HomeMy WebLinkAbout1200 OAK AVE; ; AS090054; PermitPermit No: AS090054
Job Address: 1200 OAK AV
Permit Type: SPRINK
Parcel No: 1561804800
Lot #: 0
Status: ISSUED
Applied 6/11/2009
Approved: 6/11/2009
7/19/22, 5:09 PM AS090054 Permit Data
City of Carlsbad
Sprinkler Permit
Reference No.: Issued: 6/11/2009
PC #: Inspector:
Project Title: LOT 2 TWO FIRE SPRINKLER INSPECTIONS @ $65./EA
Owner:
BUSBY GENE
Applicant:
INNOVATIVE FIRE PROTECTION
SUITE 101
8779 COTTONWOOD AV
SANTEE, CA
(619) 593-8200 (619)593-9133
1212 OAK AVE
CARLSBAD CA
Fees ($) Add'I Fees ($) Total ($) Balance ($)
130 0 130 0
about:blank 1/1
oo6
J CARLSBAD FIRE FROTERCTION SERVICES
Permit Submittal Form
A. Check or fill in pertinent information for type of permit you are submitting.
AS —Automatic Sprinklers
Commercial Residential_________________
Number of Heads per System:
System 4 Heads 42- System # Heads
System #2.- Heads System # Heads___
System Ii Heads System # Heads
Underground included for approval 00
Underground included for reference pnly Total-Fees
FA - Fire Alarm
]0 Devices orless
Over 10 devices # of devices Total Fees
FS - Fired Systems (Circle One)
Hood & Duct, Halon, Special Chemical Agent, Standpipe, Total Fees
Spray Booth, or Appliance.
There maybe an additional fee of $55.00 per 1/2 for Failed Inspections.
Address ofjob site: -
O7//2-O Suite
Building Permit #.CB
Contractor Information
Name t 6v4n k 770?J IA/C.
Address ei AIWZ(i 4V1
City, State, Zip JiE7 CA 2o -71
___ Kind of License and number t1 ( _Phone 13 2Q9 FAX 3--'1( :5
Do you currently have a Certificate of Insurance on file with the Fire Dept ?or N
Do you currently have a business license on file with the City of CarlsbadZr N
Signature JJ_Date £4'
Permit Submttal Form 02/02/2001
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 1
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE; OAK AVE. LOT #2 TWO HEAD CALC-M. BEDROOM
WATER SUPPLY DATA
SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ'D
NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS.
TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI)
1 85.0 81.0 500.0 85.0 31.1 60.0
AGGREGATE FLOW ANALYSIS:
TOTAL FLOW AT SOURCE 31.1 GPM
TOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPM
OTHER HOSE STREAM ALLOWANCES 5.0 GPM
TOTAL DISCHARGE FROM ACTIVE SPRINKLERS 26.1 GPM
NODE ANALYSIS DATA
NODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE
(FT) (PSI) (GPM)
1 0.0 SOURCE 60.0 31.1
2 0.0 - - - - 49.8 - - -
2A 0.0 - - - - 45.8 - - -
3A 0.0 HOSE STREAM 44.5 5.0
3 0.5 - - - - 42.3 - - -
4 3.5 - - - - 39.3
5 10.5 - - - - 32.3
6 10.5 - - - - 31.6 - - -
7 22.0 - - - - 23.6 - - -
8 22.0 - - - - 23.0
9 22.0 - - - - 23.0 - - -
10 22.0 - - - - 23.0 - - -
10A 21.5 - - - - 23.2
hA 21.5 - - - - 23.2 - - -
12 22.0 - - - - 20.5 - - -
13 27.0 - - - - 9.4
13A 26.5 K= 4.30 9.1 13.0
14A 26.5 K= 4.30 9.2 13.0
These plans have been reviewed for apparent compliance
with the current applicable cdes and staiidardin force
in the junsclicuon. Tbe.wnr or contractor May utilize
this review in support of an appjication for a huildlntt
perinhl with the express understanding that this review
in no way relieves the owner or contractor or their
proi'èssional engineer or architect, for sole responsibility
for full col pliance with said codes and standards.
th including e hiiildiitg code or forany responsihihy for dct1i.tencis. errors. omissions or negligence in these
plans whether, or not tinted in this review.
Dale: /02/0Reviewer
RECOMMENj) APPRfVAL
0 RECOMMEND APPROVAL. AS NOTED
I
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-M. BEDROOM
PIPE DATA
PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS.
END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM.
NODES (FT) (K) (PSI) (GPM) FL/FT (PSI)
Pipe: 1 31.1 0.995 PL 30.00 PF 10.2
1 0.0 SRCE 60.0 (N/A) 12.8 150 FTG TLG PE 0.0
2 0.0 0.0 49.8 0.0 0.251 TL 40.50 PV
Pipe: 2 FIXED PRESSURE LOSS DEVICE
2 0.0 0.0 49.8 0.0 4.0 psi, 31.0 gpm
2A 0.0 0.0 4518 0.0
Pipe: 3 31.0 1.590 PL 40.00 PF 1.3
2A 0.0 0.0 45.8 0.0 5.0 150 FTG 4L PE 0.0
3A 0.0 H.S. 44.5 5.0 0.026 TL 52.00 PV
Pipe: 4 26.0 1.265 PL 10.00 PF 2.0
3A 0.0 H.S. 44.5 5.0 6.6 150 FTG T3LC PE -0.2
3 0.5 0.0 42.3 0.0 0.056 TL 36.00 PV
Pipe: 5 26.0 1.049 PL 3.00 PF 1.7
3 0.5 0.0 42.3 0.0 9.7 120 FTG C PE -1.3
4 3.5 0.0 39.3 0.0 0.212 TL 8.00 PV
Pipe: 6 26.0 1.101 PL 20.50 PF 3.9
4 3.5 0.0 39.3 0.0 8.8 150 FTG ET3R PE -3.0
5 10.5 0.0 32.3 0.0 0.111 TL 35.50 PV
Pipe: 7 26.0 1.101 PL 1.50 PF 0.7
5 10.5 0.0 32.3 0.0 8.8 150 FTG T PE 0.0
6 10.5 0.0 31.6 0.0 0.111 TL 6.50 PV
Pipe: 8 26.0 1.101 PL 13.00 PF 3.0
6 10.5 0.0 31.6 0.0 8.8 150 FTG ET2R PE -5.0
7 22.0 0.0 23.6 0.0 0.111 TL 27.00 PV
Pipe: 9 26.0 1.101 PL 0.50 PF 0.6
7 22.0 0.0 23.6 0.0 8.8 150 FTG T PE 0.0
8 22.0 0.0 23.0 0.0 0.111 TL 5.50 PV
Pipe: 10 0.0 1.101 PL 33.00 PF 0.0
8 22.0 0.0 23.0 0.0 0.0 150 FTG E2T5R PE 0.0
9 22.0 0.0 23.0 0.0 0.000 TL 55.00 PV
Pipe: 11 0.0 1.101 PL 20.50 PF 0.0
9 22.0 0.0 23.0 0.0 0.0 150 FTG ET2R PE 0.0
10 22.0 0.0 23.0 0.0 0.000 TL 34.50 PV
Pipe: 12 0.0 1.101 PL 0.50 PF 0.0
10 22.0 0.0 23.0 0.0 0.0 150 FTG TR PE 0.2
bA 21.5 0.0 23.2 0.0 0.000 TL 6.50 PV
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-M. BEDROOM
PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS.
