Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
5823 NEWTON DR; ; FPC2017-0357; Permit
(ity of PERMIT REPORT Carlsbad Print Date: 01/25/2022 Permit No: FPC2017-0357 Job Address: 5823 NEWTON OR, CARLSBAD, CA 92008 Status: Closed - Finaled Permit Type: FIRE-Construction Commercial Work Class: Fire Sprinklers Parcel #: 2120504300 Track U: Applied: 11/30/2017 Valuation: $1,119,960.80 Lot #: Issued: 12/19/2017 Occupancy Group: Project U: Finaled Close Out: 12/14/2020 #of Dwelling Units: Plan #: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check U: Inspector: Plan Check #: Final Inspection: Project Title: Description: THERMO FISHER (PHASE 2) SPRINKLER TI 7-100 (86) FPContractor: MILLENNIUM FIRE PROTECTION CORP - INACTIVE 2950 SAN LUIS REV RD OCEANSIDE, CA 92058-1241 (760) 722-2722 FEE AMOUNT FIRE Expedited Plan Review Per Hour - Office Hours $330.00 FIRE NFPA 13 or 13R System 7 - 100 heads $536.00 Total Fees: $866.00 Total Payments To Date: $866.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 760-602-8561 f I www.carlsbadca.gov MILLENNIUM FIRE PROTECTION CORP. THERMOFISHE R NE fYTON.BLD G 5823 PHASE 2 Overhead Fire SP-rinkler Material Submittal TENANT IMPROVEMENT 2161201$ fecaor7-oo357 Table of Contents HYDRAULIC CALCULATIONS THERMO FISHER BLDG 5823 PHASE 2 MILLENNIUM FIRE PROTECTION 2950 SAN LUIS REY ROAD OCEANSIDE, CA 92058 760-722-2722 Job Name : 17-056 BLDG 5823 NEWTON PHASE 2 Building FP-003 Location : 5823 NEWTON DRIVE, CARLSBAD, CA 92008 Remote Area 1 Contract : 17-055 Data File 17-056 BLDG 5823 NEWTON PHASE 2 Area I (Current).WXF Computer Programs by Hydratec Inc. Revision: 50.52.1 1 1 MILLENNIUM FIRE PROTECTION Page 1 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 HYDRAULIC CALCULATIONS for Projectname: 17-055 BLDG 5823 THERMO FISHER PHASE 2 Location: 5823 NEWTON DRIVE, CARLSBAD, CA 92008 Drawing no: FP-003 Date: 11/07/2017 Design Remote area number: 1 Remote area location: HYDRAULICALLY MOST DEMANDING Occupancy classification: B, S-I Density: 0.10 - Gpm/SqFt Area of application: 1,540 - SqFt Coverage per sprinkler. 156.5- SqFt Type of sprinklers calculated: STANDARD QUICK RESPONSE No. of sprinklers calculated: 10 In-rack demand: N/A - GPM Hose streams: 100-GPM Total water required (including hose streams): 353.6 - GPM @ 78.6 - Psi Type of system: STANDARD - WET Volume of dry or preaction system: N/A - Gal Water supply information Date: Location: 5823 NEWTON DRIVE -Source: CITY OF CARLSBAD Name of contractor: Millennium Fire Protection Address: 2950 San Luis Rey Road / / Oceanside, CA 92058 Phone number: (760) 722-2722 Name of designer: BRYANT ARIAS Authority having jurisdiction: CITY OF CARLSBAD FIRE DEPARTMENT Notes: (Include peaking information or gridded systems here.) 10% CUSHION REDUCED FROM HYDRAULIC DATA PRIOR TO CALCULATIONS Computer Programs by Hydratec Inc. Revision: 50.52.1 Water Supply Curve C MILLENNIUM FIRE PROTECTION Page 2 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 City Water Supply: Demand: Cl - Static Pressure : 105 Dl - Elevation : 4.114 C2 - Residual Pressure: 78.4 D2 - System Flow : 253.587 C2 - Residual Flow : 1663.1 D2 - System Pressure : 78.623 Hose ( Demand) :100 D3 - System Demand : 353.587 Safety Margin : 24.860 150 140 - - 130 - - p120 R°ei E 100 S 90 2 C2 S 80 U 70 R6° E5° 40 30 20 10 I_I_I_I 200 400 600 800 1000 1200 1400 1600 1800 FLOW (NA 1.85) Computer Programs by Hydratec Inc. Revision: 50.52.1 Fittings Used Summary MILLENNIUM FIRE PROTECTION Page 3 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Fitting Legend Abbrev. Name % 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 24 Avc Alarm Vic 751 0 0 0 0 3 9 8 17 0 21 0 22 50 0 0 0 0 0 0 0 B NFPA 13ButterflyValve 0 0 0 0 0 6 7 10 0 12 9 10 12 19 21 0 0 0 0 0 E NFPA 13 90' Standard Elbow 1 2 2 3 4 5 6 7 8 10 12 14 18 22 27 35 40 45 50 61 I NFPA139O' Flow thruTee 3 4 5 6 8 10 12 15 17 20 25 30 35 50 60 71 81 91 101 121 Unit Summary Diameter Units Inches Length Units Feet Flow Units US Gallons per Minute Pressure Units Pounds per Square Inch Note: Fitting Legend provides equivalent pipe lengths for fittings types of various diameters. Equivalent lengths shown are standard for actual diameters of Sched 40 pipe and CFactors of 120 except as noted with * The fittings marked with a * show equivalent lengths -values supplied by manufacturers based on specific pipe diameters and CFactors and they require no adjustment. All values for fittings not marked with a * will be adjusted in the calculation for CFactors of other than 120 and diameters other than Sched 40 per NFPA. Computer Programs by Hydratec Inc. Revision: 50.52.1 Pressure / Flow Summary - STANDARD MILLENNIUM FIRE PROTECTION Page 4 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Node No. Elevation K-Fact Pt Actual Pn Flow Density Area Press Actual Req. Hi 9.5 5.6 7.81 na 15.65 0.1 156.5 7.0 1 9.5 K= K@ K2 17.99 na 15.65 2 10.95 17.48 na 3 11.01 17.79 na 3A 11.01 18.7 na 4 11.0 20.8 na 5 10.91 20.08 na 6 10.85 19.74 na 7 9.5 K= K @ K2 20.2 na 16.58 8 9.5 K= K@ K2 18.12 na. 15.71 9 11.0 17.6 na 10 11.05 17.91 na 10A 11.05 18.83 na 11 11.0 21.09 na 12 10.9 20.32 na 13 10.84 19.98 na 14 9.5 K= K @ K2 20.43 na 16.68 15 9.5 K= K @ K2 18.87 na 16.03 16 11.0 18.35 na 17 11.05 18.68 na 17A 11.05 19.63 na 18 11.0 21.98 na 19 10.9 21.18 na 20 10.84 20.82 na 21 9.5 K= K@ K2 21.27 na 17.02 22 9.5 K=K@K2 21.56 na 17.13 23 11.0 21.06 na 24 11.05 21.43 na 25 11.0 23.97 na 26 10.9 23.1 na 27 10.84 22.71 na 28 9.5 K= K @ K2 23.15 na 17.75 29 11.0 27.3 na 30 11.0 48.92 na 31 11.0 55.86 na 32 34.3 58.64 na 33 34.3 62.43 na 34 29.67 65.19 na 35 29.67 65.2 na 36 29.67 65.2 na 37 29.67 65.21 na 38 29.67 65.22 na 39 29.67 65.23 na 40 29.67 65.24 na 41 29.67 65.25 na 42 29.67 65.27 na 43 29.67 65.28 na 44 29.67 65.3 na 45 29.67 65.32 na TASR 29.67 65.42 na BASE -4.0 80.08 na TEST 0.0 78.62 na 100.0 46 9.5 K= K @ K2 24.51 na 18.27 47 11.0 24.03 na 48 11.05 24.45 na 49 10.9 26.32 na 50 10.84 25.88 na 51 9.5 K= K @ K2 26.3 na 18.92 52 34.3 61.8 na 53 30.0 64.95 na 54 30.0 64.96 na Computer Programs by Hydratec Inc. Revision: 50.52.1 Flow Summary - Standard MILLENNIUM FIRE PROTECTION Page 5 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Node No. Elevation K-Fact Pt Actual Pn . Flow Density Area Press Actual Req. 55 30.0 64.97 na 56 30.0 64.97 na 57 30.0 64.98 na 58 30.0 64.98 na 59 30.0 64.98 na 60 30.0 64.98 na 61 30.0 64.99 na 62 30.0 64.99 na 63 30.0 64.99 na 64 30.0 64.99 na 65 31.31 64.44 na 66 31.31 64.6 na 67 30.0 64.95 na 68 34.01 63.23 na 69 34.01 63.3 na 70 29.67 65.19 na 71 34.42 63.06 na 72 34.42 63.13 na 73 34.07 63.21 na 74 34.07 63.29 na 75 33.78 63.34 na 76 33.78 63.42 na 77 33.47 63.48 na 78 33.47 63.56 na 79 33.16 63.62 na 80 33.16 63.71 na 81 32.85 63.76 na 82 32.85 63.85 na 83 32.54 63.9 na 84 32.54 64.0 na 85 32.24 64.03 na 86 32.24 64.14 na 87 31.93 64.17 na 88 31.93 64.29 na 89 31.62 64.3 na 90 31.62 64.44 na 1A 9.5 K=K@K2 19.22 na 16.18 8A 9.5 K= K @ K2 19.37 na 16.24 iSA 9.5 K=K@K2 20.17 na 16.57 22A 9.5 K= K @ K2 20.92 na 16.87 46A 9.5 K= K@ 1<2 23.79 na 17.99 The maximum velocity is 24.25 and it occurs in the pipe between nodes 29 and 30 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams - 2007 MILLENNIUM FIRE PROTECTION Page 6 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv Notes ****** Point Qt Pf/Ft Eqv. Ln. Total Pf Pn HI 15.65 1.049 EqI 69.4 4.000 7.810 K Factor = 5.60 to 120.0 0.0 69.400 4.114 K2 15.65 0.0827 0.0 73.400 6.068 Vel = 5.81 0.0 15.65 17.992 KFactor= 3.69 1 15.65 1.049 0.0 1.450 17.992 K Factor@ node K2 to 120.0 0.0 0.0 -0.628 2 15.65 0.0828 0.0 1.450 0.120 Vel = 5.81 2 0.0 1.049 E 2.0 2.000 17.484 to 120.0 0.0 2.000 -0.026 3 15.65 0.0828 0.0 4.000 0.331 Vel = 5.81 3 0.0 1.049 T 5.0 6.000 17.789 to 120.0 0.0 5.000 0.0 3A 15.65 0.0826 0.0 11.000 0.909 Vel = 5.81 3A 16.18 1.049 1 5.0 1.830 18.698 to 120.0 0.0 5.000 0.004 4 31.83 0.3075 0.0 6.830 -2.100 Vel = 11.82 4 -48.41 1.049 T 5.0 3.250 20.802 to 120.0 0.0 5.000 0.039 5 -16.58 -0.0920 0.0 8.250 -0.759 Vel = 6.15 5 0.0 1.049 E 2.0 2.000 20.082 to 120.0 0.0 2.000 0.026 6 -16.58 -0.0920 0.0 4.000 -0.368 Vel = 6.15 6 0.0 1.049 0.0 1.350 19.740 to 120.0 0.0 0.0 0.585 7 -16.58 -0.0926 0.0 1.350 -0.125 Vel = 6.15 0.0 -16.58 -- 20.200 K Factor= -3.69 8 15.71 1.049 0.0 1.500 18.124 K Factor @ node K2 to 120.0 0.0 0.0 -0.650 9 15.71 0.0833 0.0 1.500 0.125 Vel = 5.83 9 0.0 1.049 E 2.0 2.000 17.599 to 120.0 0.0 2.000 -0.022 10 15.71 0.0832 0.0 4.000 0.333 Vel = 5.83 10 0.0 1.049 T 5.0 6.000 17.910 to 120.0 0.0 5.000 0.0 10A 15.71 0.0832 - 0.0 11.000 0.915 Vel = 5.83 1 O 16.23 1.049 T 5.0 2.250 18.825 to 120.0 0.0 5.000 0.022 11 31.94 0.3095 0.0 7.250 2.244 Vel = 11.86 11 -48.62 1.049 T 5.0 3.720 21.091 to 120.0 0.0 5.000 0.043 12 -16.68 -0.0930 0.0 8.720 -0.811 Vel = 6.19 12 0.0 1.049 E 2.0 2.000 20.323 to 120.0 0.0 2.000 0.026 13 -16.68 -0.0930 0.0 4.000 -0.372 Vel = 6.19 13 0.0 1.049 0.0 1.340 19.977 to 120.0 0.0 0.0 0.580 14 -16.68 -0.0925 0.0 1.340 -0.124 Vel = 6.19 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 7 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 0.0 -16.68 20.433 K Factor= -3.69 15 16.03 1.049 0.0 1.500 18.874 K Factor @ node K2 to 120.0 0.0 0.0 -0.650 16 16.03 0.0867 0.0 1.500 0.130 Vel = 5.95 16 0.0 1.049 E 2.0 2.000 18.354 to 120.0 0.0 2.000 -0.022 17 16.03 0.0865 0.0 4.000 0.346 Vel = 5.95 17 0.0 1.049 1 5.0 6.000 18.678 to 120.0 0.0 5.000 0.0 17A 16.03 0.0864 0.0 11.000 0.950 Vel = 5.95 17A 16.57 1.049 T 5.0 2.250 19.628 to 120.0 0.0 5.000 0.022 18 32.6 0.3212 0.0 -7.250 2.329 Vel = 12.10 18 49.62 1.049 T 5.0 3.720 21.979 to 120.0 0.0 5.000 0.043 19 -17.02 -0.0964 0.0 8.720 -0.841 Vel = 6.32 19 0.0 1.049 E 2.0 2.000 21.181 to 120.0 0.0 2.000 0.026 20 -17.02 -0.0965 0.0 4.000 -0.386 Vel = 6.32 20 0.0 1.049 0.0 1.340 20.821 to 120.0 0.0 0.0 0.580 21 -17.02 -0.0963 0.0 1.340 -0.129 Vel = 6.32 0.0 - -17.02 21.272 KFactor= -3.69 22 17.13 1.049 0.0 1.500 21.561 K Factor @ node K2 to 120.0 0.0 0.0 -0.650 23 17.13 0.0980 0.0 1.500 0.147 Vel = 6.36 23 0.0 1.049 E 2.0 2.000 21.058 to 120.0 0.0 2.000 -0.022 24 17.13 0.0978 0.0 4.000 0.391 Vel = 6.36 24 -34.00 1.049 T 5.0 6.000 21.427 to 120.0 0.0 5.000 4.786 24A -16.87 -0.0950 0.0 11.000 -1.045 Vel = 6.26 0.0 -16.87 25.168 KFactor -3.36 24 34.01 1.049 T 5.0 2.250 21.427 to 120.0 0.0 5.000 0.022 25 34.01 0.3473 0.0 7.250 2.518 Vel = 12.63 25 -51.76 1.049 T 5.0 3.720 23.967 to 120.0 0.0 5.000 0.043 26 -17.75 -0.1044 0.0 8.720 -0.910 Vel = 6.59 26 0.0 1.049 E 2.0 2.000 23.100 to 120.0 0.0 2.000 0.026 27 -17.75 -0.1042 0.0 4.000 -0.417 Vel = 6.59 27 0.0 1.049 0.0 1.340 22.709 to 120.0 0.0 0.0 0.580 28 -17.75 -0.1037 0.0 1.340 -0.139 Vel = 6.59 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 8 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. 'C' or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 0.0 -17.75 23.150 KFactor= -3.69 4 48.41 2.067 0.0 11.770 20.802 to 120.0 0.0 0.0 0.0 11 48.41 0.0246 0.0 11.770 0.289 Vet = 4.63 11 48.62 2.067 0.0 10.000 21.091 to 120.0 0.0 0.0 0.0 18 97.03 0.0888 0.0 10.000 0.888 Vet = 9.28 18 49.62 2.067 0.0 10.420 21.979 to 120.0 0.0 0.0 0.0 25 146.65 0.1908 0.0 10.420 1.988 Vet = 14.02 - 25 51.75 2.067 0.0 10.000 23.967 to 120.0 0.0 0.0 0.0 29 198.4 0.3338 0.0 10.000 3.338 Vet =18.97 29 55.19 2.067 0.0 41.140 27.305 to 120.0 0.0 0.0 0.0 30 253.59 0.5255 0.0 41.140 21.619 Vet = 24.25 30 0.0 2.469 E 6.0 25.350 48.924 to 120.0 0.0 6.000 0.0 31 253.59 0.2212 0.0 31.350 6.934 Vet = 16.99 31 0.0 2.067 2E 10.0 4.500 55.858 to 120.0 1 10.0 20.000 -10.091 32 253.59 0.5255 0.0 24.500 12.874 Vet = 24.25 32 -145.47 2.635 1 16.474 97.250 58.641 to 120.0 0.0 16.474 0.0 33 108.12 0.0333 0.0 113.724 3.785 Vet = 6.36 33 0.0 2.469 T 12.0 4.630 62.426 to 120.0 0.0 12.000 2.005 34 108.12 0.0457 0.0 -16.630 0.760 Vet = 7.25 - 34 10.48 6.357 0.0 10.500 65.191 to 120.0 0.0 0.0 0.0 35 118.6 0.0005 0.0 10.500 0.005 Vet = 1.20 35 10.38 6.357 0.0 10.500 65.196 to 120.0 0.0 0.0 0.0 36 128.98 0.0007 0.0 10.500 0.007 Vet = 1.30 36 10.42 6.357 0.0 10.500 65.203 to 120.0 0.0 0.0 0.0 37 139.4 0.0008 0.0 10.500 0.008 Vet = 1.41 37 10.59 6.357 0.0 10.500 65.211 to 120.0 0.0 0.0 0.0 38 149.99 0.0009 0.0 10.500 0.009 Vet = 1.52 38 10.86 6.357 0.0 10.500 65.220 to 120.0 0.0 0.0 0.0 39 160.85 0.0010 0.0 10.500 0.010 Vet = 1.63 39 11.26 6.357 0.0 10.500 65.230 to 120.0 0.0 0.0 0.0 40 172.11 0.0010 0.0 10.500 0.011 Vet = 1.74 40 11.76 6.357 0.0 10.500 65.241 to 120.0 0.0 0.0 0.0 41 183.87 0.0012 0.0 10.500 0.013 Vet = 1.86 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 9 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "Ct' or Ftngs Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 41 12.36 6.357 0.0 10.500 65.254 to 120.0 0.0 0.0 0.0 42 196.23 0.0013 0.0 10.500 0.014 Vel = 1.98 42 13.07 6.357 0.0 10.500 65.268 to 120.0 0.0 0.0 0.0 43 209.3 0.0015 0.0 10.500 0.016 Vel = 2.12 43 13.86 6.357 0.0 10.500 65.284 to 120.0 0.0 0.0 0.0 44 223.16 0.0018 0.0 10.500 0.019 Vel = 2.26 44 14.73 6.357 0.0 10.500 65.303 to 120.0 0.0 0.0 0.0 45 237.89 0.0019 0.0 10.500 0.020 Vel = 2.40 45 15.70 6.357 2E 35.205 7.200 65.323 to 120.0 0.0 35.205 0.0 TASR 253.59 0.0022 0.0 42.405 0.094 Vel = 2.56 - TASR 0.0 8.249 E 21.141 33.670 65.417 to 120.0 B 14.094 93.960 14.582 