HomeMy WebLinkAbout2198 PALOMAR AIRPORT RD; ; AS090118; Permit12/28/2020 AS090118 Permit Data
City of Carlsbad
Sprinkler Permit
Permit No: AS090118
2198 PALOMAR
Job Address: Status: ISSUED
AIRPORT RD
Permit Type: SPRINK Applied 9/16/2009
Parcel No: 7602211800 Approved: 8/16/2009
Lot #: 0
Reference No.: Issued: 8/16/2009
PC #: Inspector:
Project Title: LANDINGS RESTAURANT T.I. FIRE SPRINKLER PLAN CHECK &
INSPECTIONS
Applicant: Owner:
AVIS RENT A CAR SYSTEM INC
C/O ARC DEPT
6 SYLVAN WAY
PARSIPPANY NJ
Fees ($) Add'I Fees ($) Total ($) Balance ($)
130 0 130 0
1/1
QUICK RESPONSE
RECESSED PENDENT
QUICK RESPONSE
RECESSED
HORIZONTAL SIDEWALL
Asoqon
QUICK RESPONSE
A UTOMA TIC SPRINKLERS
GL SERIES
RECESSED PENDENT
RECESSED HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
The Globe Quick Response GL Series Sprinkler is a low profile
yet durable design which utilizes a 3mm frangible glass ampule as
the thermosensitive element. This provides sprinkler operation
approximately six times faster than ordinary sprinklers. While the
Quick Response Sprinkler provides an aesthetically pleasing ap-
pearance, it can be installed wherever standard spray sprinklers
are specified but offers the additional feature of greatly increased
safety to life. Quick Response Sprinklers should be used advisedly
and under the direction of approving authorities having jurisdiction.
The heart of Globe's GL Series sprinkler proven actuating
assembly is a hermetically sealed frangible glass ampule that
contains a precisely measured amount of fluid. When heat is
absorbed, the liquid within the bulb expands increasing the internal
pressure. At the prescribed temperature the internal pressure
within the ampule exceeds the strength of the glass causing the
glass to shatter. This results in water discharge which is distributed
in an approved pattern depending upon the deflector style used.
The sprinkler and escutcheon are not factory assembled.
Assembly is done in the field.
TECHNICAL DATA
'See reverse side for Approvals and Specifications.
'Temperature Ratings - 135°F (57°C), 155°F (68°C), 175°F
(79°C), 200°F (930C), 286°F (141°C).
'Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67°F (-55°C).
'Frame - bronze • Deflector - brass • Screw - brass
'Bulb seat - copper ' Spring - nickel alloy o Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Escutcheon Assembly - steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
AVAILABLE SPRINKLER BULB N.F.P.A. MAXIMUM CLASSIFICATION TEMPERATURES COLOR CEILING TEMPERATURE
ORDINARY 135°F1155°F 57 (!/68 C ORANGE/RED 4100°F -3 C
INTERMEDIATE 175,F/200 F 79 CI93C YELLOW/GREEN 150°F 66 ,C
HIGH 286F / 141 C BLUE 225°F 'io, C
4U77AIRPARKDRIVE, STANDISH, MICHIGAN 48658 989-846-4583 u FAX 989-846-9231
DECEMBER 2006 A-24 BULLETIN GL2801, REV. #5
QUICK RESPONSE
A UTOMA TIC SPRINKLERS
GL SERIES
RECESSED PENDENT
RECESSED HORIZONTAL SIDEWALL
SPECIFICATIONS
NOMINAL "K FACTOR THREAD SIZE LENGTH FINISHES
2.8 (39 metric) 1/2" NPT 2 1/4' (5.7 cm) Factory Bronze
4.2 (59 metric) 112' NPT 2 1/4" (5.7 cm) Satin Chrome 2 Bright Chrome 5.6 (80 metric) 112' NPT 2 1/4' (5.7 cm) white Polyester
7.8 (111 metric) 1/2" NPT 2 1/4" (5.7 cm) Black Polyester
8.1 (116 metric) 3/4" NPT 2 7/16" (6.2 cm) Lead Coated 2
NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 1 HORIZONTAL SIDEWALL IS 2 9/16'.
2 FINISHES AVAILABLE ON SPECIAL ORDER.
3C-UL LISTED CORROSION RESISTANT -
POLYESTER MUST BE SPECIFIED ON ORDER.