END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM.
NODES (FT) (K) (PSI) (GPM) FL/FT (PSI)
Pipe: 13 0.0 1.101 PL 10.50 PF 0.0
10 22.0 0.0 23.0 0.0 0.0 150 FTG TR PE 0.2
hA 21.5 0.0 23.2 0.0 0.000 TL 16.50 PV
Pipe: 14 26.0 1.101 PL 19.00 PF 2.4
8 22.0 0.0 23.0 0.0 8.8 150 FTG 3R PE 0.0
12 22.0 0.0 20.5 0.0 0.111 TL 22.00 PV
Pipe: 15 26.0 1.101 PL 45.50 PF 8.9
12 22.0 0.0 20.5 0.0 8.8 150 FTG 2E4TR PE -2.2
13 27.0 0.0 9.4 0.0 0.111 TL 80.50 PV
Pipe: 16 13.0 1.101 PL 4.00 PF 0.5
13 27.0 0.0 9.4 0.0 4.4 150 FTG ETR PE 0.2
13A 26.5 4.3 9.1 13.0 0.031 TL 17.00 PV
Pipe: 17 13.0 1.101 PL 7.00 PF 0.5
13 27.0 0.0 9.4 0.0 4.4 150 FTG ER PE 0.2
14A 26.5 4.3 9.2 13.0 0.031 TL 15.00 PV
NOTES (HASS)
Calculations were performed by the HASS 8.0 computer program
under license no. 16080621 granted by
HRS Systems, Inc.
208 South Public Square
Petersburg, TN 37144
The system has been calculated to provide an average
imbalance at each node of 0.004 gpm and a maximum
imbalance at any node of 0.067 gpm.
Total pressure at each node is used in balancing the system.
Maximum water velocity is 12.8 ft/sec at pipe 1.
PIPE FITTINGS TABLE
Pipe Table Name: FSS.PIP
1
I
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-M. BEDROOM
PAGE: A MATERIAL: SCH40 HWC: 120
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee
1.049 2.00 5.00 2.00 5.00 6.00 1.00 1.00 1.00
PAGE: H MATERIAL: CPVC HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T R K C L B L
Eli Tee TEERUN COUPLG EL45
1.101 7.00 5.00 1.00 0.00. 1.00 1.00 0.00 1.00
PAGE: I MATERIAL: CPPR-L HWC:. 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee
1.265 5.00 9.00 2.00 11.00 2.00 2.00 0.00 0.00
PAGE: J MATERIAL: S40PVC HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee
1.590 6.00 12.00 3.00 14.00 8.00 2.00 0.00 0.00
PAGE: K MATERIAL: CPPR-K HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee L
0.995 2.00 6.00 1.50 0.00 0.00 3.00 0.00 0.00
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-M. BEDROOM
WATER SUPPLY ANALYSIS
Static: 85.00 psi Resid: 81.00 psi Flow: 500.0 gpm
100.
1
80.'
G
A
U
G
E 602
P
R
E
40.
S
U
R
E
)L
LL
)L
LEGEND
Available pressure
84.98 psi @ 31.1 gpm
Required pressure
60.02 psi @ 31.1 gpm
Source Supply Curve
System Demand Curve
20.' )L
p
S
i
20C300 400 500 600 700 800 900 1000
FLOW (GPM)
- SPRINKLER SYSTEM .HYDRAULIC ANALYSIS Page 6
DATE 9/11/2009 : C:'\HASS74\C4211-REV.SDF
JOB:T]TLE: OAK AVE. LOT #2 TWO HEAD CALC-M. BEDROOM
WATER SUPPLY CURVE
96+
88+
*\\\\\\\\
o
I * <-81.0 psi @ 500 gpm
80+ Flow Test Point
72+
P 64+
R I
E X
S I
S 56+
U I
R I
E I
48+
P I
S I
I 40+
32+
24+
16+ LEGEND
X = Required Water Supply
60.02 psi @ 31.1 gpm
8+
0 = Available Water Supply
I 84.98 psi @31.lgpm
0++-+---+----+-----+------+ --------+ --------+ ---------+------------
200 300 400 500 600 700 800 900 1000
FLOW (GPM)
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 1
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-REAT ROOM
WATER SUPPLY DATA
SOURCE STATIC RESID. FLOW AVAIL. TOTAL REQ'D
NODE PRESS. PRESS. @ PRESS. @ DEMAND PRESS.
TAG (PSI) (PSI) (GPM) (PSI) (GPM) (PSI)
1 85.0 81.0 500.0 85.0 31.2 56.8
AGGREGATE FLOW ANALYSIS:
TOTAL FLOW AT SOURCE 31.2 GPM
TOTAL HOSE STREAM ALLOWANCE AT SOURCE 0.0 GPM
OTHER HOSE STREAM ALLOWANCES 5.0 GPM
TOTAL DISCHARGE FROM ACTIVE SPRINKLERS 26.2 GPM
NODE ANALYSIS DATA
NODE TAG ELEVATION NODE TYPE PRESSURE DISCHARGE
(FT) (PSI) (GPM)
1 0.0 SOURCE 56.8 31.2
2 0.0 - - - - 46.5 - - -
2A 0.0 - - - - 42.5
3A 0.0 HOSE STREAM 41.1 5.0
3 0.5 - - - - 38.9
4 3.5 - - - - 35.8
5 10.5 - - - - 28.8
6 10.5 - - - - 28.1 - - -
7 22.0 - - - 20.1 - - -
8 22.0 - - - - 19.5 - - -
9 22.0 - - - - 13.3
10 22.0 - - - - 9.4 - - -
10A 21.5 K= 4.30 9.4 13.2
hA 21.5 K= 4.30 9.1 13.0
12 22.0 - - - - 19.5 - - -
13 27.0 - - - - 17.3
13A 26.5 - - - - 17.5 - - -
14A 26.5 - - - - 17.5 - - -
"
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 2
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-GREAT ROOM
PIPE DATA
PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS.
END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT) SUM.
