HomeMy WebLinkAbout6186 INNOVATION WAY; ; AS110168; Permit9/14/22,11:13 AM AS110168 Permit Data
City of Carlsbad
Sprinkler Permit
6186 INNOVATION
Job Address:
WY
Permit Type: SPRINK
Parcel No: 2132621414
Lot #: 0
Permit No: AS110168
Status: PENDING
Applied 11/3/2011
Approved: 11/12/2011
Reference No.: Issued: 11/12/2011
PC #: Inspector:
Project Title: FERRANTE/BRANT FIRE SPRINKLER T.I.
Applicant:
WESTERN FIRE PROTECTION
13630 DANIELSON
P0 WAY CA
858-513-4949
Owner:
PALOMAR AIRPORT ROAD LLC
C/O RYAN CO US INC/M JINDRA
50 S 10TH ST #300
MINNEAPOLIS MN
Fees ($) Add'I Fees ($) Total ($) Balance ($)
262 0 262 0
about:blank 1/1
QUICK RESPONSE
RECESSED PENDENT
QUICK RESPONSE
RECESSED
HORIZONTAL SIDEWALL
I gal
FIRE SPRINKLER CORPORATION
ASllof(,?
QUICK RESPONSE
A UTOMA TI C SPRINKLERS
GL SERIES
RECESSED PENDENT
RECESSED HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
The Globe Quick Response GL Series Sprinkler is a low profile
yet durable design which utilizes a 3mm frangible glass ampule as
the thermosensitive element. This provides sprinkler operation
approximately six times faster than ordinary sprinklers. While the
Quick Response Sprnkler provides an aesthetically pleasing ap-
pearance, it can be installed wherever standard spray sprinklers
are specified but offers the additional feature of greatly increased
safety to life. Quick Response Sprinklers should be used advisedly
and underthe direction of approving authorities having jurisdiction.
The heart of Globe's GL Series sprinkler proven actuating"
assembly is a hermetically sealed frangible glass ampule that
contains a precisely measured amount of fluid. When heat is
absorbed, the liquid within the bulb expands increasing the internal
pressure. At the prescribed temperature the internal pressure
within the ampule exceeds the strength of the glass causing the
glass to shatter. This results in water discharge which is distributed
in an approved pattern depending upon the deflector style used.
The sprinkler and escutcheon are not factory assembled.
Assembly is done in the field.
TECHNICAL DATA
*See reverse side for Approvals and Specifications.
*Temperature Ratings - 135°F (57°C), 155°F (68°C), 175°F
(79°C), 200°F (93°C), 286°F (141°C).
Water Working Pressure Rating -175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
a Maximum low temperature glass bulb rating is -67°F (-55°C).
° Frame - bronze • Deflector - brass • Screw - brass
Bulb seat - copper a Spring - nickel alloy • Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Escutcheon Assembly - steel
.cPRINKLFR TFMPFRATURE RATING/CLASSIFICATION and COLOR CODING
AVAILABLE SPRINKLER BULB N.F.P.A. MAXIMUM CLASSIFICATION TEMPERATURES COLOR CEILING TEMPERATURE
ORDINARY 135 F/155°FF. 57°C/68°C 1 ORANGE/RED 1.O0F 3C
INTERMEDIATE 175F/200F. 9Ci93°C IYELLOW/GREEN 15017 66°C
HIGH 286 F 1,41-C BLUE 225-1` 107 C 41
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583 • FAX989-846-9231
DECEMBER 2006 A-24 BULLETIN GL2801, REV. #5
4
QUICK RESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
RECESSED PENDENT
RECESSED HORIZONTAL SIDEWALL
SPECIFICATIONS
NOMINAL "K" FACTOR THREAD SIZE LENGTH ' FINISHES
2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze
4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm) Satin Chrome 2
Bright Chrome
5.6 (80 metric) 1/2" NPT 2 1/4' (5.7 cm) White Polyester
7.8 (111 metric) 1/2" NPT 2 1/4" (5.7 cm) Black Polyester
8.1 (116 metric) 3/4' NPT 2 7/16" (6.2 cm) Lead Coated 2
NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 'HORIZONTAL SIDEWALL IS 29/16".
2 FINISHES AVAILABLE ON SPECIAL ORDER.
3C-UL LISTED CORROSION RESISTANT -
POLYESTER MUST BE SPECIFIED ON ORDER.
APPROVALS
STYLE SIN
MODEL
K
FACTOR
135°F
57°C
155°F
68°C
175°F
79°C
200°F
93°C
2*286F
141°C
t
cULus FM LPC CE NYC - DOB
MEA101-92-E
GL2801 2.8 X X X X X X - - - x
GL4201 4.2 X X X X X X - - - X
PENDENT GL5601 5.6 X X X X X X X X X X RECESSED
GL8101 7.8° X X X X X X X - - X
GL8106 8.1 X X X X X X X X X X
GL2826 2.8 X X X X X X - - - X
HORIZONTAL 0L4226 4.2 X X X X X X - - - x
SIDEWALL
RECESSED § GL5626 5.6 X X X X X X - - - x
GL8127 8.1 X X X X X X - - - -
§HONIZONUAL SIL)WALLCULuS LISlU bUI< L)P-LLI0l< 4 10 1 dIL0W I ht LIlLlN1..
t5.6K ORIFICE, 7.8K ORIFICE AND 8.1K ORIFICE LISTED FOR ALL HAZARDS.
CROSS SECTIONS ""286°F cULus LISTED ONLY.
2 15/IC 22.
V 212. MIII.
I 20/32. 02. 1 2 1/2
RETMIICR
t t 1/2° RECESSED ESCUTCHEONS ARE REQUIRED FOR FM APPROVED SPRINKLERS.
