The URL can be used to link to this page

Home My WebLink About2091 RUTHERFORD RD; 150; FPC2018-0227; PermitPERMIT REPORT Fire Permit Print Date: 06/17/2021 Job Address: Permit Type: Parcel #: Valuation: Occupancy Group: #of Dwelling Units: Bedrooms: Bathrooms: Project Title: 2091 RUTHERFORD RD, # 150, CARLSBAD, CA 92008-7320 FIRE-Construction Commercial Work Class: Fire Sprinklers 2121202500 Track#: $143,018.25 Lot#: Project#: Plan #: Construction Type: Orig. Plan Check#: Plan Check #: (city of Carlsbad Permit No: FPC2018-0227 Status: Closed -Finaled Applied: 07/26/2018 Issued: 08/09/2018 Finaled Close Out: 06/17/2021 Inspector: Final Inspection: Description: LAIRD/ RF PRODUCTS INSTALL -INSTALL HIGH TEMPERATURE SPRINKLERS IN NEW TESTING OVEN (7 HEADS) Applicant: WESTERN FIRE PROTECTION INC MARIO MACK 13630 DANIELSON ST POWAY, CA 92064-6830 (858) 513-4949 FEE FIRE NFPA 13 or 13R System 7 -100 heads Total Fees: $536.00 Fire Department Total Payments To Date: $536.00 Balance Due: 1635 Faraday Avenue, Carlsbad CA 92008-7314 I 760-602-4665 I 760-602-8561 f I www.carlsbadca.gov AMOUNT $536.00 $0.00 Page 1 of 1 FIRE SPRINKLER CORPORATION DESCRIPTION AND OPERATION STANDARD RESPONSE AUTOMATIC SPRINKLERS GL SERIES UPRIGHT • PENDENT VERTICAL SIDEWALL HORIZONTAL SIDEWALL CONVENTIONAL (OLD STYLE) The Globe Standard Response Series GL-SR Sprinklers are a low profile yet durable design which utilizes a 5mm frangible glass ampule as the thermosensitive element. While the Standard Response Sprinkler provides an aesthetically pleasing appear- ance, it can be installed wherever standard spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and is available in various styles, orifices, temperature ratings and fin- ishes to meet varying design requirements. Standard Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe's Series GL-SR sprinkler proven actuat- ing assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. The sprinkler and escutcheon are not factory assembled. Assembly is done in the field. TECHNICAL DATA • See reverse side for Approvals and Specifications. • Temperature Ratings -135°F (57°C), 155°F (68°C), 175°F (79°C), 200°F (93°C), 286°F (141°C), 360°F (182°C) 500°F (260°C) Available Upon Request Without Approvals • Water Working Pressure Rating -175 psi (12 Bars) • Factory tested hydrostatically to 500 psi (34 Bars) • Maximum low temperature glass bulb rating is -67°F (-55°C) • Frame -bronze • Deflector -brass • Screw -brass • Lodgement Wire -stainless steel • Bulb seat -copper • Spring -nickel alloy • Seal -teflon • Bulb -glass with glycerin solution, 5mm size • Escutcheon Assembly -steel STANDARD RESPONSE SERIES GL-SR SERIES GL-SR/CNV UPRIGHT CONVENTIONAL STANDARD RESPONSE SERIES GL-SR SERIES GL-SR/SW PENDENT VERTICAL SIDEWALL STANDARD RESPONSE SERIES GL-SR/SW SERIES GL-SR/SW LPCB/CE HORIZONTAL HORIZONTAL SIDEWALL SIDEWALL •SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING MAR 2018 CLASSIFICATION ORDINARY INTERMEDIATE HIGH EXTRA HIGH