NODES (FT) (K) (PSI) (GPM) FL/FT (PSI)
Pipe: 1 31.2 0.995 PL 30.00 PF 10.3
1 0.0 SRCE 56.8 (N/A) 12.9 150 FTG TLG PE 0.0
2 0.0 0.0 46.5 0.0 0.254 TL 40.50 PV
Pipe: 2 FIXED PRESSURE LOSS DEVICE
2 0.0 0.0 46.5 0.0 4.0 psi, 31.2 gpm
2A 0.0 0.0 42.5 0.01
Pipe: 3 31.2 1.590 FL 40.00 PF 1.3
2A 0.0 0.0 42.5 0.0 5.0 150 FTG 4L FE 0.0
3A 0.0 H.S. 41.1 5.0 0.026 TL 52.00 PV
Pipe: 4 26.2 1.265 PL 10.00 PF 2.1
3A 0.0 H.S. 41.1 5.0 6.7 150 FTG T3LC PE -0.2
3 0.5 0.0 38.9 0.0 0.057 TL 36.00 PV
Pipe: 5 26.2 1.049 PL 3.00 PF 1.7
3 0.5 0.0 38.9 0.0 9.7 120 FTG C FE -1.3
4 3.5 0.0 35.8 0.0 0.215 TL 8.00 PV
Pipe: 6 26.2 1.101 FL 20.50 PF 4.0
4 3.5 0.0 35.8 0.0 8.8 150 FTG ET3R FE -3.0
5 10.5 0.0 28.8 0.0 0.112 TL 35.50 PV
Pipe: 7 26.2 1.101 PL 1.50 PF 0.7
5 10.5 0.0 28.8 0.0 8.8 150 FTG T FE 0.0
6 10.5 0.0 28.1 0.0 0.112 TL 6.50 PV
Pipe: 8 26.2 1.101 FL 13.00 PF 3.0
6 10.5 0.0 28.1 0.0 8.8 150 FTG ET2R FE -5.0
7 22.0 0.0 20.1 0.0 0.112 TL 27.00 PV
Pipe: 9 26.2 1.101 FL 0.50 PF 0.6
7 22.0 0.0 20.1 0.0 8.8 150 FTG T FE 0.0
8 22.0 0.0 19.5 0.0 0.112 TL 5.50 PV
Pipe: 10 26.2 1.101 PL 33.00 PF 6.2
8 22.0 0.0 19.5 0.0 8.8 150 FTG E2T5R FE 0.0
9 22.0 0.0 13.3 0.0 0.112 TL 55.00 PV
Pipe: 11 26.2 1.101 PL 20.50 PF 3.9
9 22.0 0.0 13.3 0.0 8.8 150 FTG ET2R PE 0.0
10 22.0 0.0 9.4 0.0 0.112 TL 34.50 PV
Pipe: 12 13.2 1.101 FL 0.50 PF 0.2
10 22.0 0.0 9.4 0.0 4.5 150 FTG TR FE 0.2
bA 21.5 4.3 9.4 13.2 0.032 TL 6.50 PV
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 3
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-GREAT ROOM
PIPE TAG Q(GPM) DIA(IN) LENGTH PRESS.
END ELEV. NOZ. PT DISC. VEL(FPS) HW(C) (FT)- SUM.
NODES (FT) (K) (PSI) (GPM) FL/FT (PSI)
Pipe: 13 13.0 1.101 PL 10.50 PF 0.5
10 22.0 0.0 9.4 0.0 4.4 150 FTG TR PE 0.2
hA 21.5 4.3 9.1 13.0 0.031 TL 16.50 PV
Pipe: 14 0.0 1.101 PL 19.00 FF 0.0
8 22.0 0.0 19:5 0.0 0.0 150 FTG 3R PE 0.0
12 22.0 0.0 19.5 0.0 0.000 TL 22.00 PV
Pipe: 15 1 0.0 1.101 FL 45.50 PF 0.0
12 22.0 0.0 19.5 0.0 0.0 150 FTG 2E4TR FE -2.2
13 27.0 0.0 17.3 0.0 0.000 TL 80.50 PV
Pipe: 16 0.0 1.101 FL 4.00 FF 0.0
13 27.0 0.0 17.3 0.0 0.0 150 FTG ETR FE 0.2
13A 26.5 0.0 17.5 0.0 0.000 TL 17.00 PV
Pipe: 17 0.0 1.101 FL 7.00 FF 0.0
13 27.0 0.0 17.3 0.0 0.0 150 FTG ER FE 0.2
14A 26.5 0.0 17.5 0.0 0.000 TL 15.00 PV
NOTES (HASS)
Calculations were performed by the HASS 8.0 computer program
under license no. 16080621 granted by
HRS Systems, Inc.
208 South Public Square
Petersburg, TN 37144
The system has been calculated to provide an average
imbalance at each node of 0.006 gpm and a maximum
imbalance at any node of 0.102 gpm.
Total pressure at each node is used in balancing the system.
Maximum water velocity is 12.9 ft/sec at pipe 1.
PIPE FITTINGS TABLE
Pipe Table Name: FSS.PIP
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 4
DATE:. 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-GREAT ROOM
PAGE: A MATERIAL: SCH40 HWC: 120
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee
1.049 2.00 5.00 2.00 5.00 6.00 1.00 1.00 1.00
PAGE: H MATERIAL: CPVC HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T R K C L B L
Eli Tee TEERUN COUPLG EL45
1.101 7.00 5.00 1.00 0.00. 1.00 1.00 0.00 1.00
PAGE: I MATERIAL: CPPR-L HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee
1.265 5.00 9.00 2.00 11.00 2.00 2.00 0.00 0.00
PAGE: J MATERIAL: S40PVC HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee
1.590 6.00 12.00 3.00 14.00 8.00 2.00 0.00 0.00
PAGE: K MATERIAL: CPPR-K HWC: 150
Diameter Equivalent Fitting Lengths in Feet
(in) E T L C B G A D
Eli Tee L
0.995 2.00 6.00 1.50 0.00 0.00 3.00 0.00 0.00
SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 5
DATE: 9/11/2009 C:\HASS74\C4211-REV.SDF
JOB TITLE: OAK AVE. LOT #2 TWO HEAD CALC-GREAT ROOM
WATER SUPPLY ANALYSIS
Static: 85.00 psi Resid: 81.00 psi Flow: 500.0 gpm
100.0
LEGEND
1
80.0
Available pressure
84.98 psi @ 31.2 gpm
G
A
U
G
E 60.0
2
P
R
E
S 40.0
S
U
R
E
Required pressure
56.77 psi @ 31.2 gpm
Source Supply Curve
System Demand Curve
20.0
p
S
i
an
-14.71 1 I 1 1 I I I I I
20C300 400 500 600 700 800 900 1000
FLOW (GPM)
- SPRINKLER SYSTEM HYDRAULIC ANALYSIS Page 6
DATE: 9/11/2009 'H C:\HASS74\C4211-REV.sDF -
JOB TITLE OAK AVE LOT #2 TWO HEAD CALC-GREAT ROOM
WATER SUPPLY CURVE
96+
88+
*\\\\\\\\
O \\\\\\\\\
I * <-81.0 psi @ 500 gpm
80+ Flow Test Point
72+
P 64+
R I
E
S I
S 56X
U I
R I
E
48+
( I
P I
S
I 40+
32+
24+
16+ LEGEND
'I
I X = Required Water Supply
56.77 psi @ 31.2 gpm
8+
I 0 = Available Water Supply
I 84.98 psi @ 31.2 gpm U
+ ------+ --------+ --------+ ---------+ -----------+
200 300 400 500 600 700 800 900 1000
FLOW (GEM)
A Concealed Residential
Sprinkler engineered for a
minimum design density
of 0.05 gpni/ft2 with low GPM
requirements.
Features
1. Very low water flow requirements.
2.1/2" (13mm) Total adjustment.
Push-On/Thread-Off
cover attachment option.
Smooth aesthetic ceiling profile.
Available in brass, chrome and
black plated or painted finishes.
Listings & Approval
Listed by Underwriters Laboratories,
and certified by UL for Canada (cULus)
UL Listing Categories
Residential Automatic Sprinklers
UL Guide Number
VKKW
Bulletin 006 Rev.A
Model RFC43 Concealed T.