APPROVALS
STYLE SIN
MODEL
K
FACTOR
135°F
57°C
155°F
68°C
175°F
79°C
200°F
93°C
°°286°F
141°C cULus FM LPC CE NYC - DOB
MEAIOI-92-E
GL2801 2.8 X X X X X X - - - X
GL4201 4.2 X X X X X X - - - X PENDENT GL5601 5.6 X X X X X X X X X X RECESSED
GL8101 7.8° X X X X X X X - - X
GL8106 8.1 1 X X X X X X X X X X
GL2826 2.8 X X X X X X - - - X HORIZONTAL GL4226 4.2 X X X X X X - - - X SIDEWALL - RECESSED § GL5626 5.6 X X X X X X - - - X
GL8127 8.1 X X X X X X - - - -
§ HORIZONTAL SIDEWALL cULus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING.
t5.61< ORIFICE, 7.8K ORIFICE AND 8.1K ORIFICE LISTED FOR ALL HAZARDS.
C * 7.8KX 112" NPT. ROSS ECTIONS °°286°F cULus LISTED ONLY.
*tl.'l*IR
*EDUCEP
t t 1/2" RECESSED ESCUTCHEONS ARE REQUIRED FOR FM APPROVED SPRINKLERS.
ORDERING INFORMATION
SPECIFY
Quantity • Model Number • Style
Orifice • Thread Sizes • Temperature
° Finishes desired
Quantity - Recessed Wrenches - P/N 325391 (1/2");
P/N 325401, Rev. F (L.O.)
Quantity - Protective Caps - PIN 327109-CAP
\ J (Friction Fit Recessed)
PENDENT
1 11 FDi
GL HORIZONTAL 613E SIDEWALL
FIRE SPRINKLER CORPORATION
GLOBE@ PRODUCT WARRANTY
Globe agrees to repair or replace any of its own
manufactured products found to be defective in material
or workmanship for a period of one year from date of
shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
4O77AIRPARKDRIVE, STANDISH, MICHIGAN 48658
989-846-4583 FAX 989-846-9231
1-800-248-0278 www.gIobesprinkler.com
DECEMBER 2006 PRINTED U.S.A. BULLETIN GI-2801, REV. #5
QUICK RESPONSE
WHITE
CONCEALED PENDENT
QUICK RESPONSE LOB A UTOMA TIC SPRINKLERS
FIRE SPRINKLER GL SERIES
CORPORATION CONCEALED PENDENT
DESCRIPTION AND OPERATION
The Globe Quick Response GL Series Concealed Pendent Sprinkler is a low profile, aestheti-
cally pleasing design. It provides sprinkler operation approximately six times faster than ordinary
sprinklers and can be installed wherever standard concealed spray sprinklers are specified when
allowed by the applicable standards. It offers the additional feature of greatly increased safety to
life and should be used advisedly and under the direction of approving authorities having
jurisdiction. The Sprinkler is available with 1/8" adjustment and a low profile cover plate assembly.
All that is seen at the ceiling is a 35/16" diameter ceiling plate color finished to match the specifier's
exact requirements. The GL Series Concealed Sprinkler maybe virtually invisible as it does not
interrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangible
glass ampule type sprinkler which is located above the ceiling and concealed from view by the
ceiling plate. The ceiling plate is soldered to the sprinkler's special upper support assembly in three
places. Upon the application of sufficient heat, the plate falls to the floor exposing the quick
response pendent spray sprinkler. At the ampule's rated temperature, the sprinkler opens
discharging water onto the floor in its required and approved distribution pattern.
A special spring is attached to the pendent sprinkler deflector that serves to provide a constant
tension against the ceiling plate. This feature virtually ensures freedom from environmental
vibration probIes.
TECHNICAL DATA
'See reverse slide for Approvals and Specifications.
'Temperature Ratings -
135°F (57°C) Sprinkler, 135°F (57°C) Cover Plate;
155°F (68°C) Sprinkler, 135°F (57°C) Cover Plate
175°F (79°C) Sprinkler, 155°F (68°C) Cover Plate;
200°F (93°C) Sprinkler, 155°F (68°C) Cover Plate.
'Water Working Pressure Rating - 175 psi (12 Bars).
'Factory tested hydrostatically to 500 psi (34 Bars).
'Maximum low temperature glass bulb rating is -67°F (-550C).
'Frame - bronze • Deflector - brass ' Screw - brass
'Bulb seat - copper ' Spring - nickel alloy ' Seal - teflon
'Bulb - glass with alcohol based solution, 3mm size.