ULTRAHIGH AVAILABLE SPRINKLER TEMPERATURES BULB COLOR ORANGE/RED YELLOW/GREEN BLUE MAUVE BLACK N.F.P.A. MAXIMUM CEILING TEMPERATURE GFS-100b (Formerly A-65) STANDARD RESPONSE AUTOMATIC SPRINKLERS SERIES GL-SR UPRIGHT· PENDENT • VERTICAL SIDEWALL HORIZONTAL SIDEWALL • CONVENTIONAL (OLD STYLE) SPECIF/CATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH' FINISHES 2.8 (40 metric) 1/2"NPT (15mm) 2 1/4" (5.7cm) Factory Bronze 4.2 (60 metric) 1/2"NPT (15mm) 2 114" (5.7cm) Chrome 5.6 (80 metric) 1/2"NPT (15mm) 2 114" (5.7cm) White Polyester' 8.0 (115 metric) 1/2"NPT (15mm) 2 1/4" (5.7cm) Black Polyester" 8.0 (115 metric) 3/4"NPT (20mm) 2 7/16" (6.2cm) Wax Coated'·" NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 'AVAILABLE AS cULus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. 'HORIZONTAL SIDEWALL IS 2 9/16". 'WAX COATING cULus LISTED UP TO 200"F (93"C) ONLY 'FINISHES AVAILABLE ON SPECIAL ORDER. LISTINGS/APPROVALS TEMPERATURE STYLE SIN K HAZARD' cULus FM LPCB' CE NYC· DOB FACTOR 135'F 155'F 175'F 200°F '"286"F "360°F MEA 101-92-E (57'C) (68°C) (79'C) (93°C) (141'C) (182'C) GL2861 2.8 LH X X X X X X X ---X GL4261 4.2 LH X X X X X X X ---X UPRIGHT GL5661 5.6 All X X X X X X X X X X X GL8161" 8.o· (½" NPT) All X X X X X X X ---X GL8164 8.0 All X X X X X X X X X X X GL2851 2.8 LH X X X X X X X ---X GL4251 4.2 LH X X X X X X X ---X PENDENT GL5651 5.6 All X X X X X X X X X X X Gl8151' 8.0' (½" NPT) All X X X X X X X ·---X Gl8156 8.0 All X X X X X X X x• X X X VERTICAL Gl5675 5.6 LH X X X X X X X X --- SIDEWALL' Gl8176 8.0 LH X X X X X X X ---- Gl2870§ 2.8 LH X X X X X X X ---X HORIZONTAL Gl4270§ 4.2 LH X X X X X X X --· -X SIDEWALL GL5670§ 5.6 LH/OH X X X X X X X X --· X GL5671D 5.6 LH/OH X X X X X X --X X - GL8171§ 8.0 LH/OH X X X X X X X ---- CONVENTIONAL GL5668 5.6 LH/OH X X X X X X --X X -(OLD STYLE) Gl8169 8.0 LH/OH X X X X X X ·---· X ·- 'SPRINKLERS SHALL BE LIMITED AS PER THE REQUIREMENTS OF NFPA 13 AND ANY OTHER RELATED DOCUMENTS. 1BRASS FINISH ONLY WHEN RECESSED -NO FM APPROVALS FOR RECESSED "NO FM APPROVALS §HORIZONTAL SIDEWALL cULus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING. FM APPROVED 4" TO 6" BELOW THE CEILING. alNSTALL IN ACCORDANCE TO BS5306 AND ANY OTHER RELATED DOCUMENTS. t PENDENT VERTICAL SIDEWALL cULus LISTED FDR 6' MIN. SPACING. t UPRIGHT VERTICAL SIDEWALL cULus LISTED FOR 9' MIN. SPACING. SOO"F (260'C) AVAILABLE UPON REQUEST WITH NO APPROVALS. '1/2"NPT: RETRO-FIT ONLY 'LPCB REF. NO 147c/04 ORDERING INFORMATION SPECIFY • Quantity • SIN• Style • Orifice • Thread Size • Temperature • Finish desired • Quantity -Wrenches/Recessed Wrenches • P/N 325390/325391 (1/2"); PIN 312366/325401 (l.O.) • Quantity Protective Caps• P/N 327109-CAP (Friction Fit Recessed) GL.BE FIRE SPRINKUR CORPORATION MAR 2018 OH: ORDINARY HAZARD LH: LIGHT HAZARD ALL: ALL HAZARDS GLOBE® PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 FAX 989-846-9231 1-800-248-0278 www.globesprinkler.com PRINTED U.S.A. GFS-100b (Formerly A-65)