HomeMy WebLinkAbout6195 EL CAMINO REAL; ; FPC2019-0131; Permit13T:I11 •] I
Cr'city of
Carlsbad
Print Date: 03/30/2022 Permit No: FPC2019-0131
Job Address: 6195 EL CAMINO REAL, CARLSBAD, CA 92009-1602 Status: Closed - Finaled
Permit Type: FIRE-Construction Commercial Work Class: Fire Alarm
Parcel #: 2131001800 Track 1*: Applied: 06/10/2019
Valuation: $0.00 Lot #: Issued: 06/18/2019
Occupancy Group: Project #: Finaled Close Out: 09/26/2019
#of Dwelling Units: Plan #:
Bedrooms: Construction Type:
Bathrooms: Orig. Plan Check #: Inspector:
Plan Check#: Final Inspection:
Project Title:
Description: MILLIPORE -FIRE ALARM TI
Applicant:
SIEMENS
CHRIS BISCHEL
10100 WILLOW CREEK RD
SAN DIEGO, CA 92131-1636
(858) 265-9894
FEE AMOUNT
FIRE TI Fire Alarm System $620.00
Total Fees: $620.00 Total Payments To Date: $620.00 Balance Due: $0.00
Fire Department Page 1 of 1
1635 Faraday Avenue, Carlsbad CA 92008-7314 1 760-602-4665 760-602-8561 f I www.carlsbadca.gov
SIEMENS
Industry, Inc.
I Product Submittals
Fire Alarm System
10100 Willow Creek Rd
San Diego, Ca 92131
Phone: 858-880-2085
Fax: 855-866-7942
' •-
SAFC 6195
MILPORE SMOKE DETECTOR ADD
6195 EL CAMINO REAL
CARLSBAD, CA 92009
FPC20I9-0131
6195 EL CAMINO REAL
MILLIPORE - FIRE ALARM TI
2131001800
6/1012019
FPC20I9-0131
SIEMENS Data Sheet
Fire Safety Products
Desigo' Fire Safety System
50-Point Addressable Fire Alarm Control Panel
Model FC2005
ARCHITECT AND ENGINEER SPECIFICATIC
Fire alarm control panel (FACP) for up to 50 addressable points
that is comprised of the following three (3) system components:
Main board (Model FCM901-U2)
6.5 Amps (170-Watt) power supply (Model FP201 1-Ui)
System enclosure (Model FH901-U2 I 112)
System features:
Supports 50 addressable devices on one (1) 'Class A' or two (2) 'Class B' circuits
Includes one (1) 'Class A', or two (2) 'Class B' notification appliance circuits
Supports Carbon Monoxide (CO) detection
Built-in digital alarm communication transmitter (DACT)
Built-in RS-485 connection for remote annunciators
Supervised remote printer via Desigo's Model FCA2018-U1
Downloads, prints system-event history & detector sensitivity A
Resettable and non-resettable 24VDC auxiliary power • i-upi.anum
for manu Optional connectivity to a leased-line I city-tie module
Off-normal warning message prior to reset • ®UL 864 9th Edition Listed;
Fast and easy set-up with custom-configuration tool FM, CSFM & NYC Fire Department Approved;
Supports a 182-character display City of Chicago, Class 1 Approval
Product Overview
Model FC2005 is an intelligent FACP that provides a
cost-effective, feature-rich solution for small fire-
alarm system applications.
Small and compact in design, Model FC2005 is ideal
for small fire-protection applications using less than
50 addressable devices:
Retail outlets I strip malls • doctors' offices
Dry-cleaner shops . restaurants, etc.
With its built-in DACT and two (2) NACs, Model
FC2005 is powerful enough to economically meet
the needs of these applications. Each 50-point FACP
has City of Chicago, Class I Approval, as well as
being FM (43010); CSFM (471650067:0259) and
FDNY (06104) Approved.
Specifications
The Model FC2005 FACP consists of a main board
(Model FCM901-U2); a 170-Watt power supply
(Model FP2011-U1), and a Model FH901-U2 I R2
system enclosure. The programming software for
Model FC2005 is held in flash electrically erasable
programmable read-only memory (EEPROM).
Main Board
The Model FCM901-U2 main board provides system
display and control, as well as connections for
system field wiring, via removable terminal blocks.
The 3.5-inch (8.9 centimeters) by 1.5" (3.8
centimeters) liquid-crystal display (LCD) screen
shows all system messages and event status. Each
screen supports 182 characters: seven (7) lines
with 26 characters per line. Each event may have
a custom message up to 40 characters that
describes the event's location.
The backlit LCD screen illuminates on any system
event or manual key press. New, 'unacknowledged'
events are indicated by a flashing exclamation point
('F). Once 'acknowledged,' the exclamation point
changes to a check mark ('i'). A system-status line
shows the quantity of events presently active.
Since Model FC2005 contains a built-in RS-485
communication bus on the main board, Model
FCM901-tJ2 main boards readily supports system-
status light-emitting diodes (LEDs) for Power, Alarm,
Trouble, Supervisory and Ground-Fault commands.
Feature-rich solution for Desigo 50-pt. addressable FACPs 6813
SIEMENS Industry, Inc.
Building Technologies Division
Specifications
Main Board -(continued)
There are also LEDs to indicate when audible circuits
are 'active' or 'silenced.' The main board supports
four (4) system-control buttons, including.
Acknowledge; Alarm Silence; Unsilence, and Reset.
The system offers an off-normal warning feature,
alerting users when active devices are not ready for
reset. These active devices may include manual
stations that have not been reset; smoke detectors
with smoke remaining in the optical chamber, etc.
Additionally, the main board supports an
alphanumeric keypad, as well as navigation
keys, which are used for scrolling maintenance
functions and system configuration.
The main board supports connection for up to 50
addressable devices, via one (1) 'Class A', or two (2)
'Class B' circuits. The loop supports all FDnet
devices, including the Desigo Fire Safety and Model
'H'-series devices. The main board also supports
one (1) 'Class A' or two (2) 'Class B' NACs.
