Loading...
HomeMy WebLinkAbout2525 EL CAMINO REAL; ; FPC2018-0256; PermitPERMIT REPORT (Ccity of Carlsbad Print Date: 12/16/2021 Job Address: 2525 EL CAMINO REAL, CARLSBAD, CA 92008-1204 Permit Type: FIRE-Construction Commercial Work Class: Fire Alarm Parcel #: Track #: Valuation: $0.00 Lot #: Occupancy Group: Project #: #of Dwelling Units: Plan #: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check #: Plan Check #: Permit No: FPC2018-0256 Status: Closed - Finaled Applied: 08/01/2018 Issued: 08/23/2018 Finaled Close Out: 03/07/2019 Inspector: Final Inspection: Project Title: Description: THE SHOPPES AT CARLSBAD - OS&Y WIRELESS MONITORING FIRE ALARM SYSTEM -ADD TO EXISTING ALARM Applicant: FPContractor: JOHNSON CONTROLS FIRE PROTECTION LP JOHNSON CONTROLS FIRE PROTECTION LP DOUGLAS DANIELS P0 BOX 3042 3568 RUFFIN RD BOCA RATON, FL 33431-0942 SAN DIEGO, CA 92123-2597 (561) 341-7780 (858) 633-9123 FEE AMOUNT FIRE TI Fire Alarm System $601.00 Total Fees: $601.00 Total Payments To Date: $601.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 1 760-602-8561 f I www.carlsbadca.gov SimplexGrinnell LP 3568 Ruffin Road tqcci California 92123 ell ix1Ognnneii.com fl7CZo[ Fire Detection and Alarm System Product Submittal Project: OS&Y Wireless Monitoring The Shoppes at Carlsbad 2525 El Camino Real Carlsbad, CA For any questions regarding this submittal, please contact Douglas Daniels, 858- 633-9123 or douqlas.daniels(äici.com 7/30/2018 REV.#: 0 PROJECT Safer. Smarter. Tyco .TM SimpIexGrinnell LP 3568 Ruffin Road t1w1c1 SanCalifornia 2123 P 858-633-9100 SimplexGrInne/I 3-9101 IxneI!.com Fire Detection and Alarm System Products Qty Model No. Description C.S.F.M. No. I CP-3600 Wireless Control Panel 7165-2013:0114 1 345TS Wireless Monitor Module 7165-2013:0114 2 4090-9001 Supervised 1AM 7300-0026:0223 Business Information Warranty Information 7/30/2018 REV.#: 0 PROJECT Safer. Smarter. Tyco.TM / / FIRE ALARM CONTROL PANEL Overview The CP3600(+) is an intelligent Fire Alarm Control Panel suitable for any type occupancy regardless of size. The versatility, network integration, and scalability make this panel ideal for virtually any application. The CP-3600(+) will support up to 1024/2048 addressable devices and repeaters while providing true network operation and communication. Network operation includes wireless command signals to repeaters and wireless relays for activation of control functions such as appliance circuits, elevator recall. HVAC control and more. The CP3600(+) allows for the reporting of up to four separate alarm types and provides for event memory recall of alarm, supervisory and all control functions. Alarm and trouble signals are also wirelessly transmitted to remote annunciators. The CP3600(+) incorporates dual transceiver technology and utilizes Frequency Hopping Spread Spectrum (FHSS) signaling as well as reception protocols to assure the most secure and reliable fire alarm network available. The CP3600(+) meets all National Code Requirements and is UL Listed for Protected Premises, Remote Station, Central Station, Proprietary, Auxiliary Service, Manual. Waterflow and Sprinkler Supervisory. Features UL 864 10th Edition Listed 3600 offers 1024 / 3600+ offers 2048 device capability 4 Alarm Priority Types Bi-Directional RF Communication 900 MHz Frequency Hopping Spread Spectrum Format CRC Data Validation Supervisory Self-Restore Trouble Self-Restore 2-Device Alarm Zones Tandem Smoke Detector Control 24 or 60 Hour Battery Standby Time Field Selectable NAC Output (2-Class B or 1-Class A) 4 N.O. Alarm Dry Contact Outputs 2 Form C Programmable Dry Contact Alarm Outputs Programmable by zones rather than alarm types Form C Trouble Output Auxiliary Municipal City Box Output Time and Date with Daylight Savings Self Adjustment Device Enrollment Feature Test Mode Automatically Times out in 4 Hours Password and Key Lock Protected Non-volatile Memory - History of events for: 2000 Alarm/Supervisory Signals 2000 Trouble Signals 2000 Test Log Signals 4000 All Event Log Report Point Specific Fire Alarm Reporting Pinpoint Off-Site Annunciation SlA Format Event Reporting