HomeMy WebLinkAbout1923 CALLE BARCELONA; 145; AS110124; Permit7/21/22, 3:56 PM AS1 10124 Permit Data
City of Carlsbad
Sprinkler Permit
Permit No: AS110124
1923 CALLE
Job Address : Status: ISSUED
BARCELONA
Permit Type: SPRINK Applied 8/22/2011
Parcel No: 2550120400 Approved :
Lot#: 0
Reference No.: Issued:
PC#: Inspector:
Project Title: MAC COSMETICS T.I. SPRINKLERS
Applicant:
A & D FIRE SPRINKLERS, INC.
2ND FLOOR
11465 WOODSIDE AVE
SANTEE, CA 92071
619-448-1962
Fees($) Add'I Fees ($)
--
130 0
about:blank
Owner:
FOURTH QUARTER PROPERTIES XXX L L
C
C/O THOMAS TROPEA
45 ANSLEY DR
NEWNAN GA
Total($)
130
Balance($)
0
1/1
-.
MAC COSMETICS
FILE COPY
THE FORUM AT CARLSBAD
1923 CALLE BARCELONA, BLDG 3, SPC #145
CARLSBAD, CA 92009
FIRE SPRINKLER SUBMITTALS
MANUFACTURER DATA SHEETS
•• Materials of equal design, utility, and performance may be substituted for submitted materials so as to avoid delays in the
construction schedule and shall be deemed accepted by the Purchaser.
\lD\
Standard Spray; Upright, Pendent and Recessed Pendent
MODELS/S.I.N. V2703 AND V2707 STANDARD RESPONSE
MODELS/S.1.N. V2704 AND V2708 QUICK RESPONSE
These Model V27 standard spray sprinklers are designed to produce a
hemispherical spray pattern for standard commercial applications. They are
available with either standard or quick response bulbs. The design incorporates
state-of-the-art, heat responsive, frangible glass bulb design (standard or quick
response) for prompt, precise operation.
The die cast frame is more streamlined and attractive than traditional sand cast
frames. It is cast with a hex-shaped wrench boss to allow easy tightening from many
angles, reducing assembly effort. This sprinkler is available in various temperature
ratings (see chart on page 2) and finishes to meet many design requirements.
The recessed pendent should be utilized with a Model V27 recessed escutcheon
which provides up to ¾"/19 mm of adjustments.
I @
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS
UPRIGHT (V2703 AND
V2704)
PENDENT
(V2707 AND
V27D8)
RECESSED
PENDENT (V2707 AND
V2708)
SPRINKLER OPERATION The operating mechanism is a frangible glass bulb which contains a heat responsive liquid. During a
fire, the ambient temperature rises causing the liquid in the bulb to expand. When the ambient tem -
perature reaches the rated temperature of the sprinkler, the bulb shatters. As a result, the waterway
is cleared of all sealing parts and water is discharged towards the deflector. The deflector is designed
to distribute the water in a pattern that is most effective in controlling the fire.
COVERAGE For coverage area and sprinkler placement, refer to N FPA 13 standards.
TECHNICAL SPECIFICATIONS
Exaggerated for clarity
JOB/OWNER
System No. __________ _
Location ____________ _
www.victaulic.com
Models/S.I.N.: V2703, V2704, V2707, V2708
Style: Pendent, Upright or Recessed Pendent
Nominal Orifice Size: ½"/13mm
K-Factor: 5.6 lmp./8.1 S.1.A
Nominal Thread Size: ½" NPT/15 mm
Max. Working Pressure:
175 psi/1200 kPa FM Global
250 psi/1725 kPa UL
Factory Hydrostatic Test:
100%@ 500psi/3450kPa
Min. Operating Pressure: 7psi/48kPa
Temperature Rating: See charts on page 2 & 3.
MATERIAL SPECIFICATIONS
Upright Deflector: Bronze per U NS C22000
Pendent Deflector: Bronze per U NS C51000
Bulb: Glass with glycerin solution.
