HomeMy WebLinkAbout3617 JETTY PT; ; FA100007; Permit7/28/22, 3:14 PM FA100007 Permit Data
City of Carlsbad
Fire Alarm Permit
Job Address: 3617 JETTY PT
Permit Type: FALARM
Parcel No: 1680411806
Lot#: 0
Reference No.:
PC#:
Project Title: MYSTIC POINT
Applicant:
I _Fees($)
L 125
I Add'I Fees($)
0
about:blank
Permit No: FA 100007
Status: ISSUED
Applied 3/2/2010
Approved: 6/16/2010
Issued: 6/16/2010
Inspector:
Owner:
SHUCK TODD N&TRIESTA B
3617 JETTY PT
CARLSBAD CA
t-
Total($)
125
1/1
06-16-2010
Job Address:
Permit Type:
Parcel No:
3617 JETTY PT CBAD
FALARM
1680411806
City of Carlsbad
Fire Department Permit
Subtype: FALARM
Lot#: 0
Permit No: FA100007
Status:
Applied:
Issued:
Fire Dept Ref#: FA100007 Building Permit#: Entered By:
ISSUED
03/02/2010
06/16/2010
SSW
Location:
Project Title: MYSTIC POINT
Description:
Contractor:
CITY-WIDE ELECTRONIC SYSTEMS
PO BOX 2069
EL CAJON CA 92021
Phone: 619-444-0219
Fax:
# of Devices
Plan Check Fee
Total Fees:
Additional Plan Check Fee
Nuisance Alarm
Permit Fee
Additional Permit Fee
Re-Inspection Fee
Other
Additional Fees
TOTAL PERMIT FEES
Applicant/Contact:
Phone:
Fax:
$125.00 Total Payments To Date:
0
0
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$1 25.00
$0.00
$125.00
$0.00
NOTICE: Please take NOTICE that approval of your project includes the "Imposition' of fees, dedications, reservations, or other exactions hereafter collectively
referred to as 'fees/exactions.' You have 90 days from the date this permit was issued to protest imposition of these fees/exactions. If you protest them, you must
follow the protest procedures set forth in Government Code Section 66020(a), and file the protest and any other required information with the City Manager for
processing in accordance wtth Ca~sbad Municipal Code Section 3.32.030. Failure to timely follow that procedure will bar any subsequent legal action to attack,
review, set aside, void, or annul their imposition.
Electronic Systems Inc.
City of Carlsbad
Fire Prevention Division
1635 Faraday Ave.
Carlsbad, CA. 92008
February 26, 2010
Attention: Mr. Gregory Ryan & Mr. James Weigand
RE: Mystic Point
Carlsbad Village Dr. & College Blvd.
Carlsbad, CA
Enclosed you will find a submittal package prepared on the radio system that is to be installed to
replace the existing DACT at each building at the above mentioned location.
The installation of this system shall comply with Uniform Fire Code, 2007 Edition, : California
Code of Regulations, Title 24, 2007 Edition: and NFPA 72 2007 edition.
The installation of all fire alarm wiring and equipment shall be in accordance with NFPA 70, 760,
Fire Protective Signaling Systems, NEC.
If you have any questions concerning the design of or the devices to be installed in this system,
please telephone me at your earliest convenience. (619) 444-0219 ext 128.
Sincerely,
ITTED
+
I AES_DS7170 qxd 9/8/2009 2:47 PM Page 1
No MORE BOUNDARIES I ••l•it~
7170 MultiNet •~i!l!D!!3JJ.f!!et
RF/IP Receiver
Connects Multiple AES-lntelliNet Radio Networks
A major component of the AES-MultiNet Receiver System, the
7170 RF/IP Receiver connects AES-lntelliNet radio networks to
AES-MultiNet 7005i/ 7705i Servers, via the Internet. Adding
AES 7170 RF/IP Receivers allows central stations to monitor
one or more AES-MultiNet Radio networks from a single
location anywhere on the globe!