Each NAC supports a maximum 2.5 Amps -with 2.5
Amps, max., allowed between both NACs. Each
NAC can be set to a synchronized strobe, for horn-
strobe devices, or for audible devices. Audible
devices can be set for:
'STEADY
'ANSI Temporal 3'! 'ANSI Temporal 4'
'March Time 30/60/120 Codes'
The main board supports four (4) 'Form C' relays for
Alarm, Trouble, Supervisory and User
Programmable events. Each relay is rated at 2
Amps at 30VDC maximum, resistive. The main
board supports two (2) auxiliary 24VDC
connections. Upon system reset, one (1)
connection interrupts they power for five seconds
for use with (4) four-wire conventional detectors:
Each auxiliary-power output is 24VDC, nominal -
rated at 0.75 Amps.
The main board contains a built-in DACT (Model
FCA201 5-Ui), which provides communicatior
between Model FC2005 and with the central or
remote monitoring station. The built-in DACT
supports two (2) separate programmable accounts.
as well as two (2) connections to the public-
switched telephone network. The connections
support RJ31X male connectors.
(For compatibility with each Model FC2005 FACP,
see the Central Station Receiver Compatibility Table
on the last page of this data-sheet document.)
SIEMENS Industry, Inc.
Building Technologies Division
The main board contains a battery-charging circuit,
providing connection to lead-acid batteries rated at
24VDC, nominal. The main board can charge up to
1 8AH batteries.
The main board also cortains a universal serial bus
(USB) connector that supports connection for
system configuration and module firmware upload,
via the custom-configura:ion tool.
Model FC2005 can be configured using the
custom-configuration tool or manually from the
alphanumeric keypad on the main board. An auto-
configuration feature :reates a basic system
configuration of all connected devices to
accelerate initial system commissioning.
50-Point Power Supply
The Model FCM901-U2 main board also supports
connection to the system power supply. The 6.5
Amps (170-Watt) power supply, Model FP2011-U1,
incorporates a 4.OA, non-resettable slow-blow fuse
on the primary input. It also includes a built-in AC-
line filter for surge and noise suppression. Model
FP201 i-Ui mounts in a standard Sierrens - Fire
Safety enclosure, and there are no serviceable
Siemens - Fire Safety parts to be maintained.
50-Point System Enclosure
The Model FH901-U2 I R2 enclosure for the Model
FC2005 FACP is available in either black or red, and
supports all system modules. The enclosure also
supports 1 2A batteries.
Note: For systems requiring larger than 12AH
batteries, use a ®LJL Listed battery box.
The Model FH901-U2 I R2 enclosure for the 50-point
panel is comprised of a dual-mounting setup that
allows the main board to be partially mounted in a
lower-to-upper position. When temporarily installed
in the lower position, technicians are allowed more
space to install field wiring at the time of system set-
up. When field-wiring installation is complete, the
main board shall be moved to the upper position for
standard mounting prior to applying system power.
Additionally, the enclosure supports an optional
battery bracket (Model FHA901-Ui) that can be
used to secure batteries up to 12AH. Model
FHA901-U1 is required to comply with seismic
certification, pursuant to ASC I SET 7-05, Section
13.2.2.
A flush-mount trim kit (Model FHA902-Ui I Ri)
is also available for use when flush mounting
Model FH901-U2 I R2.
—2—
-3-
Specifications - (continued)
- Optional Accessories -
Leased-Line I City-Tie Module
The Model FC2005 FACP has the capability of
operating an optional leased-line, city-tie module
(Model FC12020-U1) that provides a local-energy
output for municipal call-box connection.
A wiring harness, Model FCA901-U1, is required for
use, and must be ordered separately. The leased-
line, city-tie module is installed on the back of the
Model FC2005 FACP's main board, and all field wiring
is connected to the main board.
50-Point Remote Annunciator
The fire-system displays (FSD901-U2 I 112) are remote
LED / LCD units that show the existing status of the
Model FC2005 FACP.
The Model FSD901-U2 I R2 optional display supports
the following LEDs for system-status conditions:
Power
Alarm
Trouble
Supervisory
Ground-Fault
There are also LEDs to indicate when audible circuits
are 'active' or 'silenced.' The main board supports
four (4) system-control buttons, including:
Acknowledge; Alarm Silence; Unsilence, and Reset.
For Model FSD901-U2 I R2, a LED will illuminate for
any given Alarm, Supervisory and Trouble Desigo-
system event. A 3.5-inch (8.9 centimeters) by 1.5"
(3.8 centimeters) LCD screen will give details of the
event in alphanumeric form. The display screen can
be scrolled to reveal additional events.
The Remote Peripheral Module (FCA2018-Ui)
provides a means of connecting a Model FC2005
Desigo FACP to a parallel printer for creating a hard
copy of system-status events.
This supervised, intelligent module contains built-in
transient protection and plain-decimal addressing.
When Model PAL-1 is used with the remote
peripheral module, Model FCA2018-Ui supervises
the printer for ON, OFF Line I POWER ON I PAPER OUT
PAPERJAM, and wiring-fault conditions, as required by
UL for NFPA 72 proprietary systems.
These are the dimensions (based upon connection
to a one-height-unit enclosure) for Model FC2005:
Approximate size: 16.25"(41.3 cm.) [H];
18.13" (46 cm.) [W];
5.11" (41.3 cm.) [D]
The weight (without operating unit or batteries)
is approximately 9 pounds [4082 g].
SIEMENS Industry, Inc.
Building Technologies Division
LED Annunciator Driver: 32 Outputs 1 16 Inputs
Model FT2007-U1 serves as the main component
for allowing custom graphic annunciators to
operate on Model FC2005 FACPs. There are 16
inputs on each Model FT2007-U1 to accommodate
user-defined system commands, which include:
Reset; Silence/Unsilence; Acknowledge, and Lamp
Test. Inputs can also be programmed as
"Generic", which allows additional flexibility for
customized functionality.
