5137) K=14.0 (TY6137) and PENDENT K11.2 (TY5237) K=14.0 (TY6237) 135"F157"C Orange 1,2, 3,4 1,2,3,4 155°F/68"C Red 175°F/79"C Yellow 1, 2, 4 200"F/93"C Green 286°F/141"C Blue REC. PENDENT K=1 1.2 (TY5237) K=14.0 (TY6237) With Style 40 Escutcheon 135°F/57"C Orange 1,2,4 N/A 155°F/68"C Red 175°F/79"C Yellow 200°F/93°C Green NOTES: 1 Listed by Underwriters Laboratories, Inc. (UL). 2.1-isted by Underwriters Laboratories, Inc. for use in Canada (C-UL). Approved by Factory Mutual Research Corporation (FM). Approved by the City of New York under MEA 177-03-E. Where Polyester Coated or Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. "Frame and Deflector only. Listings and approvals apply to color (Special Order). ** Pendent Only. N/A: Not Available TABLE A, LABORATORY LISTINGS AND APPROVALS U TFP22O Page 3 of 8 LIGHT HAZARD 135°F 155°F 175°F 200°F 286°F ORDINARY HAZARD 135°F 155°F 175°F 200°F 286°F AREA STYLE 14x14 Up. orPend. - - - - - OR OR OR OR 14 x 14 Style 30 Recessed - - - - - OR OR OR OR 14 x 14 Style 40 Recessed - - - - - OR OR OR OR 16x16 Up. orPend. OR* OR* OR OR* OR* SR SR SR SR 16 x 16 Style 30 Recessed QR* OR* OR* OR* OR* SR SR SR SR 16 x 16 Style 40 Recessed N/A N/A N/A N/A N/A SR SR SR SR 18 x 18 Up. or Pend. OR* OR OR* OR* OR* SR SR SR SR 18 x 18 Style 30 Recessed OR* OR* OR* OR* OR* SR SR SR SR 18 x 18 Style 40 Recessed N/A N/A N/A N/A N/A SR SR SR SR 20 x 20 Up. or Pend. OR* OR* OR* SR* SR* SR SR SR SR 20 x 20 Style 30 Recessed QR* SR* OR* SR* SR* SR SR SR SR 20 x 20 Style 40 Recessed N/A N/A N/A N/A N/A SR SR SR SR OR: Quick Response SR: Standard Response N/A: Not Applicable * Does not apply to Upright K = 14.0 TABLEB SENSITIVITY RATING FOR UL AND C-UL LISTING OF SERIES EC-11 OR EC-14 SPRINKLERS (SEE TABLE D FOR PERMITTED K-FACTOR/AREA COMBINATIONS) LIGHT HAZARD ORDINARY HAZARD 135°F 155°F 175°F 200°F 286°F 135°F 155°F 175°F 200°F 286°F AREA STYLE 14x14 Up. orPend. - - - - - SR SR SR SR SR 14 x 14 Style 30 Recessed - - - - - N/A N/A N/A N/A N/A 14x14 Style 40 Recessed - - - - - N/A N/A N/A N/A N/A 16 x 16 Up. or Pend. OR* OR* N/A N/A N/A SR SR SR SR SR 16 x 16 Style 30 Recessed OR OR N/A N/A N/A N/A N/A N/A N/A N/A 16 x 16 Style 40 Recessed N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 18 x 18 Up. or Pend. OR* QR* N/A N/A N/A SR SR SR SR SR 18 x 18 Style 30 Recessed OR OR N/A N/A N/A N/A N/A N/A N/A N/A 18 x 18 Style 40 Recessed N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 20 x 20 Up. or Pend. QR* QR* N/A N/A N/A SR SR SR SR SR 20 x 20 Style 30 Recessed OR OR N/A N/A N/A N/A N/A N/A N/A N/A 20 x 20 Style 40 Recessed N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A OR: Quick Response SR: Standard Response N/A: Not Applicable * Pendent Only TABLE SENSITIVITY RATING FOR FM APPROVAL OF SERIES EC-11 OR EC-I4 SPRINKLERS (SEE FM LOSS PREVENTION DATA SHEET 2-8N FOR PERMITTED K-FACTORJAREA COMBINATIONS) SR N/A N/A SR N/A N/A SR N/A N/A SR N/A N/A Page 4 of 8 TFP22O Discharge Coefficients K = 11.2 GPM/p5i112 2 (161,3 LPM/bar112) K = 14.0 GPM/p5i1/2 (201,6 LPM/barl'2) Technical Data Approvals The Series EC-11 and EC-14 Ex- tended Coverage Upright, Pendent, and Recessed Pendent Sprinklers are UL and C-UL Listed. (Refer to Table A for complete sprinkler approval infor- mation including corrosion resistant status. The approvals apply to the service conditions indicated in the De- sign Criteria section.) The Series EC-11 and EC-14 Ex- tended Coverage Upright and Pendent Sprinklers are FM Approved. (Refer to Table A for complete sprinkler ap- proval information including corrosion resistant status. The approvals apply to the service conditions indicated in the Design Criteria section.) The Style 60 Two-Piece Flush Es- cutcheon (Ref. Figure 4) is UL Listed and FM Approved for use with the Se- ries EC-1 1 and EC-14 Pendent Sprin- klers. Maximum Working Pressure 175 psi (12,1 bar) Pipe Thread Connection 3/4 inch NPT Temperature Ratings 135°F/57°C to 286°F/141°C Finish Sprinkler: Refer to Table A Recessed or Flush Escutcheon: White Coated, Chrome Plated, and Brass Plated Physical Characteristics Frame .............Bronze Button .............Bronze Sealing Assembly .......... Beryllium Nickel w/Teflon t Bulb ........Glass (3 mm dia.) Compression Screw ......... .......Bronze Deflector ............Brass Patents U.S.A. Patent Numbers 5,366,022; 5,579,846; 5,584,344; 5,609,211; 5,862,994; and 5,865,256. Operation The glass bulb contains a fluid which expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass bulb, which then allows the sprinkler to activate and flow water. Design Criteria The Tyco® Series EC-11 and EC-14 Extended Coverage Sprinklers must only be installed in accordance with the applicable UL and C-UL Listing or FM Approval requirements as indi- cated below. Only the Style 30 or 40 Recessed Escutcheon is to be used for recessed installation, as applicable (Ref. Table A, B, and C). UL and C-UL Listing Requirements 1. The Series EC-1 1 and EC-1 4 Sprin- klers may be used for the coverage areas shown in Table D, based on maintaining the minimum specified flow rate as a function of coverage area and hazard group for all of the sprinklers in the design area. The Series EC-1 1 and EC-14 Sprin- klers are permitted to be used with unobstructed or non-combustible obstructed ceiling construction as defined and permitted by NFPA 13. For example: Unobstructed, combustible or non- combustible, ceiling construction with a deflector to ceiling/roof deck distance of 1 t 12 inches (25 to 300 mm). Obstructed, non-combustible, ceil- ing construction with a deflector lo- cation below structural members of 1 t 6 inches (25 to 150 mm) and a maximum deflector to ceiling/roof deck distance of 22 inches (550 mm). The Series EC-1 1 and EC-14 Sprin- klers having been specifically tested and listed for non-combustible ob- structed construction are permitted to be used within trusses or bar joists having non-combustible web mem- bers greater than 1 inch (25.4 mm) when applying the 4 times obstruc- tion criteria rule defined under 'Ob- structions to Sprinkler Discharge Pattern Development". 4. The minimum allowable spacing be- tween the Series EC-il and EC-14 Sprinklers, to prevent cold solder- ing, is 8 feet (2,4 m) for upright sprin- klers and 9 feet (2,7 m) for pendent sprinklers. 5. The Series EC-1 1 and EC-14 Sprin- klers are to be installed in accord- ance with all other requirements of NFPA 13 for extended coverage up- right and pendent sprinklers. For ex- ample: obstructions to sprinkler dis- charge, obstructions to sprinkler pattern development, obstructions to prevent sprinkler discharge from reaching hazard, clearance to stor- age, etc. UL and C-UL Specific Application Listing Requirements For Installation Under Concrete Tees The Series EC-11 and EC-14 Ex- tended Coverage Upright and Pendent Sprinklers (1Y5137, 1Y5237, 1Y6137 & 1Y6237) have a UL and C-UL Spe- cific Application Listing for use under concrete tees when installed as fol- lows: The stems of the concrete tee con- struction must spaced at less than 7.5 feet (2,3 m) on center but more than 3 feet (0,9 m) on center. The depth of the concrete tees must not exceed 30 inches (762 mm). The maximum permitted concrete tee length is 32 feet (9,8 m); however, where the concrete tee length ex- ceeds 32 feet (9,8 m), non-combus- tible baffles, equal in height to the depth of the tees, can be installed so that the space between the tees does not exceed 32 feet (9,8 m) in length. 