Loading...
HomeMy WebLinkAbout1917 PALOMAR OAKS WAY; ; FPC2018-0345; PermitPERMIT REPORT (City of Carlsbad Print Date: 01/12/2022 Permit No: FPC2018-0345 Job Address: 1917 PALOMAR OAKS WAY, CARLSBAD, CA 92008-5512 Status: Closed - Finaled Permit Type: FIRE-Construction Commercial Work Class: Fire Alarm Parcel #: Track U: Applied: 10/18/2018 Valuation: $0.00 Lot U: Issued: 11/05/2018 Occupancy Group: Project U: Finaled Close Out: 01/14/2020 #of Dwelling Units: Plan U: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check U: Inspector: Plan Check U: Final Inspection: Project Title: Description: WASATCH CORNERSTONE - FIRE ALARM REPLACE MXL IQ PANEL WITH NEW XLS PANEL Applicant: FPContractor: SIEMENS SIEMENS INDUSTRY INC CHRIS BISCHEL P0 BOX 80600 10100 WILLOW CREEK RD INDIANAPOLIS, IN 46280-0600 SAN DIEGO, CA 92131-1636 (630) 857-2100 (858) 265-9894 FEE AMOUNT FIRE TI Fire Alarm System $620.00 Total Fees: $620.00 Total Payments To Date: $620.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 1 760-602-8561 f I www.carlsbadca.gov SIEMENS Industry, Inc. 10100 Willow Creek Rd San Diego, Ca 92131 Phone: 858-880-2085 Fax: 855-866-7942 Wasatch Cornerstone MXL to XLS Migration 1917 Palomar Oaks Way Carlsbad, CA 92008 FPC20I8-0345 1917 Palomar Oaks WAY WASATCH CORNERSTONE - FIRE ALARM REPLACE MXL 0 PANEL WITH NEW XLS PANEL 10/2212018 FPC20I8-0345 V Modular assembly Supervised remote printer 32-character custom messages 40 programmable macro, function buttons Thermal strip printer Security-device monitoring (®UL 1076 Listed) Sprinkler Supervision Degrade-mode operation User help screens Coded outputs Distributed processing UUKL Listed for smoke control ®UL 864 9th Edition Listed & OULC Listed; FM, CSFM & NYC Fire Dept. Approved - UUFLU by all rite Salety Management Stations Multiple command stations Menu-driven operator commands 5000-event, history-logging capability with on-line and off-line reports Multiple levels of password protection Automatic environmental compensation for smoke detectors Alarm verification by device or zone I Pre-alarm operation Logic-controlled output functions Time-based-controlled output functions Holiday schedule City tie! leased line 200 notification-appliance-circuits (NACs) capacity Up to 3.0 amps (24VDC) per NAC Built-in strobe synchronization protocol Supports pre-action, deluge and agent releasing Voice evacuation system (optional) NEC 760 power-limited circuits (®UL 864 Compliant) Intelligent interface to building! process management systems Operates as interactive peer with other XLS or XLSV units in a XNET network Detector Sensitivity Readout! Printout perNFPA72 SIEMENS Data Sheet Fire Safety Products FireFinder® XLS Advanced Fire Alarm Control Panel ARCHITECT AND ENGINEER SPECIFICATIONS Standard! 2500-point-capacity - addressable fire-alarm control panel (FACP) Ability to network with other FireFinder XLS systems Powerful, easy-to-use programming capabilities Fully field programmable, via Windows® laptop PC 6(15.2 cm), backlit LCD display User-friendly system interface Touch screen for maintenance operations and function keys Global annunciation and control capability Multi-language display Universal AC power input: 120VAC - 240VAC @ 50/60Hz l2 amps of system power (expandable to 48 amps) Numerous Relays: Alarm, Trouble, Programmable, etc. Sure Wir&1" addressable-loop technology Polarity-insensitive detection circuits (patented) Useful diagnostic LEDs on all cards Supports FirePrintTm application-specific detection Intelligent/analog detection circuits: 'Class A' or'Class B' Supports single-person 'Walk Test' Seismic certified 1' System Overview FireFinder XLS is a microprocessor-based, advanced fire-safety system that has a 6' display and large, lighted buttons; making it a highly intuitive fire-alarm user interlace. Additionally, each FireFinder XLS panel has a unique multiprocessor 'Network design - as well as providing connectivity to detection devices. FireFinder XLS is ideally suited for commercial, institutional and industrial fire detection and notification applications. This FACP complies with the requirements of NFPA Standard 72, and is listed by Underwriters Laboratories under their ®UL 864 standard. Underwriters Laboratories of Canada also lists FireFinder XLS FACP5 under tULC-S527. SIEMENS Industry, Inc. Building Technologies Division FireFinder XLS is Factory Mutual (FM 43010) Approved; as well as California State Fire Marshals (CSFM 07165- 0067:0222) and NYC Fire Department (4t6160) Approved. Additionally, FireFinder XLS is ®UL Listed under the category UUKL for smoke control. FireFinder XLS is also ®UL Listed and FM Approved for Sinorix® clean-agent systems and pre-action or deluge sprinkler systems, which include foam or water applications. FireFinder XLS operates on the releasing requirements specified in NFPA 13 and 2001. FireFinder XLS is listed as a Fireman's Smoke Control Station in high-rise office buildings, malls and other large structures. FireFinder® XLS System Overview 6300 System Overview - (continued) The FireFinder XLS system has been seismic qualified in accordance with: International Building Code, 2006 Edition California Building Code, 2007 Edition ASCE Standard 7, 2005 Edition OSHPD, OSP-0057-10 OSHPD CAN 2-1708A.5, Rev. 3 ICC-ES AC 156, effective 1/1/2007 System Components A basic FireFinder XLS FACP consists of the following sub- assemblies: Person Machine Interface (Model PMI-2); Power Supply (Model PSC-i 2); Device Loop Card (Model DLC); Zone Indicating Card (Model ZIC-4A); Card Cage (Model CC-5); Inner Door Blank Single Plate (Model ID-SP); CAB-1, CAB-2 or CAB-3 enclosures. Optional modules that can be installed with this FACP include: Card Cage (Model CC-2); Network Interface Card (Model NIC-C); 8-Circuit Zone Indicating Card (Models ZIC- 813 I Z[C-20; Control Relay Card (Model CRC-6); Output Control Module (Model OCM-16); Switch Control Module (Model SCM-8); LED Control Module (Model LCM-8); Fan Control Module (Model FCM-6); Supervised Input Module (Model SIM-16); Power Supply Extender (Model. PSX-12); Remote Network Interface (Model RNI); Remote Printer Module (Model RPM); System Status Display (Model SSD); Multi-Point Digital Alarm Communicator (Model MDACT); Two-Module Remote Enclosure (Model REMBOX2); Four-Module Remote Enclosure (Model REMBOX4). FireFinder XLS is compatible with a full line of intelligent initiating devices, highlighted by the FirePrint application- specified detectors: Models HFP-1 1 and HFPT-1 1. FireFinder XLS functions with the Siemens Fire Safety portfolio of graphics command centers. Fire Safety Management Stations - XLS Compatible FireFinder XLS Compatibility with Siemens Fire Safety Management Stations FireFinder XLS panels are compatible with Siemens Fire Safety Management Stations, which provide integrated and reliable FACP monitoring and control of XLS system events - including: Alarm, Trouble, Security and Supervisory commands. Each management station includes PC-,based, color- graphics software designed for use with the XNET network, offering full control and annunciation. An extensive history log of all XLS-FACP events, as well as extensive report-generation capabilities, is easily maintained. Additionally, user-programmable function buttons allow site-specific control functions. SIEMENS Industry, Inc. Building Technologies Division PMI-3 -*Person Machine Interface 3 PMI-3 - Person Machine Interface 3 The Person Machine Interface 3 (Model PMI-3) is the primary user interface and central microprocessor for each FireFinder FACP. Additionally, Model PMI-3 serves as both operator interface and central microprocessor for each XLS. Enhancements to the third version of the Person Machine Interface include go-to-beginning, go-to-end queue buttons; a front-end command screen with Alarm I Supervisory I Trouble light-emitting diodes (LEDs), and three (3) types of alternate-language overlays orderable in a single (1) part. (see: Details for Ordering section below for more info.) FireFinder XLS FACPs are controlled and operated from Model PMI-3, which uses large, lighted buttons to prompt the end-user to the next available, correct system operation (i.e. - Acknowledge I Silence I Unsilence I Audible I Reset). The controller in Model PMI-3 provides a 6" (15.2 cm.) front- end touch screen comprised of system-status LEDs as well as a liquid-crystal display (LCD) of 1200 -x-800 pixels. There are overlays that provide naming in alternate languages for visual indicators found on the front of each Model PMI-3. Each overlay is assigned on the outer assembly, respectively, when affixed to the display on the user interface. Model PMI-3 contains the site-specific program configuration created in the software tool, Zeus. ZIC-4A -*Zone Indicating Card ZIC-4A Zone Indicating Card The Zone Indicating Card (Model ZlC-4A) provides four (4) fully supervised, programmable output circuits for use on each FireFinder XLS. Model ZlC-4A supplies four (4) 'Class B' (Style Y) or 'Class A' (Style Z) type output circuits, power limited to 3.0 amps maximum per circuit. Each circuit for Model ZlC-4A can be independently programmed for use with listed audible or visual notification appliances; listed emergency audio speakers; municipal tie boxes; leased lines, or as releasing circuits. FireFinder XLS Components - (cont.'d) Model ZIC-4A plugs into one (1) slot in the Model CC-5 or Model CC-2 card cage, and has on-board LEDs for system status and troubleshooting. Indication of power, communication, internal operation, and ground-fault conditions are provided, as well as indication of circuit activation or Trouble conditions. ZIC-8B I ZIC-2C -* Zone Indicating Cards ZIC-8B I ZIC-2C The Zone Indicating Card (Model ZIC-813) provides eight (8) fully supervised, programmable output circuits for use on FireFinder XLS. Model ZIC-813 supplies eight (8) 'Class B' (Style Y) type output circuits, power limited to 2.0 amps maximum per circuit. Each circuit can be independently programmed for use with listed audible or visual notification appliances, or listed emergency audio speakers. Model ZIC- 813 plugs into one (1) slot in the Model CC-5 or Model CC-2 card cage, and has on-board LEDs for system status. Model ZIC-2C mounts directly on Model ZJC-813, and allows each of the Model ZIC-813 output circuits to be used for two-channel voice applications. Indication of power, communication, internal operation, and ground-fault conditions are provided, as well as indication of circuit activation or Trouble conditions. DLC Device Lopp Card The Device Loop Card (Model DLC) is the interface for connection with FireFinder XLS detectors and initiating devices - including manual stations, control and input devices. Model DLC plugs into one (1) slot of the CC-2 or CC- 5 card cage. Programming Model DLC is accomplished using the FireFinder XLS system-programming tool, Zeus. Model DLC takes one (1) address on the network, and communicates with two (2) device circuits for a total of 252 detectors and devices. Model DLC has 12 LEDs for diagnostic purposes, and provides ground-fault detection and zone- isolation circuitry. NIC-C Network Interface Card The Network Interface Card (Model NIC-C) provides HNET or XNET network communications between enclosures. In addition to the HNET or XNET communication, Model NIC-C provides CAN network communication within an enclosure or external to the enclosure. HNET or XNET communication can be wired Style 4 or Style 7, but the CAN network can be wired Style 4 only. When used for HNET communications, Model NIC-C provides contact between enclosures on a single system. When Model NIC-C is used for XNET communications, Model NIC-C provides communication between systems. The maximum of XNET Model NIC-C cards on a single system (single node) is one (1), for a total of 64 XNET Model N IC-C cards on a peer-to-peer networked system. Model NIC-C has diagnostic LEDs that indicate: Card Fail, CAN Fail, HNET Fail, XNET Fail, Ground Fault, Loop 'A' Fail and Loop 'B' Fail. Model NIC-C Card also has LEDs to indicate Power, Style and Active Networks. I fm HCP -* Control Point Module HCP Control Point Module Model HCP provides an intelligent control point for the FireFinder XLS. Model HCP can be programmed as an independent, remotely located telephone zone, speaker zone or notification appliance circuit. Model HCP is designed to be used with the Siemens - Fire Safety Alarm Signaling Devices product line. Model HCP communicates through the Model DLC analog loop, and can be wired either 'Class A' (Style Z) or 'Class B' (Style Y). The 24 VDC power input comes from either the control panel or from any ®UL Listed power-limited, auxiliary power supply. MLC -* MXL Line Card [for FireFinder XLS] SIEMENS Industry, Inc. —3 — Building Technologies Division FireFinder XLS Components - (cont.'d) MLC - MXL Line Card [for FireFinder XLS] The MXL Line Card (Model MLC) is an optional card for the FireFinder, XLS panel that supplies two (2) intelligent analog circuits, utilizing the Model ' I ' series; Model ' ID ' series; Model IL ' series or Model ' FP series-type intelligent devices. Model MLC occupies two (2) addresses on the HNET network, ard devices connected to the Model MLC circuits are dynamically supervised by FireFinder XLS through the use of a unique communications protocol. CRC-6 Controllable Relay Card The Controllable Relay Card (Model CRC-6), Model CRC-6, is designed to provide auxiliary control of building functions, such as: door-holder release, elevator capture, smoke control, lock release, etc. Model CRC-6 plugs into one (1) slot in the Model CC-5 or Model CC-2 card cage. Model CRC-6 provides six (6), fully programmable relays. Each relay contains one (1) set of SPDT contacts rated at 4 Amps 30 VDC I 120VAC resistive and 3.5 amps 120VAC inductive (0.6 P.F.) NRC —* Network Ring Card NRC Network Ring Card — Second Generation Model NRC, which is the 2nd generation of Model NRC, is a networking ring card that transmits single-mode or multi- mode network communication via fiber-optic or copper lines. Each card uses a 'Class A' (Style 7) ring configuation for connection with each FireFinder XLS FACP. One (1) Model NRC (per system node) provides XNET, peer- to-peer communication between FireFinder XLS FACPs, allowing a max, 64, XLS FACPs to be networked together. CDC-4 —Conventional Detector Card CDC-4 Conventional Detector Card The Conventional Detector Card (Model CDC-4) is used to monitor Siemens Fire Safety conventional detectors on the FireFinder XLS system. Model CDC-4 can be used in applications where conventional detectors are more suited than addressable detectors, such as hallways or large meeting rooms. Also, Model CDC-4 can be used to upgrade Siemens conventional fire-alarm panels to the FireFinder XLS system without requiring detector replacement. SIEMENS Industry, Inc. Building Technologies Division SIM-16 -3 Supervised Input Module SIM-1 6 Supervised Input Module The Supervised input Module (Model SIM-1 6) is a remotely located, general-purpose input module. Model SIM-1 6 provides 16 input circuits for remote system monitoring. Each input can be individually programmed as supervised (dry- contact only) or unsupervised (general-purpose input.) Model SIM-1 6 has two (2) 'Form C' relays. The relays and inputs are programmed using the Zeus system software- programming tool. FCM-6 -* Fan, Motor, Dampers Control Module FCM-6 Fan, Motor, Dampers Control Module The Fan. Motor, Dampers Control Module (Model FCM-6) is a FireFinder XLS command-console option module that provides manual control of building HVAC system fans, motors, and dampers. Each Model FCM-6 module provides six (6) sets of three (3) push-button switches for manual- system control. Each switch has three (3), associated LEDs to indicate Fan I Damper / Motor status: OFF (RED LED), ON (GREEN LED), Trouble (YELLOW LED). 0 MIA VNTPC -* Virtual Network Tunnel VNTPC Virtual Network Tunnel The Virtual Network luhnel (VNT) is an efficient means for real- time communication, as well as providing support to HNET, XNET and DNET monitoring and supervision — when used as part of a Fire Command Center or a Building network. Each Model VNTPC is a fanless, headless industrial computer, receiving its operating power from an XLS/V panel. FireFinder XLS Components —(cont.'d) CC-2 —Card Cage-2 Slots CC-5 -*Card Cage-5 Slots CC-5 I CC-2 Card Cages The Models CC-5 I CC-2 card cages provide the physical mounting location and all wiring connection points for all fire-and-voice system options cards for the FireFinder XLS system. Model CC-5 has five (5) slots, while Model CC-2 has two (2) slots. All cards plugged into the CC-5 I CC-2 card cage communicate with other FireFinder XLS modules via a common data bus. Connectors are provided on the left and right side of the CC-5 to connect a 60-pin cable for communications with the FireFinder XLS operator interface, power supplies and amplifiers modules. Field wiring to devices and circuits terminates on the Models CC-5 I CC-2 card cages. All cards designed for use with the Models CC-5 I CC-2 route their field wiring terminations to the 'top' of the Model CC-5 I CC-2 card cages. These connections are all power limited. Internal wiring connections distribute 24VDC to cards or high-level audio signals (depending on application used) connect to the 'bottom' of the Model CC-5 / CC-2 card cages. These connections are all non-power limited. All wiring connections to the Model CC-5 / CC-2 card cages are to removable terminal blocks. Terminal blocks are rated for use with wire sized 12 American Wire Gauge (AWG) to 24AWG. Each connector is numbered to make wiring terminations to the correct position on the terminal block simple in order to reduce potential wiring errors. SCM-8 -* Switch Control Module SCM-8 Switch Control Module The Switch Control Module (Model SCM-8) is a FireFinder XLS-option module that provides manual control to the Emergency Voice Evacuation System (EVAC) or manual fire-system control. Each Model SCM-8 module provides eight (8) momentary push-button switches and 16 light-emitting diodes (LEDs) to indicate their status. Each switch is assigned two (2) LEDs, as well as a label to indicate the switch's programmed usage. The label slides behind a clear protective membrane. One set of LEDs assigned to each switch is a dual-colored LED, which is used to indicate what type of signal is active. SIEMENS Industry, Inc. 5 Building Technologies Division Each Model SCM-8 switch is fully programmable, and may be used to control speaker circuits and a wide range of general-system functions such as: All Call, All Evac, Warden's Page, Speaker, etc. Any number of circuits may be grouped and controlled by a single switch. Switch usages and zone groupings are assigned using the Zeus system software-programming software. Model SCM-8 modules are mounted on a hinged panel, as a part of the FireFinder XLS Command Console enclosure. LCM-8 - LED Control Module LCM-8 LED Control Module The LED Control Module (Model LCM-8) is a FireFinder XLS-option module that provides LED annunciation for FireFinder XLS system activity. Each Model LCM-8 contains eight (8) groups of two (2) LEDs - each of which can be assigned to desired outputs using the Zeus system software-programming tool. Eight (8) LEDs are dual-color capable (Red or Green I flashing or steady). The remaining LEDs are Amber flashing or steady. A space is provided for labeling of LED functions. The label slides behind a clear, protective membrane. Model LCM-8 dimensions are identical to Model SCM-8, and Model LCM-8 is mounted on the same hinged panel, as a part of the FireFinder XLS Command Console enclosure. RNI -* Remote Network Interface RNI Remote Network Interface The Remote Network Interface (Model RN!) provides a connection point for use with equipment mounted in a remote-lobby enclosure on the FireFinder XLS FACP. Model RNI is used to provide additional input, output and control features to the system remotely, via the main FACP. These additional features may include control switches and indicators: (Models SCM-8, LCM-8 and FCM-6), remote-emergency paging microphones or telephones: (Models LVM, FMT), or controls used in graphic annunciators (Models SIM-i 6, 0CM-1 6) or system-status display with the ability to acknowledge alarms, silence audibles and reset the system (Model SSD-C-REM). Model RN! allows The Person Machine Interface to be mounted in the Model REMBOX2 or Model REMBOX4 remote lobby enclosure. FireFinder XLS Components - (cont.'d) 111111 'MIlD g $019140 11111111 uIluI II 0' II 01fl40 II Iuiffi II Ill JI 'I, Ill II I II iiIii Ii II PSC-12 -* Power Supply Charger Module PSC-12 Power Supply Charger Module The Power Supply Charger Module (Model PSC-12) is a high-current power supply that provides the FireFinder XLS primary-regulated 24VDC power to operate. Model PSC-12 is rated at 12Amps (Alarm) / 5Amps (Standby), and has a built-in battery charger, capable of charging up to 100 AH batteries. Model PSC-12 is an addressable- intelligent, microprocessor-controlled module that communicates its status to the system-operator interface. Each Person Machine Interface is then able to query the status of the power supply to obtain data regarding system-charging current, terminal-loading information, ground-fault conditions and more. PSX-1 2 -* Power Supply Extender PSX-12 Power Supply Extender The Power Supply Extender (Model PSX-1 2) is a high-current, auxiliary power supply that expands the main Model PSC-1 2 power supply and battery charger of the FireFinder XLS system with an additional 24VDC power. Model PSX-1 2 is rated at 12 Amps. RPM - Remote Printer Module RPM Remote Printer Module The Remote Printer Module (Model RPM) provides a means of connecting the FireFinder XLS system to a printer, such as Model PAL-1, for creating a hard copy of system status and configuration reports. Concurrently, Model RPM provides an output port that can be configured to communicate with external systems. SIEMENS Industry, Inc. 6 Building Technologies Division - PTB • Power Termination Board PTB Power Termination Board Model PSC-12 comes packaged with a module called the Power Termination Board (Model PTB). Model PTB is required for operation with Model PSC-12. Model PTB filters the power from the incoming AC mains, and distributes it to the Model PSC-12 power supply and the optional Model PSX-12 power-supply extender. Model PTB has an optional connector that can be used during system installation, commissioning and service to provide the technician with a place to plug in their laptop PC, if required. Model AC-ADPT is an optional accessory cable that allows connection on one side to Model PTB, via a keyed connector and on the other end directly into to the laptop's transformer. Most laptop-computer external power transformers have removable AC power cords, which can be replaced by the optional Model AC-ADPT to temporarily provide an AC power source for laptop-PC usage during system installation, service and maintenance calls when needed. SNU-ASSY -* Single-Node Upload (SNU) Module SNU-ASSY Single-Node Upload (SNU) Module The Thermal Strip Printer (Model TSP-40A) is the Single- Node Upload (SNU) is an optional system module that provides a solution for uploading I downloading XLS I XLSV configuration data remotely. SNU can easily transmit data from a PC running the Zeus custom-configuration tool to a maximum 64 Person Machine Interfaces. Each SNU module has three (3) connections: Power, Ethernet and USB. The data transported ; between the Zeus tool and SNU is made through a direct 128-bit, Secure Sockets Layer (SSL) connection. FireFinder XLS Components —(cont.'d) RNI Remote Network Interface System-Status Display SSD-Series System-Status Display The System Status Display (SSD-series model displays) is a remote LED / LCD display that shows the local status of a FireFinder XLS system. An LED illuminates when Alarm, Supervisory, Trouble, and Security events occur on the system. A (4) four-line liquid-crystal display (LCD) will give details of the event in alphanumeric form. The display can be toggled to display additional events. Optional remote system control capabilities are available. Models SSD-C, SSD-C-INT, and Model SSD-C-REM have three (3) additional control buttons to acknowledge events, silence audible circuits, and reset the system. 