Shipments of each Model FT2007-U1 driver include
two (2) PC boards [PCBs]; one (1) built-in RS-485
interface, and one (1) LED driver. Additionally, one
(1) ribbon cable is packaged, allowing connectivity
between the two (2) PCBs.
Tabular Annunciator Drivers:
16 Zones 1 32 Zones
The Tabular Annunciators allow system events sent
from Desigo 50-point addressable panels to be
displayed remotely in real-time. The Model F12008
series of tabular annunciators has 16 zones and the
Model FT2009 series uses up to 32 zones.
Additionally, no more than two (2) light-emitting
diodes (LEDs) can be used per zone.
A built-in RS-485 communication bus controls the
operation and supervision of the 16-zone and 32-
zone Tabular Annunciators, which are available in
black or red.
Temperature and Humidity Range
Model FC2005 is ®UL 864 9th Edition Listed for
indoor dry locations within a temperature range of
120 l 3°F (49 2°C) to 32 1 3°F (0 I 2°C) and a
relative humidity of 93 1 2% at a temperature of
90 /-3°F (32 /2°C).
Related Documentation
Product Data Sheet Number
Model FP2011-1-11 Power Supply 6806
Leased-Line! City-Tie Module 6810
Remote Peripheral Module 6811
50-Point Remote Annunciator 6817
LED (F12007-U1) Annunciator Driver 6824
16-Zone (FT2008-1-11) I 32-Zone
(FT2009-U1) Tabular Annunciators 6825
Central Station
Receiver Compatibility Table
The following table shows a list of central station
receivers that are compatible with the Desigo Fire
Safety 50-point addressable system, Model FC2005 -
0 i o 0
00 0 0 0 E E .-'
C .c u 0 0
Protocol w W w D1 C W 0 t ><
(I
LflDi co in M 0
SIA8 Yr Yr Yr Yr Yr Yr Yr
SIA2O Yr Yr Yr Yr Yr Yr Yr
Ademco " V, V, V, V, Contact ID "
4/2 Yr Yr Yr
3/1 Yr Yr Yr
Note: Multiple central station receivers are compatible with
the Desigo Fire Safety 50-point FACP, Model FC2005.
Although the table above illustrates central station
receivers that have been verified by Siemens with
the Model FC2005 FACP, additional receivers and
formats can also be used with each 50-point
addressable system.
After completing the installation, communication
between the Digital Alarm Communication
Transmitter (Model DACT) and Central Station
Receiver must be tested and verified.
Details for Ordering
Model Part Description Number
FCM901-U2 S54433-BiOO-Ai Desigo Main Board
{for the 50-point FACP}
FH901-U2 S54433-B103-Ai System Enclosure, Black
{for the 50-point FACP}
FH901 -R2 S544_33-B103-A2 System Enclosure, Red
{for the 50-point FACP}
FP201 i-Ui 500-450222 170-Watt Power Supply
Optional Accessories
Model Part Description Number
FCA201 8-Ui S54400-A65-Ai Remote Peripheral Module
FC12020-U1 S54400-A57-A1 Leased-Line I City-Tie Module
FCA901-Ui S54433-C1 06-Al Wiring Harness (for use on
50-point addressable panels)
FHA90 1-Ui S54433-B1 07-Al Battery Bracket
FHA902-U1 S54433-B106-A1 Flush-Mount Trim Kit, Black
FHA902-Ri S54433-B106-A2 Flush-Mount Trim Kit, Red
FSD901 -U2 S54433-Cl 02-A4 System Display, Black
{specifically for the 50-point FACP}
FSD901-R2 S54433-Cl 02-A3 System Display, Red
{specifically for the 50-point FACP}
F12007-Ui S54400-A1;42-Ai LED Annunciator Driver 132 Outputs 116 Inputs
FT2008-Ui S54400-A1143-Ai 16-Zone Tabular
Annunciator, Black
F12008-Rl S54400-A144-Al 16-Zone Tabular Annunciator, Red
F12009-Ui S54400-A1145-All 32-Zone Tabular
Annunciator, Black
FT2009-Ri S54400-A146-Ai 32-Zone Tabular Annunciator, Red
Electronics Package
Model Part
Number Description
Desigo Fire Safety Kit for the
50-Point Addressable FACP
170W power supply,
Model FP2011-U1
FC2005-L12 S54433C1103Al (Qty. 1)
Includes:
- System main board,
Model FcM901-u2
(Qty. 1)
Notice: This marketing data sheet is not intended to be used for system design or installation purposes.
For the most up-to-date information, refer to each product's installation instructions.
Fire Safety Fire Safety
8 Fernwood Road 1577 Noth Service Road
SIEMENS Industry, Inc. Florham Park, NJ 07932 East Oakville, Ontario November 2016
Building Technologies Division Tel: (973) 593-2600 (S11-FS) L6H 0H6 / Canada Supersedes sheet dated 6/2016
FAX: (908) 547-6877 Printed in U.S.A. Tel: [905] 465-8000 (6e' 14)
URL: www.USA.siemens.comlDesigo. Fire- Safeti URL: www.Siemens.cA
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. 7165-0067:0259 Page 1 of 2
CATEGORY: 7165 -- FIRE ALARM CONTROL UNIT (COMMERCIAL)
LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ
07932
Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652
Email: evelyn.esteban@siemens.com
DESIGN: Models Desigo FC2005-U2,-R2 and Cerberus Pro FC901-U3,-R3 Fire Alarm Control Units.
Non-coded; local, auxiliary, remote, proprietary and central station service; automatic or
manual waterfiow, and sprinkler supervisory service when used as a remote station
(protected premise) unit, proprietary or central station fire receiving unit. Refer to listee's data
sheet for additional detailed product description and operational considerations.
