Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
5823 NEWTON DR; ; FPC2018-0128; Permit
4ity of PERMIT REPORT Carlsbad Print Date: 12/16/2021 Job Address: 5823 NEWTON DR, CARLSBAD, CA 92008-7361 Permit Type: FIRE-Construction Commercial Work Class: Fire Sprinklers Parcel #: Track #: Valuation: $0.00 Lot #: Occupancy Group: Project #: #of Dwelling Units: Plan #: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check #: Plan Check #: Project Title: Description: THERMO FISHER BLDG 5823 -PHASE 3 TOWN HALL - FIRE SPRINKLER TI (66 HEADS) Permit No: FPC2018-0128 Status: Closed - Finaled Applied: 05/03/2018 Issued: 05/18/2018 Finaled Close Out: 02/04/2021 Inspector: Final Inspection: FPContractor: MILLENNIUM FIRE PROTECTION CORP - INACTIVE 2950 SAN LUIS REV RD OCEANSIDE, CA 92058-1241 (760) 722-2722 FEE AMOUNT FIRE NFPA 13 or 13R System 7 - 100 heads - $536.00 Total Fees: $536.00 Total Payments To Date: $536.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 1 760-602-8561 f I www.carlsbadca.gov it= I MILLENNIUM FIRE PROTECTION CORP. RECEIVED MAY 032018 CARLSBAD FIRE DEPARTMENT rjr Th ermo-Fish er Newton Buil ding 5823 - Phase 3 Town Hall Overhead Fire Sprinkler Material Submittal 5-3-2018 Table of Contents I OVERHEAD PIPE FITTINGS ] Thermo Fisher Newton Building Phase 3 Town Hall 70 51 2 21/2 3 4 FM Approved and UL Listed Sprinkler Pipe Bull Moose Tube Company is a recognized producer of quality pipe products. Our Schedule 10 and Schedule 40 are FM Approved and UL Listed (for U.S. and Canada), even though these products do not require separate approvals and listings. Bull Moose Tube made the decision to have them approved and listed for your peace of mind. Our Sch. 10 and Sch. 40 have been through the same rigorous testing as our other fine pipe products. Bull Moose Tube's Sch. 10 and Sch. 40 pipes are made to ASTM A135 and ASTM A795. These products are typically supplied with our protective coating but can be supplied without the coating so they can be hot-dip galvanized to meet FM requirements for use in dry systems in accordance with the zinc coating specifications of ASTM A795 or ASTM A53. 4 H 1.097 . 1.41 lbs/ft 777 91 - 1.442 1.81 lbs/ft 61 1.682 2.09 lbs/ft 61 2.157 . 2.64 lbs/ft 2.635 3.53 lbs/ft 30 3.260 4.34 lbs/ft 19 4.260 5.62 lbs/ft 19 Schedule 40 Pipe 1t 4 1 315 1.049 1.68 lbs/ft 1.660 1 380 2.27 lbs/ft 1.900 1.610 2.72 lbs/ft 2.375 2.067 3.66 lbs/ft 30 2.875 L 2.468 5.80 lbs/ft 30 3.500 3.068 7.58 lbs/ft 19 4.500 4.026 10.80 lbs/ft 19 PIPE PREPARATION For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's instructions for the specific fitting used. 1819 Clarkson Road (N 6 For additional information, A, C @ us Ajk Chesterfield, MO 63017 contact your salesperson (800) 325-4467 BULL. MOOSE TLE COI ANY FAX: (636) 537-2645 today at (800) 325-4467 or (636) 537-2600 in the USA, USTED www.bullmoosetube.com or from Canada ______ ACRFAROcompany e-mail: sa1es(bu11moosetube.corn call (800) 882-4666 APPROVED All information contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation. 7/09 tqCU /Fire & Building I Products Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 Grinnell Grooved Fire Protection Products Fire Protection Submittal Sheet Listing and Approval Information Page 1 of 8 MARCH 2011 TFPI800 Page 2 of 8 TFPI800 Figure Nominal Size Inches Nominal Size mm 11/4,11/2,2 Pipe Schedule Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) O Figure 705 42.4,48.3,60.3 Sch 5,ID,WST 175 175 175 - - 11/4, 11/2, 2,21/2 42.4,48.3,60.3,73.0 Sch 10, Sch 40 300 300 300 - - 3,4,5,6,8 88.9, 114.3,141.3,168.3,219.1 Sch 10, Sch 40 300 300 300 - - 10,12 273.0, 323.9 Sch 10, Sch 40 250 250 250 - - l'I, 11/2,2, 21/2, 3 42.4, 48.3, 60.3, 73.0, 88.9 MF 300 300 300 - 7- 4 114.3 MF - - 300 - - 11/4,11/2,2,21/2,3,4 42.4,48.3,60.3, 73.0, 88.9,114.3 OF 300 300 300 - - 11/4, 11/2,2,21/2,3,4 42.4,48.3,60.3,73.0,88.9, 114.3 FLF 300 300 - - - 1V2, 2,21/2,3,4 48.3,60.3,73.0,88.9,114.3 FF 300 300 300 - - 1, 11I4, 11/2,2 33.7,42.4,48.3,60.3 MIT, EZr 300 300 300 - - 3 88.9 EZ 300 300 300 - - 4 114.3 EZ 250 250 300 - - 6 168.3 EZ 250 250 175 - - 1 '14, 1'/2, 2 42.4,48.3,60.3 BLT, DT, TL, Gal 7, Gal Flo 300 300 300 - - 1/4,11/2,2 42.4,48.3,60.3 GL, MLT, MT, SL, WLS 300 300 - - - 11/4,11/2,2 42.4,48.3,60.3 UE - - 175 - 76.1, 165.1 BS1387 300 300 300 - - 42.4,48.3, 60.3, 76.1, 88.9,114.3 BS1387, ISO 4200 - - - 16 20 139.7 BS1387, ISO 4200 - - - 16 - 165.1 B51387, ISO 4200 - - - - 20 168.3,219.1 1S04200 - - - 16 20 108.0, 133.0,159.0 ISO 4200 300 - 300 - - 216.3 AS 63452 300 - 300 - - - - O Figure 707 11/2,2,21/2 48.3,60.3,73.0 Sch 5, UE,WST 175 175 175 - - 11/2,2,21/2,3,4,5 48.3,E3,73.0,88.9,114.3,141.3 Sch 10 450 450 450 - - 6,8,10,12 168.3, 219.1, 273.0, 323.9 Sch 10 450 450 450 - - 11/2,2,21/2,3,4,5 48.3,60.3,73.0,88.9,114.3, 141.3 Sch 40 500 500 500 - - 6,8,10,12 168.3, 219.1, 273.0, 323.9 Sch 40 500 500 500 - - 1V2,2,21/2,3,4 48.3,60.3,73.0,88.9,114.3 MF, DF, FF, SF, STF 300 300 300 - - 2 60.3 EZT 300 - - - - 3 88.9 EZ 300 300 300 - - 4 1 1/2, 2,21/2,3 1143 EZ 250 250 300 6 168.3 EZ 250 250 175 - - 48.3,60.3,73.0, 88.9 XL 300 300 300 - - 11/2,2 48.3,60.3 GL, MI, MLT,TL 300 300 300 - - 11/2, 2 48.3, 60.3 Gal 7, Gal Flo 300 300 300 - - 11/2, 2 48.3,60.3 BIT, DI - - 300 - - 14,16 355.6, 406.4 Sch 30 300 - - - - 18,20 457.2, 508.0 Sch 30 200 - - - - 24 610.0 Sch 20 250 - - - - 76.1, 165.1 B51387, ISO 4200 300 - 300 - 20 48.3,60.3,88.9,114.3,168.3 B51387, ISO 4200 - - - - 20 219.1, 273.0,323.9 ISO 4200 - - - 16 20 O Figure 71 2 60.3 Sch 5,ID,UE,WST 175 175 175 - - 2,21h, 3,4,5 60.3,73.0, 88.9, 114.3,141.3 Sch 10, Sch 40 250 250 250 - - 6,8 168.3,219.1 Sch 10, Sch 40 250 1 250 250 - - 10,12 273.0, 323.9 Sch 40 250 250 250 - - 2 60.3 BIT, DI, EZ I Fr, GL, LS 250 250 250 - - 2 60.3 MT, M LT, TL, WLS,XL 250 250 250 - - 2 60.3 Gal 7, Gal Flo 250 250 250 - - 2 60.3 MF, FF - - 250 - - 2,21h, 3,4 60.3, 73.0,88.9, 114.3 OF, FF, MF, SF 250 250 250 - - 3,4 88.9,114.3 EZ 250 250 250 - - 6 168.3 EZ 250 250 175 - - 2,3,4 60.3, 88.9,114.3 SIF 250 250 250 - - 21/2, 3 73.0,88.9 XL 250 250 250 - - Figure 71 PN16 60.3, 76.1, 88.9,114.3,168.3 BS1387, ISO 4200 250 - 250 16 20 139.7 8S1387, ISO 4200 250 - 250 16 - 165.1 BS1387, ISO 4200 250 - 250 - 20 219.1, 273.0 1S04200 250 - 250 - 20 323.9 ISO 4200 250 - 250 - 16 TFPI 800 Page 3 of 8 Figure Nominal Size Inches Nominal Size mm Pipe Schedule Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) U O Figure 772 Patented 11/4,11/2,2 42.4,48.3,60.3 Sch 5, ID, IJE,WST 175 175 175 - - 11/4 42.4 Sch 10, Sch 40 300 300 300 - - 11/2,2,21/2,3,4 48.3,60.3,73.0,88.9,114.3 Sch 10, Sch 40 500 500 500 - - 5.6 141.3,168.3 Sch 10 300 300 300 - - 8 219.1 Sch 10 400 400 400 - - 5 141.3 Sch 40 300 300 300 - - 6 168.3 Sch 40 400 400 400 - - 8 219.1 Sch 40 450 450 450 - - 10,12 273,0,323.9 Sch lo, Sch 40 250 250 250 - - 11/4,11/,,2,21/2,3 42.4,48.3,60.3,73.0,88.9 MF 300 300 300 - - 4 114.3 EZ, MF 250 250 300 - - 3 88.9 EZ 300 300 300 - - 6 168.3 EZ 250 250 300 - - 11/2,2, 2/2, 3,4 48.3,60.3,73.0,88.9,114.3 OF, SIF 300 300 300 - - 11/4,11/2,2,21/2,3 42.4,48.3,60.3,73.0,88.9 FLF 300 300 - - - 4 114.3 ftF 250 250 - - - 11/2,2,21/2,3 48.3,60,3,73.0,88.9, FF 300 300 300 - - 4 114.3 FF 250 250 300 - - 11/4,1V2,2 42.4,48.3,60.3 EZT,MT, MLT, WLS 300 300 300 - - 11/4,11/2,2 42.4,48.3,60.3 GL, Gal 7, Gal Flo 300 300 300 - - 11/2,2 48.3,60.3 BLT, DI 300 300 300 - - 11/2,2 48.3,60.3 IL, XL 300 300 - - - 76.1,165.1 B81387 300 300 300 - - 42.4,48.3,60.3,76.1,88.9,114.3 B81387, ISO 4200 - - - 16 20 139.7 B81387, ISO 4200 - - - 16 - 165.1 B81387, ISO 4200 - - - - 20 168.3, 219.1, 273.0, 323.9 ISO 4200 - - - 16 20 O Figure 716 2x11/2,21/2x2,3x2 60.3 x 48.3, 73.0 x 60.3,88.9 x 60.3 Sch5 175 175 175 - - 3X21/2,42,421/2 88.9x73.0,114.3x60.3,114.3x73.0 Sch5 175 175 175 - - 2X1V2,21/2X2,3X2 60.3x48.3,73.0x60.3,88.9x60.3 Sch lo, Sch 40 350 350 350 - - 3X21/2,42,4X2V2 88.9x73.0,114.3x60.3,114.3x73.0 Sch 1O, Sch 40 350 350 350 - - 4x3,5x4 114.3x88.9, 141.3, 114.3 Sch lo, Sch 40 350 350 300 - - 6x4,6x5 168.3 x 114.3 x 1638.3 x 141.3 Sch 10, Sch 40 350 350 300 - - 8x6 219.1 x168.3 Sch 40 350 350 300 - - 2X11/2,21/2X2,3X2 60.3x48.3,73.0x60.3,88.9x60.3 DF,EZT, FF, GL, MF 300 300 300 - - 2X1V2,21/2X2,3x2 60.3 x 48.3, 73.0 x 60.3, 88.9 x 60.3 MT, MLT, SF, STF,IL 300 300 300 - - 4 x 2 114.3 x 60.3 DF, EZT, FF GL, MF 300 300 300 - - 4 x 2 114.3 x 60.3 MI, MLT, SF, SIF IL 300 300 300 - - 3x21/2,4x21/2,4x3 88.9x73.0,114.3x73.0,114.3x88.9 OF, MF, SF 300 300 300 - - 4x21/2,4x3 114.3 x 73.0,114.3 x 88.9 FF,SIF 300 300 300 - - 5x4,6x4 141.3 x 114.3,168.3 x 114.3 DF, FF, SF, SIF 300 300 300 - - 3X2,3X21/2 88.9x60.3,88.9x73.0 EZ 300 300 300 - - 2X11/2 60.3x48.3 Gal 7, Gal Flo 300 300 300 - - 60.3 x 48.3,73.0 x 60.3,88.9 x 60.3 B81387, ISO 4200 300 - 300 16 20 88.9 x 76.1,114.3 x 60.3,114.3 x 76.1 B51387, ISO 4200 300 - 300 16 20 114.3x88.9 B51387, ISO 4200 300 - 300 16 20 168.3x114.3,219,1x168.3 1S04200 300 - 300 16 20 139.7x114.3 BS1387, ISO 4200 300 - 300 16 - 165.1x114.3 851387, ISO 4200 300 - 300 - 20 Figure 40-5* 11/4, 11/2, 2x /2, /4,1 42.4,48.3,60.3 x 21.3,26.7,33.7 Sch 5, Sch 10, Sch 40 175 175 175 - - 11/4, 11/2, 2x 1/2,3/4,1 42.4,48.3,60.3 x 21.3,26.7,33.7 BLI, OF, DI, GL, LS, MF 175 175 175 - - 11/, 11/2, 2x 1/2,3/4,1 42.4,48.3,60.3 x 21.3,26,7,33.7 MI, MLT, IL, WLS, XL 175 175 175 - - 1V4,11/2,2x1/2,3/4,1 42.4,48.3,60.3 x 21.3, 26.7,33.7 Gal 7, Gal Flo 175 175 175 - - 11/4, 11/2 x 1/2,3/4,1 42.4,48.3 x 21.3,26.7,33.7 Err 175 175 175 - - 1V2x3/2,/4,1 48.3x21.3,26.7,33.7 FF 175 175 175 - - 2V2X1/2,3/4,1 73.0x21.3,26.7,33.7 Sch 10, Sch 40 175 175 175 - - 2V2X1/2,3/4,1 73.0x21.3,26.7,33.7 OF, MF,SIF,XL 175 175 - 175 - - 1V2,2xV2,/4,1 48.3,60.3 x 21.3,26.7,33.7 SIF 175 175 175 - - Figure 40-5 Straps are UL and ULC Listed and FM Approved with NPT and ISO threaded outlets as specified in the chart. Page 4 of 8 TFPISOO Figure Nominal Size Inches Nominal Size mm Pipe Schedule Rated Pressure (psi-UL ULC and FM; bar LPCB and VdS) ® O Figure 730 Threaded*t 2 x 1/2, 1/4,1,11/4, 11/2 60.3 x 21.3, 26.7, 33.7, 42.4, 48.3 Sch 5 175 175 175 - - 2 X 1/2, 3/4, 1, 11/4, 11/2 60.3 x 21.3, 26.7, 33.7, 42.4, 48.3 Sch 10, Sch 40 300 300 300 - - 2V2 X /2, 1/4,11, 1114, 1'/2, 2 73.0 x 21.3, 26.7, 33.7, 42.4, 48.3, 60.3 Sch 10, Sch 40 300 300 300 - - 3,4 x 1h, 3/4 1 88.9, 114.3 x 21.3,26.7,33.7 Sch 10, Sch 40 300 300 300 - - 4X21/z,4X3 114.3 x 73.0,4 x 88.9 Sch 1O, Sch 4O 300 300 300 - - 5X2,5X21I2 141.3 x 60.3,141.3 x 73.0 Sch 1O, Sch 40 300 300 300 - - 6X1V2,2,21/2,3,4 168.3 x 48.3, 60.3,73.0,88.9,114.3 Sch 10, Sch 40 300 300 300 - - 2 x 1/3, 3/4 1,11/4, 11/2 60.3 x 21.3, 26.7,33.7,42.4,48.3 BLT, DT, EZI, FF, GL, MF 300 300 300 - - 2 x 3/3, 1/4,1,11/4, 11/2 60.3 x 21.3, 26.7,33.7,42.4,48.3 MI, MLI, SIF, IL, WLS 300 300 300 - - 2 x 1/2, 1/4,1, 11/4, 11/2 60.3 x 21.3, 26.7,33.7,42.4,48.3 Gal 7, Gal Flo 300 300 300 - - 2 x 1/2,3/4,1 60.3 x 21.3, 26.7, 33.7 DF 300 300 300 - - 21/2,3,4 x 1/3, /4,1 73.0,88.9,114.3 x 21.3,26.7,33.7 DF, FF, MF, SIF 300 300 300 - - 2 X 11/4, 1V2 60.3 x 42.4, 48.3 DF 300 300 300 - - 3,4x2 88.9,114.3 x 60.3 DF, FF, MF,STF 300 300 300 - - 4X21/2 114.3x73.0 DF, FF, MF,SIF 300 300 300 - - 40 114.3x88.9 FF, MF,SIF 300 300 300 1 - - 76.1 x 21.3, 26.7, 33.7 BS1387, ISO 4200 300 - 300 16 20 139.7x48.3, 88.9 BS1387, ISO 4200 300 - 300 16 20 165.1 x 42.4 B51387, ISO 4200 300 - 300 16 20 60.3 x 21.3, 26.7, 33.7, 42.4, 48.3 BS1387, ISO 4200 - - - 16 20 76.1 x 42.4, 48.3, 60.3 BS1387, ISO 4200 - - - 16 20 88.9 x 21.3, 26.7, 33.7, 42.4, 48.3, 60.3 BS1387, ISO 4200 - - - 16 20 114.3 x 21.3, 26.7, 33.7, 42.4 B51387, ISO 4200 - - - 16 20 114.3 x 48.3, 76.1, 88.9 BS1387, ISO 4200 - - - 16 20 165.1 x 48.3, 60.3, 76.1, 88.9,114.3 BS1387, ISO 4200 - - - - 20 139.7 x 65.3, 76.1 BS1387, ISO 4200 - - - 16 - 168.3 x 48.3, 60.3, 73.0 ISO 4200 - - - 16 20 168.3, 219.1 x 76.1, 88.9,114.3 ISO 4200 - - - 16 20 O Figure 730 Grooved** 2x 11/2 60.3 x 48.3 Sch 5 175 175 175 - - 2,21/2,3,4,5,6 x 1'/2 60.3,73.0,88.9,114.3,141.3,168.3 x 48.3 Sch 10, Sch 40 300 300 300 - - 3,4,5 x 2,21/2 88.9, 114.3,141.3 x 60.3, 73.0 Sch 10, Sch 40 300 300 300 - - 4x3,5x3 114.3 x 88.9,141.3 x 88.9 Sch 1O, Sch 4O 300 300 300 - - 6 x 21/2,3,4 168.3 x 48.3,73.0,88.9,114.3 Sch 10, Sch 40 250 250 250 - - 8 x 21/2,3,4 219.1 x 73.0, 88.9,114.3 Sch 10, Sch 40 300 300 300 - - 2,21/2,3,4 x 11/2 60.3, 73.0, 88.9, 114.3 x 48.3 OF 300 300 300 - - 3,4 x 2 88.9,114.3 x 60.3 OF 300 300 300 - - 2 x 11/2 60.3 x 48.3 BLT, IL 300 300 300 - - 3 x 11/2 88.9 x 48.3 EZ 300 300 300 - - 139.7 x 48.3, 88.9 BS1387, ISO 4200 300 - 300 16 20 165.1 x 42.4, 48.3, 60.3, 76.1 BS1387, ISO 4200 300 - 300 16 20 60.3 x 42.4, 48.3 BS1387, ISO 4200 - - - 16 20 76.1 x 42.4, 48.3, 60.3 BS1387, ISO 4200 - - - 16 20 88.9 x 42.4, 48.3, 60.3 BS1387, ISO 4200 - - - 16 20 114.3 x 42.4, 48.3, 60.3, 76.1, 88.9 BS1387, ISO 4200 - - - 16 20 165.1 x48.3, 60.3, 76.1, 88.9, 114.3 BS1387, ISO 4200 - - - - 20 139.7 x 60.3, 76.1 B51387, ISO 4200 - - - 16 - 168.3 x 48.3, 60.3,73.0 ISO 4200 - - - 16 20 168.3, 219.1 x 76.1, 88.9,114.3 ISO 4200 - - - 16 * Figure 730 Threaded Mechanical Outlets are UL and ULC Listed and FM Approved in both the Tee and Cross configuration with NPT and ISO threaded outlets as specified in the chart. ** Figure 730 Grooved Mechanical Outlets are UL and ULC Listed and FM Approved in both the Tee and Cross configuration. f Figure 730 Threaded and Grooved Mechanical Outlets are VdS Approved in the Tee configuration only. Grinnell® products are UL and ULC Listed and FM, LPCB and VdS Approved, as specified in the charts, for the pressure ratings shown for use in Fire Protection Systems (automatic sprinkler, open sprinkler and standpipe) and connections to such systems. The charts were developed from the latest Listings and Approval data available at the time of publication. Listings are subject to changes and additions by the approval bodies. For Dry Pipe systems or Freezer Systems, use Td-Seal Gaskets and petroleum free silicone lubricant. Follow installation instructions provided in the Installation Handbook IH-1000. TFPI800 Page 5 of 8 Figure Nominal Size Inches Nominal Size mm Pipe Schedule Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) - © - - - - Figure 577 1-1/4,1-1/2,2 42.4,48.3,60.3 FLF, MF, XL, GL, 10, 40, ci; DF,TL, WLS, MI, MLT 300 300 300 2-1/2,3,4 73.0,88.9,114.3 FLF,MF,OF 300 300 300 - - 2-1/2,3 73.0,88.9 FF, XL 300 300 300 1-1/4,1-1/2,2, 2-1/2,3,4,6,8 42.4, 48.3, 60.3, 73.0, 88.9, 114.3, 168.3,219.1 10 300 300 300 1-1/4,1-1/2,2, 2-1/2,3,4,6 42.4, 48.3, 60.3, 73.0, 88.9, 114.3, 168.3 40 300 300 300 1,1-1/4,1-1/2,2 33.7,42.4,48.3, 60.3 5 175 175 175 3,4,6 88.9,114.3,168.3 EZF 300 300 300 11/4 42.4 EZT 300 300 300 1-1/2,2 48.3,60.3 EZi; FF 300 1 300 300 1-1/2,2,2-1/2,3,4 48.3,60.3,73.0, 88.9, 114.3 STF 300 300 300 4 114.3 STF 250 250 250 8 219.1 0.188 in. wall 300 300 300 1 33.7 10, 40, XL, IL, OF, BLI, DL, DI, MI, WLS, WST, GL, MIT, EZT, ET, EL, 5, BS1387M, ISO 4200 300 300 300 5 141.3 10 300 300 300 5 141.3 40 300 300 300 76.1mm, 165mm BS1387M, ISO 4200 300 300 139.7mm ISO 4200 300 300 - 1,1-1/4,1-1/2,2,3,4 33.7,42.4,48.3,60.3,88.91114.3 BS1387M, ISO 4200 - - - 20 bar 76.1, 165.1 BS1387M, ISO 4200 20 bar 6,8 168.3, 219.1 ISO 4200 - 20 bar 1,1-1/4,1-1/2,2,3, 4,6,8 33.7,42.4,48.3,60.3,88.9,114.3, 168.3, 219.1 ISO 4200 16 bar 76.1, 139.7 ISO 4200 16 bar Pipe Schedule Key STF - Steady Flow Listed/Approved steel sprinkler pipe manu- factured by AMS Tube Corp. BLT - Black Light Wall Threadable Listed/Approved steel sprin- kler pipe manufactured by Allied Tube and Conduit. DF - Dyna-Flow Listed/Approved steel sprinkler pipe manufac- tured by Allied Tube and Conduit. DT - Dyna-Thread Listed/Approved steel sprinkler pipe manu- factured by Allied Tube and Conduit. SF - Super-Flow Listed/Approved steel sprinkler pipe manu- factured by Allied Tube and Conduit. XL -Extra Light Weight Listed/Approved steel sprinkler pipe manufactured by Allied Tube and Conduit. UE - Ultra-Eddy Listed/Approved steel sprinkler pipe manufac- tured by Bull Moose Tube Company. TL - TL Listed/Approved steel sprinkler pipe manufactured by Central Grooved Piping Products. LS - Listed/Approved steel sprinkler pipe manufactured by Century Tube Corporation. ID - DOD Listed/Approved steel sprinkler pipe manufactured by IDOD Systems. GAL-FLO - Listed/Approved steel sprinkler pipe manufactured by IDOD Systems. GAL-7 - Listed/Approved steel sprinkler pipe manufactured by IDOD Systems. EZ - EZ-Flow Listed/Approved steel sprinkler pipe manufac- tured by Northwest Pipe and Casting Company. FLF - Fire Line Flow Listed/Approved steel sprinkler pipe man- ufactured by Western International Forest Products. MF - Mega Flow Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. MLT - Mega Light Listed/Approved steel sprinkler pipe manu- factured by Wheatland Tube Company. MT - Mega Thread Listed/Approved steel sprinkler pipe manu- factured by Wheatland Tube Company. SL - Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. WLS - WLS Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. WST - WST Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. GL - GL Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. EZT - EZ Thread Listed/Approved steel sprinkler pipe manu- factured by Youngstown Tube Company. FF - Fire-Flo Listed/Approved steel sprinkler pipe manufac- tured by Youngstown Tube Company. 5 - Schedule 5 steel sprinkler pipe 10- Schedule 10 steel sprinkler pipe 20- Schedule 20 steel sprinkler pipe 30 - Schedule 30 steel sprinkler pipe 40 - Schedule 40 steel sprinkler pipe BS1387m - British Standard Medium Listed/Approved steel sprinkler tube. 1S04200 - ISO Standard Listed/Approved steel sprinkler tube. JIS G3452 - Japanese International Standard Note: Cut and roll grooved references are for pipe runs and also grooved outlets. FigureNominal Size Inches Nominal Size mm Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) 1j jM ADACAP 11/2 X 1/2, 3/4, 1 42.4 x 21.3, 26.7, 33.7 300 300 300 - - 2 x 1/2, 3/4, 1 48.3 x 21.3, 26.7,33.7 300 300 300 - - 21/2 X 1/2 3/4, 1 60.3 x 21.3, 26.7,33.7 300 300 300 - - Figure 201 1 33.7 500 500 500 - - 11/4, 11/2, 2, 3,4 42.4, 48.3,60.3, 88.9, 114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0,141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 139.7 500 - 500 16 - 108.0, 133.0, 159.0, 216.3 300 - 300 - - Figure 210 1 33.7 500 500 500 - - 11/,,11/2, 2, 3, 4 42.4, 48.3,60.3, 88.9, 114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0,141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 _________________ 139.7 500 - 500 16 - 108.0, 133.0, 159.0, 216.3 300 - 300 - - Figure 219 1 33.7 500 500 500 - - 11/4,11/2,2,3,4 42.4, 48.3, 60.3, 88.9,114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0, 141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 139.7 500 - 500 16 - 108.0,133.0,159.0,216.3 300 - 300 - - Figure 260 11/4,11/2,2,3,4 42.4, 48.3, 60.3, 88.9,114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0, 141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 139.7 500 - 500 16 - Figure 250 11/2,X1,2X1 48.3 x 33.7, 60.3 x 33.7 500 500 500 16 - 2 xl 1/4, 2 x 11/2 60.3 x 42.4, 60.3 x 48.3 500 500 500 16 20 2V2X2,3X21/2,4X21/2 73.0 x 60.3, 88.9 x 73.0,114.3x73,0 500 500 500 16 20 4x2,6x2 114.3x60.3, 168.3x60.3 500 500 500 16 - 3 x 2, 4 x 3, 6 x 4 88.9 x 60.3,114.3 x 88.9, 168.3 xl 14.3 500 500 500 16 20 5 x 4,6 X 5 141.3 X 114.3,168.3 X 141.3 500 500 500 - - 76.1 x 48.3, 76.1 x 60.3 500 500 500 16 20 88.9 x 76.1,114.3 x 76.1 500 500 500 16 20 139.7 x 88.9, 139.7 x 114.3 500 500 500 16 - 165.1x114.3 500 500 500 - 20 168.3 x 76.1, 168.3 x 139.7 500 500 500 16 - 165.1 x 88.9,165.1 x 139.7 500 - 500 - - Figure AD Figure 201 45° Elbow Figure 210 90° Elbow Figure 2q r Tee Figure 260 - -- . End Cap FI; Figure 250 . 