BASE 253.59 0.0006 Avc 58.725 127.630 0.080 - Vel = 1.52 BASE 0.0 8.27 0.0 600.000 80.079 to 140.0 0.0 0.0 -1.732 TEST 253.59 0.0005 0.0 600.000 0.276 VeI= 1.51 100.00 Qa = 100.00 353.59 78.623 __K Factor= 39.88 46 18.27 1.049 0.0 1.500 24.513 K Factor @ node K2 to 120.0 0.0 0.0 -0.650 47 18.27 0.1100 0.0 1.500 0.165 Vel = 6.78 47 0.0 1.049 E 2.0 2.000 24.028 to 120.0 0.0 2.000 -0.022 48 18.270.1102 0.04.000 0.441 Vel _6.78 48 -36.26 1.049 1 5.0 6.000 24.447 to 120.0 0.0 5.000 4.786 48A-17.99-0.1071 0.0 11.000 -1.178 Vel _6.68 0.0 -17.99 ,28.055 K Factor= -3.40 48 36.26 1.049 T 5.0 2.250 24.447 to 120.0 0.0 5.000 0.022 29 36.26 0.3912 0.0 7.250 2.836 Vel = 13.46 29 -55.18 1.049 T 5.0 3.720 27.305 to 120.0 0.0 5.000 0.043 49 -18.92 -0.1174 0.0 8.720 -1.024 Vel = 7.02 49 0.0 1.049 E 2.0 2.000 26.324 to 120.0 0.0 2.000 0.026 50 -18.92 -0.1175 0.0 4.000 -0.470 Vel = 7.02 50 0.0 1.049 0.0 1.340 25.880 to 120.0 0.0 0.0 0.580 51 -18.92 -0.1172 0.0 1.340 -0.157 Vel = 7.02 0.0 -18.92 26.303 K Factor -3.69 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 10 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes ****** Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 32 145.47 2.635 T 16.474 38.370 58.641 to 120.0 0.0 16.474 0.0 52 145.47 0.0576 0.0 54.844 3.160 Vel = 8.56 52 0.0 2.469 T 12.0 4.300 61.801 to 120.0 0.0 12.000 1.862 53 145.47 0.0791 0.0 16.300 1.290 Vel = 9.75 53 -10.49 6.357 0.0 10.500 64.953 to 120.0 0.0 0.0 0.0 54 134.98 0.0007 0.0 10.500 0.007 Vel = 1.36 54 -10.37 6.357 0.0 10.500 64.960 to 120.0 0.0 0.0 0.0 55 124.61 0.0006 0.0 10.500 0.006 Vel = 1.26 55 -10.42 6.357 0.0 10.500 64.966 to 120.0 0.0 0.0 0.0 56 114.19 0.0006 0.0 10.500 0.006 VeI 1.15 56 -10.59 6.357 0.0 10.500 64.972 to 120.0 0.0 0.0 0.0 57 103.6 0.0004 0.0 10.500 0.004 Vel = 1.05 57 -10.86 6.357 0.0 10.500 64.976 to 120.0 0.0 0.0 0.0 58 92.74 0.0004 0.0 10.500 0.004 Vel = 0.94 58 -11.26 6.357 0.0 10.500 64.980 to 120.0 0.0 0.0 0.0 59 81.48 0.0003 0.0 10.500 0.003 Vel = 0.82 59 -11.76 6.357 0.0 10.500 64.983 to 120.0 0.0 0.0 0.0 60 69.72 0.0002 0.0 10.500 0.002 Vel = 0.70 60 -12.37 6.357 0.0 10500 64.985 to 120.0 0.0 0.0 0.0 61 57.35 0.0001 0.0 10.500 0.001 Vel = 0.58 61 -13.06 6.357 0.0 10.500 64.986 to 120.0 0.0 0.0 0.0 62 44.29 0.0001 0.0 10.500 0.001 - Vel = 0.45 62 -13.86 6.357 0.0 10.500 64.987 to 120.0 0.0 0.0 0.0 63 30.43 0.0001 0.0 10.500 0.001 Vel = 0.31 63 -14.74 6.357 0.0 10.500 64.988 to 120.0 0.0 0.0 0.0 64 15.69 0.0 0.0 10.500 0.0 Vel = 0.16 64 0.0 2.469 T 12.0 1.310 64.988 to 120.0 0.0 12.000 -0.567 65 15.69 0.0013 0.0 13.310 0.017 Vel = 1.05 65 0.0 2.635 2T 32.948 135.620 64.438 to 120.0 0.0 32.948 0.0 66 15.69 0.0009 0.0 168.568 0.158 Vel = 0.92 66 0.0 2.469 T 12.0 1.650 64.596 to 120.0 0.0 12.000 0.710 45 15.69 0.0012 0.0 13.650 0.017 Vel = 1.05 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 11 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 0.0 15.69 65.323 K Factor= 1.94 53 10.49 6.357 0.0 10.500 64.953 to 120.0 0.0 0.0 0.0 67 10.49 0.0 0.0 10.500 0.0 Vet 0.11 67 0.0 2.469 T 12.0 4.010 64.953 to 120.0 0.0 12.000 -1.737 68 10.49 0.0006 0.0 16.010 0.010 Vet = 0.70 68 0.0 2.635 2T 32.948 135.620 63.226 to 120.0 0.0 32.948 0.0 69 10.49 0.0004 0.0 168.568 0.075 Vet = 0.62 69 0.0 2.469 T 12.0 4.350 63.301 to 120.0 0.0 12.000 1.880 70 10.49 0.0006 0.0 16.350 0.010, Vel = 0.70 70 0.0 6.357 0.0 10.500 65.191 to 120.0 0.0 0.0 0.0 34 10.49 0.0 0.0 10.500 0.0 Vet= 0.11 0.0 10.49 65.191 KFactor= 1.30 54 10.37 2.469 T 12.0 4.420 64.960 to 120.0 0.0 12.000 -1.914 71 10.37 0.0006 0.0 16.420 0.010 Vet = 0.69 71 0.0 2.635 2T 32.948 135.620 63.056 to 120.0 0.0 32.948 0.0 72 10.37 0.0004 0.0 168.568 0.073 Vet = 0.61 72 0.0 2.469 T 12.0 4.750 63.129 to 120.0 0.0 12.000 2.057 35 10.37 0.0006 0.0 16.750 0.010 Vet = 0.69 0.0 - 10.37 65.196 K Factor = 1.28 55 10.42 2.469 T 12.0 4.070 64.966 to 120.0 0.0 12.000 -1.763 73 10.42 0.0007 0.0 16.070 0.011 Vel = 0.70 73 0.0 2.635 21 32.948 135.620 63.214 to 120.0 0.0 32:948 0.0 74 10.42 0.0004 0.0 168.568 0.074 Vet = 0.61 74 0.0 2.469 T 12.0 4.400 63.288 to 120.0 0.0 12.000 1.906 36 10.42 0.0005 0.0 16.400 0.009 Vet = 0.70 0.0 10.42 65.203 K Factor 1.29 56 10.59 2.469 T 12.0 3.780 64.972 to 120.0 0.0 12.000 -1.637 75 10.59 0.0006 0.0 15.780 0.009 Vel = 0.71 75 0.0 2.635 2T 32.948 135.620 63.344 to 120.0 0.0 32.948 0.0 76 10.59 0.0005 0.0 168.568 0.077 Vel = 0.62 76 0.0 2.469 T 12.0 4.110 63.421 to 120.0 0.0 12.000 1.780 37 10.59 0.0006 0.0 16.110 0.010 Vel= 0.71 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 12 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 0.0 10.59 65.211 K Factor = 1.31 57 10.87 2.469 T 12.0 3.470 64.976 to 120.0 0.0 12.000 -1.503 77 10.87 0.0007 0.0 15.470 0.011 Vel = 0.73 77 0.0 2.635 21 32.948 135.620 63.484 to 120.0 0.0 32.948 0.0 78 10.87 0.0005 0.0 168.568 0.079 Vel = 0.64 78 0.0 2.469 T 12.0 3.800 63.563 to 120.0 0.0 12.000 1.646 38 10.87 0.0007 0.0 15.800 0.011 Vel = 0.73 0.0 10.87 65.220 K Factor 1.35 58 11.26 2.469 T 12.0 3.160 64.980 to 120.0 0.0 12.000 -1.369 79 11.26 0.0007 0.0 15.160 0.011 Vel = 0.75 79 0.0 2.635 2T 32.948 135.620 63.622 to 120.0 0.0 32.948 0.0 80 11.26 0.0005 0.0 168.568 0.085 Vel = 0.66 80 0.0 2.469 T 12.0 3.490 63.707 to 120.0 0.0 12.000 1.512 39 11.26 0.0007 0.0 15.490 0.011 Vel = 0.75 0.0 11.26 65.230 K Factor = 1.39 - 59 11.76 2.469 T 12.0 2.850 64.983 to 120.0 0.0 12.000 -1.234 81 11.76 0.0007 0.0 14.850 0.011 VeI= 0.79 81 0.0 2.635 21 32.948 135.620 63.760 to 120.0 0.0 32.948 0.0 82 11.76 0.0005 0.0 168.568 0.092 Vel = 0.69 82 0.0 2.469 T 12.0 3.180 63.852 to 120.0 0.0 12.000 1.377 40 11.76 0.0008 - 0.0 15.180 0.012 Vel = 0.79 0.0 -11.76 - 65.241 Factor= -K 1.46 60 12.36 2.469 T 12.0 2.540 64.985 to 120.0 0.0 12.000 -1.100 83 12.36 0.0008 0.0 14.540 0.012 - Vel = 0.83 83 0.0 2.635 2T 32.948 135.620 63.897 to 120.0 0.0 32.948 0.0 84 12.36 0.0006 0.0 168.568 0.101 Vel = 0.73 84 0.0 2.469 T 12.0 2.880 63.998 to 120.0 0.0 12.000 1.243 41 12.36 0.0009 0.0 14.880 0.013 Vet = 0.83 0.0 12.36 65.254 KFactor= 1.53 61 13.06 2.469 T 12.0 2.240 64.986 to 120.0 0.0 12.000 -0.970 85 13.06 0.0009 0.0 14.240 0.013 Vet = 0.88 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 13 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 85 0.0 2.635 2T 32.948 135.620 64.029 to 120.0 0.0 32.948 0.0 86 13.06 0.0007 0.0 168.568 0.113 Vet = 0.77 86 0.0 2.469 T 12.0 2.570 64.142 to 120.0 0.0 12.000 1.113 42 13.06 0.0009 0.0 14.570 0.013 VeI= 0.88 0.0 13.06 65.268 K Factor = 1.62 62 13.86 2.469 T 12.0 1.930 64.987 to 120.0 0.0 12.000 -0.836 87 13.86 0.0011 0.0 13.930 0.015 VeI = 0.93 87 0.0 2.635 21 32.948 135.620 64.166 to 120.0 0.0 32.948 0.0 88 13.86 0.0007 - 0.0 168.568 0.125 Vet = 0.82 88 0.0 2.469 T 12.0 2.260 64.291 to 120.0 0.0 12.000 0.979 43 13.860.0010 0.014.260 -0.014 Vet _0.93 0.0 13.86 65.284 - K Factor= 1.72 63 14.74 2.469 T 12.0 1.620 64.988 to 120.0 0.0 12.000 -0.702 89 14.74 0.0012 0.0 13.620 0.016 Vel = 0.99 89 0.0 2.635 2T 32.948 135.620 64.302 to 120.0 0.0 32.948 0.0 90 14.74 0.0008 0.0 168.568 0.140 Vet = 0.87 90 0.0 2.469 T 12.0 1.950 64.442 to 120.0 0.0 12.000 0.845 44 14.740.0011 _0.013.950 0.016 VeI=0.99 0.0 14.74 65.303 K Factor = 1.82 1A 16.18 1.049 0.0 1.450 19.225 K Factor@ node K2 to 120.0 0.0 0.0 -0.654 3A 16.180.0876 0.0 1.450 0.127 -Vel =6.01 0.0 16.18 18.698 K Factor = 3.74 8A 16.24 1.049 0.0 1.450 19.368 K Factor @ node K2 to 120.0 0.0 0.0 -0.671 1OA 16.240.0883 0.0 1.450 0.128 VeI=6.03 0.0 16.24 18.825 K Factor = 3.74 ISA 16.57 1.049 0.0 1.450 20.166 K Factor@ node K2 to 120.0 0.0 0.0 -0.671 17A 16.57 0.0917 0.0 1.450 0.133 Vet = 6.15 0.0 16.57 19.628 K Factor = 3.74 22A 16.87 1.049 0.0 1.450 20.915 K Factor @ node K2 to 120.0 0.0 0.0 4.114 24A 16.87 0.0959 0.0 1.450 0.139 Vet = 6.26 Computer Programs by Hydratec Inc. Revision: 50.52.1 Final Calculations - Hazen-Williams MILLENNIUM FIRE PROTECTION Page 14 17-056 BLDG 5823 NEWTON PHASE 2 Date 3-20-2018 Hyd. Qa Dia. Fitting Pipe Pt Pt Ref. "C" or Ftng's Pe Pv ******* Notes Point Qt Pf/Ft Eqv. Ln. Total Pf Pn 0.0 16.87 25.168 KFactor 3.36 46A 17.99 1.049 0.0 1.450 23.786 K Factor @ node K2 to 120.0 0.0 0.0 4.114 48A 17.99 0.1069 0.0 1.450 0.155 VeI = 6.68 0.0 17.99 28.055 K Factor= 3.40 Computer Programs by Hydratec Inc. Revision: 50.52.1 FM Approved and UL Listed Sprinkler Pipe Bull Moose Tube Company is a recognized producer of quality pipe products. Our Schedule 10 and Schedule 40 are FM Approved and UL Listed (for U.S. and Canada), even though these products do not require separate approvals and listings. Bull Moose Tube made the decision to have them approved and listed for your peace of mind. Our Sch. 10 and Sch. 40 have been through the same rigorous testing as our other fine pipe products. Bull Moose Tube's Sch. 10 and Sch. 40 pipes are made to ASTM A135 and ASTM A795. These products are typically supplied with our protective coating but can be supplied without the coating so they can be hot-dip galvanized to meet FM requirements for use in dry systems in accordance with the zinc coating specifications of ASTM A795 or ASTM A53. Schedule 10 Pipe 1 1.315 1.097 1.41 lbs/ft 91 11/4 1.660 1.442 1.81 lbs/ft 61 11/2 1.900 1.682 2.09 lbs/ft 61 2 2.375 2.157 2.64 lbs/ft 37 21/2 2.875 2.635 3.53 lbs/ft 30 3 3.500 3.260 4.34 lbs/ft 19 4 4.500 4.260 5.62 lbs/ft 19 Schedule 40 Pipe f[ ) 5:4 I 1 1315 1.049 1,68 lbs/ft 70 1 1/4 1.660 1 380 .2 .27 lbs/ft 51 11/2 1.900 1.610 2.72 lbs/ft 44 2 2.375 2.067 3.66 lbs/ft 30 2 1/2 . 2.875 2.468 5.80 lbs/ft 30 3 3.500 3.068 7.58 lbs/ft 19 4 4.500 4.026 10.80 lbs/ft 19 PIPE PREPARATION For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer's instructions for the specific fitting used. .1819 Clarkson Road For additional information, u (N 6 Chesterfield, MO 63017 contact your salesperson C L US (800) 325-4467 todayat (800) 325-4467 or LISTED BULL. MOOSE TUBE COMPANY FAX: (636) 537-2645 (636) 537-2600 in the USA, ______ www.buflmoosetube.com or from Canada FM " ACAPRV company e-mail: sa1es(bu11moosetube.com call (800) 882-4666 <i APPROVED All information contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation. 7/09 tjjCD /Fire & Building I Products Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 Grinnell Grooved Fire Protection Products Fire Protection Submittal Sheet Listing and Approval Information Page lof8 MARCH 2011 TFPI800 Page 2 of 8 TFPI800 Figure Nominal Size Inches Nominal Size mm PipeSchedule Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) Figure F 705 1114,1V2,2 42.4,48.3,60.3 Sch 5, ID,WST 175 175 175 - - 1'I4, 11/2,2,21/2 42.4,48.3,60.3,73.0 Sch 10, Sch 40 300 300 300 - - 3,4,5,6,8 88.9,114.3,141.3,168.3, 219.1 Sch 10, Sch 40 300 300 300 - - 10,12 273.0, 323.9 Sch 10, Sch 40 250 250 250 - - 1V4, 11h, 2,21h, 3 42.4, 48.3, 60.3, 73.0, 88.9 ME 300 300 300 - - 4 114.3 ME - - 300 - - 11/4, 11/2, 2, 22/2, 3,4 42.4, 48.3, 60.3, 73.0, 88.9, 114.3 OF 300 300 300 - - 11/4,11/2,2,21/2,3,4 42.4,48.3,60.3, 73.0,88.9,114.3 ELF 300 300 - - - 11/2, 2,21h, 3,4 48.3, 60.3,73.0,88.9,114.3 FE 300 300 300 - 1 11/4 11/2 2 337 42.49 483 603 MLT EZT 300 300 300 — — 3 88.9 EZ 300 300 300 - - 4 114.3 EZ 250 250 300 - - 6 168.3 17591 EZ 250 250 - - 11/4,11/2,2 42.4,48.3, 60.3 BLT, DT, TL, Gal 7, Gal Flo 300 300 300 - - 11/4,11/2,2 42.4,48.3t 60.3 GL, MLT, MI, SL, WLS 300 300 - - - 11/4, 11/2,2 42.4,48.3,60.3 UE - - 175 - - 76.1, 165.1 BS1387 300 300 300 - - 42.4, 48.3, 60.3, 76.1, 88.9,114.3 BS1387, ISO 4200 - - - 16 20 139.7 BS1387, ISO 4200 - - - 16 - 165.1 B51387, ISO 4200 - - - - 20 168.3, 219.1 ISO 4200 - - - 16 20 108.0,133.0,159.0 ISO 4200 300 - 300 - - 216.3 JIS G3452 300 - 300 - - - Figure 707 11/2,2, 21/2 48,3,60.3,73.0 Sch 5, UE,WST 175 175 175 - - 11/2,2,21/2,3,4,5 48.3, 60.3,73.0,88.9,114.3, 141.3 Sch 10 450 450 450 - 6,8,10,12 168.3, 219.1, 273.0, 323.9 Sch 10 450 450 450 - 11/2,2,21/2,3,4,5 48.3, 60.3,73.0,88.9,114.3, 141.3 Sch 40 500 500 500 - - 6,8,10,12 168.3,219.1,273.0,323.9 Sch 40 500 500 500 - - 11/2,2,21/2, 3,4 48.3, 60.3,73.0,88.9,114.3 ME, OF, FF, SF, STE 300 300 300 - - 2 60.3 - EZT 300 - - - - 3 88.9 EZ 300 300 300 - - 4 114.3 EZ 250 250 300 - - 6 168.3 EZ 250 250 175 - - 11/2,2,21/2, 3 48.3, 60.3,73.0, 88.9 XL 300 300 300 - 11/2,2 48.3, 60.3 GL, MI, MLT, IL 300 300 300 - - 11/2,2 48.3, 60.3 Gal 7, Gal Flo 300 300 300 - - - 11/2, 2 — 48.3,60.3 BLT, OT - - 300 - - 14,16 355.6,406.4 Sch 30 300 - - - - 18,20 457.2,508.0 Sch 30 200 - - - - 24 610.0 Sch 20 - 250 1 - - - 76.1,165.1 - BS1387, ISO 4200 300 - 300 - 20 - 48.3, 60.3,88.9,114.3,168.3 BS1387, ISO 4200 - - - - 20 219.1, 273.0,323.9 - ISO 4200 - - - 16 20 0 Figure 71 2 60.3 Sch 5,IO,UE,WST 175 175 175 - 2,21/2,3,4,5 60.3,73.0,88.9,114.3,141.3 Sch 10, Sch 40 250 250 250 - - 6,8 168.3, 219.1 Sch 10, Sch 40 — 250 250 250 - - 10,12 273.0, 323.9 Sch 40 250 250 250 - - 2 60.3 BLT, DI, E, FF, GL, IS 250 250 250 - - 2 60.3 MT, MLT, TL, WLS,XL 250 250 250 - - 2 60.3 Gal 7, Gal Flo 250 250 250 - - 2 60.3 MF,FF - - 250 - - 2,21/2,3,4 60.3, 73.0,88.9,114.3 DF, FF, ME,SF 250 250 250 - - 3,4 88.9,114.3 EZ 250 250 250 - - 6 168.3 EZ 250 250 175 - - 2,3,4 60.3, 88.9,114.3 SIF 250 250 250 - - 21/2,3 73.0,88.9 XL 250 250 250 - - Figure 71 PN16 60.3, 76.1, 88.9, 114.3, 168.3 BS1387, ISO 4200 250 - 250 16 20 139.7 B51387, ISO 4200 250 - 250 16 - 165.1 B51387, ISO 4200 250 - 250 - 20 219.1, 273.0 ISO 4200 250 - 250 - 20 323.9 ISO 4200 250 - 250 - 16 TFPI800 Page 3 of 8 Figure Nominal Size Inches Nominal Size mm Pipe Schedule Rated Pressure Figure 772 Patented 11/, 11/2, 2 42.4,48.3,60.3 Sch 5, ID, UE, WST 175 175 175 - - 11/4 42.4 Sch lo, Sch 40 300 300 300 - - 11/2,2,21/2,3,4 48.3,60,70,88.9,114.3 Sch 1O, Sch 40 500 500 500 - - 5,6 141.3,168.3 Sch 10 300 300 300 - - 8 219.1 Sch 10 400 400 400 - - 5 141.3 Sch 40 300 300 300 - - 6 168.3 Sch 40 400 400 400 - - .8 219.1 Sch 40 450 450 450 - - 10,12 273.0,323.9 Sch 10, Sch 40 250 250 250 - - 1V4,11/2,2,21/2,3 42,4,48.3,60.3,73.0,88.9 MF 300 300 300 - 4 114.3 EZ, MF 250 250 300 - - 3 88.9 EZ 300 300 300 - - 6 168:3 EZ 250 250 300 - - 11/2,2,21/2.3,4 483 603 7 0 889 1143 - OF STF 300 300 300 - 11/4,11/2,2,21/2,3 42.4,48.3,60.3,73.0,88.9 ftF 300 300 - 4 114.3 - FLF 250 250 - - - 11/2,2,21/2,3 48.3,60.3,73.0,88.9, FF 300 300 300 - 4 - 114.3 FF 250 250 300 - 11/4,11/2,2 42.4,48.3,60.3 EZT, rTr, MLT, WLS 300 300 300 - - 11/4,11/2,2 42.4, GL, Gal 7, Gal Flo 300 300 300 - - 11/2,2 48.3,60.3 BLT,DT 300 300 300 - - 11/2,2 48.3,60.3 TI, XL 300 300 - - ._76.1,165.1 8S1387 300 300 300_ - - 42.4,48.3 60.3,76.1,88,9,114. 