Basic components:
FH90I-U2; Desigo Enclosure (Black)
FH901-R2; Desigo Enclosure (Red)
FH90I-U3; Cerberus Pro Enclosure (Black)
FH90I-R3; Cerberus Enclosure (Red)
FHA90 1-UI; Battery Brackets, left/right
FCM901-U2; Desigo Main Board
FCM90I-U3; Cerberus Main Board
FCI2020-UI; City Tie Board (optional)
FP20II-UI; Power Supply Unit
FSD90I-U2; Desigo Remote Annunciator (Black)
FSD90I-R2; Desigo Remote Annunciator (Red)
FSD90I-U3; Cerberus Remote Annunciator (Black)
FSD90I -R3; Cerberus Remote Annunciator (Red)
*FDC10422; Input/Output Module
RATING: 120V 60hz 2A
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes and ordinances
and in a manner acceptable to the authority having jurisdiction.
MARKING: Listee's name, model number, electrical rating, and UL label.
APPROVAL: Listed as fire alarm control units for use with separately listed compatible initiating and
indicating devices. Refer to manufacturer's Installation Manual for details.
These control units can generate a distinctive three-pulse Temporal Pattern Fire Alarm
Evacuation Signal (for total evacuation) in accordance with NFPA 72, 2002 Edition.
This control unit meets the requirements of UL-864, 9th Edition Standard.
NOTE: For Fire Alarm Verification Feature (delay of fire alarm signal), the maximum
Rev 03-22-12 gt
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2018 Listing Expires June 30, 2019
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division
Listing No. 7165-0067:0259
PEge 2 of 2
Retard/Reset/Restart period shall not exceed 30 seconds.
*Rev 03-22-12 gt
This isting is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has rev[---wed
tie ,est results and/or other data but does not make an independent verification of any caims. This listing is not
En endorsement or recommendation of the item listed. This listing should not be used to verify correct
cpera:iona requirements or installation criterii Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2018 Listing Expires June 30, 2019
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division
SIEMENS Data Sheet
Fire Safety Products
Intelligent Detection Devices
Intelligent FirePrintTM Multi-Criteria Detector
[For use with FireFinder® XLS and FS-250 Panels]
Model HFP-11
ARCHITECT AND ENGINEER SPECIFICATIONS
Most sophisticated 'detector intelligence' available
Easily programmed to match specific hazard profiles from the fire alarm control panel (FACP)
FirePrintTM technology to differentiate between deceptive phenomena and an actual fire
Supports software-based automatic environmental compensation
System logic activation based on any of three (3) inputs
from the detector (smoke, heat or neural network) - - - -
Remote sensitivity-measurement capability
Pre-alarm reporting based on fire-profile selection
Polarity insensitive utilizing Sure WireTh technology Now
Multi-color detector status light-emitting diode (LED) -
Compatible with Model DPU (device programmer/ tester unit)
Field-cleanable chamber with replaceable chamber parts available
Multi-criteria fire detection for the price of a photoelectric detector
Optional fully programmable relay base, audible base and duct housing
Detectors are self-testing:
complete diagnostics every four seconds • ®UL and OULC Listed;
Two-wire operation FM. CSFM & NYC Fire Deoartment ADDroved
Product Overview
Model HFP-11 utilizes advanced detection technology
that allows each detector to distinguish non-
threatening deceptive phenomena —such as cigarette
smoke, from actual fire hazards, while optimizing
detection for the area it is intended to detect. Model
HFP-1 1 uses state-of-the-art microprocessor circuitry
with error check, detector self-diagnostics and
supervision programs.
Model HFP-1 us compatible with the Siemens - Fire
Safely field device program /test unit (Model DPU),
which is a compact, portable, menu-driven accessory
for electronically programming and testing detectors,
easily and reliably.
Model DPU eliminates the need for cumbersome,
unreliable mechanical programming methods -such
as dials or switches, and reduces installation and
service costs by electronically programming and
testing the detector prior to installation. Model HFP-1 1
is compatible with FS-250 and Fire Finder XLS FACPs.
Specifications
Model HFP-1 1 is a plug-in, two-wire and multi-sensor detector
(with both photoelectric and thermal inputs) that is compatible
with FireFinder XIS and FS-250 series of FACPs.
Each detector consists of a dust-resistant, field-cleanable and
photoelectric chamber; a solid state, non-mechanical thermal
sensor, and microprocessor-based electronics with a low-profile
plastic housing. Model HFP-1 1 utilizes state-of-the-art ASIC
circuitry and surface-mount technology for maximum reliability.
Every Model HFP-1 1 fire detector is shipped with a protective
dust cover. Model HFP-1 1 utilizes an infrared light emitting
diode (IRLED), and light-sensing photodiode. Under normal
conditions, light transmitted by the LED is directed away from
the photodiode and scattered through the smoke chamber in a
controlled pattern.
Model HFP-1 1 is®Uriderwriters' Laboratory and ®Underwriters'
Laboratory of Canada Listed.
FirePrintlM Multi-Criteria Detector 6301
SIEMENS Industry, Inc.
Building Technologies Division
Specifications - (continued)
The smoke chamber is designed to manage light
dissipation and extraneous reflections from dust particles
or other non-smoke, airborne contaminants in such a way
as to maintain stable, consistent detector operation.
When smoke enters the detector chamber, light emitted
from the IRLED is scattered by the smoke particles, and is
received by the photodiode.
Model HFP-1 1 also utilizes a modern, accurate and
shock-resistant thermistor to sense temperature
changes. Theon-board'FirePrintrm technology allows
the detector to first gather smoke and thermal data, a--id
then analyze this information in the detector's 'neural
network.' By comparing data received with the
common characteristics of fires or fire fingerprints,
Model HFP-1 1 can compare these 'fire prints' to those of
deceptive phenomena that cause other detectors to
false alarm.
FirePrint
The advanced FirePrint technology allows Model HFP-1 1
to accurately determine a true fire hazard from
unthreatening, deceptive phenomena. Further, the
advanced FirePrint technology will not require a need to
use alarm-delaying verification and confirmation
techniques, which can increase the probability of losses
due to fire. Model HFP-1 1 provides the highest level of
detector intelligence available today with a detector /
control panel link that allows the user to program the
detector for the specific hazard profile, using a simple
software menu selection.