1° Concentric Reducer Page 6 of 8 TFPI 800 * ADACAPs are UL and ULC Listed and FM Approved with NPT and ISO threaded outlets. TFPI 800 Figure 501 45° Elbow fr Figure 510 901 Elbow ,•• • - 91F Figure 5 Tee Figure 501S 45° Elbow fr Figure 510S 90° Elbow Figure 519S Tee Figure 5100E Drain Elbow St Page 7 of 8 Figure Nominal Size Inches Nominal Size mm Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) Figure 501 11/4,11/2,2,3,4 42.4,48.3,60.3,88.9,114.3 300 300 300 16 20 6,8 168.3, 219.1 300 300 300 16 20 21/2,5 73.0, 141.3 300 1 300 1 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 510 11/4,11/2,2,3,4 42.4,48.3,60.3,88.9,114.3 300 300 300 16 20 6,8 168.3,219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 519 11/4, 11/2,2,3,4 42.4,48.3,60.3,88.9,114.3 300 300 300 16 20 6,8 168.3,219.1 300 300 300 16 20 2'/2,5 73.0,141.3 300 300 300 - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 501S 2,3,4,6,8 60.3,88.9,114.3,168.3,219.1 300 300 300 16 20 21/2,5 73.0, 141.3 300 300 300 - - 76.1 - 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 2,3,4,6,8 60.3, 88.9,114.3,168.3, 219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 2,3,4,6,8 60.3, 88.9, 114.3, 168.3, 219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 510DE 21/2,3,4,5 73.0, 88.9,114.3,141.3 300 300 300 - 6,8 168.3, 219.1 300 300 300 - - TFPI800 Fabricated Fittings Figure Nominal Size Inches Rated Pressure (psi) Figure 391 Groove x Male Threaded Adapter Nipples 1,11/4,11/2 300 300 2,2% 300 ____________ 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 392 Groove x Groove Adapter Nipples 1,V/4,1'/2 300 300 2 12% 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 393 Groove x Bevel Adapter Nipples 1,1¼,1V2 300 300 2,21,4 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 312 221,40 Elbow 11A,1½ 300 300 2,21/2 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 313 111/4* Elbow 11/411,4 300 300 2,21/2 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Page 8 of 8 Figure Nominal size Inches Rated Pressure (psi) Figure 321 Reducing Tee 11/4,11/2 300 300 2,21,4 _________________ 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 327 Cross 1,11/4,1% 300 300 2, 2½ 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 341 Groove Flange Adapter 150 lbs. 1,1%,1½ 300 300 2,2% 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 350 Concentric Groove x Groove Reducer 11/4,11,4 300 300 2,21/2 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 General Notes: It is the Designer's responsibility to select products suitable for the intended service and to en- ISO sure that pressure ratings and performance data is not exceeded. Always read and understand the installation 9001 instructions (I1-1-1000). Never remove any piping component or correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application. Certified Company TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale Pennsylvania 19446 Threaded Fittings Tyco Fire Products --- www.tyco-grooved.com EENTRAL 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 --- USA ________ Customer Service/Sales: Tel: (215)362-0700/ Fax: (215) 362-5385 Grooved Piping Products Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 General Description See Fire Protection Submittal Sheet for pressure rating and Listing and Approval information Ductile Iron threaded fittings (with the exception of California Tees and Street Elbows) conform to ANSI B16.3. They are higher in strength and more corrosion resistant than cast iron fittings. The additional strength is provided by the ductile properties making up the fitting. This is accomplished by adding magnesium while the iron is being poured into it final cast shape. This provides an advantage as the fittings are not as susceptible to leaks or cracking and they are also lighter than standard cast iron. Caution: Installers who have not used ductile iron threaded fittings before should be instructed that the fittings are stronger than the pipe and over- tightening the fitting can create leaks and cause damage to pipe threads. In genera!, there is about one-half turn difference between cast iron and ductile iron fittings. Apply Teflon tape or high quality pipe joint compound on the male pipe threads and tighten two to three turns beyond hand tight. If you are using an automatic make-on machine, please exercise caution in setting your machine to the proper parameters prior to tightening fittings onto the male pipe threads. Technical Data Figures: 811, 812, 813, 814, 815, 816, 817, 818, 820, 825, 827, 830, 719, California Tees, and Street Elbows Sizes: 1/2" -21/2" Maximum Working Pressure: 800 Series, California Tees, and Street Elbows: 300 psi Figure 719: 250 psi Approvals: UL, and FM Note: See Fire Protection Submittal Sheet for exact Listing/Approval information. Manufacture Source: Imported Material: Ductile Iron, conforming to ANSI B16.3 (Note: Figure 719 Plugs are constructed of Cast Iron) Thread: N.P.T. rA Installation Apply Teflon Tape or high quality pipe joint compound on the male pipe threads and tighten two to three turns beyond hand tight. (See caution in first column) fl Ordering Procedure Ordering information: When placing an order, indicate the full product name. Please specify the quantity, figure number and size. Availability and Service: Grooved Piping Products, valves, accessories and other products are available throughout the U.S., Canada, and internationally, though a network of distribution centers. You may write directly or call 215-362-0700 for the distributor nearest you. Care and 171 Maintenance The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in accordance with the applicable standards of the National Fire Protection Association (e.g., NFPA 25), in addition to the standards of any authority having jurisdiction. The installing contractor or product manufacturer should be contacted relative to any questions. Any impairment must be immediately corrected. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service. No. 21-3.0 -2- Size Inches A Inches B Inches Part Number Weight Lbs. Box Qty. 1/2 11/8 /16 86206 0.24 240 3/4 1/16 3/4 86205 0.40 120 1 11/2 13/16 86200 0.64 70 11/4 1/4 11/16 86201 0.95 40 1 V2 115/16 13/16 86202 1.24 30 2 21/4 11/2 86203 1.74 20 21/2 211/16 1 /16 86204 3.28 10 f-c9 Figure 815 Reducing Tee Size Inches A Inches B Inches I C linches I D linches F Inches F Inches Part Number M. Lbs. Box Oty. 3/4 x3/4X 1/2 13/16 1/16 11/4 /8 /8 11/16 86235 0.46 95 3/4 x 3/4 x 1 1/16 1/16 1/8 /8 78 11/16 86755 0.68 65 I xVx 1 11/2 1/8 11/2 13/16 13/16 13/16 86236 0.70 55 I X 3/4 X 1/2 11/4 is/is 1/8 /16 /8 13/16 86756 0.63 80 1 X 3/4 X 3/4 1/8 1 V1 1 it/is 11/16 3/4 /8 86757 0.68 65 1x3/4x1 11/2 17/16 11/2 13/15 /8 13/16 86237 0.77 55 lxi XV2 11/4 11/4 is/a s/is /16 13/16 86238 0.66 65 lxi X3/4 is/a 1/8 1/16 11/15 11/16 7/8 86239 0.731 60 lxix 11/4 111/16 111/16 1 V1 1 1 7/8 86240 0.97 45 lxix 11/2 113/16 113/16 1 V 11/s 1 V 7/ 86241 1.14 35 11/4x1 x1/2 115/16 11/4 1/16 /8 9/16 1 86242 0.81 50 11/4x1 x3/4 1/16 1/8 15/8 3/4 11/16 11/16 86243 0.90 50 11/4xlxl 1/16 11/2 ill/is 7/ 13/16 1 86244 1.03 45 11/4xix1V4 1/4 111/16 1/4 11/16 1 11/16 86245 1.10 40 11Ax1 xiV2 1/8 113/16 113/16 1/16 11/8 11/16 86246 1.43 30 iV4x11/4x1/2 1/8 is/a 1/16 li/is 11/16 1 86247 0.87 45 11/4x11/4x3/4 1/16 1/16 1/8 3/4 3/4 11/16 86248 0.96 45 11/4x11/4x1 1/16 1/16 111/16 7/ 1/ 1 86249 1.101 40 11/4x11/4x11/2 1'/8 17/8 113/16 113/16 113/16 11/16 86250 1.50 30 11/4x11/4x2 21/8 21/8 2 it/is 1/16 11/8 86251 2.00 24 11/2 x 1 x1/2 1/16 1/16 ifl/is 11/16 /s 11/8 86252 0.97 40 11/2 x 1 x3/4 11/2 1/8 1/4 3/4 11/16 1/16 86253 1.14 40 11/2x lxi i/8 11/2 113/16 /8 13/16 IVa 86254 1.14 30 11/2 xix11/2 115/16 113/16 115/16 1/16 11/8 13/ 16 86255 1.52 30 11/2x11/4 x1/2 1/16 1 V1 111116 11/16 /8 11/8 86257 1.03 40 1V2xl1/4 x3/4 11/2 it/is 1/4 3/4 3/4 i/16 86258 1.10 40 11/2x11/4x1 1 V is/is 113/16 7/ 11/8 86259 1.31 30 11/2x11/4x2 2/16 21/8 2 it/is i'/is 11/4 86260 1.941 20 11/2x 11/2x1/2 1/16 17/16 111/16 11/16 11/15 11/8 86261 1.14 35 11hx11/2x3/4 11/2 11/2 1/4 3/4 3/4 1/16 86262 1.23 35 11/2x11/2x1 1 V 1 V 113/16 /8 7/ 11/8 86263 1.38 30 1V2x iV2x 11/4 i's/is 113/16 1/s 11/16 11/16 is/is 86264 1.50 lV2xiV2x2 2/16 2/is 2 1 /16 l/ls 11/4 86265 2.00 2x1x2 21/4 2 2V4 11/2 is/is 11/2 86266 2.18 r30 2x11/4x 2 21/4 21/8 21/4 11/2 1/16 11/2 86267 2.31 2x11/2xV2 1V2 i/s it/s 3/4 11/16 15/ 16 86268 1.50 2x 11/2x3/4 11/8 11/2 115/16 7/ 3/4 1/8 86269 1.61 25 2x11/2xi 1/4 is/s 2 1 7/s is/is 86270 1.65 20 2x11/2x11/2 21/16 115/16 2/16 1/16 is/is 17/16 86272 2.03 20 2x 11/2x2 21/4 2/is 21/4 11/2 17 /16 11/2 86273 2.37 15 2x2x1/2 11/2 11/2 1/8 3/4 3/4 1/16 86222 1.50 30 2x2x3/4 la/a is/s 1 15A 7/ 7/ is/s 86223 1.67 20 2x2x1 1/4 1/4 2 1 1 is/is 86224 1.91 20 2x2x1114 li/s i'/s 21/8 iVs iVs it/is 86225 2.05 20 2x2x11/2 2 2 2/16 11/4 11/4 11/2 86226 2.11 15 2x2x21/2 2/8 2/8 12/s 1/4 it/s i'/is 86227 13.671 10 21/2x2x3/4 i/4 i/8 2/ls /8 7/ l/4 86274 12.22115 F13-i Figure 812 90° Reducing Elbow Size Inches A Inches B Inches C Inches D Inches Part Number Weight Lbs. Box Qty. 3/4 x 1/2 i/16 1/16 /8 /8 86342 0.33 160 I X V2 11/4 1/8 /16 13/16 86210 0.44 110 I X 3/4 1 is/s i'/is 1 11/16 1 7/8 86211 0.53 90 11/4 x 1/2 1/16 11/2 1 /8 1 15/16 86212 0.64 75 11/4 X 3/4 17/ 16 1/ 3/4 11/16 86213 0.75 60 11/4 x I 19/16 111/16 1 86214 0.77 55 11/2X3/4 11/2 1/4 3/4 1/16 1 86221 0.95 45 11/2x 1 1 1/8 113/16 /8 1 V 86215 0.99 40 11/2 x 11/4 113/16 1/8 11/8 i/16 86216 1.14 35 2 x 3/4 1/8 115/16 /8 13/8 86217 1.39 30 2 X I i/4 21/16 2 i/16 86218 1.58 25 2x 11/2 2 2/16 11/4 1 1/16 1 86220 1.67 20 21/2 X2 2/8 2/a 11/4 1 1/8 1 86262 3.01 15 Figure 811 900 Elbow Size Inches A Inches B Inches Part Number Weight Lbs. Box Oty. 1/2 /8 /8 86780 0.22 250 3/4 1 7/16 86781 0.33 150 1 11/8 1 13/16 86280 0.48 1 90 11/4 i/16 /8 86281 0.73 50 11/2 17 /16 11/15 86282 0.93 35 2 111/16 15/16 86283 1.55 18 21/2 1 115/16 1 1 86782 2.70 12 Size Inches A Inches B Inches Part Number Weight Lbs. Box Oty. 1/2 11/8 /16 86340 0.33 150 3/4 1/16 3/4 86341 0.50 90 1 11/2 13/16 86230 0.85 60 11/4 1/4 11/16 86231 1.30 35 11/2 115/16 1/16 86232 1.63 24 2 21/4 11/2 86233 2.63 12 21/2 211/16 1 /16 86234 4.55 8 Figure 813 45° Elbow Figure 814 Tee Size Inches A Inches B Inches Part Number Weight Lbs. Box Oty. 3/4 x 1/2 1/4 11/16 86772 0.38 240 1 X 1/2 111/16 1/2 86228 0.38 200 1 X 3/4 1/4 1/2 86229 0.53 110 Figure 825 Extension Piece Size Inches A Inches Part Number Weight Lbs. Box Oty. 1/2 x11/2 11/2 72751 0.20 300 1/2 x 2 2 72980 0.27 250 3/4 x11/2 11/2 72981 0.22 250 3/4 x2 1 2 1 72982 1 0.31 M Figure 816 Reducing Coupling Figure 719 Cast Iron Plug Figure 817 Cross Figure 827 Hex Bushing Size Inches A Inches B Inches C Inches 0 Inches Part Number Weight Lbs. Box Qty. 1 11/2 11/2 13/16 13/16 86284 0.97 45 11/4 1/4 1/4 11/16 11/16 86285 1.59 25 11/2 115/16 115/16 1/16 1/16 86286 1.89 20 2 21/4 21/4 11/2 11/2 86287 2.93 10 11/4 x11/4x1 X 111/16 1/16 I Ia 86289 1.25 30 11/2 X 1112X 1 X 113/16 1/8 11/is 115/16 86322 1.48 24 2x2x1x1 1 2 1/4 11/4 11/16 86291 2.64 10 Size Inches A Inches Part Number Weight Lbs. Box Qty. 1 x h/2 11/16 72726 0.22 280 I x 3/4 11/16 72762 0.18 280 11/4 X 1 1/16 72763 0.31 150 11/2 X 1 11/4 72757 0.53 100 11/2x11/4 11/4 72764 0.35 100 2 x 1 1/s 72759 