881387, ISO 4200 - - - 16 20 139.7 8S1387, ISO 4200 - - - 16 - 165.1 881387, 1S04200 - - - - 20 168.3,219.1, 273.0,323.9 Iso 4200 - - - 16 20 O Figure 716 2X11/2,21/2X2,3x2 60.3 x 48.3,73.0 x 60.3,88.9 x 60.3 Sch5 175 175 175 - - 3x21/2,42,421/2 88.9x73.0,114.3x60.3,114.3x73.0 Sch5 175 175 175 1 - - 2x11/2,21/2X2,3X2 60.3x48.3,73.0x60.3,88.9x60.3 Sch 1O, Sch 40 350 350 350 - - 3X21/2,42,421/2 88.9x73.0,114.3x60.3,114.3x73.0 Sch lO, Sch 40 350 350 350 - - 4x3,5x4 114.3 x 88.9,141.3,114.3 Sch lo, Sch 40 350 350 300 - 6x4,6x5 168.3 x 114.3 x 1638.3 x 141.3 Sch lo, Sch 40 350 350 300 - - 8x6 219.1 x168.3 Sch 40 350 350 300 - - 2 x 11/2,21/2x 2, 3 x2 60.3 x48.3, 73.0 x 60.3,88.9 x 60.3 OF, EZT, FF, GL, MF 300 300 300 - - 2x11/2,21/2X2,3X2 60.3 x48.3,73.0 x 60.3,88.9x 60.3 MT, MLT, SF, STF, TL 300 300 300 - 42 114,3x6O.3 DF, Er, FF, GL, MF 300 300 300 - 4 x 2 114.3x60.3 MT,MLT,SF, STF, TL 300 300 300 - - _/z3j 88.9x73.0,114.3x73.0,114.3X88.9 OF, MF, SF 300 300 300 - - _fjLjj•, 114.3x73.0, 114.3x88.9 FF, STF 300 300 300 141.3 x 114.3,168.3 x 114.3 DF, FF, SF, STF 300 300 300 - _21/2 88.9x60,3,88.9x73.0 EZ 300 300 300 - 2 x 11/2 60.3 x48.3 Gal 7, Gal Flo 300 300 300 60.3 x 48.3,73.0 x 60.3,88.9 x 60.3 8S1387, ISO 4200 300 - 300 16 20 88.9 x 76.1,114.3 x 60.3,114.3 x76.1 8S1387, ISO 4200 300 - QQ. 16 20_ 114.3x88.9 8S1387, ISO 4200 300 - 300 16 20 168.3x 114.3, 219.1 x168.3 ISO 4200 300 - 300 16 20 139.7x114.3 8S1387, ISO 4200 300 - 300 16 165.1x114.3 8S1387, ISO 4200 300 - 300 - 20 ! Figure 40-5e 11/4,11/2,2 x 1/2,3/4,1 42.4,48.3,60.3 x 21.3,26.7,33.7 Sch 5, Sch 10, Sch 40 175 175 175 - - 11/4,11/2, 2 X V2, /4,1 42.4,48.3,60.3 x 21.3,26.7,33.7 BLT, OF, OT, GL, LS, MF 175 175 175 - - 11/4,11/2,2 x 1/2,3/4,1 42.4,48.3,60.3 x 21.3,26.7,33.7 MI, MLT, IL, WLS, XL 175 175 175 - - 11/4,11/2,2 x 1/2,3/4,1 42.4,48.3, 60.3 x 21.3,26.7,33.7 Gal 7, Gal Rb 175 175 175 - - V/4,1'/2XV2,3/4,1 42.4,48.3 x 21.3,26.7,33.7 EZT 175 175 175 - - 11/2X1/2,3/4,1 48.3x21.3,26.7,33.7 FF 175 175 175 - - 21/2 X 1/2,3/4,1 73.0 x 21.3,26.7,33.7 Sch 10, Sch 40 175 175 1 175 - - 21/2X1/2,3/4,1 73.0x21.3,26.7,33.7 OF, MF, STF, XL 175 175 1 175 - - 11/2, 2 x 1/2,3/4,1 48.3,60.3 x 21.3,26.7,33.7 STF 175 175 175 - - Figure 40-5 Straps are UL and ULC Listed and FM Approved with NPT and ISO threaded outlets as specified in the chart. Page 4 of 8 TFPI800 Figure Nominal Size Inches Nominal Size mm Pipe Schedule Rated Pressure (psi-UL. ULC and FM; bar 1PCB and VdS) Figure 730 Threaded*t 2 X 1/2, 3/4, 1, 11/4, 11/2 60.3 x 21.3, 26.7, 33.7, 42.4, 48.3 Sch 5 175 175 175 - - 2 X 1/2, 3/4, 1, 11/4, 11/2 60.3 x 21.3, 26.7, 33.7, 42.4, 48.3 Sch 10, Sch 40 300 300 300 - - 21/2 X /2, 3/4, 1, 11/4, 11/2,2 73.0 x 21.3, 26.7, 33.7, 42.4, 48.3, 60.3 Sch 10, Sch 40 300 300 300 - - 3,4 x '/2,/4,1 88.9, 114.3 x 21.3, 26.7, 33.7 Sch 10, Sch 40 300 300 300 - - 4 x 2'h, 4 x 3 114.3 x 73.0,4 x 88.9 Sch. 10, Sch 40 300 300 300 - - 5 x 2,5 x 21/2 141.3 x 60.3,141.3 x 73.0 Sch 10, Sch 40 300 300 300 - - 6 X 11/2,2,21/2,3,4 168.3 x 48.3, 60.3,73.0,88.9,114.3 Sch 10, Sch 40 300 300 300 - - 2 x 1/2, 3/4, 1, 11/4, 11/2 60.3 x 21.3, 26.7,33.7,42.4,48.3 BLI, DI, EZT, FF, GL, MF 300 300 300 - - 2 x 1/2,3/4,1,11/4,11/2 60.3 x 21.3, 26.7,33.7,42.4,48.3 MI, MLT, STF, TL, WLS 300 300 300 - - 2 x '/2, 3/4, 1, 1 '/4, 1 V2 60.3 x 21.3, 26.7, 33.7, 42.4, 48.3 Gal 7, Gal Flo 300 300 300 2 x 1/2, 3/4, 1 60.3 x 21.3, 26.7, 33.7 OF 300 300 300 - - 21h, 3,4 x /2, 3/4, 1 73.0, 88.9, 114.3 x 21.3, 26.7, 33.7 OF, FF, MF, STF 300 300 300 - - 2 x 11/4, 11/2 60.3 x 42.4, 48.3 OF 300 300 300 - - 3,4x2 88.9,114.3 x 60.3 OF, FF, MF,STF 300 300 300 - - 4 x 2'h 114.3 x 73.0 OF, FF, MF, STF 300 300 300 - - 40 114.3x88.9 FF, MF,STF 300 300 300 - - 76.1 x21.3, 26.7, 33.7 BS1387, ISO 4200 300 - 300 16 20 139.7 x 48.3,88.9 851387, ISO 4200 300 - 300 16 20 165.1 x42.4 B51387, ISO 4200 300 300 16 20 60.3.x 21.3, 26.7, 33.7, 42.4, 48.3 BS1387, ISO 4200 - - - 16 20 76.1 x 42.4, 48.3, 60.3 BS1387, ISO 4200 - - - 16 20 88.9 x 21.3, 26.7,33.7,42.4,48.3,60.3 BS1387, ISO 4200 - - - 16 20 114.3 x 21.3, 26.7, 33.7, 42.4 BS1 387, ISO 4200 - - - 16 20. 114.3 x 48.3, 76.1, 88.9 BS1 387, ISO 4200 - - - 16 20 165.1 x48.3,60.3,76.1,88.9,114.3 BS1387, ISO 4200 - - - - 20 139.7 x 60.3, 76.1 BS1 387, ISO 4200 - - - 16 - 168.3 x 48.3, 60.3,73.0 ISO 4200 - - 16 20 168.3, 219.1 x 76.1, 88.9, 114.3 ISO 4200 - - - 16 20 O Figure 730 Grooved** 2x 11/2 60.3x48.3 Sch 5 175 175 175 - - 2,21/2,3,4,5,6X1V2 60.3,73.0,88.9,114.3,141.3,168.3x48.3 Sch lo, Sch 40 300 300 300 - - 3,4,5 x 2,21h 88.9,114.3,141.3 x 60.3,73.0 Sch 10, Sch 40 300 300 300 - - 4x3,5x3 114.3x88.9, 141.3x88.9 Sch 10, Sch 40 300 300 300 - - - 6 x 21/2,3,4 168.3 x 48.3,73.0,88.9, 114.3 Sch 10, Sch 40 250 250 250 -- - 8 x 21/2,3,4 219.1 x 73.0, 88.9,114.3 Sch 10, Sch 40 300 300 300 - - 2,21/2,3,4 x 11/2 60.3,73.0,88.9, 114.3 x 48.3 OF 300 300 300 - - 3,4 x 2 88.9,114.3 x 60.3 OF 300 300 300 - - 2 x 1 V2 60.3 x 48.3 BLT, IL 300 300 300 - - 3 x 11/2 88.9 x 48.3 EZ 300 300 300 - - 139.7 x48.3, 88.9 B51387, ISO 4200 300 - 300 16 20 165.1 x 42.4,48.3,60.3,76.1 B51387, ISO 4200 300 - 300 16 20 60.3 x 42.4, 48.3 B51387, ISO 4200 - - - 16 20 76.1 x 42.4, 48.3, 60.3 BS1387, ISO 4200 - - - 16 20 88.9 x 42.4, 48.3, 60.3 BS1387, ISO 4200 - -- - 16 20 114.3 x42.4, 48.3, 60.3, 76.1, 88.9 BS1 387, ISO 4200 - - - 16 20 165.1 x 48.3, 60.3, 76.1, 88.9,114.3 BS1387, ISO 4200 - - - - 20 139.7 x 60.3, 76.1 B51387, ISO 4200 - - 16 - 168.3 x 48.3, 60.3, 73.0 - ISO 4200 - - - 16 20 168.3, 219.1 x 76.1, 88.9,114.3 IS04200 - - - 16 * Figure 730 Threaded Mechanical Outlets are UL and ULC Listed and FM Approved in both the Tee and Cross configuration with NPT and ISO threaded outlets as specified in the chart. ** Figure 730 Grooved Mechanical Outlets are UL and ULC Listed and FM Approved in both the Tee and Cross configuration. 4: Figure 730 Threaded and Grooved Mechanical Outlets are VdS Approved in the Tee configuration only. Grinnell® products are UL and ULC Listed and FM, LPCB and VdS Approved, as specified in the charts, for the pressure ratings shown for use in Fire Protection Systems (automatic sprinkler, open sprinkler and standpipe) and connections to such systems. The charts were developed from the latest Listings and Approval data available at the time of publication. Listings are subject to changes and additions by the approval bodies. For Dry Pipe systems or Freezer Systems, use Tn-Seal Gaskets and petroleum free silicone lubricant. Follow installation instructions provided in the Installation Handbook lH-1000. TFPI800 Page 5 of 8 Figure Nominal Size Inches Nominal Size mm Pipe Schedule Rated Pressure Figure 577 1-1/4,1-1/2,2 42.4,48.3,60.3 FLF,MF, XL, GL, 10,40, CT, DF,TL, 300 300 300 - 2-1/2,3,4 73.0,88.9,114.3 FLF,MF,DF 300 300 300 2-1/2,3 73.0,88.9 FF,XL 300 300 1 300 - - 1-114,1-1/2,2, 2-1/2,3,4,6,8 42.4,48.3,60.3,73.0,88.9,. 114.3, 168.3,219.1 10 300 300 300 1-1/4,1-1/2,2, 2-1/2,3,4,6 42.4, 48.3, 60.3, 73.0, 88.9, 114.3, 168.3 40 300 300 300 1,1-1/4,1-1/2,2 33.7,42.4,48.3,60.3 5 175 175 175 - - 3,4,6 88.9,114.3,168.3 EZF 300 300 300 - - 11/4 42.4 Err 300 300 300 - - 1-1/2,2 48.3, 60.3 EZ1 FF 300 300 300 - - 11/2221/234 4836037308891143 STF 300 300 300 - - 4 114.3 STF 250 250 250 - 8 219.1 0.188 in. wall 300 300 300 - 1 33.7 ____________________________ 10, 40, XL, IL, OF, BLT, DL, DI, MI, WLS, WST, GI, MLI, EZ1 El EL, 5, BS1387M, ISO 4200 300 300 300 __________________ 5 141.3 10 300 1 300 1 300 5 141.3 40 300 300 300 - - 76.1mm,165mm BS1387M, ISO 4200 300 300 139.7mm ISO 4200 300 300 1,1-1/4,1-1/2,2,3,4 33.7,42.4,48.3,60.3,88.9,114.3 BS1 387M, ISO 4200 - - 20 bar 76.1,165.1 BS1387M, ISO 4200 20 bar 6,8 168.3,219.1 ISO 4200 - - 20 bar 1,1-1/4,1-1/2,2,3, 4,6,8 33.7,42.4,48.3, 60.3,88.9,114.3, 168.3,219.1 ISO 4200 16 bar 76.1, 139.7 ISO 4200 • 16 bar Pipe Schedule Key STF - Steady Flow Listed/Approved steel sprinkler pipe manu- factured by AMS Tube Corp. BLT - Black Light Wall Threadable Listed/Approved steel sprin- kler pipe manufactured by Allied Tube and Conduit. DF - Dyna-Flow Listed/Approved steel sprinkler pipe manufac- tured by Allied Tube and Conduit. DT - Dyna-Thread Listed/Approved steel sprinkler pipe manu- factured by Allied Tube and Conduit. SF - Super-Flow Listed/Approved steel sprinkler pipe manu- factured by Allied Tube and Conduit. XL - Extra Light Weight Listed/Approved steel sprinkler pipe manufactured by Allied Tube and Conduit. UE - Ultra-Eddy Listed/Approved steel sprinkler pipe manufac- tured by Bull Moose Tube Company. TL - TL Listed/Approved steel sprinkler pipe manufactured by Central Grooved Piping Products. LS - Listed/Approved steel sprinkler pipe manufactured by Century Tube Corporation. ID - IDOD Listed/Approved steel sprinkler pipe manufactured by IDOD Systems. GAL-FLO - Listed/Approved steel sprinkler pipe manufactured by IDOD Systems. GAL-7 - Listed/Approved steel sprinkler pipe manufactured by IDOD Systems. EZ - EZ-Flow Listed/Approved steel sprinkler pipe manufac- tured by Northwest Pipe and Casting Company. FLF - Fire Line Flow Listed/Approved steel sprinkler pipe man- ufactured by Western International Forest Products. MF - Mega Flow Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. MLT - Mega Light Listed/Approved steel sprinkler pipe manu- factured by Wheatland Tube Company. MT - Mega Thread Listed/Approved steel sprinkler pipe manu- factured byWheatland Tube Company. SL - Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. WLS - WLS Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. WST - WST Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. GL - GL Listed/Approved steel sprinkler pipe manufactured by Wheatland Tube Company. EZT - EZ Thread Listed/Approved steel sprinkler pipe manu- factured by Youngstown Tube Company. FF - Fire-Flo Listed/Approved steel sprinkler pipe manufac- tured by Youngstown Tube Company. 5 - Schedule 5 steel sprinkler pipe 10 - Schedule 10 steel sprinkler pipe 20 - Schedule 20 steel sprinkler pipe 30 - Schedule 30 steel sprinkler pipe 40 - Schedule 40 steel sprinkler pipe BS1387m - British Standard Medium Listed/Approved steel sprinkler tube. 1S04200 - ISO Standard Listed/Approved steel sprinkler tube. JIS G3452 - Japanese International Standard Note: Cut and roll grooved references are for pipe runs and also grooved outlets. Page 6 of 8 Figure ADACAPO Figure 201 45° Elbow Figure 210 90° Elbow (j Figure 219 F Tee Figure 260 End Cap IC LW Figure 250 Concentric Reducer * TFPI800 Figure Nominal Size Inches Nominal Size mm Rated Pressure (psi-UL,ULC,FM; Bar LPCB and VdS) C3j ij ADACAP 11/2 X V2, 3/4, 1 42.4 x 21.3, 26.7, 33.7 300 300 300 - - 2 x 1/2, 3/4, 1 48.3 x 21.3, 26.7, 33.7 300 300 300 - - 2/2 X 1/2, 3/4, 1 60.3 x 21.3, 26.7, 33.7 300 300 300 - - Figure 201 1 33.7 500 500 500 - - 11/4,11/2,2,3,4 42.4,48.3,60.3,88.9,114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0,141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 139.7 500 - 500 16 -. 108.0, 133.0, 159.0, 216.3 300 - 300 - - Figure 210 1 33.7 500 500 500 - - 11/4, 11/2, 2, 3,4 42.4, 48.3,60.3, 88.9, 114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0, 141.3 500 500 500 - - 76.1 500 -. 