'IC 4 *________ •! lic -> Interface Isolation Card IIC - Interface Isolation Card The Interface Isolation Card (Model TIC) is designed to isolate network signals when used with a Model NCC ring configuration, via Model NRC. Model TIC executes the aforementioned isolation by removing the backplane network signals from each Model CC-2 card cage. Model JIC also provides one (1) end of CAN termination on each side of Model CC-2. Models SSD-C and SSD-C-INT have an integral keyswitch that enables these control buttons to operate. Model SSD- C-REM is located within a locked cabinet. Therefore, no additional keyswitch is required for manual activation of the control buttons. XDACT-ASSY--* XDACT Assembly XDACT-ASSY XDACT Assembly The XDACT Assembly (Model XDACT-ASSY) is the blank plate used for holding the optional Digital Alarm Communication Transmitter (DACT), Model F2015-Ui on FireFinder XLS. Model XDACT-ASSY can be mounted on all CAB-series enclosures. Each assembly must be located in the Global Person Machine Interface cabinet for global configurations. Available communication protocols on a DACT module include: SIA DCS 8 I SIA DCS 20 I Ademco Contact ID. SIEMENS Industry, Inc. Building Technologies Division MDACT - Multi-Point Digital Alarm Communicator Transmitter MDACT - Multi-Point Digital Alarm Communicator Transmitter The Multi-Point Digital Alarm Communicator Transmitter (Model MDACT) is used in FireFinder XLS systems where point identification of Alarm, Supervisory, Security and Trouble events is required at Central or Remote Receiving Stations. An intelligent RS-485 communications protocol transmits all system information to Model MDACT. The installer selects the specific event or groups of events that are set to transmit from Model MDACT over phone lines to listed receiving station equipment. In turn, Model MDACT can transmit point information, via the Ademco Contact ID and the SIA protocol. A mounting plate (Model MOM2-XMP), MOM-2 card cage, and an XMl Interface Card are required for installation. CAB1 -4 Single Row Enclosure CAB1 Single Row Enclosure Model CAB 1, the smallest of the FireFinder XLS enclosures, can house a single Model CAB-MP cabinet mounting plate for mounting card cages, power supplies and bulk amplifiers. Model CAB1 also has four (4) mounting slots on the inner door for mounting The Person Machine Interface and Model ID-MP switch module brackets. Model CAB1 comes complete with a black back box; black inner and outer doors; a single lock and key set on the outer door; a single, installed cabinet mounting plate (Model CAB-MP), and a single, installed outer door lens plate (Model OD-LP). A red version (Model CAB1-R) is also available. Approximate size: 27" (68.6cm.) high, 26" (66cm.) wide, and 8" (20.3cm.) deep. FireFinder XLS Components —(ccnt.'d) ji CAB2 -* Two-Row Enclosure CAB2 Two-Row Enclosure The Two-Row Enclosure (Model CAB2) is the mid-sized FireFinder XLS enclosure capable of housing up to two (2) Model CAB-MP cabinet mounting plates. The inner door has two (2) rows of four (4) mounting slots. The outer door has space for mounting two (2) outer door plates (Models OD-LP, OD-BP or OD-GP), and can be configured to open from either side. Model CAB2 consists of the black Model CAB2-BB back box, the Model CAB2-BD black inner and outer door package, and one (1) Mocel OD- LP lens plate. The outer door has a single lock and key set installed. A red version (Model CAB2R) is also available, and a CAB2- RB back box is used with Model CAB2R. Approximate size is 45" (114.3cm.) high, 26" (66cm. wide, and 8" (20.3cm.) deep. CAB3 -+ Three-Row Enclosure CAB3 Three-Row Enclosure Model CAB3, the single largest FireFinder XLS enclosure available, can house a maximum three (3) Model CAB-MP cabinet mounting plates in the enclosure, and three (3) rows of inner-door mounting slots. The outer door can be configured to open from either side. Model CAB3 consists of the Model CAB3-3B back box, the Model CAB3-BD black inner and outer door package, and one (1) Model OD-LP lens plate. The outer door has two (2) locks and key sets installed. A red version (Model CAB3R) is also available. Approximate size is 63" (1 60cm.) high, 26" (66.4cm.) wide, and 8" (20.3cm.) deep. CAB-MP -* cabinet Mounting Plate SIEMENS Industry, Inc. —8— Building Technologies Division CAB-MP Cabinet Mounting Plate The Model CAB-MP cabinet mounting plate provides mounting for a single row of modules in a FireFinder XLS cabinet. Four (4) module spaces are available on Model CAB-MP, which is used to mount the Model CC-5 card cage; the Modell, CC-2 card cage; the Model PSC-12 power supply; the Model PSX-12 power-supply extender, and the Model ZAM-80 /180-zone amplifiers. Enclosure Trim Kits Trim kits are available for all system enclosures for semi- flush mounting applications. Model CAB1-IK (for black enclosures) and the Model CAB1 R-TK (for red enclosures) fit inside the Models CAB1 and CAB1-R enclosures. Similarly, Models CAB2-TK and CAB-2R-TK fit inside the Model CAB-2 enclosure, while Models CAB3-TK and CAB3R- 1K fit the Model CAB-3 enclosure. Remote Transponders The FireFinder XLS system can use remote transponders for mounting additional modules such as amplifiers without requiring a Person Machine Interface or any control switches. Special doors are available for systems using Model CAB-2 or Model CAB-3 remote transponders. These doors (Models CAB2-XBD and CAB3-XBD) omit the unused inner door, and come complete with ventilation louvers built into the door. Model CAB2-XBD fits into Model CAB2-BB, and Model CAB3- XBD fits into Model CAB3-BB. Model CAB2-XBD and CAB3- XBD are supplied in black. Red versions (Models CAB2-XRD and CAB3-XRD) are also available. Complete box and door kits are available, Models CAB2-X and CAB3-X. ID-MP -> Inner Door Mounting Plate ID-MP Inner Door Mounting Plate The inner door mounting plate (Model ID-MP) is mounted on the inner door of any given model CAB enclosure. Model ID-MP plates are used to mount switch-control modules (Model SCM-8); LED control modules (Model LCM-8), or fan-control modules (Model FCM-6). Four (4) mounting plates are included with each order of Model ID-MP. Each mounting plate has four (4) spaces for control modules, and can hold either four (4) Model SCM- 8 modules (one [1] control module space for each module); four (4) LCM-8 (one [1]control module space for each module), or two (2) Model FCM-6 modules (two [2] module spaces for each module). FireFinder XLS Components —(cont.'d) ID-MP Inner Door Mounting Plate Combinations are also allowed. Blank spaces in Model ID- MP can be covered using the blank-control-module plate (Model BCM). Up to four (4) Model ID-MP -modules can be mounted in a single row on the inner door. OD-BP -* Outer Door Blank Plate OD-BP Outer Door Blank Plate The Outer Door Blank Plate (Model OD-BP) entirely covers an unused row of a XLS system cabinet, and is mounted on the outer door. One (1) blank plate is included with each order of Model OD-BP. ID-SP -4 Inner Door Blank Single Plate ID-SP Inner Door, Blank Single Plate The inner door, blank single plate (Model ID-SP) is used to cover any single-module blank spaces within the inner door where no Person Machine Interface or Model ID-MP is being used. Up to four (4) Model ID-SP modules can be mounted in a single row on the inner door. Two (2) blank plates are included with each order of Model ID-SP. BCM -* Blank Control Module Plate BCM Blank Control-Module Plate Model BCM plates can be mounted on a single ID-MP. Four (4) blank module plates are included with each order of Model BCM. OD-LP -* Outer Door Lens Plate OD-LP Outer Door Lens Plate The Outer Door Lens Plate (Model OD-LP) is a clear plastic lens plate mounted on the outer door of a system cabinet. Model OD-LP is used to allow operators to see the system interface and controls mounted on the inner door, but restricts access to unauthorized users. The plate covers an entire row on the outer door. A single lens plate is included with each order of Model OD-LP. SIEMENS Industry, Inc. Building Technologies Division OD-GP --> Outer Door Grill Plate OD-GP Outer Door Grill Plate The Outer Door Grill Plate (Model OD-GP) also covers an entire row on the outer door of a system cabinet, but has four (4) rows of ventilation louvers on it. Model OD-GP is mounted in front of system bulk amplifiers, card amplifiers, or other modules that generate heat. Using Model OD-GP will permit airflow across these modules to aid in heat dissipation. One (1) grill plate is included with each order of Model OG-GP. Remote System Enclosures Models REMBOX2 and REMBOX4 are FireFinder XLS system enclosures that are used for remotely mounting inner-door modules, such as: Person Machine Interfaces; switch modules (Model SCM series); Live Voice Modules (Model LVM), and Firefighters' Master Telephone (Model FMT) modules. Models REMBOX2 and REMBOX4 are thinner than regular Model CAB-series of enclosures - just 5" (12.7cm.) deep overall, and are perfect for mounting in limited-space areas (e.g. - office-complex lobbies or behind a receptionist's desk). No card cages, power supplies or bulk amplifiers can be mounted in a given Model REMBOX-series enclosure due to their smaller depth. However, Person Machine Interfaces and some modules (e.g. - the remote network interface module [Model RN!]; the output control module [Model OCM-16], and the supervised input module [Model SIM-16]) can be mounted in a given Model REMBOX-series enclosure. Due to the depth of Models LVM and FMT, no Model 0CM- 16 or Model SIM-16 modules can be used simultaneously with Model LVM or Model FMT. Model REMBOX2 and Model REMBOX4 are designed for flush mounting with no trim kit required. Both enclosures also come with a clear lens plate on the cover. FireFinder XLS Components - (cont.'d) REMBOX2 - Two-Module Remote Enclosures REMBOX2 Two Module Remote Enclosures Model REMBOX2 has two (2) inner-door module spaces, and can hold a single Person Machine Interface, up to two (2) switch module brackets and one (1) Model LVM. Combinations are also allowed. Model REMBOX2 can also mount a single RNI remote network interface on a bracket included in the backbox. A bracket, known as Model REMBOX2-MP, can be used to mount up to four (4) Model OCM-16 output control modules or SIM-1 6 supervised input modules. Model REMBOX2-MP must be purchased separately. Approximate size of Model REMBOX2 is 14-1/2" (3 6.8cm.) wide, 181/2" (47cm.) high and 5" (12.7cm.) deep. REMBOX4 -> Four-Module Remote Enclosures REMBOX4 Four-Module Remote Enclosures Model REMBOX4 has space for mounting four (4) inner-door modules. Any combination of A Person Machine Interface (two-module spaces); switch module brackets; Model LVM, or Model FMT (one-module space each) can be used. Unused module spaces can be covered with Model ID-SP blank plates. Model REMBOX4 can also mount a single, remote network interface (Model RNI) on a bracket included in the backbox. A bracket known as Model REMBOX4-MP can be used to mount up to eight (8) output control modules (Model 0CM-1 6) or supervised input modules (SIM-1 6). Approximate size of Model REMBOX4 is 24" (61 cm.) wide, 18-112"(47cm.) high and 5" (12.7cm.) deep. Model REMBOX4-MP must be purchased separately. XLS-MSE2-ADPT —*Enclosure Adapter XLS-MSE2/R-ADPT - XLS MSE-2/11 Enclosure Adapter Model XLS-MSE2-ADPT, which must be used in conjunction with Model CAB-MP, is an adapter that allows FireFinder XLS cards to be mounted in older-generation MXL Model MSE-2 small black enclosures. Model XLS-MSE2R-ADPT, which must be used in conjunction with Model CAB-MP, is an adapter that allows FireFinder XLS cards to be mounted in older-generation MXL Model MSE-211 small red enclosures. XLS-MME3-ADPT —*Enclosure Adapters XLS-MME3/R-ADPT - XLS MME-3/11 or MBR-2 Enclosure Adapters Model XLS-MME3-ADPT, which must be used in conjunction with Model CAB-MP, is an adapter that allows FireFinder XLS cards to be mounted in older- generation MXL Model MME-3 or Model MBR-2 medium black enclosures. Model XLSMME3R-ADPT, which must be used in conjunction with Model CAB-MP, is an adapter that allows FireFinder, XLS cards to be mounted in older-generation MXL Model MME-311 medium red enclosures. XLS-MLE6-ADPT —'Enclosure Adapter XLS-MLE6/R-ADPT - XLS MLE-6/11 Enclosure Adapter Model XLS-MLE6-ADPT, which must be used in conjunction with Model CAB-MP, is an adapter that allows FireFinder XLS cards to be mounted in older- generation MXL Model MLE-6 large black enclosures. Model XLS-MLE6R-ADPT, which must be used in conjunction with Model CAB-MP, is an adapter that allows FireFinder XLS cards to be mounted in older- generation MXL MLE-6R large red enclosures. SIEMENS Ind ustry,.Inc. _10— Building Technologies Division FireFinder XLS Components —(cont.'d) XLS-MSE3-ADPT 'Enclosure Adapters XLS-MSE3IR-ADPT - XLS MSE-3LIR or MSE-3MIR Enclosure Adapters Model XLS-MSE3-ADPT is an adapter that allows FireFinder XLS cards to be mounted in older- generation MXL-IQ Model MSE-3L or Model MSE-3M black enclosure. Model XLS-MSE3R-ADPT is an adapter that allows FireFinder XLS cards to be mounted in older- generation MXL-IQ Model MSE-3LR or Model MSE- 3MR red enclosure. EL.i XLS-Rcc,-ADPT --'Enclosure Adapter XLS-RCC-1-ADPT - XLS RCC-1 Enclosure Adapter Model XLS-RCC1 -ADPT is an adapter that allows the FireFinder XLS Model SSDI-C series remote annunciator to be mounted in older-generation Model RCC-1 surface- mount enclosure. XLS-Rcc13F4ADPT -*Enclosure Adapters XLS-RCC1 3F/R-ADPT - XLS RCC-1 F/R or RCC-3 FIR Enclosure Adapters Model XLS-RCC1 3F-ADPT is an adapter that allows the FireFinder XLS Model SSDI-C series remote annunciator to be mounted in older-generation Model RCC-1 F or Model RCC-3F black, flush-mount enclosure. Model XLS-RCC1 3FR-ADPT is an adapter that allows the Model SSD/-C series to be mounted in older-generation RCC-1 FR and RCC-3FR, red flush-mount enclosure. Ii VPM -* VESDA VESDA-HLI-KIT -* VESDA High- Interface Equipment Level Interface Kit SIEMENS Industry, Inc. Building Technologies Division F--i VPM-MP -* VESDA Mounting Plate VPM, VESDA-HLI-KIT and VMP-MP - VESDA Interface Equipment The Very Early Smoke Detection Aspiration (VESDA) Peripheral Module (Model VPM) and the VESDA High- Level Interface Kit (Model VESDAHLI-KIT) are optional FireFinder XLS modules that work in conjunction to provide bi-directional communication between the FireFinder XLS FACP and multiple VESDA detection networks for the following types of VESDA detectors: LaserCOMPACT LaserFOCUS LaserPLUS LaserSCANNER Model VPM allows each FireFinder XLS FACP to annunciate 'Alert,' 'Action,' 'Fire 1,' and 'Fire 2' levels, as well as provide 'faults' from