Loading...
HomeMy WebLinkAbout5592 EL CAMINO REAL; ; FPC2020-0193; PermitPERMIT REPORT (ity of Carlsbad Print Date: 01/25/2021 Job Address: 5592 EL CAMINO REAL, CARLSBAD, CA 92008-7120 Permit Type: FIRE-Construction Commercial Work Class: Special Equipment Parcel #: Track #: Valuation: $0.00 Lot #: Occupancy Group: Project #: #of Dwelling Units: Plan #: Bedrooms: Construction Type: Bathrooms: Orig. Plan Check #: Plan Check #: Project Title: Description: CARLSBAD SENIOR HOUSING -NEW DISTRIBUTED ANTENNA SYSTEM Applicant: AJ KIRKWOOD AND ASSOCIATES INC 4300 N HARBOR BLVD FULLERTON, CA 92835-1091 (714) 788-7043 Permit No: FPC2020-0193 Status: Closed - Finaled Applied: 11/12/2020 Issued: 12/17/2020 Finaled Close Out: 01/25/2021 Inspector: Final Inspection: FEE AMOUNT FIRE Special Equipment (Ovens, Dust, Battery) $417.00 Total Fees: $417.00 Total Payments To Date: $417.00 Balance Due: $0.00 Fire Department Page 1 of 1 1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 760-602-8561 f I www.carlsbadca.gov t1 ERq1. 0 ow I' 0VEE0 Beginning 1886 A1 11 KIRKWOOD & A SSOCIA TES, INCo CONSTRUCTION-ENGINEERING 'SYSTEMS TECHNOLOGIES Subject: Carlsbad Senior Housing DAS Date 12/07/2020 Attention: Dennis Grubb and Associates I, Eric Fiorino, as the FCC Licensed and iBwave Certified designer attests that all designs for the Public Safety Emergency Responder Radio Coverage System to be installed within Carlsbad Senior Housing located at 5592 El Camino Real Carlsbad, CA 92008 will be designed per CBC, NFPA 72 and 1221 standards. Signed, Eric Fiorino FCC # PG00058610 4300 N. Harbor Blvd' Fullerton, California 92835 TEL: (714) 505-1977 • FAX: (714) 505-7030 email: ajk-a@ajk-a.com A111 KIRKWOOD & ASSOCIATES, INC. CONSTRUCTION-ENGINEERING 'SYSTEMS TECHNOLOGIES Beginning 1886 Subject: Carlsbad Senior Housing DAS Date 12/07/2020 Attention: Dennis Grubb and Associates I, Mike Puskas, as the FCC Licensed and ADRF Certified installer attests that all installations for the Public Safety Emergency Responder Radio Coverage System to be installed within Carlsbad Senior Housing located at 5592 El Camino Real Carlsbad, CA 92008 will be installed per CBC, NFPA 72 and 1221 standards. Signed, Mike Puskas FCC *1 PG00058613 4300 N. Harbor Blvd• Fullerton, California 92835 TEL: (714) 505-1977 • FAX: (714) 505-7030 email: ajk-aQajk-a.com Beginning 1883 Carlsbad Senior Housing 5592 El Camino Real, Carlsbad, CA 92008 DAS SUBMITTAL 1 1 /10/2020 A. J. Kirkwood & Associates, Inc. 4300 N Harbor Blvd, Fullerton CA 92835 • 714.505.1977 • Fax: 714.505.7030• Carlsbad Senior Housing 5592 El Camino Real, Carlsbad, CA 92008 Manufacturer Device Model # Description ADRF PSR-78-9533-X Bi-Directional Amplifier ADRF ADRF-BBL-X-24 Battery Backup DASalert 1221-B Annunciator and Monitoring Panel Windy City SG-ICA12-50JPLLR '/2" Coaxial Cable, Plenum Rated (Aluminum Jacket) RFS ICA12-50JPL '/2" Coaxial Cable, UV Rated (Blue Jacket) Commscope C-XX-UW-N-Ai6 6/10 dB, Air Directional Coupler Commscope S--CPUSE-L-N 2-Way Low Power Splitter Windy City NM-LCF12-0O2-6 '/2" Connector, Type -N Male RFS RFSNM-LCF12-0O3 'A" Connector, Type -N Male Commscope CELLMAX-O-CPUSE Omni In-Building Antenna, 698-960 MHz Westell CSI-AY/746-896/11 Donor Antenna, 746-896 MHz Times Microwave LP-BTR-NMP Coaxial Surge Protector ROHN FRM238SP5 Outdoor Mast Flat Roof Non-Penetrating Mount ROHN FRIVIMAT Mat Kit for Roof Mount PSR-78-9533-X Channelized Digital Repe Public Safety 700/800 M The PSR-78-9533-X is a revolutionary digital public safety repeater designed to protect the lives of first responders and building occupants. Through the use of digital signal processing (DSP) filtering technology, the PSR-78-9533-X helps eliminate adjacent channel interference to allow band selectivity and support for 700 MHz and 800 MHz Public Safety frequencies including FirstNet. Up to two non-contiguous wideband and thirty-two non-contiguous narrowband filters can be simultaneously supported in the 700 MHz and 800 MHz Public Safety frequencies via ADRF's celebrated web-based GUI, which provides versatility and total control to the user. The PSR-78-9533-X is the best-in-class public safety repeater with FirstNet support and it is fully compliant with International Fire Code (lFC) and National Fire Protection Association (NFPA). O Tested and approved under UL 2524, Second Edition by MET Laboratories, Inc. as comprehensive solution with an annunciator and ADRF BBx Series battery backups 0 NFPA 72 2016 code compliant and FirstNet compliant o Alarming output to supervised circuits for: antenna, amplifier, AC or DC power supply, battery, and charger failure including oscillation detection with automatic amplifier shutdown routine O Type 4 (UL50/UL50E) Enclosure O Simultaneously supports FCC Part 90 Class A narrowband and Class B wideband repeater designations C Up to 95 dB of gain and up to 33 dBm downlink and 30 dBm uplink output power per band 0 Product Specifications PSR-78-9533-X (Public Safety 700/800 MHz Channelized Digital Repeater) Electronic Specifications Downlink 1-- - Uplink 1Frequency Range L ------------ ----—---ir —r - - FirstNet+ PS 700 1758-768 MHz 788-798 MHz 769 - 775 MHz L -8o5 MHz -1 6o I861 M 816 tfJet / PS 700 / FirstNet + PS 700 33dBm 30 dBm Composite Output Power LtmGL. - - - - - - Filter Selection PS 800 - 33dBm 30 dBm FirstNet + PS 700 + PS 800 Wideband 36 dBm (33dBm + 33dBm) 30 dBm J{95 dB - Eg -- 2 (non-contiguous) Narrowband N Mode) Up to 16 (non-contiguous) @ PS 700 Up to 16 (non-contiguous) @ PS 800 r-------------...._. Narrowband (Si Mode) Up to 12 (non-contiguous) @ PS 700 Up to 20 (non-contiguous) @ PS 800 Narrowband (S7 Mode) Up to 32 (non-contiguous) @ PS 700 Narrowband (S8 Mode) Up to 32 (non-contiguous) @ PS 800 LWideband - - ]35,6,1OMHz -- - --------------__________ [Narrowband - 11,12.5, 25, 75,100,150 200 KHz Wideband 60 dBc @ Filter Bandwidth Edge + 1 MHz LNarrowband ~60dBc @ Filter Bandwidth Edge + 3xFilter BW - - FCC Rule Compliant - - 12 dB dB ~45dB jdB Wideband f5 6 r - Filter Bandwidth Filter Roll-off - Spurious Emission - - Passband Ripple ~C Dynamic Range - - Gain Dynamic Range [ Figure Max. Gain System Group Delay 5 46 l.ls 12.5 KHz, 15 28 s @ 25 KHz, !g 18 ps 75 KHz, 4Narrowband 5 15 us @ 100 KHz, s 13 is @150 KHz, 5 12 us @ 200 KHz [Power Supply -24OVAC,60Hz(FreeVoltage,w/batterybackupfuncb'on) Power Consumption 4.1-, 163 [ Max RF Input Power without Over D1vOdBm - - - - - Enclosure Cooling jConvection Max RF Input Power without Damage r -- I+10dBm Impedance 50c VSWR - -- -- Dry Contacts JNFPA 1221 2016 Code Compliant - - - - - - - -- -- - - - - - Remote Alarming! Network Management Dry Contacts, Web-GUl,SNMP (External Wireless Modem Requed) - - - -- - Humidity - 95% RH Condensed Operating Temperature i -40°F to +140°F (-40°C to +60°C) - - Certification cator Decibel Level MET Classified for UL 2524 Fire & Shock I FCC: Part 90 Class A/ Class B [~2nun 00dB@ Mechanical Soecifications LD~imension (Repeater Annunciator) - 11.0x 9.0x21.3 in (w/o bracket) 15.1_x4 x 6.32 in (w/o bracket) Weight (Repeater I Annunciator) lbs (w/o b'acket) 12.5 lbs (w/o bracket) RF Connector j14.3-10 (Female) 1 Weather Resistance Type 4 (UL50/UL5OE) ,ADRF=BBL=X Series (UL 2524 Certified 12V / 24V / 48V Battery Backup Solutions for ADRF Public Safety Repeaters/DAS) UL 2524 certified with PSR-78-9533-X, PSR-78-9537-X, and PSR-VU-9537-X Includes single cable between battery and DAS / repeater NFPA 2016 compliant including 12-hour runtime and battery disconnect alarm Increase runtime by adding unit using parallel cable (ADRF-BBX-CBL-21P) Increase voltage by adding unit using series cable (ADRF-BBX-CBL-21S) O Available in 12V, 24V, 48V solutions O Optional wall mount kit available (ADRF-BBL-X-WMK) Electrical Specifications ADRF-BBL-X-12 ADRF-B13L-X-24 ADRF-BBL-X-24 (x2) Voltage 12V 24V 24V / 48V • Operating Battery Capacity 240Ah 120Ah 240Ah / 12OAh Configuration Parallel - - - Series -- Parallel/ Series Battery Type Lead Acid Lead Acid Lead Acid Mechanical Specifications ADRF-BBL-X-12 ADRF-BBL-X-24) ADRF-BBL-X-24 (x2) Limension - - 1734x 17.34x12.14 in. 17.34x17.34x12.14 in. - 17.34 x17.34 x 12,14 - Weight (Enclosure) 42.1 lbs. 42.1 lbs. 42.1 lbs. (x 2) Weight (Batteries) 700 lbs. (x2) 7001bs(x2) 700 lbs. (x4) j Weather Resistance Type 4 (UL5O/UL5OE) Type 4 (UL50/ULSOE) Type 4 (UL5O/UL5OE) 'Cooling - -- Air Convection Air Convection Air Convection Mounting Type Ground (with wheel locks) or Wall (optional brackets) Battery Runtime ADRF-BBL-X-12 (ADRF-BBL-X-24 ADRF-BBL-X-24 (x2) 'ADXV PS HE (for 4 RU/8 RU) 63.8 / 43.5 hours - - ADXV-R-3378P-N4X - 61.2 hours - ADXV-R-25VU-N4X - 55.8 hours - FiRe-78-4 - 30 hours - jFiRe-78-4+FiRe-AAI - . - 28.1 hours - PSR-78-9533-X (singleY dual band) - c28./ 22.8 hours - - - 24.3 hours PSR-78-9537-X (single / dual band) - - 17.4 / 14.9 hours - PSR-VU-9537-X (VHF! UHF) , - - - 30.7 hours DASalert Models 1221-A & 1221-B Meets NFPA-72 (2010, 2013 & 2016) and current NFPA-1221 codes for a Dedicated Annunciator and Monitoring Panel Displays Status of: W; U90 Donor Antenna AC Power Battery Capacity Battery Charger System Status Includes Form-C relay contacts to interlace with any fire alarm system Monitors communications link for integrity Includes independent circuitry to check antenna, AC power, battery capacity, charger and overall system status Mates with or augments monitoring of any BOA, antenna, charger, battery or UPS Low cost, easy to install and program Small size NEMA-4: 1 0"H x 8"W x 4"D Backed up by internal battery (included) Easy installation to optional primary power sources: 48 VDC or 24 VDC, or 120 VAC Model 1221-A Monitor and Annunciator Panel - Typical Application Outdoor Antenna BDA AC POWER BATTERY VAC COMM FAULT Fault Outputs to Fire Alarm System To Indoor Antennas T 24-Hour Battery Backup Optional OCPower 48 VDC or 24 VDC Code Requirements The current edition of the NFPA 1221 fire code (shown below) and NFPA-72 (2010, 2013 & 2016) describe Sthe requirements for monitoring the performance of Public Safety in-building two-way Radio Enhancement Systems with a dedicated panel. This panel is required to be located in the fire command center but some jurisdictions require that it be located in the same room as the Radio Enhancement System. These panels are designed to meet all these requirements. In addition, Model 1221-A contains additional circuitry to enhance and augment the alarm sensing capabilities of the BDA and the DAS backup emergency power supply if they are not code compliant. Fault Signaling Relays Some DAS components are not configured with the appropriate Form-C alarm relays that can interface properly with all Fire Alarm Systems. This unit provides these alarm relays. They can be programmed to mate with any Fire Alarm System with their 'normally OFF' or 'normally ON' states for any 'fail safe' convention that is required by the Fire Alarm System. Enclosure & Power Requirements The enclosure is NEMA-4 rated consistent with the other requirements of the code and a small backup battery (included) inside the panel provides over 24 hours of service if this is needed to supplement loss of primary power. Primary power is provided by an AC socket-mounted 15 VDC power supply (included). Communication Integrity Per code, fault detection cables between the Radio Enhancement System and the panel are monitored to detect open circuits or short circuits to ground. If this condition is detected the panel will trigger a fault alarm to the Fire Alarm System signaling the loss of communications integrity. Antenna Monitoring (Model 1221-A) S If the bi-directional amplifier (BDA) in the Radio Enhancement System does not have the capability to monitor donor antenna faults, the panel can provide this by adding external Bias-Ts in line with the antenna. The panel will detect common faults such as open circuits, short circuits, disconnected or severed cables leading to the antenna without impacting the RF performance of the system. Installation This panel provides an economical easy-to-install solution to meeting the code requirements and the flexibility to interface with and augment, if required, the fault detection and alarm signaling capabilities of a large variety of standard components used in these systems. The small size and light-weight enclosure can be wall-mounted into any installation. Model Comparison Module Model 1221 A Model 1221 B Annunciator System with FORM-C relay outputs to main fire alarm installation VI / Alternative Donor Antenna Failure Sense Module (Bias-T fittings not included) / Alternative DAS Battery Capacity Sense Module / Alternative DAS Battery Charger Failure Sense Module / Annunciator System Backup Battery (9 Ahr) / VI An ciat nunor System Power Supply and Battery Charger / VI 0 Models 1221A and 1221B Module Descriptions Annunciator System with FORM-C relay outputs to main fire alarm system (Models 1221A & Model 1221B) 0 This is the basic annunciator system that accepts ALARM signaling from external relays contained in the DAS equipment. The system accepts relay signaling indicating the following alarms: Loss of AC Power Amplifier Problems Antenna Problems DAS Battery Capacity below 30% DAS Battery Charger Fail Communications Faults Summary System Alarm The annunciator system provides FORM-C dry relay contacts to provide alarm signaling with any fire alarm installation. The system will operate with DAS installations that include multiple amplifiers, antennas and power sources, and includes circuitry to detect communications faults (open or short circuits) with the DAS equipment. Annunciator System Backup Battery Both models are shipped with an 9 Ahr rechargeable SLA battery that mounts inside the enclosure to provide over 24 hours of backup power. Annunciator System Power Supply and Charger Both models are shipped with an external 15 VDC power supply and battery charger that can be is connected to any 120 VAC power outlet. The battery charger includes indicators that show the health of the panel's backup battery. The need to replace this battery can be signaled to the building's main fire alarm system. Alternative Donor Antenna Failure Sense Module (Mode! 1221-A only) This module provides a means of detecting open circuit, short circuits, disconnected, severed or lose connector problems in the antenna feed from the donor. This circuitry utilizes external bias-T fittings (not included). Multiple antennas can be connected in parallel to the same monitoring port. Model 1221A should be used if your amplifier or other components in your installation do not have the means of detecting donor antenna problems. Alternative DAS Battery Capacity Sense Module (Model 1221-A only) If your installation has a backup battery to provide emergency DAS power in the event of an AC power failure it must be monitored to detect when it has less than 30 % capacity left to power the system when primary power is lost. Model 1221A should be used if your emergency power unit does not have this capability. Alternative DAS Battery Charger Failure Sense Module (Mode! 1221-A only) If your installation has a backup battery to provide emergency DAS power in the event of an AC power failure, the battery charger must be monitored to detect if it has failed or is degraded. Model 1221A should be used if your charger unit does not have this capability. S Excerpted from NFPA 1221 (2016 Edition): Similar requirements in NFPA-72 (2010, 2013, 2016) Standard for Installation, Maintenance, and Use of Emergency Services Communications System 9.6.13.2 Dedicated Panel. (1) A dedicated monitoring panel shall be provided within the fire command center to annunciate the status of all RF emitting devices and system component locations. The monitoring panel shall provide visual and labeled indications of the following for each system component and RF emitting device: Normal ac power Loss of normal ac power Battery charger failure Low battery capacity (to 70 percent depletion) Donor antenna malfunction Active RF emitting device malfunction System component malfunction (2) The communications link between the dedicated monitoring panel and the two-way radio communications enhancement system must be monitored for integrity. Specifications s 10" x 8" x 4" Fault inputs from RadioCharger EnhancementBattery System Donor Antenna OK / Fail 11.7 lbs Amplifier OK / Fail OK /Fail Capacity OK / Low AC Power ON / OFF y Relay FForm System AC Power System (Summary Alarm)Donor Analog Inputs DAS Antenna Sense Amplifier (BDA) Battery +1- Antenna Battery Charger Certifications I UL: E65324, ETL: 4002961 Battery Capacity Power 120 VAC, 24 VDC or 48 VDC (100 mA max) Communications Fault ATTENUATION AND POWER RATING FREQUENCY MHz Attenuation dB/100m dB/lOOft Power kW 0.5 0.16 0.05 40.00 1 0.23 0.071 32.80 1.5 0.28 0.087 26.80 2 0.33 0.101 23.20 10 0.74 0.226 10.30 20 1.06 0.322 7.22 30 1.30 0.395 5.89 50 1.68 0.514 4.55 88 2.25 0.687 3.40 100 2.41 0.734 3.18 108 2.51 0.764 3.05 150 2.98 0.907 2.57 174 3.22 0.98 2.38 200 3.46 1.05 2.21 300 4.29 1.31 1.79 400 5.00 1.52 1.53 450 1 5.32 1.62 1.44 ' I Attenuation at 20 C (68 F) cable\ temIperature; tolerance +1-5% max.; Mean power rating at 40°C (104°F) ambient tempure FREQUENCY MHz Attenuation dB/100m dB/lOOft Power kW 2000 12.20 3.71 0.634 2100 12.50 3.81 0.619 2200 12.80 3.92 0.605 2300 13.20 4.02 0.587 2400 