Model HFP-1 l's FirePrint application monitors input
from both the photo chamber and the thermal sensor,
evaluating this information with sophisticated
mathematical formulas or algorithms, comparing this
input to characteristics of both threatening fires and
deceptive phenomena that would mislead any ordinary
detector.
Detectors are optimized by selecting one (1) of the
following 11 applications:
Office/Retail
Lobby
Computer room
Dormitory
Healthcare
Parking garage
Utility / Transformer room
Hostile environment
Precious storage
Air Duct
Warehouse I Light Manufacturing
The control panel programs Model HFP-1 1 detector for
the protected area without hassle and without confirmation
delays. Once optimized for the hazards in the protected
area, Model HFP-1 1 provides the best detection. Should
the operator or installer forget to program the detector,
Model HFP-1 1 will revert to a default setting, allowing
operation as an office-environment detector.
SIEMENS Industry, Inc.
Building Technologies Division
The FirePrint technology was developed over years of research
and reviewing the results of over 20 years of fire test data in one
of the world's most advanced fire-research centers.
The results of this research are the mathematical models that
form the algorithms used in FirePrint. No other fire detector
has this level of intelligence or this amount of research and
development supporting its design. The microprocessor's
software can identify and disregard false input caused by radio
frequency (RFI) and electromagnetic (EMI) interference, while
validating all Trouble conditions before annunciating or
reporting to the FAG.
Model HFP-11
The Model HFP-1 1 detector's microprocessor uses an essential
electronically erasable programmable read-only memory
(EEPROM) to store the detector's address and other critical
operating parameters, including the assigned program values
for Alarm and Trouble thresholds.
Communication within the detector, as well as between Model
HFP-1 1 and the control panel, or with Model DPU (field device
programmer/test unit), are supervised and safe-guarded
against disruption by reliable, microprocessor-based error
checking routines.
Additionally, the micro-processor supervises all EEPROM
memory locations, and provides a high degree of EEPROM-
failure fault tolerance. Model HFP-1 1 determines its operating
status to be Normal in Alarm or in Trouble modes, depending
on the difference between the alarm threshold values stored in
the detector's memory and the detector's latest analog
measurement
The detector then communicates changes in its status to the
control panel. In addition, the FireFinder XLS control panel
will sample the value of the analog signal for Model HFP-1 1 over
a period of time, in orderto determine if those values indicate
excessive buildup in the photo chamber. If such is the case, the
FireFinder XLS control panel will indicate the particular
detector requires maintenance.
Model HFP-1 1 is listed as a self-testing device. The visible light
emitting diode (LED) for Model HFP-1 1 flashes green every four
(4) seconds to indicate it is communicating with the control
panel, as well as to indicate it has passed its internal self-test
Should the detector sense a fault or failure within its systems,
the LED will flash amber, and the detector will transmit that data
to the control panel.
A quick visual inspection is enough to indicate the condition of
the detector at anytime. If more detailed information is
required, a printed report can be provided from the FireFinder
XLS FACP, indicating the status and settings assigned to each
individual detector. When Model HFP-1 1 moves to the Alarm
mode, it will flash red, and will continue flashing until the
system is reset at the FACP. Simultaneously, any user-defined,
system-alarm functions programmed into the system are
activated.
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION
OFFICE OF THE STATE FIRE MARSHAL
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. 7272-0067:0203 Page 1 of I
CATEGORY: 7272 -- SMOKE DETECTOR-SYSTEM TYPE-PHOTOELECTRIC
LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ
07932
Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652
Email: evelyn.esteban@siemens.com
DESIGN: Models FP-11, HFP-11, and *HFPO..1I analog and FPO-11 photoelectric type smoke
detectors. Models FP-1, and HFP-1 I also have a supplemental 1350F heat sensor. Model
DGH-1 I detector guard housing suitable for use with Models HFP-1 1, *HFPO..1 I and FP-1 I
smoke detectors. Refer to listee's data sheet for additional detailed product description and
operational considerations.
RATING:
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances
and in a manner acceptable to the authority having jurisdiction. These detectors are intended
for installation on a vertical wall surface or the ceiling. They are also acceptable for duct
application with an air velocity of 0-4000 ft/mm. when used with Models DB-1 1, DB-HR or
DB-X1IRS bases.
MARKING: Listees name, model number, and UL label.
APPROVAL: Listed as photoelectric type smoke detectors for use with listee's separately listed base
Model DB-11, DB-HR or DB-X1IRS (CSFM Listing No. 7300-0067:134) and separately listed
compatible fire alarm control units. Model DGH-1 I detector guard housing is listed for use
only with FP-11 and HFP-11. Refer to listee's Installation Instruction Manual for details.
NOTE:
*Rev. 09-27-2004
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2018 Listing Expires June 30, 2019
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division
Model DB-i 1 E
SIEMENS Data Sheet
Fire Safety & Security Products
Specialized Detection Devices
'DB' Series Detector Bases
Models D132-HR, DB-11 and DB-11E
ARCHITECT AND ENGINEER SPECIFICATIONS
Each detector base is compatible with Model 'H', "1 1" __-E.
and "1 21" series of conventional detectors
All bases compatible with the optional Model LK-11 detector-locking kit
Each detector base also functions with the addressable
(
Model'H' series, as well as Models FD0421, FDOT421,
FDOOT441, FDOOTC441 and FDT421 intelligent devices Model DB2-HR
Model 0B2-HR is also compatible with ASAtechno!ogyTM detectors
Model DB2-HR has backwards compatibility with Siemens
Model 'H'-series intelligent detectors -0
Models DB-i 1 and DR-i 1 E mount on a 4-inch square,
octagon or single-gang electrical box
Model DB-1 1 has plugs to cover the outer-mounting screw holes Model DB-1 1
Model D132-HR mounts on a 4"-square, double- • UL 268 Listed, ®ULC-5529 Listed;
gang electrical box FM, CSFM and NYC Fire Department Approved
Product Overview
The detector bases are low-profile, surface-mounting bases
used on various Siemens - Fire Safety conventional and
addressable detectors.