Residential Sprinkler
(SIN RA0612)
Product Description
Model RFC43 Concealed Residential Sprinklers are fast
response residential fusible solder link automatic sprinklers.
Residential sprinklers differ from standard sprinklers primarily
in their response time and water distribution patterns.
Model RFC43 sprinklers discharge water in a
hemispherical pattern below the sprinkler deflector.
Residential distribution patterns are higher and generally
contain a finer droplet size than standard sprinkler patterns.
The combination of speed of operation and high discharge
pattern required for residential sprinklers has demonstrated,
in fire testing, an ability for controlling residential fires, and
thereby providing significant evacuation time for occupants.
The RFC43 Sprinkler provides the best form of fire
protection by combining an attractive appearance and 1/2'
(13mm) of cover adjustment for ease of installation. The
small diameter cover plate is easily and positively attached
and blends into the ceiling, concealing the most dependable
fire protection available, an automatic sprinkler system.
The RFC43 is a UL Listed Residential Sprinkler to be
installed in the residential portions of any occupancy in
accordance with NFPA 13, 13R, & 13D
The RFC43 can reduce the need for precise cutting of drop
nipples. The threaded cover plate assembly can be adjusted
without tools to fit accurately against the ceiling. The fire
protection system need not be shut down to adjust or remove
the cover plate assembly.
Application and Installation
The RFC43, for residential installations, uses a 165°F (74°C)
fusible solder link in a tuning fork style sprinkler frame with a
drop-down deflector. This assembly is recessed into the
ceiling and concealed by a flat cover plate. The cover plate is
attached to the skirt, using 135°F (57°C) ordinary temperature
classification solder. When the ceiling temperature rises, the
solder holding the cover plate releases the cover allowing the
deflector to drop into position and exposing the sprinkler
Thc Palinhia Aiutnmit, cnrinkIr (n Inr' '2's f'Jrrth tA fliiøctcn tAnuurt \/'rnrn F\ItA, Yrrk 1ncc9
I
-
inside to ceiling temperature. The subsequent operation of
the solder link opens the waterway and causes the deflector
to drop into position to distribute the discharging water in a
hemispherical pattern below the sprinkler deflector. Any
adjustment of thread engagement between the cover plate
and cup will assure that the drop-down deflector is properly
located below the ceiling. The residential distribution pattern
contains a finer droplet size than a standard sprinkler, and the
pattern produces significantly higher wall wetting.
After a 2 5/8 inch diameter hole is cut in the ceiling, the
sprinkler is to be installed with the Model FC Wrench. When
installing a sprinkler, the wrench is first positioned into the
sprinkler/cup assembly and around the hexagonal body of
the sprinkler frame. The Wrench must bottom out against the
cup in order to ensure proper, safe installation. The sprinkler
is then tightened into the pipe fitting. When inserting or
removing the wrench from the sprinkler/cup assembly, care
should be taken to prevent damage to the sprinkler. DO NOT
WRENCH ON ANY OTHER PART OF THE SPRINKLER/CUP
ASSEMBLY. MODEL RFC43 CONCEALED SPRINKLERS
MUST BE INSTALLED ONLY WITH 135°F RATED COVERS.
Cover assemblies provide up to )" (13mm) of adjustment
Turn the cover clockwise until the flange is in contact with the
ceiling. The optional push-on cover plate may require a final
adjusting turn to contact the ceiling. Cover removal requires
turning in the counter-clockwise direction.
In ceilings that have a plenum space above the sprinkler,
the plenum space may have neutral or negative
pressurization but must not be positively pressurized. Inspect
all sprinklers after installation to ensure that the gap between
the cover plate and ceiling and the 4 slots in the cup are all
open and free from any air flow impediment
Temperature Rating
I
Sprinkler Cover Plate
I
Max. Ambient
Tp.
I 165°F/74°C 135°F/57°C 100°F/38°C
Installation Data
Thread Size
inch (mm)
K
Factor
Sprinkler
Spacing
Maximum
Distance
to Wall ft. (m)
Minimum
Distance between
sprinkler ft. (m)
Minimum Required
Sprinkler Discharge
Flow Press.
gpm (Lpm) psi (bar)
/2' (15mm) 4.3 12 x 12(3.6x3.6) 6(1.83) 8(2.43) 12(45) 7.8 (0.54)
½" (15mm) 4.3 14 x 14 (4.3x4.3) 7(2.13) 8(2.43) 13(49) 9.1 (0.63)
Y2" (15mm) 4.3 16 x 16 (4.9x4.9) 8(2.43) 8(2.43) 13(49) 1 9.1 (0.63)
Y2" (15mm) 4.3 18 x 18 (5.5x5.5) 9(2.74) 8(2.43) 18(68)
'(79)
17.5 (1.21)
½"(lSmm) .4.3 20x20(6.0x6.0) 10 (3.05) 8(2.43) 21 23.8(1.64)
Note: 1 bar = 100 Kpa
Model RFC 43 Pendent Flat Concealed installed below Sloped Ceiling.
Technical Data
S
_________
prinkler I coverpF Max.
Thread
Size I.-
Temp. Rating I Temp. rating
I..fkcLI....
Pressure
½"NPT(R½)
Max.: Actual T Sprinkler1
Ambient Temp.
- .
K Factor
(metric (Iqt (SlN)
ax.
IUstment)( Identification
1 3(61.4) __.L._Pf±1,2-
I aDie i - 1kpp11uduu1l
[1 7)ih_
Mm. Flow Per Sprinkler Head Pressure
psi (bar)
IJ.5(
- Max. Slope of Pitch
Max. Sprinkler Spacing Along Slope
(W) Width x ( L) Length ft (m)
12x 12 (3
-
Mm. Flow Per Sprinkler Head
gpm(Lpm)
Pressure
bar
13 49)
13(49) 14 x 14 4.3 x 4,3 1 68 17.5 (1,21)
16x 16(4,9x4,9) .
18 17.5(1,2L. 13(49)
18 x 18 5,5 x 5,5 _j___________ 21(79)
20 x 20 6.1 x 6,1 ___....?1 (79)
2.
Maintenance
Model RFC43 Concealed Sprinklers should be inspected
quarterly and the sprinkler system maintained in accordance
with NFPA 25. Do not clean sprinklers with soap and water,
ammonia or any other cleaning fluids. Remove dust by using
a soft brush or gentle vacuuming. Remove any sprinkler
cover plate assembly which has been painted (other than
factory applied) or damaged in any way. A stock of spare
sprinklers should be maintained to allow quick replacement of
damaged or operated sprinklers. Prior to installation,
sprinklers should be maintained in the original cartons and
packaging until used to minimize the potential for damage to
sprinklers that would cause improper operation or
non-operation.
135°F (570C). Cover plate assembly shall consist of a brass
cover plate and copper alloy retainer flange having a
[thread-on] [push-on] and thread-off design, allowing a 1/2"
cover plate adjustment. Any secure engagement between
the cover plate and the cup will assure that the drop-down
deflector is property located below the ceiling. A plastic
protective cap shall be provided and factory installed inside
the sprinkler cup to protect the drop-down sprinkler deflector
from damage, which could occur during construction before
the cover plate is installed. Standard cover finish: [Chrome]
[White] [Specialty - specify]. Residential concealed sprinklers
shall be Reliable Model RFC43, SIN RA0612 (Bulletin 006).