'Cover Plate - brass
'Upper Escutcheon Assembly - steel
'SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
CLASSIFICATION AVAILABLE BULB N.F.P.A. MAXIMUM CEILING
SPRINKLER TEMPERATURES COLOR TEMPERATURE
ORDINARY 13F F 155 F 57 i6Ru ORANGE/RED ion F 30 (
INTERMEDIATE 175 F200 F 5 C 53 C YELLOW/GREEN iSv F 665
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 (989) 846-4583 • FAX 989-846-9231
DECEMBER 2006 A-32 BULLETIN GL2804, REV. #5
118" ADJUSTMENT
01-LOBE
11111v
.
FIRE I-'RINKLLR
CORPORATION
OuIcK RESPONSE
A UTOMA TIC SPRINKLERS
GL SERIES
CONCEALED PEJVDENT
SPECIFICATIONS
NOMINAL "K"' FACTOR THREAD SIZE LENGTH FINISHES
2.8 (39 metric) 1/2" NPT Bright Chrome
White Painted
4.2 (59 metric) 1/2" NPT 2 1/2" (6.4 cm) Satin Chrome'
Bright Brass'
5.6 (80 metric) 1/2" NPT I Other Painted Finishes1
NOTE: METRIC CONVERSIONSAREAPPROXIMATE. FINISHESAVAILABLEONSPECIALORDER.
PAINTED PLATES OTHER THAN WHITE REQUIRE
CUSTOMER TO FURNISH PAINT.
APPROVALS
SIN K 135°F (57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C)
STYLE MODEL FACTOR WITH PLATE WITH PLATE WITH PLATE WITH PLATE cULus LPC CE
135°F (57°C) 135°F (57°C) 155°F (68°C) 155°F (68°C)
0L2804 2.8 X X X X X - -
CONCEALED GL4204 4.2 X X X X X - - PENDENT
GL5604 5.6° X X X X X X X
*LISTED FOR ALL HAZARDS.
CROSS SECTION
4 '4
ORDERING INFORMATION
SPECIFY
Quantity . Model Number • Style
Orifice • Thread Sizes • Temperature
Finishesdesired
Quantity-Concealed Wrenches- PIN 325391
Quantity -Protective Caps - P/N 327119
GLOBE® PROD UCT WARRANTY
Globe agrees to repair or replace any of its own
manufactured products found to bedefective in material or
workmanship fora period ofoneyearfrom date of shipment.
For specific details of our warranty please refer to Price
ListTemis and Conditions of Sale (Our Price List).
4077AIRPARK DRIVE, STANDISH, MICHIGAN 48658
9894846-4583 FAX 989-846-9231
1-800-248-0278 www.globesprinkler.com
DECEMBER 2006 PRINTEDU.S.A. BULLETIN GI-2804, REV. #5
QUICK RESPONSE
SURFACE SLEEVE
MOUNT & SKIRT
QUICK RESPONSE
EXTENDED RECESSED
AQ <,olo i
LABE®
FIRE SPRINKLER
W CORPORATION
DESCRIPTION AND OPERATION
QUICK RESPONSE
A UTOMA TIC SPRINKLERS
MODEL GL5635, GL8135
DRY TYPE
PENDENT
RECESSED PENDENT
The Globe Quick Response GL Series Dry Type Pendent Sprinkler is designed for
use in special applications such as freezing environments and conditions where
sediment or foreign materials might accumulate in ordinary drop nipples.
The Globe Quick Response GL Series Dry Type Pendent Sprinkler utilizes a 3mm
frangible glass ampule as the thermosensitive element. This provides sprinkler
operation approximately six times faster than ordinary sprinklers. At the ampules
rated temperature, the sprinkler opens releasing the bulb seat, causing the inner tube
and stabilizer bar assembly to move, allowing the spring assembly to pivot alongside
the inner tube. At this time, water flows through the sprinkler and is distributed by
the deflector in an approved discharge pattern. While the Quick Response Sprinkler
provides an aesthetically pleasing appearance, it can be installed wherever standard
spray sprinklers are specified but offers the additional feature of greatly increased
safety to life. Quick Response Sprinklers should be used advisedly and under the
direction of approving authorities having jurisdiction.
The heart of Globe's Model GL Series sprinkler proven actuating assembly is a
hermetically sealed frangible glass ampule that contains a precisely measured amount
of fluid. When heat is absorbed, the liquid within the bulb expands increasing the
internal pressure. At the prescribed temperature the internal pressure within the
ampule exceeds the strength of the glass causing the glass to shatter. This results in
water discharge which is distributed in an approved pattern.
TECHNICAL DATA
See reverse side for Approvals and Specifications.
Temperature Ratings - 135°F (57°C), 155°F (68°C), 200°F (93°C),
286°F (141°C).
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 Psi (34 Bars).
Maximum low temperature glass bulb rating is -67°F (-55°C).