ORDERING INFORMATION
SPECIFY
Quantity • Model Number • Style
Orifice • Thread Sizes • Temperature
Finishes desired
Quantity - Recessed Wrenches - P/N 325391 (1/2);
PIN 325401, Rev. F (L.O.)
Quantity - Protective Caps - P/N 327109-CAP
(Friction Fit Recessed)
GLOBE® PRODUCT WARRANTY
Globe agrees to repair or replace any of its own
manufactured products found to be defective in material
or workmanship for a period of one year from date of
3/4- shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
4077AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583 FAX 989-846-9231
1-800-248-0278 www.globesprinkIer.com
DECEMBER 2006 PRINTEDU.S.A. BULLETIN GI-2801, REV. #5
DL
-
umum S)
FIRE SPRINKLER CORPORATION
DESCRIPTION AND OPERATION
"THE INCH"
QUICK RESPONSE
A UTOMA TIC SPRINKLERS
MODEL GL5606
ONE INCH ADJUSTABLE
CONCEALED PENDENT
The Globe Quick Response GL5606 Adjustable Concealed Pendent Sprinkler has a low profile,
aesthetically pleasing design. It provides sprinkler operation approximately six times faster than
ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are
specified when allowed by the applicable standards. It offers the additional feature of greatly
increased safety to life and should be used advisedly and under the direction of approving
authorities having jurisdiction. The sprinkler is available with a nominal 1" of adjustment and a low
profile cover plate assembly. All that is seen at the ceiling is a 3 5/16" diameter ceiling plate or an
optional 21/4" diameter ceiling plate color finished to match the specifier's exact requirements. The
GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the "smooth flow"
of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangible glass ampule which is located
above the ceiling and concealed from view by the ceiling plate.
The provided protective cap needs to be removed in order to install the sprinkler with the proper
wrench. The protective cap must be replaced on the sprinkler until the time the cover plate is to be
installed. The "push on - screw off' designed cover plate is easily installed and with a nominal 1"
inch of adjustment makes it easier to get a proper fit at the ceiling.
Operation of the sprinkler occurs when heat build up causes the solder holding the cover plate
to the support shell to melt allowing the cover plate to fall clear. Continued heat build up causes
the 3mm glass bulb to burst allowing the defiectorto drop down and distribute water in an approved
pattern to extinguish or control the fire.
TECHNICAL DATA
0 See reverse side for Approvals and Specifications.
Temperature Ratings -
135°F (57°C) Sprinkler, 135°F (57°C) Cover Plate;
155°F (68°C) Sprinkler, 135°F (57°C) Cover Plate;
155°F (68°C) Sprinkler, 155°F (68°C) Cover Plate;
175°F (79°C) Sprinkler, 155°F (68°C) Cover Plate;
200°F (93°C) Sprinkler, 155°F (68°C) Cover Plate.
0 Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67°F (-55°C)
Frame - bronze • Deflector - brass o Screw - brass
Bulb seat - brass • Spring - nickel alloy • Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
a Drop Pin - stainless steel
Cover Plate - brass
3 5/16" diameter plate
C T)
2 3/4" diameter plate
QUICK RESPONSE
WHITE ADJUSTABLE
CONCEALED PENDENT
*Upper Escutcheon Assembly - plated steel.
NOTE: Globe's wrench P/N 332765 must be used to install this sprinkler.
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
AVAILABLE BULB N.F.P.A. MAXIMUM CEILING CLASSIFICATION SPRINKLER TEMPERATURES COLOR TEMPERATURE
ORDINARY 135'F/155'F 57'C/68'C ORANGE/RED 1 00 F 38'C
INTERMEDIATE 175'F/200'F 79'C/93'C YELLOW/GREEN 150'F 66 C
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 (989) 846-4583 e FAX 989-846-9231
JULY 2009 A-38 BULLETIN GL5606 REV#5
QUICK RESPONSE
A UTOMA TIC SPRINKLERS
MODEL GL5606
ADJUSTABLE CONCEALED PENDENT
SPECIFICATIONS
NOMINAL "K FACTOR THREAD SIZE LENGTH FINISHES
5.6 (80 metric) 1/2" NPT 2 1/2' (6.4 cm) Bright Chrome
White Painted
NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 'FINISHES AVAILABLE ON SPECIAL ORDER.
APPRIVAL.c
SIN K 135°F (57°C) 1155-I'(68-C) 155°F (68°C) 175°F (79°C) 200°F (93°C) NYC-DOB STYLE MODEL FACTOR with plate with plate with plate with plate with plate cULus FM MEA1OI-92-E 135°F (57°c) 135°F (57°C) 155°F (68°C) 155°F (68°c) 155°F (68°C)
Adjustable
Concealed 5L5606 5.6 X X X X X X X X
Pendent
*FM APPROVED AS STANDARD RESPONSE CROSS SECTION
I/2
REDUCER
2 1/4 lILA. MIN.
HOLE IN CEILING
-I 7/R-lILA.
DROP PIN
CEILING COVER
2 3/4 MAX.
I 718 lilA.
OPTIONAL COVER WHITE 135°F WHITE 155°F CHROME 135°F CHROME 155°F
PLATE SIZE PART# PART# PART III PART#
2 3/4° 332726 332731 332724 332729
3 5/16° 332706 332711 332704 332709
ORDERING INFORMATION
SPECIFY
"Quantity • Model Number Style
"Orifice • Thread Sizes Temperature
Finishes desired
Quantity - Adjustable Concealed Wrenches -
P/N 332765
9&4OTa~1Z
FIRE SPRINKLER CORPORATION
JULY2009
GLOBE® PRODUCT WARRANTY
Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583 FAX 989-846-9231
1-800-248-0278 www.globesprinkler.com
PRINTED U.S.A. BULLETIN GL5606 REV#5