Id
Model RFC43 Residential Concealed
Sprinkler Specification
Sprinklers shall be cULus Listed low flow residential
concealed sprinklers with drop-down deflector and
adjustable flat cover plate engineered for a minimum design
density of 005 gprrvfl2. Sprinkler frame and deflector shall be
of bronze frame construction having a ½' NPT thread.
Thermal element shall consist of an approved black-painted
beryllium-nickel fusible solder link with symmetric lever
mechanism, maintaining a Teflon-coated Belleville spring
washer and machined brass cap water seal assembly
containing no plastic parts. Sprinkler K-factor shall be nominal
4.3 (62.4), having a 7/16" orifice. Temperature rating shall be
Ordinary 165°F (740C); cover plate temperature rating to be
Ordering Information
Specify:
Sprinkler Model
Cover Plate Finish
Thread-On or
Push-On cover
Cover Plate Finishes n
Standard Finishes
Chrome
White
Special Application Finishes
Bright Brass
Black Plating
Black Paint
Off White
Satin Chrome
" Other colors and finishes
available. Consult factory
for details.
Note: Paint or any other
coatings applied over the
factory finish will void all
approvals and warranties.
112' REDUCING
E
r •. - (66.7mm] 014.
[58.7mm] 014 - HOLE IN CEILING
CUP
- 2 [50.8mm] MAX. IF
FACE OFFflTING TO FACE OF CEILING
-
oh'If7'ISION :
CEILING
°!?±f
UWA
L ._J (,:7mJ -_[;:::J DOON
ASSEM'BL r SPRINKLER
COVER PLATE: 1/2" 112.7mm] ADJUSTMENT
3.
Bulletin 136 Rev.O
11ableo
Model F1 FR
Model FIFR Recessed
Quick Response
Sprinklers
Model Fl FR Sprinkler Types
Standard Upright
Standard Pendent
Conventional
Vertical Sidewall
Horizontal Sidewall
- HSW 1 Deflector
Model Fl FR Recessed Sprinkler Types
Recessed Pendent
Recessed Horizontal Sidewall
- HSW 1 Deflector
Listings & Approvals
Listed by Underwriters Laboratories, Inc. (UL)
Listed by Underwriters Laboratories of Canada (ULC)
Certified by FM Approvals
Loss Prevention Council ([PC, UK)
NYC BS&A No. 587-75-SA
Meets MIL-S-901C and MIL-STD 167-1
Verband der Schadenversicherer (VdS, Germany)
NYC MEA 258-93-E
UL Listing Category
Sprinklers, Automatic & Open
Quick Response Sprinkler
Upright Pendent
Vertical Sidewall Conventional
UL Guide Number
VNIV
Patents: US Patent No. 6,374,920 Applies to
Model F1 FIR Vertical Sidewall Sprinklers.
Product Description
Reliable Models F1FR and F1FR Recessed Sprinklers are
quick response sprinklers which combine the durability of a
standard sprinkler with the attractive low profile of a decorative
sprinkler.
The Models F 1 FR and 'P Recessed automatic spru iklcrs
utilize a 3.0 mm frangible glass bulb. These sprinklers have
demonstrated response times in laboratory tests which are
five to ten times faster than standard response sprinklers This
quick response enables the Model F1FR and F1FR Recessed
sprinklers to apply water to a fire much faster than standard
sprinklers of the same temperature rating.
The glass bulb consists ol an accurately controlled amount
of special fluid hermetically sealed inside a precisely manu-
factured glass capsule this glass bulb is specially con-
structed to provide fast thermal response. The balance of
parts are made of brass, copper and beryllium nickel.
At normal temperatures. the glass bulb contains the Iluid
in both the liquid and vapor phases. The vapor phase can
be seen as a small bubble As heat is applied, the liquid ex-
Horizontal Sidewall Recessed Pendent
HSW 1 Deflector (Model FP Shown)
pands, forcing the bubble smaller and smaller as the liquid
pressure increases. Conti nued heating forces the liquid tO
push Out against the huh causing the glass to siattor
opening the waterway ann allowing the deflector to (J51f'0-
ute the discharging watc:r
Application
Quick response sprurocs are used in fixed lire pro!:'..'
tion systems: Wet, Dry. Deuge or Preaction. Care must no
exercised that the orifice ze. temperature rating, deflector
style and sprinkler type are in accordance with the latest
published standards of the National Fire Protection Aso-
ciation or the approving Authority Having Jurisdiction.
Quick response sprinklers are intended for installation as
specified in NFPA 13. FM Global Loss Prevention Data
Sheet 2-8N or other applicable standards. Quick response
sprinklers and standard response sprinklers should not be
intermixed.
The Reliable Automatic Sprinkler Co., Inc. 103 Fairview Park Drive, Elmsford, New York 10523
Conventional
Model FIFR Quick Response Upright, Pendent & Conventional Sprinklers
Installation Wrench: Model D Sprinkler Wrench
cfIIf1,,i flt
Sprinkler Type
K Factor - - - Sprinkler
Height
Approval
Organization
Sprinkler Identification
Number (SIN)
US Metric
Standard-Upright (SSU) and Pendent (SSP) Deflectors Marked to Indicate Position
) (15mm) Standard Orifice with )" NPT (R/2) Thread 5.6 80 27(56mm) 1,2,3,45.6.7 R3625t
'; (20mm) Large Orifice with ' NPT (R3/4)Thread 8.0 115 2.3" (58mm) 1,2,3,4.7.8 R36220) R3612
(17mm) Small Orifice with , NPT (R.) Thread 4.2 60 2.2"(56mm) 1,2,8 R3623W R3613
3/i" (10mm) Small Orifice with X" NPT (R})Thread 2.8 40 22(56mm) 1,2,8 R362 1W R3611
10mm Orifice XLH with R%"Thread 1 4.2 60 1 56mm 4.6,7 R3624 R3614
Conve ional-Install in Upght 0 Pendent Posion
10mm Orifice XLH With RN Thread 4.2 60 56mm --- R3674
15mm Standard Orifice with ; NPT (R,t') Thread 5.6 80 56mm 4.6,7 R3675
20rnm Large Oriflcewith~" NPT (R34)Thread 8.0 115 58mm 4,7 R3672
Polyester coated uririQht UL and ULC listed corrosion resistant.
Upright Pendent
Model FIFR Quick Response Recessed Pendent Sprinkler
Installation Wrench: Model GFR1 Sprinkler Wrench
Installation Data:
Nominal -
Orifice
Thread
Size
K Factor Sprinkler
Height
Approval"'Sprinkler
Organizations
Identification
Number (SIN) US Metric
(20mm)
NPT (R/2)
" NPT (R3/4)
5.6 80
8.0 115
2.2- (56mm)
2.3" (58mm)
1.2.3.4.5,7.8
1.2,3.8
R3615
R3612
(1 1mm)
Porn
10mcn
." NPT (R'/?) 4.2 . 60
28 40
4.2 60
I 2,2- (56mm) 12.8 83613
R3611
H
83614 - J
NPT (R½) - 1.2.8
[ 56mm 4.7 __________
Refer to escutcheon data table tor approvals and dimensions
'( O -
H- H
I/Nit I'0.4 cAI/....'q(0
socs I -
.cc .,. )
co
1'/JI' O,l. — J6cCO I_f
() Rfi'ft ifi r, & i'i (ccurc,,0'o,t ,.r. i/( foR ,,.PPROtNIS AA10
r'
RIFE" '0 rI £ ¶0)'I'' 3.''J'4"E'C" 4'I'4'JV4j 0vtnS
2.