2. The sprinkler deflectors are to be located in a horizontal plane at or above 1 inch (25,4 mm) below the bottom of the concrete tee stems. When the sprinkler deflectors are located higher than a horizontal plane 1 inch (251,4 mm) beneath the bottom of the concrete tee stems, the obstruction to sprinkler dis- charge criteria requirements of NFPA 13for extended coverage up- right sprinklers applies. FM Approval Requirements The Series EC-11 and EC-14 Ex- tended Coverage Sprinklers are to be installed in accordance with the appli- cable Factory Mutual Loss Prevention Data Sheet for limited use in buildings of specific roof construction and for the protection of certain specific ordinary hazard (non-storage and/or non-flam- mable or combustible liquid) occupan- cies. Information provided in the FM TFP22O Page 5 of 8 - 2-7/8" DIA. 1/2±1/8 (73,0 mm) 1/2" (12,7 mm) [ (12,7±3,2 mm) 2-1/4" DIA. 1/4" (6,4 mm FACE OF (57,2 mm) SPRINKLER FITTING (3,2 mm) MOUNTING SURFACE MOUNTING PLATE CLOSURE (34,9 mm) 1-1/8" (28,6 mm) FIGURE 2 SERIES EC-1 I AND EC-14 RECESSED PENDENT SPRINKLER ASSEMBLY WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 30 RECESSED ESCUTCHEON 2-7/8' DIA. 5/8±1/4" (73,0 mm) 3/4(19,1 mm) r (15,9±6,4 mm) 2-1/4" DIA. 1/4" (6,4 mm) I FACE OF (57,2 mm) I I SPRINKLER 1/8" FITTING (3,2 mm) I _ (UJ I I I \ MOUNTING / MOUNTING SURFACE PLATE CLOSURE 1-3/8" (34,9 mm) 7/8 (22,2 mm) FIGURE 3 SERIES EC-Il AND EC-14 RECESSED PENDENT SPRINKLER ASSEMBLY WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 40 RECESSED ESCUTCHEON Loss Prevention Data Sheets relate to, but are not limited to, hydraulic design, ceiling slope and obstructions, mini- mum and maximum allowable spac- ing, and deflector-to ceiling distance. These criteria may differ from UL and/or NFPA criteria, therefore the de- signer should review and become fa- miliar with Factory Mutual require- ments before proceeding with design. Installation The Series EC-il and EC-14 Sprin- klers must be installed in accordance with the following instructions: NOTES Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprinkler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 inch (1,6 mm) for the 135°F/57°C to 3/32 inch (2,4 mm) for the 286°F/141°C temperature ratings. A 3/4 inch NPT sprinkler joint should be obtained with a minimum to maxi- mum torque of 10 to 20 ft.lbs. (13,4 to 26,8 Nm). Higher levels of torque may distort the sprinkler inlet with conse- quent leakage or impairment of the sprinkler. Do not attempt to compensate for in- sufficient adjustment in an Escutcheon Plate by under- or over-tightening the Sprinkler. Readjust the position of the sprinkler fitting to suit. Step 1. The sprinkler must be installed with the deflector parallel to the mount- ing surface. Pendent sprinklers must be installed in the pendent position, and upright sprinklers must be in- stalled in the upright position. Step 2. After installing the Style 30,40, or 60 mounting plate (or other escutch- eon, as applicable) over the sprinkler pipe threads and with pipe thread sealant applied to the pipe threads, hand tighten the sprinkler into the sprinkler fitting. Step 3. Wrench tighten upright or pen- dent sprinklers using only the W-Type 3 (End A) Sprinkler Wrench. When in- stalling the pendent sprinkler with Style 30, 40, or 60 Escutcheon, wrench tighten the sprinkler using only the W-Type 22 Sprinkler Wrench. The wrench recess of the applicable sprin- kler wrench (Ref. Figure 5 and 6) is to be applied to the sprinkler wrench flats (Ref. Figure 1). Page 6 of 8 TFP220 2-7/8" DIA. (73,0 mm) 2-1/4" DIA. INTERNAL - (57,2 mm) DIMENSIONS OF I I STYLE 60 ESCUTCHEON I I ACCOMMODATE CLASS 150 MALLEABLE OF IRON REDUCING SPRINKLER FITTING 3/8" (9,5 mm) ABOVE TO 1/8" (3,2 mm) BELOW MOUNTING MOUNTING SURFACE ESCUTCHEON PLATE FACE /8" SURFACE SPRINKLER FITTING: 0314"NPT SEATING SURFACE:RE 1/4" (6,4 mm) ABOVE TO 1/2" (12,7 mm) BELOW 2-5/16" (58,7 mm) MOUNTING SURFACE;ING 3/4(19,1 mm) TOTAL PLATE ADJUSTMENT FIGURE 4 SERIES EC-Il AND EC-14 PENDENT SPRINKLER ASSEMBLY WITH 3/4 INCH TOTAL ADJUSTMENT STYLE 60 TWO-PIECE FLUSH ESCUTCHEON Care and Maintenance The Tyco® Series EC-li and EC-14 Sprinklers must be maintained and serviced in accordance with the follow- ing instructions: NOTE Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection systems must be obtained from the proper authori- ties and all personnel who may be affected by this action must be notified. Sprinklers that are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or otherwise altered after leaving the factory. Modi- fied sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid dam- age to the sprinklers - before, during, and after installation. Sprinklers dam- aged by dropping, striking, wrench twist/slippage, or the like, must be re- placed. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. (Ref. Installation Section). Frequent visual inspections are rec- ommended to be initially performed for corrosion resistant coated sprinklers, after the installation has been com- pleted, to verify the integrity of the cor- rosion resistant coating. Thereafter, annual inspections per NFPA 25 should suffice; however, instead of in- specting from the floor level, a random sampling of close-up visual inspec- tions should be made, so as to better determine the exact sprinkler condi- tion and the long term integrity of the corrosion resistant coating, as it may be affected by the corrosive conditions present. The owner is responsible for the in- spection, testing, and maintenance of their fire protection system and de- vices in compliance with this docu- ment, as well as with the applicable standards of the National Fire Protec- tion Association (e.g., NFPA 25), in addition to the standards of any other authorities having jurisdiction. The in- stalling contractor or sprinkler manu- facturer should be contacted relative to any questions. Automatic sprinkler systems should be inspected, tested, and maintained by a qualified Inspection Service in accord- "FITTING SIDE" TOWARDS SPRINKLER FITTING / WRENCH ( RECESS END') FIGURE 5 W-TYPE 3 SPRINKLER WRENCH WRENCH RECESS - 1 \ LiAl WRENCH HEX FIGURE 6 W-TYPE 22 RECESSED SPRINKLER WRENCH ance with local requirements and/or national codes. TFP22O Page 7 of 8 GROUP I GROUP II LIGHT HAZARD ORDINARY HAZARD ORDINARY HAZARD 0.10 GPM/FT2 0.15 GPM/FT2 0.20 GPM/FT2 DESCRIPTION AREA S GPM PSI GPM PSI GPM PSI TY5137 (K11.2) UPRIGHT 14 x 14 - - 30 7.2 39 12.1 16x16 30 7.2 39 12.1 51 20.7 18 x 18 33 8.7 49 19.1 65 33.7 20 x 20 40 12.8 60 28.7 80 51.0 TY5237 (K=11.2) PENDENT 14 x 14 - - 30 7.2 39 12.1 16x16 30 7.2 39 12.1 51 20.7 18x18 33 8.7 49 19.1 65 33.7 20 x 20 40 12.8 60 28.7 80 51.0 TY6137 (K=14.0) UPRIGHT 14 x 14 N/A N/A - - - - 16x16 N/A N/A 39 7.8 51 13.3 18x18 N/A N/A 49 12.3 65 21.6 20 x 20 N/A N/A 60 18.4 80 32.7 TY6237 (K=14.0) PENDENT 14 x 14 - - - - - - 16 x 16 37 7.0 39 7.8 51 13.3 18x18 37 7.0 49 12.3 65 21.6 20 x 20 40 8.2 60 18.4 80 32.7 1 ft. = 0.3048 m 1 ft2 = 0.093 m2 1 gpm = 3.785 1pm 1 psi = 0.06895 bar 1 gpm/ft2 = 40.74 mm/mm TABLED FLOW CRITERIA FOR UL AND C-UL LISTING OF SERIES EC-il AND EC-14 SPRINKLERS Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war- ranted solely to the original Buyer for ten (10) years against defects in mate- rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warranty is given for products or com- ponents manufactured by companies not affiliated by ownership with TFBP or for products and components which have been subject to misuse, improper installation, corrosion, or which have not been installed, maintained, modi- fied or repaired in accordance with ap- plicable Standards of the National Fire Protection Association, and/or the standards of any other Authorities Having Jurisdiction. Materials found by TFBP to be defective shall be either repaired or replaced, at TFBP's sole option. TFBP neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of prod- ucts. TFBP shall not be responsible for sprinkler system design errors or inac- curate or incomplete information sup- plied by Buyer or Buyer's repre- sentatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential dam- ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP's liability exceed an amount equal to the sales price. The foreooirwarrantv is made in lieu This limited warranty sets forth the ex- clusive remedy for claims based on failure of or defect in products, materi- als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex- tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Page 8 of 8 Ordering Procedure When placing an order, indicate the full product name. Please specify the Sprinkler Identification Number (SIN), quantity, and temperature rating. Re- fer to the Price List for complete listing of Part Numbers. Contact your local distributor for avail- ability. Sprinkler Assemblies with NPT Thread Connections: Specify: (specify SIN), (specify K-Fac- tor), (specify temperature rating), (specify Pendent or Upright) Extended Coverage Sprinkler with (specify fin- ish), P/N (specify - from Table E, where applicable). Recessed Escutcheon, Two-Piece: Specify: Style (30 or 40) Two-Piece Recessed Escutcheon with (specify material or finish*), P/N (specify). *Refer to Technical Data Sheet TFP77O. Flush Escutcheon, Two-Piece: Specify: Style 60 Two-Piece Flush Es- cutcheon with (specify finish*), P/N (specify). *Refer to Technical Data Sheet TFP778. Sprinkler Wrench: Specify: W-Type 3 Sprinkler Wrench, P/N 56-895-1-001 Specify: W-Type 22 Recessed Sprin- kler Wrench, P/N 56-665-7-001 TFP22O P/N 51 - AAA - B -CCC AAA = 893 (for TY5237 Ki 1.2 Pendent) AAA = 894 (for 1Y5137 Ki 1.2 Upright) AAA = 895 (for TY6237 K14.0 Pendent) AAA = 896 (for 1Y6137 K14.0 