0.75 80 2x 11/4 1/8 72761 0.69 80 2x 11/2 1/8 72775 0.62 80 Figure 818 B A Straight Coupling Size Inches A Inches B Inches Part Number Wrench Weight Lbs. Box Oty. 1/2 1/ /16 72779 11/6 0.18 360 3/4 1/ /l6 72778 13/8 0.26 200 1 1/4 /8 72755 111/16 0.44 110 1V4 2 /16 72754 2 0.54 75 11/2 2/16 3/4 72753 21/4 0.71 60 2 2/8 11/6 72752 2/4 1.15 30 21/2 3 3/4 72758 33/8 2.29 18 I LI_fl_i IJ Figure 830 F I I 1 A Brass Seat Union Size Inches A Inches B Inches Part Number Weight Lbs. Box Qty. 1/2 1/ 13/16 86207 0.47 110 3/4 2 15/16 86275 0.66 80 1 23/16 13/16 86276 1.08 50 11/4 21/2 11/16 86277 1.54 35 11/2 2/a 1/1 86278 2.03 25 2 31/s 1/8 86279 3.15 18 Size Inches A Inches Part Number Weight Lbs. Box Qty. 1/2 7/ 72776 0.15 500 3/4 1 72777 0.22 300 1 13/ 16 72824 0.33 180 1/4 1/is 72756 0.54 110 11/2 1/a 72822 0.68 80 2 11/2 72823 0.96 45 2/2 1/4 72825 1.80 25 Size Inches A Inches Part Number Weight Lbs. Box Oty. 1/2 15/16 86292 0.10 500 3/4 11/8 86293 0.18 300 1 11/4 86294 0.28 200 11/4 1/a 86295 0.50 110 11/2 1/16 86296 0.70 80 2 11/2 86297 0.90 45 Figure 820 Cap 1'fPu -3- Street Elbows FFTT-T California Tees Size Inches A Inches B Inches C Inches Part Number Weight lbs. Box Qty. I X 1/2 11/2 3/4 3 42003 0.70 80 1 X 1 11/2 3/4 3 42002 0.90 60 Size Inches A Inches B Inches C Inches D Inches Part Number Weight lbs. Box Oty. I x 1/ x 1 11/2 /8 3 3/4 42000 0.95 50 1 x I x 1 11/2 3/4 3 3/4 42001 0.95 45 NILimited _______Warranty Products manufactured by Tyco Fire Products are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by Tyco Fire Products. No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco Fire Products or for products and components which have been subject to misuse, improper installation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protection Association (NFPA), and/or the standards of any other Authorities Having Jurisdiction. Materials found by Tyco Fire Products to be defective shall be either repaired or replaced, at Tyco Fire Products' sole option. Tyco Fire Products neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco Fire Products shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer's representatives. IN NO EVENT SHALL TYCO FIRE PRODUCTS BE LIABLE, IN CONTRACT, TORT, STRICT LIABILITY OR UNDER ANY OTHER LEGAL THEORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR CHARGES, REGARDLESS OF WHETHER TYCO FIRE PRODUCTS WAS INFORMED ABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT SHALL TYCO FIRE PRODUCTS' LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE. THE FOREGOING WARRANTY IS MADE IN LIEU OFANYAND ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. General Notes: It is the Designer's responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Never remove any piping component nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application. tijc 0/F/ow Control/ Tyco Fire Products Printed U.S.A. 10-01 3 5/16" diameter plate 2 3/4" diameter plate QUICK RESPONSE WHITE FLAT PLATE CONCEALED PENDENT GL6UUM BE rinr CflfllRll/I En rnnnnnATinki "THE INCH" QUICK RESPONSE A UTOMA TIC SPRINKLER MODEL GL5606 riiu JrflhIuu.LI wflrJIu4u iui ,,,... hit A i ii IFA i.I WIVE IIVLJ1 MUJUO IAbL. FLAT PLATE CONCEALED PENDENT DESCRIPTION AND OPERATION The Globe Quick Response GL5606 Adjustable Concealed Pendent Sprinkler has a low profile, aesthetically pleasing design. It provides sprinkler operations approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards. This sprinkler offers the additional feature of greatly in- creased safety to life and should be used advisedly and under the direction of approving authorities having jurisdiction. The sprinkler is available with a nominal 1" of adjustment and a low profile cover plate assembly. All that is seen at the ceiling is a 3 5/16" diameter ceiling plate or an optional 2 3/4" diameter ceiling plate color finished to match the specifier's exact requirements. The GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the "smooth flow" of the ceiling. Globe's GL5606 Concealed Sprinkler utilizes a 3mm frangible glass ampule which is located above the ceiling and concealed from view by the ceiling plate. The provided protective cap needs to be removed in order to install the sprinkler with the proper wrench. The protective cap must be replaced on the sprinkler until the time the cover plate is to be installed. The "push on - screw off' designed cover plate is easily installed and with a nominal 1" of adjustment makes it easier to get a proper fit at the ceiling. Operation of the sprinkler occurs when heat build up causes the solder holding the cover plate to the support shell to melt allowing the cover plate to fall clear. Continued heat build up causes the 3mm glass bulb to burst allowing the deflector to drop down and distribute water in an approved pattern to extinguish or control the fire. TECHNICAL DATA 'See reverse side for Approvals and Specifications. -Temperature Ratings - 135°F (57°C) Sprinkler, 135°F (57°C) Cover Plate 155°F (68°C) Sprinkler, 135°F (57°C) Cover Plate 155°F (68°C) Sprinkler, 155°F (68°C) Cover Plate 175°F (79°C) Sprinkler, 155°F (68°C) Cover Plate 200°F (93°C) Sprinkler, 155°F (68°C) Cover Plate 'Water Working Pressure Rating -175 psi (12 Bars) 'Factory tested hydrostatically to 500 psi (34 Bars) 'Maximum low temperature glass bulb rating is -67°F (-55°C) -Frame - bronze • Deflector - brass • Screw - brass -Lodgement Wire - stainless steel • Bulb seat - copper -Spring - nickel alloy • Seal - teflon' Drop Pin - stainless steel Bulb - glass with alcohol based solution, 3mm size -Cover Plate - brass 'Upper Escutcheon Assembly - steel NOTE: Globe's wrench PIN 332765 must be used to install this sprinkler. *SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER BULB R COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURES TEMPERATURE ORDINARY 1 H ORANGE/RED INTERMEDIATE YELLOW/GREEN 1 NOV 2016 GFS-150a (Formerly A-38) "THE INCH" QUICK RESPONSE A UTOMA TIC SPRINKLER MODEL GL5606 ONE INCH ADJUSTABLE FLAT PLATE CONCEALED PENDENT SPECIFICATIONS NOMINAL THREAD SIZE LENGTH FLAT COVER "K" FACTOR PLATE FINISHES 5.6 1/2"NPT 21/2' Chrome (80 metric) (15mm) (6.4cm) White Painted Other Finishes' .2 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 'FINISHES AVAILABLE ON SPECIAL ORDER. 'FOR PLATES OTHER THAN WHITE, CONTACT GLOBE FOR ORDERING SPECIFICATIONS. APPROVALS STYLE SIN MODEL HAZARD1 135°F (57°C) Flat Cover Plate 155°F Flat Cover Plate _(68°C) cULus *FM NYC-DOB MEA -135-F (57°C) 155°F (68°C) **155F (68°C) 175°F (79°C) 200°F (93°C) Sprinkler Sprinkler Sprinkler Sprinkler Sprinkler 101-92-E Adjustable Concealed GL5606 LH/OH X X X X X X X X Pendent 'SPRINKLERS SHALL BE LIMITED AS PER THE REQUIREMENTS OF NFPA13 AND ANY OTHER RELATED DOCUMENTS. *FM APPROVED AS STANDARD RESPONSE **NO FM APPROVALS OH: ORDINARY HAZARD ROSS SECTIONS 2 1/4" DIA. MIN. HOLE IN CEILING -17/8" DIA.- -' - 1"x1/2" EOUCERTh HI / I I REDUCER 23/4"MAX -- 17/8 MIN. SUPPORT- DEFLECTOR SUPPORT DROP PIN I SHELL SHELL I 23/4" DIA. 1/8" 35/16" OlE.118. J FLAT COVER PLATE -FLET COVER PLATE 1" ADJUSTMENT FLAT PLATE CONCEALED PENDENT FLAT COVER PLATE SIZES WHITE 135°F (57°C) PART# WHITE 155°F (68°C) PART# CHROME 135°F (57°C) PART# CHROME 155°F (68°C) PART# 2 3/4" DIA. 332726 332731 332724 332729 35/16' DIA. 332706 332711 332704 332709 2 1/4" DIA. MIN. HOLE IN CEILING -17/8" DIA.- 2 3/4' M. 17/8' MIN. DROP PIN ORDERING INFORMATION SPECIFY 'Quantity 'Model Number 'Style 'Orifice *Thread Size 'Temperature ' Finishes desired 'Quantity - Wrenches - P/N 332765 *Quantity - Protective Caps - P/N 332695 GLIbuz FIRE SPRINKLER CORPORATION NOV 2016 GLOBE® PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 FAX 989-846-9231 1-800-248-0278 www.gIobesprinkler.com PRINTED U.S.A. GFS-1 50a (Formerly A-38) tqcci Worldwide i Fire Protection Contacts www.tyco-fire.com Products Model ESFR-25 252 K-factor Pendent Sprinkler Early Suppression, Fast Response General Description TYCO Model ESFR-25 Pendent Sprin- klers are Early Suppression, Fast Response (ESFR) sprinklers having a nominal K-factor of 25.2 (Ref. Figure 1). They are suppression-mode sprinklers that are especially advantageous as a means of eliminating the use of in-rack sprinklers when protecting high-piled storage. The Model ESFR-25 Sprinklers are pri- marily used for ceiling-only sprinkler protection of (but not limited to) the fol- lowing storage applications: most encapsulated or non-encap- sulated common materials including cartoned, unexpanded plastics uncartoned (exposed) expanded plastics in accordance with NFPA 13 and FM Global standards some storage arrangements of rub- ber tires, roll paper, flammable liq- uids, aerosols, and automotive components For more specific criteria, refer to Table A as well as the applicable design standard. The Model ESFR-25 Pendent Sprin- klers provide the system designer with hydraulic and sprinkler place- ment options not presently available to the traditional ESFR sprinklers having nominal K-factors of 14.0 and 16.8. In particular, the Model ESFR-25 Sprin- kler has been designed to operate at substantially lower-end head pres- sures, as compared to ESFR Sprinklers IMPORTANT Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fall to operate in a fire situation or cause it to operate prematurely. Page 1 of 4 having nominal K-factors of 14.0 and 16.8. This feature offers flexibility when sizing system piping, as well as possi- bly reducing or eliminating the need for a system fire pump. Also, Model ESFR-25 Sprinklers permit use of a maximum deflector-to-ceiling distance of 18 inches (460 mm) versus 14 inches (356 mm). Additionally, a storage arrangement of 40 ft. (12,2 m) with a ceiling height of 45 ft. (13,7 m) does not require in-rack sprinklers as do other ESFR Sprinklers having nominal K-factors of 14.0 and 16.8. The Model ESFR-25 Sprinklers are listed by Underwriters Laboratories (UL) for specific applications with a maximum storage height of 43 ft. (13,1 m) with a maximum ceiling height of 48 ft. (14,6 m) without the requirement for in-rack sprinklers. Refer to the Specific Application Listing (UL) for the design criteria. Applications for the TYCO ESFR Sprin- klers are expanding beyond currently recognized installation standards. For information on research fire tests (e.g., with flammable liquids and aerosols) that may