Frame- bronze A Deflector - brass Screw - brass
Bulb seat - brass r Spring assembly - teflon coated nickel alloy and brass
Bulb - glass with alcohol based solution, 3mm , Orifice insert - brass
3/4" NPT or I" NPT 4 Stabilizer bar - bronze
Outer tube galvanized steel pipe A, Inner tube - stainless steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.PA. MAXIMUM
CEILING TEMPERATURE
ORDINARY - 0
X7 ORANGE/RED
INTERMEDIATE ' . GREEN
HIGH - - - BLUE
EXTRA HIGH '. . . MAUVE
-- -
4077AIRPARK DRIVE, STANDISH, MICHIGAN 48658 517-846-4583 • FAX 5 17-846-9 231
NOVEMBER 2000 A-25ND BULLETIN GLS 635
LISTED FFOR ALL HAZARDS.
CROSS SECTIONS
TEE WITH SAME 01111(1 SIZE
A5 SPRINXLEO THREAD SIZE *111* SlAT WAllET SIll AS SPWNKIZR ThREAD SIZE
0I. I 3/4.. I I/Y MiTE 014. 1 [.THLE 1W
EScUTCHEON SIHIWI
TWIt
iPENDENT
TEE WITH STAlE oull.E(1 SIZE AS SPRITAILER THRETOTO 511E\J fi
MW C TIE1OI0E0
[
LL
0 15/16 01*.
RECESSED PENDENT
TEE WITH SAME OUTLET SIZE
AS SPRINKLER THREAD SIZE
I' NPT-/I
C NPTJ
004. 3/C I 3/C MIII. CIA.
TWO PTIECE
ESCATESITEON
SLEEWE & SKIRT PENDENT EXTENDED PENDENT
MIN. DIR..
IN CEIUNC
I 3/4 4AM.
? MAX.
I evil, DIUM,
LOBE®
FIRE SPRINKLER
CORPORATION
QUICK RESPONSE
A UTOMA TIC SPRINKLERS
MoEL GLGL5635, GL8135
DRW TYPE
PENDENT
RECESSED PENDENT SPECIFICATIONS
NOMINAL K FACTOR THREAD SIZE LENGTH*** FINISHES
Factory Bronze
5.6 (80 metric) *Satin Chrome
I" NPT Variable Bright Chrome
STANDARD to 48" White Polyester+
8.1 (116 metric) Black Polyester+
*ad Coated
NOTE: METRIC CONVERSIONS ARt AI'PRO)UNA I
3/4' NPT IS AVAILABLE FOR 5.6K (8.1K PENDING) UPON REQUEST.
APPROVALS
*FINISHES AVAILABLE ON 5PCIAL ORDER-
UL AND C-UL LISTED FOR UP TO A 48" 'A" DIMENSION.
+AVAU.ABLE AS UL LISTED CORROSION RESISTANT WHEN
SPECIFIED ON ORDER.
5TYLE K FACTOR 135°F sr 155°F
68°C --
200°F
93°C
286°F
141°C U.L CANADIAN
U.L —.
5.6 X X --- X X X X. -
PaNDENT
8.1 X X - X X X X -
REtCESSED 5.6 X X X X -
PELNDENT 8.1 X X --- X X X X
IMPORTANTINSTALLA TION DATA
Globe GL Series Dry Pendent sprinklers should be in-
stalled in accordance with the requirements set forth in
NFPA 13. These sprinklers are to be installed using a pipe
wrench applied to the outer tube. When this is not possible.
the proper sprinkler head wrench may be used with extreme
care for lengths up to approximately IS". Excessive force
may distort the frame thus destroying the unit.
The GL Series Dry Sprinkler must not be installed in a
short radius 90" elbow. When installing in other than an iron
tee, the clearances between the end of the sprinkler and
fitting should be checked.
For further important installation data, please refer to our
Dry Sprinkler Caution Sheet.
ORDERING INFORMATION
SPECIFY
Quantity Model Number Style
Orifice Temperature Finishes desired
Quantity - Wrenches - P/N 333010
Quantity - Recessed Wrenches - PIN 333011
Escutcheons desired
"A" Dimension - Distance from face of fitting to the
finished ceiling line regardless of escutcheon used.
GLOBE® PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufac-
tured products found to be defective in material or workman-
ship for a period of one year from date of shipment.
For specific details of our warranty please refer to Price
List Terms and Conditions of Sale (Our Price list).
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
517-846-4583 FAX 517-846-923 I
1-800-248-0278 www.g1obesprinkler.com
NOVEMBER 2000 PRINTED U.S.A. BULLETIN GL5635