any zone on a connected VESDA network. The VPM Mounting plate (Model VPM-MP) allows mounting one (1) Model VPM and two (2) of Model VESDAHU-KIT inside a standard FireFinder XLS Model CA131, Model CA132 or Model CAB3 enclosure. Model VPM-MP utilizes two (2) module spaces on a single row of each enclosure. C900V2 -*Dialer-Capture Ethernet Module C900V2 - Dialer-Capture Ethernet Module The Dialer-Capture Ethernet Module (Model C900V2) links the data output of Model MDACT from the FireFinder XLS FACP to an Ethernet connection - on a local-area network (LAN) or wide-area network (WAN) - for communication to a central station over the Internet. Model C900V2 also allows Model MDACT to be optionally linked to the public switched telephone network (PSTN) for communication to a central station over telephone lines. Temperature and Humidity Range FireFinder XLS components are ®UL 864 91h Edition Listed for indoor dry locations within a temperature range of 1 20+/-3'F (49+1-2°C) to 32+/-3°F (0+/-2°C) and a relative-humidity range of 93+/-2% at a temperature of 90+/-3°F (32+/-2'C). Details for Ordering Details for Ordering - (continued) Model Part Number Description AC-ADPT 500-633992 Technician Laptop-Power connector BCM 500-033320 Blank control module plate, four (4) per package] C900V2 S54430-Cl 3-A2 Dialer-Capture Ethernet Module CAB-1 500-633007 Complete Single-Row Cabinet, black CAB-1 R 500-633728 Complete Single-Row Cabinet, red CABi -TK 500-633013 Single-Row Trim-kit Cabinet, black CAB R-TK 500-633729 Single-Row Trim-kit Cabinet, red CAB2-BB 500-633009 (2) Two-Row Back Box, black CAB2-RB 500-634941 (2) Two-Row Back Box, red CAB2-BD 500-633008 (2) Two-Row Inner & Outer Door set, black CAB2-RD 500-633755 (2) Two-Row Inner & Outer Door set, red CAB2-TK 500-633014 (2)Two-Row Trim-kit Cabinet, black CAB2R-TK 500-633753 (2) Two-Row Trim-kit Cabinet, red CAB2-XBD 500-633768 CAB2 Transponder Door CAB2-X 599-034252 Complete CAB2 wl Transponder Door no inner door] CAB2-XRD 500-633792 Medium-Enclosure Transponder Door, red mounts to Model CAB2-RB1 CAB3-BB 500-633011 (3) Three-Row Back Box, black CAB3-RB 500-634942 (3) Three-Row Back Box, red CAB3-BD 500-633010 3) Three-Row Inner & Outer Door Set, black CAB3-RD 500-633757 (3) Three-row Inner & Outer Door set, red CAB3-TK 500-633015 (3) Three-Row Trim-kit Cabinet, black CAB3R-TK 500-633754 (3) Three-Row Trim-kit Cabinet, red CAB3-XBD 500-633769 CAB3 Transponder Door CAB3-X 599-034253 Complete CAB3 wl Transponder Door no inner door] CAB3-XRD 500-633793 Large-Enclosure Transponder Door, red mounts to Model CAB3-RBI CAB-MP 500-633012 Back Box Module Mounting Plate CCL 599-634214 CAN Cable 3ft. (91.4 cm.) Length required for: SCM I LCM I FCM modules from Models CC-5 I CC-2 Inner Doors and from Row-to-Row on Model CAR-series Inner Doors CC-2 500-633440 Two (2) Slot Card Cage CC-5 500-633037 Five (5) slot Card Cage CDC-4 500-034200 Conventional Detector Card COM-BRK S54430-B7-Ai Communications Bracket CRC-6 500-033250 Controllable Relay Card CSB 500-033130 CAN Sounder Board DCT-P 500-699291 MDACT Programmer DLC 500-033090 Device Loop Card FCM-6 500-033140 Fan-Control-Module Switches (ON OFF, AUTO] GPMI-UK 500-650066 Software-Upgrade Kit for PMI (vers. 1) [to allow global functionalityl GPMI-2 554430-C3-Ai Model PMI -2 [with GPMt-HW-KEY] HCP 500-034860 Intelligent Control Point Module HUM 500-033170 Line-Isolator Module ID-MP 500-633027 Inner-Door Enclosure Mounting Plate, [four (4) per package] ID-SP 500-633028 Single-Module Inner-Door Enclosure Mounting Plate, [two (2) per package] TIC 500-850328 Interface Isolation Card LCM-8 500-033100 LED Annunciator Module [eight (8) LED sets] MDACT 500-699254 Multi-Point Digital-Alarm Communication Transmitter MLC S54431 -B4-A1 MXL Addressable-Device Line Card MOM2-XMP 500-634822 Mounting Plate for Model MOM-2 MOM-2 500-892766 MXL Module Card Cage lone (1) full slot] Model Part Number Description NIC-C 500-033240 Network Interface Card NRC S54430-A2-Ai Network Ring Card: 2nd Generation OD-BP 500-633017 Outer Door Blank Plate OD-BP-R 500-634919 Outer Door Blank Plate, red OD-GP-R 500-634920 Outer Door Grill Plate, red OD-GP 500-633018 Outer Door Grill Plate OD-LP 500-633016 Outer Door Lens Plate PAL-1 500-692407 &UL Listed Parallel Printer PMI-3 S54430-C1 5-Al Person Machine Interface 3 PMIT-3 (Overlays) S54430-C16-A1 Alternate-language Overlays for navigation on a FireFinder XLS operation interface PSC-1 2 500-033340 Power supply with battery charger PSX- 12 500-034120 Power supply extender [12A@24VDC] PTB 500-033390 Power termination board REMBOX2 500-633772 (2) Two-module remote lobby enclosure, black REMBOX2R 500-650612 (2) Two-module remote lobby enclosure, red REMBOX2-MP 500-634211 Mounting plate for Models 0CM-1 6/ SIM-i 6 in Model REMBOX2 REMBOX4 500-633914 (4) Four-module remote lobby enclosure, black REMBOX4-MP 500-634212 Mounting plate for Models 0CM-1 6/ SIM-16 in Model REMBOX4 REMBOX411 500-650613 (4) Four-module remote lobby enclosure, red RNI 500-033420 Remote network interface module RPM 500-033270 Remote printer module SCM-8 500-033040 Switch module, eight (8) switches SIM-16 500-034060 Supervised input module SNU-ASSY S54430-A3-A1 SNU Processor and USB cables (wl SNUIOM) SSD 500-034740 ystem-status display SSD-C 500-648733 System-status display with control SSD-INT 500-034740 System-status display with multi-lingual overlays SSD-C-INT 500-034750 System-status display with control and multi-lingual overlays SSD-C-REM 500-634773 System-status display with control for 'emote lobby enclosure TSP-XB 500-849949 Brackets for thermal-strip printer TSP-XC 500-849950 Cables for thermal-strip printer VNTPC 500-650490 Virtual Network Tunnel VPM S54430-F93-A2 VESDA Peripheral Module VPM-MP S54430-F95-A2 Mounting Plate for VESDA Peripheral Module VESDA-HU-KIT S54430-F99-A2 VESDA High-Level Interface Kit XDACT-ASSY S54430-A5-Ai XDACT mounting plate (wl cable) XLS-MLE6-ADPT S54430-C9-A1 MLE-6 enclosure adapter for XLS, black XLS-MLE6R-ADPT S54430-C9-A2 MLE-611 enclosure adapter for XLS, red XLS-MME3-ADPT S54430-C8-Ai MME-3 and MBR-2 enclosure adapters for FireFinder XLS, black XLS-MME3R-ADPT S54430-C8-A2 MME-311 enclosure adapter for XLS, red XLS-MSE2-ADPT S54430-C7-Ai MSE-2 enclosure adapter for XLS, black XLS-MsE2R-AoPT S54430-C7-A2 MSE-211 enclosure adapter for XLS, red XLS-MsE3-ADPT S54430-C14-A1 MXL-IQ MSE-3L and MSE-3M enclosure adapters for FireFinder XLS, black XLS-MSE3R-ADPT S54430C14A2 MXL-IQ MSE-3LR & MSE-3MR enclosure adapters for XLS, red XLS-RCC1 -ADPT S54430-Z14-A1 RCC-i enclosure adapter for XLS-SSD, black XLS-RCC1 3F-AOPT S54430-Z1 3-Ai RCC-i F & RCC-3F enclosure adapters, black XLS-Rcc13FR-ADP S54430-Zi 3-A2 RCC-i FR & RCC-3FR enclosure adapters, red ZIC-2C 500-648671 (2) Two-channel adapter card, via (Model ZIC-8B) ZIC-4A 500-033050 (4) Four-circuit zone indicating card ZIC-8B 500-648670 (8) Eight-circuit zone indicating card Notice: This marketing data sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product's installation instructions. Fire Safety Fire Safety 8 Fernwood Road 1577 North Service Road SIEMENS Industry, Inc. Florham Park, NJ 07932 East Oakville, Ontario April 2017 Building Technologies Division Tel: (973) 593-2600 (sn-FS) L6H 0H6 / Canada supersedes sheet dated 4/2015 FAX: (908) 547-6877 Printed in U.S.A. Tel: [9051465-8000 (Rev. 161 URL: www.usa.Sjemens.com/Fjre URL: www.Siemens.CA Watertight housing (Model FDBZ-WT) SIEMENS Data Sheet Fire Safety Products Specialized Devices Air-Duct Housings —> FDBZ Series Models FDBZ492, FDBZ492-HR, FDBZ492-R and FDBZ492-RP (with FDBZ-WT and FDBZ492-RTL) ARCHITECT AND ENGINEER SP ECIFICATIONS Four (4) models available - Addressable and conventional (with and without relays) r Compatible with Siemens - Fire Safety conventional and addressable fire-alarm control panels (FACPs) tmim L FDBZ-series of air-duct housings Magnet test feature with the Model 0P121 (FDBZ492, FDBZ492-HR, FDBZ492-R and FDBZ492-RP) conventional detector Remote alarm Design for air-velocity range of 100 to 4,000 indicator feet-per-minute (fpm) (Model FDBZ492-RTL) Robust, compatible conventional remote indicator test switch that incorporates tn-color light-emitting diode (LED) Clear housing cover with smoke test port on cover for quick identification of detector type Removable with four (4) captive-thumb screws (no tools required) Includes a smoke/ aerosol detector test port Optional NEMA4X-reinforced, stainless-steel and watertight enclosure available, Model FDBZ-WT No tools required for cover removal, sampling and exhaust-tube installations Trouble-event activation upon front-cover removal Alarm LED visible from front Product Overview The Siemens - Fire Safety Model 'FDBZ'-series of air- duct-detector housings are designed to be used with the Siemens Model 'H'-series, 'FD'-series and the Model OP1 21 detectors. Designed for installation directly to heating, ventilating and air-conditioning (HVAC) duct systems, the Model 'FDBZ-series complies with National Fire Protection Association Standard (NFPA) No.'s 72 and 90A, and is Underwriters' Laboratories Listed. When equipped, the air-duct detector housing will signal the presence of smoke being carried through the duct system. Air-duct detectors are not intended to be substituted for open-area detection. Notes: Most conventional time-control equipment guarantee only one (1) detector per zone when the detector's operated relay function is critical. The connection of a remote lamp and a remote relay —per detector— is allowed. Refer to the installation manual for the respective conventional fire system. Self-contained model available with 'on-board' power supply for conventional detectors Expanded temperature range Relay models available ®UL268A Listed, ULC-S529 Listed; FM C3010), CSFM (#3240-0067:0265) Approved Notes - (cont.'d): With either the Desigo® series or FireFinder® XLS series of FACP5, up to 252-addressable detectors with relays per circuit may be used. The connection of an intelligent remote lamp (ILED) and a remote relay is allowed for each detector simultaneously. Specifications The Model 'FDBZ-series of air-duct housings are uniquely designed to use with the photoelectric detector. Sensitivity of Models PE-1 1, PE-1 1 C and 0P121 detectors can be verified for calibration via LED visual status or a Model RSAW-1 1, Model RSAC-1 1 or Model FDBZ492-RTL multi- color remote lamp. A green flash indicates the detector has passed its self test. Amber indicates a Trouble condition, and red indicates an Alarm event. Sensitivity range for Models HFP-1 1, FP-1 1, SFP-1 1, HFPO- 11, SFP0-11, FD0421, FDOOT441 and FDOOTC441is verified from the multi-color LED of the respective detector, or its sensitivity reading may be printed by command from the corresponding FACP to an optional printer. Model 'FDBZ'—Series of Air-Duct Housings and Detectors 6156 SIEMENS Industry, Inc. Building Technologies Division Specifications - (continued) The remote alarm indicator (Model FDBZ492-RTL) allows for manual testing via a key-switch for conventional anc addressable detectors, as well as the conventional and addressable air-duct housing with relay. Model FDBZ492-RTL, which mounts remotely from the conventional and addressable air-duct housing, allows for manual relay-output control. The duct-detector remote indicator key-switch also indicates the current state of the detector. The watertight housing (Model FDBZ-WT), which allows the air-duct detector housing to be installed inside the separate NEMA 4X enclosure, is for installations for either an outdoor area or in environments where excessive moisture is prevalent. Each detector unit employs a cross-sectional sampling principle of operation. Inlet sampling tubes are available in four (4) lengths (see: Sampling Tube Selection Table). Outlet sampling tubes are one (1) common length and draw. A continuous, cross- sectional sample of air moves through the duct. Stratification or skin affect phenomenon that occurs in the duct can prevent smoke (especially in large ducts) from reaching a spot-type detector. In addition, the unique design of the sampling chamber insures uniform sensitivity in air velocities, ranging from a low of 100 fpm to as high as 4,000 fpm. Each housing comes with three (3) wiring entry ports: Two (2) 3/4" conduit knockouts One (1) 1/2" conduit opening The inlet sampling tube length is determined by the width of the air duct being protected. The inlet tube - greater than and nearest to the duct width - should be used (see: Sampling Tube Selection Table). The inlet tube can then be trimmed at the job site to theexact width of the duct. The outlet sampling tube for all ducts - irrespective of width - has a fixed length of approximately 5.5 inches (14cm.), and is supplied with the air-duct housing. Note: When the use of a remote relay is required, order Model FDBZ492-R for conventional systems; Model FDBZ492-HR for addressable systems. When required, a separate watertight enclosure (Model FDBZ-WT), which is designed to contain the