be acceptable to an author- ity having jurisdiction, contact Tyco Fire Protection Products (TFPP) Technical Services. NOTICE The Model ESFR-25 Sprinklers described herein must be installed and maintained in compliance with this document, as well as with the applica- ble standards of the National Fire Pro- tection Association (NFPA), in addition to the standards of any authorities having jurisdiction (e.g., FM Global). Failure to do so may impair the perfor- mance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. In all cases, the appropriate NFPA or FM Global installation standard, or other applicable standard, must be referenced to ensure applicability and to obtain complete installation guide- JULY 2016 lines. The general guidelines in this data sheet are not intended to provide complete installation criteria. Sprinkler Identification Number (SIN) 1Y9226 TY9226 is a re-designation for Central SIN 9226, Gem SIN G8441, and Star SIN S8010. Technical Data Approvals UL and C-UL Listed FM Approved VdS Approved NYC Approved under MEA 356-01-E LPCB Certified (Cert. Nos. 094b and 0071) CE Certified (Certificate of Conformity 1725-CPD-HOO10) Maximum Working Pressure 175 psi (12,1 bar) Pipe Thread Connections 1 Inch NPT or ISO 7-R 1 Discharge Coefficient K=25.2 gpm/psi½ (362,9 1pm/barY2) Temperature Ratings 165F (74°C) and 212°F (100°C) Finish Natural Brass TFP3I2 TFP3I2 Page 2 of 4 7 1 NPT Components: 8 1-13/16 I 1 - Frame __________ 9/16 (46,0 mm) 2 - Deflector 9 (14,3 mm) ' NOMINAL 3 - Compression MAKE-IN Screw = 4 -Hook 6 5 - Strut 6 - Link Assembly 3-13/16 7 - Button _______________ (96,8 mm) THERMAL 8 - Sealing SENSING Assembly ELEMENT 9 - Ejection Spring 4 WRENCH = FLATS 3 2 TEMPERATURE RATING FIGURE 1 MODEL ESFR-25 PENDENT SPRINKLER, 25.2K EARLY SUPPRESSION, FAST RESPONSE Storage Type NFPA FM Global Open Frame (i.e., no solid shelves) Single, Double, Multiple-Row, or Portable Rack Storage of Refer to NFPA 13 Refer to FM Global Class l-IV and Group A or B Plastics Chapters 16 and 17 2-0 and 8-9 Solid Pile or Palletized Storage of Refer to NFPA 13 Refer to FM Global Class -IV and Group A or B Plastics Chapters 14 and 15 2-0 and 8-9 Idle Pallet Storage Refer to NFPA 13 Refer to FM Global Chapter 12 2-0, 8-9, and 8-24 Rubber Tire Storage Refer to NFPA 13 Refer to FM Global Chapter 18 2-0 and 8-3 Roll Paper Storage Refer to NFPA 13 Refer to FM Global 8-21 (Refer to the Standard) Chapter 19 Flammable/Ignitable Liquid Storage (Refer to the Standard) Refer to NFPA 30 Refer to FM Global 7-29 Aerosol Storage (Refer to the Standard) Refer to NFPA 30B Refer to FM Global 7-31 Automotive Components in Portable Racks Refer to NFPA 13 N/A (Control mode only; refer to the Standard) Chapter 20 N/A - Not Applicable TABLE A MODEL ESFR-25 PENDENT SPRINKLER COMMODITY SELECTION AND DESIGN CRITERIA OVERVIEW TFP3I2 Page 3 of 4 Physical Characteristics Frame .............................Brass Deflector ..........................Bronze Compression Screw ..........Stainless Steel Hook ............................MONEL Strut.............................MONEL Link Assembly................Solder, Nickel Button .............................Brass Sealing Assembly. Beryllium Nickel w/TEFLON Ejection Spring ..................INCONEL Operation The fusible link assembly is com- prised of two link halves that are joined together by a thin layer of solder. When the rated temperature is reached, the solder melts and the two link halves separate, activating the sprinkler and flowing water. Design Criteria The following general guidelines pro- vided for the TYCO Model ESFR-25 Pendent Sprinklers can be used for a quick reference. The National Fire Protection Associa- tion (NFPA) and FM Global (FM Approv- als) provide installation standards that must be used to properly design an automatic sprinkler system utilizing Early Suppression, Fast Response (ESFR) Sprinklers. The guidelines pro- vided by NFPA and FM Global may differ. Consequently, the appropri- ate standard must be used for a given installation. In all cases, the appropriate NFPA or FM Global installation standard must be referenced to ensure applicabil- ity and to obtain complete installation guidelines. The following general guidelines are not intended to provide complete installa- tion criteria. In addition to this technical data sheet, the following data sheets describe other TYCO ESFR Sprinklers: TFP315 Model ESFR-17 (TY7226) K=16.8 Pendent Sprinkler TFP316 Model ESFR-17 (TY7126) K=16.8 Upright Sprinkler TFP317 Model ESFR-17 (TY7223) K=16.8 Pendent Sprinkler TFP318 Model ESFR-1 (TY6226) K=14.0 Pendent Sprinkler TFP319 Model ESFR-14 (TY6236) K=14.0 Pendent Sprinkler System Type Wet Pipe Roof Construction Unobstructed or obstructed con- struction (e.g., smooth ceiling, bar joists, beam and girder, and so forth). Where the depths of the solid struc- tural members (e.g., beams and stem) exceed 12 inches (302 mm), install ESFR Sprinklers in each channel formed by the structural members. Ceiling Slope Maximum 2 inch rise for 12 inch run (16.7%) Maximum Coverage Area 100 ft2 (9,3 m2) In some cases, the installation stan- dards permit a greater coverage area. Minimum Coverage Area 64 ft2 (5,8 m2) per NFPA 13 / FM Global 2-0 Maximum Spacing 12 feet (3,7 m) for building heights up to 30 feet (9,1 m) 10 feet (3,1 m) for building heights greater than 30 feet (9,1 m). In some cases, installation standards permit a greater spacing. Minimum Spacing 8 feet (2,4 m) Minimum Clearance to Commodity 36 inches (914 mm) NFPA Deflector-to-Ceiling Distance 6 to 18 inches (152 to 457 mm) FM Global Centerline of Thermal Sensing Element-to-Ceiling Distance Refer to FM Global 2-0 for Storage Sprinklers. Specific Application Listing (UL) TYCO Model ESFR-25 Pendent Sprin- klers are listed by Underwriters Labo- ratories (UL) for Specific Applications with a ceiling height greater than 45 ft. (13,7 m) up to and includ- ing 48 ft. (14,6 m), and a storage arrangement up to and including 43 ft. (13,1 m), the following guide- line are provided for the TYCO Model ESFR-25 Pendent Sprinklers: Sprinkler Position Pendent: Frame arms aligned with pipe Deflectors parallel with ceiling or roof System Type Wet Pipe only Maximum Area of Coverage 100 ft2 (9,3 m2) In some cases, the installation stan- dards permit a greater coverage area. Minimum Area of Coverage 64 ft2 (5,8 m2) according to NFPA 13 Maximum Slope Ceiling 2 inch rise for 12 inch run (16.7%) Maximum Spacing lo feet (3,1 m) In some cases, the installation stan- dards permit a greater spacing. Minimum Spacing 8 feet (2,4 m) Temperature Rating 165°F (74°C) and 212°F (100°C) Deflector Distance from Walls Minimum of 4 inches (102 mm) from walls but no more than 1/2 the allow- able distance permitted between sprinklers Deflector to Top of Storage Minimum of 36 inches (914 mm) Deflector-to-Ceiling Distance 6 to 14 inches (152 to 356 mm) Maximum Ceiling Height 48 feet (14,6 m) Maximum Storage Height 43 feet (13,1 m) Storage Arrangement Palletized, solid piled, open frame, single row, or double row Commodity Class l-IV; Cartoned, unexpanded plastic Sprinkler System Design NFPA 13 for ESFR Sprinklers based upon 45 psi (3,1 bar) design pressure, 169 gpm (640 1pm) with 12 sprinkler remote area Minimum Aisle Width 5 feet (1,5 m) TFP3I2 Page 4 of 4 FITTING SIDE TOWARDS SPRINKLER FITTING WRF RE( fiGURE 2 W-TYPE I SPRINKLER WRENCH Installation TYCO Model ESFR-25 Early Suppres- sion, Fast Response 25.2K Pendent Sprinklers must be installed in accor- dance with this section. General Instructions Damage to the fusible Link Assem- bly during installation can be avoided by handling the sprinkler by the frame arms only (i.e., do not apply pressure to the fusible Link Assembly), and by using the appropriate sprinkler wrench. Failure to do so can lead to an unstable link assembly and premature activation of the sprinkler. Damaged sprinklers must be replaced. A leak-tight 1 inch NPT sprinkler joint should be obtained by applying a min- imum-to-maximum torque of 20 to 30 Ibs.-ft. (26,8 to 40,2 Nm). Higher levels of torque can distort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Note: Install the Model ESFR-25 Pendent Sprinkler in the pendent posi- tion (Ref. Figure 2). Step 1. With pipe thread sealant applied, hand-tighten the sprinkler into the sprinkler fitting. Do not apply pres- sure to the Link Assembly, and handle the Model ESFR-25 Pendent Sprinkler only by the Frame arms. Step 2. Wrench-tighten the Model ESFR-25 Pendent Sprinkler using only the W-Type 1 Sprinkler Wrench (Ref. Figure 2) and by fully engaging (seating) the wrench on the sprinkler wrench flats (Ref. Figure 1). Step 4. After installation, inspect the Link Assembly of each Model ESFR-25 Pendent Sprinkler for damage. In par- ticular, verify that the Link Assembly and Hook are positioned as illustrated in Figure 1, and that the Link Assem- bly is not bent, creased, or forced out of normal position in any way. Replace damaged sprinklers. Care and Maintenance TYCO Model ESFR-25 Early Suppres- sion, Fast Response 25.2K Pendent Sprinklers must be maintained and ser- viced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and notify all personnel who may be affected by this action. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other- wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid damage to the sprinklers before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprin- kler that has a cracked bulb or that has lost liquid from its bulb (Ref. Installa- tion section). The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the National Fire Protection Asso- ciation (e.g., NFPA 25), in addition to the standards of any authorities having jurisdiction. Contact the installing con- tractor or product manufacturer with any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Model ESFR-25 Early Sup- pression, Fast Response 25.2K Pendent Sprinklers (TY9226), (specify temperature rating), with Natural Brass finish, P/N (specify): 165°F (74°C) ..................58-441-1-165 212°F (1 00°C) ................. 58-441-1 -214 Special Order Sprinkler Assemblies with ISO 7-1 Thread Connection Specify: Model ESFR-25, Early Sup- pression, Fast Response 25.2K Pendent Sprinklers (TY9226) with ISO 7-1 thread connection, (specify temperature rating), with Natural Brass finish, P/N (specify): 165°F (74°C) .................. 