Supervised Dialer Interface Compatible with Keltron SDACT 2 Communicator Listings: Protected Premises, Remote Station ,Proprietarj. Central Station, Auxiliary Service, Automatic, Smoke Detector Monitor, Manual. Waterf low Sprinkler Supervisory 1500 software zones / 5 per device LISTED t1JC13 6600 Congress Ave / Boca Raton, FL 33487 / USA / +1-800-862-7513 / www.cwsifire.com Fire Protection Products Copyright© 2017 Tyco Fire Products LP. / All rights reserved. / Form No. TYENCWSI3O 1 DET (07/15) / / FIRE ALARM CONTROL PANEL Specifications Power Source: 120/24OVac 50/60Hz 1 Amp dedicated Battery Type: Two 12Vdc 4Ah Sealed Lead Acid Batteries Connected in Series for up to 24 Hours Standby Operation or two 12Vdc 7Ah Sealed Lead Acid Batteries Connected in Series for 60 Hours Standby Operation Special Application NACs: Programmable Non Power Limited. 1 Class "A" (Style Z) or 2 Class (Style Y) Field Selectable Class A Ratings: 24Vdc © 1 Amp Class B Ratings: 24Vdc @ 1 Amp Each Regulated NACs: Programmable Non-power Limited. 1 Class (Style Z) or 2 Class B (Style Y) Field Selectable Class A Ratings: 24Vdc © 100 Milliamps Class B Ratings: 24Vdc© 100 Milliamps Dry Contact Alarm Relays: 4 N.C. Common type Rated 24Vdc © 1 Amp. Resistive 2 Form C Programmable Rated 24Vdc © 1 Amp. Resistive Dry Contact Trouble Relays: 1 Form C Common type Rated 24Vdc © 1 Amp. Resistive Auxiliary Output: Current 350 ma. Max Coil Resistance 14.6 Ohms Transceiver Operating Frequency: 900 MHz Band * Antenna Type: Omni Enclosure: Powder Coated 16 Gauge Steel Testing: Follow the CP3500D CWSI Manual and NFPA 72 or Local Requirements Transmission: Complies to FCC Part 15 LISTED tllco 6600 Congress Ave / Boca Raton, FL 33487 ! USA / +1-800-862-7513 / www.cwsifire.com Fire Protection Products Copyright © 2017 Tyco Fire Products LP. / Al rights reserved. / Form No. TYENCWSI30 1 DEl (07/15) / MODEL 3451345TS FIRE TRANSMITTERS Overview The Model 345/345TS Fire Transmitters are addressable transmitters (monitoring modules) designed specifically for connection to initiating devices, sprinkler flow and supervisory switches, and other UL miscellaneous accessories with normally open contacts. The Model 345/345TS Fire Transmitters are UL Listed 864 Accessory Devices. In addition to the supervisory features such as low battery, tamper, and end of line violation, the Models 345/345TS offer the option of either Style 1 or Style 2 wiring configuration. Jumper selection enables it to either transmit a Trouble or Alarm signal on Contact Closure. When monitoring a trouble on a third party panel it will now be displayed as a Trouble instead of Supervisory. The Models 345/345TS Fire Transmitters utilize Frequency Hopping Spread Spectrum (FHSS) signaling technology and provide bi-directional system communication to assure a secure and reliable network. Both easy to install and cost effective, the low profile Model 345 incorporates a built in transmitter and is ideal for applications such as monitoring of flow and tamper switches, connection to existing hardwired panel outputs, PIV monitoring, and a host of other connections utilizing minimal wiring from the desired connection to the transmitter. The 345TS is available for installations requiring horizontal mounting. Specifications * Battery Type: 3 Volt Lithium Duracell DL1 23A or Panasonic CR1 23A Battery Life: 12 Months Minimum Battery Replacement: Upon Low Battery Report and/or During Annual Maintenance Testing: Follow the 345/345T5 CWSl Manual and NFPA 72 or Local Requirements Low Battery: 2.70 Volts Nominal Initial Loop Rating: 3Vdc, 1 m Transmission: Complies to FCC Part 15 Test Transmission: 200 Second Supervisory Polling Compatibility: With CWSI Control Panel, refer to Product Manual Features UL Listed 864 Accessory Device Selectable Style 1 or Style 2 Wiring Bi-Directional RF Communication Operates on a single 3V Lithium Battery Fully Supervised 900 MHz Band FHSS Transmission Format Remote Reset LISTED tICD 6600 Congress Ave / Boca Raton, FL 33487 / USA / +1-800-862-7513 / www.cwsifire.com Fire Protection Products Copyright © 2017 Tyco Fire Products LP. / All