Bulb Nominal Diameter:
• Standard: 5.0mm
• Quick Response: 3.0mm
Load Screw: Bronze per U NS C65100
Pip Cap: Bronze per UNS C65100
Spring: Beryllium nickel
Seal: Teflon* tape
Frame: Die cast brass 65-30
Lodgement Spring: Stainless steel per UNS
S30200
CONTRACTOR
Submitted By _________ _
Date _____________ _
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAUUC COMPANY. C> 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
ACCESSORIES
Installation Wrench:
• Open End: V27
• Recessed: V27-2
Finishes:
• Plain brass
• Chrome plated
• White painted**
• Black painted**
• Custom painted**
• Proprietary nickel Teflon* coating**
For cabinets and other accessories refer to
separate sheet.
NOTE: Weather resistant recessed escutcheons
available upon request.
A For K-Factor when pressure is measured in
Bar, multiply S.I. units by 10.0.
* Teflon is a registered trademark of Dupont Co.
**UL Listed for corrosion resistance in all
configurations.
ENGINEER
Spec Sect ____ _ Para ___ _
Approved ___________ _
Date _____________ _
R
V27, K5.6
Standard Spray; Upright, Pendent and Recessed Pendent
MODELS/S.I.N. V2703 AND V2707 STANDARD RESPONSE
MODELS/S.I.N. V2704 AND V2708 QUICK RESPONSE
N·iiid·Wiiii·H·itif._
Orifice Sia (inches)
Orifice Sia (mm)
Nominal K Factor Imperial
Nominal K Factor S.I. A
Response
Deflector Type
Adjustment
½"
13
5.6
8.1
Standard
Upright
½"
13
5.6
8.1
Standard
Pendent
½"
13
5.6
8.1
Standard
Recessed
Pendent
upto¾"
Approvt d Tt rnp, r.tturt R 1t111g" F C llf A~t rH, Modt I
135"F/57"C 135"F/57"C
155"F/68"C 155"F/68"C 135"F/57'C
175"F/79"C 175"F/79"C 155"F/68"C
UL 200"F/93"C 200"F/93"C 175"F/79"C
286"F/141"C 286"F/141"C 200"F/93"C
360'F/182'C 360'F/l 82"C 286'F/141'C
135"F/57'C 135'F/57"C l 35'F/57'C 155'F/68'C 155'F/68'C 155'F/68'C
ULC 175'F/79'C 175'F/79'C 175"F/79'C 200'F/93"C 200"F/93'C 200"F/93'C 286'F/l 4 I 'C 286"F/14l'C 286'F/141'C 360'F/182'C 360'F/l 82'C
135'F/57'C 135'F/57'C
155'F/68'C 155'F/68'C 135'F/57'C
FM t 175'F/79'C 175'F/79'C 155'F/68'C
200'F/93'C 200'F/93'C 175'F/79'C
286'F/14l'C 286'F/141'C 200'F/93'C
360'F/182"C 360'F/182'C
135'F/57'C 135'F/57'C 135'F/57'C 155'F/68'C 155'F/68'C ISS'F/68'(
NYC/MEA t 62-99-E 175'F/79'C 175'F/79'C 175'F/79'C 200'F/93'C 200'F/93'C 200'F/93'C 286'F/141'C 286'F/141'C 286'F/141'C 360'F/182'C 360'F/182'C
135'F/57'C 135'F/57'C 135'F/57'C 155'F/68'C 155'F/68'C 155'F/68'C
CSFM t 7690-0531:112 175'F/79'C 175'F/79'C 175'F/79'C 200'F/93'C 200'F/93'C
286'F/141'C 286'F/141'C 200'F/93'C
360'F/182'C 360'F/182'C 286'F/141'C
135'F/57'C 135'F/57'C ISS'F/68'( 135'F/57'C 155'F/68'C
LPCB 175'F/79'C 175'F/79'C 175"F/79'C 200'F/93'C 200'F/93'C 200'F/93'C 286'F/141'C 286'F/141'C 360'F/182'C
135'F/57'C 135'F/57'C
ISS'F/68'( 155'F/68"C 135'F/57'C
VNIIPO 175'F/79'C 175'F/79'C 155'F/68'C
200'F/93'C 200'F/93'C 175'F/79'C
286'F/14l'C 286'F/141'C 200'F/93'C
360'F/182'C 360'F/182'C
ZSTZ ZSTX
CCC 155'F/68"C
200'F/93'C
155'F/68'C
200'F/93'C None
i Listings and Approvals as of printing. All are approved open, excepl for areas designated "No'.