58-442-1 -165 212°F (100°C) ................. 58-442-1 -214 Sprinkler Wrench Specify: W-Type 1 Sprinkler Wrench, P/N 56-872-1-025 GLOBAL HEADQUARTERS 11400 Pennbrook Parkway, Lansdale, PA 19446 I Telephone +1-215-362-0700 Copyright © 2016 Tyco Fire Products, LP. All rights reserved. tqca MONEL and INCONEL are trademark of Special Metals Corporation. Fire Protection Products TEFLON is trademark of DuPont Corporation. RIM mi Limited Warranty SprinkFLEX®.arrants that its*ducts will be free from defects in materials and workmanship under normal conditions of use and service for a period of oné year from date of sale. Our obligation under this warranty is limited to repairing or replacing any product that is returned to us with transportation charges prepaid within one year after the date of original sale and that our èxaniination shows to our satisfaction to have been defective in materials or workmanship under normal conditions of use and service. The decision as to whether to repair or to replace any product shall be made by us, and any repair shall be made àt:Our facility. Notwithstanding the foregoing, the following are specifically excluded from the coverage of this warranty: the sprinkler head of any SprinkFLEX® pr3duct, but SprinkFLEX® hereby assigns to the original purchaser of any such4product the right to enforce the warranty, if any, issued by the manufacturer of such sprinkler head; : defects resulting from ordinary wear and tear, of any SprinkFLEX® Product; products that have been altered in any manner by the buyer or by anyone other than SprinkFLEX®; products that have been subjected to misuse, abusive use, or damage by accident or casualty; products that have been installed or used in a manner contrary to our specifications, instructions or recommendation;' products that have been installed oiused in a manner that is not in compliance with all applicable requirements of any code, law, regulation or rule ofny federal, state or local governmental or industry authority; and products that have not been inspectedand.maintained in accordance with our specifications, instructions or recommendations, including, without limitation, our recommendations as to following thinspection and maintenance standards published by the National Fire Protection Association (NFPA); and products that have been affected by Microbiologically Influenced Corrosion (MIC). N This warranty is not assignable and shall benefit only the original purchaser of a SprinkFLEX® product. If any provision hereof or any portion of any provision shall be held invalid, the remainder of this Limited Warranty shall not be affected thereby, and all provisions of this Limited Warranty shall remain valid and in full force and effect to the fullest extent permitted by law, THIS WARRANTY IS IN LIEU OF ALL IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. NOTWITHSTANDING ANY PROVISION TO THE CONTRARY HEREIN OR ANY APPLICABLE LAW TO THE CONTRARY, IN NO EVENT SHALL SFRINKFLEX® BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES WHATSOEVER, WHETHER ARISING FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE ARISING FROM OR IN CONNECTION WITH THE USE OR OPERATION OF, OR ANY DEFECT IN, ANY SPRINKFLEX® PRODUCT, OR OTHERWISE. The risk of damages from any breach of warranty with respect to injury to any person will be born by the purchaser of SprinkFLEX. £ I Series SFN Unbraided Flexible Hose Assemblies C®US umn Series SFB Braided Flexible Hose Assemblies c®us APPMM LISTED SprinkFLEX® Stainless Steel Sprinkler Fittings connect the branch line to the sprinkler using a flexible stainless steel hose and reducer. The flexible stainless steel hose and fittings are intended for direct connection to the sprinkler and are particularly suited for use in suspended and hard ceiling applications. Each drop assembly comes with one stainless steel flexible hose, one branch line connection nipple, one sprinkler reducing nipple and bracket system. SYSTEM OPTIONS Pre-assembled, ready to install, unbraided and braided flexible stainless steel hose lengths: 28" (700mm), 40" (1000mm), 48" (1200mm), 59" (1500mm), 71" (1800mm) 1/2 and %"outlet fittings for connecting sprinkler Pre-assembled, ready to install mounting bracket available in 24" and 48" long Mounting bracket allows the sprinkler to be located anywhere within the ceiling with reference marks in the center for ease of installation without the need for measuring. Optional factory installed sprinkler head. TECHNICAL DATA Maximum Working Pressure: 200 psi (1375 kPa) Maximum Ambient Temperature: 300 F (149t) Connection to Branch Line: 1-inch NPT Minimum Bend Radius of Flexible Stainless Steel Hose: 3 inches (76.2 mm) per UL Listing 8 inches (203.2 mm) per FM Approval The flexible stainless steel hose should not be bent within 2'/2 inches (64 mm) of the connection nut at both ends. Equivalent lengths are shown with maximum number of 90 degree bends at the minimum bend radius. 2-45 degree or 3-30 degree bends equal 1-90 degree bend FM equivalent length calculation include sprinkler head Friction Loss. UL equivalent length calculation include the hose only. UL Maximum K-Factor of Sprinkler to be connected to Sprinkler Reducing Nipple: Y2 inch outlets: 8.0 % inch outlets: 11.2 FM Maximum K-Factor of Sprinkler to be connected to Sprinkler Reducing Nipple: '/2 inch outlets: 5.6 3/4 inch outlets: 8.0 Listings and Approvals: Unbraided models are UL Listed Braided models are FM Approved and UL Listed 1T FLEXIBLE HOSE - NON BRAIDED \\ • L C®US I1 USTED NO. DESCRIPTION NO. DESCRIPTION 1 Flexible Hose v/B" Nominal Diameter 5 Nipple 2 Ring 6 Reducer W' or 3/4I 3 Washer 7 Plastic Cap 4 Slip Nut FLEXIBLE HOSE - BRAIDED \\ - I, cuLus :- l*- i3- 1 c•_ I USTEB N'PBOVW NO. DESCRIPTION NO. DESCRIPTION 1 Flexible Hose V Nominal Diameter 5 Nipple 2 Ring 6 Reducer ,4"or%" 3 Washer 7 Braid 4 Slip Nut 8 Plastic Cap BRACKET ASSEMBLY -i ri NO DESCRIPTI o DESCRIP T10N NO 24" or 48" Support Bar Hex Screw 2 Center Bracket Assembly 5 Wing Bolt 3 Clamp MATERIAL SPECIFICATIONS Corrugated Flexible Hose: SS304 Support Bar: 690 Galvanized Steel SEAL: EPDM Clamp and Center Bracket Assembly: 690 Galvanized Steel SLIP NUT AND NIPPLE: Zinc-Plated Carbon Steel Hex Screw and Wing Bolts: Zinc-Plated Carbon Steel Slip Nut and Nipple: Zinc-Plated Carbon Steel Optional Tamper-Resistant Screw: Zinc-Plated Carbon Steel BRAID AND BRAID RING: 5S304 FRICTION LOSS DATA UNBRAIDED HOSE UL LISTED MODEL INLET & OUTLET SIZE NPT INCH LENGTH INCH (mm) UL 3" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS UL LISTED - UNBRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 40 1" DIAMETER PIPE (C=120), FT 1 x lIz 28" (700mm) 2 22 28" (700mm) 2 SFN4OH 40(1000mm) 3 39 SFN40T 1 xY4 100mm) 54 SFN48H lxVz 48 0m 3 56 SFN48T 1 48" (12 63 SFN59H 1x½ "(1 500mm 3 ) 59 SFN59T 59 (1500mm) 3 71 )1800mm) 3 1 x 3A 71(1800mm) 3 74 Series SFN models are unbraided/Series SFB models are braided Unbraided hoses are UL Listed Braided hoses are FM Approved and UL Listed BRAIDED HOSE FM APPROVED AND UL LISTED MODEL INLET & OUTLET SIZE NPT INCH LENGTH INCH (mm) UL 3" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS UL—BRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 40 1" DIAMETER PIPE (C=120), FT FM 8" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS FM—BRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 40 1 INCH DIAMETER PIPE (C=120), FT SFB28H 1 x 1/2 28" (700mm) 2 24 1 46.4 SFB28T 1 x 28" (700mm) 2 29 1 39.1 SFB40H 1 x½ 40(1000mm) 3 44 1 53.9 SFB40T 1 xY4 40)1000mm) 3 54 1 45.3 SFB48H 1 xVz 48(1200mm) 3 63 2 73.4 SFB48T 1 xY4 48" (1200mm) 3 55 2 64.3 SFB59H 1 xVz 59" (1500mm) 3 76 3 89.9 SFB59T 1 xY4 59" (1500mm) 1 3 70 3 86.5 SFB71H 1 x½ 71(1800mm) 3 78 4 112.8 SFB71T 1 xY4 71" (1800mm) 3 92 4 104.9 BRAIDED HOSE WITH ELBOW - FM APPROVED MODEL INLET & OUTLET SIZE NPT INCH LENGTH INCH (mm) FM 8" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS FM—BRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 40 1" DIAMETER PIPE (C=120), FT 1 x ½ 28" (700mm) 1 48.4 SFB2BT - E 1 X 3/4 28" (700mm) 1 SFB4OH—E 40" (1000mm) 55.9 SFB40T—E 1 X 3/4 40 )1000mm) 47.3 SFB48H—E 1x½ 48 2 75.4 SF848T—E lx % 66.3 SFB59H—E (1500mm) 91.9 SFB59T—E 3 59 (1500mm) 88.5 71" (1800mm) 4 lxYz 71)1800mm) 4 ::. 56 Lowland Street JA Holliston, MA 01746 TOLL FREE / 800-829-697511. W. ox FAX / 508-893-6020 sprinkflex@gmail corn hl~p 17M P WAX wwwsprinkflex corn -Si U APPROVED 8007957 GST 10 X CPVC 1-1/2 300 1.5 8020957 SWG 10 X CPVC 1-1/2 300 1.5 8008957 GST20 X 2-1/2 850 1.5 X 4 1475 1.5 8068925 GST20SS X 2-1/2 850 1.5 8010957 GST30 X 4 1500 1.5 X 4 1475 1.5 8009925 GST25-380 X 4 1500 1.5 8022925 SWG 25-380 X 3-1/2 - 4* 1500 1.5 8021957 SWG 20 X 2-1/2 - 3** 1250 1.5 8073925 SWG 20 SS X 2-1/2 1250 1.5 8139957 SHGST20 X 3 1050 1.5 X 4 1475 1.5 8141957 SHGST30 X 4 1500 1.5 X 4 1475 1.5 UL Max Pipe UL Test FM Max FM Test BXP/N: UL in. Load nSize, Steel Thtckness FM Pipe Thcknessjry 8038957 DSTR1 X 4 1500 0.035 X 4 1475 0.1050 8037957 DSTR 1-1/2 X 4 1500 0.035 X 4 1475 0.1050 8039957 DSTR 516 X 4 1500 0.037 X 4 1475 0.1050 8045957 DST 516 X 4 1500 0.188 X 4 1475 0.1875 8046957 TEK50 X 4 1500 0.250 X 4 1475 0.1875 8055957 SWDR 1" X 4 1500 0.037 X 4 1475 0.0600 8056957 SWDR 516 X 4 1500 0.037 X 4 1475 0.0600 8054957 SWDR 1-1/2 X 4 1500 0.037 X 4 1475 0.0600 8137957 SH DSTR 1 X 4 1500 0.035 X 4 1475 0.1050 8150922 XP 20 X 2 750 0.027 X 4 1475 0.1050 8153922 XP 35 X 3-1/2 1250 0.043 X 4 1475 0.1050 BX P/N CONCRETE FM FM Max FMTest MateraI Pipe Size Load 8059957 (61 20 X 4 1475 3000 PSI 8061957 SWC20 X 4 1475 3000 PSI * SWG 25-380 Maximum pipe size in composite wood joist allowed by UL is 3-1/2" SWG 25-380 Maximum pipe size in wood timber or joist allowed by UL is 4" ** SWG 20 Maximum pipe size in composite wood joist allowed by UL is 2-1/2" ** SWG 20 Maximum pipe size in wood timber or joist allowed by UL is 3" UL and FM tests were performed in compliance with NFPA-13 Standards. Fastening requirement: 5 times weight of water filled schedule 40 pipe plus 250 pounds. irmBuildex www.itwbuildex.com 800-284-5339 SSS26 0506 Fig. 65 Patent #4,570,885 Fig. 65 Dimensions 'Weights Rod Size Max. Rec. Approx. A B C D E F Load Lbs.