• UL Listed and NFPA-72 compliant
(2 -AES-7170 RF/IP Receivers required by UL)
• Operator-owned network
• No monthly fees
• Universally expandable
• Full data or discreet zoning
• Connect Multiple
AES-lntelliNet Networks
• Expand AES-lntelliNet
Wireless Network
Capacity
• Wireless-to-Internet
Alarm Transmission
• UL Listed
• NFPA-72 Compliant
UL Listings
UL 864 -Edition 9
UL 2050
UL 1610
UL 365
NFPA-72 Compliant
Wireless mesh networ1<ing is an
innovative technology adopted by
many industries with applications
that need to communicate data over
a large geographic area with a high
level of reliability at a low total cost
of ownership.
The advanced design and 2-way
communications capability provides
easy installation, expansion, and
management when compared to
alternative communication methods,
bOth wired and wireless.
+
+
I AES_DS7170.qxd 9/8/2009 2:47 PM Page 2
7170 RF/IP Receiver
• 7170 RF/IP Receiver -Collects AES-lntelliNet wireless alarm signals
and sends data via the network for transmission to the 7705i server.
-.,,,, .. ·T~., ... -,r~ .... :: 'T ......
......... ~ ........... ii ---. -----(.__ju t..~ Phone Line/ ,Phone Line/ ·
lnternel Internet
RF/IP Reciever antennas must be separated by a minimum of 200 feet.
No More Boundaries
• Multi-region fire and security wireless
Large regional users of
AES-lntelliNet networks
can use the
AES-MultiNet system to
increase coverage
RF/IP Link
Redundancy of AES-7170 RF/IP receivers is required for UL listings and
NFPA 72 compliance
AES-/nle//1NeI-1s the industry leader 1n delivering high quality wireless mes'l
networks to the fire and security industry in commerc1al, co·porate, governmen'.,
and educational applications with its broad line of products and advancec ne'.wo•k
management tools Users of AES-lntel/1Net networks have gained significant rev-
enue. communications and cost advantages while meeting the h•gh ste-idards of
rehab1hty required for the fire and security industry AES-lnte//1Net alarm monitoring
systems are deployed at hundreds of thousands of locatio-is ,n over i 30 cou-ihes
◄eAESllntelliNet
CORPORATION For Alarm Monitoring
For more information
Call 800-AES-NETS (800-237-6387)
AES Corporation 1285 Newbury Street I Peabody, MA 01960 USA
Tel. +1 978-535-7310 I Fax +1 978-535-7313 Email info@aes-intellinet com
Web www.aes-intellinet com
cb
Technical Specifications
Size
NEMA4 Weather-Tight Case
15" X 13" X 7"
Power Supply
110V
Ethernet Connection
RJ45
Connection -RJ 11
Telephone Line Connection
Battery Backup
12V 7.5 10A HR Battery
Weight
8.2 lbs, 3. 7Kgs
Operating Temperature
o· to 5o•c (32° to 122°F)
Network Connectivity
TCP/IP Network
RF Operating Frequency Options
UHF -400-512 MHz
VHF -150-174 MHz
Others Available
Cq,yrighl2009AESColpo<-.lion
l>E-Net ls a ,egitl-tr-11< d AES C~
7170/11107/R.
+
2.0 Safety Considerations:
The following items are safety related precautions that you should take into consideration
when installing your AES lntelliNet system. They are for your safety as well as others
and the safety of your equipment.
• Use caution when installing antennas to keep them away from electrical wires which
could cause serious injury or death if antenna makes contact with live wires.
• All equipment must be installed in accordance with National Electric Code,
a licable UL Standards and local buildin codes.
• Be certain to properly ground the antenna and surge suppressor to help dissipate
surges away from equipment and personnel. The grounding of the antenna and surge
suppressor is for your safety and the safety of your equipment and should not be
neglected.
3.0 Environmental Considerations:
The following environmental related suggestions are to help insure an installation that
will provide ou with a s stem that will o erate at its optimum Ion int
• The provided EMR Corp. Model 65610 Band Pass Cavity Filter is not supplied in a
weather ti ht enclosure and must be installed in a dry indoor environment.
• The provided -54 surge suppressor should be installed in a weather tight
enclosure such as a UL Listed NEMA4 enclosure.
4.0 Tee nical Specifications:
Listed below are the technical specifications for the 7170 IP-Link Transceiver.
• Electrical Input rating is 16.5 Volts AC at 40 VA.
