Loading...
HomeMy WebLinkAbout1780 FAIRLEAD AVE; ; FPR2021-0056; PermitPERMIT REPORT Fire Permit Print Date: 11/18/2021 Job Address: 1780 FAIRLEAD AVE, CARLSBAD, CA 92011-3611 { City of Carlsbad Permit No: FPR2021-0056 Status: Closed -Finaled Permit Type: FIRE-Construction Residential Work Class: Multifamily Fire Alarm Parcel#: Valuation: Occupancy Group: #of Dwelling Units: Bedrooms: Bathrooms: Project Title: 2150220600 Track#: Applied: 05/04/2021 $0.00 Lot#: Issued: 09/09/2021 Project#: Finaled Close Out: 11/18/2021 Plan#: Construction Type: Orig. Plan Check#: Inspector: Plan Check#: Final Inspection: Description: VOSCANA -INSTALL DIGITAL CELLULAR COMMUNICATOR FOR CENTRAL STATION MONITORING OF THE EXISTING FIRE ALARM SYSTEM Applicant: BAY ALARM COMPANY DAN ANDERSON 8205 RONSON RD, # STE F SAN DIEGO, CA 92111-2014 (618) 718-0186 FEE FIRE Tl Fire Alarm System Total Fees: $620.00 Fire Department Total Payments To Date: $620.00 FPContractor: BAY ALARM COMPANY 8205 RONSON RD, # STE F SAN DIEGO, CA 92111-2014 (858) 586-3803 Balance Due: 1635 Faraday Avenue, Carlsbad CA 92008-7314 I 760-602-4665 I 760-602-8561 f I www.carlsbadca.gov AMOUNT $620.00 $0.00 Page 1 of 1 I. II. III. 8205 Ronson Rd. Ste F San Diego, CA 92111 (800) 4 70-1000 Contractor License # 880138 PROTECTED PREMISE SIERRA LINDA 1780 F AIRLEAD A VE CARLSBAD, CA 92011 MONITORING COMPANY Bay Alarm Company 5130 Commercial Circle Concord, CA 94520 800-4 70-1000 California Alarm Operating License Number: ACO28 EQUIPMENT SUPPLIER & INSTALLER 8205 Ronson Road, Suite F San Diego, CA 92111 1 (800) 4 70-1000 Contractor License# 880138 Honeywell Fire Alarm Communicators THE POWER OF CONNECTED HWF2-COM Series LTE /IP Single or Dual Path Commercial Fire Communicators The HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer Contact ID reporting with any FACP (fire alarm control panel) with a built-in dialer. Models include: • HWF2V-COM (Verizon LTE & IP) • HWF2A-COM (AT&T LTE & IP) Both models connect directly to the primary or secondary communication ports of a fire panel's digital alarm communicator transmitter (DACH Three selectable reporting paths include: LTE cellular only. IP only. or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the Alarm Net' network control center which routes highly encrypted. cybersecured Ethernet data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station. The AlarmNet' network control center is fully redundant and monitored 24/7. Installation and programming are easy through the Alarm Net 360' website. using the hand held 7720P Programming tool. or using the control panel's programming mode (for panels that support this option). FEATURES & BEf IEFIT~ • LTE and IP connection tested every day • Three selectable reporting paths: LTE cellular only IP only. or IP Primary with LTE cellular backup • Requires no change to the existing FACP configuration • Plan choices range from 5 minute. 60 minute, 6 hour. and 24 hour supervision intervals • Operates over the following communication protocols: LTE. HSPA+(4G) HSPA (3G) • Data transmits over standard Contact ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit) • Supports both dynamic CD HCP) or public and private Static IP addressing • Reliable connection: IP • Built-in. standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision • Diagnostic LEDs indicate signal strength and status • Connects directly to the primary and secondary telephone ports of a DACT • Works over any type of customer provided Ethernet 10/100 based network connection CLAN or WAN). DSL model or cable modem and cellularconnection • Choice of LTE provider tested every day services HFW2V-COM • QOS: Quality of Service diagnostics via Alarm Net conveys vital communicator information including signal strength. message path used. and when the message was received • 7720P Handheld programmer for easy setup The HWF2-COM LTE /IP fire communicators operate over the most modern and