Model D132-1-111, which is a redesign of Model DB-HR, is
compatible with the standard, addressable type of
intelligent detectors, as well as those detection devices
that operate with ASAtechnoIog.
Additionally, Model D132-HR is backward compatible with
the Siemens Model 'H'-series intelligent detectors and
detector-assigned FACPs. Model DB2-HR can also operate
with Siemens 50-point addressable; 252-point
addressable; 504-point addressable, and FireFinder5 XLS
fire systems. A relay output from the fire detector base for
signaling other devices is provided by Model DB2-HR.
The detector bases use screw-clamp contacts for electrical
connections and self-wiping contacts for better reliability.
Further, the bases can be used with the optional Model LK-
11 detector locking kit, which contains 50 detector locks
and an installation tool, to prevent unauthorized removal
of the detector head.
Specifications
Models D13-1 1 and DB-1 1 E are the standard bases for
Model 'H'-series 11 " and Model "121 "-series conventional
detectors, as well as the Model 'H'-series addressable
detectors. Model D13-1 1 has a 6-inch (15.2 cm) diameter.
The diameter for Model D13-1 1 E is 4.5 inches (11.4 cm).
Specifications - (continued)
Moreover, Models D13-1 1 and D13-1 1 E mount on a 4"-square,
(10.2 cm) octagon or single-gang box. Model D13-1 1 has
integral, decorative plugs to cover the outer screw holes.
However, Model D82-HR mounts on a double-gang, 4-inch
(10.2 cm.) square electrical box.
Dimensions
I r-----6" (11.4 —.)Diameter I
1,2"(1.27c..)
L --- 41ffi" finn
I Note: Model D-11 E base detector has a diameter dimension of 4.5" (11.4 cm.). I
Mounting Diagram0SOX
Model DB2-HR 3.1,2 INCHES2EEP
44NCH SQUARE BOXP ncc
RN-0-21-0
BREAK OFF THIS \ BREAK OFF THIS
SECTION WHEN \ SECTION WHEN
USINGA4-INCH \ USINGADOUBLE-
SQUARE BOX 'GANG BOX
Notes: The Module Barrier (shown to the right) must be used when Model DB2-HR relay contacts are
connected to non-power-limited circuits. Break apart the barrier to the correct size and shape
for either the 4-inch square or double-gang box. Install the barrier diagonally into the back box
to create two (2), separate compartments with the back box, in order to separate the wires.
SIEMENS Industry, Inc.
Building Technologies Division
Detector Bases ['0 B' Series] 6161
S.-- •-O -. •:- :. •— C -
Wiring Diagrams
L,cartl,Coatat (IOThPOL*J1TY VWCNWPLCA&E)
Dale
01
:@k
atflnznflnrliats WIf1fl I.
tilt. pmit. .nbl,..Io...ctN..
2. WW. . taB Sq lund S c.flul. a*cdqaa RWII tC.It.Rle.tt CaSe2
diuutuluynd 0.tIDBIMd.IAN RII uwdS*i atlith. 0MYdltna*.hIBM alaS. RLC.11.ew.tl tc-,aDuy.,, n.c.,,msei-,I t,n..-,
Note: Te illustration above is typical wiring for Models DB-1 1 and DB-1 1 E (using Models PE-11, PE-11T, DT-11, 0P121, 0H121, and H1121 detectors).
08-1lt-llE(NO REMOTE CEetCE) DB-IIXRS(REMOTE RELAY BASE) TO EXT BASE DO MDI + + + / USE AN END OF
_____ ° IL40 i\0EvE TO INrnATtNr
____ 18 oPTIONAL E CFCUITOf S. RESAr ( 5 Ia
SIEMENS IIJSTRY. 6
rN
'coerrAcTs L
0 ________ -'
6 lb
c:T -11
—
CCEIMTELE TOR MODELS
26
3A.0VDC II 4 00 MDT
USE?.N
'The rulay contacts
___ ___
ate shown in the Non-Aiwn,/System Reset condta.
______
TONE'
END OF
- LINE BA De"Xi
Ti-,, illustration above is typical wiring for Models JB 11 and DB liE (using Models FP-1 1 FPT 11 FS DP ES DPT and ES DT de ectors)
05-li (NO REMOTE VICE) OB-tE (REMOTE REIAYBASE) TO NEW BASS DO NOT E11-II use M MDOc
To a
pie
INTIATING _______
5 la
II 1
ajiroc
SIEMENS REMDTE
ALARM i-kH 6
E
I01atTR 6 lb I
cOMT1&E
DkOVDC 4DO / P4ATOR I :ol 0 MODELS _________ NC
CONTILUMT _______
__ _
END
II 101 EXAN
INE
'The r&ay
NOTE: SFP-11
LINE r*______ /
Reset condition.
'32=4
s a polarity IteesskIee thtect01. LMe
use in Canada 01*.
1 and Une 2
OF
13 I'EXT BASE DEVICE
can be e(th*r e of th010q '°HFP-lIIHFPT-ll/}FPO-ltGFP-ll/SFPT.lIISFPO-ll
ccl,tacts are shoes in the Non.Aiatm/Syste.n
Sales delaclats are proved f
Note Th° illustration above is typical wiring for Models DB 11 and DB liE (using Models HFP 11 Series and SEP 11 Series detectors)t
LPEI teen ioaexT I NOTl OF Lee dl
J1
I WOCILM MR CFUTRA7PI3242XE),A
TO aeaete eutism a,.xr tEINT1i cGflcti tAM CE. coNlRoM . , SHOYN IN THE I C
_10— PESETCONOMN.
tIY
-
iOIa7 Vl
LIES LINE DONOTDa,AJ1EMD
OFLINEDEVICE
VWIESCDMB=WIOTBL'M4WWENlERCItOMMECUWALSO[OfOPPMrMSMCFWVES C&ClED10iitC1Bl B I DCAN DC POKM OR tawoeseazaiED*pUCAil.