-Use only provided Amseco Model XF-1640. For replacement Order AES PIN 1640
• DC Current Draw: 370mA standby, 900mA transmit
• 7 I 70 DC operating voltage
is 12 Volts nominal.
• Onboard Fuse; Self
Resetting/ Not User
Serviceable
• Rechargeable Gel Type
Battery Required:
12V, IOAH
• Low Battery Condition, AC
Fail and Charger Trouble
are reported to Central
Station.
Figure C -
Enclosure Dimensions
40-7 170 Revision 1.5a August J 0, 2009
1-2 5/8 +2 3/4 +2 5/8 "1
ro o o ol--.--
0
.~ AES llntelliNet
I lo o o ol-'
1-1----,:,,. ~
6
LISTING No:
CATEGORY:
LISTEE:
DESIGN:
RATING:
INSTALLATION:
MARKING:
APPROVAL:
CALIFORNIA DEPAR1MENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING -BillLDING MATERIALS LISTING PROGRAM
LISTING SER VICE
7300-1516:104
Misc. Devices/Control Unit Accessories
AES Corporation, 285 Newbury Street, Peabody, MA 01960
Contact: Thomas Kenty (978) 535-7310 Fax (978) 535-7313
Page 1 of 1
Model Multi-Net consisting of Model 7705i Central Receiver and Mode 7170
Transceiver Supervising Station Receiver. Suitable for Type 6 One-Wa1...y_....,...,,.t -e-r-se-rv~ice
when used with compatible Listed listee's Protected Premises transmitters as described in
the installation manual.
The Model Multi-Net System shall be installed with duplicate equipment as shown in the
manual for both fire alarm and burglar alarm service.
The Model 7705i is to be installed at the supervising station, in a controlled environment that
'has~ hours of ba~kup power. It must be mounted in a UL Listed (UOJZ) 19 in. rack and
must be used the following separately Listed equipment and connected as described in the
installation manual:
a) A UL Listed Printer
b) A UL Listed UPS and generator backup for a total of 24 hours standby power.
c) A UL497A Listed protector shall be installed between the Ethernet input and the
router.
The Model 7170 IP-Link is intended to be installed either at the supervising station or
Remotely located and must be connected as described in the installation manual. A UL497B
Listed protector shall be installed between the Ethernet input and the modem. To maimain ......
·antenna sapef\llslon, the Model 7170 IP-Link shall not be located within 20U ft. of a
subscnoer transmitter or another 7170. This includes antenna ca les and the IP-Link. The
subscribersancl1P-.LinRs can only use the rubber cluck antenna.
Refer to listee's data sheet for additional detailed product description and operational
considerations.
Model 7705i: 120 volts, 60 Hz, .6A
Model 7170 IP-Link: Primary Source 16.5 volts. 10Ah, 40VA
Secondary Source 12 volts, 10Ah
In accordance with listee's printed installation instructions, applicable codes and ordinances and
in a manner acceptable to the authority having jurisdiction, UL Standard 827 (Standard for
Central Station Alarm Services.
Listee's name, model designation, date of manufacture and UL label.
Listed as a one-way receiver unit for use with separately listed compatible central station fire
alarm control units.
05-16·2007 jw
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results
and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or
recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation
criteria. Refer · ' installation instructions and/or other suitable information sources.
Date Issued:
Authorized By: FRANCIS MA TEO, Program Coordinator
Fire Engineering Division
Listing Expires June 30, 2010
+
I AES_7744F 7788F qxd 8/24/2009 11 .04 AM Page 1
I .. ,,,,.
77 44F /77 88 F..: !f:!ll'ltl:t!l!t:Jet
RF Subscriber Unit
UL Fire, AA Burglary and NFPA-72 Compliant
UL Listed
UL Listed Central
Station
Remote Station
864 Ed. 9, 827, 1610,
365, 681
CSFM
NFPA
RF Section 8.6.3.5
Advanced Wireless Alarm Monitoring
The 7744F/7788F smart subscriber unit links an alarm panel to
an alarm monitoring central station. This 2-way transceiver and
repeater in one is housed in a full size locking steel cabinet for
superior performance. The 7744F/7788F supports a wide range
of inputs such as NO/NC/EOL and direct voltage. It automatically
senses wire and antenna cuts, and monitors battery and AC
power status. Advanced status reporting, self-diagnostics and a
built-in power supply make the 7744F/7788F the first choice for
all wireless alarm communication needs.