13.50 4.12 0.574 2500 13.80 4.22 0.562 2600 1420 4.31 0.546 2700 14.50 4.41 0.535 3000 15.40 4.69 0.505 3500 1690 5.14 0.461 3600 17.10 5.22 0.456 4000 18.30 5.56 0.427 4500 19.60 597 0.399 5000 20.90 6.36 0.376 5500 22.10 6.74 0.356 6000 23.30 7.11 0.339 ~_j FREQUENCY MHz Attenuation dB/100m dB/lOOft Power kW 500 5.63 1.72 1.36 512 5.71 1.74 1.34 600 6.22 1.90 1.23 700 6.76 2.06 1.14 750 7.02 2.14 1.09 800 7.28 2.22 1.06 824 7.40 2.25 1.04 894 7.74 2.36 0.993 900 7.76 2.37 0.99 925 7.88 2.40 0.976 960 8.05 2.45 0.955 1000 8.23 2.51 0.934 1250 9.32 2.84 0.826 1400 9.93 3.03 0.776 1500 10.30 3.15 0.749 1700 11.10 3.38 0.695 1800 1150 3.49 0.671 MEN TESTING AND ENVIRONMENTAL fire Performance Flame Retardant, Plenum-rated, CMP Regulatory Compliance NEC Article 800 Communication Circuits ETL Listed to UL444 Canadian CSA C.22.2/FT6 Installation Temperature -20 to 60 (-4 to 140) °C(°F) Storage Temperature -40 to 85 (-40 to 1 85) °C(OF) Operation Temperature -40 to 85 (-40 to 1 85) °C(°F) SmartGuard is classified as a metal raceway alternative. Per NFPA 72, 2019, section 12.4.2 Pathway Survivability Level 1. Pathway survivability Level 1 shall consist of pathways in buildings that are fully protected by an,automatic sprinkler system YL,ordance 'ith NFPA1 3 with any interconnecting conductors, cables, or other physical pathways protected by metal raceways or metol'arm&ed cables. L_- -, I . L Per NFPA 72, 2016, 12.4.2 Pathway Survivability Level 1. IT L - Pathway survivability Level 1 shall consist of pathways in buildings that are fully protected by an automatic sprinkler system in accordance with NFPA.\3,f with any interconnecting conductors, cables, or other physical pathways installed metilacewoys. r Per NFPA 72, 2013, 12.4.2 Pathway Survivability Level 1. \~ewithPathway survivability Level 1 shall consist of pathwoys in buildings that are Ful protected iy an automatic sp jnlJer sys/em in accorda{r 1'1FPA Standard for the Installation of Sprinkler Systems, with any interconnecting corduct,rs cables orother physical pathwys installed in metal raewoYs.i Per NFPA 70, 2014, Raceway is defined as follows: \ \ / / \ Raceway. An enclosed channel of metallic or nonmetallic materials designed especially for holding wires, cables, or, busbars,V'ith alditional functions as permitted in this code. -. - Per NFPA 70, 2014 \ -1 Section 348.2 Definition. . - - Flexible Metal Conduit (FMC). A raceway of circular cross section made of helicdlly wound, formed, interlocked metal strip. PRODUCT DATASHEET RADIO FREQUENCY SYSTEMS V1EJ cAl2-5oJPL The Clear Choice 1/2" ClearFillOLine Plenum-RatedWAir-Dielectric Coaxial tCabletfor li Building Applications ClearFill®Line 112' low loss air dielectric cable, Plenum-rated, C1413 FEATURES/BENEFITS (j Supports Multiple RF Signals ® Complete Shielding The solid outer conductor of the ClearFillIfilLine coaxial cable creates a continuous RFI/EMI shield that minimizes system interference. ® Outstanding Intermodulation Performance RFS coaxial cable's solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory. 1/2" Plenum-Rated In-Building Cable Wide Range of Applications Typical areas of application are feedlines for plenum-space installations within occupied buildings or structures but also suitable for outdoor use due to jacket UV rating. Technical Features APPLICATIONS 'Applications j Suitable for plenum in-building/public safety or outdoor usage STRUCTURE Cable Type Air-Dielectric, Corrugated 1/2" Size mm (in) 4.8(0.19) Copper-Clad Aluminum Wire !Inner Conductor mm (in) 11.8 (0.464) Extruded Polyethylene Dielectric mm (in) 13.8 (0.54) Corrugated Copper Outer Conductor Jacket mm 'iii' 15.93 (0.627) Plenum Rated / Color Blue UV rated to ASTM G155 ELECTRICAL SPECIFICATIONS 'Impedance 0 50 +/-1 Maximum Frequency GHz 6.0 Velocity % 91.0 pF/m (pF/ft) 76 (23.2) Capacitance p1-t/m (pH/fl) 0.19 (0.058) Inductance kW 40.0 Peak Power Rating RF Peak Voltage Volts 2000.0 Volt RMS 8000.0 Jacket Spark linner Conductor dc Resistance 0/1000 m (0/1000 6) 1,48 (0.45) 0/1000 m (0/1000 /t) 1.9(0.58) Outer Conductor do Resistance 24.3 (1.13) @698-960 MHz Return Loss (VSWR) Performance 24.3(1.13) @ 1700-2155 MHz 18 1.29 4400-5900 MHz dB (VSWR) 19(1.25) in other specified bands Maximum Return Loss !Temperature & Power High Power Rating MECHANICAL SPECIFICATIONS Cable Weight kg/m (lb/fl) 0.37 (0.25) Minimum Bending Radius, Single Bend mm (in) 125(5) Minimum Bending Radius, Repeated Bends mm (in) 254 (10) IBending Moment Nm (lb*ft) 4.1 Tensile Strength N (lb) 1112(250) !Recommended l Maximum Clamp Spacing m(ft) 0.5/0.9(1.8/3) ICA12-50JPL REV: I REV DATE: 3.Oct.2017 www.rfsworld,com All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 2 S Frequency MHz Attenuation dB!loom dB!100ft Power kW 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 750 800 824 894 900 925 960 1000 1250 1400 1500 1700 1800 2000 2100 2200 2300 2400 2500 2600 2700 3000 3500 3600 4000 4500 5000 5500 6000 0.15 0.045 40.00 0.21 0.064 34.30 0.26 0.079 27.90 0.30 0.091 24.20 0.67 0.204 10.70 0.95 0.291 7.55 1.17 0.358 6.15 1.52 0.465 4.74 2.04 0.622 3.53 2.18 0.665 3.30 2.27 0.692 3.17 2.70 0.822 2.67 2.92 0.889 2.47 3.14 0.957 2.30 3.89 1.19 1.85 4.54 1.39 1.59 4.84 1.48 1.49 5.13 1.56 1.41 5.19 1.58 1.39 5.66 1.73 1.28 6.16 1.88 1.17 6.40 1.95 1.13 6.64 2.02 1.09 6.75 2.06 1.07 7.06 2.15 1.02 7.08 2.16 1.02 7.19 2.19 1.01 7.34 2.24 0.986 7.51 2.29 0.964 8.52 2.60 0.851 9.08 2.77 0.799 9.45 2.88 0.768 10.20 3.09 0.713 10.50 3.20 0.693 11.20 3.40 0.65 11.50 3.50 0.633 11.80 3.59 0.618 12.10 3.69 0.603 12.40 3.78 0.588 12.70 3.87 0.575 13.00 3.96 0.562 13.30 4.05 0.549 14.10 4.31 0.519 15.50 4.73 0.474 15.80 4.81 0.465 16.80 5.13 0.438 18.10 5.51 0.408 19.30 5.88 0.383 20.40 6.23 0.364 21.60 6.58 0.344 0 TESTING AND ENVIRONMENTAL "Fire Performance IFlame Retardant, Plenum Rated Flame Retardant Jacket Specifications Meets/Exceeds Steiner Tunnel Test Method UL 910, NEC 820 53 (a) CMP,NFPA262.' Regulatory Compliance NEC Article 800 Communication Circuits ETL Listed to UL444 Canadian CSA C.22.2/lT6 'Installation Temperature -20 to 60 (4 to 140) °C(°F) Storage Temperature -40 to 85 (40 to 185) °C(°F) Operation Temperature 140 to 85 (40 to 185) °C(°F) PRODUCT DATASHEET RADIO FREQUENCY SYSTEMS 9-W 1CA12-50JPL The Clear Choice ATTENUATION AND POWER RATING Attenuation at 20°C (68°F) cable temperature; tolerance +1- 5% max.; Mean power rating at 40°C (104°F) ambient temperature External Document Links Notes OL ICA12-50JPL REV: I REV DATE: 3.Oct.2017 www.rfsworId.com All values nominal unless tolerances provided; infomiaton contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 2 'C-6-UW-N-AI6' S (6 dB, Air Directional Coupler, 5556OOO MHz' Product Classification Product Type Directional coupler General Specifications Device Type Coupler Application Indoor/Outdoor Color White Inner Contact Plating Silver Interface N Female Outer Contact Plating Trimetal Dimensions Height 23 mm 0.906 in Width 70 mm 2.756 in Length 156 mm I 6.142 in Electrical Specifications 3rd Order IMD -163 dBc 3rd Order IMD Test Method Two +43 dBm carriers Insertion Loss at Frequency Band 1.8 dB © 555-6000 MHz Average Power, maximum 200 W Coupling 6dB Coupling Tolerance ±1.1dB Impedance 50 ohm Isolation at Frequency Band 18 dB © 4900-6000 MHz I 22 dB © 3800-4900 MHz I 24 dB © 2700-3800 MHz 1 26 dB @ 555-2700 MHz Page 1 of 2 S -6-UW-N-1\I6 Operating Frequency Band 555 - 6000 MHz Peak Power, maximum 1 kW Reflected Power, maximum 40 W VSWR at Frequency Band 1.25:1 @ 2700-3800 MHz 1 1.2:1 @ 555-2700 MHz 1 1.3:1 © 3800-6000 MHz Mechanical Specifications Coupling Nut Proof Torque 4.5 N-rn 1 39.828 in lb Environmental Specifications Operating Temperature Relative Humidity Corrosion Test Method Ingress Protection Test Method Packaging and Weights Height, packed Width, packed Wength,packed Weight, gross Weight, net -35°C to +85 °C 01 OF to +185 °F) Up to 100% IEC 60068-2-11, 30 days fEC 60529:2001, IP67 45 mm 1.772 in 98 mm 3.858 in 180 mm I 7.087 in 0.42 kg I 0.926 lb 0.36 kg I 0.794 lb Regulatortj Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system 'so 9001:2015 Page 2 of 2 (C-10-U W-N-I6 - - . 110 dB, Air Directional Cbupler,556000 MH Product Classification Product Type Directional coupler Genera) Specifications Device Type Coupler Application Indoor/Outdoor Color White Inner Contact Plating Silver Interface N Female Outer Contact Plating Trimetal Dimensions Height 22 mm 0.866 in Width 72 mm 2.835 in Length 159 mm 6.26 in Electrical Specifications 3rd Order IMD -163 dBc 3rd Order IMD Test Method Two +43 dBm carriers Insertion Loss at Frequency Band 0.8 dB @ 555-6000 MHz Average Power, maximum 200 W Coupling 10 dB Coupling Tolerance ±1.2dB Impedance 50 ohm Isolation at Frequency Band 26 dB @ 3800-4900 MHz I 26 dB @ 4900-6000 MHz I 28 dB © 2700-3800 MHz 1 30dB©555-2700MHz Page 1 of 2 10-U W-N-A16 Operating Frequency Band 555 - 6000 MHz Peak Power, maximum 1 kW Reflected Power, maximum 100W VSWR at Frequency Band 1.25:1 © 2700-3800 MHz 1 1.2:1 © 555-2700 MHz 1 1.3:1 © 3800-6000 MHz Mechanical Specifications Coupling Nut Proof Torque 4.5 N-rn 1 39.828 in lb Environmental Specifications Operating Temperature Relative Humidity Corrosion Test Method Ingress Protection Test Method Packaging and Weights Height, packed Width, packed Wength, packed Weight, gross Weight, net -35 °C to +85 °C (-31 OF to +185 °F) Up to 100% IEC 60068-2-11, 30 days IEC 60529:2001, IP67 45 mm 1.772 in 98 mm 3.858 in 180 mm I 7.087 in 0.44 kg I 0.97 lb 0.38 kg 0.838 lb Regulatortj Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system ISO 9001:2015 Page 2 of 2 "S-2-CPUSE-L-N (jwo-waij Low Power Splitter, 555-2700tH Product Classification Product Type Coaxial splitter General Specifications Device Type Splitter Application Indoor/Outdoor Color Black Inner Contact Plating Silver Interface N Female Outer Contact Plating Trimetal Dimensions Height 22 mm I 0.866 in Width 79 mm 3.11 in Length 107 mm 4.213 in Electrical Specifications 3rd Order IMD -130 dBc 3rd Order IMD Test Method Two +43 dBm carriers Insertion Loss at Frequency Band 0.3 dB @ 555-960 MHz 0.4 dB @ 1710-2700 MHz Average Power, maximum 80 W Impedance 50 ohm Isolation at Frequency Band 17 dB © 555-698 MHz I 20 dB © 698-2700 MHz Operating Frequency Band 555 - 2700 MHz Peak Power, maximum 1 kW Power Rating, combining 0.5 W Page 1 of 2 -2-CPUSE-L-N Power Rating, Splitting 80W Reflected Power, maximum 3W Split Loss 3 dB VSWR at Frequency Band 1.2:1 @698-2700 MHz 1 1.43:1 © 555-698 MHz Environmental Specifications Operating Temperature Relative Humidity Ingress Protection Test Method Packaging and Weights Height, packed Width, packed Length, packed -25 °C to +85 °C 03 OF to +185 °F) Up to 100% IEC 60529:2001, IP65 40 mm 1 1.5751n 100 mm I 3.937 in 130mm I 5.118in Volume 520000 mm' 1 31.732 in3 Weight, gross 0.29 kg I 0.639 lb Weight, net 0.24 kg I 0.529 lb Regulatortj Compliance/Certifications Agency Classification CHINA-ROHS Below maximum concentration value ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance ROHS Compliant 4 ISO ~ej 9001:2015 Page 2 of 2 DESCRIPTION N Male Connector for 1/2 Coaxial Cable, OMNI Fir standard, extended frequency range OMNI FiT high performance connectors are disiged for use with both CELLFLEX® (copper) and CELIFLEX® Lite (aluminum) cables. They are designed specifically to provide the highest quality connectorcoble interface while simplifying and speeding up connector attachment. All RFS connect6rs are full tested for mechanical and electrical compliance to industry specifications. FEATURES/BENEFITS Cost effective two-piece design for safe and easy installation. Compatible with copper and aluminiu able types\i.. one connector for outer conductor materials eliminates the risk of faulty connectorinställtion and helps to keep inventory down.. .I ~ \ Robust mechanical design for low and consistent intdrmodulation.performance i.e. keeps the mobile network performance up reduces the nunbèr of droped calls and avoids revnue losses. V,enUe Superior electrical performance for consistent and repeatable VSWR network system performance. owntime risk, secures revenu\ \ \ Waterproof to I!68 i.e. nod I e. RoHS (EU) ard CRoHS (China) ompiirt i.e. can be useilll on a global bsi \ r TECHNICAL FEATURES GENERAL SPECIFICATIONS Transmission Line Type ,_-. 