500 16 20 165.1 • 500 - 500 - 20 139.7 500 - 500 16 - 108.0,133.0,159.09 216.3 300 300 - - Figure 2'19 1 33.7 500 500 500 - - 11/4, 11 /2,2,3,4 42.4,48.3, 60.3, 88.9,114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 450 450 450 16 20 12 323.9 • 450 450 400 16 20 21/2,5 73.0, 141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 139.7 500 - 500 16 - 108.0,133.0,159.0,216.3 300 - 300 - - Figure 260 1/4, 11 /2,2,3,4 42.4, 48.3, 60.3, 88.9, 114.3 500 500 500 16 20 6,8 168.3, 219.1 500 500 500 16 20 10 273.0 • 450 450 450 16 20 12 323.9 450 450 400 16 20 21/2,5 73.0, 141.3 500 500 500 - - 76.1 500 - 500 16 20 165.1 500 - 500 - 20 139.7 500 - 500 16 j - Figure 250 11/2, xl, 2 x 48.3 x 33.7, 60.3 x 33.7 500 500 500 16 - 2 x11/4, 2 xl 1/2 60.3 x 42.4, 60.3 x 48.3 500 500 500 16 20 21/2 x 2,3 x 2'/2, 4 X 21/ 73.0 x 60.3, 88.9 x 73.0, 114.3 x 73.0 500 500 500 16 20 4 x 2,6 x 2 114.3 x 60.3, 168.3 x 60.3 500 500 500 16 - 3 x 2,4 x 3,6 x 4 88.9x60.3, 114.3 x 88.9,168.3 x 114.3 500 500 500 16 20 5 X 4,6 X 5 141.3 xl 14.3, 168.3 X 141.3 500 500 500 76.1 x 48.3, 76.1 x 60.3 500 500 500 16 20 88.9 x 76.1, 114.3 x 76.1 500 500 500 16 20 139.7 x 88.9, 139.7 x 114.3 500 500 500 16 - 165.1 x114.3 500 500 500 - 20 168.3 x 76.1, 168.3 x 139.7 500 500 500 16 - 165.1 x 88.9,165.1 x 139.7 500 - 500 - - * ADACAPs are UL and ULC Listed and FM Approved with NPT and ISO threaded outlets. Page 7 of 8 Figure Nominal Size Inches Nominal Size mm Rated Pressure (psi-UL,IJLC,FM; Bar LPCB and VdS) Figure 501 11/4,11/2,2,3,4 42.4,48.3,60.3,88.9,114.3 300 300 300 16 20 6,8 168.3, 219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 510 11/4,11/2,2,3,4 42.4,48.3,60.3,88.9,114.3 300 300 300 16 20 6,8 168.3,219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 519 11/4,11/7.,2,3,4 42.4,48.3,60.3,88.9,114.3 300 300 300 16 20 6,8 168.3, 219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 2,3,4,6,8 60.3, 88.9,114.3, 168.3,219.1 300 300 300 16 20 21/,,5 73.0,141.3 300 300 300 - - 501S _________ 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure 2,3,4,6,8 60.3,88.9,114.3.168.3,219.1 300 300 300 16 20 21/2,5 73.0,141.3 300 300 300 - - 76.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 . - 20 2, 3,4,6,8 60.3, 88.9,114.3, 168.3, 219.1 300 300 300 16 20 21/2,5 73.0, 141.3 - Figure 300 300 300 - 70.1 300 300 300 16 20 139.7 300 300 300 16 - 165.1 300 300 300 - 20 Figure - 5100E 21/2,3,4,5 73.0, 88.9,114.3, 141.3 300 300 300 6,8 168.3, 219.1 300 300 300 - - TFP 1800 Figure 501 45° Elbow Figure 510 900 Elbow Figure 519 Tee Figure 501S 45° Elbow FFIIiP Figure 510S 90° Elbow - Figure 51 0S Tee Figure 51 Drain Elb TFPI800 Page 8 of 8 Fabricated Fittings Figure Nominal Size Inches Rated Pressure (psi) KI <8> Figure 391 Groove x Male Threaded Adapter Nipples 1,11/41% 300 300 2,21/2 300 300 3,4,5 ____________ 300 300 6,8 300 300 10,12 300 300 Figure 392 Groove x Groove Adapter Nipples 11141½ 300 300 2,2% 300 300 3,4,5 ____________ 300 300 618 300 1 300 10,12 300 300 Figure 393 Groove x Bevel Adapter Nipples 1,1%,1% 300 300 2,2% 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 312 22W Elbow 1V41V2 300 300 2,21/2 300 300 314,5 300 j 300 6,8 300 300 10,12 300 300 Figure 313 11¼° Elbow 11411/2 300 300 2,21/2 300 300 314,5 300 300 6,8 300 300 10,12 300 300 Figure Nominal Size Inches Rated Pressure (psi) Figure 321 Reducing Tee 114,1% 300 300 2,2% 300 300 _________________ 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 327 Cross 1,114,1% 300 300 2,2½ 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 341 Groove Flange Adapter 150 lbs. 1,114,1% 300 300 2,2% 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 Figure 350 Concentric Groove Groove Reducer 114,1% 300 300 2,2% 300 300 3,4,5 300 300 6,8 300 300 10,12 300 300 General Notes: It is the Designer's responsibility to select products suitable for the intended service and to en- sure that pressure ratings and performance data is not exceeded. Always read and understand the installation instructions (I1-1-1000). Never remove any piping component or correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application. TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale Pennsylvania 19446 II :11 l:I:1!1III1I IIIli -f.: Iii Threaded Fittings Tyco Fire Products --- www.tyco-grooved.com EENTRAL 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 --- USA Customer Service/Sales: Tel: (215) 362-0700/ Fax: (215) 362-5385 Grooved Piping Products Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 General Technical Description Data See Fire Protection Submittal Sheet for pressure rating and Listing and Approval information Ductile Iron threaded fittings (with the exception of California Tees and Street Elbows) conform to ANSI B16.3. They are higher in strength and more corrosion resistant than cast iron fittings. The additional strength is provided by the ductile properties making up the fitting. This is accomplished by adding magnesium while the iron is being poured into it final cast shape. This provides an advantage as the fittings are not as susceptible to leaks or cracking and they are also lighter than standard cast iron. Caution: Installers who have not used ductile iron threaded fittings before should be instructed that the fittings are stronger than the pipe and over- tightening the fitting can create leaks and cause damage to pipe threads. In general, there is about one-half turn difference between cast iron and ductile iron fittings. Apply Teflon tape or high quality pipe joint compound on the male pipe threads and tighten two to three turns beyond hand tight. If you are using an automatic make-on machine, please exercise caution in setting your machine to the proper parameters prior to tightening fittings onto the male pipe threads. Figures: 811, 812, 813, 814, 815, 816, 817, 818, 820, 825, 827, 830, 719, California Tees, and Street Elbows Sizes: 1/2" -21/2" Maximum Working Pressure: 800 Series, California Tees, and Street Elbows: 309 psi Figure 719:.250 psi Approvals: UL, and FM Note: See Fire PrOtection Submittal Sheet for exact Listing/Approval information. Manufacture Source: Imported Material: Ductile Iron, conforming to ANSI B16.3 (Note: Figure 719 Plugs are constructed of Cast Iron) Thread: N.P.T. Installation Apply Teflon Tape or high quality pipe joint compound on the male pipe threads and tighten two to three turns beyond hand tight. (See caution in first column) fl Ordering Procedure. Ordering information: When placing an order, indicate the full product name. Please specify the quantity, figure number and size. Availability and Service: Grooved Piping Products, valves, accessories and other products are available throughout the U.S., Canada, and internationally, though anetwork of distribution centers. You may write directly or call 215-362-0700 for the distributor nearest you. 11 Care and Maintenance The owner is responsible for the -inspection, testing, and maintenance of their fire protection system and devices in accordance with the applicable standards of the National Fire Protection Association (e.g., NFPA 25), in addition to the standards of any authority having jurisdiction. The installing contractor or product manufacturer should be contacted relative to any questions. Any impairment must be immediately corrected. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service. No. 21-3.0 FB-] 41 Figure 812 - I 900 Reducing Elbow C -- L Size Inches A Inches B Inches C Inches D Inches Part Number Weight Lbs. Box Qty. 3/4 x 1/2 1/16 13 /16 5/ 5/ 86342 0.33 160 1 x 1/2 11/4 1/ /16 13/15 86210 0.44 110 1 x 3/4 is/a 1/is 1V16 /8 86211 0.53 90 11/4 x 1/2 1/16 11/2 5/ 15/15 86212 0.64 75 11/4 X 3/4 1/16 1/8 3/4 11/16 86213 0.75 60 11/4 X 1 1/16 ia/is 7/ 1 86214 0.77 55 11/2 X 3/4 11/2 1/4 3/4 i/16 86221 0.95 45 1V2x1 1/8 113/16 7/ 11/8 86215 0.99 40 11/2 X11/4 113/16 1/8 11/8 13 /is 86216 1.14 35 2X 3/4 1/8 118/16 7/ 1/8 86217 1.39 30 2x I 1/4 21/16 2 is/is 86218 1.58 25 2x 11/2 2 2/16 11/4 1/16 86220 1.67 20 21/2 x 2 1 2/s 2/s 11/4 1 1/8 86262 1 3.01 15 Size Inches A Inches B Inches Part Number Weight Lbs. Box Qty. 1/2 7/ 3/ 86780 0.22 250 3/4 1 7/16 86781 0.33 150 1 11/8 13/16 86280 0.48 90 11/4 1 V1 5/ 86281 0.73 50 11/2 1/is 11/16 86282 0.93 35 2 11V16 15/16 86283 1.55 18 21/2 1/16 1 86782 2.70 12 Figure 813 450 Elbow Size Inches A Inches B Inches Part Number Weight Lbs. Box Qty. 1/2 11/8 '/is 86340 0.33 150 3/4 15/16 3/4 86341 0.50 90 1 11/2 13/16 86230 0.85 60 1V4 1/4 11/16 86231 1.30 35 11/2 115/16 1/16 86232 1.63 24 2 21/4 11/2 86233 2.63 12 21/2 211/16 1/is 86234 4.55 8 Figure 814 Tee LE Figure 811 900 Elbow B Size Inches A Inches B Inches Part Number Weight Lbs. Box Qty. 1/2 11/8 /16 86206 0.24 240 3/4 1/16 3/4 86205 0.40 120 1 11/2 13/15 86200 0.64 70 11/4 1/4 11/16 86201 0.95 40 11/2 115/16 1/16 86202 1.24 30 2 21/4 11/2 86203 1.74 20 21/2 211/16 1/16 86204 3.28 1 10 Figure 815 Reducing Tee Size Inches A Inches B Inches C Inches D Inches E Inches F Inches Part Number Wt. Lbs. Box Qty. 3/4 x3/4x1/2 1/16 1/1e 11/4 /8 /8 11/16 86235 0.46 95 3/4 x 3/4 X 1 17/16 17/ .16 13/8 7/ 7/ 11/IS 86755 0.68 65 1x1/2 X1 11/2 1/8 1V2 13/16 13/18 13/16 86236 0.70 55 I X 3/4 X1/2 11/4 I/16 1/8 /16 5/ 13/is 86756 0.63 80 1 x 3/sx3/.s 1/8 1 V1 i'/is 11/16 3/4 7/ 86757 0.68 65 I x 3/4 x 1 11/2 17/16 .11/2 13/16 7/ 13/16 86237 0.77 55 I x 1 x 1/ 11/4 11/4 13/8 5/16 /16 13/is 86238 0.66 65 1x1x3/4 1/8 1/8 1/16 1 Vs 11/16 7/ 86239 0.73 60 I xi x 11/4 111/16 111/16 1/I6 1 1 /8 86240 0.97 45 1x1x11/2 113/16 113/16 is/s il/a 1 V 7/ 86241 1.14 35 11/4X1XV2 115/16 1V4 1 V1 5/ 9/16 1 86242 0.81 50 11/4 x1x3/4 1/16 1/8 1/8 3/4 11/16 11/16 86243 0.90 50 11/4 x1 X '1 '/16 11/2 . 111/16 7/ 13/16 1 86244 1.03 45 1V4X1X11/4 1/4 111/16 1/4 11/16 1 11/16 86245 1 1.101 40 11/4x1x11/2 1/ 113/15 113/16 1/16 11/8 11/16 86246 1 1.431 30 11/4X11/4 x1/2 1/8 is/a 1/16 li/is 11/16 1 86247 1 0.871 45 11/4x11/4 x3/4 1/16 1/16 1/8 3/4 3/4 11/16 86248 0.96 45 11/4x11/4X1 1/16 1/16 111/16 /8 7/ 1 86249 1.10 40 11/4x 11/4x 11/2 17/8 1/8 113/18 113/16 113/16 11/16 86250 1.50 30 11/4 x 11/4x2 21/8 21/8 2 17/16 11/s 86251 2.00 24 11/2 x 1 X 1/2 17/16 1 V16 11i/16 11/16 5/ 1V8 86252 0.97 40 11/2X1 x3/4 11/2 1/8 1/4 3/4 11/16 13 /16 862531 1.141 40 11/2 x1x1 1/ 11/2 113/16 /8 13/15 11/8 86254 1.141 30 11/2 x1x11/2 115/16 113/16 115/16 1/16 11/8 86255 1.521 30 11/2X11/4XV2 1/16 15/ 16 111/16 li/is 5/ 11/8 86257 1.03 40 11/2x11/4x3/4 11/2 1/16 1/4 3/4 3/4 13/16 86258 1.10 40 11/2x11/4x1 1/s 1 V1 113/16 7/ 7/ 11/8 86259 1.31 30 11/2 x 1V4X2 2/is 21/8 2 17/16 17/16 11/4 86260 1.94 20 11/2x11/2x1/2 1/16 17 /16 111/16 11/16 11/16 11/8 86261 1.14 35 11/2x1V2x3/4 11/2 11/2 1/4 3/4 3/4 1/16 86262 1.23 35 11/2x11/2X1 1s/8 15/s 113/16 7/ 7/ 11/8 86263 1.38 30 11/2x11/2X11/4 113/16 113/16 1/8 1 Y1 11/16 86264 1.50 30 11/2x11/2x2 j 2/16 2/s 2 1/16 1/is 11/4 86265 2.00 20 2x1x2 21/4 2 21/4 11/2 1/16 11/2 86266 2.18 15 2x11/4x2 21/4 21/8 21/4 11/2 17/16 11/2 86267 2.31 15 2x11/2x1/2 11/2 1/16 It/a 3/4 11/16 1/16 86268 1.50 30 2x1V2x3/4 15/8 11/2 115/16 7/ 3/4 1/8 86269 1.61 25 2 xi 1/2 xl 1/4 15 /8 2 1 7/ 15 /16 86270 1.65 20 2X1V2X11/2 2V16 115/16 2/16 1 V1 1/16 17/ 16 86272 2.03 20 2x11/2x2 21/4 2/is 21/4 11/2 86273 2.37 15 2x2x1/2 11/2 li/2 it/a 3/4 1/16 86222 1.50 30 2x2x3/4 is/a is/a h1a/is 7/ 11/2 V7/8 1/a 86223 1.67 20 2x2xI 1/4 l/4 2 11/is 86224 1.91 20 2x2x11/4 1/s 1/a 21/s hI/a 17/16 86225 2.05 20 2 x 2 x 11/2 2 2 2/16 11/4 11/4 11/2 86226 2.11 15 2x2x21/2 2/s 2/a 2/8 1/4 17/8 1 1/ia 86227 13.671 10 2V2x2x3/4 1 /4 I s/s 2/16 5/ 7/ l/4 86274 2.22 15 -2- Size Inches A Inches B Inches Part Number Weight Lbs. Box Qty. 3/4 X 1/2 1/4 ¶1/16 86772 0.38 240 1 X 1/2 111/16 1/2 86228 0.38 200 1 X 3/4 1/4 1/2 1 86229 0.53 110 Figure 825 Extension Piece Size Inches A Inches Part Number Weight Lbs. Box Qty. 1/2 X 11/2 11/2 72751 0.20 300 '/2 x2 2 72980 0.27 250 3/4 X 11/2 11/2 72981 0.22 250 3/4 x2 2 1 72982 1 0.31 12001 Figure 816 Reducing Coupling Size Inches A Inches Part Number Weight Lbs. Box Qty. 1/2 /8 72776 0.15 500 3/4 1 72777 0.22 300 1 1/l6 72824 0.33 180 11/4 1/16 72756 0.54 110 11/2 1/8 72822 0.68 80 2 11/2 72823 0.96 45 21/2 .1/4 72825 1.80 25 Size Inches A Inches Part Number Weight Lbs. Box Qty. 1/2 15/16 86292 0.10 500 3/4 11/8 86293 0.18 300 1 11/4 86294 0.28 200 11/4 1/a 86295 0.50 110 11/2 1/1 6 86296 0.70 80 2 11/2 86297 0.90 45 Figure 719 Cast Iron Plug LIi Figure 820 Cap Figure 817 Cross Figure 827 Hex Bushing Size Inches A Inches B Inches C Inches D Inches Part Number Weight Lbs. Box Qty. 1 11/2 11/2 13/16 13/16 86284 0.97 45 11/4 1/4 1/4 11/16 . 