Vertical Sidewall
US Patent No. 6,374,920
----
4' -.-
4.
Model FIFR Quick Response Vertical Sidewall Sprinkler
Installation Wrench: Model D Sprinkler Wrench
Installation Position: Upright or Pendent
Approval Type: Light Hazard Occupancy
Nominal
Orifice
Thread
Size
K Factor Sprinkler
Height
Approval
Organizations
Sprinkler
Identification
Number (SIN) US Metric
1/2'NPT(R'/2) 5.6 80 2.2" (56mm) 1,2,3,6,8
R3685
15mm 4NPT(RV2) 5.6 80 2.2" (56mm) 4
(1) LPC Approval is for Pendent position only.
Orientation Deflector to Ceiling I Dimension (Mm. - Max.)
Upright 4" - 12 (102mm - 305mm)
Pendent 6" - 12" (152mm - 305mm)
Model FIFR Quick Response Horizontal Sidewall Sprinkler
Deflector: HSW 1
Installation Wrench: Model D Sprinkler Wrench
Installation Data:
Approval Organizations
K Factor and Type of Approval Sprinkler
Nominal Thread Sprinkler Identification
Number (SIN) Light Ordinary
Orifice Size US Metric Length Hazard j Hazard
.1 (15mm) " NPT(RV). 5.6 80 2.63"(67mm) 1,2,3.5,8 1.2.5.8 R35
NOTE: UL. ULC and MEA Listing permits use with F 1 or F2 recessed escutcfleon.
.l OF FIT1iRI TC) ---h
WILL OIMFNS'ON
"OLE 01k
'2 REDUCER
._..J
AY
- 2) 2P 4
-t
- UNTIL OLLAR
1'G'i ,CAlN5r SPRINKLER I
WRENCH BOSS
- 4LJOSTUENT
(I) REFER TO EscurHcEoN DATA TABLE FOR APPROVALS AND 01VEWS10N.
Horizontal Sidewall
3.
Installation . :. ..,
Quick response sprinklers are intended for installation as
specified inNFPA 13, FM Global Loss' Prevention Data Sheet
2-8N or other applicable standards. Quick response sprin-
klers and standard response sprinklers should not be inter-
mixed.
The Model Fl FR Recessed Quick Response Sprinklers are to
be installed as shown. The Model Fl or F2 Escutcheons illus-
trated are the only recessed escutcheons to be used with the
Model Fl FR Sprinklers. The use of any other recessed escutch-
eon will veld all approvals and negate all warranties.
When installing Model F1 FR Sprinklers, use the Model D Sprin-
kler Wrench. When installing Model F1FR Recessed Pendent or
Sidewall Sprinklers, use the Model GFR1 Sprinkler Wrench. Any
other type of wrench may damage these sprinklers.
Glass bulb sprinklers have orange bulb protectors to minimize
bulb damage during shipping, handling and installation. RE-
MOVE THIS PROTECTION AT THE TIME THE SPRINKLER
SYSTEM IS PLACED IN SERVICE FOR FIRE PROTECTION. Re-
moval of the protectors before this time may leave the bulb vul-
nerable to damage. RASCO wrenches are designed to install
sprinklers when covers are in place. REMOVE PROTECTORS
BY UNDOING THE CLASP BY HAND. DO NOT USE TOOLS
TO REMOVE THE PROTECTORS.
Temperature Ratings
Classification
Sprinkler
Tern rature Max. Ambient
Temp.
Bulb
color -- c E
Ordinary 57 135 1°F(38"C) Orange
Ordinary 68 155 100°F(38c) Red
Intermediate 79 175 150-F (66-C) Yellow
Intermediate 93 200 150-F (66-C) Green
High 141 266 225°F(107°C) Blue
P1 Not available for recessed sprinklers.
Escutcheon Data
Escutcheon 'A" Face of Fitting
Model Approvals i54tIment DSkX to Ceding or
Wad Den
Fl 1.2.4,8 Max Recess (38.1mm)
Min Recess 3/" (5mm-24rni)
(19.1mm)
ty'
F2 1,2,3,4.5, 7.8 Max Recess (38.1mm) ;6-- 16
Min Recess 3/6 (&nm - l7rrrn)
(24mm)
FP 1.2 Max Recessed lç(38.1mm)
______ _______ (11mm) _______ Push 5/ ' Thread-off 1,2 Mm Recessed '6 1.4rriii)
__
No Dimensional Figure for EP
Maintenance
The Models F1FR and F1FR Recessed Sprinklers
should be inspected quarterly and the sprinkler system
maintained in accordance with NFPA 25. Do not clean
sprinklers with soap and water, ammonia or any other
cleaning fluids. Remove dust by using a soft brush or gen-
tle vacuuming. Remove any. sprinkler which has been
painted (other than factory applied) or damaged in any
way. A stock of spare sprinklers should be maintained to
allow quick replacement of damaged or operated sprin-
klers. Prior to installation, sprinklers should be maintained
in the original cartons and packaging until used to mini-
mize the potential for damage to sprinklers that would
cause improper operation or non-operation.
Sprinkler Types
Standard Upright
Standard Pendent
Conventional
Sidewall (Vertical, Horizontal HSW1)
Recessed Pendent
Recessed Horizontal Sidewall HSW'I
Finishes (11 (21
Standard Finishes
Sprinkler Escutcheon
Bronze Brass
Chrome Plated Chrome Plated (3)
White Polyester Coated (4) White Painted
Special Application Finishes
Sprinkler Escutcheon
Bright Brass Bright Brass
Black Plated Black Plated
Black Paint Black Paint
011 White Ott White
Satin Chrome Satin Chrome
(1) Other finishes and colors are available on special order.
Consult the factory for details.
121 FM Approvals is limited to bronze and brass, chrome or black
plated finishes only.
(3) FP Push -on/Thread-off escutcheon.
(3) UL and ULC listed corrosion resistance.
SIN numbers: R362 1. R3622, R3623. R3625.
Note: For ,3'" orifice pendent FM approved white
polyester coated and UL approved white polyester
corrosion resistant sprinklers refer to Bulletin 014.
Ordering Information
Specify:
Sprinkler Model
Sprinkler Type
Orifice Size
Deflector Type
Temperature Rating
Sprinkler Finish
Escutcheon Type
Escutcheon Finish (where applicable)
Note: When Model F1FR Recessed sprinklers are
ordered, the sprinklers and escutcheons are packaged
separately.
The equipment presented in iNs bulletin is lobe installed in accordance with the latest pertinent Standards of the National Fire Protection Association. Factory Mutual Research
Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances wh000vcr applicable
Products manufactured and distributed by Reliable have been protecting fife and property for over 80 years. and are installed and serviced by the most highly qualified and reputa-
ble sprinkler contractors located throughout the united States. Canada and foreign countries. -- --
Manufactured by
Reliabld
The Reliable Automatic Sprinkler Co., Inc.