Full Data for Fire and Burglary
Use with the optional Firetap for full fire data or the lntelliTap for
full fire and burglary data.
Available Configurations
7744F -4 reversing
polarity inputs plus 4
programmable EOL inputs
7788F -Programmable EOL
inputs with 8 zones
Available Options
FireTap 7770
lntelliTap 7067
NEMA 4 Enclosure
High Gain Antenna
Additional Back Up Battery
Available in Burglary Beige
or Fire Red
• Options for Full Data for
Fire and Burglary
• Available in 7744F & 7788F
Zone Configurations
• Built-in Power Supply and
Battery Charger
• Local Annunciation
Options on Board
Wireless mesh networking is an
innovative technology adopted by
many industries with applications
that need to communicate dala over
a large geographic area with a high
level of reliability at a low total cost
of ownership.
The advanced design and 2-way
communications capabHity provides
easy installation, expansion, and
management when compared to
alternative communication methods,
both wired and wireless.
+
+
IAES_7744F 7788F.qxd 8/24/2009 11:04 AM Page 2 -----
Power Input
16.5 VAC, 40VA UL listed
Class II transformer required
Voltage
12 voe nominal
Current
175mA standby; 800mA transmit
Alarm Signal Inputs
• 4 individually programmable Zones:
NO/NC/EOL, trouble restore
• RS-232
• Reversing voltage (7744F only) 12
or 24 voe
Operating Temperature Range
o· to 5o•c , 32° to 122°F
Storage Temperature Range
-10° to 60°C, 14° to 140°F
Relative Humidity Range
0-85% RHC non-condensing
Back up Battery
12V, 7.5AHr
Low Battery Reporting
22.5-minute test cycle
7744F/7788F
Subscriber Unit
eports to central station after
approximately 60 minutes without AC
power, reports power restored after
approximately 60 minutes of restored
power. programmable from 60 to 180
orm '
Size
13.25"H x 8.5"W X 4.3"0
34cm x 21.5cm x 11cm
Weight
6.4 lbs, 2.9 Kilograms
(excluding battery)
Colors
Available in standard
Burglary Beige or Fire Red
Please specify when ordering
Available Options
• 7788F RF subscriber unit
with 8 EOL inputs
• 7744F RF subscriber unit with 4
EOL inputs and 4 reverse polarity
inputs
• 7770 -FireTap
• 7067 -lntelliTap
• NEMA 4 Enclosure
Please specify when ordering
AES-/nle//lNel 1s t'1e industry leader 1n delivering high quality wireless mesh
networks to the fire and security industry 1n commercial, corporate, government.
and educational applications with its broad hne of products and advanced network
management tools Users of AES-lntelllNet networks have gained significant revenue.
commun1cabons, and cost advantages while meeting the high standards of reliability
required for the fire and security industry AES-/nle//1Nel alarm monitoring systems are
deployed at hundreds of thousands of locations 1n over 130 countries
lntelliNet
For Alarm Monitoring
For more information
Call 800-AES-NETS (800-237-6387)
AES Corporation I 285 Newbury Street I Peabody, MA 01960 USA
Tel. +1 978-535-7310 I Fax +1 978-535-7313 I Email info@aes-1ntellinet.com
Web www.aes-intellinet com
Available configurations
• 7788F, 8 EOL inputs
• 7744F, 4 EOL inputs w/4
reverse polarity inputs
Ccpyriglll 2009AES C...,.,_,
,CS--••~-ofAES~
7744FmeeF/04/09
+
•
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE ST A TE FIRE MARSHAL
FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM
LISTING No:
CATEGORY:
LISTEE:
DESIGN:
RATING:
INSTALLATION:
MARKING:
APPROVAL:
LISTING SER VICE
7300-1516:108
Misc. Devices/Control Unit Accessories
AES Corporation, 285 Newbury Street, Peabody, MA 01960
Contact: Thomas Kenty (978) 535-7310 Fax (978) 535-7313
tkenty@aes-intellinet.com
Page 1 of 1
Model 7788 Subscriber Unit, RF transceiver. Unit is intended for use with listee's separately
listed Model lntelliNet 7705i system (7300-1516:104) and 7170-EM !Plinks, Remote
Transcievers (7300-1516:105). Refer to listee's data sheet for additional detailed product
description and operational considerations.