air-duct housings is available. (For full details, refer to installation instructions for the respective air-duct housing.) Note: When a self-contained duct detector with power supply is required, order Model FDBZ492-RP. (For full details, refer to installation instructions part number A6V1 0330327.) SIEMENS Industry, Inc. Building Technologies Division Sampling Tube Selection Table Sampling Tube Duct Width (Model No.) For duct widths 6"to1' ST-1 For duct widths 1'to 3' ST-25 For duct widths 3' to 5' (requires support) ST-50 For duct widths 5'to 10' (requires support) ST-i 00 Maintenance of the detector is easily accomplished via the removal of the duct-housing sampling chamber cover. The detector, which plugs into the housing, is easily removed for cleaning or replacing by a trained technician. All that is necessary for installation of the air-duct detector is the cutting of three (3) small holes for the Sampling Tube installation (template included), and the drilling of two (2) holes for mounting the air-duct housing. The unit is then easily mounted in place, and connection made to the existing wires or terminals - if optional accessories are utilized. No mechanical tools are required for removing the cover or connecting the sampling and exhaust tubes to an air- duct housing. Models ST-SO and ST-1 00 require support. However, Model ST-100 is shipped in two (2) 5-ft. (152 cm.) pieces with a coupling for field assembly. Technical Data Operating Temperature +32°F (0°C) to 120°F (49°C) Ranges: Sampling Tube Pressure >0.01 inches; Range of Differences: < 1.2 inches of water column Relative Humidity: 0-95%; non-condensing Air Pressure I No effect / Altitude Range: No limitations Air-Duct Velocity: 100— 4,000 ft. / mm (0.51— 20m / sec) Dimensions: { H -x- W -x- D } Rectangular: 14.38"-x-5"-x-2.5" (37 cm. -x- 12.7 cm. -x- 6.36 cm.) Square: 7.75"-x-9"-x-2.5" (119.7 cm. -x- 22.9 cm. -x- 6.36 cm.) Detector Weight: 1.8 Lbs. (0.82 Kg.) Notes to Architect: When building codes regulate he location of detectors within ventilating systems, make sure the number and locations of detectors are in accordance with the code regulations. For additional electrical specifications, please see the installation instructions of the corresponding air-duct housing. Operation Based on the monitoring results, the LED indicator flashes the following colors based on the following conditions: lash Flash Color Condition Interval (in seconds) Normal supervisory operation. Green*: Smoke sensitivity is within 10 rated limits. Detector is in Trouble Yellow: condition, and needs either 4 repair or replacement. Red: Alarm condition. 1 No Flash: Detector is not powered. -- * LED can be turned OFF. Please follow the corresponding description of the panel used. Products included with the air-duct housing: short-return (outlet) tube - (I) stopper #12 + 314" sheet-metal screws - (1) mounting template Note: Detector and sampling tube to be purchased separately. Minimum hardware required is: one (1) air-duct housing assembly; one (1) sampling tube and one (1) detector. Details for Ordering Model Part Number Description A two-wire addressable or conventional duct detector (without relays) designed for direct use on heating, ventilating and air- conditioning (HVAC) air-duct systems. When equipped, the air-duct detector S54319-housing will signal the presence of smoke FDBZ492 being carried through the duct system. B22-A1 For use with the following Models: - HFP-11 - FD0421 - 0P121 - SFP-1 1 - FDOOT441 - PE-1 1 - HFP0-11 - FDOOTC441 PE-11C - SFP0-1 1 - FP-1 1 A two-wire addressable duct detector (with relays) designed for direct use to HVAC air- duct systems and works with the Remote FDBZ492- Test Switch (FDBZ492-RTL). This part has a HR programmable relay base, and when S54319- equipped, the addressable air-duct detector B23-A1 housing will signal the presence of smoke being carried through the duct system. For use with the following Models: - F00421 - FP-1 1 - sFP-1 1 F000T441 - HFP-li - SF P0-1 - FDOOTC441 SIEMENS Industry, Inc. Building Technologies Division Details for Ordering - (continued) Model Part Description Number A two-wire conventional duct detector with relays designed for direct use on HVAC air- duct systems. This detector has a relay FDBZ492 base, and when equipped with conventional R S54319- air-duct housing, will signal the presence of B24-Al smoke being carried through the duct system. For use with the following Models: - OPi2i - RE-li -ps-nc A four-wire conventional duct detector with relays and a built-in power supply. Housing is designed for direct use to HVAC air-duct FDBZ492- systems. It has a relay base with a built-in RP CAD1 i :2 power source. When equipped with conventional air-duct housing, this duct B25-Al detector will signal the presence of smoke being carried through the duct system. For use with the following Models: - 0P121 - RE-li - PE-11C Device is used for manual testing via a key- switch for duct-housing Models FDBZ492- R, FDBZ492-RP and FDBZ492-HR. Device FDBZ492- mounts remotely from the conventional RTL ' and addressable air-duct housing, allowing for manual relay-output control. The duct- S27-Al detector remote key-switch also indicates the current state of the detector. For use with the following Models: - FDBZ492-R - FDBZ492-RP - FDBZ492-HR An optional, separate watertight NEMA 4X enclosure (Model FDBZ-WT) that provides added watertight protection for any of the Model FDBZ492-series duct housings. The duct housing fits into the separate 4X enclosure. This part allows the air-duct FDBZ-WT S54319- detector housing to be installed in the B26-A1 separate enclosure, and can be used in either an outdoor area or in environments where excessive moisture is prevalent. For use with the following Models: - FDBZ492 - FDBZ492-R - FDBZ492-HR - FDBZ492-RP ST- i 0 500-649710 Sampling tube for Ducts 6" to 1' ST-25 500-649711 Sampling tube for Ducts over 1' to 3' ST-50 500-649712 Sampling tube for Ducts 3" to 5' ST-100 500-649713 Sampling tube for Ducts 5'to 10' Notice: This marketing data sheet is nc:t intended to be used fo- system design or installaton purposes. For the most up-to-date informEtion, refer to each product's installation instructions. Fire Safety Fire Safety 8 Fernwood Road 1577 North Service Road SIEMENS Industry, Inc. Florham Park, NJ [7932 East Oakville, Ortario September 2014 Building Technologies Division Tel: (973) 593-2600 (311-FS) L6H 3H6 /Canada Supersedes sheet dated 8/13 FAX: (908) 547-E77 Printed .n USA. Tel: 19051465-8000 (Rev. 4) URL: www.usa .S eiens.conlFi-e URL: www.Siemans.cA O Compatible with Siemens Model The Photoelectric Smoke Detector (Model FD0421) uses state-of-the-art H'-series devices on the same loop microcontroller circuitry and surface-mount technology for maximum reliability. (with Desigo Fire Safety Modular I Model FD0421 incorporates an optical sensor using a light-scattering detection FireFinder XLSIV I FCIFV20-series principle. The device utilizes advanced software algorithms to analyze the signals, fire-alarm control panels and provides highly stable and accurate smoke detection. O Compatible with Model DPU Model FD0421 also uses state-of-the-art microprocessor circuitry with error check; (device programmer/ loop tester) detector self-diagnostics, and supervision programs. O Each detector is self-testing: - self-monitored for sensitivity Field-Device Programmer! Test Unit with UL Listed limits Model FD0421 is compatible with the Siemens field-device programmer I test - complete diagnostics performed every 10 seconds unit (Model DPU), which is a compact, portable and menu-driven accessory for electronically programming and testing these addressable detectors promptly and O Polarity insensitive via reliably. For instance, the field technician selects the accessory's program mode, Sure Wire"' technology and enters the desired address. Functions with Model DB- Model DPU eliminates the need for cumbersome, unreliable mechanical 11-series mounting bases programming methods (e.g. - dials and rotary switches), and reduces installation 0 Tr-color detector-status light-emitting and service costs by electronically programming and testing the detector prior to diode (LED) with 360'view installation. When set in 'test' mode, Model DPU will perform a series of O Field-selectable application- diagnostic tests without altering the address or other stored data, allowing sensitivity profiles technicians to determine if the detector is operating properly. Remote sensitivity- measurement capability Utilizes advanced, microprocessor-based signal processing Extended temperature-and- humidity operating range Automatic environment compensation Superior electromagnetic interference (EM!) and radio-frequency interference (RFI) immunity Restriction of Hazardous Substances (RoHS compliant) UL 268A Listed [for direct air-duct use], ULC Listed; FM (#3230, #3210), CSFM (#7272-0067:0258) Approved @@<~>X Siemens Building Technologies Division Each field-device programmer I test unit operates on AC power or rechargeable 'batteries, providing flexibility and convenience in the programming I testing of fire-safety equipment from practically any location. Additionally, with the use of a Model DPU unit, there is no longer a cause for concern with any vibration, corrosion and other deteriorating conditions that can accompany the vitality of a mechanical- addressing mechanism. Photoelectric Smoke Detector Data Sheet 6152 usa.siemens.comldesigo-fire-safety Labyrinth Optical transmitter Optical receiver I ti11hWEJ) Each detector fits into one (1) wall-or-ceiling footprint, and only occupies one (1) address on the signal-line circuit (SLC). Model FD0421 is a plug-in, two-wire and addressable photoelectric smoke detector. Model FD0421 is Underwriters' Laboratories Listed [UL268A Listed for direct in-air duct usage]. Each detector consists of a dust-resistant photoelectric chamber and microprocessor-based electronics with a low-profile plastic housing. Every Model FD0421 fire detector is shipped with a protective dust cover: Model FD0421 is a wide-spectrum, photoelectric smoke detector that incorporates an infrared light-emitting diode (IRLED), as well as a light- sensing photodiode. Under normal conditions, light transmitted by the LED is directed away from the photodiode and scattered through the smoke chamber in a controlled pattern. The smoke chamber is designed to manage light dissipation and extraneous reflections from dust particles or other non-smoke, airborne contaminants in such a way as to maintain stable, consistent detector operation. When smoke enters the detector chamber, light emitted from the IRLED is scattered by the smoke particles, and is received by the photodiode (see: the computer-graphic images at the top of this page). Dust cover Photoelectric smoke detector Application Parameter Sets Model FD0421 provides four (4) pre-programmed sensitivity parameter sets that can be selected by the Siemens fire-alarm control panel in order to match the expected application or environmental conditions: Sensitive Standard Robust Air-duct Sensitive: This application parameter set is practically suitable for areas where few misleading sources of false alarm are present, and is appropriate where priority is given to detecting open fires as soon as possible (e.g. —typically a clean application with controlled environmental conditions). Standard: This application parameter set, which is ideal for normal office I hotel-lobby-type applications, is the default setting. Robust: This application parameter set offers improved resistance to false alarms in areas where misleading sources, such as cigarette smoke or exhaust fumes, may cause a nuisance alarm. Air-Duct: This application parameter set is used when the detector is used a UL268A (DI) compliant, direct in-air duct application without a duct housing. Model FD0421 does not require a field sensitivity test. Model FD0421 is UL Listed as a self-testing device and complies with NEPA 72 as a self-monitoring detector and control-panel arrangement. This parameter set is also used when Model FD0421 is used in air-duct housings (Models FDBZ492 and FDBZ492-HR). Siemens Building Technologies Division —2— usa.siemens.com/desigo-fire-safety Application Parameter Sets - (continued) Air-Duct: A quick visual inspection is sufficient to indicate the condition of Model FD0421 at any time. If more detailed information is required, a printed report can be provided from the compatible FACP, indicating the status and settings assigned to each individual detector. When Model FD0421 moves to Alarm'imode, the detector will flash RED and continue flashing until the system is reset at the FACP. At that same time, any user-defined, system-alarm functions programmed into the system are activated. Model FD0421 contains a tn-color LED indicator, capable of flashing any one (1) of three (3) distinct colors: GREEN I YELLOW I RED. During each flash interval, the microprocessor-based detector monitors the following scenarios: Smoke sensitivity is within the range indicated on-the nameplate label Smoke in its sensing chamber Internal sensors and electronics are functional Based on the results of the monitoring, the LED indicator flashes the following: FLASH COLOR CONDITION FLASH INTERVAL [in seconds] GREEN*. Normal supervisory operation. Smoke sensitivity is within rated limits. 