(800)431-1588 Sales Offices
(800)848.6051 Sates Fax
(914)829-2042 Corporate Offices
ww.re4iabspei'ikle(.c6Yt1 Internet Address
i: Rocydcii /Papw
Revision lines indicate updated or new data
CC Pnritect in USA 3,07 P,N9999970027
Upright
Vertical Sidewall
Pendent
Conventional
n liabl
The Designer® Model Fl Sprinkler
Standard Upright
Standard Pendent
Extended Coverage Pendent
Conventional
Vertical Sidewall
Horizontal Sidewall
- HSW1 Deflector
The Designer®ll Model Fl Recessed Sprinkler
Recessed Pendent
Recessed Extended Coverage Pendent
Approval Organizations
Underwriters Laboratories Inc.
Underwriters' Laboratories of Canada
Factory Mutual Research Corp.
Loss Prevention Council
NYC BS&A No. 587-75-SA
Pleniere Assemblee
Verband der Schadenversicherer
NYC MEA 258-93-E
UL Listing Category
Sprinklers, Automatic & Open (VNlV)
Patents: U.S. Patent No. 6,374,92
Applies to Model Fl Vertical Sidewall Sprinklers.
Product Description
The El Glass Bulb Sprinkler combines the durability
of a standard sprinkler with the attractive low prof le of
a decorative sprinkler. Whether installed on exposed
piping or in an office ceiling, It is functional and
attractive. The Horizontal and Vertical SidewaH
Sprinklers provide an equally attractive appearance
when ceiling piping cannot be used.
Beautifully versatile is the description for the Reliable
Model Fl Recessed Designer glass bulb sprinkler.
Recessing The Designer® enhances its already low
profile decorative appearance, and facilitates a rapc
and perfect installation.
Model El Recessed Designers escutcheon is highly
adjustable. The two piece construction makes field
installation a very easy and rapid task. This also allows
ceiling panels to later be removed without shutting
down the fire protection system, thus facilitating
maintenance of above ceiling services.
The Designer® Automatic Sprinkler utilizes a frangible
glass bulb. The glass bulb consists of an accurately
controlled amount of special fluid hermetically sealed
inside of a precisely manufactured glass capsule. This
glass bulb is specially constructed to provide fast
thermal response.
Bulletin 117 Ray.S
Model Fl
Model Fl Recessed
Standard Response
Sprinklers
Horizontal Sidewall Recessed Pendent
_
"[I
Extended Coverage Recessed Extended
Pendent Coverage Pendent
At normal temperatures, the glass bulb contains (ho
fluid in both the liquid phase and in the vapor phase
The vapor phase can be seen as a small bubble As
heat is applied, the liquid expands forcing the bubble
smaller and smaller as the liquid pressure increases
Continued heating forces the liquid to push out against
the bulb, causing the glass to shatter, opening the
waterway and allowing the deflector to distribute the
discharging water.
The Fl Sprinkler temperature rating is identified by
the color of the glass bulb capsule as well as frame
color where applicable.
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York, 10523
a
-S
Model Fl Upright, Pendent & Conventional Sprinklers
Installation Wrench: Model 0 Sprinkler Wrench
Upright Pendent Conventional
Installation Data:
Sprinkler Identification Numbers
Nominal Nominal K Factor Sprinkler Approval
Orifice Thread Size :-i Height Organization
US Metric Upnght Pendent -
Standard-Upright (SSU) and pondont Deflectors Marked to Indicate Position
56 80 1234567 R17254 01715 '15mm)
17/32' 1W NPT 80 115 1,2.3.4.7,8
—
01722"' 01712
(0(flffl) — -
56 80 (15mm)m - (R 2) --- (56mm) - ----------------------
1 7!32 NOT 80 1 (20mmY (83/4)
7/16'7, rsipl 42 130 22 -- - 1 28 01723' ii '13
(11mm) (R1/2) 56mm) --
28 -40 - 1.28
- -------------- --
10mmXLH 03/8 4.2 60 56 lfliifl 4.6.7 01724 01714
Convenncnai - I oman in Uprqnl or -'rriideol Position
0mrnXLH 03/8 4 2 60 561mm 01774
5mm NPT 5.6 80 SIt 1rem 467 01775
20mm 80 115 58 lOin 4 7 . 01772
LPC Approval up to 286°F (141°C)
FM Approval for SSU up to and including 200°F (93°C) only.
(F1S5) VdS Approval for Intermediate Response 155°F (68°C) only
Polycoated upright UL and ULC listed corrosion resistant.
2.
Model Fl Recessed Pendent Sprinkler
Installation Wrench: Model GFR1 Sprinkler Wrench
- 2 1/4' HOLE ON.—
I I5/I6 014
(492nmJ
- $ r I/i RL0L11R
TURN COLLAR — [234nm X 127-1
UNTiL T$CJIT
AGAINST SPRINKLER
*1RuNCH BOSS
L J I
314' ADJUSTMENT
1 ':
II7TGOIA 227/32 O'&
(7z2,)
I VI IUl It
(1) When installed directly into a tee, the escutcheon dimensions
adjustment will be reduced.
Installation Data:
NaI
Orifice ht Thread S
-
.
Nominal
us
K Factor
Metric
Sprinkler Heig Organization
Approval
1.2,3,4.5.7
Sprinkler on
Numbers (SIN)
R 1715 (15mm) 56 1 80
17/32" 314• NPT 80.
115 2.3' 1,2.3.4.8 (58mm) p1712 (20mm) (P3/4)
VY
(15mm)"1
½" NPT
(P1/2) 56) 80 (56mm)
2.2" 7
17/32 1/4" NPT 80 115 2.3'
(R3/4) .L ..............
7/16' 1/2' NPT 42 2.2' 128 P1713
.._!?L_ _.._L1
3/8'
(10mm)
/1 NPT
(R1/2) 28 . 0 2.2"
(56mm) L..... 1,2.8 1711
10mm P3/8 42 60 56.1mm 4.7 01714
(2) FM Approval
Light Hazard - No Limitations
Ordinary Hazard - Groups 1 & 2, Wet Systems only.
LPC Approval is for 57°C through 93°C ratings.
VdS Approval for Intermediate Response 155F (68°C) only.
CI
Model Fl Vertical Sidewall Sprinkler
Installation Wrench: Model 0 Sprinkler Wrench
Installation Position: Upright or Pendent
Approval Type: Light Hazard Occupancy
U.S. Patent No. 6,374,920
Sprinkler Type Deflector o Ceiling Distance
Pendent 4 (102mm) - 12 (305mm)
Vertical Sidewall
Installation Data:
Nominal K Factor . Sprinkler Sprnkler Approval
Nominal Orifice Thread Size US Height Organizations kientification
Metric Numbers (SIN)
/2(15mm) V NPT (P1/2) 5.6 j 8.0 1 2.2' (56.1mm) 1.2,3.46,8 P1785
(1) LPC Approval is pendent only, 57°C through 141°C ratings.
Model Fl Horizontal Sidewall Sprinkler
Deflector: HSW 1
Installation Wrench: Model D Sprinkler Wrench
Horizontal Sidewall
Installation Data:
Nominal K Factor Approval Organizations Sprinkler
Nominal .............................. 'H Sprinkler ......--.-- ...................