Upright) B = 1 (for Natural Brass) B = 3 (for White [RAL9010])* B = 4 (for White Polyester) B = 7 (for Lead Coated B = 9 (for Chrome Plated) CCC = 135 (for 135°F/57°C) CCC = 155 (for 155°F/68°C) CCC = 175 (for 175°F/79°C) CCC = 200 (for 200F/93C) *Eastern Hemisphere sales only. TABLE PART NUMBERS FOR EC-11 AND EC-14 SPRINKLERS © 2007 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 tqCC IF/re & Building I Products Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 Series EC-8 - 8.0 K-factor Extended Coverage (Light Hazard) Pendent and Recessed Pendent Sprinklers General Description The Series EC-8 Extended Coverage Pendent Sprinklers are decorative glass bulb sprinklers designed for use in light hazard occupancies. They are intended for use in automatic sprinkler systems designed in accordance with standard installation rules (e.g., NFPA 13) for a maximum coverage area of 400 ft2 (37,2 m2), as compared to the maximum coverage area of 225 ft2 (20,6 m2) for standard coverage sprin- klers used in light hazard occupancies. The recessed version of the EC-8, in- tended for use in areas with a finished ceiling, uses either the two-piece Style 30 or 40 Recessed Escutcheon. The Style 30 Recessed Escutcheon pro- vides up to 1/2 inch (12,7 mm) of total adjustment from the flush pendent po- sition, whereas, the Style 40 provides 3/4 inch (19,1 mm) of vertical adjust- ment from the flush pendent position. The adjustment provided by the Re- cessed Escutcheons reduces the ac- curacy to which the fixed pipe drops to the sprinklers must be cut. Corrosion resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be ob- tained when exposed to corrosive at- mospheres. Although corrosion resis- IMPORTANT Always refer to Technical Data Sheet TFP700 for the 'INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and in- stallation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fall to operate in a fire situation or cause it to operate prematurely. Page 1 of 6 tant coated sprinklers have passed the standard corrosion tests of the appli- cable approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suitability of these corrosion resistant coatings for any given corrosive environment. The effects of ambient temperature, concentration of chemicals, and gas/chemical velocity, should be con- sidered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. WARNINGS The Series EC-8 Extended Coverage Sprinklers described herein must be installed and maintained in compli- ance with this document, as well as with the applicable standards of the National Fire Protection Association, in addition to the standards of any other authorities having jurisdiction. Failure to do so may impair the per- formance of these devices. The owner is responsible for maintain- ing their fire protection system and de- vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Model/Sprinkler Identification Number 1Y4232 - Pendent, 8.0K TY4232 is a redesignation for C4232. MARCH, 2007 Technical Data Approvals UL and C-UL Listed. FM and NYC Ap- proved. (Refer to Table A for complete approval information including corro- sion resistant status. The approvals apply to the service conditions indi- cated in the Design Criteria section.) Maximum Working Pressure 175 psi (12,1 bar) Pipe Thread Connection 314 inch NPT Discharge Coefficients K = 8.0 GPM/psi112 (115,2 LPM/barll2) TFP223 Page 2 of 6 TFP223 Components: 3/4" ** ESCUTCHEON PLATE 1 - Frame NPT SEATING SURFACE Button Sealing Assembly1 Bulb Compression -2)/8'. 1/2"6 - Screw 3 mm) Deflector* Temperere rating is NOMINAL 1-7/16" J(12,7 mm) (54,0 Indicated on Deflector.MAKE-IN (36,5mm) ** Pipe thread connections per ISO 6* 7/1 can be provided on special request. FIGURE 1 SERIES EC4 (TY4232) EXTENDED COVERAGE PENDENT SPRINKLERS SPRINKLER FINISH (See Note 4) HAZARD TYPE TEMP. BULB NATURAL CHROME WHITES LIQUID BRASS PLATED 1POLYESTER LIGHT PENDENT 135°F/57°C Orange Refer to Table B for UL and C-UL _______________ 1,2,3,5 1 55°F/66°C Red REC. PENDENT 135"F/57°C Orange Sensitivity Rating and wI Style 3OEsc. 1,2,3,5 Refer to Table C for FM 155°F/68"C Red REC. PENDENT 135°F/57"C Orange Sensitivity Rating wI Style 4OEsc. 1,2,5 155"F/68°C Red NOTES: Listed by Underwriters Laboratories, Inc. (UL). Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL). Approved by Factory Mutual Research Corporation (FM). Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. Approved by the City of New York under MEA 11 3-04-E. *Frame and Deflector only. Listings and approvals apply to color (Special Order). TABLE A LABORATORY LISTINGS AND APPROVALS (Refer to the Design Criteria Section) Temperature Ratings 135°F/570C and 155°F168°C Finish Sprinkler: Refer to Table A Recessed Escutcheon: White Coated, Chrome Plated, and Brass Plated Physical Characteristics Frame .............Bronze Button .............Bronze Sealing Assembly .......... Beryllium Nickel w/Teflont Bulb ........Glass (3 mm dia.) Compression Screw ......... ......Bronze Deflector ............Brass t Registered trademark of DuPont Operation The glass bulb contains a fluid that expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass bulb, allowing the sprinkler to activate and flow water. Design Criteria The Series EC-8 Extended Coverage Pendent Sprinklers must only be in- stalled in accordance with the applica- ble UL and C-UL Listing or FM Ap- proval requirements as indicated below. Only the Style 30 or 40 Re- cessed Escutcheon is to be used for recessed installation, as applicable (Ref. Table A, B, and C).. UL and C-UL Listing Requirements The Series EC-8 Sprinklers may be used for the coverage areas shown in Table D, based on maintaining the minimum specified flow rate as a function of coverage area and haz- ard group for all of the sprinklers in the design area. With respect to heat sensitivity, the Series EC-8 Sprinklers can be used with unobstructed construction con- sisting of flat, smooth ceilings (in- cluding bar joists) with a maximum pitch of one in six as defined and permitted by NFPA 13. The minimum allowable spacing be. TFP223 135°F 155°F AREA STYLE 16x16 Pendent OR OR 16 x 16 Style 30 Recessed OR OR 16 x 16 Style 40 Recessed OR OR 18x18 Pendent OR OR 18 x 18 Style 30 Recessed OR SR 18 x 18 Style 40 Recessed OR SR 20 x 20 Pendent OR SR 20 x 20 Style 30 Recessed OR SR 20 x 20 Style 40 Recessed SR SR OR Quick Response SR: Standard Response N/A: Not Applicable TABLE B SENSITIVITY RATING FOR UL AND C-UL LISTING OF SERIES EC-8 SPRINKLERS 135°F 155°F AREA STYLE 16x16 Pendent OR OR 16 x 16 Style 30 Recessed OR N/A 16x 16 Style 40 Recessed N/A N/A 18x18 Pendent OR OR 18 x 18 Style 30 Recessed OR N/A 18 x 18 Style 30 Recessed N/A N/A 20 x 20 Pendent OR OR 20 x 20 Style 30 Recessed OR N/A 20 x 20 Style 40 Recessed N/A N/A OR: Quick Response SR: Standard Response N/A: Not Applicable TABLE C SENSITIVITY RATING FOR FM APPROVAL OF SERIES EC-8 SPRINKLERS Page 3 of 6 Installation The Series EC-8 Sprinklers must be installed in accordance with the follow- ing instructions: NOTES Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprinkler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 inch (1,6 mm). A leak tight 3/4 inch NPTsprink!erjoint should be obtained with a torque of 10 to 20 ft.lbs. (13,4 to 26,8 Nm). A maxi- mum of 30 ft.lbs. (40,7 Nm) of torque is to be used to install sprinklers. Higher levels of torque may distort the sprinkler inlet with consequent leak- age or impairment of the sprinkler. Do not attempt to compensate for in- sufficient adjustment of an Escutcheon Plate by under- or over-tightening the Sprinkler. Readjust the position of the sprinkler fitting to suit. Step 1. The sprinkler must be installed with the deflector parallel to the mount- ing surface. Pendent sprinklers must be installed in the pendent position. Step 2. After installing the Style 30 or 40 mounting plate (or other escutch- eon, as applicable) over the sprinkler pipe threads, and with pipe thread sealant applied to the pipe threads, hand tighten the sprinkler into the sprinkler fitting. Step 3. Wrench tighten pendent sprin- klers using only the W-Type 3 (End A) Sprinkler Wrench. Wrench tighten the recessed pendent sprinklers using only the W-Type 23 Sprinkler Wrench. The wrench recess of the applicable sprinkler wrench (Ref. Figure 4 and 5) is to be applied to the sprinkler wrench flats (Ref. Figure 1). tween the Series EC-8 Sprinklers, to prevent cold soldering, is 8 feet (2,4 m). 