rights reserved. / Form No. TYENCWSI30 1 DET (07/15) CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7165-2013:0114 Page 1 of 2 CATEGORY: 7165-- FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE: COMMERCIAL WiRELESS SYSTEM INTERNATIONAL6600 Congress Avenue, Boca Raton, FL 33487 Contact: Robert Feltham (561) 912-6754 Fax (954) 318-6004 Email: robert.feltham@jci.com DESIGN: CWSI Model CP 3600 & CP 3600+ fire alarm control unit. Suitable for use as auxiliary, central station, local, proprietary, and remote system type applications. Control unit is a wireless system. NAC and auxiliary ouput are hardwired circuits. Initiating Devices communicate with the main control unit via wireless RF. System must be monitored by a supervising station with emergency response if the unit is programmed for CO T4 alarm signaling. Not evaluated for 12 hour CO Alarm Battery Standby Mode. CP-3600 supports up to 1024 wireless devices. CP-3600+ supports up to 2048 wireless devices. System consists of: CP-3600, CP-3600+ control unit 345+ transmitter SR-5+ wireless relay AR-5+ NAC extender/repeater 5104B+ Dialer SDACT Dialer RB relay box WRA annunciator TR EOL resistor Refer to listee's data sheet for detailed product description and operational considerations. RATING: Primary: 120 V, 50/60 Hz, IA 240 V, 50/60 Hz, 1A Supervised Secondary: 24 Vdc nominal 164 mA maximum battery charge current 7 Ah maximum battery capacity 6-8-16 dc This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct RV' operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing No. 7165-2013:0114 Page 2 of 2 Supervised RF signal to noise ratio: Minimum signal - 100.2 dBM Maximum noise - 115.3 dBM INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, type of unit, type of signaling, electrical rating and UL label. APPROVAL: Listed as fire alarm control panel for use with separately listed compatible initiating and indicating devices. Refer to manufacturer's Installation Manual for details. Approved for indoor use only. 6-8-16 dc This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct RV& operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division £L5implEx UL, ULC, CSFM Listed; FM Approved; MEA (NYC) Acceptance* IDNet or MAPNET II addressable communications supply both data and power over a single wire pair to provide**: Supervised Class B monitoring of normally open, dry contacts Total wiring distance from JAM to supervision resistor(s) of up to 500 ft (152 m) Monitored connection is compatible with Simplex® 2081-9044 Overvoltage Protectors for outdoor wiring or electrically noisy applications For use in indoor locations up to 158° F (70° C) such as attic spaces or similar applications For use with following Simplex control panels: Model Series 4007ES, 4008, 4010, 4010ES, and 4100ES fire alarm control panels for IDNet communications Model Series 4100/4100U/4100ES, 4120, 4020, and 2120 Communicating Device Transponders (CDTs) equipped with MAPNET II communications Model 4090-9001: Enclosed design minimizes dust infiltration Mounts in standard single gang electrical box Screw terminals for wiring connections Visible LED flashes to indicate communications Optional covers are available to allow LED to be viewed after installation (requires mounting bracket, ordered separately) Model 4090-9051: Encapsulated design for extended exposure to high humidity (LED is not present on this model) Color coded 18 AWG leads for wiring IDNet communications provides current limited monitoring: Provides monitoring of tamper switch (supervisory) and waterfiow switch (alarm) on same circuit using one point Available with IDNet communications only Multiple operation modes are available and are selectable at the control panel: Contact closure status can be tracked Momentary contact closure conditions can be selected at the panel to be latched or tracked (not available with the 2120 CDT) UL listed to Standard 864 * These products have been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:223 for allowable values and/or conditions concerning material presented in this document. Accepted for use - City of New York Department of Buildings - MEA35-93E. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. Multi-Application Peripherals IDNet and MAPNET II Communicating Devices, Individual Addressable Modules (lAMs) 4090-9001 Supervised lAM (shown approximately 3/4 size) 4090-9051 Supervised lAM (shown approximately 3/4 size) Dts ri ntir Individual addressable modules (lAMs) receive both power and communications from a two-wire MAPNET II or IDNet circuit. They provide location specific addressability to a single initiating device (such as single station smoke detector alarm contacts or heat detector contacts) or multiple devices at the same location by monitoring normally open dry contacts and the wiring to an end-of-line resistor. Model 4090-9001 is packaged in a thermoplastic housing and provides screw terminal connections and a status indicating LED. Model 4090-9051 is an encapsulated package with wire leads. It does not provide a status indicating LED. S4090-0001-11 11/2014 Contact Closure. Closure of the monitored contact(s) initiates an alarm or other response as programmed at the fire alarm control panel. An open in the monitored circuit wiring will cause a trouble to be reported. Panel Selections. Selections can be made at the control panel to maintain the alarm condition if the initiating device contacts are momentary, such as from a rate-of-rise heat detector, or to track the device contact status (not available with the 2120 CDT). ['i,ii iii umtr. Iii o1]17 M TWAT, M For use with IDNet communications only, these JAMs can provide quad-state sensing of normal, open circuit, short circuit, and current limited conditions. (Program type is "T-sense.") With the proper end-of-line and current limiting resistors, dual functions such as tamper switch and waterfiow switch monitoring can be determined and communicated by a single addressable point. lAM Product Selection Model Description 4090-9001 Supervised lAM, mounted in thermoplastic housing with screw terminals; see applicable options below 4090-9051 1 Supervised AM, encapsulated with wire leads Optional Trim Plates and Mounting Bracket for Model 4090-9001 Model Description 4090-9806 For semi-flush mounted box Trim plate with LED viewing window, requires 4090-9810 mounting bracket, 4090-9807 For surface mounted box includes mounting screws; galvanized steel 4090-9810 Mounting bracket, mounts lAM to electrical box and provides screw holes for trim plate, required for optional trim plates End-of-Line Resistor Harnesses (ordered separately as required) Model Reference No Description 4081-9004 733-886 6.8 k, 1/2W; Standard end-of-line resistor harness for NO. contact supervision 4081-9003 733-896 4.7 kc, 1/2W Use for current limited monitoring applications 4081 -9005 733-984 1.8 kc), 1/2W Specifications Electrical Power and Communications MAPNET II or IDNet, auto selected, 1 address per lAM Input Requirements Normally open, dry contacts 4090-9001 Wire Connections - 4090-9051 Screw terminals for in/out wiring, 18 to 14 AWG wire (0.82 mm2 to 2.08 mm2) Color coded wire leads, 18 AWG (0.82 mm2), 8" long (203 mm) Installation Instructions Reference Documents Field Wiring Diagrams 574-331 for 4090-9001; 579-572 for 4090-9151 842-073 for IDNet operation; 841-804 for MAPNET II operation Wiring Distances Distance from lAM to Contacts 500 ft (152 m) maximum without protectors 400 ft (122 m) maximum with 2081-9044 Overvoltage Protectors Wiring Distance Reference per channel, MAPNET II or 1 2500 ft (762 m) maximum from fire alarm control panel IDNet Communications 10,000 ft (3048 m) maximum total wiring distance (including T-Taps) Mechanical Dimensions 4090-9001 4090-9051 1-9/16" W x 1-3/4" H xl-1/4"D(40mmx44mmx32mm) 1-9/16" W 1-9/16" H x 9/16" D (40 mm x 40 mm x 14 mm) Housing Material, 4090-9001 Black thermoplastic Encapsulation Material, 4090-9051 Epoxy, beige Temperature Range 32° to 158° F (0° to 70° C); intended for indoor operation Humidity Range Up to 93% RH at 100° F (38° C) 2 S4090-0001-11 11/2014 Mounting Information 4090-9001 IDNet Field wiring shown supervised lAM for reference LED viewing port uir.. Single gang