Thread i Ordinary identification S
,
Office us ' Metric I Height Light Hazard Hazard Numbers (SIN)
/(i5mm) 5.6 80 2.6Y(67mm) 1,2,3.5 1.2,5(R 112p) i . P1735
Note: UL and ULC Listing permits use with Fl escutcheons, light hazard only.
4.
Model Fl Extended Coverage Pendent Sprinkler
Deflector: EC Pendent
Installation Wrench: Model D Sprinkler Wrench
Approval Type: Extended Coverage - Light Hazard Occupancy
Coverage Area
Pressure
Flow Rate Width x Length
Max. Area Nominal
K=8.0 (115) K=5.6 (80)
psi bar I psi bar ftxft7mxm
26 98.4 10.6 I 0,7 I 21.6 . 1,5 16 x 16 4.9 x 4.9
33 125.0 17.0 I 1,2 I 34.7 2.4 18 x 18 I 5.5 x 5.5
40 151.4 1 25,0 1,7 51.0 3,5 1 20x20 60x60
Installation Data:
PI
Extended Coverage Pendent
Nominal Thread
Orifice Size
Nominal K Factor Sprinkler
Height
Approval .
_Temperature
Organizations OF
Rating Sprinkler
OC Numbers US
-
Metric
_...L_ _.1_ m ffL 1.2.8 57.68 R1742
5.6 1,2,8 135. 155 57, 68 Ri 745 '/2' (15mm) 80 2.2 (56mm)
Model Fl Recessed Extended Coverage Pendent Sprinkler
Deflector: [C Pendent
Installation Wrench: Model GFR1 Sprinkler Wrench
Approval Type Extended Coverage Light Hazard Occupancy -
Extended Coverage
Recessed (1) When nstalled directly into a toe, the escutcheon
dmension's adjustment will be reduced.
Coverage Area
Pressure
Max. Area Flow Rate Nominal
.'
Width xLength
K=8.O (115) K=5.6 (80)
gprn Urnin psL 'f bar - psi , bar , ft. xft. rnxrn
26 . 984 10.6 0.7 216 1.5 16 16 49 x 49
33 1250 170 1,2 347 24 18x18 ' 55x55
40 1514 25.0 1.7 510 3 20x20 6.0x60
lntIItinn r-lintq.
Nominal Thread Nominal K Fact Sprinkler Approval .
Temperature Rating Sprinkler
Identification
Orifice . Size
-
Metric US
NPT
Height Organizations F "C j_Numbers (SIN)
(R3/4) 17/32' 3/V
. 2256mm 1.2,8 5155 57.68 P1742
--- L20mm)
5.6 W (15mm) 80 2 2' (56mm) 1.2.8 135.155 57.68 Ri 745
5.
Model Fl & Fl Recessed Sprinklers
Application
Model Fl and Fl Recessed sprinklers are used in
fixed fire protection systems: Wet, Dry, Deluge or
Preaction. Care must exercised that the orifice size,
temperature rating, deflector style and sprinkler type
are in accordance with the latest published standards
of the National Fire Protection Association or the
approving Authority Having Jurisdiction.
Installation
Model Fl sprinklers are standard response sprinklers
intended for installation as specified in NFPA 13. They
must also be installed with the Model D Sprinkler
Wrench specifically designed by Reliable for use with
these sprinklers.
The Model Fl Recessed Sprinklers are to be installed
with a maximum recess of 3/4 inch (19mm). The Model
El Escutcheon illustrated is the only recessed
escutcheon to be used with the Model Fl Pendent and
EC Sprinklers. The use of any other recessed
escutcheon will void all approvals and negate all
warranties. When installing Model Fl Recessed
Pendent and EC Pendent Sprinklers, use the Model
GFR1 Sprinkler Wrench. Any other type of wrench may
damage these sprinklers.
Glass bulb sprinklers have orange covers to protect
the bulb during the installation process. REMOVE THIS
PROTECTION ONLY AFTER THE SYSTEM HAS BEEN
HYDROSTATICALLY TESTED AND, WHEN APPLICABLE,
THE ESCUTCHEONS HAVE BEEN INSTALLED. RASCO
wrenches are designed to install sprinklers when
covers are in place.
Maintenance
The Models Fl and Fl Recessed Sprinklers should
be inspected quarterly and the sprinkler system
maintained in accordance with NFPA 25. Do not clean
sprinklers with soap and water, ammonia or any other
cleaning fluid. Remove any sprinkler which has been
painted (other than factory applied) or damaged in any
way. A stock of spare sprinklers should be maintained
to allow quick replacement of damaged or operated
sprinklers. Prior to installation, sprinklers should be
maintained in the original cartons and packaging until
used to minimize the potential for damage to sprinklers
that would cause improper operation or non-operation.
Ordering Information
Specify:
Sprinkler Model
Sprinkler Type
Orifice Size
Deflector Type
Temperature Rating
Sprinkler Finish
Escutcheon Finish (where applicable)
Temperature Ratings
Classification
Sprinkler
Temperature
Maximum
Ambient
Temperature Bulb
Color
° 1_°c °F Ic
Ordinary 135 1 57 100 38 Orange
Ordinary 155 68 100 38 Red
intermediate 175 79 150 66 Yellow
intermediate 200 93 150 66 Green
High 1 286 141 225 107 1 Blue
Extra High1'1 1 360 1 182 300 1 149 1 Mauve
(1) Not Available for Fl Recessed
Patents: U.S. Patent No. 6,374,920
Applies to Model Fl Vertical Sidewall Sprinklers.
Finishes
Standard Finishes
Sprinkler Escutcheon
Bronze Brass
Chrome chrome
White Polyester Coated(3)11) - White Painted
Special Application Finishes
Sprinkler - Escutcheon
8ng10 Brass"' Bright Brass
Biack Plated Biack Plated
Biack Paint°1 Black Paint
Off While` Off White
Satin Chrome Satin Chrome
Lead Platcd°341
Wax Coated"""'
Wax Over Lead13 4X5)
Other colors and finishes are available on special order, Consult
factory for details.
200°F (93°C) maximum.
UL and ULC listed, and NYC approved only.
155°F to 200°F (68°C to 93°C) ratings only.
286°F (141,C) sprinklers may be coated for ambient conditions not
exceeding 150°F (66°C).
UL and ULC listed corrosion resistant SIN numbers R1721, R1722,
P1723 and P1725.
Note: For 1/2 orifice pendent FM approved white
polyester coated and UL approved white polyester
corrosion resistant sprinklers refer to Bulletin 013.
The eQuipment presented in this bulletin is to be installed in accordance with the latest pertinent Standards of the National Fire Protection Association,
Factory Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever
applicable.
Products manufactured and distributed by Reliable have been protecting life and property for over 80 years, and are installed and serviced by the most
highly qualified and reputable sprinkler contractors located throughout the United States, Canada and foreign countries.
Manufactured by
The Reliable Automatic Sprinkler Co., Inc. # Recycled Paper
fleliablim (800) 431-1588 Sales Offices
(914) 829-2042 Corporate Offices
(800) 848-6051 Sales Fax Revision lines indicate updated or new data
w.reFabiesprinkier.com Internet Address E.G. Printed in U.S .A. 3,107 P/N 9999970011