Note: The illustration above s typical wiring for Model DB2-HR for polarity-insensitive detectors)
Details for Ordering
Model
Number
Part
Number Description
A02-P 500-649706 Air-Duct Housing -
AD2-PR 500-649707 Air-Duct Housing with Relay
DB-1 1 500-094151 Low-Profile Surface-Mount Base
DB-1 1 C 500-095687 Low-Profile Surface-Mount Base [Canada]
08-1 1 E 500-094151 E Smaller-Diameter Detector Base
DB-HR 500-033220 Relay Base for'H'-Series Intelligent Detector
DB2-HR S54370-F1 2-Al Relay base compatible with 'S-Line and c-me detectors;
backwards compatible with Mode: 'H'-series detectors
01-11 500-095430 135°F {57.2°C}Low-Profile Thermal Detector
DT-1 1 C 500-095983 Low-Profile Thermal Detector [Canada]
FD0421 554320-F4-A1 Photoelectric Smoke Detector
F001421 1 554320-F6-A1 Addressable Multi-Criteria Fire Detector
FDT421 S5432045-A1 Thermal (Heat) Detector
F000T44I 554320-F7-A1 Multi-Criteria Fire Detector with ASAtechnoIogy°
FDOOTC441 S54320-F8-A1 Multi-Criteria Fire/CO Detector with ASAtechnoIogy1°
LK-1 1 500-695350 Base Locking Kit for Model '11 '-series detectors
Model
Number
Part
Number Description
FP-1 1 500-095112 FirePrint Intelligent Detector
FP-1 1 C 500-095112C FirePrint'm Intelligent Detector [Canada]
FPT-1 1 500-095918 Thermal Detector
FPT-1 1 C 500-095918C Thermal Detetor [Canada]
HFPO-1 1 500-034800 FS-250 Addressable Ce:ector
HFP-1 1 500-033290 FirePrintT' Detector
HFPT-1 1 500-033380 Thermal Detector
HI1 21 554372-F3-A1 Heat Detector,
0H121 554372-F2-A1 Multi-Sensor Smoke Detector
0P121 554372-Fl-Al Photoelectric Smoke Detector
PE-1 1 500-094150 Conventional 2hotoelectric Smoke Detector
PE-1 1 500-095150 Photoelectric Smoke Detector with 135°F
(57.2°C} Thermal Sensor
SFP-1 1 500-33290C Photo I Thermal Detector [Canada]
SFPO-11 500-34800C Photo Detector [Canada]
SFPT-1 1 500-033380C )etector Package [Carada]
- - Notice: This marketing data sheet is not intended to be used for system design or installation purposes. .
For the most up-to-date information refer to each products installation instructions
Fire Safety Fire Safety
8 Fernwood Road 2 Kenview Boulevard
SIEMENS Industry, Inc... Florham Pars, NJ 07932 Brampton, Ontario
Building Technologies Division Tel: (973) 593-2600 (sll-Fs) L6T 5E4 I Canada September 2012
FAX: (908) 547-6877 Printed in U.S.A. Tel: (905) 799-9937 5Upers.edls sheet dated 4/12
URL: www.usa.Siemens.com/Fire FAX: (905) 799-9858
Specifications - (continued)
Detector sensitivity, calibration and identification are
dynamically supervised at the respective FACP.
Detector sensitivity and pre-alarm levels are a
function of the application chosen at the control
panel, and are controlled by the panel. If an
alternate, non-FirePrint mode is selected, then the
sensitivity can be changed from the control panel.
All Model HFP-1 1 detectors use a surface mounting
base, Model DB-1 1, which mounts on a 4-inch
octagonal, square or single gang electrical box. The
base utilizes screw-clamp contacts for electrical
connections and self-wiping contacts for increased
reliability. Model DB-1 1 can be used with the optional
Model LK-1 1 detector locking kit, which contains 50
detector locks and an installation tool to prevent
unauthorized removal of the detector head. Model
DB-1 1 has integral decorative plugs to cover the outer
mounting screw holes.
Model HFP-1 1 may be installed on the same
initiating circuit with Model HMS-series manual
stations; Model HTRI-series interfaces; Model HCP
output-control devices, or Model HZM series of
addressable, conventional zone modules. All Model
HFP-1 1 detectors can be cleaned in the field - when
required -via easily removing the detector cover and
unsnapping the photo chamber. There is also the
option of cleaning the interior of the detector with a
clean, soft cloth or brush - or by replacing the
labyrinth and bug screen included in the detector
maintenance kit, Model DMK-1 1.
All Model HFP-1 1 detectors are approved for operation
within the ®U L-specified temperature range
of 32 to 100°F (0 to 38°C).
Model DPU
The Device Program /Test Unit accessory is used to
program and verify the address of the detector. The
technician selects the accessory's program mode,
and enters the desired address. Model DPU
automatically sets and verifies the address and tests
the detector.
Model DPU operates on AC power or rechargeable
batteries, providing flexibility and convenience in
programming and testing equipment from practically
any location.
When in 'test' mode, Model DPU will perform a series
of diagnostic tests without altering the address or
other stored data, allowing technicians to determine
if the detector is operating properly.
SIEMENS Industry, Inc.
Building Technologies Division
Application Data
Installation of the Model HFP-1 1 series of fire detectors
requires a two-wire circuit. In many retrofit cases,
existing wiring may be used. T-tappirig' is permitted only
for Style 4 (Class B) wiring. Model HFP-1 1 is polarity
insensitive, which can greatly reduce installation and
debugging time. Model HFP-1 1 fire detectors can be
applied within the maximum 30 foot center spacing (900
sq. ft. areas,) as referenced in NFPA 72. This application
guideline is based on ideal conditions, specifically,
smooth ceiling surfaces, minimal air movement, and no
physical obstructions between potential fire sources and
the actual detector. Do not mount detectors in close
proximity to ventilation or heating and air conditioning
outlets. Exposed joints or beamed ceilings may also
affect safe spacing limitations for detectors.