7 Coaxial Cable I Cable Size r j / 1'/2" \ \ I Cable Type I \ I / 7 Focm Dieletric, ,Radiating Model Series \ / [ / LCF1250 Series 1CA1250 Series Con'nector Interface \ ! N \ \' Connctor,Type \ \ / I \ \ OMNI FIT' PREMIUM Straight / SealingMethod I \ \' ...-' 0-ring Gender I Male ELECTRICAL SPECIFICATIONS Noninal Impedance \ ..j 0hm...— 50 3rd Order IM Product@ 2x20 Watts - _dBc 159 typical r-1 fl Maximum Frequen4' - GHz 6 - VSWR, Return loss VSWR (dB) 0 < 11.0 GHz: 1.03 (36.6) 7 GHz: : 3.7<16.0 GHz: 1.08 (28.0) r MECHANICAL SPECIFICATIONS Plating Outer/Inner Trimetal/Silver . Length mm (in) 58.7 (2.31) , Outer Diameter mm (in) 25.9(1) Weight kg (lb) 0.12 (0.26) Inner Contact Attachment Basket I - , - I Outer Contact Attachment Spring C.Ring - - ACCESSORIES Wrench size front mm (in 24 (15/16) - - r \ Wrench size rear mm (in) 24 (15/16) .J \ \ ! \ Trimming Tool TRIM-SET-L1 2-0O2 r TESTING AND ENVIRONMENTAL Waterproof Level IP68 PRODUCT DATASHEET NM-LCFI2-0O3 RADIO FREQUENCY SYSTEMS Q 01 The Clear Choice O C N Male Connector for 1/2" Coaxial Cable, OMNI FIT TIM standard, O-ring sealing OMNI FIT high performance connectors are designed for use with both CELLFLEX® (copper) and CELLFLEX® Lite (aluminum) cables. They are designed specifically to provide the highest quality connector- cable interface while simplifying and speeding up connector attachment. FEATURES (BENEFITS ® Cost effective two-piece design for safe and easy installation J Compatible with copper and aluminium cable types i.e. one connector for both outer conductor materials eliminates the risk of faulty connector installation and helps to keep inventory down ® Robust mechanical design for low and consistent intermodulation performance i.e. keeps the mobile network NM-LCF12-CO3 performance up reduces the number of dropped calls and avoids revenue losses € Superior electrical performance for consistent and repeatable VSWR i.e. ensure network system performance Waterproof to IP 68 i.e. no downtime risk, secures revenue RoHS (EU) and CR0HS (China) compliant i.e. can be used on a global basis Technical Features GENERAL SPECIFICATIONS Transmission Line Type Coaxial Cable 112 1CabIe Size Foam DielectriciRadiating Cable Type LCF12-50 SeriesIlCA12-50 SeriesIRCF12-50 Series Model Series N Connector Interface Connector Type OMNI FIT°'1 Standard 0-ring Sealing Method Male Gender ELECTRICAL SPECIFICATIONS Nominal Impedance Ohm 50 dBc -157 typical -160 3rd Order IM Product @ 2x20 Watts GHz 6.0 Maximum Frequency VSWR(dB) 0< f5 1.0 GHz: 1.03 (36.6) !VSWR, Return Loss 1.0< f5 2.7 GHz: 1.04 (34.1) 2.7 <f5 3.7 GHz: 1.08 (28.3) 3.7 <f5 5.0 GHz: 1.15 (23.1) 5.0< f:5 6.0 GHz: 1.25 (19.1) MECHANICAL SPECIFICATIONS 'Plating Outer/Inner Trimetal/Silver mm (in) 56.5 (2.23) Length mm (in) 22(0.87) Outer Diameter kg (lb) 0.077 (0.17) Weight Spring Finger Inner Contact Attachment Spring C-Ring Outer Contact Attachment ACCESSORIES Wrench size front 1 mm (in) 20(13/16) mm (in) 20(13/16) size rear :Wrench TRIM-SET-1.12-0O2 Trimming Tool TESTING AND ENVIRONMENTAL Waterproof Level NM-LCFI2-0O3 REV: B All information contained in the present datastreet is subject to confirmation at time of ordering REV DATE: 07.Oct.2018 Page 1 of 2 QUESTIONS? VISIT WWW.TAILEYCOM.COM OR CONTACT TALLEY AT 800.949.1079 OR SALES@TALLEYCOM.COM TODAY. Yoo conneo the Wothd. We we II PRODUCT DATASHEET NM-LCFI 2-0O3 RADIO FREQUENCY SYSTEMS The Clear Choice° NM-LCFI2-0O3 Outline Drawing External Document Links I Notes Installation Instruction S NM-LCFI 2-0O3 REV: B REV DATE: 07.Oct.2018 J www.rfsworId.com S All information contained in the present datasheet is subject to confirmation at time of ordering QUESTIONS? VISIT WWW.TALIEYCOM.COM OR CONTACT TAILEY AT 800.949.7079 OR SALES@TALLEYCOM.COM TODAY Page 2 of 1ALLE YOU Connect the WoOd We Make It Easy. (CELLMPX-O-CPUSE Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees VSWR I Return Loss, dB Input Power per Port, maximum, watts Polarization Impedance CellMaxTM Omni In-building Antenna, 98-960 MHzand 1710-2700 MHz . This product is part of the CommScope Wired for Wireless® Solution 698-800 800-960 1710-2700 2.0 2.0 5.0 360 360 360 1.8110.9 1.51 14.0 1.5 114.0 50 50 50 Vertical Vertical Vertical 50 ohm 50 ohm 50 ohm Product Classification Brand CellMaxTM Product Type In-building antenna General Specifications Antenna Type Omni Application Indoor Operating Frequency Band 1710-2700 MHz I 698-960 MHz Mount Type Thru-hole ceiling mount (optional) Package Quantity 1 Pigtail Cable KSR195, plenum rated Mechanical Specifications Color White Pigtail Length 315.0 mm 1 12.4 in Radome Material ABS RF Connector Interface N Female Environmental Specifications Operating Temperature -40 °C to +60 °C (-40 IF to +140 °F) Relative Humidity Up to 100% Dimensions page 1 of 4 September 25, 2019 CELLMAX-U-CPUSE Height 85.00 mm 3.35 in Outer Diameter 186.0 mm I 7.3 in Net Weight 0.3 kg 1 0.7 lb Packed Dimensions Height 135.00 mm 5.31 in Length 195.0 mm I 7.7 in Width 195.0 mm I 7.7 in Shipping Weight 0.4 kg I 0.9 lb S