10 YELLOW: Detector is in trouble and needs replacement. 4 'Alarm' condition 1 NO FLASH: Detector is not powered. - * denotes LED can be turned OFF Please follow the corresponding description of the panel used. A quick visual inspection is sufficient to indicate the condition of the detector at any time. If more detailed information is required, a printed report can be provided from the respective Fire Safety Modular FireFinder XLS/V I FC/FV20—series FACP that indicates the status and settings assigned to each individual detector. All Model FD0421 intelligent, addressable detectors use a surface-mounting base (Model D13-1 1 or D13-1 1 E), which mounts on a 4-inch (10.2 cm.) octagonal, square or single-gang electrical back box. The base utilizes screw-clamp contacts for electrical connections and self-wiping contacts for increased reliability. The Model DB-1 1 detector base can be used with the optional Siemens Model LK-1 1 detector locking kit, which contains 50 detector locks and an installation tool to prevent unauthorized removal of the detector head. Model DB-1 1 has aesthetically conducive plugs to cover the outer mounting-screw holes. Model FD0421 may be installed on the same initiating circuit with the Siemens Model 'H'-series detectors [when used with Desigo Fire Safety Modular I FireFinder XLS/V I FC/FV20—series FACP5] - HFP-11, HFPT-11 Model 'XTRI'-series interfaces Model 'HTRI'-series interfaces Model 'HMS'-series manual stations Model HCP output-control detection devices Model 'HZM'-series of addressable, conventional zone modules Each detector, which is shipped with a protective dust cover, consists of the following: Dust-resistant photoelectric chamber Solid-state, non-mechanical thermal sensor Microprocessor-based electronics with a low-profile plastic housing All Model FD0421 intelligent, addressable detectors are approved for operation with the Underwriters' Laboratories-specified temperature range of 32° to 120° (0° to 49°C). (See: installation manual P/N—A6V10323928 for further details) Siemens Building Technologies Division -3- usa.siemens.com/desigo-fire-safety Installation of Model FD0421 smoke detectors requires a two-wire circuit. In many retrofit cases, existing wiring may be used. 'T-tapping' is permitted only for Style 4 (Class B) wiring. Model FD0421 is polarity insensitive, which can greatly reduce installation and debugging times. Model FD0421 detectors can be applied within the maximum 30-feet center spacing (900 sq. ft. areas,) as referenced in NFPA 72. This application guideline is based on ideal conditions - specifically, smooth ceiling surfaces; minimal air movement, and no physical obstructions between potential fire sources and the actual detector. Do not mount detectors in close proximity to ventilation or heating and air conditioning outlets. Exposed joists or beamed ceilings may also affect safe spacing limitations for detectors. Should questions arise regarding detector placement, observe NFPA 72 guidelines. Good fire-protection-system engineering and common sense dictate how and when fire detectors are installed and used. Contact your local Siemens - Fire Safety distributor or sales office whenever you need assistance applying Model FD0421 in unusual applications. Be sure to follow NFPA guidelines and UL Listed I ULC Listed installation instructions - included with every Siemens - Fire Safety detector - and local codes as for all fire protection equipment. L -• ________ OPERATING '32'-'120'F TEMPERATURE: (0' - M9°C) RELATIVE 0- 95% HUMIDITY: (non-condensing) AIR PRESSURE: No effect AIR ',ELOCITY. 0 -4,000 feet-per-minute (fpm) (0-20 meters-per-second) INPUT VOLTAGE 16VDC - 30VDC RANGE: 'ALARM' CURRENT, MAX.: 280pA ~F 'STANDBY' CURRENT, MAX.: 2801JA, max. (average) MAXIMUM 30-ft. centers (900 sq. ft.), SPACING: per NFPA 72 DETECTOR 0.317 Lbs. (0.144 kg.) MECHANICAL P PROTECTION UL and ULC Listed (with STI Guard Model STI-9604) GUARD: ji1ft1 11 MODEL) DATA PANEL OR TYPE )SHEET XLS 6300 FireFinder® (fire) XLSV 6340 FireFinder (fire WI voice) DESIGO 7300 MODULAR Desigo Modular (overview) FC2005 6813 Desigo Fire Safety - 50-point addressable FC2025 Desigo Fire Safety 252-pt. 6815 addressable (fire) FC2050 Desigo Fire Safety 504-pt. - addressable (fire) Desigo Fire Safety FV2025 252-point addressable (fire W/ Intelligent Voice 6821 Communication [IVC]) __ 504 -pt. addressable :FV:2050] (fire w/ Intelligent Voice Communication [IVC]) MODEL II PART II PRODUCT ORTYPE ft NUMBER ft FD0421 S54320-F4-A1 F Photoelectric I Smoke Detector Compatible Devices: MODEL PART OR TYPE ft NUMBER PRODUCT DB-1 1 500-0941 51 Detector Mounting Base DB-1 1 E j 500-094151 E Detector Base, small Detector Mounting DB2-HR ] S54370-Fl 2-Al Base with Relay Remote Alarm RL-HC 500-033230 Indicator: 4" (10.2 cm) octagon- box mount, red Remote Alarm RL-HW 500-033310 Indicator: single- gang box mount, red FDBZ492 S54319-B22-A1 Addressable Air-Duct Housing Addressable Air- FDBZ492.HR S54319-B23-A1 Duct Detector with Relay LK-1 1 500-695350 Base Locking Kit See: www.STI-USA.com for further details on ordering Model 511-9604 In Canada order: MODEL II PART ORTYPE ft NUMBER PRODUCT Detector DB-1 1 C 500-095687 Mounting Base, ULC Listed - The information contained in this data-sheet document is intended only as a summary, and is subject to change without notice. The product(s) described here has/have a specific instruction sheet(s) that cover various technical, limitation and liability information. Copies of install-type, instruction sheets -as well as the General Product Warning and Limitations document, which also contains important data, are provided with the product, and are available from the Manufacturer. Data contained in the aforesaid type of documentation should be consulted with a fire-safety professional before specifying or using the product. Any further questions or assistance concerning particular problems that might arise, relative to the proper functioning of the equipment, please contact the Manufacturer. SIEMENS SIEMENS Data Sheet Fire Safety Products Intelligent Detection Devices Thermal (Heat) Detector Model FDT421 ARCHITECT AND ENGINEER SPECIFICATIONS Provides seven (7) field-selectable settings in the 135°— 174°F (57.20 — 78.9°C) temperature range Tr-color detector-status light-emitting diode (LED) with 3600 viewing Compatible with Model DPU (device programmer I loop tester) Utilizes advanced microprocessor-based signal processing Polarity insensitive utilizing Sure Wire technology .• - t Provides a low-temperature warning at 40°F (4.4°C) J l.•' '1; Each detector is self-testing: complete diagnostics performed every 10 seconds Compatible with Model D13-1 1—series mounting bases Field programmable as rate-of-rise or fixed temperature '(/ _- Compatible with Siemens Model 'H'-series devices on the same loop (with FireFinder®XLS and Desigo fire systems) - Superior EMI I RFI immunity • ®UL5;lListed and @ULC Listed; Restriction of Hazardous Substances FM C3230,3210), (RoHS) compliant CSFM (#72720067:0258) Approved Product Overview The Model FDT421 Intelligent Thermal (Heat) Detector provides an advanced method of detection, address programming and supervision -combined with sophisticated FACP communication. Model FDT421 uses a state-of-the-art thermistor, microprocessor and advanced signal analysis, providing high reliability and accuracy. Further, Model FDT421 is a cost-effective two-wire I addressable thermal detector that provides a unique, advanced feature: field-selectable temperature settings specially tailored for application-specific detection needs. Model FDT421 provides seven (7) field-selectable temperature-range settings: 1350F (57°C) - 174°F (79°C) with fixed and rate-of-rise programmability. This variance provides the customer with maximum flexibility to program the temperature settings to suit multiple application needs and changing environmental conditions. Additionally, Model FDT421 can be configured to provide a low-temperature warning signal at 40°F (4.40C). With use of a compatible FACP (FireFinder XLS and Desigo Fire Safety panels), this feature serves as prevention of water freezing in pipes for sprinkler systems, and meets NFPA 72 code. Model DPU Model FDT421 is compatible with the Siemens field-device programmer/ test unit (Model DPU), which is a compact, portable, menu-driven accessory for electronically programming and testing detectors, easily and reliably. Model DPU eliminates the need for cumbersome, unreliable mechanical programming methods - such as dials or switches—and reduces installation and service costs by electronically programming and testing the detector prior to installation. Each detector consists of a solid state, non- mechanical thermal sensor, and microprocessor-based electronics with a low-profile plastic housing. Model FDT421 is®Underwriters' Laboratories (®UL521) Listed as a thermal (heat) detector. Thermal (Heat) Detector 6151 SIEMENS Industry, Inc. Building Technologies Division Product Overview— (continued) Each Model FDT421 detector base also contains a provision for an optional, concealed locking mechanism to prevent unauthorized removal of the detector head (Model LK-1 1.) For proper operation of Model DPU, the technician selects the accessory's program mode, and enters the desired address. In turn, Model DPU automatically sets and verifies the address, as well as tests the detector. When in the 'test mode, Model DPU will perform a series of diagnostic tests without altering the address or other stored data, allowing techs to determine if the detector is operating properly. Model DPU operates on AC power or rechargeable batteries, providing flexibility and convenience in programming and testing equipment from practically any location. Operation Model FDT421 also utilizes a modern, accurate and shock- resistant thermistor to sense temperature changes: I Thermister Each Model FDT421 detector provides seven (7) pre- programmed, FACP-selectable parameter sets. Detector Supervision and Testing Model FDT421, which is listed as a self-testing device, contains a tn-color light emitting diode (LED) indicator, capable of flashing any one (1) of three (3) distinct colors: Green, Yellow, or Red. During each flash interval; the microprocessor-based detector monitors the folloing: Temperatures reaching programmed thresholds Internal sensors and electronics are functional Based on the monitoring results, the LED indicator flashes the following colors based on the following conditions: lash Flash Color Condition Interval (in seconds) Normal supervisory operation. Green*: Temperature has not reached 10 programmed alarm thresholds or set points. Yellow: Detector is in trouble and 4 needs replacement. Red: Alarm condition. 