* Wt./100 3/8 1 /16 3/4 1 7/16 1 610 28 1/2 11/2 3/4 1 9/16 1/4 1130 55 5/8 1/2 3/4 1 9/16 11/4 1130 55 * Max. loads for clamp with set screw in up or down position. Fig. 66 Dimensions 'Weights Rod Size Max. Rec. Approx. A B C D E F Load Lbs.* Wt./100 3/8 1 /16 11/4 1 7/16 1 610 28 1/2 1/2 1 /4 1 9/16 11/4 1130 55 5/8 1 /2 1 /4 1 9/16 1/4 1130 55 * Max. loads for clamp with set screw in up or down position. Fig. 65 and Fig. 66 Reversible C-Type Beam Clamps 3/4" and 11/41 Throat Openings Size Range - (Fig. 65 and Fig. 66) 3/8', 1/2" and 5/8" rod Material - Carbon Steel with hardened cup point set screw and jam nut Function - Recommended for hanging from steel beam where flange thickness does not exceed 3/4" (Fig. 65) or 11/4 (Fig. 66). Features - All steel construction eliminates structural deficien- cies associated with casting type beam clamps. May be used on top or bottom flange of the beam. (Beveled lip allows hanging from top flange where clearance is limited.) May be installed with set screw in up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. Open design permits inspection of thread engagement. Approvals - Underwriters' Laboratories Listed in the USA (UL) and Canada (cUL). Factory Mutual Engineering approved. Conforms to Federal Specification WW-H-171E, Type 23 and Manufacturers Standardization Society SP-69, Type 19. Exceeds requirements of the National Fire Protection Association (NFPA), Pamphlet 13, 3/8" rod will support 1/2" thru 4" pipe, 1/2" rod will support 1/2" thru 8" pipe. Finish - Plain Note - Available in Electro-Ga Ivan ized and HDG finish. Order By - Figure number, rod size and finish scs OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330 CUSTOMER SERVICE • 800.786.5266 Fig. 98 - Rod Stiffener Size Range - Secures 3/8' thru 7/8" hanger rod Material - Carbon Steel Function - Secures channel to hanger rod for vertical seismic bracing. Finish - Electro Galvanized Note - Available in HDG finish or Stainless Steel materials. Order By - Figure number Fig. 99 - All Thread Rod Cut to Length Size Range - Secures 3/8" thru 7/8" rod in 1" increments Material - Carbon Steel Maximum Temperature - 750°F Finish - Plain Note - Available in Electro-Ga Ivan ized and HDG finish or Stainless Steel materials. Order By - Figure number, rod diameter, rod length and finish Dimensions • Weights Rod Max. Rec. Load Lbs. Size For Service Temps 650°F 750°F 3/8 610 540 1/2 1130 1010 5/8 1810 1610 3/4 2710 2420 7/8 3770 3360 Fig. 100 - All Thread Rod Full Lengths Size Range - Secures 3/8" thru 7/8" rod in 10' lengths Material - Carbon Steel Maximum Temperature - 750°F Finish - Plain Note - Available in Electro-Ga Ivan ized and HDG finish or Stainless Steel materials. Order By - Figure number, rod diameter and finish Dimensions Weights Max Rec. Load Lbs. Rod For Service Temps Approx. Size 650°F 750°F Wt./100 1/4 240 215 12 3/8 610 540 29 1/2 1130 1010 53 5/8 1810 1610 84 3/4 2710 2420 123 7/8 3770 3360 169 1 4960 4420 222 1/4 8000 7140 360 1 /2 11630 10370 510 Office/Manufacturing Facility • 1375 Sampson Ave. • Corona. CA 92819 • Ph: 951.737.5599 • Fax: 951.731.0330 Customer Service • 800.786.5266 www.tolco.com Fig. 200 - "Trimline" Adjustable Band Hanger Size Range - 1/2" thru 8" pipe Material - Carbon Steel, Mu. Galvanized to G90 specifications Function - For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Features - (1/2" thru 2") Flared edges ease installation for all pipe types and protect CPVC plastic pipe from abrasion. Captured design keeps adjusting nut from separating with hanger. Hanger is easily installed around pipe. (21/21' thru 8" Spring tension on nut holds it securely in hanger before installation. Adjusting nut is easily removed. Approvals - Underwriters' Laboratories listed (1/2" thru 8") in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and Factory Mutual Engineering Approved (3/4" thru 8"). Conforms to Federal Specifications WW-H-171 E, Type 10 and Manufacturers Standardization Society SP-69, Type 10. Maximum Temperature - 650°F Finish - Mil. Galvanized. For Stainless Steel materi- als, order TOLCOTM Fig. 200 WON. Order By - Figure number and pipe size Dimensions • Weights Pipe Rod Size Max. Rec. Approx. Size Inch Metric A B Load Lbs. Length 1/2 3/8 8mm or 10mm 31/a 2/ 400 11 3/4 3/8 8mm or 10mm 31/a 21/2 400 11 1 3/8 8mm or 10mm 33/8 2/ 400 12 11/4 3/8 8mm or 10mm 33/4 2/ 400 13 1 /2 3/8 8mm or 10mm 3/ 2/ 400 14 2 3/8 8mm or 10mm 41/2 3 400 15 21/2 3/8 10mm 5 /a 41/ 600 27 3 3/8 10mm 5 /a 4 600 29 31/ 3/8 10mm 7 /a 51/4 600 34 4 3/8 10mm 7 /a 5 1000 35 5 1/2 12mm 91/ 61/4 1250 66 6 1/2 12mm 101/ 6/4 1250 73 8 1/2 12mm 131/8 8/4 1250 136 Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951737.5599 • Fax: 951.737.0330 I Customer Service • 800.786.5266 www.tolco.com Fig. 69R - Retrofit Capable Beam Clamp Retaining Strap Size Range - 3/8" and 1/2" rod; 4" thru 16" length.** Material - Pre-Galvanized Steel Function - To offer more secure fastening of various types of beam clamps to beam where danger of movement might be expected. NFPA 13 requires the use of retaining straps with all beam clamps installed in earthquake areas. Satisfies requirements of NFPA 13 (1999) 6-4.7.1. Features - Beveled locking slot* is precisely formed to align with the threaded section of a hanger rod or set screw and engage the unit securely. May be used as shown in section "A-A" or inverted. Allows easy installation for new construction or retrofit applications. Important Note - Good installation practice of a retaining strap requires that the strap be held tightly and securely to all component parts of the assembly. Therefore a locking mecha- nism of some kind, such as the beveled locking slot of the Fig. 69R or a hex nut tightened against other types of retaining straps will provide a more secure and reliable installation. Approvals - Underwriters' Laboratories listed in the USA (UL) and Canada (cUL). Approved for use with any listed beam clamp. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines. Finish - Pre-Galvanized Order By - Figure number, rod or set screw size and length Note - Minimum return on Strap: 1". * Patent #5,947,424 Dimensions • Weights Rod Size A Length 3/8" Specify 1/2" Specify Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax 951.737.0330 1 Customer Service • 800.786.5266 wwwtolco.com Fig. 25 - Surge Restrainer Size Range - One size fits 3/4" thru 2" pipe. Material - Steel Function - Designed to be used in conjunction with TOLCOTM Band Hangers to restrict the upward movement of piping as it occurs during sprinkler head activation or earthquake type activity. The surge restrainer is easily and efficiently installed by snapping into a locking position on the bank hanger. This product is intended to satisfy the requirements as indicated in the National Fire Protection Association (NFPA 13, 1999 Edition), 6-2.3.3, 6-2.3.4 and A-6i-2.3.3 Can be used to restrain either steel pipe or CPVC plastic Pipe. Approvals - Underwriters' Laboratories Listed Q.n!y when used with TOLCO band hangers Fig. 2, 2NFPA and 200, in the USA (UL) and Canada (cUL). Finish - Pre-Galvanized Order By - Figure number and TOLCO band hanger, size from 3/4" thru 2". Patent #5,344,108 - / / Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951737.5599 • Fax: 951.737.0330 Customer Service • 800.786.5266 www.tolco.com Aluminum & Stainless Steel Aluminum Aluminum channels, fittings and accessoies cffe excellent corrosion resistance and are suitable for many indoor and outdoor applications. Aluminum's hl--'h strength to weight ratio helps greatly reduce over:311 cos', of installation through ease of handling and cutting. Channels are extruded from aluminum alloy 606:-T6. Closure strips are extruded from aluminum alloy 6063-T5. Fittings ad accessories are made from alumiium alloy 5052-H32. Stainless Steel Where corrosion problems persist and other mterial and fittings are ineffective, we recommend use of corrosion resistant stainless steel channels and accessories. Channels and fittings are available n two types of stainless steel SS4-AlSl Type 304 SS6-AlSl Type 316 Fittings Most fittings, as shown in this catalog, can be supplied in aluminum or stainless steel- Consult factory for possible minimum product on quantities and set-up charges. Load Data Aluminum Channels approximate load data can be determired by multiplying load data in the steel channel section of this catalog by a ftctor of 0.38. Stainless Steel Channel load data is the same as the data in ihe steel channel section of this cataog. Metric Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in mill meters. B-Line by ET'N 177 Strut Syse:rrs Aluminum Channel & Closure Strips BIIAL Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 rn) and 20' (6.09 ml Material: Aluminum Weight: 1.06 Lbs./Ft. (1.58 kg/m) 5/8 (41.3) B22AAL BI2AL Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 ml and 20' (6.09 ml Material: Aluminum Weight: .86 Lbs./Ft. (1.28 kg/m) B24AL B22AL Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 m) and 20' (6.09 ml Material: Aluminum Weight: .66 Lbs./Ft. (0.98 kg/m) 15/81, (41.3) 'Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 rn) and 20' (6.09 rn) Material: Aluminum 'Weight: 1.18 Lbs./Ft. (1.75 kg/m) \ 31/4" (82.5) 15/8" (41.3) B54AL Thickness: .080 (2.0 mm) Standard Length: 10' (3.05 m) and 20' 16.09 ml Material: Aluminum Weight: .37 Lbs./Ft. (0.55 kg/m) 13/16" (20.6) 15/8 (41.3) Thickness: .080 (2.0 mm) 'Standard Length: 10' (3.05 m) and 20' (6.09 m) Material: Aluminum 'Weight: .52 Lbs./Ft. (0.77 kg/m) B54AAL 'Thickness: .080 (2.0 mm) 'Standard Length: 10' (3.05 m) and 20' (6.09 ml ' Material: Aluminum 'Weight: .57 Lbs./Ft. (0.84 kg/m) 15/8 " (41.3) B217AL Closure Strip Standard Length: 10' (304.8 cm) Material: Aluminum Weight: .15 Lbs./Ft. (0.23 kg/m) B217P Plastic Closure Strip Standard Length: 10' (304.8 cm) Material: PVC 'Weight: .09 Lbs./Ft. (0.14 kg/m) B217FFAL Closure Strip Standard Length: 10' (304.8 cm) Material: Aluminum Weight: .16 Lbs./Ft. (0.24 kg/m) (36.5) Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. B-Line Strut Systems 178 by ET'N Dia. Holes i:i Part No. Thickness in. mm H in. mm Wt./C Lbs./Ft. kg/rn B12H17/8 AL .105 (2.6) 2/16" (61.9) .86 (1.28) B22H17/8AL .105 (2.6) 1/8" (41.3) .66 (.98) B24H17/8AL 080 (20) 1/8 (413) 52 (77) B54H17/8 AL .080 (2.0) 13/16" (20.6) .37 (.55) Part No. Conduit or Pipe Size in. mm Material Thickness in. mm Design Load