• For K Factor when pressure is measured in Bar, multiply 5.1. units by 10.0
# FM Approved with 112· adjustment escutcheon only -quick response
www.victaulic.com
VICTAUUC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2010 VICTAUUC COMPANY. ALL RIGHTS RESERVED.
½"
13
5.6
8.1
Quick
Upright
135"F/57"C
155"F/68"C
175"F/79"C
200"F/93"C
286'F/141'C
135'F/57'C
155'F/68'C
175'F/79'C
200"F/93'C
286'F/14l'C
135"F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
286'F/14l'C
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
286'F/14l'C
135'F/57'C
ISS'F/68'(
175'F/79'C
200'F/93'C
286'F/141'C
135'F/57'C
175'F/79'C
200'F/93'C
135'F/57'C
155'F/68'C
175'F/79"C
200'F/93'C
286'F/141'C
K-ZSTZ
155'F/68'C
200'F/93'C
½"
13
5.6
8.1
Quick
Pendent
135"F/57"C
155"F/68"C
175"F/79"C
200"F/93"C
286'F/141°C
l 35"F/57'C
155"F/68"C
175'F/79"C
200'F/93'C
286'F/14l'C
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
286'F/14l'C
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
286'F/141 'C
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
286'F/141'C
None
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
286'F/141'C
K-ZSTX
155'F/68'C
200"F/93'C
40.10
½"
13
5.6
8.1
Quick
Recessed
Pendent
upto ¾·•
135"F/57"C
155"F/68"C
175"F/79"C
200'F/93"C
135'F/57"C
155'F/68'C
175'F/79'C
200'F/93'C
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
135'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
l 35'F/57'C
155'F/68'C
175'F/79'C
200'F/93'C
None
135'F/57'C
lSS'F/68'(
i75'F/79'C
200'F/93'C
None
~taul,d
,, t .. t K >\
V27, K5.6
Standard Spray; Upright, Pendent and Recessed Pendent
MODELS/S.I.N. V27O3 AND V27O7 STANDARD RESPONSE
MODELS/S.I.N. V27O4 AND V27O8 QUICK RESPONSE
40.10
RATINGS All glass bulbs are rated for temperatures from -67°F/-55°C to those shown in table below.
T, rnp, r II ,rt F C V1, t 1ullf ----------------
Sp11111<.lt r Tt 1np, r 1turt PI t Nr 1,11n 11 Ti rnp, r 1! irt r/1 u1rn1,rn Amlllt 11'
Cl t'>'>lhr 111011 l(h 11!il1r 1!1011 R.it111g Tt n1pt r 1turt Allow, d GI I'>'> Bu!li Colrir
Ordinary A 135
57
Ordinary C 155
68
Intermediate 175
79
Intermediate 200
93
High 286
141
Extra High* K 360
182
-* M Open
* Standard response only.
All are approved open, except for areas designated "No".
ORDERING INFORMATION
www.victaulic,com
~ 150/65 if wax coated.
Please specify the following when ordering:
Sprinkler Model Number
Style
Temperature Rating
K-Factor
Thread Size
Quantity
Sprinkler Finish
Escutcheon Finish
Wrench Model Number
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
100 Orange 38
100 Red 38
150 Yellow 65
150 Green 65
225 ~ Blue 107
300 Purple 149
No Bulb
~taul,c"
I '" .,~ J Al; 11J Al
V27, K5.6
Standard Spray; Upright, Pendent and Recessed Pendent
MODELS/S.I.N. V2703 AND V2707 STANDARD RESPONSE
MODELS/S.I.N. V2704 AND V2708 QUICK RESPONSE
WARNING
•
40.10
A WARNING
• Always read and understand installation, care, and maintenance
instructions, supplied with each box of sprinklers, before proceeding
with installation of any sprinklers.