1 No Flash: Detector is not powered. - * LED can be turned OFF. Please follow the corresponding description of the panelused. SIEMENS Industry, Inc. Building Technologies Division A quick visual inspection is sufficient to indicate the condition of the detector at any time. If more detailed information is required, a printed report can be provided from the Model FC20-series FACPs indicating the status and settings assigned to each individual detector. Installation All Model FDT421 detectors use a surface-mounting base, Model DB-1 1 or Model DB-1 1 E, which mounts on a 4-inch octagonal, square or single-gang electrical box. The base utilizes screw-clamp contacts for electrical connections and self-wiping contacts for increased reliability. The Model DB-1 1 base can be used with the optional Model LK-1 1 detector locking kit, which contains 50 detector locks and an installation tool to prevent unauthorized removal of the detector head. Model DB-1 1 has decorative plugs to cover the outer mounting screw holes. Model FDT421 may be installed on the same initiating circuit with the following Siemens Model 'H'-series detectors [when used with FireFinder XLS and Desigo Fire Safety panels] - Model HFP-1 1 Model 'HMS'-series manual stations Model 'HTRI'-series interfaces Model HCP output-control devices Model 'HZM'-series of addressable, conventional zone modules Application Data Installation of Model FDT421 detectors requires a (2) two- wire circuit. In many retrofit cases, existing wiring may be used. T-tapping' is permitted only for Style 4 (Class B) wiring. Model FDT421 is polarity insensitive, which allows a substantial reduction in installation and debugging time. Model FDT421 can be applied within the maximum 50-feet center spacing (2,500 sq. ft. areas), per ®UL This application guideline is based on ideal conditions— specifically, smooth ceiling surfaces, minimal air movement, and no physical obstructions between potential fire sources and the actual detector. Do not mount detectors in close proximity to ventilation or heating and air conditioning outlets. Exposed joints or beamed ceilings may also affect safe spacing limitations for detectors. Should questions arise regarding detector placement, observe NFPA 72 guidelines. Good fire-protection system engineering and common sense dictate how and when fire detectors are installed and used. Contact your local Siemens- Fire Safety distributor or sales office whenever you need assistance applying Model FDT421 in unusual applications. Be sure to follow NFPA guidelines and ®UL Listed I OULC Listed installation instructions - included with every Siemens - Fire Safety detector - and local codes as for all fire protection equipment. Specifications Model FDT421 is a plug-in, (2) two-wire thermal (heat) detector, compatible with FireFinder XLS and Desigo Fire Safety panels. Each Model FDT421 detector has microcomputer-chip technology and highly stable, solid- state electronic circuitry. The Model FDT421 detector utilizes a modern, accurate and shock-resistant thermistor to sense temperature changes. This electronic-sensing method virtually eliminates thermal lag associated with mechanical temperature-sensing devices, and provides almost instantaneous temperature status to the FACP. Model FDT421 provides seven (7) field-selectable, pre- programmed temperature settings: Fixed 1 35°F (570C) Fixed 145°F (630c) Fixed 155°F (680c) Fixed 165°F (74°C) Fixed 174°F (79°c) Rate-of-Rise: 15°F! mm. (8.3°c) at fixed 1 35°F (570c) Rate-of-Rise: 15°F ! mm. (8.30c) at fixed 174°F (79°C) Additionally, the Model FDT421 detector has the following optional feature: Model FDT421 provides indication of potential freezing for sprinkler systems, via a configuration for reporting a low-temperature warning of 40°F (4.4°c). This feature is compatible with Models FC2025, FC2050 and FireFinder XLS. Technical Data Operating Temperature +32°F (0°C) to 100°F (38°C) Range: [with 135°F (57°C) alarm-threshold setting] Relative Humidity: 0-95%; non-condensing Air Pressure: No effect Input Voltage Range: 1 6VDC - 3OVDC Alarm Current (max.): 41 OpA Standby Current (max.): 250pA, max. (Average) Maximum Spacing: 50-foot centers (2,500 sq. ft.), per NFPA 72 and ULC-S524 Thermal Rating: Model FDT421 provides up to seven (7) field-selectable, pre- programmed temperature settings: Fixed 135°F (57°C) Fixed 145°F (63°C) Fixed 155°F (68°C) Fixed 165°F (74°C) Fixed 174°F (79°C) Rate-of-Rise: 1 5°F I mm. (8.3°C / mm) at fixed 135°F (57°C) Rate-of-Rise: 157 / mm. (8.3°C / mm) at fixed 174°F (79°C) Detector Weight: 0.32 Lbs. (0.144 Kg.) SIEMENS Industry, Inc. Building Technologies Division Compatible FACPs Model Data Sheet Number Description - 6300 FireFinder XLS FC2005 6813 50-point addressable FACP FC2025 6815 252-point addressable FACP FC2050 6815 504-point addressable FACP Details for Ordering Model Part Number Description FDT421 554320-F5-A1 Thermal (Heat) Detector DB-1 1 500-094151 Detector Mounting Base DB-1 1 E 500-094151 E Detector Base {small} DB2-HR S54320-F1 2-Al Relay Base RL-HC 500-033230 Remote Alarm Indicator: 4" octagon-box mount, red RL-HW 500-033310 Remote Alarm Indicator: Single-gang box mount, red LK-1 1 500-695350 1 Base Locking Kit I 511-9604 I - I STI Mechanical Protection Guard See: www.STI-USA.com for further details on ordering Model STi-9604. In Canada, order: I Part I Model I Number Description DB-1 1 C 500-095687 I Detector Mounting Base for Series 11 Detectors (ULC Listed) Mounting Diagram Dimensions 4.13 (10 cm)—.-- PD I .3•• 4.9 Notice: This marketing data sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product's installation instructions. Fire Safety Fire Safety 8 Fernwood Road 1577 North Service Road SIEMENS Industry, Inc. Florham Park, Ni 07932 East Oakville, Ontario Building Technologies Division Tel: (973) 593-2600 sii-sj L6H 0H6 /Canada FAX: (908) 547-6877 Printed in USA. Tel: [905] 465-8000 uRL: www.usa.Siernens.com/Fire URL: www.Siemens.CA April 2014 Supersedes sheet dated 11/13 (Rev. 4) Electronic address programming is easy and dependable ®UL Listed & tULC Listed; FM, CSFM and NYCFD Approved SIEMENS Data Sheet Fire Safety Products HTRI-Series Interface Modules Models HTRI-D, HTRI-R and HTRI-S (and USCG-HPLATE for Marine installs) ARCHITECT AND ENGINEER SPECIFICATIONS Interfacing and supervising normally open (N.0) or normally closed (N.C) contacts Integral single-pole, double-throw (SPDT) relay on Model HTRI-R (up to 4 amps) Dual input on Model HTRI-D, using a single address Polarity insensitive with Sure WirelM technology Dynamic supervision Two-wire operation Multi-color light-emitting diode (LED) indicates system status: GREEN I AMBER I RED Mounts in a 4-inch (10.2 cm.) square, 2-1/4" (5.7 cm.) deep single-gang or double-gang back box Easy front access to programming port and wiring terminals Comes with 5"-x- 5" (12.7 -x- 12.7 cm.) plastic faceplate Separate metal cover plate required for use in Marine installations Electronic address programming is easy and dependable Device Programmer/ Tester programs and verifies address of the device and tests for proper functionality Product Overview The Siemens - Fire Safety HTRI-series Intelligent interface modules are designed to provide the means of interfacing direct shorting devices to the fire-alarm control panel (FACP) loop circuit. The HTRI-series modules provide the most advanced method of address programming and supervision on the market—combined with sophisticated control panel communication. Each HTRI-series interface module incorporates a microcomputer chip, and each interface module achieves the state of an 'intelligent device' through its microcomputer-chip technology, combined with its sophisticated, bi-directional communication capabilities with the FACP. Specifications The Siemens Mode HTRI-series intelligent interface modules are available in three (3) types: Model HTRI- D, as well as Models HTRI-S and HTRI-R, which are both designed to monitor a (N.0) or (N.C) dry contact. The interface module reports the status of the (N.0) or (N.C) contact to the control panel. Model HTRI-S can only monitor and report the status of the contact, while Model HTRI-R incorporates an addressable 'Form C' relay. The Model HTRI-R relay and contact device input are controlled at the same address. For the FACP, the relay and input contact can be controlled as a separate function. The relay is typically used where control or shunting of external equipment is required. The Model HTRI-D is a dual-input module that is designed to supervise and monitor two (2) sets of dry contacts. Model HTRI-D only requires one (1) address, but responds independently to each input. Model HTRI-D is ideal for monitoring a water-flow switch and its respective valve tamper switch. Model HTRI-D flashes twice - once for each address, and Model HTRI-R LED indicates a change of state in the relay. The device's microcomputer chip has the capacity of storing, in memory, identification information; as well as important operating-status data. HTRI Series Interface Modules 6304 SIEMENS Industry, Inc. Building Technologies Division Specifications (continued) Each Model HTRI device has a multi-color LED that flashes GREEN when operating in Normal; AMBER if unit is in Trouble condition, and RED to indicate a change of state. Field-Device Programmer Siemens - Fire Safety innovative technology allows HTRI-series intelligent interface modules to be programmed via the Device Programming /Test Unit: a compact, portable and menu-driven accessory that makes programming and testing an interface device faster, easier and more dependable than previous methods. The programmer I tester eliminates the need for mechanical addressing mechanisms, such as: program jumpers, DIP switches or rotary dials, since Model DPU electronically sets the HTRI-series interface address into the non-volatile memory of the interface microcomputer-chip. Vibration, corrosion and other conditions that deteriorate mechanical addressing mechanisms are no longer a cause for concern. The HTRI-series is fitted with screw terminals for connection to an addressable circuit, and s fully compatible on the same Siemens FACPs with Siemens Model 'H'-series intelligent detectors; Model 'HMS'-series addressable manual stations, or any other addressable intelligent modules (e.g. - Model HZM or Model HCP). Temperature and Humidity Range Model HTRI-series intelligent interface modules are ®UL Listed. Environmental operating conditions for HTRI-D, HTRI-R and HTRI-S modules are 32°F (0°C) to 120°F (49°C) with a relative humidity of no greater than 93%, non-condensing. Electrical Ratings Current Draw 1.3mA (Active or Standby) I Relay Ratings, Model HTRI-R Resistive: 4 Amps, 125 VAC 4 Amps, 30 VDC Electrical Ratings Relay Ratings, Model HTRI-R - (cont.'d) 3.5A, 120 VAC (0.6P.F.) 3.OA, 30 VDC (0.6P.F.) Inductive: 2.OA, 120 VAC(0.4P.F.) 2.OA, 120 VAC (0.35P.F.) 2.0A1 30 VDC (0.35P.F.) Mounting Diagram Models HTRI-S, HTRI-D and HTRI-R mount directly into a 4-inch (10.2 cm.) square, 2 1/4" (5.7 cm.)-deep box back box, or to a user-supplied double-gang back box. A 5" (12.7 cm.) square, off-white faceplate is included with each HTRI-series module. Note: For Marine installations, a metal cover faceplate (Model USCG-HPLATE) is available separately. The faceplate must be used to protect Siemens HTRI-series interface modules from receiving radio-frequency interference (RFI). MOUNTING SLOTS FOR 4-INCH SWITCH BOX 0 0 HTRI-S/-D/-R —MODULE I2 OUNTING FOR 2 >S' [1 HOLES WITCHPLATE MOUNTING SLOTS FOR DOUBLEGANG SWITCHBOX Details for Ordering Part Model Description Number HTRI-R 500-033300 Single Input Module with Relay HTRI-D 500-033360 Dual Input Module HTRI-S 500-033370 Single Input Module USCG- I Cover Plate for I *Metal HPLATE S54319-112-Al { HTRI Series Interface Modules *denotes for required use with Marine-only installations / applications Notice: This marketing data sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product's installation instructions. SIEMENS Industry, Inc. Building Technologies Division Fire Safety 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600 FAX: (908) 547-6877 URL: www.USA.Siemens.com1FIRE Fire Safety 1577 North Service Road East Oakville, Ontario (511-FS) L6H 01-16 / Canada Printed in U.S.A. Tel: [905] 465-8000 URL: www.5iemens.OA February 2016 Supersedes sheet dated 6/2015 (Rev. 6( SIEMENS Data Sheet Fire Safety & Security Products Intelligent Initiating Devices Intelligent Device Interface Module Model HTRI-M {STRI-M for Canada} ARCHITECT AND ENGINEER SPECIFICATIONS Interfaces and supervises normally open (N.O.) contacts: [i.e. - fire detection] Interfaces and supervises normally closed (N.C.) contacts: [i.e. - security detection] Compact size allows mounting in single-gang box behind equipment Polarity insensitive with Sure WireTM technology Innovative technology supports comprehensive system and interface communication • MI .Lr Dynamic supervision 1 I Two-wire operation REFERTOOSTLMSM Device Programmer! Test Unit programs and verifies address and SIEWNS test functionality .. p.a..,Wo At ®UL Listed, €ULC Listed; FM, CSFM and NYC Fire Department Approved - Product Overview Specifications The Intelligent Interface Module (Model HTRI-M) is designed to provide the means of interfacing direct shorting devices to the Device Program I Test Unit (Model DPU) for various Siemens -Fire Safety fire-alarm control panels (FACPs). Model HTRI-M provides the most advanced method of address programming and supervision -including sophisticated FACP-communication - in the fire and life safety market. Each Model HTRI-M interface module incorporates microcomputer-chip technology, and advanced bi-directional communication capabilities with the respective FACP. Model HTRI-M is designed to monitor a N.O. or N.C. dry contact, and reports the contact status to the FACP. The microcomputer chip for Model HTRl-M has the capacity of storing -in memory - identification information, as well as integral operating-status data. Each Model HTRI-M interface module is programmed, via Model DPU, which is a compact, portable and menu-driven accessory that makes programming and testinga given interface more accurately and efficiently than ever before. Model DPU eliminates the need for mechanical- addressing mechanisms -such as program jumpers, DIP switches or rotary dials - since Model DPU sets the interface address of Model HTRI-M into its microcomputer-chip, non-volatile memory electronically. Vibration, corrosion and other conditions that deteriorate mechanical-addressing mechanisms are no longer a cause for concern. Model HTRI-M is connected to Model DPU with the programming cable provided with the tester. This programming cable (P/N 110-694927)utilizes two (2) alligator clip connectors, to attach to the HTRI-M. Intelligent Device Interface Module 6308 SIEMENS Industry, Inc. Building Technologies Division Specifications - (continued) Model HTRI-M has five (5) leads [one (1) of the five (5) leads is for grounding], which are wired to the system with user-supplied wire nuts. Model HTRI-M is fully compatible on the same Model DLC circuit with all intelligent Siemens Model 'H'-series detectors; Model 'HMS'-series addressable, manual stations; or any other Model 'H'-series addressable intelligent modules (i.e. - Model HZM or Model HCP). Electrical Rating Current Draw: 1.5mA (Active or Standby) Details for Ordering Model Number Part Number Description HTRI-M 500-034000 Single-Input Intelligent Interface Module In Canada, order: Model Number Part Number Description STRI-M 500-034000c Single-Input Intelligent Interface Module For shipping-weight considerations, each Model HTRI-series is approximately 3.5 oz. (0.1 kg). Notice: This marketing data sheet is nDt intendea to be used for system design or installation purposes. For the most up-to-date information, refer to each product's installation instructions. Fire Safety Fire Safety 8 Fernwood Road 2 Kenview Boulevard SIEMENS Industry, Inc. Florham Park, NJ 07932 Brampton, Ontario June 2013 Building Technologies Division Tel: (973) 593-2600 SIHS L6T 5E4 I Canada supersedes sheet dated 12/I1 FAX: (908) 547-6877 Printed in U.S.A. Tel: (905) 799-9937 (Rev.3( URL: www.usa.Siemens.comtire FAX: (905) 799-9858 CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7165-0067:0508 Page 1 of 3 CATEGORY: 7165-- FIRE ALARM CONTROL UNIT (COMMERCIAL) LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ 07932 Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652 Email: evelyn.esteban@siemens.com DESIGN: Model Desigo Fire Safety Modular and Cerbrus Pro Modular fire alarm control unit. Local, auxiliary, remote station (protected premises), proprietary, central station (protected premises), releasing service, waterflow, mass notification and sprinkler supervisory service. Refer to listee's data sheet and control unit's installation instructions for additional detailed product description and operational considerations. System components: PMI-3, GPMI-3 Person Machine Interface FCM 2041-U2, FCM 2041-U3 Operator Interface PSC-12 Power Supply PTB Power Termination Board RPM Remote Printer Interface CRC-6 Relay Card CC-2, -5 Card Cage ZIC-4A Zone Indicating Card DLC Device Loop Card XDLC Device Loop Card MLC MXL Line Loop Driver Card HTSW-1 Tamper Switch NIC-C Network Interface Card 5128, 5129 Silent Knight Dialer/DACT LLM-1 Line Module FCM-6 Fan Control Module SCM-8 Switch Control Module LCM-8 LED Control Module CSB CAN Sounder Board PSX-12 Extender Power Supply SIM-16 Supervised Input Module OCM-16 Output Control Module RNI Remote Network Interface HTRI-M , -5, -D, -R Addressable Monitor Module CAB2-BB, CAB3-BB Enclosure CAB-MP Mounting Plate CAB2-BD, -RD, -XBD Enclosure Door 07-12-2018 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This, listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 24, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILL.O, Program Coordinator Fire Engineering Division Listing No. 7165-0067:0508 Page 2 of 3 CAB3-BD, -RD, -XBD Enclosure Door CAB1 -TK, CAB1 R-TK, CAB2-TK, Enclosure Trim Kit CAB2R-TK, CAB3-TK, CAB3R-TK Enclosure Trim Kit CAB-BATT Battery Box CAB-55-BRKT, CAB-100-BRKT Battery Bracket REMBOX2-MP Mounting Plate REMBOX2, REMBOX2R, REMBOX4, REMBOX4R; Remote System Enclosure REMBOX4-MP Mounting Plate MI-REM Remote PMI PM I-INTL PMI International SSD, SSD-C, SSD-C-REM System Status Display ZIC-2C Dual Channel Audio Card ZIC-813 NAC Card ZIC-SPC Strobe Power Conditioner HZM Conventional Zone module OD-LP, -BP, -GP Door plate ID-SP, -FP Door Plate CAB1, CAB1R Cabinet BP-61, BTX-1 BTX-2, BTX-3 Battery Sets HUM Loop Isolator Module REL-EOL, EL-33 Resistor Kits ILED-HC, ILED-HW Remote Alarm Lamp CDC-4 Conventional Detector Card XLS-RK19 Rack XDACT-ASSY Mounting Bracket Assembly MPF-RK Front Panel MPR-RK, PTB-RK Back Panels BP-RK Blank Plate SNU Single Node Upload XLS-MSE2-ADPT, XLS-MSE2R-ADPT Enclosure Door Adaptor Kit XLS-MSE3-ADPT, XLS-MSE"R-ADPT Enclosure Door Adaptor Kit XLS-MLE6-ADPT, XLS-MLE6F-ADPT Enclosure Door Adaptor Kit XLS-MME3-ADPT, XLS-MME3R-ADPT Enclosure Door Adaptor Kit XLS-RCC 1 -ADPT Remote Enclosure Door Kit XLS-RCCI3F-ADPT, XLS-RCCI3FR-ADPT Remote Enclosure Door Kit VPM VESDA peripheral moduie VPM-MP mounting bracket VESDA HLI KIT interface XDMC digital audio message card FCA2015-UI Serial digital alarm communicator transmitter (DACT) RATING: 120 VAC Primary Supply Input 24 VDC Output 07-12-2018 This listing is based upon technical data submitted by the appl,car,t. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation cf the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listees data sheet, installation instructions and/or other Date Issued: July 24, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division Listing No. 7165-0067:0508 Page 3 of 3 INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances, and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as fire alarm control unit for use with optional Voice Communication Accessories (CSFM Listing No. 6912-0067:237) and separately listed compatible initiating and indicating devices. Refer to manufacturer's Installation Manual for details. This control unit can generate a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition. Strobe devices can be controlled by the ZlC-4A for (synchronized or unsynchronized) operation. The ZIC-4A output can also be configured as connection to municipal tie, releasing service per NFPA 13 and NFPA 2001. This control unit meets the requirements of UL-864, 10th Edition Standard. NOTE: 1. For Fire Alarm Verification Feature (Delay of fire alarm), the maximum Retard/Reset/Restart period must be adjusted to 30 seconds or less. Combined with 7170-0067:236 XLDC device loop card provides 4 class A/B/X SLC loops with separately listed X series addressable devices (CSFM Listing No. 7300-0067-0501. 4.The separately listed PAD-5, PAD 5-MB, PAD-5-CLSA, and PAD-5-CDC (CSFM Listing No. 7135-0067:0507) can connect to the Desigo Fire Safety Modular or Cerbrus Pro Modular control unit via the P2 SLC loop. 07-12-2018 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 24, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-0067:0134 Page 1 of 1 CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ 07932 Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652 Email: evelyn.esteban@siemens.com DESIGN: Models DB4T, DB4TS, DB4F, DB4TF, DB4FS, DB3S, ADB3, ADBX3, DB-HR, *DB2HR DBX3RS, DB-1 1, DB-X1 iRS, ADBI60, ADB-1 1, ADBH-1 1,SBGA-34, ADBX-1 I and 8837 detector bases and Model DB-ADPT detector/base adapter. Suitable for use with Models RR2 or RR3 auxiliary relays. Model DB-1 I is suitable for use only with Model RR-1 I or RR-1 IF auxiliary relay. Models DB-11 base, ADBH-11 audible base, and DB-HR, *DB2HR relay bases are intended to be used with Models HFP-1 1, *HFpO..1 1 and HFPT-1 1 Intelligent Series smoke and heat detectors (CSFM Listing No. 7272-0067:0223 and 7270-0067:0224). Model SBGA-34 audible base is intended to be used with Models HFP-1 1, HFPT-1 1, or HFPO-1 I detectors (CSFM Listing No. 7272-0067:0223 and 7270-0067:0224), Models FDOT421, FD0421, 0H921 and 0P921 detectors (CSFM Listing No.7272-0067:0258), Models FDT421 and H1921 detectors (CSFM Listing No.7270-0067:0262), and Models FDOOT441, FDOOTC441, 00HC941 and 00H941 detectors (CSFM Listing No.7270-0067:0260). *Model DB2-HR Relay Base can be used also with intelligent Series smoke detectors type FDOT421, FD0421, 01-1921, 0P921 (CSFM Listing No.7272-0067:0258), FDT421, H1921 (CSFM Listing No.7270-0067:0262), and FDOOT44I, FDOOTC44I, OOHC94I, 00H941 (CSFM Listing No.7270-0067:0260). Refer to listee's data sheet for additional detailed product description and operational considerations. INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. Model DB-11, ADBH-11, SBGA-34, DB-HR and *DB2..HR may be installed on the ceiling or on the wall. MARKING: Listee's name or SIEMENS, model number, electrical rating and UL label. APPROVAL: Listed as detector bases for use with separately listed compatible smoke detector heads and fire alarm control units. *Rev. 04-15-14 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should rot be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 . Listing Expires June 3O,2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION 11 f2 OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7300-0067:0242 Page 1;of I CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ 07932 Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652 Email: evelyn.esteban@siemens.com DESIGN: Control Unit Accessories. Refer to listee's data sheet for detailed product description and operational considerations. Accessories are listed as follows: HTRI-S, -D, -R Addressable Switch Interface Module HTRI-M Addressable Interface Module HUM Loop Isolator Module HZM Conventional Zone Loop ILED-HC, -HW Remote Lamps RATING: INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, and UL label. APPROVAL: Listed as control unit accessories for use with separately listed fire alarm control units. Refer to listee's Installation Instruction Manual for details. NOTE: 11-04-2004 This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 3O,2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 7272-0067:0258 CATEGORY: 7272 -- SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC Page 1 of 1 LISTEE: : Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ 07932 Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652 Email: evelyn.esteban@siemens.com DESIGN: Models FD0421 and 0P921 photoelectric addressable smoke detectors. Models FDOT42I and 0H921 photoelectric smoke detector with complementary automatic heat detectors. All models are to be used with liste's separately listed base models DB-1 1 and DB-1 1 E. Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 13-33VDC INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listees name, model number, and UL label. APPROVAL: Listed as photoelectric type smoke detectors for use with listee's separately listed base models DB-11 and DB-IIE (CSFM listing number 7300-0067:134) and listee's separately listed alarm indicator models RL-HC and RL-HW (CSFM listing number 7300-0067:225). 07-12-11 mt This listing is based upon technical data submitted by the applicant. CSFM Fie Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should rot be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE CAL I FIRE SIN- LISTING No. CATEGORY: LISTEE: DESIGN: RATING: INSTALLATION MARKING: APPROVAL: 7270-0067:0262 Page 1 of 1 7270 -- HEAT DETECTOR Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ 07932 Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652 Email: evelyn.esteban@siemens.com Models FDT42I and H1921 fixed temperature/rate-of-rise heat detectors. Refer to listee's data sheet for additional detailed product description and operational considerations. 16-30 Vdc In accordance with listee's printed installation instructions, applicable codes & ordinances and in a manner acceptable to the authority having jurisdiction. Listees name, model number, temperature rating and UL label. Listed as heat detector for use with listee's separately listed compatible detector bases. 02-14-12 gt 014, This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement' or recommendation of the item listed. This listing should not be used to verify correct operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 3O,2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION OFFICE OF THE STATE FIRE MARSHAL _____ FIRE ENGINEERING -BUILDING MATERIALS LISTING PROGRAM LISTING SERVICE LISTING No. 3240-0067:0265 Page 1 of 1 CATEGORY: 3240 -- DUCT SMOKE DETECTOR HOUSING/BASE LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ 07932 Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652 Email: evelyn.esteban@siemens.com DESIGN: Models FDBZ492, FDBZ492-R, *FDBZ492..PR and FDBZ492-HR air duct housings. Accessories: Model FDBZ492-RTL; Remote alarm indicator Model FDBZ-WT; metal enclosure for indoor wet applications Refer to listee's data sheet for additional detailed product description and operational considerations. RATING: 16-27Vdc INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances and in a manner acceptable to the authority having jurisdiction. MARKING: Listee's name, model number, electrical rating, and UL label. APPROVAL: Listed as air duct housings for use with listee's separately listed detector heads. *Rev 08-13-13 gt This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed the test results and/or other data but does not make an independent verification of any claims. This listing is not an endorsement or recommendation of the item listed. This listing should not be used to verify correct ?VI operational requirements or installation criteria. Refer to listee's data sheet, ins:allation instructions and/or other Date Issued: July 01, 2018 Listing Expires June 30, 2019 Authorized By: DAVID CASTILLO, Program Coordinator Fire Engineering Division