paqe 2 of 4 go CELLMPX-O-CPUSE *Outline Drawing Regulatorç,j Compliance/Certifications Agency Classification RoHS 2011/65/EU ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system page 3 of 4 September 25, 2019 CELLMAX-O-CPUSE paqe 4 of 4 i .x S 10746-896 MHz Yagi Antenna,(11 dBi) Model Numbers (csl-Av/746-896/11 Frequency Range 746-896 MHz Features & Benefits 11 dBi Gain 8 Elements Hermetically Sealed Driven Element Rugged Lightweight Design Stainless Steel Hardware Broad Bandwidth 746-896 MHz Yagi Antenna, 11 dBi Radiation Patterns Vertical Horizontal Electrical Specifications Gain 11. dBi VSWR <1.7:1 Horizontal Beamwidth 48° Vertical Beamwidth 42° Polarization Vertical Maximum Input Power 100 Wafts Electrical Downtilt 0° Front-back Ratio >16 dB Mechanical Specifications Number of Elements 8 Connector N-Female Lightning Protection Direct Ground Rated Wind Speed 134 mph (200 kph) Dimensions 33.1 x 8 x 2.2 in Antenna Weight 1.76 lbs Mounting Hardware U-Bolt Included Mounting Hardward Fits 17/8" OD Pipe Specifications subject to change without notice. 4 fool~ .WESTELL Copyright © 2015 by Westell. Inc. All Rights Reserved. Westell. CIearLnk. Keritrox. and Optima WESTELL.cOM Management System are registered trademarks of Westell, Inc. All other names are trademarks of their respective owners. Information is correct at time of printing and is subject to change without notice. Westell. Inc. is an Equal Opportunity/Affirmative Action employer. 030-200218 rA 01/12/15 ISO 9001 Certified Lightning and Surge Protection for The 21st CenturyTM The Times ProtectTM LP-BTR high performance surge .arrestor series addresses applications in the 20MHz-I 000MHz spectrum. Our unique DC blocking technology employed in this design pro- vides optimum isolation of the antenna port from the protected equipment port for maximum surge protection. LP-BTR surge protectors have exceptional RF performance and are constructed from the highest quality materials for unsurpassed duraDility and longevity. These units meet and surpass all applicable iidustry standards. The LP-BTR product family is available with N connector configurations to satisfy various installation requirements. LP-BTR Series: LP-BTR-NFF N Female connectors on surge and protected sides LP-BTR-NMP N Male connector on protected side with N Female coinector on surge side LP-BTR-NMS N Male connector on surge side with N Female connector on protected side LP-BTR-NFF 20-1000MHz DC Blocked N Type F/F LP-BTR-NMS 20-1000MHz DC Blocked N Type M on Surge *All dimensions shown in inches LPBTR-NMP. 20-1000MHz DC Blocked N Type M on Protected Thw-ProtectTM wmtians Electrical Specifications Impedance 500 Frequency Range 20-1000 MHz VSWR/Return Loss <1.1:1 / <-26dB Insertion Loss <0.1dB Impulse Discharge Current 10KA multiple (8x20ps wave-form) Turn-on Voltage 600V ± 20% Turn-on Time 2.5ns for 2kV/ns Energy Throughput Rating <2ciJ (4kV12ki\ 1 .2)50/8x20ps wave-form) Power Handling at Frequency 375W (20-220MHZ) 125W (220-700MHz) 50W (700-1000MHZ) Protection Circuit DC Blocked Temp Range Storage/Operating Mechanical / EnvironmentalSpecifications -40°C - +85°C / -40°C - +50°C Weatherization Required for external use Thermal Shock US MIL-STD 202, Meth.107,Cond.B Vibration US MIL-STD 202, Meth.204,Cond.B Shock US MIL-STD 202, Meth.213,Cond.1 RoHS Compliant Yes Mating Life Cycle > 500 Recommended Coupling Nut Torque 7t0 10 lb-in 'iniSpecificatio ns Component Material Plating Body Brass White Bronze Inner Conductor Male Brass Silver Inner Conductor Female Phosphor Bronze Silver Outer Conductor Brass White Bronze Coupling Nut Brass White Bronze Insulator PTFE -- sii TYPICAL RETURN LOSS (dB) -5.0 -10.0 -15.0 - - - -- - -20.0 -25.0 -30.0 -450 -55.0 - -650 ----,-. -75.0 Start MHz Irbw (06115 S21 TYPICAL INSERTION LOSS (dB) ---------- ••. oil i4l."I 7 TIMES U MICROWAVE SYSTEMS World Headquarters: 358 Hall Avenue, Wallingford, CT 06492 • Tel: 203-949-8400, 1-800-867-2629 • Fax: 203-949-8423 International Sales: 4 School Brae, Dysart, Kirkcaldy, Fife, Scotland KY1 2XB UK • Tel: +44(0)1592655428 China Sales: No. 318 Yuan Shan Road, Shanghai 201108 China • Tel: 86-21-51761234 • Fax: 86-21-64424098 www.timesmicrowave.com © 2010, Times Microwave systems, Wallingford, CT 06492 LP-BTR-2 9/10 l'lLlI\1-rcINE I flPI I II'.] The FRM mount is a lightweight mount and is galvanized for corrosion protection. The FRM mount is easily shipped via UPS. Order (1) optionalRMMA1(1/8"thick) or (1) optional FRMPAD (3/8" thick) for a protective barrier between the mount and the roof. Order (1) optional SCK1 50 safety cable kit (318"x 150'). 1.25" to 2.38" Mast Tube Diameters 2.5' and 5' Overall Mast Heights (See Mast Descriptions) 16" Nominal Blocks S 3' Square FRM BALLAST REQUIREMENTS MAST SPECIFICATIONS Mount Part No. Mast Part No. Mast Description & Height FRM1 25 FY202 1.25" O.D.x 16 GA. x 5.0' (PG) FRM1 50 FY203 1.50" O.D. x 16 GA. x 2.5' (PG) FRM1 66 FY204 1.66" O.D. x 16 GA. x 2.5' (PG) (FRM23 (FY205) 38O D x 0.154" wall x 25(HDG) FRM225 FY205SP 2.25"O.D.x 14 GA. x 5.0'(HDG) FRM238SP5 FY253 2.38"O.D.x 0,154" wall x 5.0' (HDG) Effective Zero Vmax at centroid of projected area, (MPH) Projected Ballast Velocity Vs Area (EPA) (LBS) Load (MPH) (fl'2) (PSF) h=2 FT h=3 FT h=4 FT h=5 FT 100 12 140 135 110 96 85 2 200 24 198 188 153 133 119 300 36 242 222 182 157 (154) 141 (131) 400 48 280 269 219(197) 190 (154) 170 (131) 100 12 99 96 78 68 60 200 24 140 133 108 94 84 300 36 171 157 129 111 99(93) 400 48 198 190 155(139) 134(109) 120(93) 100 12 81 78 64 55 49 6 200 24 114 108 88 77 68 300 36 140 128 105 91(89) 81 (76) 400 48 161 155 127(114) 110(89) 98(76) PG = Pre-galvanized most h = Distance from support surface to centroid of EPA. HDG = Hot-dip galvanized most Vs = Effective wind velocity resulting in