• Always wear safety glasses and foot protection.
• Depressurize and drain the piping system before attempting to
install, remove, or adjust any Victaulic piping products.
• Installation rules, especially those governing obstruction, must be
strictly followed.
• Painting, plating, or any re-coating of sprinklers (other than that sup-
plied by Victaulic) is not allowed.
Failure to follow these instructions could result in serious personal
injury and/or property damage.
The owner is responsible for maintaining the fire protection system and
devices in proper operating condition. for minimum maintenance and
inspection requirements, refer to the current National Fire Protection
Association document NFPA 25 that describes care and maintenance
of sprinkler systems. In addition, the authority having jurisdiction may
have additional maintenance, testing, and inspection requirements that
must be followed.
If you need additional copies of this publication, or if you have any
questions about the safe installation of this product, contact Victaulic
World Headquarters: P.O. Box 31, Easton, Pennsylvania 18044-0031
USA, Telephone: 001-610-559-3300.
DIMENSIONS Standard Pendent -V2707, V2708 Standard Upright -V2703, V2704
1"/
25 mm
4TIW"1/
3l l'a!I\/
3Hla!n
~:::4I_~=-~
½" Adjustment Recessed -V2707, V2708 (drawing not to scale)
www.victaulic.com
,~·;
17mm
I I
\'Xii
43mm
2:V."/60mm Max. Hole
2"/51 mm Min Hole
l'llo"/
75mm
MAXIMUM EXTENSION
VICTAUUC IS A REGISTERED TRADEMARK OF VICTAUUC COMPANY. 0 2010 VICTAUUC COMPANY. ALL RIGHTS RESERVED. '\htaul,c'
Kt ~Kllf FkUlJ T "-u, IA
V27, K5.6
Standard Spray; Upright, Pendent and Recessed Pendent
MODELS/S.I.N. V2703 AND V2707 STANDARD RESPONSE
MODELS/S.I.N. V2704 AND V2708 QUICK RESPONSE
DIMENSIONS ¾" Adjustment Recessed -V2707, V2708 (drawing not to scale)
2lii"/60mm
Max.Hole
2"/51 mm
Min.Hole
40.10
L
37mm '¼"/
24mm 1Joi."/ 18mm 1--"'-r-'-........ ,--~--,-~=L__ULJ LJU__J~(-'--'CL.LJ-1
AVAILABLE WRENCHES
DISTRIBUTION PATTERNS
MAXIMUM EXTENSION
Spr111kltr l yp, V27 2 Rtct:c,c,uJ V2/ Opt:11 £11c1
V2707, V2708 Pendent yes yes
V2707, V2708 Recessed Pendent yes
V2703, V2704 Upright yes yes
Models/S.I.N. V2707, V2708
1y.•1
24mm
KS.6 standard pendent and recessed pendent distribution patterns -trajectory
www.victaulic.com
?psi
48 kPa
2'
0.6m
See notes on next page.
4'
1.2m
6'
1.Bm
15 psi
103 kPa
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. C 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
8'
2.4m
10'
3.0m
30 psi
207 kPa
12'
3.7m
14'
4.3m
~taul,c"
Standard Spray; Upright, Pendent and Recessed Pendent
MODELS/S.I.N. V2703 AND V2707 STANDARD RESPONSE
MODELS/S.I.N. V2704 AND V2708 QUICK RESPONSE
DISTRIBUTION PATTERNS
WARRANTY
NOTE
Models/S.I.N. V2703, V2704
K5.6 standard upright distribution patterns -trajectory
10' 3.omJ
B'
2.4m
6'
1.8m
4'
1.2m
2'
0.6m
NOTES:
2'
0.6m
7psi
48 kPa
4'
1.2m
6'
1.8m
15 psi
103 kPa
B'
2.4m
10'
3.0m
12'