120 VAC, 16.5 VAC 40VA Secondary, 12 voe nominal
In accordance with listee's printed installation instructions, applicable codes and ordinances and
in a manner acceptable to the authority having jurisdiction.
Listee's name, model designation, and UL label.
Listed as a two-way transceiver unit for use with separately listed compatible fire alarm
control units.
03-26-2009 fm
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results
and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or
recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation
criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources.
Date Issued:
Authorized By:
JULY 9, 2009
FRANCIS MA TEO, Program Coordinator
Fire Engineering Division
Listing Expires June 30, 2010
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM
LISTING No.
CATEGORY:
LISTEE:
DESIGN:
RATING:
INSTALLATION:
MARKING:
APPROVAL:
LISTING SER VICE
7300-1516:106 Page 1 of 1
Misc. Devices/Control Unit Accessories
AES Corporation, 285 Newbury Street, Peabody, MA 01960
Contact: Thomas Kenty (978) 535-7310 Fax (978) 535-7313
tkenty@aes-intellinet.com
Models 7770 Serial Data Converter. This unit is supplemental add-on equipment for Model
7744 or 7788 RF subscriber unit. It takes contact ID information provided by the control
unit's RS-232 port connected to the RS-232 port of the 77 44 or 7788 unit. Refer to listee's
data sheet for additional detailed product description and operational considerations.
12VDC
In accordance with listee's printed installation instructions, applicable codes and ordinances,
and in a manner acceptable to the authority having jurisdiction.
Listee's name, model number, electrical rating, and UL label.
Listed as miscellaneous devices for use with separately listed compatible fire alarm control
units. Refer to listee's Installation Instruction Manual for details.
03-26-2009 fm
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results
and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or
recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation
criteria. Refer to listee's data sheet, installation instructions and/or other suitable information sources.
Dote Issued:
Authorized By:
JULY 9, 2009
FRANCIS MA TEO, Program Coordinator
Fire Engineering Division
Listing Expires June 30, 2010
@ Underwriters Laboratories Inc. ®
Northbrook, IL Sun Jo,a, CA
Melville, NY
A noHor•pront organization dedittled 10 public: .;;irvty
and commi11ed to q~all1y service
Applicant ID No: 731846-001
Service Center No 0
Expires; 31-MAR-2010
CERTIFICATE OF COMPLIANCE
THIS IS TO CERTIFY that the Alarm Service Company indicated below is included by Underwriters
Laboratories Inc. (UL) in its Product Directories as eligible to use the UL Listing Mark in connection with
Certificated Alarm Systems. The only evidence of compliance with UL's requirements is the issuance of a
UL Certificate for the Alarm System and the Certificate is current under Ul's Certificate Verification Service,
This Certificate does not apply in any way to the communication channel between the protected property and
any facility that monitors signals from the protected property unless the use of a UL listed or Classified Alarm
Transport Company is specified on the Certificate.
Listed Service From: POWAY, CA
Alarm Service Company: (731846-001)
CfNTRAL MONITORING CORP
SUITE 1-4
14231 GARDEN RD
POWAY CA 92064
Service Center: (731846-001)
CENTRAL MONITORING CORP
SUITE 1-4
14231 GARDEN RO
POWAY CA 92064
The Alarm Service Company Is Listed in the following Certlficate Service Categories:
Fil•· Vol No.
$2669-1
CCN
UUFX
Listing Category
[Signal and Fire Alann Equipment and Services] (Protective
Signaling Services) Central Station
*~THIS CERTIFICATE EXPIRES N 31-MAR-2010 .,....
"LOOK FOR THE UL ALARM SYST CE RT~,r"\TE"
C> 2008 UL Fo,m CS-CC
k LI;/_
Engineering Manager
01-APR-2009