electrical box 2-1/2' (64mm) minimum depth (supplied by others) Address setting under resealable label Single gang blank cover plate and mounting screws, for use when LED is not required to be externally viewed (supplied by others) Mounting Reference, Single Gang Blank Cover Plate 4-1/4" (108 mm) c Light pipe for © LED viewing 4-1/2" 1 (114 mm) 9ISCON)ECT POER DISCONEO1 PONER BEFORE SERVICING J [BEFORE SE?VCING © © 2-1/2" __ (64 mm) 4090-9806, Trim plate for semi-flush mounted box 2-13/16" _ (72 mm) 110 4090-9807, Trim plate for surface mounted box 4090-9810 Mounting bracket, ordered separately NOTE: These mounting plates require mounting bracket 4090-9810. Optional Trim Plates and Mounting Bracket for Visible LED 2 S4090-0001-11 11/2014 4090-9051 Mounting Information Address setting is at rear of housing 4090-9051 Encapsulated Supervised lAM 01 Single gang electrical box 2-1/2 (64mm) minimum depth (supplied by others) Single gang blank cover plate and mounting screws (supplied by others) i rfl p1 EX Tyco Fire Protection Products - Westminster, MA '01441-0001 • USA S4090-0001-11 11/2014 0 2014 Tyco Fire Protection Products. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice. CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-0026:0223 Page 1 of I CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: Simplexloo Simplex Drive, Westminster, MA 01441-0001 Contact: Jim Goyette (978) 731-8580 Fax (978) 731-8881 Email: james.goyette@jci.com DESIGN: Models* 4090-9001, -9001TSP, -9001TTP, and -9051 Supervised lAM Monitor Module; 4090-9002, -9002TSP, and -9002TTP lAM Relay Module; 4090-9106, -9I06TSP, and-9106TTP Class "A" 7AM Initiating Module; 4090-9101, -9101TSP, and -9101TTP Class "B" ZAM Initiating Module; and 2190-9173 Two-Point I/O Module. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 24 VDC 30 VDC for Models 4090-9002 series INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed compatible fire alarm control units. For indoor use only. Refer to listee's Installation Instruction Manual for details. NOTE: *Rece 03-29-2006 jw This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Contractor's License Detail for License # 986047 DISCLAIMER: A license status check provides information taken from the CSLB license database. Before relying on this information, you should be aware of the following limitations. CSLB complaint disclosure is restricted by law (B&P 7124.6) If this entity is subject to public complaint disclosure, a link for complaint disclosure will appear below. Click on the link or button to obtain complaint and/or legal action information. Per B&P 7071.17 only construction related civil judgments reported to the CSLB are disclosed. Arbitrations are not listed unless the contractor fails to comply with the terms of the arbitration. Due to workload, there may be relevant information that has not yet been entered onto the Board's license database. Business Information JOHNSON CONTROLS FIRE PROTECTION LP P 0 BOX 3042 BOCA RATON, FL 33431 Business Phone Number:(562) 405-3800 Entity Partnership Issue Date 08/14/2013 Expire Date 08/31/2019 License Status This license is current and active. All information below should be reviewed. Classifications C10 - ELECTRICAL C16 - FIRE PROTECTION CONTRACTOR Bonding Information Contractor's Bond This license filed a Contractors Bond with FEDERAL INSURANCE COMPANY. Bond Number: 82332032 Bond Amount: $15,000 Effective Date: 01/01/2016 Contractor's Bond History Bond of Qualifying Individual This license filed Bond of Qualifying Individual number 82332031 for RONALD GILBERT MAYLE in the amount of $12,500 with FEDERAL INSURANCE COMPANY. Effective Date: 08/13/2013 This license filed Bond of Qualifying Individual number 82332035 for TIMOTHY PAUL ROSTEN in the amount of $12,500 with FEDERAL INSURANCE COMPANY. Effective Date: 08/13/2013 Workers' Compensation This license has workers compensation insurance with the OLD REPUBLIC INSURANCE COMPANY Policy Number:MWC310893 Effective Date: 10/01/2017 lExpire Date: 10/01/2018 Other Personnel listed on this license (current or disassociated) are listed on other licenses.