3.7m
30 psi
207 kPa
1 Data shown is approximate and can vary due to differences in installation.
14'
4.3m
16'
4.9m
2 These graphs illustrate approximate trajectories, floor-wetting, and wall-wetting patterns for
these specific Victaulic Firelock automatic sprinklers. They are provided as information for
guidance in avoiding obstructions to sprinklers and should not be used as minimum sprinkler
spacing rules for installation. Refer to the appropriate NFPA National Fire Code or the authority
having jurisdiction for specific information regarding obstructions, spacing limitations and area
of coverage requirements. Failure to follow these guidelines could adversely affect the perfor-
mance of the sprinkler and will void all Listings, Approvals and Warranties.
3 All patterns are symmetrical to the centerline of the waterway.
Refer to the Warranty section of the current Price List or contact Victaulic for details.
This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be
installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the
right to change product specifications, designs and standard equipment without notice and without
incurring obligations.
For complete contact information, visit www.victaulic.com
~taulic' 40.10 2544 REV H UPDATED 07/2010
VICTAUUC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. C 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
Adjustable Concealed Standard Spray Pendent Standard and Quick Response
V3801 STANDARD RESPONSE
V3802 QUICK RESPONSE
This concealed, designer style sprinkler allows up to ½'/13mm adjustment to accommodate
concealment needs. The "standard" design provides a consistent hemispherical spray pattern.
The separate two-piece mounting cup/cover plate allows easy installation and testing prior to
ceiling installation. It also permits removal of suspended ceiling panels without system shut-
down. The design incorporates state-of-the-art, heat responsive, frangible glass bulb design
(standard or quick response) for prompt, precise operation.
This sprinkler is available in various temperature ratings (see chart on page 2) and finishes to
meet many design requirements.
@ <8>@ t'rJ !LPCB!((@
SEE VICTAULIC PUBLICATION 10.01 FOR OETAILS
V3801 ANO V3802
SPRINKLER OPERATION: The operating mechanism is a frangible glass bulb which contains a heat responsive liquid. During
COVERAGE:
TECHNICAL SPECIFICATIONS:
Exaggerared for clariry
JOB/OWNER
System No. __________ _
Location ___________ _
www.victaulic.com
a fire, the ambient temperature rises causing the liquid in the bulb to expand. When the ambient
temperature reaches the rated temperature of the sprinkler, the bulb shatters. As a result, the water-
way is cleared of all sealing parts and water is discharged towards the deflector. The deflector is
designed to distribute the water in a pattern that is most effective in controlling the fire.
For coverage area and sprinkler placement, refer to N FPA 13 standards.
Models: V3801, V3802
Style: Adjustable concealed, ordinary hazard,
light hazard
Nominal Orifice Size: ½'/13mm
K-factor: 5.6 lmp./8.1 S.I."
Nominal Thread Size: ½'/15mm
Max. Working Pressure: 175psi/1200kPa
Factory Hydrostatic Test: 100% @ 500 psi/
3450kPa
Min. Operating Pressure: 7psi/48kPa
Temperature Rating: See chart on page 2.
MATERIAL SPECIFICATIONS
Deflector: Bronze per U NS C22000
Cover Plate: Fusible solder
Bulb: Glass with glycerin solution.
Bulb Nominal Diameter:
• Standard: 5,0 mm
• Quick Response: 3,0 mm
Load Screw: Bronze per UNS C65100
Pip Cap: Bronze per UNS C65100
Spring: Stainless steel per UNS S30100
Seal: Teflon• tape
Frame: Die cast brass 65-30
Pins: Stainless steel per UNS S30400
Cup: Cold rolled steel, zinc chrome plated
Cover/Escutcheon: Brass per UNS C26000
Lodgement Spring: Stainless steel per UNS
S30200
Protective Cap: Polyethylene
CONTRACTOR
Submitted By _________ _
Date _____________ _
ACCESSORIES
Installation Wrench:
• Concealed: V38-4 or V38-5
Sprinkler Finishes:
• Plain brass (only)
Cover Finishes:
• Chrome plated
• White painted
• Flat black
• Custom painted
" For K-Factor when pressure is measured in
Bar, multiply S.I. units by 10.0.