Should questions arise regarding detector placement,
observe NFPA 72 guidelines. Good fire-protection system
engineering and common sense dictate how and when
fire detectors are installed and used. Contact your local
Siemens - Fire Safety distributor or sales office whenever
you need assistance applying FirePrint in unusual
applications. Be sure to follow NFPA guidelines and ®UL
Listed /'ULC Listed installation instructions—included
with every Siemens—Fire Safety detector—and local
codes as for all fire protection equipment.
Technical Data
Operating Temperatures: +32°F (0°C) to
100°F (38°C),
per ®UL 268 I 268A
Relative Humidity: 0-93%
Non-condensing
Maximum Spacing: 30-foot Centers
(900 Square Feet),
per NFPA 72 Chapter 5
and ®ULC-S524
Current Draw: 1 mA in Alarm or
Supervisory mode
Mniinfinvi fliicirm Details for Ordering
Part
Mode! Number Description
HFP-1 1 500-033290 FirePrint Multi-Criteria Fire Detector
DB-1 1 500-094151 Detector Mounting Base for Series 11
DB-1 1 E 500-094151 E Detector Base {small}
AD2-P 500-649706 Air-Duct Housing
AD2-XHR 500-649708 Air-Duct Housing {with relay}
DB-HR 500-033220 Relay Base for
H-Series Intelligent Detectors
ADBH-1 1 500-033210 Audible Base
RL-HC 500-033230 Remote Alarm Indicator:
4" octagon-box mount, red
RL-HW 500-033310 Remote Alarm Indicator:
Single-gang box mount, red
LK-1 1 500-695350 Base Locking Kit for Series 11
Detectors
Series 11 Maintenance Kit
DMK-1 1 500-695338 {replacement labyrinth and
bug screen}
In Canada, order
Model Part Description Number
1DB-1 1 C 500-095687 Detector Mounting Base
for Series 11 Detectors (fULC)
Notice: This marketing data sheet is not intended to be used for system design or installation purposes.
For the most up-to-date information, refer to each product's installation instructions.
Fire Safety , Fire Safety
8 Fernwood Road 2 Kenview Boulevard
SlEMENSIndustry, Inc. Florham Park, NJ 07932 Brampton, Ontario
Building Technologies Division Tel: (973) 593-2600 lsll-Fsl L6T 5E4 I Canada June 2015
Supersedes sheet dated 9/13 FAX: (908) 547-6877 Printed in USA. Tel: (905) 799-9937 (Rev. 5(
LIRL: wwwjjsa.Siemens.comlFire FAX: (905) 799-9858
CALIFORNIA DEPARTMENT OF FORESTRY & FIRE PROTECTION apt ffih OFFICE OF THE STATE FIRE MARSHAL o
FIRE ENGINEERING - BUILDING MATERIALS LISTING PROGRAM
LISTING SERVICE
LISTING No. 7300-0067:0134 Page 1 of 1
CATEGORY: 7300 -- FIRE ALARM CONTROL UNIT ACCESSORIES/MISC. DEVICES
LISTEE: Siemens Industry, Inc. Building Technologies Division8 Fernwood Road, Florham Park, NJ
07932
Contact: Evelyn Esteban (973) 593-6582 Fax (973) 593-6652
Email: evelyn.esteban@siemens.com
DESIGN: Models DB4T, D134TS, DB4F, DB4TF, DB4FS, DB3S, ADB3, ADBX3, DB-HR, *DB2..HR
DBX3RS, DB-11, DB-XIIRS, ADBI60, ADB-11, ADBH-11,SBGA-34, ADBX-11 and 8837
detector bases and Model DB-ADPT detector/base adapter. Suitable for use with Models
RR2 or RR3 auxiliary relays. Model DB-1 I is suitable for use only with Model RR-1 I or
RR-1 IF auxiliary relay. Models DB-1 I base, ADBH-1 I audible base, and DB-HR, *DB2..HR
relay bases are intended to be used with Models HFP-1 1, *HFPO1 1 and HFPT-1 I Intelligent
Series smoke and heat detectors (CSFM Listing No. 7272-0067:0223 and 7270-0067:0224).
Model SBGA-34 audible base is intended to be used with Models HFP-1 1, HFPT-1 1, or
HFPO-1 I detectors (CSFM Listing No. 7272-0067:0223 and 7270-0067:0224), Models
FDOT42I, FD0421, 0H921 and 0P921 detectors (CSFM Listing No.7272-0067:0258),
Models FDT42I and H1921 detectors (CSFM Listing No.7270-0067:0262), and Models
FDOOT44I, FDOOTC44I, 00HC941 and 0OH941 detectors (CSFM Listing
No.7270-0067:0260). *Model DB2-HR Relay Base can be used also with Intelligent Series
smoke detectors type FDOT421, FD0421, 01-1921, 0P921(CSFM Listing
No.7272-0067:0258), FDT421, H1921 (CSFM Listing No.7270-0067:0262), and FDOOT44I,
FDOOTC44I, 00HC941, 00H941(CSFM Listing No.7270-0067:0260). Refer to listee's data
sheet for additional detailed product description and operational considerations.
INSTALLATION: In accordance with listee's printed installation instructions, applicable codes & ordinances
and in a manner acceptable to the authority having jurisdiction. Model DB-1 1, ADBH-1 1,
SBGA-34, DB-HR and *DB2HR may be installed on the ceiling or on the wall.
MARKING: Listee's name or SIEMENS, model number, electrical rating and UL label.
APPROVAL: Listed as detector bases for use with separately listed compatible smoke detector heads
and fire alarm control units.
*Rev. 04-15-14 gt
This listing is based upon technical data submitted by the applicant. CSFM Fire Engineering staff has reviewed
the test results and/or other data but does not make an independent verification of any claims. This listing is not
an endorsement or recommendation of the item listed. This listing should not be used to verify correct
operational requirements or installation criteria. Refer to listee's data sheet, installation instructions and/or other
Date Issued: July 01, 2018 Listing Expires June 30, 2019
Authorized By: DAVID CASTILLO, Program Coordinator
Fire Engineering Division