11/16 86285 1.59 25 11/2 115/16 115/16 1/16 1/16 86286 1.89 20 2 21/4 21/4 11/2 11/2 86287 2.93 10 11/4X11/4X1X1 111/16 1/16 1 /8 86289 125 30 11/2X11/2X1X1 113/16 1/a 11/16 1'/l6 86322 1.48 24 2 x 2 x I x 1 1 2 1/4 11/4 11/16 86291 2.64 10 Size Inches A Inches Part Number Weight Lbs. Box Qty. I x 11/16 72726 0.22 280 1 x 3/4 11/16 72762 0.18 280 11/4 X 1 1/l6 72763 0.31 150 11/2 X1 11/ 72757 0.53 100 11/2X11/4 11/4 72764 0.35 100 2 x 1 1/a 72759 0.75 80 2x 11/4 1/a 72761 0.69 80 2x1 '/2 13 A 72775 0.62 1 80 Figure 818 Straight Coupling Size Inches A Inches B Inches Part Number Wrench Weight Lbs. Box Qty. 1/2 1/8 /16 72779 11/8 0.18 360 3/4 1/8 /1 72778 1/8 0.26 200 1 1/4 72755 111/16 0.44 110 11k .2 /6 72754 2 0.54 75 11/2 2/16 3/4 72753 21/4 0.71 60 2 2/8 11/8 72752 2I4 1.15 30 21/2 3 3 A 72758 3/8 2.29 18 I [141_i U Figure 830 I I I 1 A Brass Seat Union Size Inches A Inches B Inches Part Number Weight Lbs. BoxI Qty. 1/2 17 A 13/16 86207 0.47 110 3/4 2 15/16 86275 0.66 80 1 2/16 13/16 86276 1.08 50 1V4 21/2 11/16 86277 1.54 35 11/2 2/8 1/16 86278 2.03 25 2 31/a 1/ 86279 3.15 18 -3- Street Elbows a A a - - 4 . - b at Size Inches A Inches B Inches C Inches Part Number Weight lbs. Box Qty. I x Y2 11/2 3/4 3 42003 0.70 80 1 x 1 11/2 3/4 3 42002 0.90 60 A California Tees Fti L Size Inches A Inches B Inches C Inches D Inches Part Numberlbs. eight Box Oty. I x X 1 11/2 Is 3 3/4 42000.95 [(.95 50 1 x 1 X 1 11/2 3/4 3 3/4 42001 45 Products manufactured by Tyco Fire Products are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by Tyco Fire Products. No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco Fire Products or for products and components which have been subject to misuse, improper installation, corrosion, or • JLimited Warranty which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protection Association (NFPA), and/or the standards of any other Authorities Having Jurisdiction, Materials found by Tyco Fire Products to be defective shall be either repaired or replaced, at Tyco Fire Products' sole option. Tyco Fire Products neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco Fire Products shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer's representatives. IN NO EVENT SHALL TYCO FIRE PRODUCTS BE LIABLE, IN CONTRACT, TORT, STRICT LIABILITY OR UNDER ANY OTHER LEGAL THEORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR CHARGES, REGARDLESS OF WHETHER TYCO FIRE PRODUCTS WAS• INFORMED ABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT SHALL TYCO FIRE PRODUCTS' LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE. THE FOREGOING WARRANTY IS MADE IN LIEU OFANYAND ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. General Notes: It is the Designer's responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Never remove any piping component nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application. tljCO/F/ow Control/ Tyco Fire Printed U.S.A. 10-01 Products "THE INCH" _ QUICK RESPONSE annis '-U NNE=AUTOMATIC SPRINKLER MODEL GL5606 FIRE SPRINKLER CORPORATION ONE INCH ADJUSTABLE FLAT PLATE CONCEALED PENDENT DESCRIPTION AND OPERATION The Globe Quick Response GL5606 Adjustable Concealed Pendent Sprinkler has a low profile, aesthetically pleasing design. It provides sprinkler operations approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards. This sprinkler offers the additional feature of greatly in- creased safety to life and should be used advisedly and under the direction of approving authorities having jurisdiction. The sprinkler is available with a nominal 1" of adjustment and a low profile cover plate assembly. All that is seen at the ceiling is a 3 5/16" diameter ceiling plate or an optional 2 3/4" diameter ceiling plate color finished to match the specifier's. exact requirements. The GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the ...'!smooth flow" of the ceiling. Globe's GL5606 Concealed Sprinkler utilizes a 3mm frangible glass ampule which is located above the ceiling and concealed from view by the ceiling plate. The provided protective cap needs to be removed in order to install the sprinkler with the proper wrench The protective cap must be replaced on the sprinkler until the time the cover plate is to be installed. The "push on - screw off' designed cover plate is easily installed and with a nominal 1" of adjustment makes it easier to get a proper fit at the ceiling. Operation of the sprinkler occurs when heat build up causes the solder holding the cover plate to the support shell to melt allowing the cover plate to fall clear. Continued heat build up causes the 3mm glass bulb to burst allowing the deflector to drop down and distribute water in an approved pattern to extinguish or control the fire: . . TECHNICAL DATA 'See reverse side for Approvals and Specifications. 'Temperature Ratings - 135°F (57°C) Sprinkler, 135°F (57°C) Cover Plate 155°F (68°C) Sprinkler, 135°F (57°C) Cover Plate 155°F (68°C) Sprinkler, 155°F (68°C) Cover Plate 175°F (79°C) Sprinkler, 155°F (68°C) Cover Plate 200°F (93°C) Sprinkler, 155°F (68°C) Cover Plate 'Water Working Pressure Rating - 175 psi (12 Bars) -Factory.. tested hydrostatically to 500 psi (34 Bars) -Maximum low temperature glass bulb rating is -67°F (-55°C) 'Frame - bronze • Deflector - brass Screw - brass 'Lodgement Wire - stainless steel 'Bulb seat - copper 'Spring - nickel alloy • Seal - teflon• Drop Pin - stainless steel 'Bulb - glass with alcohol based solution, 3mm size 'Cover Plate - brass 'Upper Escutcheon Assembly - steel 3 5/16" diameter plate - 2 3/4" diameter plate QUICK RESPONSE WHITE FLAT PLATE CONCEALED PENDENT NOTE: Globe's wrench PIN 332765 must be used to install this sprinkler. 'SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING NOV 2016 GFS-1 50a (Formerly A-38) "THE INCH" QUICK RESPONSE A UTOMA TIC SPRINKLER MODEL GL5606 ONE INCH ADJUSTABLE FLAT PLATE CONCEALED PENDENT SPECIFICATIONS NOMINAL THREAD SIZE LENGTH I FLAT COVER "K" FACTOR I PLATE FINISHES I I Chrome 5.6 1/2"NPT 2 1/2" White Painted (80 metric) (15mm) (6.4cm) Other Finishes12 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 1FINISHES AVAILABLE ON SPECIAL ORDER. 2FOR-PLATES OTHER THAN WHITE, CONTACT GLOBE FOR ORDERING SPECIFICATIONS. APPROVALS STYLE SIN MODEL HAZARD1 135°F (57°C) Flat Cover Plate 155°F_(68°C)_Flat Cover Plate . - cULus *FM NYC-DOB MEA **135F (57°C) 155°F (68°C) **155F (68°C) 175'F( 79-C) 200°F (93°C) Sprinkler Sprinkler Sprinkler Sprinkler. Sprinkler 101-92-E Adjustable Concealed GL5606 LH/OI-I X X X X X X X X Pendent 'SPRINKLERS SHALL BE LIMITED AS PER THE REQUIREMENTS OF NFPA13 AND ANY OTHER RELATED DOCUMENTS. *FM APPROVED AS STANDARD RESPONSE *NO FM APPROVALS SECTIONS ROSS OH: ORDINARY HAZARD LH: LIGHT HAZARD F— 2 1/4" 016. MIN. —H HOLE IN CEILING 21/4" DIA. MIN. HOLE IN CEILING r~__ —17/8" DIA.—H 17/8" DIA.—H 1"x1/2"-...I lxl/2" REDUCER LN ) REDUCER 1 7/8' MIS. 2 3/4" MAX. - DEFLECTOR SUPPORT SHELL piq~DROP PIN SHELL 23/4" DIA. '"' 1/8i " '. 35/16' DIA. -FLAT COVER PLATE s-FLAT COVER PLATE 1" ADJUSTMENT FLAT PLATE CONCEALED PENDENT FLAT COVER PLATE SIZES WHITE 135°F (57°C) PART# WHITE 155°F (68°C) PART# CHROME 135°F (57°C) PART# CHROME 155°F (68°C) PART# 2 3/4" DIA. 332726 332731 332724 332729 3 5/16" DIA. 332706 332711 332704 332709 2 3/4" MAX. 17/8' MIS. DROP PIN ORDERING INFORMATION SPECIFY -Quantity . Model Number . Style . Orifice 'Thread Size 'Temperature Finishes desired 'Quantity - Wrenches - PIN 332765 'Quantity - Protective Caps - P/N 332695 GLDHE FIRE SPRINKLER CORPORATION NOV 2016 GLOBE® PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 FAX 989-846-9231 1-800-248-0278 www.globesprinkler.com PRINTED U.S.A. GFS-1 50a (Formerly A-38) tqccs Worldwide i Fire Protection Contacts i www.tyco-fire.com Products Model ESFR-25 252 K-factor Pendent Sprinkler Early Suppression, Fast Response General Description TYCO Model ESFR-25 Pendent Sprin- klers are Early Suppression, Fast Response (ESFR) sprinklers having a nominal K-factor of 25.2 (Ref. Figure 1). They are suppression-mode sprinklers that are especially advantageous as a means of eliminating the use of in-rack sprinklers when protecting high-piled storage. The Model ESFR-25 Sprinklers are pri- marily used for ceiling-only sprinkler protection of (but not limited to) the fol- lowing storage applications: most encapsulated or non-encap- sulated common materials including cartoned, unexpanded plastics uncartoned (exposed) expanded plastics in accordance with NFPA 13 and FM Global standards some storage arrangements of rub- ber tires, roll paper, flammable liq- uids, aerosols, and automotive components For more specific criteria, refer to Table A as well as the applicable design standard. The Model ESFR-25 Pendent Sprin- klers provide the system designer with hydraulic and sprinkler place- ment options not presently available to the traditional ESFR sprinklers having nominal K-factors of 14.0 and 16.8. In particular, the Model ESFR-25 Sprin- kler has been designed to operate at substantially lower-end head pres- sures, as compared to ESFR Sprinklers IMPORTANT Always refer to Technical Data Sheet TFP700 for the "INSTALLER WARNING" that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and installation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. Page 1 of 4 having nominal K-factors of 14.0 and 16.8. This feature offers flexibility when sizing system piping, as well as possi- bly reducing or eliminating the need for a system fire pump. Also, Model ESFR-25 Sprinklers permit use of a maximum deflector-to-ceiling distance of 18 inches (460 mm) versus 14 inches (356 mm). Additionally, a storage arrangement of 40 ft. (12,2 m) with a ceiling height of 45 ft. (13,7 m) does not require in-rack sprinklers as do other ESFR Sprinklers having nominal K-factors of 14.0 and 16.8. The Model ESFR-25 Sprinklers are listed by Underwriters Laboratories (UL) for specific applications with a maximum storage height of 43 ft. (13,1 m) with a maximum ceiling height of 48 ft. (14,6 m) without the requirement for in-rack sprinklers. Refer to the Specific Application Listing (UL) for the design criteria. Applications for the TYCO ESFR Sprin- klers are expanding beyond currently recognized installation standards. For information on research fire tests (e.g., with flammable liquids and aerosols) that may be acceptable to an author- ity having jurisdiction, contact Tyco Fire Protection Products (TFPP) Technical Services. The Model ESFR-25 Sprinklers described herein must be installed and maintained in compliance with this document, as well as with the applica- ble standards of the National Fire Pro- tection Association (NFPA), in addition to the standards of any authorities having jurisdiction (e.g., FM Global). Failure to do so may impair the perfor- mance of these devices. The owner is responsible for main- taining their fire protection system and devices in proper operating con- dition. Contact the installing contrac- tor or product manufacturer with any questions. In all cases, the appropriate NFPA or FM Global installation standard, or other applicable standard, must be referenced to ensure applicability and to obtain complete installation guide- JULY 2016 lines. The general guidelines in this data sheet are not intended to provide complete installation criteria. Sprinkler Identification Number (SIN) TY9226 TY9226 is a re-designation for Central SIN 9226, Gem SIN G8441, and Star SIN S8010. Technical Data Approvals UL and C-UL Listed FM Approved VdS Approved NYC Approved under MEA 356-01-E LPCB Certified (Cert. Nos. 094b and 0071) CE Certified (Certificate of Conformity 1725-CPD-H0010) Maximum Working Pressure 175 psi (12,1 bar) Pipe Thread Connections 1 Inch NPT or ISO 7-R 1 Discharge Coefficient K=25.2 gpm/p5i½ (362,9 1pm/bar½) Temperature Ratings 165°F (74°C) and 212°F (100°C) Finish Natural Brass TFP3I2 tFP312 Page 2 of 4 7 Components: B 1 - Frame 2 - Deflector 3 - Compression Screw 4 -Hook 6 5 - Strut 6 - Link Assembly 7 - Button 5 8 - Sealing Assembly 9 - Ejection Spring 3 2 I TEMPERATURE I RATING ------ 2" (50,8 mm) -H FIGURE 1 MODEL ESFR-25 PENDENT SPRINKLER, 25.2K EARLY SUPPRESSION, FAST RESPONSE 3-13/16" (96,8 mm) 1T 9/16 (14,3 mm) NOMINAL MAKE-IN WRENCH FLATS 1"NPT 1-13/16' (46,0 mm) \ THERMAL SENSING ELEMENT Storage Type NFPA FM Global Open Frame (i.e., no solid shelves) Refer to NFPA 13 Refer to FM Global Single, Double, Multiple-Row, or Portable Rack Storage of Chapters 16 and 17 2-0 and 8-9 Class I-IV and Group A or B Plastics Solid Pile or Palletized Storage of Refer to NFPA 13 Refer to FM Global Class I-IV and Group A or B Plastics Chapters 14 and 15 2-0 and 8-9 Idle Pallet Storage Refer to NFPA 13 Refer to FM Global Chapter 12 2-0, 8-9, and 8-24 Rubber Tire Storage Refer to NFPA 13 Refer to FM Global Chapter 18 2-0 and 8-3 Roll Paper Storage Refer to NFPA 13 Refer to FM Global 8-21 (Refer to the Standard) Chapter 19 Flammable/Ignitable Liquid Storage Refer to NFPA 30 Refer to FM Global 7-29 (Refer to the Standard) Aerosol Storage (Refer to the Standard) Refer to NFPA 30B Refer to FM Global 7-31 Automotive Components in Portable Racks Refer to NFPA 13 N/A (Control mode only; refer to the Standard) Chapter 20 N/A - Not Applicable TABLE A MODEL ESFR-25 PENDENT SPRINKLER COMMODITY SELECTION AND DESIGN CRITERIA OVERVIEW TFP3I2 Page 3 of 4 Physical Characteristics Frame .............................Brass Deflector . Bronze Compression Screw ..........Stainless Steel Hook ............................MONEL Strut ............................. MON EL Link Assembly................Solder, Nickel Button .............................Brass Sealing Assembly. Beryllium Nickel w/TEFLON Ejection Spring ..................INCONEL Operation The fusible link assembly is com- prised of two link halves that are joined together by a thin layer of solder. When the rated temperature is reached, the solder melts and the two link halves separate, activating the sprinkler and flowing water. Design Criteria The following general guidelines pro- vided for the TYCO Model ESFR-25 Pendent Sprinklers can be used for a quick reference. The National Fire Protection Associa- tion (NFPA) and FM Global (FM Approv- als) provide installation standards that must be used to properly design an automatic sprinkler system utilizing Early Suppression, Fast Response (ESFR) Sprinklers. The guidelines pro- vided by NFPA and FM Global may differ. Consequently, the appropri- ate standard must be used for a given installation. In all cases, the appropriate NFPA or FM Global installation standard must be referenced to ensure applicabil- ity and to obtain complete installation guidelines. The following general guidelines are not intended to provide complete