• Teflon is a registered trademark of Dupont Co.
ENGINEER
Spec Sect ____ _ Para ____ _
Approved ___________ _
Date ____________ _
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2010 VICTAUUC COMPANY. ALL RIGHTS RESERVED. ~taul,c"
ht Pk It UI'< PR )D '<v [vlAf
V38, K5.6
Adjustable Concealed Standard Spray Pendent Standard and Quick Response
V38O1 STANDARD RESPONSE
V38O2 QUICK RESPONSE
Orifice Sia (inches)
Orifice Sia (mm)
Nominal K Factor Imperial
Nominal K factor S.I."
Response
Deflector Type
Adjustment
UL
FMI
NYC/MEA I 62-99-E
CSFM t 7690-0531,112
LPCB
VNIIPO
CCCI
# Recognized by FM as standard response only
½"
13
5.6
8.1
Standard
5mm bulb
Concealed
Pendent
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
135°F/57°C
155°F/68oC
175°F/79oC
200°F/93°C
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
155°F/68°C Sprinkler/138°F/59°C Cover
175°F/79°C Sprinkler/165°F/74°C Cover
200°F/93°C Sprinkler/165°F/74°C Cover
135°F/57°C
155°F/68°C
175°F/79°C
200°F/93°C
286°F/141°C
ZSTDY
155°F/68°C
t Listings and Approvals as of printing. All are approved open, except for areas designated "No"
• For K Factor when pressure is measured in Bar, multiply S.I. units by 10.0
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. 0 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
½"
13
5.6
8.1
Quick#
3mm bulb
Concealed
Pendent
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
155°Ft68°c,
175°F/79°C#
200°F/93°C#
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
40.50
155°F/68°C Sprinkler/138°F/59°C Cover
175°F/79°C Sprinkler/165°F/74°C Cover
200°F/93°C Sprinkler/165°F/74°C Cover
135°F/57°C
155°F/68°C
175°F/79oC
200°F/93°C
286°F/141°C
NONE
Kt 1-'RU It I UN 1-'KUUUL J AlJIUM,.lll ,-'t-<Nt\tti 40.50
V38, KS.6
Adjustable Concealed Standard Spray Pendent Standard and Quick Response
V3801 STANDARD RESPONSE
V3802 QUICK RESPONSE
RATINGS
ORDERING INFORMATION
WARNING
www.victaulic.com
All glass bulbs are rated for temperatures from -67°F/-55°C to those shown in table below.
Ordinary A 135 100 Orange A' 1350
57 38 57
Ordinary C 155 100 Red D* 165
68 38 74
Intermediate 175 150 Yellow 79 65
Intermediate 200 150 Green 93 65
*A For use with Standard or Quick Response Concealed Sprinkler 135°F/S?°C or lSS°F/68°C.
f D For use with Standard or Quick Response Concealed Sprinkler 175°F/79°C or 200°F/93°C.
Custom Finish -Customer to provide paint specification, allow 4 -6 weeks for samples.
0 138°F/S9°C per LPBC
Please specify the following when ordering:
Sprinkler Model Number
Style
Temperature Rating
K-Factor
Thread Size
Quantity
Cover Finish
Wrench Model Number
&WARNING
• Proper temperature rated cover must be used with the correct sprinkler rating per the
Temperature Chart Ratings.
• The plastic shipping cap must be removed for the sprinkler to operate properly.
100
38
150
65
• If shipping cap is replaced over an installed sprinkler for purposes of painting or plaster-
ing, then the fire protection system shall be considered out of service, the Authority Having
Jurisdiction notified, and a firewatch is suggested.