common cellular networks including LTE, 4G and3G. They connect to any customer provided Ethernet 10/100 base network connection (LAN or WAN). DSL or cable modem. Selectable reporting path feature allows the radios to be configured for a single or dual path. while providing appropriate supervision intervals based on NFPA 72 requirements. Selectable paths and supervision timing intervals include: SELECTABLE PATH DESCRIPTION SUPERVISION TIMES 2010 Cell Single path, cellular 5 Minutes 2010IP Single path, IP 5 Minutes 2010 IP&Cell Dual path, IP and cellular 24 Hours 2013 Cell Single path, cellular 60 Minutes 2013 IP Single path, IP 60 Minutes 2013 IP&Cell Dual path, IP and cellular 6 Hours Operation When an event occurs, the FACP goes off-hook to dial the central station. The HWF2-COM Series dialer capture module detects the offhook condition and provides the fire panel with a dial tone. When the fire panel detects the dial tone. it begins dialing the central station. After the dialing is completed, the dialer capture module returns a signal to the fire panel. The fire panel then sends the Contact ID reports to the dialer capture module. which in turn sends a signal after the report is successfully received from the fire panel. The dialer capture nodule sends the Contact ID reports to the HWF2-COM Series communications module. When all the reports are sent. the fire panel goes on-hook. The HWF2-COM Series communications module then transmits the messages to the central station either over the LTE network or the Internet (depending on configuration). Fire Communicator/ Panel Capability Tl1e HWF2-COM Series is compatible with fire alarm control panels that use the Contact ID communications format as described in the SIA DC-05 standard. Page 2 of 3 -DH-62010:A • 5/30/2019 Easy to Program The HWF2-COM communicator can be pre-programmed using the 7720P programmer to enter all central station information. This is saved to the HWF2-COM communicator panel memory. When the HWF2-COM is installed at the site and connected to the Internet/ Intranet. it registers with the AlarmNet Receiver. For most installations. the only required parameters are: • Primary City ID (two digits), obtained from your monitoring station • Primary Central Station ID (two digits), obtained from your monitoring station • Primary Subscriber ID (four digits). obtained from your monitoring station r • Communication ,Module MAC ID, and MAC CRC number located on the outside of the box and inside of the module All parameters are assigned by the monitoring station. AlarmNet AlarmNet communications technology provides a highly reliable alternative for the transmission of alarm signals. The network provides extensive coverage in the United States and Canada. The Alarm Net Network Control Center processes signals from powerful servers in multiple locations equipped with 24/7 infrastructure support. Redundant hardware servers. real-time backup databases. and generators with battery backup at all locations ensure continuity of service. Signals from Alarm Net are transmitted to central station receivers using multiple communication paths consisting of the Internet. LTE radio network. or toll free plain old telephone service (POTS). Visit Alarm Net.com to learn more. Installation Requirements, UL Compliance To meet UL864/NFPA requirements. ensure the following: • HWF2-COM Series must be installed in accordance with the National Fire Protection Association (NFPA) standards 70 and 72 • HWF2-COM Series must be mounted in the same room and within 20 feet of the fire panel. • HWF2-COM Series and all equipment used for the IP connection (e.g .. router. hub. modem. etc) must be UL-listed, powered from an unswitched branch circuit. and be provided with appropriate standby power. • HWF2-COM Series must use the 7 AH battery (not included) to provide 24 hour backup capability HWF2-COM Series Technical Specifications ELECTRICAL Transformer: Primary: 