4. The Series EC-8 Sprinklers are to be installed in accordance with all other requirements of NFPA 13 for ex- tended coverage pendent sprin- klers. FM Approval Requirements The Series EC-8 Extended Coverage Sprinklers are to be installed in accord- ance with the applicable Factory Mu- tual Loss Prevention Data Sheet. Infor- mation provided in the FM Loss Prevention Data Sheets relate to, but are not limited to, hydraulic design, ceiling slope and obstructions, mini- mum and maximum allowable spac- ing, and deflector-to ceiling distance. Page 4 of 6 TFP223 DESCRIPTION AREA GPM PSI TY4232 (K=8.0) PENDENT 16 x 16 26 10,6 18x18 33 17.0 20x20 40 25.0 1 ft. = 0.3048 m 1 ft2 = 0.093 m2 1 gpm = 3.785 1pm 1 psi = 0.06895 bar 1 gprnlft2 = 40.74 mm/mm TABLED FLOW CRITERIA FOR UL AND C-UL LISTING OF SERIES EC-8 SPRINKLERS - 2-7/8" DIA. 1/2±1/8" (73,0 mm) 1/2"(12,7 mm) 1' (12,7±3,2 mm) - 2-1/4" DIA. 1/4" (6,4 mm) I FACE OF (57,2 mm) SPRINKLER 1/8" FITTING (3,2 mm) I ç MOUNTING/ MOUNTING SURFACE PLATE CLOSURE 1-1/4"(31,8 mm) 1"(25,4 mm) FIGURE 2 SERIES EC-8 RECESSED PENDENT SPRINKLER ASSEMBLY WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 30 RECESSED ESCUTCHEON - 27/8" DIA. 9/16±1/4" (73,0 mm) 3/4" (19,1 mm) r (14,3±6,4 mm) 2-1/4" 01k 1/4" (6,4 mm) I FACE OF (57,2 mm) 1/8" SPRINKLER I FITTING ________ I (3,2 mm) / MOUNTING SURFACE /7 OUNTING PLATE / CLOSURE 1-5/16"(33,3 mm) 13/16'(20,6 mm) FIGURE 3 SERIES EC-8 RECESSED PENDENT SPRINKLER ASSEMBLY WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 40 RECESSED ESCUTCHEON "FITTING SIDE" TOWARDS SPRINKLER FITTING WRENCH RECESS (END "A") FIGURE 4 W-TYPE 3 SPRINKLER WRENCH WRENCH RECESS Lu FIGURE 5 W-TYPE 23 RECESSED SPRINKLER WRENCH Care and Maintenance The Series EC-8 Sprinklers must be maintained and serviced in accord- ance with the following instructions: NOTE Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection systems must be obtained from the proper authorities and all personnel who may be affected by this action must be no- tified. Sprinklers that are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or otherwise altered after leaving the factory. Modi- fied sprinklers must be replaced. Sprinklers that have been exposed to TFP223 Page 5 of 6 corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid dam- age to the sprinklers - before, during, and after installation. Sprinklers dam- aged by dropping, striking, wrench twist/slippage, or the like, must be re- placed. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. (Ref. Installation Section). Frequent visual inspections are rec- ommended to be initially performed for corrosion resistant coated sprinklers, after the installation has been com- pleted, to verify the integrity of the cor- rosion resistant coating. Thereafter, annual inspections per NFPA 25 should suffice; however, instead of in- specting from the floor level, a random sampling of close-up visual inspec- tions should be made, so as to better determine the exact sprinkler condi- tion and the long term integrity of the corrosion resistant coating, as it may be affected by the corrosive conditions present. The owner is responsible for the in- spection, testing, and maintenance of their fire protection system and de- vices in compliance with this docu- ment, as well as with the applicable standards of the National Fire Protec- tion Association (e.g., NFPA 25), in addition to the standards of any other authorities having jurisdiction. The in- stalling contractor or sprinkler manu- facturer should be contacted relative to any questions. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service in accordance with local requirements and/or national codes. Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war- ranted solely to the original Buyer for ten (10) years against defects in mate- rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warranty is given for products or com- ponents manufactured by companies not affiliated by ownership with TFBP or for products and components which have been subject to misuse, improper installation, corrosion, or which have not been installed, maintained, modi- fied or repaired in accordance with ap- plicable Standards of the National Fire Protection Association, and/or the standards of any other Authorities Having Jurisdiction. Materials found by TFBP to be defective shall be either repaired or replaced, at TFBP's sole option. TFBP neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of prod- ucts. TFBP shall not be responsible for sprinkler system design errors or inac- curate or incomplete information sup- plied by Buyer or Buyer's repre- sentatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential dam- ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP's liability exceed an amount equal to the sales price. The foregoing warranty is made in lieu of any and all other warranties, ex- press or implied, including warranties of merchantability and fitness for a par- ticular purpose. This limited warranty sets forth the ex- clusive remedy for claims based on failure of or defect in products, materi- als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex- tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure When placing an order, indicate the full product name. Please specify the Sprinkler Identification Number (SIN), quantity, and temperature rating. Re- fer to the Price List for complete listing of Part Numbers. Contact your local distributor for avail- ability. Sprinkler Assemblies with NPT Thread Connections: Specify: 1Y4232, (specify tempera- ture rating), Extended Coverage Pen- dent Sprinkler with (specify finish), P/N (specify). 135°F157°C Natural Brass .............PSN 50-801-1-135 White Coated .............PSN 50-8014-135 White (RAL9O1O). .......... PSN 50-801-3-135 Chrome Plated ............PSN 50-801-9-135 155°F168°C Natural Brass .............PSN 50-801-1-155 White Coated .............PSN 50-801-4-155 White (PL9O1O). .......... PSN 561-3-155 Chrome Plated ............PSN 50-801-9-155 *Eastern Hemisphere sales only. Recessed Escutcheon: Specify: Style (30 or 40) Recessed Escutcheon with (specify finish), P/N (specify). Style 30 Recessed Escutcheon Chrome Plated ............PSN 56-705-9.011 White Color Coated ........PSN 56-705-4-011 White (RAL9OIO). .......... PSN 56-705-3-011 Brass Plated ..............PSN 56-705-2-011 Style 40 Recessed Escutcheon Chrome Plated ............PSN 56-700-9-010 White Color Coated ........PSN 56-700-4-010 White (RAL9OIO). .......... PSN 56-700-3-010 Brass Plated ..............PSN 56-700-2-010 *Eastern Hemisphere sales only. Sprinkler Wrench: Specify: W-Type 3 Sprinkler Wrench, P/N 56-895-1-001. Specify: W-Type 23 Recessed Sprin- kler Wrench, P/N 56-000-6-838. Page 6 of 6 TFP2Z3 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 SchedulemOjScheduIe4O Fully Listed and FM Approved Sprinkler Pipe When you spec4 Schedule-I 0/Schedule-40 sprinkler pipe you get a UL listed and FM approved product. Although these products do not require separate approvals, Schedule- I O/Schedule-40 gives you the extra quality assurance you demand. Our Sch-10 (l','"- 8') pipe and Sch-40 (1"- 2") pipe have passed the same thorough lab testing as our other listed pipe products, and receive periodic mill inspections from both UL and FM agents to ensure consistent quality. Schedule-10/Schedule-40 product can be "hot-dip" galvanized to meet FM requirements for dry systems in accordance with the zinc coating specifications of ASTM A-123. Our advanced formula mill coating of- fers a clean, durable surface. It is also paint-ready for custom color applications without special preparation. The internal surface of all black Allied Tube & Conduit Fire Sprinkler pipe products up to 4.5000" in diameter is coated with our new Antibacterial For- mula, "ABF". In scientific laboratory test, ABS proved to have superior resis- tance to microbial colonization of pipe walls, thereby delaying or possibly pre- venting the onset of Microbiologically Influenced corrosion (MIC) when the First Sprinkler System is first installed. Meets "Buy American" requirement and is available through distributors in the USA, Canada and Mexico. Sch-40 Specifications NPS Nominal I.D. WI. WI. (H20 Filled) rcsl WI/LIlt (21') WI/LIft (24') WI/LIft (25') In; mm In; mm Lbs/Fl; Kg/rn Lbs/Fl; Kg/rn Lift Lbs; Kg Lbs; Kg Lbs; Kg 1.049 1.680 2.05 70 2,470 2,822 2,940 25 26.6 2.5 3.05 70 1,120 1,280 1,334 1A' 1.380 2.270 2.93 51 2,431 2,778 2,894 32 35.1 4.36 4.36 51 1,103 1,260 1,313 1W 1.610 2.720 3.61 44 2,513 2,872 2,992 40 40.9 4.0 5.37 44 1,140 1,303 1,357 2.067 3.650 5.13 30 2,300 2,628 2,738 50 52.5 5.4 7.63 30 1,043 1,192 1,242 2/2' 2.469 5.790 7.86 19 2,310 2,640 2,750 65 62.7 8.6 11.73 19 1,048 1,197 1,247 