Failure to do so may result in failure of sprinkler to operate causing serious personal injury or
property damage.
VICTAULIC IS A REGISTERED TRADEMARK DF VICTAULIC COMPANY. C 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED. ~taulic"
UN Pk )[Jl.Jl I Al.JIL)M,..11 ,t-'t<I n H 40.50
V38, K5.6
Adjustable Concealed Standard Spray Pendent Standard and Quick Response
V3801 STANDARD RESPONSE
V3802 QUICK RESPONSE
WARNING A
•
www.victaulic.com
AWARNING
• Always read and understand installation, care, and maintenance
instructions, supplied with each box of sprinklers, before proceeding
with installation of any sprinklers.
• Always wear safety glasses and foot protection.
• Depressurize and drain the piping system before attempting to
install, remove, or adjust any Victaulic piping products.
• Installation rules, especially those governing obstruction, must be
strictly followed.
• Painting, plating, or any re-coating of sprinklers (other than that sup-
plied by Victaulic) is not allowed.
Failure to follow these instructions could result in serious personal
injury and/or property damage.
The owner is responsible for maintaining the fire protection system and
devices in proper operating condition. For minimum maintenance and
inspection requirements, refer to the current National Fire Protection
Association pamphlet that describes care and maintenance of sprinkler
systems. In addition, the authority having jurisdiction may have addi-
tional maintenance, testing, and inspection requirements that must be
followed.
If you need additional copies of this publication, or if you have any
questions about the safe installation of this product, contact Victaulic
World Headquarters: P.O. Box 31, Easton, Pennsylvania 18044-0031
USA, Telephone: 001-610-559-3300.
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. C 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
f kt 1-'KUlt I U f-'tWUU(.I AU uMA
V38, KS.6
Adjustable Concealed Standard Spray Pendent Standard and Quick Response
V3801 STANDARD RESPONSE
V3802 QUICK RESPONSE
DIMENSIONS Models V3801, V3802 (drawings not to scale)
MINIMUM EXTENSION
3~,/80 mm
½"/13 mm Adjustment
MAXIMUM EXTENSION
AVAILABLE WRENCHES
www.victaulic.com
VICTAUUC IS A REGISTERED TRADEMARK OF VICTAUUC COMPANY. 0 2010 VICTAUUC COMPANY. ALL RIGHTS RESERVED.
40.50
l½"/38mm
Typical Ceiling Tile
Finished Surface
2"/51 mm
Typical Ceiling Tile
Finished Surface
~taulid
Adjustable Concealed Standard Spray Pendent Standard and Quick Response
V3801 STANDARD RESPONSE
V3802 QUICK RESPONSE
DISTRIBUTION PATTERNS
WARRANTY
NOTE
Models V3801, V3802
KS.6 standard concealed pendent distribution patterns -trajectory
NOTES:
2'
0.6m
4'
1.2m
6'
1.8m
8'
2.4m
10'
3.0m
12'
3.7m
14'
4.3m
Data shown is approximate and can vary due to differences in installation.
2 These graphs illustrate approximate trajectories, floor-wetting, and wall-wetting patterns for
these specific Victaulic Firelock automatic sprinklers. They are provided as information for
guidance in avoiding obstructions to sprinklers and should not be used as minimum sprinkler
spacing rules for installation. Refer to the appropriate NFPA National Fire Code or the authority
having jurisdiction for specific information regarding obstructions, spacing limitations and area
of coverage requirements. Failure to follow these guidelines could adversely affect the perfor-
mance of the sprinkler and will void all Listings, Approvals and Warranties.
3 All patterns are symmetrical to the centerline of the waterway.
Refer to the Warranty section of the current Price List or contact Victaulic for details.
This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be
installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the
right to change product specifications, designs and standard equipment without notice and without
incurring obligations.
For complete contact information, visit www.victaulic.com
~taul,d 40.50 2558 REV L UPDATED 712010
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAUUC COMPANY. C 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.