installa- tion criteria. In addition to this technical data sheet, the following data sheets describe other TYCO ESFR Sprinklers: TFP315 Model ESFR-17 (TY7226) K=16.8 Pendent Sprinkler TFP3I6 Model ESFR-17 (TY7126) K=16.8 Upright Sprinkler TFP317 Model ESFR-17 (TY7223) K=16.8 Pendent Sprinkler TFP3I8 Model ESFR-1 (TY6226) K=14.0 Pendent Sprinkler TFP319 Model ESFR-14 (TY6236) K=14.0 Pendent Sprinkler System Type Wet Pipe Roof Construction Unobstructed or obstructed con- struction (e.g., smooth ceiling, bar joists, beam and girder,and so forth). Where the depths of the solid struc- tural members (e.g., beams and stem) exceed 12 inches (302 mm), install ESFR Sprinklers in each channel formed by the structural members. Ceiling Slope Maximum 2 inch rise for 12 inch run (16.7%) Maximum Coverage Area 100 ft2 (9,3 m2) In some cases, the installation stan- dards permit a greater coverage area. Minimum Coverage Area 64 ft2 (5,8 m2) per NFPA 13 / FM Global 2-0 Maximum Spacing 12 feet (3,7 m) for building heights up to 30 feet (9,1 m) 10 feet (3,1 m) for building heights greater than 30 feet (9,1 m). In some cases, installation standards permit a greater spacing. Minimum Spacing 8 feet (2,4 m) Minimum Clearance to Commodity 36 inches (914 mm) NFPA Deflector-to-Ceiling Distance 6 to 18 inches (152 to 457 mm) FM Global Centerline of Thermal Sensing Element-to-Ceiling Distance Refer to FM Global 2-0 for Storage Sprinklers. Specific Application Listing (UL) TYCO Model ESFR-25 Pendent Sprin- klers are listed by Underwriters Labo- ratories (UL) for Specific Applications with a ceiling height greater than 45 ft. (13,7 m) up to and includ- ing 48 ft. (14,6 m), and a storage arrangement up to and including 43 ft. (13,1 m), the following guide- line are provided for the TYCO Model ESFR-25 Pendent Sprinklers: Sprinkler Position Pendent: Frame arms aligned with pipe Deflectors parallel with ceiling or roof System Type Wet Pipe only Maximum Area of Coverage 100 ft2 (9,3 m2) In some cases, the installation stan- dards permit a greater coverage area. Minimum Area of Coverage 64 ft2 (5,8 m2) according to NFPA 13 Maximum Slope Ceiling 2 inch rise for 12 inch run (16.7%) Maximum Spacing l0 feet (3,1 m) In some cases, the installation stan- dards permit a greater spacing. Minimum Spacing 8 feet (2,4 m) Temperature Rating 165°F (74°C) and 212°F (100°C) Deflector bistance. from Walls Minimum of 4 inches (102 mm) from walls but no more than 1/2 the allow- able distance permitted between sprinklers Deflector to Top of Storage Minimum of 36 inches (914 mm) Deflector-to-Ceiling Distance 6 to 14 inches (152 to 356 mm) Maximum Ceiling Height 48 feet (14,6 m) Maximum Storage Height 43 feet (13,1 m) Storage Arrangement Palletized, solid piled, open frame, single row, or double row Commodity Class l-IV; Cartonéd, unexpanded plastic Sprinkler System Design NFPA 13 for ESFR Sprinklers based upon 45 psi (3,1 bar) design pressure, 169 gpm (640 1pm) with 12 sprinkler remote area Minimum Aisle Width 5 feet (1,5 m) FITTING SIDE TOWARDS SPRINKLER FITTING I WRE REC TFP3I2 Page 4 of 4 FIGURE 2 W-TYPEI - SPRINKLER WRENCH Installation TYCO Model ESFR-25 Early Suppres- sion, Fast Response 25.2K Pendent Sprinklers must be installed in accor- dance with this section. General Instructions Damage to the fusible Link Assem- bly during installation can be avoided by handling the sprinkler by the frame arms only (i.e., do not apply pressure to the fusible Link Assembly), and by using the appropriate sprinkler wrench. Failure to do so can lead to an unstable link assembly and premature activation of the sprinkler. Damaged sprinklers must be replaced. A leak-tight 1 inch NPT sprinkler joint should be obtained by applying a min- imum-to-maximum torque of 20 to 30 Ibs.-ft. (26,8 to 40,2 Nm). Higher levels of torque can distort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Note: Install the Model ESFR-25 Pendent Sprinkler in the pendent posi- tion (Ref Figure 2). Step 1. With pipe thread sealant applied, hand-tighten the sprinkler into the sprinkler fitting. Do not apply pres- sure to the Link Assembly, and handle the Model ESFR-25 Pendent Sprinkler only by the Frame arms. Step 2. Wrench-tighten the Model ESFR-25 Pendent Sprinkler using only the W-Type 1 Sprinkler Wrench (Ref. Figure 2) and by fully engaging (seating) the wrench on the sprinkler wrench flats (Ref. Figure 1). Step 4. After installation, inspect the Link Assembly of each Model ESFR-25 Pendent Sprinkler for damage. In par- ticular, verify that the Link Assembly and Hook are positioned as illustrated in Figure 1, and that the Link Assem- bly is not bent, creased, or forced out of normal position in any way. Replace damaged sprinklers. Care and Maintenance TYCO Model ESFR-25 Early Suppres- sion, Fast Response 25.2K Pendent Sprinklers must be maintained and ser- viced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, permission to shut down the affected fire protection system must be obtained from the proper authorities and notify all personnel who may be affected by this action. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other- wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth Or by brushing it with a soft bristle brush. Care must be exercised to avoid damage to the sprinklers before, during, and after installation. Sprin- klers damaged by dropping, striking, wrench twist/slippage, or the like, must be replaced. Also, replace any sprin- kler that has a cracked bulb or that has lost liquid from its bulb (Ref. Installa- tion section). The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in compliance with this document, as well as with the applicable standards of the National Fire Protection Asso- ciation (e.g., NFPA 25), in addition to the standards of any authorities having jurisdiction. Contact the installing con- tractor or product manufacturer with any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes. Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product name and part number (P/N). Sprinkler Assemblies Specify: Model ESFR-25 Early Sup- pression, Fast Response -25.2K Pendent Sprinklers (TY9226), (specify temperature rating), with Natural Brass finish, P/N (specify): 165°F (74°C) .......... ........ 58-441-1-165 212°F (100°C) .................58-441-1-214 Special Order Sprinkler Assemblies with ISO 7-1 Thread Connection Specify: Model ESFR-25, Early Sup- pression, Fast Response 25.2K Pendent Sprinklers (TY9226) with ISO 7-1 thread connection, (specify temperature rating), with Natural Brass finish, P/N (specify): 165°F (74°C) .................. 58-442-1 -165 212°F (100°C) .................58-442-1-214 Sprinkler Wrench Specify: W-Type 1 Sprinkler Wrench, P/N 56-872-1-025 GLOBAL HEADQUARTERS 11400 Pennbrook Parkway, Lansdale, PA 19446 I Telephone +1-215-362-0700 Copyright © 2016 Tyco Fire Products, LP. All rights reserved. tqco MONEL and INCONEL are trademark of Special Metals Corporation. Fire Protection Products TEFLON is trademark of DuPont Corporation. I 1 I !ki * Iiii fj I tPRINKLER CONNECTIONS .a .. Pr6duc4trnittaIjiF A PART OF A atkore VVERNATIONAL i Limited Warranty SprinkFLEXa warrants that its products will be free from defects in materials and workmanship under normal conditions of use and service for a period of one year from date of sale. Our obligation under this warranty is limited to repairing or Ireplacing any product that is returned to us with transportation charges prepaid within one year after the date of original sale and that our examination shows to our satisfaction to have been defective in materials or workmanship under normal conditions of use and service, The decision as to whether to repair or to replace any product shall be made by us, and any repair shall be made at our facility. Notwithstanding the foregoing, the following are specifically excluded from the coverage of this warranty: (a) the sprinkler head of any SprinkFLEX® product, but SprinkFLEXe hereby asigns to the original purchaser of any such product the right to enforce the warranty, if any, issued by the manufacturer of such sprinkler head; (b) defects resulting from ordinary wear and tear, of any SprinkFLEX Product; products that have been altered in any manner by the buyer or by anyone other than SprinkFLEX®; products that have been subjected to misuse, abusive use, or damage by accident or casualty; products that have been installed or used in a manner contrary to our specifications, instructions or recommendation; products that have been installed or used in a manner that is not in compliance with all applicable requirements of any code, law, regulation or rule of any federal, state or local governmental or industry authority; and products that have not been inspected and maintained in accordance with bur specifications, instructions or recommendations, including, without limitation, our recommendations as to following the inspection and maintenance standards published by the National Fire Protection Association (NFPA); and products that have been affected by Microbiologically Influenced Corrosion (MIC). i This warranty is not assignable and shall benefit only the original purchaser of a SprinkFLEXC product. If any provision hereof or any portion of any provision shall he held invalid, the remainder of this Limited Warranty shall not be affected thereby, and all provisions of this Limited Warranty shall remain valid and in full force and effect to the fullest extent permitted by law. THIS WARRANTY IS IN LIEU OF ALL IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. NOTWITHSTANDING ANY PROVISION TO THE CONTRARY HEREIN OR ANY APPLICABLE LAW TO THE CONTRARY, IN NO EVENT SHALL SFRINKFLEX BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES WHATSOEVER, WHETHER ARISING FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE ARISING FROM OR IN CONNECTION WITH THE USE OR OPERATION OF, OR ANY DEFECT IN, ANY SPRINKFLEX® PRODUCT, OR OTHERWISE. The risk of damages from any breach of warranty with respect to injury to any person will be born by the purchaser of SprinkFLEX. Series SFN Unbraided Flexible Hose Assemblies CUS Series SFB Braided Flexible Hose Assemblies <@> c®us APPROVED USTED SprinkFLEX® Stainless Steel Sprinkler Fittings connect the branch line to the sprinkler using a flexible stainless steel hose and reducer. The flexible stainless steel hose and fittings are intended for direct connection to the sprinkler and are particularly suited for use in suspended and hard ceiling applications. Each drop assembly comes with one stainless steel flexible hose, one branch line connection nipple, one sprinkler reducing nipple and bracket system. SYSTEM OPTIONS Pre-assembled, ready to install, unbraided and braided flexible stainless steel hose lengths: 28" (700mm), 40" (1000mm), 48" (1200mm), 59" (1500mm), 71" (1800mm) '/2"and 3/4 outlet fittings for connecting sprinkler Pre-assembled, ready to install mounting bracket available in 24" and 48" long Mounting bracket allows the sprinkler to be located anywhere within the ceiling with reference marks in the center for ease of installation without the need for measuring. Optional factory installed sprinkler head. TECHNICAL DATA Maximum Working Pressure: 200 psi (1375 kPa) Maximum Ambient Temperature: 300° F (149°C) Connection to Branch Line: 1-inch NPT Minimum Bend Radius of Flexible Stainless Steel Hose: 3 inches (76.2 mm) per UL Listing 8 inches- (203.2 mm) per FM Approval • The flexible stainless steel hose should not be bent within 21/2 inches (64 mm) of the connection nut at both ends. Equivalent lengths are shown with maximum number of 90 degree bends at the minimum bend radius. 2-45 degree or 3-30 degree bends equal 1-90 degree bend FM equivalent length calculation include sprinkler head Friction Loss. UL equivalent length calculation include the hose only. UL Maximum K-Factor of Sprinkler to be connected to Sprinkler Reducing Nipple: /3 inch outlets: 8.0 3/4 inch outlets: 11.2 FM Maximum K-Factor of Sprinkler to be connected to Sprinkler Reducing Nipple: /2 inch outlets: 5.6 3A inch outlets: 8.0 Listings and Approvals: Unbraided models are UL Listed Braided models are FM Approved and UL Listed FLEXIBLE HOSE - NON BRAIDED - - c®uS • LISTED NO. DESCRIPTION NO. DESCRIPTION 1 Flexible Hose /8" Nominal Diameter 5 Nipple 2 Ring 6 Reducer '/z"or'A" 3 Washer : 7 Plastic Cap 4. Slip Nut FLEXIBLE HOSE - BRAIDED C.' L . H APPROVED cULus LISTED \\ - . ____ . •. . I NO. DESCRIPTION NO. DESCRIPTION 1 Flexible Hose /8" Nominal Diameter 5 Nipple 2 Ring 6 Reducer 1/2"or '/4" 3 Washer . . . 7 Braid = \•' 4 Slip Nut . 