Sch-10 Specifications NPS Nominal I.D. WI. WI. (1,120 Filled) Pcsl WI/Lift (21') WI/lift (24') WI/lift (25') In; mm In; mm Lbsñl; Kg/rn Lbs,R; Kg/rn Lift Lbs; Kg Lbs; Kg Lbs; Kg 1.097 1.400 1.81 91 2,675 3,053 3,185 25 27.9 2.1 2.70 91 1,213 1,385 1,445 11/4" 1.442 1.810 2.52 61 2,319 2,664 2,760 32 36.6 2.7 3.75 61 1,052 1,208 1,252 1W 1.682 2.080 3.04 61 2.664 3,045 3,172 40 42.7 3.1 4.52 61 1,208 1,381 1,439 2.157 2.640 4.22 37 2,051 2,344 2,442 50 54.8 3.9 6.28 37 930 1,063 1,108 2W 2.635 3.530 5.89 30 2,224 2,542 2,648 65 66.9 5.3 8.77 30 1,009 1,153 1,201 3.260 4.330 7.94 19 1,728 1,975 2,057 80 82.8 6.4 11.82 19 784 896 933 4.260 5.610 11.78 19 2,238 2,558 2,665 90 108.2 8.3 17.53 19 1,015 1,160 1,209 5.295 7.77 17.33 10 1,632 1,865 1,943 125 134.5 11.56 25.80 10 740 846 881 6.357 9.290 23.03 10 1,951 2,230 2,322 150 161.5 13.8 34.27 10 885 1,012 1,053 8' 8.249 16.490 40.15 7 2,424 2,770 2,885 200 209.5 24.5 59.75 7 1,100 1,256 1,309 Schedule-10/Schedule-40 pipe are in compliance with the following: ASTM A- 135, and NFPA 13. Both pipe products have a working pressure rating of 300 psi maximum and also meet the stringent requirement for the following tests: Welded Outlets Hydrostatic Pressure Side Wall Rupture Vibration Test tqca/Flow Control () allied TUBE & CONDUIT @ <~> (9 Listed Approved Listed 16100 S. Lathrop' Harvey, IL 60426 Customer Service: 11350 Norcom Rd. - Philadelphia, PA 19154 (800) 882-5543 2525 N. 27th Ave. • Phoenix, AZ 85009 Fax 708-339-1806 S5-3 - IPS CARBON STEEL PPE -HUE CU'r PRODUCTS 1O.5Z F':L1' OP1et: SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS STYLE 922 DIMENSIONS y________________________________________ Yr :::x. 302 13 0 0 1.8 •. 0.45 _ 20 302 325 463 279 983 650 050 '.•' 1316 1.28:1.83 1.10• 3.87 2.56 1.1 132 2.18 1.10 3.87 2.56 1.2 ..:Y:25.:. 30.2 38.6 55.4 27.9 :983 65.0 0.54 31 i 142 195 1.22 408 256 12 30.2 36.1 49531.0 :103.6 65.0 0.54 131e 1.40 1951.22 4.08 2.56 1.2 .20:1 30.2 :35.6 495 31.0 .103.6 65.0 0.54 1 M. 164 20 122 408 256 13 25 30.2 41.7 58.4 31.0 1035 65.0 0.59 - 2 x 36,;- 1316 165 219 46 460 256 13 .50 .:15......H 30.2 42.2 553 : 37.1 116.8 65.0 059 14 1 /6 164 2.19 1.46 460 256 '4 20 - 302 , 417 555 371 _1168 650 064 1 1'/6 188 - 254 146 460 156 15 30.21 7.8 64.5 ; 37.1 116.8 65.0: 0.68 1316 : 1.91 2.44171 5.40 236 1.6 65...........i5 30.2 :483: 62.0 43.4:137.2: 65.0 0.73 1316 :1.89 2.44 1.71 5.40256 1.6 .__30.2-.-4.-48.0...L.. 62.0-- .434- :...-137.2.. 1 1316 213 279 171 540 256 16 302 541 - 709 434 1372 - 65.0 - 073 761mm ½ 1316 - 191 244 171 550 256 16 ......:..1 30.2 483 62.0 :43A 1139.7 65.0 0.73 1'16 189 2.44 171 - 50 - 236 16 - 302 480 - 62.0 434 - 1397 650 073 1 1316 213 279 171 550 236 17 .....:.2s... 30.2 54.1 70.9 43.4 139.7 65.0 0.80 Victaulic female threaded oroducts are designed to accommodate standard NPT or BSPT (optional) male pipe threads only. Use of male threaded products with special features, such as probes, dry pen-dent sprinklers, etc., should be verified as suitable for use with this Victaulic product. Failure to verify suitability in advance may result in assembly problems or leakage. Center of run to engaged pipe end for NPT threads (dimensions are approximate). Www.victauljc.com . j(Ct1UliC VICTAUUC IS A REGISTERED TRADEMARK OF VlCTAuuc COMPANY. © 2006 VICTAUUC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. -. O.S22 1/4' 8002957 GST 100 1/4* • 210 (7/16OSB) 670 (3/4' Ply) 1/4' 8003957 GST200 1/4*? 1760 (Fir) 1/4' 8004957 GST300 1/4x3 2060 (Fir) 3/6' 8007957 GSTIO 114 x V 210 (7116"OSB) 67 (3/4 Ply) 4L<!> 3/8 8008957 GST2O 1/4*2' 1760 (Fir) 3/8' 8068925 GST2O-SS 1/4*2' 1760 (Fir) 3/8" 8009925 6S125-380 3/8*2-1/2' 2113 (Fir) #14 Black 3/8 8010957 65130 1/4 *3' 2060 (F Nut Driver 3/8" 8069925 GST3O-SS 1/4*3" 2060 (Fir) Part #8113910 3/8' 8011925 65740 1/4x4 2180 (Fir) 1/2' 8013925 GST2 1/4*2" 1760 (Fir) J 1/2" 8014925 GST2.5-380 3/8*2-1/2" 2113 (Fir) 1/2' 8015925 GST3 1/4*3" 2275 (Fir) 25 125 300 850 1475 850 1500 1500 1475 25 125 25 125 25 125 25 125 25 125 25 125 25 125 25 125 25 125 25 125 25 125 25 125 SAMM YS® FOR WOOD E 'No pre-drilling required. Quick to install using the Sammy Nut Driver with an 18V cordless dull/driver. Saves time from traditional methods. Reduces installation costs. 'Made in the U.S.A. www.itwbui!dex.comJ I: 1111111171 ~_ #14 SW Red Nut Driver Part #8114910 r MADE IN USA SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe Installation each time. When the face of the driver comes Into contact with the material you are Installing Into, continue drilling until nut drIver spins free. Installation Is then complete. Warranty requires the use of the appropriate nut driver for Installations. < CFM > . &USL S APPROVED USTED PIPE HANGER CABLE HARDWARE ALSO LISTED ASANCH.. FORLUMNAMUM WOOD - Pipe Haner Approvals MR 0 0- 8020957 SWG 10 3/6' Horizontal CFVC 1_1/2' 300 1-11T ot Gsr% MOW 4 14 1? 8068925 GST2O-SS 3/8" Vertical 2-1/2" 850 1-1/2" i Vecai 1500 112 8009925 GST 25-380 3/8' Vertical 4' 1500 1-1/? üoai i i - 8021957 SWG2O 3/8" Horizontal 2-112"-3'"" 1050 1-1/2" 807395 JNG 2-S 3/8 ., 2 1i. mm f1/2' 8139957 SH-GST2O 31.8" 17° Angle off Vertical 3" 1050 1-112" 4' 1475 STEEL - Pipe Hanger Approvals . 8037957 DSTR 1-1/2 .3/8" Vertical 4' 1500 .035' 4' 1475 .105' 4$10 8045957 DST 516 3/8" Vertical 4" 1500 .1881. 4' 1475 .188' 50 250 j" lTh i88 8055957 SWDR 1 M. Horizontal 4' 1500 .037" 4' 1475 .060" 8054957 SWDR1-112 3/8' Horizontal 4" . 1500 .037" 4' 1475 . 060' 8150922 XP 20 3/8' Vertical 2-1/2" 850 .027" T 940 .02V 4 1475 .105' 8294922. SXP 20 3/8" Vertical or up to 45" 2' 750 .027" 2' 635 .029" 8293957 SWXP35 3/8" Horizontal 3-1/2' 1250 .060' COCT - Pipe Hanger Approvals Am', i ~' Mmm"n~'-'n My 8061957 SWC 20 3/8" Honzoiital 4' 1475 3000 8150922 XP 20 3/8' Vertical 2-1/2" 850 Post-Pour Range II LWC S 35 PCF Qbs/ft3) SWG 25480 Manimum pipe size in wnpndto wand joint allowed by UL is 3-Itt UI. and FM (coin were Performed in compliance with NA 13 Sterrdurd& SW13 25-380 Meronnjm pipe size in wood Umber or joint allowed by UI Is 4' Fanturrbig roqrdrmrrant 5 times woigid of water-fund sthndute 40 pipe piss 250 pounds. 20 Ma mum pipe size inwrpooile wood joint altowed by UL is 2-lit ....,, "SWG 20 MaxImum alzo In Umber by pipe wood enjoist allowed ULint . Satnmys' and Truss-T Hangwe are registered trademarks of ITW Bufidex and Illinois Tool Works, Inc. . . . © 2008 (1W OsOAco and IWncinTeel REV. 0708 sSS40 WWWjtevuUtiueXCom S SmrrH ., CoopER INTERN AT I ON AL Ductile Iron Threaded Fittings C I us * ALL FITTINGS 100% AIR fThrJ * ASME/ ANSI B16.3 * ISO 9001:2000 MANUFACTURER * ASTM A536 Grade 65, AC; ,12 LISTED * LISTED/APPROVED AT 500 PSI * ASME/ ANSI B 120.1 Ductile Iron Bull I-Ied Te Diwl-ile Iron Rpdtwiny Tee APPROVED Figure 35RT Figure 35BT kId Size A B C wgt 314x3/4x1 1.45 1.45 1.37 0.68 1 x 1 x 1..1/4 1.67 1.67 1.58 0.97 1x1x1-1/2 1.80 1.80 1.65 1.14 1-1/4 x1x1-1/2 1.88 1.801 1.82 1.43 1-1/4 x1-1/4x1-1/2 1.88 1.881 1.82 1.52 1-1/4 x1-1/4x2 2.10 2.10 ..90 2.00 1-1/2x1-114x2 2.16 2.10 2.02 1.94 1-1/2x1-1/2x2 2.16 2.16 2.02 2.00 2 x 2 x 2-1/2 2.60 2.60 2.39 3.67 l)ucfile Iron Hey Retiuring Coiinlino Figure 35RC Size r wr I ' lxl/2 1.69 0.40 1 x 3/4..... -.... . 1.69 0.38 1-1/4x3/4 2.06 0.53 2x1 (not hex) 281 0.53 Ductile Iron Crncc & Rediwinu- ('rnc Figure 35X Size A B k--A--4--A--. - i 1 1.50 1.50 0.97 1-1/4 1.75 .1.75 1.59 1-1/2 194 194 1.89 2 2.25 2.25 2.93 Figure S Size _A 1-114x1. 1.67 1.58 1.25 1-1/2x1 1.80 1.65 1.48 2 x I . 2.02 1.73 2.64 Ductile Iron P1un Figure 35SP Size •• Wgt I 4 I 1/2 0.94 0.10 3/4 1.12 0.18- 1 1.25 0.28 1-1/4 1.37 0.50 1-1/2 1.44 1 0.70 2 1.50 1 0.90 Size T T C WT 3/4x314x 112 1.20 1.20 1.22 0.46 1.x1/2x1 1.50 1.36 1.50 0.70 1x3/4x3/4 1.38 1.31 1.45 0.68 1 x 3/4 x 1 1.50 1.45 1.50 .0.77 1x1x112 1.26 1.26 1.36 0.66 1 xi x3/4 1.38 1.38 1.45 0.73 1-114x1/2x1-1/4 1.75 1.53 1.75 1.04 1-114 x 3/4 x 1-1/4 1.75 1.62 1.75 1.09 1-1/4xlx1/2 1.34 1.26 1.53 1 0.81 1-1/4 x1x314 145 1.38 1.63 1 0.90 1-1/4x lxi 1.58 1.50 1.69 1.03 1-1l4xlx1-114 1.75 1.69 1.75 1.10 1-114x1-1/4x1/2 1.34 1.34 1.53 0.87 1-1/4x1-1/4x3/4 1.45 1.45 1.62 .0.96 1-1/4x1-1/4x1 1.58 1.581 1.67 1.10 1-1/2 x 1/2 x 1-1/4 TT 1.56 1.88 1.7 1-1/2x1/2x1-1/2 1.94 1.66 1.94 1.4f- 1-1/2 1.94 1.66 1.88 1.42 -1/2x3/4.x1-112 .. 1.94. 1.75 .1.94 .1.47 1-1l2x1x1/2 1.44 1.25 1.69 0.97 -112x1x3/4 1.50 1.44 1.75 1.14 1-1/2x1x1 1.65 1.50 1.80 1.14 1-1/2x1x1-1/4 1.82 1.67 1.88 1.47 1-112x I x 1-1/2 1.94 1.80 1.94 1.52 1-112x1-114x1/2 1.41 - .34 1.66 1.03 i-1/2x1-114x3/4 .1.52 1.45 1.75 1.10 l-1/2x1-1/4x1 1.65 1.58 1.80 1.31 1-112x1-114x1-1/4 1.82. 