Lbs. kN Wt./C Lbs. kg B2001 AL /8" (10) .063 (1.6) 180 (.80) 4 (1.8) B2008 AL 1/2" (15) .063 (1.6) 180 (.80) 4' (1.8) B2009 AL 3/4 (20) 080 (20) 270 (1.'20) 6 (27) B2010 AL 1" (25) .080 (2.0) 270 (1.20) 7 (3.2) B2011 AL 11/4 (32) 080 (2.0) 270 (1.2o) 8 (3.6) 82012 AL 11/2" (40) .100 (2.5) 360 (1.60) 11 (5.0) B2013 AL 2 (50) 100 (25) 360 (1.60) 12 (54) B2014 AL 21/2" (65) .100 (2.5) 360 (1.60) 13 (5.9) B2015 AL 3" (80) .100 (2.5) 360 (1.60) 16 (7.2) B2016 AL 31/2" (90) .125 (3.2) 450 (2.00) 22 (10.0) B2017 AL 4 (100) 125 (3.2) 450 (2.00) 24 (10.9)' B2018 AL 41/2" (115) .125 (3.2) 450 (2.00) 26 (11.8) B2019 AL (125) .125 (3.2) 450 (00) 27(12.2) B2020 AL (150) .125 (3.2) 450 (2.00) 33 (14.9) Aluminum - SH Type Channel Material: Aluminum ca 2" TYP. Ej (50.8) Hj K06 Type Knockout Channel Material: Aluminum 6" (152.4) 3" H (22.2) Dia. KO x 11/8" Slots (14.2) (28.6) Thickness H Wt./C Part No. in. mm in. mm Lbs./Ft. kg/rn 12SF!AL_ .1 05 (2.6) B22SH AL .105 (2.6) 1I8" (41.3) .6:3 (.93) B24SHAL .080 (2.0) 1/8" (41.3) .49 (.73) B54SH AL .080 (2.0) 13/16" (20.6) .34 (.50) H-17/8 Type Channel Material: Aluminum Thickness H Wt./C Part No. in. mm in. mm Lbs/Ft. kg/rn [B12K06AL .i05(2 27/16" (61.9) 6 (1.28) B22K06 AL .105 (2.6) 1/8" (41.3) .66 (.98) B24KO6AL .080 (2.0) 15/ 413) 52 (77) 1 .37 (.56) B54K06 AL .080 (2.0) 13/16" (20.6) B2000 Series Rigid Conduit Clamps Safety Factor of 5 Machine Screw and Square Nut included Pipe clamp material 5052-H32 Design Load Reference page 177 for general fitting specifications. Other channel combinations availEble-see steel section for styles. B-Line by 179 Strut Systems Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. Strut Systems 180 Aluminum Aluminum Fittings Most fittings, as shown in this catalog, can be supplied in aluminum. See "Fittings" section (page 73) of this catalog. Consult factory for possible minimum production quantities and set-up charges. Channel Nuts We recommend the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength and slip resistance, use the channel nut information provided on pg. 51 & 52. A (.70) multiplier is to be applied to obtain the appropriate derated values for aluminum channel. Spring Nut Nut Without Spring Nuts for B12 Channel Part Number With Without Thread Thickness Wt.IC Spring Spring Size in. mm Lbs. kg N724SS6 N224W0SS6 1/4"..20 1/4" (6.3) 6.6 (3.0 N728S56 N228W05S6 - /8"-16 /8" (9.5) 10.6 (4.8) N725556 N225W0SS6 1/2"..13 /8" (9.5) 9.7 (4.4) Nuts for B22, B24 Channels Part Number With Without Thread Thickness Wt./C Spring Spring Size in. mm Lbs. kg N224SS6 N224W0S56 1/4"20 1/4" (6.3) 6.6 (3.0) N228S56 N228W0556 3/8"-16 /8 (9.5) 10.6 (48) N225556 N225W0SS6 1/2"..13 /8" (9.5) 9.7 (4.4) Nuts for B54 Channel Part Number With Without Thread Thickness Wt.IC Spring Spring Size in. mm Lbs. kg N524SS6 N224W0SS6 1/4"20 1/4" (6.3) 6.6 (3.0) N528S56 N22BWOSS6 3/8"-16 - - /8" (9.5) 10.6 (4.8) N525SS6 N525W0556 1/2".13 /" (9.5) 9.7 (4.4) (41.3) 15/81, (41.3) 15/8" (41.3) (25.4) 13/16" (20.6) 13/16" (20.6) 2" Typ. X /8" Slots H (14.2) (22.2) Part No. Thickness in. mm H in. mm Wt.IC Lbs./Ft. kg/rn B22SHSS4 12 Ga. (2.6) 1/8" (41.3) 1.82 (2.70) B22SH SS6 12 Ga. (2.6) 1/8" (41.3) 1.82 (2.70) B24SH SS4 14 Ga (1.9) 1/ (41.3) 1.34 (1.99) B24SHSS6 14 Ga. (1.9) 1/8" (41.3) 1.34 (1.99) B32SH SS4 12 Ga (2.6) 13/8" (34.9) 1.62 (2.4-1) B42SH SS4 12 Ga. (2.6) 1" (25.41 1.36 (2.02) B52SH SS4 12 Ga. (2.6) 13/16" (20.6) 1.23 (1.83) B52SH SS6 12 Ga. (2.6) 13/16" (20.6) 1.23 (1.83) B54SH SS4 14 Ga. (1.9) 13/16" (20.6) .91 (1.35) B54SH SS6 14 Ga. (1.9) 1 3/16" (20.6) .91 (1.35) Dia. Holes I. Part No. Thickness in. mm H in. mm Wt./C Lbs./Ft. kg/rn B22H17/8SS4 12 Ga. (2.6) 1/8" (41.3) 1.85 (2.75) B22H17/8SS6 12 Ga. (2.6) 1/8" (41.3) 1.85 (2.75) B24H17/8 SS4 14 Ga (1.9) 1 /8 (4'1.3)' 1.36 (202) B24H17/8SS6 14 Ga. (1.9) 1/8" (41.3) 1.36 (2.02) B32H17/8SS4 12 Ga. (2.6) 1/8" (34:9) 1.65 (2.45) B42H17/8SS4 12 Ga. (2.6) 1" (25.4) 1.39 (2.07) B54H17/8 SS4 14 Ga. (1.9) 13/16" (20.6) .93 (1.38) B54H17/8SS6 14 Ga. (1.9) 13/16" (20.6) .93 (1.38) Stainless Steel B22SS* B24SS* *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' (3.05 m) and 20' (6.09 ml Material: SS4, SS6 Weight: 1.90 Lbs./Ft. (2.83 kg/m) B32SS4 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' (3.05 m) and 20' (6.09 ml Material: SS4 Weight: 1.70 Lbs./Ft. (2.53 kg/m) IN 1/8" I'N (34.9) 1/8" (41.3) *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 14 Ga. (1.9 mm) Standard Length: 10' (3.05 m) and 20' (6.09 ml Material: SS4, SS6 Weight: 1.40 Lbs./Ft. (2.08 kg/m) B42SS4 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' (3.05 ml and 20' (6.09 m) Material: SS4 Weight: 1.44 Lbs./Ft. (2.14 kg/m) B52SS* *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' (3.05 ml and 20' (6.09 rn) Material: SS4, SS6 Weight: 1.27 Lbs./Ft. (1.89 kg/m) SH Type Channel / B54SS* *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 'Thickness: 14 Ga. (1.9 mm) Standard Length: 10' (3.05 ml and 20' (6.09 ml Material: SS4, SS6 Weight: .97 Lbs./Ft. (1.44 kg/m) H-il/S Type Channel Reference page 177 for genera) fitting specifications. Other channel combinations available-see steel section for styles. B-Line by E'I'4U 181 Strut Systems Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. Strut Systems 182 B-Line by Et'N Stainless Steel Stainless Steel Fittings Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See "Fittings" section (page 73) of this catalog. Consult factory for possible minimum production quantities and set-up charges. B2000 Series Pipe & Tubing Clamps Safety Factor of 5 Combination Recess Hex Head Machine Screw and Square Nut included Material: Stainless Steel Type 304 & 316 Design Load Conduit or Material Design Part No. Pipe Size Thickness Load Wt./C in. mm in. mm Lbs. kN Lbs. kg :B2001 SS4 318" (IC) 16 Ga. (1.5) 400 (1.78) 10 B2008 SS4 1/2" (15) 16 Ga. (1.5) 400 (1.78) 11 (5.0) ,B2009SS4 /4"(20) 14 Ga. (1.9) 600 67) jj :8J B2010 SS4 1" (25) 14 Ga. (1.9) 600 (2.67) 16 (7.2) B2011 SS4 11/4 (32) 14 Ga. (1.9) 600 (2.67) 20 (9.1) B2012 SS4 11/2" (40) 12 Ga. (2.6) 800 (3.56) 30 113.61 B2013 SS4 2" (50) 12 Ga .(2.6) - 800 (56) 115.411 B2014 SS4 21/2 (65) 12 Ga. (2.6) 800 (3.56) 38 117.21 B2015 SS4 3 (80) 12 Ga (26) 800 13 56) 44 (19 fl B2016 SS4 31/2 (90) 12 Ga. (2.6) 1000 (4.45) 51 (23.1) B2017 SS4 4 (100) 12 (26) Ga 1000 (445) 55 (24 9) B2018 SS4 41/2" (115) 12 Ga. (2.6) 1000 (4.45) 59 (26.7) B2019. SS4 5 (125) 12 Ga (26) 1000 (445) 64 (29.0)- B2020 SS4 6" (150) 1 12 Ga. (2.6) 1 1000 (4.45) 80 (36.3) Channel Nuts For Channel Nuts pull-out strength and slip resistance, use the data shown on pages 50 & 51. Note: Reduce slip load by 50% due to hardness of material. IV 1:~V Spring Nut Nut Without Spring Nuts for B22, B24, B32 Channels Part Number With Without Thread Thickness Wt./C Spring I Spring Size in. mm Lbs.kg N224SS6 N224W0SS6 1/4"20 1/4" (6.3) 6.6 (3.0) N228SS6 N228W0SS6 3[8'-'-1 6 /8 (9.5) 10.6 (4.8) N225SS6 N225W0SS6 1/2"..13 /8"(9.5) 9.7 (4.4) Nuts for B42, B52, B54 Channels Part Number With Without Thread Thickness Wt./C Spring _Spring J Size in. mm Lbs. kg N5245S6 N224W0SS6 1/4"20 1/4" (6.3) 6.6 (3.0) N528SS6 - N228W0SS6 /8"-16 /" (9.5) 10.6 (4.8) N525SS6 N225W0SS6 1/2"..13 /8" (9.5) 9.7 (4.4) Threaded Accessories HN - Standard Hex Nut (TOLCO Fig. 113) eTc .ca Size Range: 1/4"..20 thru /8"-9 - Material: Steel Finish: Plain or Electro-Ga Ivan ized. Contact B-Line for alternative finishes and materials. Order By: Figure number size and finish Part For WidthAcross WidthAcross Approx. Number Rod Size Flats Points Thickness 00 W000 in. (mm) in. (mm) in. (mm) lbs. (kg) HN 1/4 l/".Q 11k" (127) /32" (5.7) 0.1 (0.3)J HN-3 31t"-16 9A6" (14.3) 21/32" (16.6) 21/64" (8.3) 1.6 (0.7) HN1I2 ½13 3/4 (190) /64 (218) 7/16" (1-1. HN-5 5j"-11 15A6° (23.8) 1/32" (27.8) IM" (13.9) 7.3 (3.3) HN 3/4 3A10 - 1½ (286) 1/ie (333) 41/M (163) - 20(541] HN-7/8 1N-9 1,46" (33.3) 1 /64" (38.5) 3/4" (19.0) 19.0 (8.6) HHN - Heavy Hex Nut (TOLCO Fig. 114) Size Range: 1/4"..20 thru 7/8 09 Material: Steel Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes and materials. Order By: Figure number size and finish Part For Width Across Width Across Approx. Number Rod Size Flats Points Thickness Wt/100 in. (mm) in. (mm) in. (mm) lbs. (kg) HHN-1/4 1/4"_20 W (12.7) /64 (14.7) 15/64" (5.9) - 1.2 (0.5) HHN-3/8 3W-16 11,16" (17.5) 51/64" (20.2) 23/64 (9.1) 3.1 (1.4) HHN-1/2 ½"-13 (22.2) 1W (28.6) 31/64" (12.3) 6.5 (2.9) HHN-5/e ½-il i/i6' (27.0) 11%4" (31.3) /64" (15.5) 12.0 (5.4) HHN 3/4 3W 10 i'/4 (317) 129W (369) /64 (186) 190 (86) H11N-1/a 7,'W-9 1A6" (36.5) 121At (42.6) /64' (21.8) 30.0 (13.6) B-Line by ET41 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 102 Fire Protection Solutions b Threaded Accessories ®TOLcd -- ( AN - Flat Washer (TOLCO Fig. 115) Size Range: 1/4°20 thru V-8 rods Material: Steel Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes and materials. Order By: Figure number size and finish Part For Outside Approx. Number Rod Size Diameter W000 in. (mm) lbs. (kg) FW-V4 1/4 -20 3/4 (19.0) jpJ 1° (25.4) 3.9 (1.7) FW 1/2 ½ 67 (30)J FIN-5/8 W-11 13/4 (44.4) 7.3 (3.3) - FVP/4 ~10 JQL_ 11.0 (50)j RN-1/e 7N-9 2'/4° (57.1) 19.0 (8.6) FW-1 1°-8 21h' (69.8) 22.0 (10.0) LW - Lock Washer (TOLCO Fig. 111) Size Range: 1/4°..20 thru 1°-8 rods Material: Steel Finish: Plain or Electro-Galvanized. Note: Available in Hot Dip Galvanized finish or Stainless Steel materials. Order By: Figure number size and finish Part Number For Rod Size Outside Diameter in. (mm) Approx. Wi/lOU lbs. (kg) LW-1/4 ¼°-20 490 (12.4) 0.3 (0.13) LW-3/s ,°-16 .681 (17.3) 0.6 (0.27) LW-1/2- .1h'-13 88 (223) 13 (059) LW-518 5N-ii 1.08° (27.4) 2.4 (1.09) LW-3/4 3/4"-10 1.27° (32.2) 3.8 (1.72) LW-1/8 7i°-9 1.46° (37.1) 5.9 (2.67) LW-1 1°-8 1.66" (42.1) 8.8 (3.99) FAN - Flat Fender Washer (TOLCO Fig. 119) Size Range: /8°-16 and 1/2°13 rods Material: Steel Function: To provide a greater bearing surface than standard washer. Finish: Plain or Electro-Ga Ivan ized. Contact B-Line for alternative finishes and materials. Order By: Figure number and size Part For Inside Outside Approx. Number Rod Size Diameter Diameter Wt/100 in. (mm) in. (mm) lbs. (kg) FFW-3 W-16 ½" (12.7) 1 1 (28.6) 3.0 (1.3) FAN-'tz ½-13 906 (14.3) 2 (50.8) 2.8 (1.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Fire Protection Solutions 103 B-Line by ET'N