8 Plastic Cap BRACKET ASSEMBLY NO. DESCRIPTION NO. DESCRIPTION 1 24 or 48 Support Bar 4 Hex Screw 2 Center Bracket Assembly 5 Wing Bolt 3 Clamp MATERIAL SPECIFICATIONS Corrugated Flexible Hose: SS304 Support Bar: G90 Galvanized Steel SEAL: EDDM Clamp and Center Bracket Assembly: G90 Galvanized Steel SLIP [1T AND NIPPLE: Zinc-Plated Carbon Steel Hex Screw and Wing Bolts: Zinc-Plated Carbon Steel Slip Nut and Nipple: Zinc-Plated Carbon Steel . Optional Tamper-Resistant Screw: Zinc-Plated Carbon Steel BRAID AND BRAID RING: SS304 FRICTION LOSS DATA UNBRAIDED HOSE UL LISTED MODEL INLET & OUTLET SIZE NPT INCH LENGTH INCH (mm) UL 3" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS UL LISTED — UNBRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 401" DIAMETER PIPE (C=120), FT 1 x ½ 28" (700mm) 2 22 28" (700mm) 2 SFN4OH 40" (1000mm) 3 39 SFN40T 1 X3 /4 1000mm) 54 SFN48H ___)00m 1 x½ 56 SFN48T 1xY4 63 SFN59H 1x½ (1500mm) 59 59(1500mm) 3 74 ___ 71(1800mm) 3 virl—T _______ 71(1800mm) 3 74 Series SFN models are unbraided/Series SF8 models are braided Unbraided hoses are UL Listed Braided hoses are FM Approved and UL Listed BRAIDED HOSE FM APPROVED AND UL LISTED MODEL INLET& OUTLET SIZE NPT INCH LENGTH INCH (mm) Iii 3" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS UI—BRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 40 1 DIAMETER PIPE )C=120), FT FM 8" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS FM BRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 401 INCH DIAMETER PIPE )C=120), FT SFB28H 1 x ½ 28" (700mm) 2 24 1 46.4 SFB28T 1 x% 28" (700mm) 2 29 1 - 39.1 SF8401-I 1 x½ 40(1000mm) 3 44 1 53.9 - SFB40T 1x% 40" (1000mm) 3 54 1 45.3 SFB48H 1x½ 48(1200mm) 3 63 2 73.4 SF8481 1x% 48" (1200mm) 3 55 2 64.3 SF8591-I 1 x ½ 59"(1500mm) 3 76 3 89.9 SF859T 1 X3/4 59__(1500mm) 3 70 3 86.5 SFB71H 1xVz 71(1800mm) 3 78 4 112.8 SFB71T 1x% 71)1800mm) 3 92 4 104.9 BRAIDED HOSE WITH ELBOW - FM APPROVED MODEL INLET & OUTLET SIZE NPT INCH LENGTH INCH (mm) FM 8" BEND RADIUS MAXIMUM NUMBER OF 90 DEGREE BENDS FM—BRAIDED HOSE MAXIMUM EQUIVALENT LENGTH OF SCH 401" DIAMETER PIPE (C=120), FT 1x ½ 28__(700mm) 1 48.4 SFB28T—E 28__(700mm) 1 SF840H-E 40" (1000mm) 55.9 SFB40T-E 1x Y4 ____________________ 0 1000mm) __________ 47.3 _______________________ SFB48H—E 1x½ 41 75.4 SFB48T-E 1xY4 66.3 SFBSYH — E (1500mm) _____________________ 91.9 _______________________ __________________________ SFBSST — E 59"(1500mm) 3 88.5 71"(1800mm) 4 I_1 x 3/4 71"(1800mm) 4 106.9 UUULC Listed 300 psi Description FPPI® TrimFit5 Bronze* Globe Valves are precision cast then machined using state of the art facilities. Each valve features a full floating seat holder for reduced seat wear when closing the valve. Seat is made of pure virgin PTFE for longer seat life and reduced maintenance as compared to rubber seat valves. TrimFit trim valves are suitable for use in regular (175psi) and high pressure (300psi) sprinkler systems. Standard configuration is FNPT x FNPT and is available in ¼" IPS through 2" IPS sizes. Each valve carries the UL Listing UL/ ULC Listed 2R97 Installation Specifications Install in accordance with usual and customary installation techniques for fire sprinkler systems Use a suitable thread sealant on the male threads of the pipe a?sr Bronze being threaded into the valve body. We recommend either FPPI PTFE Thread Seat-PTFE Sealing Tape or PipeFit® Thread Sealing Paste with PTFE. NEVER USE BOTH. Hand wheel-JIS FC 20 DO NOT OVERTIGHTEN. OVERTIGHTENING MAY CAUSE CRACKS OR painted red. LEAKS. Sizes: 06-798-00 1/4" IPS FNPT 06800-00 ½" 06-802-00 3/4" 06-804-00 1" 06-806-00 11/4" 06-808-00 11/2" • 06-810-00 2" *contains lead. Not for use in • water systems intended for human consumption D 3198 LIONSHEAD AVE CARLSBAD, CA 92010 TEL + 1760 599-1168 +1800344-1822 F/X + 1 800 344-3775 © 2015 Fire Protection Products, Inc. PipeFit, ThmFit® , and FPPI® are registered trademarks of Fire Protection Products, Inc. & C& LISTED LISTED Mrrr,JvIJ I 8007957 GST 10 X CPVC 1-1/2 300 1.5 8020957 SWG 10 X CPVC 1-1/2 300 1.5 8008957 GST20 X 2-1/2 850 1.5 X 4 1475 1.5 8068925 GST20SS X 2-1/2 850 1.5 8010957 GST30 X 4 1500 1.5 X 4 1475 1.5 8009925 GST25-380 X 4, 1500 1.5 8022925 SWG 25-380 X 3-1/2 - 4* 1500 1.5 8021957 SWG 20 X 2-1/2 3** •, 1250 .1.5 ... 8073925 SWG 20 SS X 2-1/2 1250 1.5 8139957 SHGST20 X 3 1050 1.5 X 4 1475 1.5 8141957 SHGST30 X 4 1500 1.5 X 4 1475 1.5 Minimum Minimum ULMaxPipe UL Test FWNhx FMTest BX PIN STEEL UL Steel FM Steel Size, in. Load Pipe Size Load i Thickness, n. Thickness, in. 8038957 DSTRI X 4 1500 0.035 X 4 1475 0.1050 8037957 DSTR 1-1/2. X 4 1,500 0.035 X 4 1475 0.1050 8039957 DSTR 516 X ' 4 1500 0.037 X 4 1475 0.1050 8045957 DST 516 X 4 1500 0.188 X 4 1475 0.1875 8046957 TEK50 X 4 1,500 0.250 X . 4 1,475 0.1875 8055957 SWDR 1 X 4 1500 0.037 X , 4 11475. 0.0600 8056957 SWDR 516 ' X 4 1500 ' 0.037. X 4 1475 0.0600 8054957 SWDR 1-1/2 X 4 1500 0.037 ' X' ' 4 1475 0.0600 8137957 SH DSTR 1 X 4 1500 ' 0.035 X 4 ' 1475 0.1050 8150922 XP 20 X 2 . ' 750 0.027 X .4 1475 0.1050 8153922 XP 35 . X 3-1/2 1250 0.043. X 4 1475 0.1050 BX PIN CONCRETE FM FM Max FM Test Material Pipe Size Load 8059957 CST 20 X 4 1475 3000 PSI 8061957 SWC20 X 4 1475 3000 PSI * SWG 25-380 Maximum pipe size in composite wood joist allowed by UL is 3-1/2 SWG 25-380 Maximum pipe size in wood timber or joist allowed by UL is 4" ** SWG 20 Maximum pipe size in composite wood joist allowed by UL is 2-1/2' ** SWG 20 Maximum pipe size in wood timber or joist allowed by UL is 3" UL and FM tests were performed in compliance with NFPA-13 Standards. Fastening requirement: 5 times weight of water filled schedule 40 pipe plus 250 pounds /;IT-;;'!"""",..", L " I.... Buildr#A W/JW. itwbuildex.com 800-284-5339 SSS26 0506 Fig. 65 Patent #4,570,885 Fig. 65 Dimensions • Weights Rod Size Max. Rec. Approx. A B C D E F Load Lbs.* Wt./100 3/8 1/l6 3/4 1 7/16 1 610 28 1/2 11/2 3/4 1 9/16 11/4 1130 55 5/8 1 /2 3/4 1 9/16 11/4 1130 55 * Max. loads for clamp with set screw in up or down position. Fig. 66 Dimensions 'Weights Rod Size Max. Rec. Approx. A B C D E F Load Lbs.* Wt./100 3/8 1 /16 11/4 1 7/16 1 610 28 1/2 1V2 1'/4 1 9/16 1'I4 1130 55 5/8 1/2 11/4 1 9/16 11/4 1130 55 * Max. loads for clamp with set screw in up or down position. Fig. 65 and Fig. 66 Reversible C-Type Beam Clamps 3/4" and 11/4 Throat Openings Size Range - (Fig. 65 and Fig. 66) 3/8", 1/2" and 5/8' rod Material - Carbon Steel with hardened cup point set screw and jam nut Function - Recommended for hanging from steel beam where flange thickness does not exceed 3/4" (Fig. 65) or 11/411 (Fig. 66). Features - All steel construction eliminates structural deficien- cies associated with casting type beam clamps. May be used on top or bottom flange of the beam. (Beveled lip allows hanging from top flange where clearance is limited.) May be installed with set screw in up or down position. Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp. Open design permits inspection of thread engagement. Approvals - Underwriters' Laboratories Listed in the USA (UL) and Canada (cUL). Factory Mutual Engineering approved. Conforms to Federal Specification WW-H-171E, Type 23 and Manufacturers Standardization Society SP-69, Type 19. Exceeds requirements of the National Fire Protection Association (NFPA), Pamphlet 13, 3/8" rod will support 1/2" thru 4" pipe, 1/2" rod will support 1/2" thru 8" pipe. Finish - Plain Note - Available in Electro-Galvanized and HDG finish. Order By - Figure number, rod size and finish (SA OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE • CORONA, CA 92879 • PR: 951737.5599 • FAX: 951.737.0330 CUSTOMER SERVICE • 800.786.5266 www.tolco.com A, Size Range - Secures 3/8" thru 7/8" rod in 1" increments Material - Carbon Steel Maximum Temperature - 750°F Finish - Plain Note - Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By Figure number, rod diameter, rod length and finish Dimensions Weights - Rod Max. Rec. Load Lbs. Size For Service Temps .650°F 750°F 3/8 610 540 1/2 1130 1010 5/8 1810 1610 3/4 2710 2420 7/8 3770 3360 Fig. 98 - Rod Stiffener Size Range - Secures 3/8" thru 7/8" hanger rod Material - Carbon Steel Function - Secures channel to hanger rod for vertical seismic bracing. Finish - Electro Galvanized Note - Available in HDG finish or Stainless Steel materials. Order By - Figure number I Ni Fig. 99 - All Thread Rod Cut to Length Fig. 100 - All Thread Rod Full Lengths Size Range - Secures 3/8' thru 7/8" rod in 10' lengths Material - Carbon Steel Maximum Temperature - 750°F Finish - Plain Note - Available in Electro-Ga Ivan ized and HDG finish or Stainless Steel materials. Order By - Figure number, rod diameter and finish Dimensions Weights Max Rec. Load Lbs. Rod For Service Temps Approx. Size 650°F 750°F WtJIOO 1/4 240 215 12 3/8 610 540 29 1/2 1130 1010 53 5/8 1810 1610 84 3/4 2710 2420 123 7/8 3770 3360 169 1 4960 4420 222 11/4 8000 7140 360 11/2 11630 10370 510 Office/Manufacturing Facility • 1375 Sampson Ave. • Corona. CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330 Customer Service • 800.786.5266 www(olco.com 112 THRU 2 NCH PIPE 2:112 ThRU 8 INCH PIPE Fig. 200 - "Trimline" Adjustable Band Hanger Size Range - 1/2" thru 8" pipe Material - Carbon Steel, Mu. Galvanized to G90 specifications Function - For fire sprinkler and other general piping purposes. Knurled swivel nut design permits-hanger adjustment after installation. Features - (1/2" thru 2") Flared edges ease installation for all pipe types and protect CPVC plastic pipe from abrasion. Captured design keeps adjusting nut from separating with hanger. Hanger is easily installed around pipe. (21/2" thru 8" Spring tension on nut holds it securely in hanger before installation. Adjusting nut is easily removed. Approvals - Underwriters' Laboratories listed (1/2" thru 8") in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and Factory Mutual Engineering Approved (3/4" thru 8"). Conforms to Federal Specifications WW-H-171 E, Type 10 and Manufacturers Standardization Society SP-69, Type 10. Maximum Temperature - 650° F Finish - Mil. Galvanized. For Stainless Steel materi- als, order TOLCOTM Fig. 200 WON. Order By - Figure number and pipe size A Dimensions • Weights Pipe Rod Size Max. Rec. Approx. Size Inch Metric A B Load Lbs. Length 1/2 3/8 8mm or 10mm 31/s 25/8 400 11 3/4 3/8 8mm or 10mm 31/8 21/2 400 11 1 3/8 8mm or 10mm 33/4 2/ 400 12 11/4 3/8 8mm or 10mm 33/4 21/8 400 13 11/2 3/8 8mm or 10mm 37/s 21/8 400 14 2 3/8 8mm or 10mm 41/ 3 400 15 21/2 3/8 10mm 5I 41/ 600 27 3 3/8 10mm 5 /8 . 4 600 29 31/ 3/8 10mm 73/s 51/ 600 34 4 3/8 10mm 73/s 5 1000 35 5 1/2 12mm 91/ 61/4 1250 66 6 1/2 12mm 101/8 6/4 1250 73 8 1/2 12mm 131/8 8/4 1250 ..- 136 Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330 1 I Customer Service • 800.786.5266 www.folca.com Fig. 69R - Retrofit Capable Beam Clamp Retaining Strap Size Range - 3/8" and 1/2" rod; 4" thru 16" length.** Material - Pre-Galvanized Steel Function - To offer more secure fastening of various types of beam clamps to beam where danger of movement might be expected. NFPA 13 requires the use of retaining straps with all beam clamps installed in earthquake areas. Satisfies requirements of NFPA 13 (1999) 6-4.7.1. Features - Beveled locking slot* is precisely formed to align with the threaded section of a hanger rod or set screw and engage the unit securely. May be used as shown in section "A-A" or inverted. Allows easy installation for new construction or retrofit applications. Important Note - Good installation practice of a retaining strap requires that the strap be held tightly and securely to all component parts of the assembly. Therefore a locking mecha- nism of some kind, such as the beveled locking slot of the Fig. 69R or a hex nut tightened against othertypes of retaining straps will provide a more secure and reliable installation. Approvals - Underwriters' Laboratories listed in the USA (UL) and Canada (cUL). Approved for use with any listed beam clamp. Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating.to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines. Finish - Pre-Galvanized Order By - Figure number, rod or set screw size and length Note - Minimum return on Strap: 1". * Patent #5,947,424 Dimensions -Weights - Rod Size A Length 3/8 Specify 1/2" Specify Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330 M Customer Service • 800.786.5266 www.tolco.com Fig. 25 - Surge Restrainer Size Range - One size fits 3/4" thru 2" pipe. Material - Steel Function - Designed to be used in conjunction with TOLCOTM Band Hangers to restrict the upward movement of piping as it occurs during sprinkler head activation or earthquake type activity. The surge restrainer is easily and efficiently installed by snapping into a locking position on the bank hanger. This product is intended to satisfy the requirements as indicated in the National Fire Protection Association (NFPA 13, 1999 Edition), 6-2.3.3, 6-2.3.4 and A-6i-2.3.3 Can be used to restrain either steel pipe or CPVC plastic Pipe. Approvals - Underwriters' Laboratories Listed .niy when used with TOLCO band hangers Fig. 2, 2NFPA and 200, in the USA (UL) and Canada (cUL). Finish - Pre-Galvanized Order By - Figure number and TOLCO band hanger, size from 3/4' thru 2'. Patent #5,344,108 Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951 737.5599 • Fax: 951.737.0330 Customer Service • 800.786.5266 www.tolco.com Aluminum & Stainless Steel Aluminum Alurmnum channelsi fittings and accessories offer excellent corrosion resistance and are suitable for many indoor and curdoo applications. Aluminum's high strength to weight ratio helps greatly reduce overall cost of installation through ease of handling and cutting. Channels are extruded from aluminum aloy 60E3-T6. Closure strips are extruded from aluminum alloy 6063-T5. Fittings and accessories are made from aluminum alloy 50E2-H32. Starless S-eel Whare corrosion problems persist and other material and fittings are ineffective, we recommerd use of corrosion resistant stainless steel channels and accessories. Channels and fittings are available in two types of stainless steel: SS4-AlSl —,,y--e 304 SS-AlSl Type 316 Fittings Moar fittings, as shown ir this catalog, can be supplied in aluminum or starless stee. Coitsut factors' for possible minimum production quantities and set-up charges. Load Data Aluminum Channel's approximate load data can be determined by multiplying load, data in te steel channel section of this catalog by a factor of 0.38. Stainless Steel Cbanne load data is t-ie same as the data in the steel channel section of this catalcg. Metric Metic di mensions are shown in parentheses. Unless notec, all metric dimensions are in millimeters. B-Line by 'E[*PJ 177 Strut Systems Aluminum Channel & Closure Strips B11AL Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 rn) and 20' (6.09 m) Material: Aluminum Weight: 1.06 Lbs./Ft. (1.58 kg/m) 31/4 5/8 (41.3) BI2AL Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 m) and 20' (6.09 m) Material: Aluminum Weight: .86 Lbs./Ft. (1.28 kg/m) 15/8 (41.3) B22AL Thickness: .105 (2.6 mm) Standard Length: 10' (3.05 m) and 20' (6.09 ml Material: Aluminum Weight: .66 Lbs./Ft. (0.98 kg/m) 15/s" (41.3) B22AAL • B24AL Thickness: .105 (2.6 mm) Thickness: .080 (2.0 mm) Standard Length: 10' (3.05 rn) and 20 (6.09 ml Standard Length: 10' (3.05 m) and 20' (6.09 ml Material: Aluminum Material: Aluminum Weight: 1.18 Lbs./Ft. (1.75 kg/m) \ Weight: .52 Lbs./Ft. (0.77 kg/m) 31/4 1/8" 1/8" )41.3) )41.3) B54AL Thickness: .080 (2.0 mm) Standard Length: 10' (3.05 ml and 20' (6.09 m) Material: Aluminum Weight: .37 Lbs./Ft. (0.55 kg/m) \\ 13/16" (20.6) 15/8 (41.3) B54AAL Thickness: .080 (2.0 mm) Standard Length: 10' (3.05 rn) and 20' )6.09 ml Material: Aluminum Weight: .57 Lbs./Ft. (0.84 kg/m) )41.3) 15/8 " (41.3) B217AL Closure Strip Standard Length: 10' (304.8 cm) Material: Aluminum Weight: .15 Lbs./Ft. (0.23 kg/m) B217P Plastic Closure Strip Standard Length: 10' (304.8 cm) Material: PVC Weight: .09 Lbs./Ft. (0.14 kg/m) B217FFAL Closure Strip Standard Length: 10' )304.8 cm) Material: Aluminum Weight: .16 Lbs./Ft. (0.24 kg/m) 1/16" i 36.5) 4 5/8 (15.9) )36.5) Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. B-Line Strut Systems 178 by ETH I 2"P. (5O./ H/ x 11/8' Slots (14.2) (28.6) /16" (14.2) Dia. Holes Thickness H Wt./C Part No. in. mm in. mm Lbs./Ft. kg/rn B12H17/8 AL .105 (2.6) 2I16" (61.9) .86 (1.28) 13221-1117/8 AL .105 (2.6) 1/8" (41.3) .66 (.98) B24H1718 AL .080 (2.0) 1/8" (41.3) .52 (.77) B54H17/8 AL .080 (2.0) 13/16" (20.6) .37 (.55) Conduit or Material Design Part No. Pipe Size Thickness Load I in. mm in. mm Lbs. kN Lbs. kg B2001 AL /8" (10) .063 (1.6) 180 (.80) 4 (1.8) B2008 AL 1/2" (15) .063 (1.6) 180 (.80) 4 (1.8) B2009 AL 3/4 (20) 080 (2.0) 270 (1.20) 6 (2.7) B2010 AL 1" (25) .080 (2.0) 270 11.201 7 (3.2) B2011 AL 11/4 (32) 080 (2.0) 270 (120) 8 (36) B2012 AL 11/2" (40) .100 (2.5) 360 (1.60) 11 (5.0) B2013 AL 2 (50) 100 (25) 360 (1.60) 12 (54) B2014 AL 21/2" (65) .100 (2.5) 360 (1.60) 13 (5.9) B2015 AL 3" (80) .100 (2.5) 360 (1.60) 16 (7.2) B2016 AL 31/2" (90) .125 (3.2) 450 (2.00) 22 (10.0) B2017 AL 4" (100) .125 (3.2) 450 (2.00) 24 (10.9) B2018 AL 41/2" (115) .125 (3.2) 450 (2.00) 26 (11.8) B2019 AL 5" (125) .125 (3.2) 450 (2.00) 27 (12.2) B2020 AL 6" (150) .125 (3.2) 450 (2.00) 33 (14.9) l/8" Typ. (47.6) Aluminum SH Type Channel K06 Type Knockout Channel Material: Aluminum • Material: Aluminum Part No. Thickness in. mm H in. mm Wt./C I Lbs./Ft. kg/rn B12SH AL .105 (2.6) 2/16" 161.91 .83 (1.23) B22SH AL .105 (2.6) 1/8" (41.3) .63 (.93) B24SH AL .080 (2.0) 1/8" (41.3) .49 (.73) _B54SH AL .080 (2.0) 13/16" (20.6) .34 (.50) %- H-17/8 Type Channel Material: Aluminum GV Thickness H Wt./C Part No. in. mm in. mm Lbs./Ft. kg/rn B12KO6AL .105 (2.6) 2/16" (61.9) .86 (1.28) 13221(06 AL .105 (2.6) 1/8" (41.3) .66 (.98) B24K06 AL 080 (20) 1I8 (41.3) 52 1771 AL .080 (2.0) -_ 13541(06 13/16" (20.6) .37 (.56) B2000 Series Rigid Conduit Clamps Safety Factor of 5 Machine Screw and Square Nut included Pipe clamp material 5052-H32 Design Load B-Line Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. by 9TN 179 Strut Systems it S Aluminum Aluminum Fittings Most fittings, as shown in this catalog, can be supplied in aluminum. See "Fittings" Section (page 73) of this catalog. Consult factory for possible minimum production quantities and set-up charges. Channel Nuts We recommend the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength and slip resistance, use the channel nut information provided on pg. 51 & 52. A (.70) multiplier is to be applied to obtain the appropriate derated values for aluminum channel. Spring Nut Nut Without Spring Nuts for B12 Channel Part Number With Without Thread Thickness Wt./C Spring Spring Size in. mm Lbs. kg N724SS6 N224W0SS6 1 /4"..20 1/4" (6.3) 6.6 (3.0 N728SS6 N228W0556 3/8"-16 3/8 (9.5) 10.6 (4.8) - N725556 i N225W0SS6 1/2"..13 /8" (9.5) 9.7 (4.4) Nuts for B22, B24 Channels Part Number With Without Thread Thickness Wt./C Spring Spring Size in. mm Lbs. kg N224SS6 N224W0SS6 1/4"..20 1 /4" (6.3) 6.6 (3.0) N228SS6 N228W0556. 3/8"-16 /8" (9.5) 10.6 14.81 N225S56 N225W0SS6 i 1/2".13 /8" (9.5) 9.7 14.41 Nuts for B54 Channel Part Number With Without Thread Thickness Wt./C Spring Spring Size in. mm Lbs. kg N524556 N224W0SS6 1/4"..20 1/4" (6.3) 6.6 (3.0) N528SS6 N228W0SS6 /"-16 /8" (9.5) 10.6 (4.8) N525556 N525W0SS6 112"..13 /8" (9.5) 1 9.7 (44) Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. Strut Systems 180 B-Line by ET•41 I 1 5/8 " (41.3) 15/8 " 141.31 (25.4) 13/16" (20.6) 13/16" (20.6) Thickness H Wt./C Part No. I in. mm I in. mm I Lbs./Ft. kg/rn B22SH SS4 12 Ga. (2.6) 1/8" (41.3) 1.82 (2.70) B22SH SS6 12 Ga. (2.6) 1/8" (41.3) 1.82 (2.70) B24SHSS4 14 Ga. 11.91 1/8" (41,3) 1.34 (1.99) B24SH SS6 14 Ga. 11.91 1/8" (41.3) 1.34 (1.99) B32SH SS4 12 Ga. (2.6) 1/8" (34.9) 1.62 (2.41) B42SH SS4 12 Ga. (2.6) 1" (25.4) 1.36 )2.02( B52SH SS4 12 Ga. (2.6) 13/16" (20.6) 1.23 (1.83) B52SH SS6 12 Ga. (2.6) 13/16" (20.6) 1.23 (1.83) B54SH SS4 14 Ga. 11.91 13/16" (20.6) .91 (1.35) B54SH SS6 14 Ga. (1.9) 13/16" )20.6) .91 (1.35) Stainless Steel B22SS* B24SS* *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 12 Ga. 12.6 mrnl Standard Length: 10' 13.05 ml and 20' 16.09 ml Material: SS4, SS6 Weight: 1.90 Lbs./Ft. (2.83 kg/m) B32SS4 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' (3.0.5 ml and 20' (6.09 rn) Material: SS4 Weight: 1.70 Lbs./Ft. (2.53 kg/m) *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 14 Ga. (1.9 mm) Standard Length: 10' (3.05 ml and 20' (6.09 ml Material: SS4, SS6 Weight: 1.40 Lbs./Ft. (2.08 kg/m) B42SS4 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' (3.05 ml and 20' (6.09 ml Material: SS4 Weight: 1.44 Lbs./Ft. (2.14 kg/m) B52SS* *Substitute 4lor Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 12 Ga. (2.6 mm) Standard Length: 10' 13.05 ml and 20' 16.09 ml Material: SS4, SS6 Weight: 1.27 Lbs./Ft. (1.89 kg/rn) B54SS* *Substitute 4 for Stainless Steel Type 304 or 6 for Stainless Steel Type 316 Thickness: 14 Ga. (1.9 mm) Standard Length: 10' 13.05 ml and 20' (6.09 ml Material: SS4, SS6 Weight: .97 Lbs./Ft. (1.44 kg/m) SH Type Channel H-17/8 Type Channel 17/8"Typ. (14.2) Dia. Holes H Thickness) H Wt./C Part No. I in. mm in. mm I Lbs./Ft. kg/rn B22H17/8SS4 112 Ga. (2.6) 1/8" (41.3) 1.85 (2.75) B22H17/8 SS6 112 Ga. 12.61 1/" (41.3) 1.85 (2.75) B24H17/8 SS4 14 Ga (1.9) 1/8 (41.3) 1.36 (202) B24H17/8SS6 14 Ga. (1.9) 1/e" 141.31 1.36 12.021 B32H17/8 SS4 12 Ga 1261 1 1/ (349) 1.65 12451 B42H17/8 SS4 12 Ga. (2.6) 1" 125.41 1.39 (2.07) B54H17/8 SS4 14 Ga. 11.9) 13/16" (20.6) .93 (1.38) B54H17/8SS6 14 Ga. (1.9) 1 13/16" (20.6) .93 (1.38) 2" Typ. (50.8)) Slots H (14.2) (22.2) B-Line Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. by fT•J 181 Strut Systems Stainless Steel Stainless Steel Fittings Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See Fittings" section (page 73) of this catalog. .. Consult factory for possible minimum production quantities andset-up chrges. B2000 Series Pipe & Tubing Clamps Safety Factor of 5 Combination Recess Hex Head Machine Screw and Square Nut included Material: Stainless Steel Type 304 & 316 uesign Load Conduit or Material I Design Part No. Pipe Size Thickness 1, Load Wt./C in. mm in. mm i Lbs. kN Lbs. kg 82001 SS4 /8 (10) 16 Ga (1.5) 400 1.78) 10 (4 5) B2008 SS4 1 /2" (15) 16 Ga. (1.5) 400 1.78) 1.1 (5.0) B2009 SS4 3/4 (20) 14 Ga (l 9) 600 (2,67) 1 5 (68) B2010 SS4 1 (25) 14 Ga (1.9) 600 (2.67) 16 (72) 82011 SS4 11/4 (32) 14 Ga (1.9) 600 (2.67) 20 (91) B2012 SS4 11/2" (40) 12 Ga. (2.6) 800 (3.56) 30 (13.6) B2013 SS4 2 (50) 12 Ga (26) 800 (356) 34 (154) B2014 SS4 21/2" (65) (12 Ga. (2.6) 800 (3.56) 38 (17.2) B2015 SS4 3 (80) 12 Ga (2.6) 800 (356) 44 (199) B2016 SS4 31/2" (90) 112 Ga. (2.6) 1000 (4.45)) 51 (23.1) B2017 SS4 4 (100) 12 Ga (26) 1000 (445) 55 (249) B2018 SS4 41/2" (115) 112 Ga. (2.6) 1000 (4.45) 59 (26.7) B2019 SS4 5 (125) 12 Ga (2.6) 1000 )446) 64 (290) B2020 SS4 6" (150) 112 Ga. (2.6) 1000 (4.45)) 80 (36.3) Channel Nuts . g,- CHnnnI Mite ri, ill_ni it ctrcnnth onrl olin rooiotinnrn i ion tha - data shown on pages 50&51. Note: Reduce slip load by 50% due to hardness of material. . Spring Nut Nut Without Spring Nuts for B22, B24, B32 Channels With Without Thread . Thickness Wt./C Spring Spring Size in. mm Lbs. kg N224SS6 N224W0SS6 1/4"20 1/4" (6.3) 6.6 (3.0) N2285S6 N228W0S56 3/ 16 3/ (9-5) 10.6 (4.8) N225SS6 N225W0556 1/2"13 /8" (9.5) 9.7 (4.4) Nuts for B42, B52, B54 Channels Part Number With Without Thread Thickness Wt./C Spring . Spring 1 Size in. mm Lbs. kg N524SS6 N224W0SS6 j 1/"..0 1/4" (6.3) 6.6 (3.0) N5285S6 N228W0S56 16 /8 (9 5) 10.6 148) N525556 ) N225W05S6 ( 1/"..3 /8" (9.5) 9.7 (4.4) Reference page 177 for general fitting specifications. Other channel combinations available-see steel section for styles. B-L,ne Strut Systems 182 by EiN Threaded Accessories HN - Standard Hex Nut (TOLCO Fig. 113) (PTOLCO Size Range: 114°.20 thru /8-9 Material: Steel Finish: Plain or Electro-Galvanized. Contact B Line for alternative finishes and materials Order By Figure number size and finish Part For Width Across Width Across Approx. Number Rod Size Flats Points Thickness W000 in. (mm) in. (mm) in. (mm) lbs. (kg) HN 1/4 1/4 20 ,16 (111) ½ (127) /32 (57) 07 (03) FIN-3/8 i8 -16 9M° (14.3) 21/32° (16.6) 21/64° (8.3) .1.6 (0.7) HN 112 ½ 13 3/4 (190) (218) /16 (111) 37 (17) HN-5/B j8°-11 15M° (23.8) 1/32" (27.8) 35/64° (13.9) 7.3 (3.3) HN 3/4 3/4 10 1', (286) 1/16 (333) 41/64 (163) 120 (54) HN-1/8 1N-9 15A6 (33.3) 1/64° (38.5) 3/4° (19.0) 19.0 (8.6) HHN - Heavy Hex Nut (TOLCO Fig. 114) Size Range: 1/4°..20 thru /8-9 Material: Steel Finish Plain or Electro Galvanized Contact B-Line for alternative finishes and materials. Order By: Figure number size and finish Part For Width Across Width Across Approx. Number Rod Size Flats Points - Thickness Wt./100 in. (mm) in. (mm) - in. (mm) lbs. (kg) HHN-1/4 ¼-20 ½ (12.7) 31/54 (14.7) 15/64° (5.9) 1.2 (0.5) HHN-3/s 3W-16 11/16" (11.5) 51/64 (0.2) 23/64" (9.1) 3.1 (1.4) HHN-1/2 ½°-13 71t (22.2) 11, (28.6) 31/54g. (12.3) 6.5 (2.9) HHN-5/e %-11 11A6 (27.0) 115,t4" (31.3) /64° (15.5) 12.0 (5.4) HHN 3/4 3/4 10 11/4 (31 J) 129,'t4 (369) /64 (186) 190 (86) HHN-1/e 1,B-9 17A6 (36.5) 12142 (42.6) /64° (21.8) 30.0 (13.6) B-Line by f[44 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 102 Fire Protection Solutions - a I Threaded Accessories AN - Flat Washer (TOLCO Fig. 115) Size Range: 1/4"..20 thru 1"-8 rods Material: Steel Finish: Plain or Electra-Galvanized. Contact B-Line for alternative finishes and materials. Order By: Figure number size and finish Part For Outside Approx. Number Rod Size Diameter W000 in. (mm) lbs. (kg) FW-/4 '/4"2O 3/4 (19.0) 0.7 (0.3) F'W-3/8 3N-16 1" (25.4) 3.9 (1.7) FW-1/2 ½"-13 (34.9) 6.7 (3.0) FW-5/a 5,B"-11 13/4" (44.4) 7.3 (3.3) FW-3/4 3/4"-10 2' (50.8) 11,0 (50) 21/4" (51.1) 19.0 (8.5) FW-1 1"-8 2½' (69.8) 22.0 (10.0) LW - Lock Washer (TOLCO Fig. 117) Size Range: 1/4".20 thru 1"-8 rods Material: Steel ( " Finish: Plain or Electra-Galvanized: Note Available in Hot Dip Galvanized finish or Stainless Steel materials Order By: Figure number size and finish Part For Outside Approx. Number Rod Size Diameter Wt./100 in. (mm) lbs. (kg) W-20 .49" (12.4) 0.3 (0.13) LW-3/8 W-16 .68" (17.3) 0.6 (0.27) ½"-13 .88 (22.3) 1.3 (0.59) LW-5/8 b"_11 1.08 (27.4) 2.4 (1.09) LW-/4 3/4 -10 1.27" (32:2) 3.8 (1.72) 1.46" (37.1) 5.9 (2.61) LW1 1"-8 1.66" (42.1) - 8.8 (3.99) FAN' flat Fender Waslw (TOLCO Fig. 119) Size Range: /8"-i6 and 1/2"13 rod Material: Steel Function: To provide a greater bearing surface than standard washer. Finish: Plain or Electra-Galvanized. Contact B-Line for alternative finishes and materials. ) Order By: Figure number and size Part For Inside Outside Approx. Number Rod Size Diameter Diameter W000 in. (mm) in. (mm) lbs. (kg) FFW-3/8 3W-16 ½ (12.7) 1W (28.6) 3.0 (1.3) FFW-1/2 14-13 06 (14.3) 2 (50.8) 2.8 (1.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. B-Line Fire Protection Solutions 103 by