1.75 1.88 1.52 1-1/2x1-114x1-112 1.94 1.88 1.94 1.50 1-1/2x1-1/2x112 1.41 1.41 1.66 1.14 1-1/2x1-1/2x3/4 1;52 1.52 1.75 1.23 1-1/2x1-1/2x1 1.65 1.65 1.80 1.38 1-112x1-1/2x1-1/4 1.82 1.82 1.88 1.50 2 x 1 x 2 2.25 • 2x1-1/4x2 2.25 2.10 2.25 2.31 2x 1-112x 1/2 1.49 1.41 1.88 .1.50 2x 1-112 x 3/4 1.60 1.52 1.97 1.61 2x 1-112x 1 1.73 1.65 2.02 1.65 2 x 1-1/2 x 1-1/4 1.90 1.82 2.10 2.03 2x1-1/2x1-1/2 2.02 1.94 2.16 2.37 2 x 1-1/2 x 2 2.25 2.16 2.25 2.53 2x2x1/2 . 1.49 1.49 1.88 1.50 2 x 2x 3/4 1.60 1.60 1.97 1.67 2 x 2 x 1 1.73 1.73 2.02 1.91 2x2x1-1/4 . 1.90 1.90 2.10 2.05 2x2x1-1/2 2.02 2.02 2.16 2.11 <@> SMITH n, COOPER IN T RN AT ION AL Ductile Iron Threaded Fittings C ®us * ALL FITTINGS 100% AIR TESTED *ASNIE/ ANSI B16.3 * ISO 9001:2000 MANUFACTURER * ASTM A536 Grade 65,45,12 LISTED * LISTED/APPROVED AT 500 PSI * ASME/ ANSI B 1.20.1 APPROVED Ductile Iron 900 Elbow Figure 35E Size A - t 1/2 1.13 0.24 3/4 1.31 0.40 1 1.50 0.64 1-1/4 1.75 0.95 1-1/2 1.94 2 12.70 1, 2.25 J3.2 2-1/2 Tltir4ilp Iron Rpdiwno QII° Fl how Figure 35RE Size 3/4 x 1/2 1.22 1.20 0.33 I x 1/2 1.36 1.26 0.44 1 x3/4 1.45 1.38 0.53 -1/4x1/2 1.53 1.34 0.64 -1/4x3/4 1.631 1.45 0.75 -1/4x1 1.671 1.58 0.77 -1/2 x 1/2 1.7 i5 1-1/2x3/4 1.75 1.52 0.95. 1-1/2 x 1 1.801.65 0.99 1-1/2x1-1/4 1.88 1.82 1.14 • mWL 2x112 1.97 1.60 1.35 2x3/4 1.97 1.60 1.39 2x1 2.02 1.73 1.58 2x1-1/4 2.10 1.90 1.62 2x1-1/2 2.16 2.02 1.67 2-1/2 x 1-1/2 2.51 2.16 2.32 2-1/2x2 2.60 1 2.39 3.01 Ductile Iron Brass Seat Union Figure 35U Size -A -wr T 1/2 1.88 öY 1 2.19 1.08 1-1/4 2.50 , 1.54 1-1/2 2.62 203 2 3.1 2 1 r)iief-ilp Iron To Figure 35T Size A Wgt - -A -IN -A- 1/2 113 0.33 1 I .- I I .1 -Li 1-1/41.75130 1-1/2 1.94 1.63 12-1/2 2 2.25 263 2.70 1 4.55 Dun-Hp lion rniinlin Figure 35CP Size A JWgt t A 1 1/2 1.38 0.18 3/4 1.63 0.26 1 1.75 0.44 1-1/4 2.00 0.54 1-1/2 2.19 0.71 2 262 1.15 2-1/2 3.00 2.29 Ductile Iron Can Figure 35C Size A Jg Ir 3/4 A' 1/2 0.87 0.15 097 02 1TI 1-114 1.28 054 1-1/2 1.33 0.68 2t4506 2-1/2 1.70 T5 - Ductile.Iron Hex Bushing . - Figure 35HB Size A VJi Ii A 4' 1x1/2 1.06 0.22 1x3/4 1.06 0.18 1-1/4 x 1 :i 1-1/2x1 1.25 0.53 1-1/2 x 1-1/4 1.25 0.35 2x1 138 0.75 2x1-1/4 1.38 0.69 2x1-112 1.38 0.62 Ductile Trnn ço FThow Figure 35F Size ••A Wgt - A 4 /2 0.88 0.22 3/4 0 1 1.13 048 /4 1.29 0.73 /2 144 0.93 L2- El69L 2.70 /21 95 Ductile Iron Beam ('lamns AA Figure 35SP - Size A 9! 3/8 0.75 0.31 1/2 075 054 1— tqculFire & Building Products Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 A Oem Customer Service/Sales: Tel: (414) 570-5000 / (800) 558-5236 Fax: (414) 570-5010/(800) 877-1295 Series TYIFRB — 2.8,42,56, and 80 K-factor Upright, Pendent, and Recessed Pendent Sprinklers Quick Response, Standard Coverage General Description The Series TY-FRB, 2.8, 4.2, 5.6, and 8.0 K-factor, Upright and Pendent Sprinklers described in this data sheet are quick response - standard cover- age, decorative 3 mm glass bulb type spray sprinklers designed for use in light or ordinary hazard, commercial occupancies such as banks, hotels, shopping malls, etc. The recessed version of the Series TY-FRB Pendent Sprinkler, where ap- plicable, is intended for use in areas with a finished ceiling. It uses either a two-piece Style 10 (1/2 inch NPT) or Style 40 (3/4 inch NPT) Recessed Es- cutcheon with 1/2 inch (12,7 mm) of recessed adjustment or up to 3/4 inch (19,1 mm) of total adjustment from the flush pendent position, or a two-piece Style 20(1/2 inch NPT) or Style 30(3/4 inch NPT) Recessed Escutcheon with 1/4 inch (6,4 mm) of recessed adjust- ment or up to 1/2 inch (12,7 mm) of total adjustment from the flush pen- dent position. The adjustment provided by the Recessed Escutcheon reduces the accuracy to which the fixed pipe drops to the sprinklers must be cut. Corrosion resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be ob- tained when exposed to corrosive at- mospheres. Although corrosion resis- tant coated sprinklers have passed the standard corrosion tests of the appli- cable approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suitability of these coatings for any given corro- sive environment. The effects of ambi- ent temperature, concentration of chemicals, and gas/chemical velocity, should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. An intermediate level versions of the Series TY-FRB Pendent Sprinklers are detailed in Technical Data Sheet TFP356, and Sprinkler Guards are de- tailed in Technical Data Sheet TFP780 WARNINGS The Series TY-FRB Sprinklers de- scribed herein must be installed and maintained in compliance with this document, as well as with the applica- ble standards of the National Fire Pro- tection Association, in addition to the standards of any other authorities ha v- ing jurisdiction. Failure to do so may impair the integrity of these devices. The owner is responsible for main tam- ing their fire protection system and de- vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted relative to any questions. Model/Sprinkler Identification Numbers TY1131 - Upright 2.8K, 1/2'NPT TY1231 - Pendent 2.8K, 1/2NPT TY2131 - Upright 4.2K, 112 NPT TY2231 - Pendent 4.2K, 1/2NPT TY3131 - Upright 5.6K, 1/2"NPT TY3231 - Pendent 5.6K, 1/2NPT TY4131 - Upright 8.0K, 3/4'NPT TY4231 - Pendent 8.01K, 3/4'NPT Technical Data Approvals UL and C-UL Listed. FM, LPCB, and NYC Approved. (Refer to Table A for complete approval information including corrosion resis- tant status.) Maximum Working Pressure 175 psi (12,1 bar) Discharge Coefficient K = 2.8 GPM/psi112 (40,3 LPM/bar112) K = 4.2 GPM/p5i112 (60,5 LPM/bar1l2) K = 5.6 GPM/p5i112 (80,6 LPM/barl/2) K = 8.0 GPM/psi1/2 (115,2 LPM/barl'2) Temperature Ratings Refer to Table A and B Finishes Sprinkler: Refer to Table A and B Recessed Escutcheon: White Coated, Chrome Plated, or Brass Plated Physical Characteristics Frame ............Bronze Button ........Brass/Copper Sealing Assembly .......... Beryllium Nickel w/Teflont Bulb ..............Glass Compression Screw .....Bronze Deflector .......Copper/Bronze Bushing (K=2.8) .......Bronze Page 1 of 8 APRIL, 2003 TFPI7I ESCUTCHEON 7/16'(11,1 mm) PLATE SEATING • ** NOMINAL SURFACE 1- MAKE-IN Page 2 of 8 TFPI7I TS 1 STYLE 10 or 20 RECESSED SSU* ESCUTCHEON DEFLECTOR 7/16" (11,1 mm) NOMINAL MAKE-IN I 2-3/16' WRENCH $ (55,6 mm) 7 FLA 1/2' NPT** t SSP DEFLECTOR *1.H- 2-7/8' (73,0 mm) DIA. PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION -Frame 3- Sealing 4- Bulb 6- Deflector * Temperature rating is indicated on deflector or adjacent to 2- Button Assembly 5- Compression 7- Bushing orifice seat on frame. Screw Pipe thread connections per ISO 7/1 can be provided on special request. FIGURE 1 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TYII3I) AND PENDENT (TY1231) SPRINKLERS 2.8 K-FACTOR, 1/2 INCH NPT ESCUTCHEON 7/16'(11,1 mm) STYLE 10or20 PLATE SEATING 1/2' ** NOMINAL RECESSED SSU* SURFACE MAKE-IN ESCUTCHEON NPT DEFLECTOR 7/16" 6* 2-3/16' t (11,1 mm) NOMINAL /16' 2 (55,6 mm) (38,1mm) : iiMAKElN 1-1/2" 2-3 WRENC ____ (55,6mm)3 FLATS SSP DEFLECTOR* 2-7/8 (73,0 mm) DIA. --] 1/2' NPT** PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION - Frame 3 - Sealing 4-Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to 2 - Button Assembly 5 - Compression orifice seat on frame. Screw **Pipe thread connections per ISO 7/1 can be provided on special request. FIGURE 2 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY2131) AND PENDENT (TY2231) SPRINKLERS 4.2 K-FACTOR, 112 INCH NPT i\ (12,7 mm) NOMINAL : 1/2° MAKE-IN - 1 2-1/4° 57,2 mm) / 3 ( 1 3/4' NPT** t UPRIGHT CROSS SECTION WRENCH FLATS -7/8' (73,0 mm) DIA. ESSED PENDENT TFPI7I Page 3 of 8 T_ 2-3/16' (55,6 mm) T STYLE 10or20 RECESSED SSU* ESCUTCHEON DEFLECTOR 7/16° 1. )WRENCH IiV11''Ii\ (11,1 mm) I NOMINAL - MAKE-IN 2-3/16° 1 (55,6 mm) FLATS 1 1/2NPT** t ESCUTCHEON PLATE SEATING SURFACE 7/16"(11,1 mm) 1/2° ** NOMINAL MAKE-IN NPT SSP DEFLECTOR* 1- 2-7/8" (73,0 mm) DIA. 6* Ii' PENDENT RECESSED PENDENT UPRIGHT CROSS SECTION 1 - Frame 3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent to 2 - Button Assembly 5 - Compression orifice seat on frame. Screw **Pipe thread connections per ISO 7/1 can be provided on special request. FIGURE 3 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY3131) AND PENDENT (TY3231) SPRINKLERS 5.6 K-FACTOR, 1/2 INCH NPT STYLE 30 or 40 RECESSED SSU* ESCUTCHEON DEFLECTOR ESCUTCHEON 1/2 (12,7 mm) PLATE SEATING 3/4fl ** NOMINAL SURFACE MAKE-IN NPT 2-5/16' (58, mm) I 1-9/16° I (39,7 mm) _WL SSP DEFLECTOR* PENDENT RE( 1 - Frame 3- Sealing 4- Bulb 6- Deflector * Temperature rating is indicated on deflector or adjacent to 2 - Button Assembly 5- Compression orifice