120VAC, 60Hz, 0.5A Secondary: 18VDC. SOVA Battery: One 12 V 7.0 AH lead-acid battery: (not supplied) Battery charging current: 1 Amp maximum Battery discharge current: Standby 230mA, Active 950mA CABINET SPECIFICATIONS Dimensions: 14.875" H x 12.75' W x 3.0" D (37.8cm H x 32.4cm W x 7.6cm D) Color: Red SHIPPING DIMENSIONS Weight: 5.3 lbs (6.94kg) Dimensions: 15.625" H x 13.79" W x 9.25" D (39.7cm H x 34.9cm W x 23.9cm D) TEMPERATURE AND HUMIDITY RANGES This system meets NFPA requirements for operation at 0 - 490C/32-1200F and at a relative humidity 93%+-2% RH (non-condensing at 32°C +-2°C(90°F +-3°F). However the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity Therefore. it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 -27°C/60-80°F. Honeywell Power Products 12 Clintonville Road Northford. CT 06472-1610 877.HPPPOWR www.honeywellpower.com PRODUCT LINE INFORMATION HWF2V-COM: L TE Digital Cellular Fire Alarm Communicator and Internet Panel, Verizon LTE / IP HWF2A-COM: LTE Digital Cellular Fire Alarm Communicator and Internet Panel. AT&T LTE / IP Both models include: Red cabinet with key and lock Wall outlet box Dialer capture module LTE communications module Antenna and mounting adapter PowerBoostl power supply LED display board Transformer Manual and required screws Cables, etc. ANTENNA AND EXTERNAL HARDWARE CELL-ANT3DB: 3dBA gain antenna WA7626-CA: SMA to N adapter cable 7626-S0HC: 50 ft. antenna cable, low loss Note for external installations: the WA 7626-CA adapter cable and 7626-SOHC antenna cable are only required when installing the CELL-ANT3DB antenna remotely. OTHER ACCESSORIES 7720P: HWF2-COM. HWF2A-COM and IPGSM-4G handheld programmer HPTCOVER: Plug-in transformer box for HWF2V-CO M. HWF2A-COM. and IPGSM-4G communicators BAT-1270: Battery 12 Volts, 7 AH , sealed AGENCY LISTINGS AND APPROVALS The listings and approva ls below apply to the HWV2-COM Series communicators. In some cases, certain modules may not be listed by certain approval agencies. or listing may be in process. Consult the factory for latest listings. UL Listed: S789 CSFM: 7300-1645:0511 FDNY: Approved DH-62010 I A I 05/19 1£ 2019 Honeywell International Inc Alarm Net and Alarm Net 360 are registered trademarks of Honeywell International Inc. ©2019 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to- date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Country of origin: USA Honeywell LISTING No. CATEGORY: LISTEE: DESIGN: RATING: INSTALLATION: MARKING: APPROVAL: CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE 7300-1645:0511 Page 1 of 1 7300 --FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES ADEMCO INC.2 Corporate Center Drive, Melville, NY 11747 Contact: Issa Khouryawad (516) 577-2312 Fax (516) 577-3540 Email: issa.khouryawad@Honeywell.com Models HWF2A-COM and HWF2V-Com Commercial Internet and L TE Communicator. The unit uses the Internet as its primary reporting path, and switches to cell service (secondary path as backup) when the Internet is not available. *The units are transmitters that captures DACT communication from a host panel and converts to IP and/or Cellular for transmission to the receiving station. Units also have the option for IP Only or Cellular only without a backup path. Refer to listee's product specification data sheets and installation, operation, and maintenance manual for detailed product description and operational considerations. Primary -120 VAC, 60 Hz Secondary -18 VAC, 5 VA In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. Listee's name, model number, electrical rating, and UL label. Listed as a control unit accessory for use with separately listed compatible commercial fire alarm control units. Refer to listee's installation Instruction Manual for details. *Rev 08-01-19 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: Authorized By: July 01, 2021 DAVID CASTILLO,, M.E., F.P.E. Fire Engineering Division Listing Expires June 30, 2022