sliding on a flat surface with a .50 coefficient of friction. Vmax = Effective wind velocity based on strength or overturning. NOTE:The velocities in ( ) apply to the FRM1 25 mount when the strength of the FRM125 mast governs. n 253 Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard 2011 tORN PRODUCTS LLC Products LIC f,-e( 93, ~'), O-R Emergency Responder Radio System Coverage Report Test Results Date Prepared: Jan 21 2021 Test Location: 5592 El Camino Real 5592 El Camino Real Carlsbad, CA 92008 Technician: Garrett Hawkins FCC#: 0028899276 Building: 5592 El Camino Real Result: Pass Number of Floors: 4 Grading Approach: By area per floor Number of Areas Tested: 80 Area Pass Criteria: 90% Number of Critical Points Tested: 8 Critical Points Pass Criteria: 99% Equipment Vendor Application Device Calibrated Date Antenna info PCTEL SeeHawk Touch SeeGull lBflex Device rel 1-29-2020 rel 2.4.0.0 3.4.0.0 SN: 081712059 Test Report Summary Channel/Group Freq (MHz) Result Areas passed (%) Critical Points passed (%) San Diego- 851 .81750, Pass 80/80(100%) 8/8(100%) Imperial County 853.33750, RCS NextGen: 854.26250, 1,2,3,4 855.88750 Floors Tested Upper Level (Level 4) Entry Level (Level 3) Lower Level (Level 2) Life Guidance (Level 1) U _ I L . iIL ( iEJ NI iNI !'4ET ;dE EL JU Jjf !4 Floor: Upper Level (Level 4) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Result: Pass Areas Tested: 20 Area Points Pass Criteria: 90% Critical Points Tested: 2 Critical Points Pass Criteria: 99% Total Grid Size: 29359.8 sqft Frequency (MHz): 851 .81750, 853.33750; 854.26250, 855.88750 Grid 02 Grid Threshold (dBm) Comments 1 -95.00 2 -95.00 Floor: Upper Level (Level 4) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Reference Point Report I Reference Point j Power (dBm) I Selected I Comment Critical Point Reoort Critical Point Threshold (dBm) Power (dBm) Loss (dB) Voice - Result Test Comment 1 -95.00 -65.57 Pass 2 -95.00 -91.63 Pass Area Renort Grid Area Power (dBm) Loss (dB) Voice Test Result Comment 1 1 -83.54 Pass 1 2 -85.53 Pass 1 3 -79.72 Pass 1 4 -76.72 Pass 1 5 -79.65 Pass 1 6 -90.01 Pass 1 7 -79.04 Pass _1_ 8 -76.51 Pass 1 9 -82.23 Pass 1 1 10 -90.79 Pass 1 11 -71.84 Pass 1 12 -93.03 Pass 1 13 -65.59 Pass 1 14 -82.98 Pass 1 15 -86.26 Pass 1 1 16 -63.86 Pass 1 17 -79.97 Pass 2 1 -78.87 Pass 2 2 1 -76.05 Pass 2 3 1 -77.80 Pass Grid 01 Grid 03 Grid 11 (NTERIOR WALL I HR. A, Floor: Entry Level (Level 3) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Result: Pass Areas Tested: 20 Area Points Pass Criteria: 90% Critical Points Tested: 2 Critical Points Pass Criteria: 99% Total Grid Size: 18651.5 sqft Frequency (MHz): 851 .81750, 853.33750, 854.26250, 855.88750 Grid Threshold (dBm) Comments 1 -95.00 2 -95.00 3 -95.00 4 -95.00 Floor: Entry Level (Level 3) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Reference Point Report Reference Point I Power (dBm) I Selected I Comment Critical Point Report Critical Point Threshold (dBm) Power (dBm) Loss (dB) Voice Result Test Comment 2 -95.00 -66.90 Pass 3 -95.00 -93.07 Pass Area Report Grid Area Power (dBm) Loss (dB) Voice Test Result Comment 1 - 1 -63.46 Pass 1 - 2 -80.38 Pass 1 3 -86.11 Pass 1 - 4 -84.22 Pass 1 - 5 -62.64 Pass 1 - 6 -75.03 Pass 1 7 -73.16 Pass 1 8 -77.98 Pass 2 1 -65.20 Pass 2 2 -90.53 Pass 2 3 -88.08 Pass 2 4 -81.01 Pass 2 5 -84.41 Pass 2 6 -93.47 Pass 2 7 -61.75 Pass 2 8 -91.03 Pass 3 1 -81.32 Pass 3 _2_ -94.18 Pass 4 1 -81.47 Pass 4 2 -87.36 Pass Floor: Lower Level (Level 2) Group: San Diego-Imperial County RCS NextGen Channels: 1, 21 31 4 Result: Pass Areas Tested: 20 Area Points Pass Criteria: 90% Critical Points Tested: 3 Critical Points Pass Criteria: 99% Total Grid Size: 18959.6 sqft Frequency (MHz): 851 .81750, 853.33750, 854.26250, 855.88750 3 J rid 06 Grid 01 Grid 03 2 - Gn (-901, __ I Grid 04 4 Li : -I l T Grid 05 -.I-.... Grid 02 T l 2 I' , Q.9 cI -71 r 6 ,(377, WTEJOR WALL I HR. WVT,b#alAhotfrSr, I Grid Threshold (dBm) Comments 1 -95.00 2 -95.00 3 -95.00 4 1 -95.00 5 -95.00 6 -95.00 Floor: Lower Level (Level 2) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Reference Point Report I Reference Point j Power (dBm) I Selected j Comment Critical Point Report Critical Point Threshold (dBm) Power (dBm) Loss (dB) Voice Result Test Comment 2 -95.00 -56.76 Pass 3 -95.00 -84.34 Pass 4 -95.00 -89.34 Pass Area Report Grid Area Power (dBm) Loss (dB) Voice Test Result Comment 1 1 -89.89 Pass 1 2 -85.46 Pass 1 3 -54.31 Pass 1 4 -90.98 Pass 1 5 -84.34 Pass 1 6 -87.80 Pass 1 7 -53.68 Pass 1 8 -75.25 Pass 2 1 -86.04 Pass 2 1 2 -90.03 Pass 2 3 -92.98 Pass 2 4 -90.51 Pass 2 5 -70.39 Pass 2 6 -58.23 Pass 2 7 -76.23 Pass 2 1 8 -77.54 Pass 3 1 - -69.22 Pass 4 1 - -86.03 Pass 5 1 - -66.72 Pass 6 1 -94.15 1 Pass Id Floor: Life Guidance (Level 1) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Result: Pass Areas Tested: 20 Area Points Pass Criteria: 90% Critical Points Tested: I Critical Points Pass Criteria: 99% Total Grid Size: 20513.3 sqft Frequency (MHz): 851 .81750, 853.33750, 854.26250, 855.88750 Grid Threshold (dBm) Comments 4 -95.00 5 -95.00 6 -95.00 7 -95.00 Floor: Life Guidance (Level 1) Group: San Diego-Imperial County RCS NextGen Channels: 1,2,3,4 Reference Point Report Reference Point I Power (dBm) I Selected I Comment Critical Point Report Critical Point Threshold (dBm) Power (dBm) Loss (dB) Voice Result Test Comment 2 -95.00 1 -72.97 Pass Area Report Grid Area Power (dBm) Loss (dB) Voice Test Result Comment 4 1 -61.09 Pass 4 2 -78.03 Pass 4 3 -62.71 Pass 4 4 -92.58 Pass 4 1 5 -71.60 Pass 4 6 -83.40 Pass 4 7 -75.53 Pass 5 1 -63.02 Pass 5 2 -79.45 Pass 5 3 -52.44 Pass 5 4 -67.02 Pass 5 5 -91.05 Pass 5 6 -62.89 Pass 5 7 -54.35 Pass 6 1 -84.60 Pass 6 2 -63.95 Pass 6 3 -62.86 Pass 6 4 -57.46 Pass 7 1 1 -85.06 1 Pass 7 2 1 -88.12 1 Pass