seat on frame. Screw **Pipe thread connections per ISO 7/1 can be provided on special request. FIGURE 4 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY4 131) AND PENDENT (TY4231) SPRINKLERS 8.0 K-FACTOR, 3/4 INCH NPT Operation The glass Bulb contains a fluid which expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass Bulb, allowing the sprinkler to activate and water to flow. Design Criteria The Series TY-FRB Pendent and Up- right Sprinklers are intended for fire protection systems designed in ac- cordance with the standard installation rules recognized by the applicable Listing or Approval agency (e.g., UL Listing is based on the requirements of NFPA 13, and FM Approval is based on the requirements of FM's Loss Pre- vention Data Sheets ). Only the Style 10, 20, 30, or 40 Recessed Escutch- eon, as applicable, is to be used for recessed pendent installations. Page 4 of 8 SPRINKLER FINISH (See Note 7) K TYPE TEMP. BULB LIQUID NATURAL BRASS I CHROME PLATED WHITE" 1POLYESTER 2.8 1/2" PENDENT (TY1231) and UPRIGHT 1'h131) 135°F/57°C Orange 12,3,5 155°F/68C Red 175°F/79°C Yellow 200°F/93°C Green 286°F/141 °C Blue NPT RECESSED PENDENT (TY2231)" Figure 5 135°F/57°C Orange 1, 2, 5 155°F/68°C Red 175°F179°C Yellow 200°F/93°C Green 135°F/57C Orange RECESSED PENDENT (TY2231) Figure 6 155F/68°C Red 175°F179°C Yellow 200°17/930C Green 4.2 1/2' NPT PENDENT (TY2231) and UPRIGHT '3131) 135°F/57°C Orange 1,2 155°F168°C Red 175°F/79"C Yellow 200°F/930C Green 286°F/141°C Blue RECESSED PENDENT (TY2231)* Figure 7 135°F/57°C Orange 1550F/680C Red 175°F179°C Yellow 200°F/93°C Green 135°F/57°C Orange RECESSED PENDENT (rY2231)" Figure 8 155°F/68"C Red 175°F179"C Yellow 200°F/93°C Green NOTES: Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL) as Quick Response Sprinklers. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprin- klers. 5. Approved by the City of New York under MEA 354-01-E. 7. Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed, the sprin- klers are UL and C-UL Listed as Corrosion Resistant Sprinklers. * Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4' Total Adjustment Re- cessed Escutcheon, as applicable. Installed with Style 20 (1/2' NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Re- cessed Escutcheon, as applicable. Frame and Deflector only. Listings and approvals apply to all colors (Special Order). N/A: Not Available TABLE A LABORATORY LISTINGS AND APPROVALS 2.8 AND 4.2 K-FACTOR SPRINKLERS TFPI7I Installation The Series TY-FRB Sprinklers must be installed in accordance with the follow- ing instructions: NOTES Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprinkler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 inch (1,6 mm) for the 1350F/570C to 3/32 inch (2,4 mm) for the 2860F/141°C temperature ratings. A leak tight 1/2 inch NPTsprinkler joint should be obtained with a torque of 7 to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi- mum of 21 ft. lbs. (28,5 Nm) of torque may be used to install sprinklers with 1/2 NPT connections. A leak tight 3/4 inch NPT sprinkler joint should be ob- tained with a torque of 10 to 20 ft.lbs. (13,4 to 26,8 Nm). A maximum of 30 ft.lbs. (40,7 Nm) of torque is to be used to install sprinklers with 3/4 NPT con- nections. Higher levels of torque may distort the sprinkler inlet and cause leakage or impairment of the sprinkler. Do not attempt to make-up for insuffi- cient adjustment in the escutcheon plate by under- or over-tightening the sprinkler. Readjust the position of the sprinkler fitting to suit. The Series TY-FRB Pendent and Up- right Sprinklers must be installed in accordance with the following instruc- tions. Step 1. Pendent sprinklers are to be installed in the pendent position, and upright sprinklers are to be installed in the upright position. Step 2. With pipe thread sealant ap- plied to the pipe threads, hand tighten the sprinkler into the sprinkler fitting. Step 3. Tighten the sprinkler into the sprinkler fitting using only the W-Type 6 Sprinkler Wrench (Ref. Figure 13). With reference to Figures 1, 2, 3, and 4, the W-Type 6 Sprinkler Wrench is to be applied to the sprinkler wrench flats. The Series TY-FRB Recessed Pen- dent Sprinklers must be installed in accordance with the following instruc- tions. Step A. After installing the Style 10. 20, 30, or 40 Mounting Plate, as appli- cable, over the sprinkler threads and with pipe thread sealant applied to the pipe threads, hand tighten the sprin- kler into the sprinkler fitting. Step B. Tighten the sprinkler into the TFPI7I Page 5 of 8 SPRINKLER FINISH (See Note 7) K TYPE TEMP. BULB NATURAL BRASS I CHROME PLATED I LIQUID POLYESTER WHITE" LEAD COATED 5.6 PENDENT (TY3231) and UPRIGHT ('3131) 135°F/570C Orange 1,2,3,4,5,6 1,2,3,5 155"F/68°C Red 175°F179°C Yellow 200°F/93"C Green 286°F/141°C Blue 1/2" NPT 135°F/57"C Orange 1,2,4,5 N/A RECESSED PENDENT (TY3231)" Figure 9 155"F/68°C Red 175FI79"C Yellow 200F/93°C Green 135°F/57°C Orange 1, 2,3, 4, 5 I I I I 1,2, 4, 5 I Green N/A RECESSED PENDENT (TV3231)" Figure 10 155°F/680C Red 175"F/79°C Yellow 200°F/93°C 8.0 PENDENT (TY4231) and UPRIGHT Y4131) 1350F/57°C Orange 1,2, 3,4,5,6 1,2,5 155"F168°C Red 175°F179°C Yellow 200°F/93°C Green 286°F/141"C Blue 3/4" NPT 135°F/57°C Green 1, 2, 4, 5 N/A RECESSED PENDENT (TY4231)* Figure 11 155°17/680C Orange 175°F179°C Red 200°F/93°C Yellow 135°F/57°C Orange 1,2,3,4, 5 N/A RECESSED PENDENT (TY4231) Figure 12 1550F/68"C Red 175°F/79°C Yellow 200"F/93"C Green NOTES: Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL) as Quick Response Sprinklers. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers. Approved by the Loss Prevention Certification Board (LPCB) as Quick Response Sprinklers; however, the LPC does not rate the thermal sensitivity of recessed sprinklers. Approved by the City of New York under MEA 354-01-E. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31-53-428-3377). Where Polyester Coated and Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a Corrosion Resistant Sprinklers. * Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable. Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable. Frame and Deflector only. Listings and approvals apply to all colors (Special Order). N/A: Not Available TABLE B LABORATORY LISTINGS AND APPROVALS 5.6 AND 8.0 K-FACTOR SPRINKLERS sprinkler fitting using only the W-Type 7 Recessed Sprinkler Wrench (Ref. Figure 14). With reference to Figure 1, 2, 3, and 4, the W-Type 7 Recessed Sprinkler Wrench is to be applied to the sprinkler wrench flats. Step C. After the ceiling has been in- stalled or the finish coat has been ap- plied, slide on the Style 10, 20, 30, or 40 Closure over the Series TY-FRB Sprinkler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. Page 6 of 8 TFPI7I - 2-7/8' DIA. - 5/8±1/4" (73,0 mm) 3/4" (19,1 mm) SPRINKLER *(3,L2 ATE I FACE OF 572 mm) NTING (15,9±6,4 mm) 2-1/4" DIA. j 1/4" (6,4 mm) I I M(3,2 mm) FITTING /8' I MOUNTING CLOSURE SERIES 1-16" (33.3 mm) SURFACE ______ TY-FRB 13/16" (20,6 mm) FIGURE 5 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 2.8 K-FACTOR, 1/2 INCH NPT 2-7/8" DIA. - 5/8±1/4" (73,0 mm) 3/4(19,1 mm) (15,9±6,4 mm) 2-1/4" DIA. 1/4" (6,4 mm) FACE OF (57,2 PLATE FITTING 1/8 2 mm) (3, SPRINKLER - MOUNTING SURFACE - t MOUNTING/ SERIES 1-1/4"(31,8 mm) CLOSURE TYfRB 3/4"(19,1 mm) FIGURE 7 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 4.2 K-FACTOR, 1/2 INCH NPT 2-7/8" DIA. (73,0 mm) 1/2"(12,7 mm) E (12,7±3,2 mm) 2-1/4" DIA. 1/4' (6,4 mm) I FACE OF MOUNTING SPRINKLER PLATE "57,2mm) I FITTING 1/8' I / (32mm) MOUNTING / SURFACE//f 1 CLOSURE SERIES (33,3 mm) TV-FRB 1-1/16" (27,0 mm) FIGURE 6 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 2.8 K-FACTOR, 1/2 INCH NPT - 2-7/8 DIA. (73,0 mm) 1/2±1/8" 1/2'(12,7 mm) [(12,7±3,2mm) 2-1/4" DIA. 1/4" (6,4 mm) FACE OF (572mm) MOUNTING SPRINKLER 1/7- PLATE FITTING 1(8' (32 mm) \ I MOUNTING SURFACE SERIES 1-1/4'(31,8 mm)f CLOSURE TY.FRB 1"(25,4 mm) FIGURE 8 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 4.2 K-FACTOR, 1/2 INCH NPT Care and Maintenance The Series TY-FRB Sprinklers must be maintained and serviced in accord- ance with the following instructions: NOTES Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shutdown the affected fire protection system must be obtained from the proper authorities and all personnel who maybe affected by this action must be notified. Absence of an escutcheon, which is used to cover a clearance hole, may delay the time to sprinkler operation in a fire situation. Sprinklers that are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated or otherwise altered after leaving the factory. Modi- fied sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid dam- age to the sprinklers - before, during, and after installation. Sprinklers dam- aged by dropping, striking, wrench twist/slippage, or the like, must be re- placed. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. (Ref. Installation Section). Frequent visual inspections are rec- ommended to be initially performed for corrosion resistant coated sprinklers, after the installation has been com- pleted, to verify the integrity of the cor- rosion resistant coating. Thereafter, annual inspections per NFPA 25 should suffice; however, instead of in- specting from the floor level, a random sampling of close-up visual inspec- tions should be made, so as to better determine the exact sprinkler condi- TFPI7I 2-7/8' DIA. 5/8±1/4' (73,0 mm) 3/4' (19,1 mm) (15,9±6,4 mm) - 2-1/4' DIA. I 114 (6,4 mm) FACE OF (57,2 mm) MOUNTING 1/8' SPRINKLER PLATE I FITTING (3,12 mm) MOUNTING / I SURFACE SERIES 1-1/4' (31.8 mm) I CLOSURE TYFRB 3/4(19,1 mm) FIGURE 9 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 5.6 K-FACTOR, 1/2 INCH NPT 2-7/8' DIA. 5/8±1/4' (73,0 mm) 3/4(19,1 mm) (15,9±6,4mm) 2-1/4' DIA. 114"(6,4 mm) FACE OF MOUNTING SP FITTING NKLER ZII PLATE MOUNTING /" SURFACE,/ CLOSURE SERIES TY-FRB 13/16'(20,6 mm) FIGURE 11 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 40 RECESSED ESCUTCHEON 8.0 K-FACTOR, 3/4 INCH NPT Page 7 of 8 - 2-7/8' DIA. 1/2±1/8" I (73,0 mm) 1/2"(12,7 mm) (12,7±3,2 MM) 2-1/4' DIA. 1/4' (6,4 mm) SPRINKLER PLATE FACE OF 157.2 mm) MOUNTING I FITTING 1/8' / (3,2 mm) \ MOUNTING SURFACE SERIES 1-1/4'(31,8 m CLOSURE TY.FRB 1'(25,4 mm) FIGURE 10 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 5.6 K-FACTOR, 1/2 INCH NPT - 2-7/8' DIA. 1/2±1/8' (73,0 mm) 1/2(12,7mm) (12,7±3,2 mm) 2-1/4' DIA. 1/4' (6,4 mm) FACE OF (57,2 mm) MOUNTING FITTING SPRINKLER PLATE I t32 mm) T__7__ - MOUNTING SURFACE CLOSURE SERIES 1-5/16"(33,3 mm) TY-FRB .1.1/16'(27,Omm) FIGURE 12 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 30 RECESSED ESCUTCHEON 8.0 K-FACTOR, 3/4 INCH NPT tion and the long term integrity of the corrosion resistant coating, as it may be affected by the corrosive conditions present. The owner is responsible for the in- spection, testing, and maintenance of their fire protection system and de- vices in compliance with this docu- ment, as well as with the applicable standards of the National Fire Protec- tion Association (e.g., NFPA 25), in addition to the standards of any other authorities having jurisdiction. The in- stalling contractor or sprinkler manu- facturer should be contacted relative to any questions. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service. WRENCH RECESS (END 'A" USED FOR 1/2" NPT MODELS) WRENCH RECESS (END 'B' USED FOR 3/4' NPT MODELS) FIGURE 13 W-TYPE 6 SPRINKLER WRENCH WRENCH RECESS PUSH WRENCH IN TO ENSURE ENGAGEMENT WITH SPRINKLER WRENCHING AREA FIGURE 14 W-TYPE 7 RECESSED SPRINKLER WRENCH Page 8 of 8 TFPI7I P/N 57 - XXX - X - XXX I L MODEUSIN 330 2.8K UPRIGHT (1/2'NPT) TY1131 331 2.8K PENDENT (1/2'NPT) 1Y1231 340 4.2K UPRIGHT (1/2'NPT) TY2131 341 4.2K PENDENT (1/2'NPT) TY2231 370 5.6K UPRIGHT (1/2'NPT) TY3131 371 5.6K PENDENT (1/2'NPT) 1Y3231 390 8.0K UPRIGHT (3/4"NPT) TV4131 391 8.0K PENDENT (3/4'NPT) 1Y4231 I I 155 175 200 286 RATING L 135 SPRINKLER 1 NATURAL BRASS 155°F/68°C 4 WHITE POLYESTER 175F/79°C 9 CHROME PLATED 200°F/93°C 7 LEAD COATED 286°F/141°C TABLE C PART NUMBER SELECTION SERIES TY-FRB PENDENT AND UPRIGHT SPRINKLERS Limited Warranty Products manufactured by Tyco Fire Products are warranted solely to the original Buyer for ten (10) years against defects in material and work- manship when paid for and properly installed and maintained under normal use and service. This warranty will ex- pire ten (10) years from date of ship- ment by Tyco Fire Products. No war- ranty is given for products or components manufactured by compa- nies not affiliated by ownership with Tyco Fire Products or for products and components which have been subject to misuse, improper installation, corro- sion, or which have not been installed, maintained, modified or repaired in ac- cordance with applicable Standards of the National Fire Protection Associa- tion, and/or the standards of any other Authorities Having Jurisdiction. Mate- rials found by Tyco Fire Products to be defective shall be either repaired or replaced, at Tyco Fire Products sole option. Tyco Fire Products neither as- sumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco Fire Products shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer's representatives. IN NO EVENT SHALL TYCO FIRE PRODUCTS BE LIABLE, IN CON- TRACT, TORT, STRICT LIABILITY OR UNDER ANY OTHER LEGAL THE- ORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR CHARGES, RE- GARDLESS OF WHETHER TYCO FIRE PRODUCTS WAS INFORMED ABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT SHALL TYCO FIRE PRODUCTS' LI- ABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE. vr — Ordering Procedure When placing an order, indicate the full product name. Refer to the Price List for complete listing of Part Numbers. Contact your local distributor for avail- ability. Sprinkler Assemblies with NPT Thread Connections: Specify: (Specify Model/SIN), Quick Response, (specify K-factor), (specify temperature rating), Series TY-FRB (specify Pendent or Upright) Sprinkler with (specify type of finish or coating), P/N (specify from Table C). Recessed Escutcheon: Specify: Style (specify) Recessed Es- cutcheon with (specify finish), P/N (specify). 1/2' (15 mm) Style 10 Chrome Plated .........P/N 56-701-9-010 1/2 (15 mm) Style 10 White Color P/N 56-701-4-010 Coated.. ....... 1/2' (15 mm) Style 10 Brass Plated ...........P/N 56-701-2-010 1/2' (15 mm) Style 20 Chrome Plated .........P/N 56-705-9-010 1/2' (15 mm) Style 20 White Color Coated ................P/N 56-705-4-010 1/2' (15 mm) Style 20 Brass Plated ...........P/N 56-705.2-010 3/4' (20 mm) Style 30 Chrome Plated .........P/N 56-705-9.011 3/4" (20 mm) Style 30 White Color Coated ................P/N 56-705-4-011 3/4' (20 mm) Style 30 Brass Plated ...........P/N 56-705-2-011 3/4' (20 mm) Style 40 Chrome Plated .........P/N 56-700-9-010 3/4 (20 mm) Style 40 White Color Coated ................P/N 56-700-4-010 3/4' (20 mm) Style 40 Brass Plated ...........P/N 56-700-2-010 Sprinkler Wrench: Specify: W-Type 6 Sprinkler Wrench, P/N 56-000-6-387. Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001. TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 Check a License - License Detail - Contractors State License Board Page 1 of 1 Department of Consumer Affairs Contractors State Lnse oard Contractor's License Detail - License # 895722 as DISCLAIMER: A license status check provides information taken from the CSLB license database. Before relying on this information, you should be aware of the following limitations. CSLB complaint disclosure is restricted by law (B&P 7124.6) If this entity is subject to public complaint disclosure, a link for complaint disclosure will appear below. Click on the link or button to obtain complaint and/or legal action information. Per B&P 7071.17 only construction related civil judgments reported to the CSLB are disclosed. Arbitrations are not listed unless the contractor fails to comply with the terms of the arbitration. Due to workload, there may be relevant information that has not yet been entered onto the Boards license database. License Number 895722 Extract Date 4/18/2012 PACIFIC FIRE SYSTEMS INC 13142 NELSON LANE Business Information POWAY, CA 92064 Business Phone Number:(858) 722-9865 _Entty Corporation Issue Date 05/02/2007 Expire Date 05/31/2013 ACTIVE License Status This license is current and active. All information below should be reviewed. CLASS DESCRIPTION Classifications C16 FIREPROTECTIONCONTRACTOR CONTRACTOR'S BOND This license filed Contractor's Bond number SC6356017 in the amount of $12,500 with the bonding company AMERICANCONTRACTORSINDEMNITYCOMPANY. Effective Date: 03/02/2009 Contractor'sBondingHistory Bonding BOND OF QUALIFYING INDIVIDUAL 1. The Responsible Managing Officer (RMO) MORAN DARIEN CHARLES certified that he/she owns 10 percent or more of the voting stock/equity of the corporation. A bond of qualifying individual is not required. Effective Date: 05/02/2007. BQI's Bonding History This license has workers compensation insurance with the Workers' Compensation MARKELINSURANCECOMPANY Policy Number:MWC000213601 https ://www2.cslb.ca.gov/OnlineServices/CheckLicensell/LicenseDetail.aspx?LicNum8... 04/18/2012